OPERATING INSTRUCTIONS RH 40 E

Inspection and servicing

" Unscrew plug (4, Fig. 3-76:) and fill in new oil.

" Check oil level with dipstick (1, Fig. 3-76:).

" Screw in plug (4) again.

Gearbox venting

The gearbox is vented through breather filter (2, Fig. 3-76:).

Clean breather filter in accordance with the servicing plan.

" Unscrew breather filter (2), clean in white spirit or paraffin oil and blow dry with compressed air.

" Screw breather filter (2) back in place.

Grease bearing regulary.

" Fill in approximate 20 g. grease (4 – 5 strokes) through grease nipple (5, ) by means of a hand grease pump.