Fuel/Lubrication/Cooling Carburetor ! WARNING Whenever any maintenance or inspection is performed on the fuel system during which there may be fuel leakage, there should be no welding, smoking, open flames, etc., in the area.
KC0018
5. Remove the screw securing the throttle actuator cover to the carburetor; then remove the cover.
REMOVING
1. Remove the seat. 2. Remove the cap screws securing the air filter housing to the frame; then loosen the clamp securing air inlet boot to the carburetor.
PR154B
6. Remove the throttle cable from the actuator arm.
KM320A
3. Turn the gas tank valve off; then clamp and pinch off the fuel inlet hose to the carburetor. Remove the two fasteners securing the gas tank valve to the gas tank mount. Slide the fuel filter off its mount.
PR162C
7. Loosen the outer jam nut securing the throttle cable to the carburetor body; then route the cable out of the way.
KM959
4. Remove the choke assembly from the carburetor leaving the choke cable attached to the choke plunger.
PR162B
64
