OPERATING INSTRUCTIONS RH 40 F Operation

Adjusting the control consoles

Do not adjust the control consoles during travelling.

Concentrate on the road to avoid accidents.

Do not adjust the control consoles when the hydraulic pilot control is activated.

Risk of moving the control levers inadvertently and of triggering uncontrolled movements of the working equipment.

Before adjusting the consoles:

" stop the machine by releasing the travelling pedals (112 and 113, Fig. 2-17:); they will return to 0

" stand working equipment on the ground.

" stop the engine.

The control consoles on the right and left of the driver's seat can be shifted parallel to the seat by abt. 16 cm (6.3 in) forwards and backwards so that the driver can select the the position best suited to him for fatigue-free working.

Adjusting the right control console:

" Push lever (124) outwards against the pressure of the spring and maintain while shifting the console into the desired position.

" Release the lever and check that the console locking mechanism has engaged.

Adjusting the left control console:

" Push lever (123) outwards against the pressure of the spring and maintain while shifting the console into the desired position.

" Release the lever and check that the console locking mechanism has engaged.