INSTRUMENTS/CONTROLS
SYSTEMS DISPLAY AND CONTROL PANEL 4
5
6
1
2
3
BD00J056
!
WARNING: The display panel indicates the machine’s condition and alerts the operator quickly of any abnormalities by means of lamps indicators or buzzers. It is not to be used for determining the time for maintenance operations.
TRIM THIS EDGE
NOTE: Wipe the display panel with a soft, dry cloth. Do not use solvents. 1. TRAVEL SPEED SELECTOR - This is a push button for changing from high speed to low speed and low to high. A confirmation message appears on the indicator (4).
!
WARNING: All changes in travel speed should be made while the machine is stationary, otherwise a change in the direction of travel can be caused.
Low speed (I), 0 to 3.3 km/hr (0 to 1.3 mph) Select this speed to travel on slopes, rough ground or soft terrain. High speed (II), 0 to 5.5 km/hr ( 0 to 2.1 mph) Select this speed to travel on hard, flat ground in good terrain conditions. NOTE: When starting the engine, low speed is automatically selected. NOTE: When the hydraulic system is overloaded and the machine is in 2nd speed, the machine automatically changes down to 1st speed. The system automatically returns to 2nd speed as soon as the hydraulic system is no longer overloaded. 2. WORKING MODE SELECTOR - This push button allows one of three working modes to be selected. “S” (standard) mode for ordinary duties; “H” (heavy) mode for hard work or when there is an increase in work load and “L” (lift) mode for precision work requiring lower operating speed. Confirmation of the mode selected is displayed on the indicator (5). NOTE: The selector will not function when “Auto” mode (3) is selected. NOTE: When starting the engine, “Auto ” mode is automatically selected. 48
TRIM THIS EDGE LEFT PAGE Bur 6-25940
