OPERATING INSTRUCTIONS RH 40 E Operation Safety belt
OPERATION - SAFETY INSTRUCTIONS 2804201
Operating instructions Never operate the machine before having read and understood the operating instructions.
Pay special attention to: the "Fundamental Safety Instructions" and to all warning and instruction signs attached to the machine. Familiarize yourself with the layout, the functioning and the sense of actuation of the control elements prior to starting up the machine. Activate the control elements from the driver's seat only. Keep the operating instructions with the machine at all times. Operating personnel The operating personnel must be fully informed of the operation and application of this or comparable machines. The necessary know-how can be acquired in several days' instruction, e.g. by an TerexGermany mechanic or by attending an TerexGermany operator's training course. Personal protective gear and working clothing Wear a safety helmet and working footwear with non-slip soles. Smooth soles may slip from steps and pedals resulting in injury or incorrect operation. Wear closely fitting working clothing when operating the machine. Loose, wide garments may result in control levers being inadvertently activated
BA RH40E(3 664 930.00)-EN
For machines with a safety belt for operating personnel: Check the safety belt attached to the driver's seat. In the event of damage or after an accident, have it replaced immediately. Apply the safety belt before starting work. State of the machine Operate the machine only in a safe state and only in accordance with its designated use. Always observe the safety instructions. Always have inspection and maintenance work carried out on schedule. Operate the machine only with the equipment and component combinations approved by TerexGermany. Clear-cut data are given in the technical specification. Never install and commission other equipment and component combinations without TerexGermany having first inspected and approved the project. Before starting work or travelling with the machine, check that the braking, signalling and lighting systems are fully functional. Poor visibility may result in accidents. Always clean the windows and the glass covers of all lamps before starting the machine. Check that all warning and instruction signs attached to the machine are present and legible. Entering and leaving the machine Always face the machine when entering or leaving it. Use only the ladders, steps, platforms and grab handles provided when entering and leaving the machine. Always keep ladders, steps and platforms in a non-slip, safe state and remove any oil, grease, soil, snow, ice and other foreign matter immediately.
2-3
