ADJUSTMENT/MAINTENANCE
DRIVE BELT SERVICE SPECIFICATIONS TENSION CHECK The drive belt for the engine cooling fan is adjusted by an automatic tension pulley. It is not necessary to check the tension with a tension gauge.
REPLACING DRIVE BELT Replace the drive belt if you see any of the following: cuts, cracks, loose cords, grease, oil, or twisting. 1. Install a 1/2 inch breaker bar in the bracket for the tension pulley. 2. Use the breaker bar to move and hold the tension pulley away from the drive belt. 3. Remove the drive belt. 4. Install the new drive belt.
TRIM THIS EDGE
5. Release the tension pulley. 6. Remove the breaker bar.
180
TRIM THIS EDGE LEFT PAGE Bur 6-25940
