OPERATING INSTRUCTIONS RH 40 F Operation STARTING AND STOPPING THE ENGINES Starting the engine
" Press button (61). Release button (61) as soon as the engine has fired. Allow engine to run at idling for at least 5 minutes before running it at full load
Start and operate combustion engines only on well-ventilated premises;
In closed rooms, exhaust gases must be evacuated to the outside. Do not work on the exhaust system an do not make any modifications to it; Exhaust gases from diesel engines and some of their constituents may cause cancer, birth defects and other reproductive harm.
Repeat the starting procedure if the engine does not fire. Repeat starting procedure not more often than 3 to 4 times. Do not operate the starter for more than 10 seconds. Shut off engine immediately : !
if the monitoring device (131, Fig. 2-40:) shows a malfunction of the engine after starting,
!
if an acoustic warning sounds from the warning device (134)
and / or if the warning lamp !
hydraulic system (135)
!
alternator (142)
lits up. Locate cause of the fault and rectify before restarting the engine.
Fig. 2-39:
" Turn speed control knob (66, Fig. 2-39:) counter-clockwise to the limit stop (idling). " Insert key into key-switch (32) and turn right.
Fig. 2-40:
2-46
BA RH40F(3 668 020.01)-EN
