1 minute read
OPERATING INSTRUCTIONS RH 40 F Operation
No.ElementFunction Symbol
131Monitoring deviceEngine monitoring Indicates different parameters on the display (E)
Use push buttons (C and D) to scroll through parameter list. Indicator lamps (A and B) lit when an active fault occurs.
132ThermometerEngine temperature Indicates the cooling-water temperature
133Pressure gaugeEngine oil pressure Indicates the oil pressure in the diesel engine lubricating system
134Warning deviceEngine monitoring Gives an acoustic warning signal if a fault is reported
! Engine oil pressure too low
! Engine temperature too high
Lower the equipment to the ground and shut off engin immediately if the warning device (134) sounds. The warning device (134) continues to sound until the fault has been retified.
135Warning lamp Not connected
136Warning lamp Not connected
137Warning lamp Not connected
138Warning lamp Not connected
139Warning lampCooling water level Lits up when the cooling-water level is too low
140Warning lampCooling water temperature Lits up when the cooling-water temperature is too high
141Warning lampEngine oil pressure Lits up when the engine oil pressure is too low
142Warning lampAlternator Lits up when the batteries are not recharged
145ThermometerDistributor gearbox Lits up when the temperature in the distributor gearbox is too high.
