DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1.
Press F2 during boot to enter the Setup Menu.
2.
Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
Information
Main
Security
InsydeH20 Setup Utility Boot Exit
Rev. 3.5 Item Specific Help
Boot priority order: 1. 2. 3. 4. 5. 6.
IDE0 : Hitachi HTS545032B9A300 IDE1 : Network Boot : Atheros Boot Agent USB HDD USB CDROM : USB FDD :
F1 Help ESC Exit
3.
Select Item Select Menu
F 5 / F 6 C h a n g e Va l u e s SubMenu Enter Select
Use < > or < > to select a device, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu
F9 F 10
Setup Default Save and Exit
Execute the FLASH.BAT batch file to update BIOS. Or enter C:\ Flash it bios ver.fd/dc
The flash process begins as shown.
4. In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays.
Plug in the AC power to continue. 5.
34
Flash is complete when the message Flash programming complete displays.
Chapter 2
