INTERVALS

PAGE SERVICE POINTS NB OF POINTS INTERVALS IN HOURS

CLEAN REPLACE CHECK GREASE

145 Engine oil level 1 500 10 149 Coolant level 1 10 156 Hydraulic reservoir level 1 10 148 Radiator and oil cooler 1 250 10 139 Attachment 18 50 151 Drain fuel tank sediment 1 50 151 Drain water separator 1 50 164 Hydraulic system lines - 50 166 Primary air filter element 1 250 (B)1000 (C)250 (B) 166 Secondary air filter element 1 1000 (G) 172 Travel reduction gears oil level 2 1000 250 179 Track shoe bolt - 250 (D) 179 Idler wheel and rollers - 250 186 Air conditioning - 250 250 (E) 189 Bolt and nut torque - 250 (D) 193 Batteries electrolyte level 2 250 140 Turntable bearing 1 500 141 Turntable bearing teeth 1 500 146 Engine oil filters 2 500 152 Fuel filter 1 500 155 Hydraulic fluid condition 1 1000 158 Pilot filter 1 1000 (F) 161 Breather filter 1 1000 169 Swing reduction gear oil level 1 1000 250 141-142 Swing reduction gear 1 5000 172 Travel reduction gears 2 1000 250 158 Suction filter 1 2000 5000 159 Return filter 1 2000 (F) 150 Ultra Clean filter 1 2000 156 Hydraulic fluid 1 5000 89 Load holding control cylinder mounted devices (optional) 2 (I) 149 Cooling system 1 2000 175 Tracks 2 (K) (K) 181 Fuel tank filter 1 (K) 181 Machine inspection - (K) (K)

(B) Or when the central zone of the restriction indicator is red. (C)Or after cleaning 6 times. (D)Check after the first 50 hours during the run-in period. (E) Have this checked by a specialist every 6 months. (F) Replace after the first 50 hours during the run-in period. (G)Or after cleaning the primary air filter element 3 times. (H)Drain after the first 250 hours during the run-in period. (I) Have this checked by your CASE Dealer every 6 months. (J) Every year or every 2000 hours. (K) Periodically. (L) Check once a month and have it checked every 6 months by a specialist. NOTE: Once the machine has completed 500 hours (then 1000 hours, 1500 hours, etc...) the message “Service due” will appear on the screen by way of a reminder that service work is due. See “Systems display and control panel” (item 10), in the “Controls/Instruments/Accessories” Section.