Western 16, July 31, 2022

Published Nationally

$3.00

®

Western Edition

July 31 2022 Vol. XXIII • No. 16

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Concrete Lining Stops Canal Seepage Construction crews from Brosamer & Wall Inc. (B&W) have completed work on the second phase of the $52 million Florence Canal Reach 2 Rehabilitation and Lining Project.

The firm is aiming to complete the rest of the Pinal County, Ariz., project checklist by January 2023.

The project is based on concerns of excessive seepage losses. The primary purpose of the project is to address agricultural water management, supply and conservation issues affecting the San Carlos Irrigation And Drainage District (SCIDD).

This major initiative has B&W crews excavating approximately 300,000 cu. yds. of earth and rock and installing approximately 25,000 cu. yds. of concrete lining. The concrete is being supplied by CEMEX, which has a nearby plant.

What makes this project unique is the material that is being used. The SCIDD dries the canal twice a year — in mid-October for six weeks — and then returns the water for four weeks, followed by another five dry weeks.

“We put in long hours during those weeks to ensure everything was done within the timeframe,” said Russell P. Gonzalez, B&W’s project engineer. “We used a 3,000 PSI mix for the concrete. With these types of canals, it requires a certain level of air for the mix and a fiber in the substrate of the concrete that one does not normally see in Brosamer & Wall Inc. recently completed the $52 million second phase of the other projects.”

Florence Canal Reach 2 Rehabilitation and Lining Project in Arizona by utilizing a

By Irwin Rapoport

CEG CORRESPONDENT

Crews Use Dish Soap to Perform Bridge Slide...8

Leeboy Names Dealer Award Winners...30

Beth Bartow’s Career Spans Decades, Two Continents..56

see CANAL page 62

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Paving Section . . . . . . . . . . . . . . . . . . . . . . . . . .23-37 Backhoes & Attachments Section . . . . . . . . . . .39-46 Auction Section . . . . . . . . . . . . . . . . . . . . . . . . .64-71 Business Calendar . . . . . . . . . . . . . . . . . . . . . . . . . .69 Advertisers Index . . . . . . . . . . . . . . . . . . . . . . . . . . .70

3,000 PSI mix for concrete, a material not usually seen in similar projects.

Helping Hand or Labor Chokehold?

Biden PLAs, Apprenticeship Mandates Meet Industry Opposition The Biden administration has a plan to create a highly skilled diverse workforce to complete infrastructure projects over the next decade. It involves diverting federal funds toward contractors and grant applicants who partner with labor organizations. Industry groups and labor unions can’t see eye to eye on how that will happen.

Biden’s idea is to encourage job training programs in certain sectors in order to benefit communities and groups lagging in maledominated trade industries.

By Lucy Perry

CEG CORRESPONDENT

see PLA page 14

President Biden’s mandate will make it harder for general contractors to subcontract with small, disadvantaged businesses, said the AGC.

Page 2 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

OUTSTA ANDING

OUTLASTS OUTP POWERS S OUTM MUSCLES OUTP PERFORM MS ,

% # & # ™ $ # !" "

!

! !+ * ! ( + * ! ! !+ ) ! * ) ' ( 1 * !* 0

-

/

" & "! !%$#" "! !

5

4 4 4

4 4 4

4 3

, 2 2

4 4 637 4 8 4 3

.

9 9 9 9 9 *

( )

; ;

" < = + ? @ ? ?

: # ' $ >

A

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 3

2017 Komatsu D155AX-8, Stk#: 13028, EROPS, A/C & Heat, Radio, St./Tilt Blade, 10,459 hrs., 80% U/C, 24" Pads, Komatsu 3 Shank Ripper, Komatsu Eng., 13 ft. Wide ..................$169,500

1990 John Deere 550G, Stk#: 13103, OROPS, Sweeps, 6 Way Blade, 3,638 hrs., 17" Pads, 8' 7" Wide ......................................................$32,500

"In Business for over 36 Years" www.hendrixmachineryllc.com Se Habla Español

2013 Bomag BW145D-40, Stk#: 13145, OROPS, 56" Smooth Drum w/Vibrate, 844 hrs., 335x80Rx20 Tires..................................$39,500

2015 Dynapac CA1500, Stk#: 12526, EROPS, A/C & Heat, AM/FM Radio, 66" Smooth Drum, 764 hrs., 14.9x24R3 Tires, 4 Cyl. Deutz..$69,500

2019 Kobelco SK260LC-10, Stk#: 13190, EROPS, A/C & Heat, Radio, 2,678 hrs., 85% U/C, 31" Pads, 42" Bucket w/Hyd. Thumb, Aux. Hyd., Screen on Front Glass ................$169,500

1-936-327-5430 • Email: sales@hendrixmachineryllc.com

2018 Cat 335 FLCR, Stk#: 13147, EROPS, A/C & Heat, Radio, 3,466 hrs., 85% U/C, 33" Pads, 2018 John Deere 850K LGP, Stk#: 13234, 52" Bucket, Aux. Hyd., Cat Quick Connect .......... EROPS, A/C & Heat, Radio, 6 Way Blade, 6,475 ............................................................$239,500 hrs., 35" Pads, 13' 7" Blade ................$179,500

2019 Cat 303.5E2CR, Stk#: 13216, OROPS, 2015 Cat 12M3, Stk#: 12898, EROPS, A/C & Heat, Radio, 7,024 hrs., Front, Hyd., 14 ft. M/B, 1,742 hrs., 75% U/C, 12" Digging Bucket, 12" Ripper, 17.5x25 Tires, 90% Tires ........$149,500 Rubber Tracks, 70" Front Push Blade ....$36,500

2018 John Deere 5075E, Stk#: 13237, EROPS, 1998 Cat D5C XL, Stk#: 13227, OROPS, 6 Way A/C & Heat, Radio, 571 hrs., MX7 Bush Hog, 73" 2019 John Deere 650K, Stk#: 13241, OROPS, 6 Blade, 39 hrs., 18" Pads, 8' 5" Blade, w/ Ripper .. Bucket, 9.5x24 Front Tires, 16.9x28 Rear Tires .. Way Blade, 4,429 hrs., 24" Pads, 10' 4" Blade...... ..............................................................$36,500 ..............................................................$46,500 ..............................................................$89,500

2018 John Deere 650K LGP, Stk#: 12883, EROPS, A/C & Heat, Radio, 6 Way Blade, 2,550 hrs., 80% U/C, 24" Pads, 10' 4" ft.Blade$109,500

2014 Cat 120M, Stk#: 13180, EROPS, A/C & 2019 John Deere 750K LGP, Stk#: 13235, Heat, 4,265 hrs., Reverse Camera, Joystick EROPS, A/C & Heat, Radio, 6 Way Blade, 5,580 Controls, 14" M/B, 5 Shank Rear Ripper, hrs., 33" Pads, 12 ft. Blade ..................$159,500 17.5Rx25Tires......................................$139,500

2009 Cat 324DL, Stk#: 13185, EROPS, A/C & Heat, Radio, 7,625 hrs., 36" Bucket w/Hyd. Thumb ..................................................$76,500

2017 Komatsu D155AX-8, Stk#: 13028, EROPS, 2018 John Deere 650K LGP, Stk#: 13022, 2014 Cat D6T LGP, Stk#: 13232, EROPS, A/C & A/C & Heat, Radio, St./Tilt Blade, 10,459 hrs., 2020 Cat D5K, Stk#: 13161, OROPS, 6 Way EROPS, A/C & Heat, Radio, 6 Way Blade, 4,265 Heat, Radio, 6 Way Blade, 10,090 hrs., 31" Pads, 80% U/C, 24" Pads, Komatsu 3 Shank Ripper, Blade, 2,757 hrs., 25" Pads, 10' 5" Blade ............ hrs., 90% U/C, 24" Pads, 10 ft. Wide.. $109,500 Ripper, 13 ft. Blade ..............................$139,500 Komatsu Eng., 13 ft. Wide ..................$169,500 ..............................................................$98,500

2018 Kubota L2501-DT, Stk#: 13222, OROPS, 106 hrs., 4WD, Aux. Hyd., 65" Bucket, 63" Bush Hog, 27x8.50x15NHS Front Tires, 15x19.5NHS Rear Tires ..............................................$21,500

2018 Cat D5K2 LGP, Stk#: 13233, EROPS, A/C & Heat, Radio, 6 Way Blade, 2,618 hrs., 26" Pads, 10" 6" Blade................................$129,500

2018 John Deere 650K LGP, Stk#: 13023 EROPS, A/C & Heat, Radio, 6 Way Blade, 4,070 hrs., 85% U/C, 24" Pads, 10 ft. Wide ..$109,500

2019 Linkbelt 245X4LC, Stk#: 12843, EROPS, 2019 John Deere 650K, Stk#: 13241, OROPS, A/C & Heat, Radio, 5,048 hrs., 31" Pads, 24" 6 Way Blade, 4,429 hrs., 24" Pads, 10' 4" Blade Bucket..................................................$129,500 ............................................................$89,500

2018 CAT 335 FLCR, Stk#: 13147, EROPS, A/C & Heat, Radio, 3,466 hrs., 85% U/C, 33" Pads, 1998 Cat D5C XL, Stk#: 13227, OROPS, 6 Way 52" Bucket, Aux. Hyd., Cat Quick Connect............ Blade, 39 hrs., 18" Pads, 8' 5" Blade, w/ Ripper .. ............................................................$239,500 ..............................................................$36,500

2005 Cat D8R, Stk#: 13072, EROPS, A/C & Heat, Radio, 6 Way Blade, 4,731 hrs., New U/C and Certified Rebuild, 27" Pads, 12' 8" Wide..$199,500

2008 Cat D6T XW, Stk#: 13119, EROPS, A/C & 2018 John Deere 750K LGP, Stk#: 13236, Heat, Radio, 6 Way Blade, 8,532 hrs., 90% U/C, EROPS, A/C & Heat, Radio, 6 Way Blade, 5,337 26" Pads, 13' 6" Wide ..........................$169,500 hrs., 33" Pads, 12 ft. Blade ..................$159,500

2018 John Deere 5075E, Stk#: 13237, EROPS, A/C & Heat, Radio, 571 hrs., MX7 Bush Hog, 73" Bucket, 9.5x24 Front Tires, 16.9x28 Rear Tires ......................................................$46,500

2018 CAT 325 FLCR, Stk#: 13148, EROPS, A/C & Heat, Radio, 4,509 hrs., 70% U/C, 31" Pads, 52" Bucket, Quick Connect ..................$178,500

2019 Cat 303.5E2CR, Stk#: 13216, OROPS, 1,742 hrs., 75% U/C, 12" Digging Bucket, 12" Rubber Tracks, 70" Front Push Blade ....$36,500

2015 Cat 12M3, Stk#: 12898, EROPS, A/C & Heat, Radio, 7,024 hrs., Front, Hyd., 14 ft. M/B, Ripper, 17.5x25 Tires, 90% Tires ........$149,500

2018 John Deere 850K LGP, Stk#: 13234, EROPS, A/C & Heat, Radio, 6 Way Blade, 6,475 hrs., 35" Pads, 13' 7" Blade ................$179,500

2017 Cat 930M, Stk#: 13105, EROPS, A/C & Heat, 12,922 hrs., 3.5 Yard Bucket, Power & Heat Mirrors, 20.5x25 Tires ..................$96,500

2013 JCB VM75D, Stk#: 12992, OROPS, 66" Smooth Drum, 521 hrs., 14.9x24 Rubber Tires, JCB TC63 Engine ..................................$46,500

Page 4 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE

®

WESTERN EDITION Circulated Throughout

• Alaska • Arizona • California • Colorado • Hawaii • Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

To read these stories and many more, visit www.constructionequipmentguide.com

8

48

8

FEATURES

60

CONSTRUCTION CREWS TURN TO DISH SOAP TO AID BRIDGE SLIDE

The Utah Department of Transportation recently slid a 1.1-million-lbs. bridge into place using dish soap to smooth the slide via a hydraulic system. The entire accelerated bridge construction took approximately one year to complete.

8

H-E-B PLEDGES $10M FOR ROBB ELEMENTARY CONSTRUCTION

23

56

HAMM: OFFERING SUSTAINABLE SOLUTIONS AT EVERY LEVEL

BETH BARTOW’S LIFELONG CAREER SPANS DECADES, TWO CONTINENTS

H-E-B chairman Charles Butt and the Butt family, as well as H-E-B stores, have pledged a combined $10 million donation for the construction of a new elementary school in Uvalde.

A year after receiving environmental certification according to ISO 14001, it is clear that Hamm AG, based in Tirschenreuth, Germany, is in a good position in terms of environmental protection.

The Case business manager southeast’s first job in high school, unbeknownst to her, would be the start of a lifelong career that would span decades and several countries around the globe.

12

30

60

CUMMINS PROMOTES JENNIFER RUMSEY TO PRESIDENT, CEO

LEEBOY ANNOUNCES ITS DEALER AWARD WINNERS

Cummins Inc. announced that effective Aug. 1, 2022, Tom Linebarger will end his term as chief executive officer (CEO) and Jennifer Rumsey, president and chief operating officer (COO), will assume the role of president and CEO.

LeeBoy recently announced the winners of its 2021 Dealer Awards. Top overall sales dollars for all products winners include Ambrose, Stepenson Equipment, Ascendum, Nixon-Egli and Reynolds-Warren.

12

34

MANITOWOC WITHDRAWS FROM CONEXPO-CON/AGG 2023 SHOW

NAPA UNVEILS EMISSIONS INVENTORY FOR ASPHALT PRODUCTION

GENERAC OFFERS DUST FIGHTER 15000, 20000 AS DUST SUPPRESSION SOLUTION

Common demolition practices, such as implosions and concrete crushing, send massive amounts of harmful dust particles into the atmosphere. Dust suppression cannons are one of the best ways to combat this hazard.

BACKHOE SECTION

Manitowoc announced its withdrawal from the ConExpo-Con/AGG 2023 trade show. The company noted inflation as one reason and plans to host a Crane Days event at its Shady Grove, Pa., location.

Cradle-to-gate emissions associated with asphalt mix production in the United States represented approximately 0.3 percent of total U.S. greenhouse gas (GHG) emissions in 2019.

40

CONSTRUCTION EQUIPMENT GUIDE’S BACKHOE CHARTS

15

48

44

DEERE IMPROVES PERFORMANCE WITH ITS L-SERIES UPGRADES

GOVT-REGISTERED APPRENTICESHIP PLAN WON’T MEET DEMAND

KOMATSU, CODELCO CONDUCT TRIAL OF MINING TUNNEL BORING MACHINE

It would take 14 years for federal and state government-registered apprenticeship programs to educate the 650,000 workers the construction industry needs to hire just in 2022, according to an ABC analysis of 2021 data.

Komatsu Ltd. has agreed with Codelco to collaborate on trialing a new tunnel excavation method using Komatsu’s newly developed mining tunnel boring machine (TBM) starting in 2024 at Codelco’s Chuquicamata Mine in Chile.

17

52

CGA NAMES NEW VEEP OF ITS DAMAGE PREVENTION INSTITUTE

CATERPILLAR ANNOUNCES MULTI-YEAR SPONSORSHIP OF MLS

CGA, the national nonprofit trade association dedicated to protecting underground utility lines, people who dig near them and their communities, announced Sam Hall will join the organization as the vice president of the DPI.

With the highest percentage of millennial and multicultural fans of any U.S. sport, the sponsorship is designed to amplify the Caterpillar brand to a broader, more diverse audience in the United States and Canada.

20

52

BIZ ESTABLISHES DIGITAL STOREFRONTS WITH LOCAL SUPPLIERS

Soil Connect is rolling out a QuickStart program to partner with local construction materials suppliers — including quarries, recycling facilities, landscape suppliers, asphalt and cement plants, and sand and gravel locations.

Founder Emeritus (1930-2021) Edwin M. McKeon Sr. Western Publisher Dennis Hogeboom Executive Publisher Teddy McKeon Editor In Chief Craig Mongeau Senior Editor Robby Chakler Editorial Assistant Katherine Petrik Production Mgr. John Pinkerton Controller Judith Nixon Circulation Mgr. Cathy Printz Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910

www.constructionequipmentguide.com

Web site

Advertising e-mail production@cegltd.com

Mobile

LinkedIn

Facebook

Twitter YouTube

RINGKOB ADVISES ON HOW TO OVERCOME BUSINESS BOTTLENECKS

Jeani Ringkob founded StoryBuilt Growth Strategy & Marketing after nearly a decade in the asphalt paving business and has helped several businesses grow and develop in the construction world.

DEPARTMENTS 64 69

COMING AUCTIONS BUSINESS CALENDAR

EQUIPMENT 23 24 32

HAMM Sustainable Paving Solutions DYNAPAC Highway Class Paver Range BOMAG BM 2200/65 Large Planer

For advertising rates Contact

Dennis Hogeboom

Kent Hogeboom

Sharon Swanson

Patrick Kiel

• Colorado • Louisiana • Oklahoma • Texas • New Mexico

National Sales Manager

• Alaska • Arizona • California • Idaho • Nevada • Oregon • Utah • Washington

Key Accounts Manager

Cell 760-518-4336 e-mail sswanson@cegltd.com

952/353-1770 Cell 612/481-8557 e-mail pkiel@cegltd.com

Cell e-mail

602/679-8759 dennishogeboom@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034.

Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2022, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

• Montana • Wyoming

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 5

563-8 872-4 41112 Bellevue (Dubuque), Iowa sales@jjjscheckel.com RENT OR

BUY!

2016 CA AT D11T Rebuild - $1,485,000 , b ld In Process. Zero Z Hourr,, CCAT AT certified AT fi d PPow wertrain rebuild w/ 4 yearr,, 6,000 hr warranty.y U Blade, SSS Ripper pp r,, 100% N UC. Excellent history. Available Suummer 22022.

New

2019 CA AT 336 Next Gen - $268,000 $ ,

3,700 Total hours, 1,486 Idle hours, Auxiliary ili y hydraulics, 2D Grade control. 10’6””Stickk, 54”” Bucket, Documented history,y, Very clean machine.

2020 Deere 744L - $3448,000 ,

2,930 Hours, H E d d ffactoryy warraantyy tillll 2026 Extended or 6,000 hours, 5.5 Ya k Ride Yard GP bucket, R control,l Excellent condition, Original paint. p

2014 CA AT D11T - $$788,000

l Documented D A03091. 7,691 HHours on Cat C De Dealer Rebuild. JEL Series, U blade, SSS Ripper pp r,, Like new track group. Very clean unit with w h ffullll history.

2018 CA AT M318F - $218,000 $ ,

2013 CA AT D11TT - $788,000 $

2015 CA AT MH30059 - $348,000 ,

(3)2017 CA ATT 9772M’s - $248,000 , Ea.

2009 CA ATT 963D D- $148,000 ,

((2)2008 ) CA ATT 7740’s - $188,000 , EA.

A hy d 10,955 Total hours, 3,614 at Idle, I 7,341 341 AActuall working ~9,000 totall fframe hoours, 5,000 hours Wheeled excavatorr,, 475 total hours, Aux hydraulics, h at idle, dl 4,000 Hy tilt Variable adjustable j boom, 8’6””SStick, 60”””Hyd hours. Ground access high g riise cab, 325 HPP,, 35’ Boom, Actual workingg hoours, 6.25 yard GP buckets, le or magnet, 130,000 lbs. bucket, k Outriggers, O i P h bl Push blade, d Su Super clean machine. 29’’ Stick, Setup for grapple ili Documented hi history,y, Low L utilization machines.

2019 Volvo L260H - $278,000 ,

b k 7,320 Hours, 22,333 333 IIdle dl hhours, 9..5 Ya Yardd GP bucket, Ride control, 875 Radial tires, Deealer maintained, Documented history,y, Super clean.

A03011. 5,435 Hours, 1,226 Idle dl hhours, Original igi ppaint, Yard GP buccket w/ teeth. Good U/C, Enclosed cab, 3 Ya G d U/C Straight, clean & original with w documented history.

( ) (2)2022 Holmes 30T Dump p Wagons 2016 CA AT 836K - $488,000 $ 2015 CA AT 836K K - $$458,000 Year Factory Warranty Remaininngg, 7,050 total frame 1 Ye Year factoryy Warrantyy remaainingg, 8,275 To Totall hours, $54 E Fabricated from usedd ADT chassis. 1 Ye $54,500 ,500 Ea. HHyyddraulic l brakes, b k Standard bull hitchh with 360° oscillation, HD jack stand, Good tires, Veery nice units. ll

B POWERTRAIN PLUS REBUILDS

2014 CA AT D6T X XW VP PA AT - $348,000 , 2014 CA AT D D6T XW VPAT AT - $248,000 ,

l Documented D A03090. 7,984 Hours H on Cat DDealer A03081. Onlyy 1,750 Original g hours. Rare R low l hhour $717,000 Full Rebuild invoiice. JEL Series, U blade, machine w// pr p e-DEF DEF eemmisions. g i i Cllean and original SS Ripperr,, Like new UC. Very clean unit w/ full history. w// excellent ll undercarria age. ARO GPSS Ready.

R d RRent/Buy. d /B

B1P Series, S i 5,000 d l bare b frame 5 00 hoours on CAT CAT AT dealer f documented rebuild. Good tires. Matchingg ppairr..

A/C and Heat. Taillgates available for addt’l dd ’l $$.

2011 CA AT 1400M VHP - $228,000 $ ,

dl A03080. 7,3600 Total hours, 2,201 Hours at idle.

5,159 Actual workingg hours. Comes with full ripperr..

GPS equiipment. Multi-shank M li

2015 CA CAT 950M - $168,000 ,

A03058. 4,940 Hours, H 2,229 Idle hours, h 2,711 2 711 Actual A workingg hours, M Yard Matchingg Bridgestone tires, 4.5 Ya b k OOriginall paint, i Documented GP bucket, D history.

2016 CA CAT 725C - $248,000 ,

7,850 Total fraame hours, 3,207 IIdle dl hhours, 4,643 Actual workingg hours h . Good tires, Original g condition, Matching il b hi g pairi of 725C trucks available.

2015 Case IH Steiger g 620 Quadtrac Q

ly 284 & KVerified 735 total houurs, 451 Idle dl hhours, Only S p PkgPkg $518,000 $518 000 K-Tec e 12288 Scraper 3388 hou i oper id 3,900 Hrs hours, Documented Service i histo hi oryy since new. Clean 2,937 at idle, onlyy 5,338 h urs in p ation. Service actual workingg hours. From state DOT,T, Store iinside. k . 2012 28 yardd H on Quadt Q dtrac, 100% NNew tracks cab, Excellent feet, Tested, andd ready d to work. history since new. EExcellent ll fe feet. Clean, Cl ready to work. 14’’ Moldboard, Mid-m Mid ount Scarafier V Ripperr.. Tier 3. Eject scraperr.. Extreemely clean & well maintained i d units.

ADES R HOLMES SMOOTH DRUM ROLLERBL

NEW! Ready to ship!

Holmes 11F - $29,50 , 0 / 16F - $36,500 2015 K-TEC 12333 - $148,000 , 2014 K-TEC 1233 - $1448,000 , (2)2014 ) K-TTeec e 1233’s - $$178,000 EA. 36 YYaard capacit p y ppullll scrappperr,, very nice & clean.

36 YYaard capacit p y ppulll scraper p r,, very nicce & clean.

Diirect mount ppullll scrapers. p 33 Ya Yardd capacity p y heaped, h pd l l 2 Models, 11’or ’ 16’’ cuttingg width. Made in Iowa.

2006 CA ATT D10T Frame-Off rame Offf Rebuild Construction gr m tchingg pair p i available.

Comes with j ystick y i k controlsl , harnesss & hitch for 20 Ya Yard strucck. Very V y nice and clean scrapers p i h jo d y. For haul road & site Low hour use. We hhave a ma g ade, extreme dut 400 HP Truck. Volvo A40 A40. EEstima i tedd 11,400 hrs use. Reaar push block. with low time use u since new. 12 fftt Cutting width. id leveling, compacting & sealing dir di t prior to rain event. Rear push block. Recommenndedd for 400+ - $998,000. , Readyy now w,, Power e train Plus R b ld, OEM CAATT Warranty. New UC, Frame-Off Rebuild U Blade, SS Ripperr,, Pre-emissioons!

visit

c eckel.com JJSch

and w watch our new company viddeo!

The fastest grow wing choice for

Large Equipm ment Rental Delivered Nationwide. We are easy to work with & will not be beaat on price and terms!

Large Dozers - Cat D8T,T, D9TT,, D10TT,, D11T Large Excavators - Cat 374FLL, 390FL Truck Fleet - Cat 740/745, & Volvo A40G Compaction, Wheel Loaderss, and much more.

WE OWN WHA ATT WE W ADVERTISE!

call: 5663-872-4112 63 872 4112 | email: sales@ @jjscheckel @jjscheckel.com com | www. jjsscheckel.com scheckel com | follow us ffoorr daily updates:

Page 6 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Kirby-Smith Machinery KSM Promotes Gavin Cole to Hires Gaines as VP of Parts Vice President of Sales Role Kirby-Smith Machinery Inc. (KSM) has hired Wade Gaines as its new vice president of parts.

Gaines will provide strategic oversight of KSM’s parts operations, while also establishing new vendor relationships and growth opportunities. He has more than 31 years of experience in the heavy equipment industry, most recently serving in various parts sales management roles for Komatsu America Corporation.

Gaines also brings significant experience related to equipment distributor and rental company operations to his new role.

Brad Campbell, vice president of product support, is excited to add Gaines’ leadership to what is already an experienced parts team.

“Wade is a skilled leader and patient listener who understands how to find the best outcomes to support his people. I know he will be a great complement to the exceptional parts leadership we have assembled at Kirby-Smith Machinery.”

Gaines’ office will be located at the heavy equipment distributor’s Fort Worth, Texas, location. He credits the strength of KSM’s

Wade Gaines

leadership, the company’s long-term success and the overall culture as major factors in his decision to make the move back to distributor side of the industry.

“I am honored to join Kirby-Smith Machinery and excited to be part of a great company with excellent leadership and quality people. I look forward to the challenge of strengthening and growing what is an already successful business,” said Gaines.

For more information, call 888/861-0219 or visit kirby-smith.com. 

Kirby-Smith Machinery Inc. (KSM) has promoted Gavin Cole to the role of vice president of sales.

Cole will be responsible for managing the direction of Kirby-Smith Machinery’s corporate sales strategy to support organizational objectives related to its continued growth. He joined the heavy equipment distributor in 2020 as sales manager for Fort Worth, Waco and Abilene.

Cole brings nearly 30 years of senior-level sales management to his position and is extremely familiar with KSM’s markets and customer base. Jeff Weller, chief operating officer for KSM, said that promoting Gavin Cole Cole was an easy decision.

“In the brief 18 months that Gavin has served our company as sales manager, he has continually proven to be a transformational leader for his sales force,” said Weller.

“Gavin will now have the opportunity to

instill that same leadership throughout the KSM enterprise as Vice President of Sales.

“I have personally known Gavin for several years and have always appreciated his passion for doing the right things for his people, customers and the company. Gavin will undoubtedly bring a new standard of excellence to our sales team.”

Cole looks forward to the opportunity to work more closely with KSM’s overall sales team and customers.

“The most rewarding part of working at Kirby-Smith Machinery is the engagement with our great team of employees,” said Cole. “In my new role, I look forward to continuing our growth and sharing our 1KS culture with our customers in the Oklahoma, Texas, Kansas and Missouri markets. One Mission, One Team, One Plan and One Goal.”

For more information, call 888/861-0219 or visit kirby-smith.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 7

E U L A VTTOO TTHHEE MAX E SAL E G H T IN FTER HIPP S A T D FAS UCT MIN D D F E O N O R EA CE T TIM YP S T I R FRE L I PEA F A THE A QU T R H O F G F I TAF IT R ICE S R T E P E G ABL FAIR WE DGE E L NOW K O T ESS ACC

A

A E RE H T T YS A A W AL UE .

L A V EAT R G YS A LWA

1-800-719-4160

DY!

Page 8 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

H-E-B Pledges $10M for Robb Elementary Construction H-E-B chairman Charles Butt and the Butt family, as well as H-E-B stores, have pledged a combined $10 million donation for the construction of a new elementary school in Uvalde.

“Our first store in Uvalde opened in 1959 and Uvalde people are our people,” Butt said in a press release. “As we continue to mourn tremendous loss, I join my family and H-EB in working to ensure the Uvalde community can move forward from this tragic event.”

In addition to the H-E-B donation, two Texas-based firms, Huckabee and Joeris, will aid in the design and construction of the school and plan to waive fees for their architectural work and contracting services.

The news came alongside the announcement of the new Uvalde CISD Moving Forward Foundation, a 501c3 non-profit established by the San Antonio based law firm Walsh Gallegos Treviño Russo and Kyle to provide an avenue for donors to contribute to the project. The non-profit board members and the name of the executive director have not been released yet.

“We will never forget those who were senselessly taken from us on that tragic day, and we want to honor their legacy as we work to build our future,” said UCISD

superintendent Hal Harrell.

The location and design of the new campus, which grades will be served, or the timeline for the project have not been determined, but Harrell said there will be community workshops in the future where attendees provide input on design choices and planning.

The direction of the new campus, per the press release, includes significantly enhancing educational offerings, implementing safety and security measures and infrastructure to support the availability of new technology.

“As part of the process, the foundation will work in tandem with the school district, the Uvalde community, donors and other stakeholders to solicit ideas and gather feedback for the elementary campus and any future projects,” reads the press release.

Once the elementary school is fully funded, any remaining funds will support the ongoing future maintenance and operations of the new school, and other district needs and initiatives.

Harrell said funding also may be used in the future to develop a memorial at the Robb Elementary school site. He said this initia-

tive is under construction and open to community input.

Contributions to support the project can be made online at uvaldecisdmovingforward.org.

In May, H-E-B also announced a $500,000 commitment to support victims and the families affected by the May 24 school shooting. The H-E-B tournament of champions, in June, also announced a $500,000 donation to support non-profits providing assistance in Uvalde. 

Reddit photo

H-E-B- photo

In May, H-E-B also announced a $500,000 commitment to support victims and the families affected by the May 24 school shooting.

In addition to the H-E-B donation, two Texas-based firms, Huckabee and Joeris, will aid in the design and construction of the school and plan to waive fees for their architectural work and contracting services.

Construction Crews Turn to Dish Soap to Aid Bridge Slide The Utah Department of Transportation recently slid a 1.1-million-lbs. bridge into place using dish soap to smooth the slide via a hydraulic system.

The entire accelerated bridge construction took approximately one year to complete, but the soap-enhanced portion was completed in four hours.

Last year, UDOT built a center bridge between the north and southbound freeways.

Northbound traffic was diverted to the center bridge as the northbound bridge was demolished and rebuilt, according to the release.

After which, southbound traffic was shifted to the center while crews demolished the existing bridge and rebuilt the support structure that would hold the new bridge deck, according to Resident Engineer Tyrell Wood.

“So, that center bridge will no longer exist, so to speak,” Wood said in an interview with the St. George News.

By designing the project this way, UDOT was able to reduce traffic interruptions to approximately nine hours, despite construction lasting more than a year, Wood said.

Crews applied dish soap to Teflon pads to keep “everything slippery and moving,” Wood said. As part of the hydraulics system, long “screws” rotated, causing the bridge to inch toward its final location. The slab was

only allowed to move several inches at a time, which varied as crews worked to ensure that spacing on each side was approximately equal.

“Dawn dish soap is the secret ingredient,” he said.

The project lasted 394 workdays and took an estimated 39,176 man-hours to complete, according to a fact sheet sent to Cedar City News by Lisa Hunt Beck, Harmony Public Involvement’s president and senior project manager.

However, Wood said that sliding the

The slab was only allowed to move several inches at a time, which varied as crews worked to ensure that spacing on each side was approximately equal.

bridge into place was the “easy part,” adding that upon completion, crews had to paint the white and yellow lines, hook up the guardrail and move the concrete barrier.

At the end of the process, there was, at most, a 3/100-in. difference between each corner of the structure, said Beck, adding that a difference of just 3/4 in. would have

been considered a failure.

Wood said that not only were backup plans put into place, but the engineers had “contingency plans for contingencies.”

Additionally, the bridge slid into position quicker than he anticipated.

(All photos courtesy of Utah Department of Transportation.) 

The entire accelerated bridge construction took approximately one year to complete, but the soap-enhanced portion was completed in four hours.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 9

#92948, 2017 BOMAG BW138AC-5, 1200 HOURS ..................................$39,500

#83458, 2018 KOMATSU PC240LC-11, 2,650 HOURS ................................$192,500

#93008, 2017 KOMATSU PC490LC-11, #3673, 2018 BOMAG BW161AD-5, 5100 HOURS..................................$227,500 530 HOURS......................................$89,500

#3604, 2015 BOMAG BW145DH-5, 776 HOURS......................................$54,500

#3543, 2011 BOMAG BW190AD-4HF, 2,750 HOURS ..................................$69,500

#3662, 2017 BOMAG BW190AD-5, #93158, 2012 KOMATSU PC360LC-10, 669 HOURS....................................$107,500 8860 HOURS....................................$87,500

#93134, 2014 JOHN DEERE 350G, 8303 HOURS....................................$79,500

#52386, 2019 KOMATSU PC170LC-11, 650 HOURS....................................$169,500

#83363, 2018 KOMATSU D65PX-18, #83432, 2019 KOMATSU PC240LC-11, 1600 HOURS..................................$275,000 COMBO HYDRAULICS, QC..................$CALL

#93125, 2012 KOMATSU PC490LC-10, 9290 HOURS..................................$104,500

#C000220BMG, 1996 CAT 615C II, 6,566 HOURS ..................................$79,500

#93143, 2020 KOMATSU D65EXI-18, #93162, 2017 KOMATSU WA500-8, 1700 HOURS..................................$327,500 5915 HOURS ......................................$CALL

Page 10 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 11

MADE FOR R

AMERICA A SERVICE THAT’S T

LOCAL SCHEDULE E A DEMO

TODAY

WITH A LOCAL DEALER R

sanyamerica.com m

Award Winning

SW405K

Page 12 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Cummins Promotes Jennifer Rumsey to President, CEO Cummins Inc. announced that effective Aug. 1, 2022, Tom Linebarger will end his term as chief executive officer (CEO) and Jennifer Rumsey, president and chief operating officer (COO), will assume the role of president and CEO. Rumsey will be the seventh CEO and first woman to lead the company since it was founded in 1919. Linebarger will continue to serve as chairman of the board of directors and in an executive chairman role, working directly with Rumsey on specific initiatives that position the company for continued success, including completing the pending acquisition of Meritor.

“Jen is a once in a generation talent and the right leader for Cummins at this important time in our history,” said Linebarger.

“She has been my partner in developing the Destination Zero strategy, which sets forth how the decarbonization of our industry will be a significant growth opportunity for Cummins. Her background as an engineer and technology expertise provides her a deep understanding of the major technical changes taking place and how to capitalize on them.

"Jen uniquely understands our customers and business, having worked in many different parts of the business during her more than 20-year career, and in every role, she has consistently delivered results. Most recently, she led our global operations as COO during one of the most challenging periods in our history, delivering record revenues and dramatically improving product quality and our market position while addressing unprecedented supply chain constraints," Linebarger said.

"Most importantly, Jen is a principled leader who cares deeply about our stakeholders. We share a common vision for Cummins, and I am confident that Jen will lead Cummins into an even more prosperous future.”

Tom Lynch, Cummins lead director, said, “On behalf of the Cummins board, I want to thank Tom for his three decades at the company, including the last 15 years where he served first in the COO role and then as CEO. His leadership has grown Cummins’ global business, positioned the company to lead in zero- and low-carbon solutions, and developed a highly capable and diverse management team to lead us through the technology transition.

"We look forward to his continued contributions as executive chairman. During our long-term strategic planning, the board had the opportunity to see Jen lead on key business initiatives and co-author the Destination Zero strategy with Tom. Jen is the ideal choice to lead Cummins into its next chapter, and we are confident that Jen will drive continued success for our business and customers.”

Since taking on the role of COO in March 2021, Rumsey has overseen Cummins’ global operations. In February 2022, she was elected to the Cummins board of directors, and she will maintain her seat on the board.

“I am honored and proud to be appointed the next CEO of Cummins and excited about what the future holds for the company,” said Rumsey.

“Growing up in Columbus, Indiana, where Cummins was founded, and spending most of my career here makes this announcement incredibly meaningful. I am grateful to Tom for his support and mentorship over the years and to the Board for their confidence in my leadership. My technical background, business experience and focus on people, purpose and impact have prepared me for this moment.

"At Cummins, we build solutions that serve our cus-

Jennifer Rumsey and Tom Linebarger

tomers’ needs and better our planet both now and in the future. At a time when technology is evolving more rapidly than at any point in our history, we must emphasize the critical role people play in our collective success. By putting people at the center of everything we do, we will power the path to decarbonization and advance our mission of powering a more prosperous world.”

Rumsey began her Cummins career working in Research and Technology, primarily focused on advancing technology to reduce criteria pollutants from diesel engines. Since then, she has held numerous positions of increasing responsibility and impact, including bringing new platforms and technologies to the market, driving improvements in product quality, and developing the capability of global teams. She also has been deeply engaged with some of the company’s most important original equipment manufacturer (OEM) partners.

The leadership roles Rumsey has held include president of components, where she oversaw a global portfolio of business units that delivered profitable growth while ensuring power solutions met performance and emissions goals, and chief technical officer, where she led strategic investments in key technologies and applications to transition to lower carbon emissions products, laying the foundation years ago for the company’s New Power Business and Destination Zero strategy. Prior to Cummins, Rumsey worked for a fuel cell technology company.

Rumsey is a member of the Society of Women Engineers, Society of Automotive Engineers, the Purdue Engineering Advisory Council and Women in Trucking Association. She holds a Bachelor of Science in Mechanical Engineering from Purdue University and a Master of Science in Mechanical Engineering from Massachusetts Institute of

Technology. Throughout her career, she has been an advocate for diversity, equity and inclusion and women in STEM fields.

For more information, visit cummins.com. 

Manitowoc Withdraws From ConExpo-Con/AGG 2023 Show The Manitowoc Company Inc. announced its withdrawal from the ConExpo-Con/AGG 2023 trade show.

“Over the last 18 months, Manitowoc has taken a multitude of actions to manage inflation. Due to the several price increases that we’ve passed on to our customers, we do not believe it’s appropriate to invest in a second, large tradeshow at this time,” said President and Chief Executive Officer Aaron Ravenscroft.

“We continue to invest heavily in new products and look forward to showing our latest developments at the upcoming bauma show in October 2022. As an alternative to ConExpo, we intend to host a Crane Days event at our Shady Grove, Pa., location at a later date.” 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 13

Page 14 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

PLA’s Order Affects Federal Projects Worth at Least $35M PLA from page 1

Professional organizations such as AGC and ABC have been vocal in their opposition to the concept. They believe some of the methods Biden plans to achieve his goals will actually limit access for women- and minority-owned businesses.

Unions maintain workers already have access to training as well as representation in negotiating benefits such as childcare through registered apprenticeships.

Melissa Wells of the North America’s Building Trades Unions (NABTU) believes industry needs to “get serious” about supporting groups who have traditionally been overlooked.

“Whether it’s historically marginalized communities, people of color, women or individuals that have been in contact with the justice system, we have to provide them support,” said Wells, head of diversity for the unions.

A Biden executive order seeks to impose project labor agreements (PLAs) on all federal construction projects worth at least $35 million as a means to do that.

Responding to an AGC survey, 73 percent of contractors are currently bidding on federal construction projects in that category.

Yet, the same number report they would not bid on those projects if a PLA were required.

“The use of a PLA can provide structure and stability to large construction projects,” said the White House. “PLAs also help ensure compliance with laws and regulations governing workplace safety and health, equal employment opportunity and labor and employment standards.”

AGC survey respondents see it differently.

“PLAs require every general contractor or subcontractor to negotiate with or become a party to an agreement with one or more union,” said the AGC. This mandate will make it harder for general contractors to subcontract with small, disadvantaged businesses, said 82 percent of firms surveyed.

“These groups typically are not accustomed or prepared to operate on a union basis,” the association maintains.

Seeking Labor Solutions The Trump administration wanted to raise the numbers in the talent pool, said former head of the DOL’s training division, according to a Bloomberg article. “We were trying to move away from the idea that you had to be a registered apprentice in order to get into an apprenticeship program,” said John Pallasch. “We just wanted to get more qualified people into the talent pipeline so that business and industry had the skilled labor that it needs.”

The Biden administration will focus on bolstering DOL’s 80-year-old registered apprenticeship programs, which has tougher standards for participants.

Building trades unions and the Biden administration thought the industry-led IRAPs programs would undercut their registered apprenticeships.

They believed workers could claim to be apprentices, but not have the full, complete safety and skills training or guaranteed wages provided by registered programs.

“The problem with IRAPs is no safety standards, no progressive wages,” said Tom Kriger, NABTU director of education and research. “It was kind of very loose and very illdefined.”

Industry-run programs typically only provide training for a specific skill, limiting a worker’s ability to find future jobs, he added.

A Biden administration executive order will impose project labor agreements on federal construction projects worth at least $35 million.

Registered apprenticeships shouldn’t be the only pathway for job training, said the ABC. The registered system can be overly competitive, making it difficult for workers with other responsibilities to prepare for the testing required to qualify. And it can have too many requirements to attract businesses to participate, according to Greg Sizemore, ABC vice president of health, safety, environment and workforce development.

The organization found that fewer than 25,000 workers completed construction job training under DOL’s multi-year registered apprenticeship programs in fiscal 2021.

“Clearly, the government-registered apprenticeship system is not meeting the industry’s need for skilled labor,” said Ben Brubec, ABC vice president of regulatory, labor and state affairs.

The system “cannot be the only solution supported by government to meet industry demands and build a diverse workforce,” he added.

PLAs guarantee a contractor will enter into collective bargaining agreements with at least one union covering the duration of the project.

Biden’s February executive order directed federal agencies to use such agreements on construction projects above $35 million.

Unions and Democrats hold up PLAs as a way to negotiate well-paying jobs and secure benefits to support workers who are underrepresented in the trades, like women.

“There’s PLAs that have language around helping support, and fund childcare,” NABTU’s Wells said. “I think there’s more room for growth using that pathway.”

But industry groups and Republicans say that PLAs favor unions and make it difficult for smaller, local and minorityowned businesses that don’t have strong ties to unions or are unable to meet the requirements outlined in the agreement.

“And by the time they do, the truth of the matter is, the project will be left with somebody else,” ABC’s Sizemore said. “Would a government-mandated PLA result in a decrease in hiring of minority and women owned businesses, veteran owned businesses? We’re saying absolutely, it would.”

Reasons to Doubt The Department of Labor announced a summer-long “Talent Pipeline Challenge” calling on employers and local governments to work with organizations that offer job training, like unions and seek out women and workers of color.

The DOL also is rescinding the Trump administration’s

Industry-Recognized Apprenticeship Program or IRAP. The program allowed companies to create their own training programs that could be monitored by third parties, The Trump DOL believed this would expand apprenticeships in under-represented fields not a part of the DOL’s traditional registered apprenticeship model.

The construction industry believes rolling back a Trump administration industry-based training model will tilt funding in favor of labor organizations and exclude a large share of the trades workforce that isn’t unionized.

Only 12.6 percent of construction workers were union members in 2021, BLS data shows.

“There’s a large push by the administration and it’s very clear that they want to grow the union workforce,” said Sizemore. “The vast majority of Americans working in the construction industry say, ‘I choose to work in a merit shop environment that allows me to get paid based upon what I know or the value that I bring to the industry, as opposed to what somebody has negotiated for me in a contract.’”

Nearly three-quarters of federal contractors said they will stop bidding on federal projects if the Biden administration were to impose PLAs. The AGC’s survey also indicated the federal mandate will make it harder for contractors to partner with small, veteran, minority or disabled-owned firms.

The survey found that in addition to limiting competition for federal projects, imposing PLAs will challenge firms to find enough workers to hire.

Nearly 40 percent of the survey respondents operate under a collective bargaining agreement, and 83 percent said there are not enough union workers to guarantee completion of the project on time and on budget.

Among firms that have worked on a project that involved a government-mandated PLA, 67 percent said the agreement made it harder to find workers.

“Having fewer firms competing for federal projects undermines the president’s claim that his executive order will make federal construction more efficient and cost-effective,” said Stephen E. Sandherr, CEO of the AGC. “Worse, these PLAs will hurt minority, disadvantaged and veteranowned businesses at a time when many of them are still recovering from the economic impacts of the pandemic.”

Association officials are urging the Biden administration to abandon imposition of PLAs on most federal construction projects.

They are sharing details from the survey with the administration as they outline details for how the president’s executive order will limit competition, impede efficiency in federal procurement, and harm disadvantaged business enterprises.

“This executive order will turn Build Back Better into build back fewer: fewer firms, hiring fewer people to build fewer projects,” Sandherr added.

Ultimately, Biden wants to see his promise for an equitable recovery, while repairing infrastructure, delivered.

Industry wants that as well, but the two sides disagree on how to get there.

“Hardworking taxpayers deserve efficient and effective policies that will encourage all qualified contractors to compete to build long-lasting, quality projects at the best price,” said ABC. “Government-mandated project labor agreements discourage quality contractors and the more than 87 percent of U.S. construction workers who choose to not join a union from bidding and working on projects in their own communities.”  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 15

ABC: Govt-Registered Apprenticeship Plan Won’t Meet Demand It would take 14 years for federal and state governmentregistered apprenticeship programs to educate the 650,000 workers the construction industry needs to hire just in 2022, according to an Associated Builders and Contractors analysis of U.S. Department of Labor data from 2021.

DOL data indicate that the construction industry’s federal government-registered apprenticeship system produced just 24,822 completers of its four-to-five-year apprenticeship programs, and in addition, construction industry apprenticeship programs registered with state governments produced an estimated 15,000 to 20,000 completers in FY 2021.

“Clearly, the government-registered apprenticeship system is not meeting the industry’s need for skilled labor and cannot be the only solution supported by government to meet

“...the government-registered apprenticeship system is not meeting the industry’s need for skilled labor...”

Ben Brubeck

Associated Builders and Contractors

industry demands and build a diverse workforce,” said Ben Brubeck, ABC vice president of regulatory, labor and state affairs. “This is why lawmakers should support inclusive, allof-the-above solutions to workforce development as part of their efforts to attract and retain a diverse construction industry workforce, especially during these economically challenging times.

“The construction industry currently faces supply chain disruptions, unprecedented materials prices that are 44 percent higher than they were before the COVID-19 pandemic and declining investment in nonresidential structures,” said Brubeck.

“Because 87.4 percent of the construction industry does not belong to a union, government-registered apprenticeship program participation requirements for taxpayer-funded infrastructure projects are not a holistic solution to the skilled labor shortage, which is exacerbating historic levels of inflation in the construction industry and undermining significant taxpayer investments in infrastructure.

“Government-registered apprenticeship programs are only a key part of an all-of-the-above solution to workforce development,” said Brubeck.

“ABC’s 68 chapters are educating craft, safety and management professionals using innovative and flexible learning models like just-in-time task training, competency-based progression and work-based learning in addition to more than 300 federal and state GRAPs across 20 different occupations in order to develop a safe, skilled and productive workforce. In addition, ABC member companies administer hundreds of GRAPs independent of ABC’s network and invested an estimated $1.6 billion in construction workforce development in 2021.”

For more information, visit workforce.abc.org. 

More possibilities for your excavator, and a better result A tiltrotator creates oppor tunities for you to do more with your excavator with fewer position changes. It can transform your excavator into a flexible do-it-all tool carrier - making it possible for you to take on more types of tasks while improving your safety, productivity and end result. rototilt.com/tiltrot o ators

rototilt.com

Rototilt® tiltrotators • R1 | 1.5-3.5 tonnes • R2 | 3-6.5 tonnes • R3 | 6-12 tonnes • R4 | 10-16 tonnes

• R5 | 14-19 tonnes • R6 | 15-24 tonnes • R8 | 23-32 tonnes

Page 16 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 17

CGA Names New Veep of Its Damage Prevention Institute Common Ground Alliance (CGA), the national nonprofit trade association dedicated to protecting underground utility lines, people who dig near them and their communities, announced that Sam Hall will join the organization as the vice president of the Damage Prevention Institute (DPI).

The newly created DPI will take the industry to the next level by utilizing data and statistics to generate powerful insights and efficiencies that will reduce the rate of damages to buried infrastructure. In April, CGA announced that the Gold Shovel Association would become a new arm of CGA, the Damage Prevention Institute.

Hall brings more than two decades of industry experience and a strong regulatory background to his new position as vice president, where he will lead the DPI’s development of stakeholder metrics to drive efficiencies in the damage prevention system. In this role, Hall also will collaborate with industry leaders and key CGA committees to create a peer-reviewed accreditation process.

Prior to joining CGA, Hall served as senior program manager of the U.S. Department of Transportation, Pipeline and Hazardous Materials Safety Administration (PHMSA)

for more than 15 years, actively engaging with damage prevention stakeholders from the local level to internationally.

Hall additionally brings years of experience with data management and analytics in the private sector, as well as in local and federal government, including the development and implementation of metrics and evaluation mechanisms for grant programs, public awareness programs, emergency management systems and state excavation damage prevention law enforcement programs.

“We are thrilled to welcome Sam to the CGA team where he will bring his industry expertise and experience to the Damage Prevention Institute,” said Sarah Magruder Lyle, president and CEO of Common Ground Alliance.

“Sam’s experience at PHMSA, decades of data management, and strong relationships with key stakeholders will give him the tools to successfully lead the DPI and the development of its key elements, such as the peer review process.”

For more information about CGA and the DPI, visit www.CommonGroundAlliance.com and www.DamagePreventionInstitute.com. 

heavy equipment

Armor PROTECTION YOU CAN COUNT ON!

Call Now 208-304-0002 Visit us @ Hearmor.com

Heavy Equipment Armor is the FIRST and ONLY company dedicated to building ballistic window/ door, top guard, and cab guard products for heavy equipment. Whether your machine is moving dirt with a bucket, lifting materials on the job site, masticating, demolition, or doing a specialized job with an attachment; You can count on HEA ballistic window and cab guards protecting your assets! Our enhanced guarding will be there to help protect the operator and the heavy equipment.

Our products fit Bobcat, Caterpillar, Kubota, and Komatsu excavators and skid steers.

TOP PRODUCTS

Ballistic Defender Door or Window for Excavators or Skid Steers Bolt on Steel Window Screen for Excavators

Defender Ballistic Door for Skid Steers

Bolt-on Steel Screen Mesh Window for Excavator

Bolt on Skeleton Front Door for Skid Steers Enhanced Guarding for both Excavator and Skid Steer

Skeleton Front Door for Skid Steers

Defender Ballistic Window for Excavators

Being safe while in the woods is our core belief at Heavy Equipment Armor. Countless hours working on different job situations have taught us that accidents can occur at any given time! That’s why Heavy Equipment Armor decided to create something that could protect operators and large equipment. At Heavy Equipment Armor, we have made it our job to safeguard operators in all working environments. Whether you are operating a bucket, hammer, auger, mulcher, or a log processor you can feel safe with our excavator forestry guarding. Our forestry guarding for excavators helps protect you and your equipment from flying debris at your job site! Our guarding equipment can be used for more than forestry, anytime any excavator is being used guarding should be used.

Sales@hearmor.com 50287 N OLD HWY 95, RATHDRUM, ID 83858

Page 18 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 19

NPT1200 Niece Water Towers deliver reliability and durability when you need fast mobile water service. With a 12” discharge tube it fills your tanks at a rate of over 1,000 gallons per minute. Offers removable power pack for security, fifth wheel tow hitch, professionally engineered and constructed.

It features (8) legs for stability .

5th wheel set up for quick “tow and go.”

FUEL AND LUBE TRUCKS

OFF ROAD WATER TRUCKS OVER THE ROAD WATER TRUCKS

FUELER TRUCKS

Page 20 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

www.trophytractor.com Agricultural Tractors

Crawler Loaders

2015 JOHN DEERE 6215R......................$139,500 (4) 2018/19 JOHN DEERE 6120M ......From $79,500 2018 JOHN DEERE 5125R ......................$98,500 (2) 2017 JOHN DEERE 5085M ..........From $59,500

(4) 2017/19/20 CATERPILLAR 963K ..From $265,000 2015 CATERPILLAR 994H ............From $2,300,000

2018 CATERPILLAR 320........................$179,500 2017 CATERPILLAR 316FL ....................$169,500 2013 CATERPILLAR 6030..........................$CALL

Dozers - Crawler

Motor Graders

(4) 2018 CATERPILLAR D8T............From $510,000 (2) 2020 CATERPILLAR D6 ........................$CALL 2020 CATERPILLAR D6 XL ....................$425,000 (8) 2019-22 CATERPILLAR D6 LGP ..From $425,000 (3) 2014/18/19 CATERPILLAR D6T XW .................. ..............................................From $295,000 2018 CATERPILLAR D6N XL ......................$CALL 2018 CATERPILLAR D6K 2XL..................$185,000 2012 CATERPILLAR D6K XL ......................$CALL

2020 CATERPILLAR 150AWD..................$407,500 (2) 2017-19 CATERPILLAR 140M3 ..............$CALL 2008/16/17 CATERPILLAR 14M VHP ..From $420,000

Artic Trucks (2) (2) (4) (2)

2016 CATERPILLAR 745C ............$339,500 Ea. 2019 CATERPILLAR 745 ..............$449,500 Ea. 2016-2019 CATERPILLAR 725C2 ..From $259,500 2014/15 CATERPILLAR 725C ......From $195,000

Compactors - Padfoot/Smooth Drum 2020 CATERPILLAR 815K..........................$CALL 2007 CATERPILLAR 815F 2 ......................$CALL (4) 2013-17 CATERPILLAR CS66B ....From $129,500 (8) 2015-22 CATERPILLAR CP56B ....From $129,500 (7) 2017-20 CATERPILLAR CS56B ....From $139,500 (2) 2014/17 DYNAPAC CT3000....................$CALL (2) 2013/21 HAMM H13I..................From $87,500

Crawler Carriers 2019 MOROOKA MST4000VD ................$289,500 (2) 2018 MOROOKA MST3000VD......From $219,500 (3) 2018/19 MOROOKA MST2200VD ..From $172,500 MOROOKA MST660VD ..........................$89,500

Dozers - Wheel 2015 CATERPILLAR 834K ......................$285,000

Excavators - Crawlers (2) 2015/19 CATERPILLAR 374FL ....From $395,000 (4) 2019 CATERPILLAR 390FL ....................$CALL 2017 CATERPILLAR 349FL ....................$329,500 2019 CATERPILLAR 349FL ........................$CALL (2) 2021/22 CATERPILLAR 349 ..................$CALL (3) 2019 CATERPILLAR 336 ............From $279,500 (2) 2017-18 CATERPILLAR 336FL ....From $219,500 2015 CATERPILLAR 323FL ....................$132,500

Rigid Frame Trucks (9) 2007-2009 CATERPILLAR 777F ..............$CALL

Skid Steers - Track (8) 2020-21 JOHN DEERE 333G ..................$CALL (2) 2020 CATERPILLAR 299D3 XPS..............$CALL (2) 2021 CATERPILLAR 299D3....................$CALL

Water Equipment - Tower/Tanks

Winch PACCAR PA110VS245 ............................$7,500

Water Equipment - Trucks 2013 CATERPILLAR 740B ..........................$329,500 (2) 2014/15 CATERPILLAR 725C ..........From $269,500 (2) 2017/18 CATERPILLAR 725C2 ........From $309,500 2021 CATERPILLAR 725............................$550,000 2022 CATERPILLAR 740 GC ..........................$CALL 2019 FORD F750 ......................................$95,000 (2) 2007/15 FREIGHTLINER M2 ............From $49,500 (19) 2018-21 KENWORTH T370 ........From $89,500 (2) 2022 INTERNATIONAL HV607 ................$CALL (3) 2022 INTERNATIONAL MV607 ....From $115,000 (19) 2018-22 PETERBILT 348 ..........From $149,500 VOLVO A25D ....................................$109,500

Miscelleneous Equipment

2022 ROME AG-12................................$11,500 (5) 2020-22 Klein KPT-120 Water Towers ..............

(3) 2018/22 ROME TRCW12 ............From $48,500 ..............................................From $62,500 2019 ROME TACW16 ............................$36,000 2018 ROME TCW28 ..............................$19,750 2018 ROME TCW32 ..............................$23,000 1991 CATERPILLAR 992C..........................$CALL Authorized dealer for 2019 CATERPILLAR 966M ..............From $329,500 2020 CATERPILLAR 950M ....................$359,000 (2) 2018 CATERPILLAR 938M..........From $179,500

Wheel Loaders

Biz Establishes Digital Storefronts With Local Suppliers Soil Connect is rolling out a QuickStart program to partner with local construction materials suppliers across the United States — including quarries, recycling facilities, landscape suppliers, asphalt and cement plants, and sand and gravel locations.

Soil Connect’s QuickStart program creates digital storefronts for local material suppliers to sell their materials directly to the platform’s growing user base of construction professionals. Soil Connect also has secured fresh funding led by new investors Stellifi VC and GS Futures. Both firms launched their venture capital units in the last 12 months, and both were born out of traditional real estate and construction firms.

GS Futures is an early-stage corporate venture arm of GS Group, a leading Korean conglomerate with operations in the Energy, Constructions and Retail, looking for investment and business development opportunities in climate, energy transition, construction and retail innovations. Stellifi was formed by the partners of OTH Capital, an Austin-based Real Estate Private Equity & Development firm.

The QuickStart program supports Soil

Connect’s broader market expansion plans by more rapidly driving listings of available materials for construction professionals at the local level, while providing suppliers access to a self-serve suite of tools to more effectively market and sell their product.

As part of the program, Soil Connect builds a company profile for local businesses to “claim” and take ownership of. The material supplier can then adjust the types and quantities of material that the business wants to market as part of their digital storefront on the Soil Connect marketplace.

Soil Connect will initially launch the program in Indianapolis on July 27 before rapidly rolling it out to markets across the United States.

Cliff Fetner, founder and CEO of Soil Connect, said, “We are pleased to launch this new QuickStart program and welcome Stellifi VC and GS Futures as investors to further accelerate the growth of our platform.

“As longtime construction professionals, we founded Soil Connect to address many of the frustrations we had experienced in trading and transporting soil, aggregates

and other construction materials — and our reputation has preceded us in markets across the country as our colleagues have proactively joined and started transacting on our platform. However, as we’ve scaled, we’ve recognized that there is an untapped opportunity to create value for local materials suppliers as well.”

Jonathan Alvarado, chief growth officer of Soil Connect, said, “These sellers reflect the industry in that many still operate on analog systems and for the most part do not have the capability or budget to develop and manage an online store. In claiming their digital Soil Connect storefronts, suppliers gain immediate, hassle-free access to our rapidly growing community of construction professionals and a more efficient way to move product, while providing added supply liquidity to our platform to drive increased transaction volume — it’s truly a win-win for all stakeholders.”

Paolo Boero, managing partner of Stellifi VC said, “We are honored to join such a highly respected and well-rounded mix of leading venture capital firms and construction strategics who have invested

in Soil Connect. The incredibly inefficient way that construction professionals transact and track the transportation of dirt and aggregates between job sites is a serious problem that has plagued the industry since its inception. In a short timeframe, Soil Connect has already established a solutions-orientated platform with a market-leading position that has changed the landscape for the better.

We are big believers in what the team is doing, and look forward to using our relationships to help expand the platform.”

In addition to its QuickStart program, Soil Connect continues to invest in and enhance its technology to advance its mission to be a full-stack, end-to-end solution for the construction industry. Most recently, the platform built a new tech stack to support its marketplace, allowing Soil Connect to introduce new services and features to its community. This will include, among other things, the ability to triangulate and secure transport for materials within the app, as well as enhancing The Daily Dig job site monitoring service.

For more information, visit www.soilconnect.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 21

10’ Commercial Pavers

8’ Commercial Pavers

Page 22 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Manitowic 18000 Crane, 5 Ft. High, 1:50 scale $1,500 Bucyrus Erie 22-B Dragline, 1:50 scale - $290

Bucyrus Erie 22-B Cable Shovel, 1:50 scale - $225

Bucyrus Erie 22-B Cable Backhoe, 1:50 scale - $225

Caterpillar D4, 2T Crawler w/Letourneau Push Blade & Hyster Winch, 1:16 scale - $225

Link Belt 490x4 Excavator, 1:50 scale - $225

Grove GMK3050 All Terrain Crane, 1:50 scale - $175

Roadtec RX-700 Cold Planner, 1:50 scale - $175

International TD-24 Crawler w/Cable Blade, 1:25 scale - $175

Bantam Lattice Crane 0n White WC22 Carrier, 1:50 scale - $160

Allis Chalmers TS300 Cable Operated Motor Scraper, 1:50 scale - $110

Allis Chalmers Forty-Five Motor Grader, 1:50 scale - $110

Kobelco SK140Rlc-7 Compact Excavator, 1:50 scale - $160

Roadtec RP190 Paver, 1:50 scale - $100

Link Belt 210X4 Excavtor, 1:50 scale - $150

Terex 2366 Articulated Dump Truck, 1:50 scale - $140

Shipping and Handling Included

Bmckeon Collectibles 470 Maryland Drive Fort Washington, PA 19034

WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Paving

SECTION

Pages 23-37

For more information on paving, compaction and milling equipment, as well as comparison charts, visit CEG's Web site at www.constructionequipmentguide.com.

Hamm: Offering Sustainable Solutions at Every Level A year after receiving environmental certification according to ISO 14001, it is clear that Hamm AG, based in Tirschenreuth, Germany, is in a good position in terms of environmental protection.

For many years now, the company has handled finite resources responsibly due to modern production processes and sustainable solutions in the areas of service and spare part supply. This philosophy also is reflected in the current product range.

Highest Environmental Standards For many years, compaction specialist Hamm has been actively promoting environmental protection through sustainable solutions, and is continuously reducing its carbon footprint. Achieving the ISO 14001 environmental certification at the end of 2020 marked a milestone.

Stefan Klumpp, member of the executive board of HAMM AG, describes the company’s motivation: “Protecting the environment is vital for us. This applies not only to our operations as a manufacturing company, but also to our products. It goes without saying that we therefore comply with the statutory regulations.

“Through our environmental management system, we have also identified further potential for improvement that will enable us to reduce our consumption of resources and energy.”

One of the flagship projects to date is the construction of a geothermal system. It has been heating and cooling the administration building since 2013, yielding savings of around 86 t of CO2 per year.

At the plant in Tirschenreuth, the energy demand for lighting was almost halved in 2019 by switching to LED lights.

This also saves over 80 t of carbon dioxide every year.

Optimizations in the compressed air cycle also reduce the electricity/energy demand by 50,000 kWh. That corresponds to close to 5 t of CO2.

All Divisions Under Magnifying Glass Since 2018, an environmental protection manager has been advancing the further minimization of raw material and energy consumption, waste, packaging and emissions of solvents (VOCs) and placing all divisions under the magnifying glass. In this way, Hamm is improving its ecological footprint through large-scale measures as well as numerous finely detailed projects.

At the moment, the energy demand for heating also is being drastically reduced, as well as the consumption of fresh water in production. There also are very high standards regarding waste water and low noise emissions from the plant. Alongside this, paperless production is to be introduced in the near future.

For many years, Hamm has handled finite resources responsibly across all areas of the company.

Recycling, Recuperation Waste is also a key focus.

“By implementing numerous individual measures, by 2023 we will have reduced the waste per produced machine by approximately 20 percent compared with 2019,” said Plant Manager Dirk Pressgott.

In production, an innovative painting process reduces the amount of paints and solvents used while offering the same paint quality. Hamm also recycles the solvents used for cleaning the painting systems.

Internal logistics also saves energy by optimizing routes and also uses quiet electric forklift trucks. Shortly before the rollers leave the plant, the brake energy is recovered via recuperation at the test bench, which all machines pass.

The role of digital systems and tools in Production and Logistics is constantly increasing at Hamm. The consequence is that paperless working will soon be a reality in these divisions.

Intelligent Solutions Instead of Materials In general, “intelligent solutions instead of materials” applies in purchasing and logistics at Hamm. Special transport racks therefore render much of the packaging superfluous. And, due to a 4PL strategy, there are virtually no empty runs when supplying purchased parts and semi-finished products. In addition to these measures, suppliers are selected based on their environmental certification and training of employees with a view to environmental protection.

Through dialog with the design and production departments, Hamm also has been continuously reducing excess packaging and optimizing transport capacity for many years. see HAMM page 30

Page 24 • July 31, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Dynapac Introduces New Highway Class Paver Range Dynapac’s newest range of highway class pavers and screeds built specifically for the North American Market includes four models of tractors, D30T – 10 ft. track; D30W – 10 ft. wheel; D25T – 8 ft. track; D25W – 8 ft. wheel; and two models of screeds Mat Master 16R (8 to 16 ft. screed); and Mat Master 20R (10 to 20 ft.).

Your Success Our Key Focus Dynapac caters to its customers success across all continents with specific product and application solutions focused on their needs, according to the manufacturer.

The North American pavers are designed with six core common principles to bring success in every aspect.

• Job Site Confidence • Low cost of ownership • High Quality Results • Maximum Uptime • High Productivity • Environment/Sustainability Simply Smart Paving From interstate highways, county roads to large commercial job sites, Dynapac’s latest generation of highway class pavers offer optimal solutions to high quality paving. High performance tractor design with focus on simplified smart paving technique, maximum uptime combined with award winning Mat Master Screeds offer high paving quality results.

Fast, Efficient Paving for Thick or Thin Layers The new generation of highway class pavers are optimal to provide high paving speeds for thin or thick layers. The track and wheel pavers are designed with maximum productivity and uptime for the customers.

High transportation speeds, up to 10 mph, allows fast repositioning of the machine at the start or end of the day. iTrack ultra duty rubber track design offers reliable performance with enhanced wear life offering low maintenance costs.

Innovative Dynamic suspension control (DSC) on the wheel pavers offer enhanced tractive effort and highquality results needed for highway paving with lower investment and maintenance costs, according to the manufacturer.

For thin overlays on highways, the Mat Master screeds are equipped with DiveStop and Active Screed Assist technique delivering high paving quality results regardless of material types. A double width (10 to 20 ft. or 8 to 16 ft.) heavy duty screed design is highly suitable for paving highway, new construction or large commercial job sites with less number of passes.

Keep Things Simple, Smart The new pavers are built with dual independent tractor consoles for flexible working positions for the operator.

The Dynapac smart dashboard and HMI design on the tractor and screed allows the operator to be focused on the paving job during long paving hours, improving efficiency and productivity. The Dynapac PaveManager makes the paving process itself simpler and smarter.

There are several operators assist functions such as FeedAssist, CleanAssist, ImpactAssist, DiveStop, LightAssist built-in so that the paving crew can maximize the paving time and focus on the job at hand.

Pave With Confidence The user-friendly swing out dashboards are equipped with toggle and rocker switches within easy reach, making for an ergonomic and relaxed working day. The smart arrangement of switches combined with easy feel reduces the time to learn significantly. The learning time needed on Dynapac pavers is further reduced by making it a simplified operating concept.

Multiple choice of feed systems are customizable to the operator’s preference. With new Dynapac highway paver range, operators can choose to pave the way they always paved without adding a learning curve. The feed system is designed to provide multiple options depending on the crew’s preference and paving scenarios.

• Proportional Dual Sensor Mode — auger speed is controlled by ultrasonic sensors and conveyor follows the auger speed • Proportional Quad Sensor Mode — auger and conveyor work independently with their own sensors • Flow Gate — optional flow gate for controlling the head of material Maximize Paving Time, Reduced Set Up/Cleaning Time • Set the paver quick to pave. Dynapac Clean assist and Fill Assist system helps to get started early and start paving. With smart options like Hydraulic Tunnel extensions, the auto lube system reduces daily maintenance time and allows for more productive paving time.

• Fast Machine Clean up time. Easy cleaning with the integrated emulsion spray equipment with tank and hose reel and a dedicated cleaning assist mode for conveyor, auger and screed. With the smallest front conveyor cover (<10 in.) in the market the cleaning of hopper has never been this easy.

• Heat up the screed fast and efficient. Get ready to pave with shorter heating-up times. Dynapac heat control box is a multi-zone heat control with fail-safe heating design. This keeps the screed heated at the right time at the right temperature. When working with different materials operators always have the choice of selecting the right temperature needed for job. The heat control system is designed to provide nonstop fail-safe heating to screed. With two heating modes — Heat Boost and Eco Mode’ — the preferred heating method is always at your fingertip. The Heat Boost mode heats the screed fast to get you going during the cold mornings. The ECO mode keeps the heat uniform across the screed saving fuel.

Proven Reliability The key components of this machine have been proven in the field for many decades. The powertrain, strong steel structures combined with ultra-heavy-duty ground engaging and wear parts design makes the paver highly reliable, according to the manufacturer.

The Dynapac Mat Master screed with stable design never lets you down in achieving your productivity and quality. iTrack — The strong Dynapac iTrack system offers longer track life combined with smart detract system ensures continuous and trouble-free operation.

Unique Track system design with box frame design reduces the cost of upkeep and maintenance significantly.

Perfect Mat Quality — Pave Relaxed Mat Master screeds avoid bending or torsion with unique double extension system, which will have a direct quality output of the paved mat. High pre-compaction is achieved with the heavy weight screed design.

• Dynapac fail-safe multizone heat control system ensures perfect quality mat with consistent heat distribution throughout the complete working width for screed plates and end-gates.

• Precise Screed adjustment with Anti Drift Technology: Screed functions are activated by positive lock thread mechanism avoiding the need of constant screed adjustment while paving.

• Avoid Bump/Marks in the Mat with Smart Solutions: Avoid bumps and marks in the paved mat with the hydraulic Safe Impact System and the Dynapac DiveStop technology.

• Even and Smooth Mat: Dynapac DiveStop combined with Active Screed Assist technology easily handles tricky mixes and thin layer paving.

• The Dynamic Suspension Control (DSC) is next level technology in providing traction to wheel pavers.

When the wheels are working on soft and/or uneven surfaces there is always ground contact for drive wheels with no spinning. This maximizes the traction and avoids uneven screed movement while running over objects creating perfect mat quality.

• Anti Segregation Auger system offers is the largest diameter (17-in.) and slimmest drive chain box providing homogeneous mix Reduce Total Cost of Operation, Maximize Uptime One of the key drivers with new highway class paver design is to reduce customers total cost of operation. The main wear parts on the new range of pavers such as push rollers, conveyor and auger wear parts designed to extend the wear part life. Unique U-shape screed plate designed for longer usable life.

Enhanced ground engaging parts life is achieved by the super duty design of tracks and wheels system offering long intervals between rebuild, saving time and money. The iTRack track tensioning system keeps optimal track tension in forward and reverse. Losing track tension is near impossible with our intelligent track tension sensing system, while working on gravels and soft materials, the intelligent track tension sensing system alerts and stops the paver if inadequate tension to the tracks.

Night paving is made easy with a Flicker-free Generator system design that allows to directly connect the night-lights to the paver quick and easy. The need of renting external generators and plugs are removed.

Environment, Sustainability Care Dynapac highway class pavers are equipped with ECO-Mode engine technology for lower fuel consumption and smart design allows to operate the paver at lowest possible engine RPM. Screed heating also is possible with either ECO Zonal heating consuming less power and fuel saving money for customers. Mat Master screeds are designed to handle variety of mixes like polymer modified, rubberized asphalt, WMA and SMA etc.

For more information, visit www.dynapac.us. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 31, 2022 • Page 25

BUILT TO CONNECT

High Performance, Quality A Workhorse To Depend On Results.

The Carlson CP100 IICP100 sets the standard for versatility, component lifecycle II sets the standard for versatility, component and mat quality.

With a powerful 100 horsepower engine, an lifecycle and mat quality. With a powerful 100hp engine, an array array of configurations and the class-leading Carlson EZCSS of configurations and the class-leading EZCSS single slide screed, single slide screed, it’s easy to see why the CP100 II is the ideal it’s time to see why the CP100 II has fast become the contractor’s choice for heavy-duty commercial paving. choice for heavy-duty commercial paver platforms.

astecindustries.com www.cooperequip.com 5210 N Loop 1604 E San Antonio, TX 78247 (210) 657-5151 201 Commerce City Blvd.

Georgetown, TX 78626 (512) 930-5151

www.goodfellowcorp.com

www.modernmachinery.com

390 North 200 West Lindon, UT 84042 (801) 796-6126

Kent, WA Billings, MT (800) 669-2425 (800) 735-2589

12451 Old U.S. 95 Boulder City, NV 89005 (702) 293-7504

Rochester, WA Kalispell, MT (800) 304-4421 (800) 434-4190 Spokane, WA Missoula, MT (800) 541-0754 (800) 332-1617 Eugene, OR Boise, ID (800) 221-5211 (800) 826-9811 Pocatello, ID Portland, OR (800) 829-4450 (800) 950-7779

www.herrmannequipment.com

www.closner.com

Northern California 9220 Viking Place Roseville, CA 95747 (916) 783-9333

6532 East Highway 114 Rhome, TX 76078 (817) 708-9108

Southern California 2711 Lilac Ave. Bloomington, CA 92316 (909) 877-5597

21910 FM 2252 Schertz, TX 78154 (210) 732-2131 13800 FM 973 N Manor, TX 78653 (512) 272-8200 Coming Soon Houston, TX

Page 26 • July 31, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Arnold Machinery Company www.arnoldmachinery.com 2975 West 2100 South Twin Falls, ID Salt Lake City, UT 208-733-1715 801-972-4000 Elko, NV Idaho Falls, ID 801-972-4000 208-523-0822 Sparks, NV Meridian, ID 775-356-1511 208-887-6000

Las Vegas, NV 702-642-9000

Pacwest Machinery www.pacwestmachinery.com Kent, WA Eugene, OR 206-762-5933 541-302-3762

Phoenix, AZ 602-414-1900

Mount Vernon, WA 360-588-3083

Spokane Valley, WA 509-534-5933

Tucson, AZ 520-294-7677

Portland, OR 503-252-5933

Pasco, WA 509-547-5933

Sierra Machinery www.sierraelpaso.com 939 Hawkins Blvd.

El Paso, TX 79915 915-772-0613 7179 Roswell Hwy. Artesia, NM 88210 575-746-6592

Volvo Construction Equipment & Services www.vcesvolvo.com Bakersfield, CA 661-387-6090

Sacramento, CA 916-504-2300

San Leandro, CA 510-357-9131

Corona, CA 951-277-7620

Lakeside, CA 619-441-3690

Turlock, CA 209-410-6710

Fresno, CA 559-834-4420

Redding, CA 279-201-4869

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 31, 2022 • Page 27

ARNOLD MACHINERY COMPANY www.arnoldmachinery.com Las Vegas, NV 702/642-9000 Phoenix, AZ 602/414-1900 Tucson, AZ 520/294-7677

ASCO EQUIPMENT www.ascoeq.com Beaumont, TX 409/212-8100 Brenham, TX 979/836.6641 (North) Houston, TX 281/987.1990 (South) Houston, TX 713/649.0940

BEE EQUIPMENT SALES, LTD www.beeequipmentsales.com Lubbock TX 806/745-1511 866/796-3211

KIRBY-SMITH MACHINERY, INC. www.kirby-smith.com Oklahoma City, OK 800/375-3339 McAlester, OK 918/310-1550 Tulsa, OK 800/375-3733 Kansas City, KS 877/851-5729

ROMCO EQUIPMENT CO. www.romco.com Austin, TX 512/388-2529 877/851-1026 Buffalo, TX 903/322-5602 Dallas (Carrollton), TX 214/819-4100 800/227-6626 Ft. Worth, TX 817/626-2288 866/966-4602

Longview, TX 903/758-5576 Midland, TX 432/234-9409 San Antonio, TX 210/648-4600 800/966-4601

Page 28 • July 31, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

The work may be under your feet, but you’re looking ahead - to the next challenge and the next deadline. Your local Cat Dealer

Built to Exceed the Demands of the Commercial Paving Contractor

WE’RE RIGHT THERE WITH YOU Cashman Equipment

Holt of California holtca.com

quinncompany.com

Serving Nevada & the Eastern Sierras 888-CASHMAN (888-227-4626) Henderson/Las Vegas, NV Elko, NV Reno/Sparks, NV Round Mountain, NV Winnemucca, NV

7310 Pacific Avenue Pleasant Grove, CA 95668 916-921-8800 1521 West Charter Way Stockton, CA 95206 209-466-6000 3440 East Pacheco Blvd.

Los Banos, CA 93635 209-826-4919

Bakersfield, CA 661-393-5800 Foothill Ranch, CA 949-768-1777 Fresno, CA 559-896-4040 Los Angeles, CA 562-463-4000 Riverside, CA 951-686-4560

cashmanequipment.com

Quinn CAT

N C Machinery ncmachinery.com

Tukwila, WA 425-251-5800 Chehalis, WA 360-748-8845 Fife, WA 253-896-0878 Monroe, WA 360-805-6000 Mount Vernon, WA 360-424-4292 Port Angeles, WA 360-452-9222

East Wenatchee, WA 509-886-5561 Yakima, WA 509-248-2371 Anchorage, AK 907-786-7500 Fairbanks, AK 907-452-7251 Juneau, AK 907-789-0181 Wasilla, AK 907-352-3400

Tractor & Equipment tractorandequipment.com Billings, MT 406-656-0202 Bozeman, MT 406-585-5800 Great Falls, MT 406-761-7900 Helena, MT 406-442-2990 Williston, ND 701-713-2100 Worland, WY 307-347-4747

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 31, 2022 • Page 29

Roads must be built.

Worlds must be connected.

DOUBLE DRUM OSCILLATION & HIGH FREQUENCY

DURABLE EASY TO USE

POWER MOTIVE CORP.

NATIONAL EQUIPMENT DEALERS

JET CITY EQUIPMENT

CISCO EQUIPMENT

WESTRAX MACHINERY

www.powermotivecorp.com

www.nedealers.com

www.jetcityequipment.com

www.cisco-equipment.com

www.westraxmachinery.net

8111 Mills Road Houston, TX 77064 800-234-5007 281-807-9777

33345 SR 20 Oak Harbor, WA 98277 360-675-4441

1706 S. 1st Street Artesia, NM 88210 800-748-1846

520 SE Loop 338 Odessa, TX 800-657-3673

19618 S. Susana Road Rancho Dominguez, CA 90221 800-411-4717

10219 State Avenue Marysville, WA 98271 360-651-9079

2707 Slaton Hwy Lubbock, TX 79404 877-745-9595

620 N. Bell St. San Angelo, TX 76903 800-496-0271

19885 Temescal Canyon Road Corona, CA 92881 800-411-4717

5000 Vasquez Blvd.

Denver, CO 80216 303/355-5900 Grand Junction, CO 970/241-1550 Colorado Springs, CO 719-576-5541

Milliken, CO 970/587-1188 Durango, CO 970/259-0455 Cheyenne, WY 307/634-5149

5524 West Ledbetter Drive Dallas, TX 75236 866-270-1700 214-388-1700

2713 Euclid Avenue Wenatchee, WA 98801 509-888-8181

611 N. Golden Key Street Gilbert, AZ 85233 602-397-8173

www.sakaiamerica.com (800) 323-0535

Page 30 • July 31, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

LeeBoy Announces Its 2021 Dealer Award Hamm’s Newest Winners for Top Overall Sales, More Solutions Lead LeeBoy recently announced the winners of its 2021 Dealer Awards.

Top overall sales dollars for all products • Ambrose • Stephenson Equipment • Ascendum • Nixon-Egli • Reynolds-Warren Top product support (based on top dollars in parts sales) — Ascendum Top marketing dealer — Dobbs Top paver dealer —Ambrose Top tack tank dealer — Nixon-Egli Top grader dealer — Ascendum Top broom dealer — Reynolds-Warren Top max dealer — Richmond Top patcher dealer (new) — Mid-South Top RW dealer (new) — Richmond Top FFL dealer (new) — Stephenson Equipment 

to Longer Life for Its Machines HAMM from page 23

Recycled plastics also are used wherever possible for constructing rollers.

Nixon-Egli

Environmentally-Friendly Operation, Service for Long Machine Life Durable products are especially sustainable. This is where Hamm’s telematics system comes in to play, as the service life of the rollers is extended through regular maintenance — and with optimal availability. The long service life of Hamm rollers also is reflected in the spare part philosophy. Hamm still supplies customers with spare parts for all models ever built. Moreover, most spare parts can be ordered separately — not just in assemblies.

Stephenson Equipment

Ascendum

Reynolds Warren

Environmentally-Friendly Products, Compaction Solutions With regard to products, Hamm follows the objective of “developing low-consumption machinery and machine control systems that ensure an efficient and, therefore, resourcefriendly work process on the construction site,” said Axel Römer, head of research and development.

Specific examples of this are compaction with oscillation, which emits little noise and conserves resources; process optimization through digital tools and networking; and consumption-reducing technologies in the area of the power train.

Hamm rollers also can be operated with non-fossil fuels such as biodiesel or hydrotreated vegetable oil (HVO).

Today, many machines can already work with these types of fuels, and applications are being expanded. Biodegradable hydraulic oils also are part of the standard supply range.

Sustainable Shipping Hamm relies on sustainable materials when shipping spare parts. Films and plastic are avoided as far as possible, and polystyrene packing peanuts are taboo. Instead, Hamm packages spare parts in cardboard; packing paper acts as a fill material and padding. Moreover, Hamm receives a large portion of spare parts and wear parts already ready to ship with the corresponding packaging. Material-intensive repackaging — quite common in the sector — is therefore not required.

Ambrose Equipment

Dobbs

Mid-South

Wave Goodbye to Paper Consumption A shift also can be seen in machine documentation — it has been completely moved to data carriers. In its in-house documentation center, Hamm prints documents only upon request based on the “print on demand” principle. It has therefore been possible to reduce the need for paper by more than 70 percent.

For more information, visit wirtgen-group.com/en. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 31, 2022 • Page 31

BUILT TO CONNECT

Efficiency and Productivity Designed with safety and operator comfort in mind, the Shuttle Buggy® material transfer vehicle features adaptive cruise control, bright LED lighting, four-wheel steering for easy transport and ground-level maintenance access for added convenience. Operators can rely on clear sightlines and the ground operator is safely protected inside the structure of the machine. The Roadtec SB-3000 is the perfect blend of traditional craftsmanship and modern technology.

astecindustries.com ARIZONA/NEVADA/UTAH

CALIFORNIA

Goodfellow Corporation www.goodfellowcorp.com (801) 796-6126

Herrmann Equipment www.herrmannequipment.com N CA (916) 783-9333 S CA (909) 877-5597

OREGON/WASHINGTON/ MONTANA/IDAHO

TEXAS

Modern Machinery www.modernmachinery.com (800) 332-1617

Closner Equipment www.closner.com (210) 732-2131

WYOMING/COLORADO

Power Motive Corporation www.powermotivecorp.com (303) 355-5900

Page 32 • July 31, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

866-430-7539

www.jfwequipment.com sales@jfwequipment.com

Bomag’s BM 2200/65 Sets Standard for Performance

Serving the Asphalt Industry for 30 Years 2010 Rosco Max II distributor, 1900 gallons, EZ-2S computer w/1 ft cut-offs, diesel burners, 12 ft spray bar, 2010 Freightliner M2 w/Mercedes diesel eng, manual trans - $98,000

New Marathon TPS500PT tack distributor, Honda gas eng, 18GPM pump, 500 gal, 5’ spray wand w/50’ hose, hose reel, 6’ spray bar, operator’s platform, propane burners, flushing system, electric brakes - $26,650

New Marathon TPS115S tack distributor, Honda gas eng, 10GPM pump, 115 gallons, 5 ft spray wand w/50ft hose, hose reel, 80,000 BTU propane burner, flushing system - $10,300

New Marathon TPS250T tack distributor, Honda gas eng, 18GPM pump, 250 gal, 5 ft spray wand w/50 ft hose, 6 ft spray bar, operator’s platform, propane burners, flushing system, electric brakes - $17,950

2015 Hamm HD12VV double drum 47” vibratory roller, water system, Kubota diesel engine, 3 ton roller - $31,000

New Warren aggregate tailgate spreaders, GS84 & GS87, 8 ft wide maximum spreading w/1 ft gates, gravity flow - $5,900 - $6,300

2015 Laymor Sweepmaster SM400 broom, Kubota diesel engine, water system, 8 ft broom, cab w/heat & a/c, all new tires - $36,000

2018 Broce BW260 broom, Kubota diesel engine, 8 ft broom, water system, tow hitch - $26,000

2006 Cat AS2301 electric screed, 10-18 ½ ft, power crown, slope & height - $4,500

3517 Wayne White Rd., Climax, NC 27233

With its lighter, more compact and highly maneuverable design, the new Bomag BM 2200/65 large planer raises the bar for performance and operating ease and comfort for mills in its class.

A modest, 58-in. milling radius — up to 14 percent smaller than other models — improves machine productivity in the field, increasing efficiency in tight-radius applications like small roundabouts and cul-de-sacs, according to the manufacturer.

Its conveyor offers a 16-ft. discharge height plus larger, 130-degree conveyor slewing angle — 65 degrees to the left/right of center — allowing material to be efficiently discharged into trucks on both sides of the mill. To facilitate transport, the conveyor retracts to a length 23.6 in. shorter than previous designs.

Meeting Tier IV Final/Stage V emissions standards, the mill’s powerful 630 hp (470 kW) engine effectively matches power with milling speed for greater operating efficiency. The slim profile of the advanced Bomag BMS15L quick-change cutting tooth holder system reduces resistance and delivers up to 20 percent fuel savings.

System design extends holder service life to lower costs. Offering a range of milling drum designs and the choice of three different rotor speeds to tailor rotor speed to the job, the BM 2200/65 planer can be used on a wide range of asphalt and concrete milling applications.

Intuitive operation is the hallmark of the new 60,296-lb. BM 2200/65 half-lane mill.

To simplify milling control, Bomag Easy Cut technology automatically regulates the height of the rear drive, so the rear of the machine follows the front to its set depth, making the operator’s work simpler. Bomag Easy Level clearly displays grade and slope settings on the large 7-in. display, and settings are quickly changed with minimal screen navigation.

Comfort, Visibility, Efficiency Designed for comfort and efficiency, the BM 2200/65’s vibration-isolated operator’s station delivers comfortable operation from either a seated or standing position.

Additional cushioning at the platform’s standing areas help to ensure fatigue-free operation. Stepless platform side-shift up to 7.8 in. provides added visibility to the right cutting edge and side plate, allowing the operator to hold the milling line. Minimal navigation with limited submenus to get to machine parameters delivers intuitive, efficient operation, according to the manufacturer.

The mill’s slim contoured design gives the operator all-round visibility to the machine.

Enhanced forward visibility offers operators an unprecedented view of the cutting edge, milling track and the front danger zone around the conveyor for exceptional milling precision. A flat rear design offers an improved view of the area behind the mill for increased operating safety.

The standard water spray and dust extraction systems, complete with conveyor shrouding, efficiently removes fine particulate matter from the machine. Removing up to 80 percent more fine dust particles smaller than 10 microns in size, the optional Bomag ion dust shield meets the most stringent fine dust regulations.

With all key machine service points easily accessible, routine maintenance is completed quickly and efficiently. All filters can be conveniently reached from the operator’s platform through the wide-opening engine hood, as are the fill ports for fuel and AdBlue.

Large left- and right-hand service panels provide simple accessibility to the machine’s auxiliary drive and milling gear, while engine service points are easily accessed from both above and below.

For more information, visit www.bomag.com. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 31, 2022 • Page 33

KIRBY-SMITH MACHINERY INC.

NUECES POWER EQUIPMENT

www.kirby-smith.com

www.nuecespower.com

6715 W. Reno Oklahoma City, OK 800-375-3339 McAlester, OK 918-310-1550 Tulsa, OK 918-438-1700

Dallas, TX 214-371-7777 Fort Worth, TX 817-378-0600 Abilene, TX 325-692-6334 Amarillo, TX 806-373-2826

Lubbock, TX 806-745-2112 Odessa, TX 432-333-7000 Waco, TX 254-261-1370

Corpus Christi, TX 361-289-0066 Laredo, TX 956-725-0066 San Benito, TX 956-361-0066 Victoria, TX 361-576-0066

Vinton, TX 915-541-0066 Houston, TX 713-247-0066 San Antonio, TX 210-310-0066

HONNEN EQUIPMENT CO. www.honnen.com Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090

Idaho Falls, ID 208-523-9915 Salt Lake City, UT 801-262-7441 Ogden, UT 801-627-0049 St. George, UT 435-652-8003

Casper, WY 307-266-4474 Cheyenne, WY 307-316-9800 Gillette, WY 307-685-4288 Rock Springs, WY 307-382-5284

Page 34 • July 31, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

NAPA Unveils Emissions Inventory for Asphalt Production Cradle-to-gate emissions associated with asphalt mix production in the United States represented approximately 0.3 percent of total U.S. greenhouse gas (GHG) emissions in 2019. By comparison, U.S. Environmental Protection Agency data indicate that transportation emissions from fossil fuel combustion represented 27.8 percent of total emissions in 2019, while industrial emissions represented 25.3 percent.

That’s according to a new report from the National Asphalt Pavement Association (NAPA), authored by its director of Sustainable Pavements, Joseph Shacat; vice president of Engineering, Research, & Technology, J. Richard Willis; and TriSight LLC partner Ben Ciavola.

The report, GHG Emissions Inventory for Asphalt Mix Production in the United States (SIP 106), is the first national cradle-to-gate assessment of GHG emissions associated with the production of asphalt pavement mixtures that uses a life cycle assessmentbased methodology.

The emissions inventory includes upstream raw materials inputs, transportation of those materials to the production site, and plant emissions (including upstream energy processes) for the years 2009 to 2019.

“Publishing this report puts NAPA and the asphalt pavement industry at the forefront of transparency among carbon emitters,” said NAPA President and CEO Audrey Copeland. “We’re demonstrating our commitment to doing better — as prescribed in The Road Forward initiative we announced in January — by taking stock of where we are and identifying proven as well as innovative strategies to reduce carbon emissions.”

“To our knowledge, this is one of the first cradle-to-gate GHG emissions inventories for any major U.S. industry,” added Shacat.

“While there are several studies that show cradle-to-gate emissions intensities for various industries, we’re not aware of any publicly available reports that add up all of the emissions for a given industry nationwide.”

Jim Mertes, director of Environmental Affairs at Construction Resources Management Inc., A Walbec Group Company, and chair of NAPA’s Sustainability Committee, described the report as “a comprehensive industry benchmark, which can be used to measure future industry improvements in carbon reduction.”

What’s more, said Mertes, “It identifies what we can achieve using existing strategies and technologies and demonstrates the unprecedented technological challenge ahead to get to net zero.”

By identifying “avoided emissions,” the report demonstrates how existing environmentally preferable technologies like reclaimed asphalt pavements (RAP), reduced-temperature asphalt mix production

(called warm-mix asphalt, or WMA), and switching to alternative fuels for plant operations have already had an industry-wide impact on limiting emissions.

In 2019 alone, the industry avoided 2.9 million metric tons (MMT) CO2e emissions — equivalent to the annual emissions from approximately 630,000 passenger vehicles.

The authors note that increased implementation of such measures could further reduce emissions by up to 24 percent relative to 2019. In fact, each ton of RAP used in new asphalt mixtures reduced 2019 GHG emissions by approximately 27 kg CO2e.

However, they caution, “Although the report provides an estimate for the national

average GHG emissions associated with asphalt mix production, it is not an industry average Environmental Product Declaration (EPD) and should not be used as a benchmark for project-level decision making during procurement or project delivery.”

Nonetheless, the report “will be a valuable tool as discussions with government, agencies, and owners accelerate in the coming years,” said Ron Sines, vice president, Performance — Asphalt, CRH Americas Materials Inc. “Additionally, it provides clear direction on what the industry should be doing today, as well as what the industry could do in the future, if the identified obstacles can be overcome,” added Sines, who chaired NAPA’s Climate Stewardship Task Force, which created The Road Forward, the industry’s goal to reach net zero carbon emissions by 2050.

To advance that goal, the report states, “New technologies and additional innovative practices will need to be developed and implemented to achieve more significant GHG emission reductions.”

The industry, along with its suppliers, partners and customers, must invest in emission reduction strategies related to materials, transportation, and mix production.

Examples include carbon capture, utilization and storage (CCUS); use of carbon sequestering bio-based materials; use of local recycled materials and alternative fuels for trucking; and technologies that reduce burner fuel consumption.

Raven Adams, vice chair of NAPA’s Sustainability Committee and Granite Construction’s sustainability manager, remarked, “NAPA’s publication of this document will empower our industry to advocate for the funding, research, and support needed to allow us to respond to climate change.”

For more information, visit www.asphaltpavement.org. 

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 31, 2022 • Page 35

Products shown with optional equipment.

MAULDIN Paving g Products... MASTERS S OF THE MA AT T! Contact your MAULDIN N dealership today to see the newly redesigned 1860 Commercial Paver For more information visit us at www.4aMauldin.com.

Closner Equipment www.closner.com 6532 East Highway 114 13800 FM 973 N Rhome, TX 76078 Manor, TX 78653 (817) 708-9108 (512) 272-8200

21910 FM 2252 Schertz, TX 78154 (210) 732-2131

Coming Soon Houston, TX

Power Equipment Company www.power-equip.com 721 Candelaria Rd NE 29268 Hwy 160 Albuquerque, NM 87107 Durango, CO 81303 (505) 345-7811 (970) 247-8830

1150 Madison Lane Farmington, NM 87401 (505) 326-1413

Tri-State Truck & Equipment, Inc. www.tste.com

5250 Midland Rd. Billings, MT 59101 (406) 245-3188

1271 N. Derrick Dr. Casper, WY 82604 (307) 472-1818

5024 Tri Hill Frontage Rd. Great Falls, MT 59404 (406) 452-9551

1319 Elk St. Rock Springs, WY 82901 (307) 362-4000

200 Floss Flats Rd. #1 Belgrade, MT 59714 (406) 388-5815

Page 36 • July 31, 2022 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • July 31, 2022 • Page 37

-,+,*)('&)(%)($#)"&&!

-, ! &#+)**( (" "! ! )

MF25 500CS Feed der BANE MACHINER RY, INC. %%%$ 1 /!1# " /. . $# !

BEE EQUIPMENT SA ALES LTD. 2449 Manana R Rd. %%%$ /// " !/ -1+/-$# !

1++1-)( ( 2506 Slaton High8way (214) 352-2468

#0)( ( $( .

. )( (806) 745-15141 (817) 847-5894 +/.)(

(903) 597-66411

Challenging the Status Quo — NOW with IMIX two stage mixi

C. L. BOYD CO., INC. %%%$#+ *$# !

BEE EQUIPMENT SA ALES LTD. 4220 West Reno A Ave. %%%$ /// " !/ --1+/-$# !

0+1 !1('" )( ( 2506 Slaton• High (800) OKC-BOYD (405way ) 942-8000

#0)( ( Ardmore, OK K1 (806) 745-151 (866) 720-2693 • (580) 224-2693 Lawton, OK (800) 633-2693 • (580) //355-6667 C. L. BOYD CO., INC. %%%$#+ *$# !

4220 West Reno A Ave. 0+1 !1('" )( ( (800) OKC-BOYD • (405) 942-8000 Ardmore, OK K PMENT CLAIREMONT EQUIP (866) 720-2693 / " !

• (580) 224-2693 %%%$#+1"./! !/ $# !

7651Lawton, RonsonOK Roaad (800)San 633-2693 Diego,• (580) CA 92//355-6667 111

(858) 278-8351 1330 W Mission Rooad Escondido, CA 92029 (760) 739-9100 440 West Aten Rooad ! /."1+)('&( (760) 355-7700 4726 Convoy Streeet San Diego, CA 92111 (858) 278-8338

) )) ) ) )

CLAIREMONT EQUIP PMENT %%%$#+1"./! / " ! !/ $# !

7651 Ronson Roaad San- /.

Diego, CA 92111 '+ ( " !/ / (858) 278-8351 %%%$#+ - /.$# !

1330East W Mission Rooad 6532 Highway 114 Escondido, CA7607 92029 Rhome, TX 78 (760) 739-9100 (817) 708-9108 440 West Aten Rooad 21910 FM 2252 ! /."1+)('&( Schertz, TX 781554 (760) 355-7700 (210) 732-2131 4726 Convoy Streeet 13800 FMCA973 N San Diego, 92111 Manor, TX 786533 (858) 278-8338

(512) 272-8200 Coming Soon Houston, TX

'+ - /.( " !// %%%$#+ - /.$# !

6532 East Highway 114 Rhome, TX 760778 COOPER (817)EQUIPMEN 708-9108 NT CO. www.cooperequip. .com 21910 FM 2252 5210 N Loop 1604 4 Schertz, TX 781554 E San(210) Antonio, TX 788247 732-2131 (210) FM 657-5151 13800 973 N Manor, TX 78653 3vd.

201 Commerce Blv (512) 272-8200 Georgetown, TX 788626

(512) 930-5151

COOPER EQUIPMEN NT CO. www.cooperequip..com

DOGGETT HEA AVY MACHINER RY Y SERVIC DOGGETT HEA ACES VY www.doggett.com m CES MACHINER RY Y SERVIC

MODERN MACHINER RY www.modernmachinery. com RY MODERN MACHINER

' . .1 /( , ,#/ www.modernmachinery. com

&+/ 1 *."1)( & m www.doggett.com

(318) 442-0455 &+/ 1 *."1)( & Baton Rouge, LA (318) 442-0455 (225) 291-3750 Baton Rouge, LA Broussard, LA (225) 291-3750 (337) 837-9481 Broussard, LA Covington, LA (337)893-3005 837-9481 (985) Covington, LA 10/(' 1.+/-)( & (985)430-3045 893-3005 (337) 10/ (' 1.+/-) Monroe, LA ( & (337)343-8787 430-3045 (318) Monroe, LA LA Shreveport, (318)631-3090 343-8787 (318) St. Rose, LA LA Shreveport, (504) (318)466-5577 631-3090 Beaumont, St. Rose,TX LA (409) (504)842-1754 466-5577 Bryan, TX TX Beaumont, 823-1905 (979) 1905 (409)823 842-1754 Corpus Christi, TX X Bryan, TX (361) 289-0727 (979) 823 1905 823-1905 Houston, TX Corpus Christi, X (713) 679-6700 TX (361) 289-0727 Longview, TX Houston, TX (903) 758-3326 (713) 679-6700 Lufkin, TX Longview, (936) 634-8801TX (903) 758-3326 San Juan, TX TX (956)Lufkin, 787-0001 (936) )( +/.)634-8801

(903) San592-8900 Juan, TX (956) 787-0001 Victoria, TX (361) 570-6666 +/.))(

"-- +1) '( . 1 1 .1 /( , ,#/ (409) 842-1754 "-- +1)( 1 1 Boise,(409) Idaho842-1754 (208) 336-8670 Boise, Idaho Jerome, Idaho (208) 336-8670 (208) 324-4522 Jerome, Idaho #1 /++ )( *1 (208) 324-4522 (800) 829-4450 2"++" -)( #1 /++ 1 1)( *1 (800) 829-4450 (800) 735-2589 ( 1 1 1 ' + ! "1( 2"++" 1++-)( -) 1 (800) 735-2589 (800) 434-4190 ' + !Oregon "1( 1++-)( 1 1 Eugene, (800) 434-4190 (800) 826-9811 ( ./ Oregon . +1 *) .

Eugene, (800) 950-7779 (800) 826-9811 Kent, Washington . +1 *)( ./ .

(800) 669-2425 (800) 950-7779 Rochester,Kent, Washingto g n Washington (800) 304-4421 (800) 669-2425 n Spokane, Washington Rochester, Washingto g n (800) 541-0754

(800) 304-4421 n Spokane, Washington (800) 541-0754

ROAD MACHINER RY www.roadmachinery.co om

(903) 592-8900 Victoria, TX (361) 570-6666

5210 N Loop 16044 E San Antonio, TX 788247 (210) 657-5151 201 Commerce Blvvd.

Georgetown, TX 788626 (512) 930-5151

Follow Dyynapac North America

) )

) ) ) )

dyn napac.us | 800-65 51-0033

902 S. 7th Street Phoenix, AZ 85034 (480) 545-2400 Prescott, AZ (928) 778-5621 Tuscon, AZ (520) 623-8681 210/.-,/+*)('& (661) 695-4830 Perris, CA (909) 355-3600

Page 38 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Page 40 • July 31, 2022 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

Model

Loader SAE HP (kW)

Loader Lift Capacity lbs. (kg)

Loader Breakout Force lbs. (kg)

Backhoe Loading Height ft. (m)

Max Digging Depth ft. (m)

Travel Speed 4th Gear Fwd MPH (kmh)

Operating Weight lbs. (kg)

90 (67) 97 (72) 110 (82) 110 (82) 74 (55)

6,803 (3,086) 7,044 (3,195) 8,425 (3,821) 8,202 (3,720) 6,503 (2,950)

10,622 (4,818) 10,947 (4,965) 10,873 (4,932) 12,776 (5,795) 9,607 (4,358)

11.9 (3.6) 12.1 (3.7) 12.0 (3.7) 13.1 (4) 11.7 (3.6)

14.9 (4.5) 14.6 (4.4) 14.6 (4.4) 15.6 (4.8) 15 (4.6)

24.6 (40) 24 (38.8) 24.1 (38.8) 25.2 (40.6) 21.3 (34)

16,589 (7,525) 17,269 (7,833) 20,077 (9,107) 20,532 (9,313) 15,810 (7,171)

70 (52) 69 (51) 86 (64) 92 (68) 92 (68) 107 (80) 104 (76) 131 (98)

6,730 (3,053) 5,862 (2,659) 6,730 (3,053) 7,230 (3,280) 7,230 (3,280) 7,230 (3,280) 8,782 (3,983) 8,886 (4,031)

12207 (5,537) 10,898 (4,943) 12207 (5,537) 12,643 (5734) 12,643 (5734) 12,643 (5734) 13,560 (6,151) 13,560 (6,151)

12 (3.7) - 13.9 (4.2) N/A 12 (3.7) - 13.9 (4.2) 12 (3.7) - 13.9 (4.2) 12 (3.7) - 13.9 (4.2) 13 (3.9) - 15.1 (4.6) 13.5 (4.1) - 15.4 (4.7) 14.9 (4.5) - 17.3 (5.3)

14.2 (4.3) N/A 14.2 (4.3) 14.2 (4.3) 14.2 (4.3) 15.5 (4.7) 15.5 (4.7) 17.0 (5.2)

23 (37) 22 (36) 25 (40) 25 (40) 25 (40) 26 (41) 24 (39) 25 (40)

15,426 (6,997) - 24,251 (11,000) 17637 (8,000) 15,591 (7072) - 24,251 (11,000) 16,279 (7384) - 24,251 (11,000) 16,279 (7384) - 24,251 (11,000) 16,590 (7625) - 24,251 (11,000) 21,544 (9,772) - 29,321 (13,300) 24,039 (10,904) - 29,321 (13,300)

49 (36.3) 74 (55) 74 (55) 74 (55) 91 (68) or 109 (81) 109 (81) 109 (81) 109 (81)

1,466 (665) 3,364 (1,526) 7,705 (3,495) 7,670 (3,479) 9,233 (4,188) 10,225 (4,638) 10,225 (4,638) 10,225 (4,638)

8-9 (2.67) 12-3 (3.72) 15-6 (4.72) 14-0 (4.27) 14-0 (4.27) 15-3 (4.65) 14-0 (4.27) 15-3 (4.65)

10-1 (3.08) 14-2 (4.33) 18-6 (5.63) 18-6 (5.63) 18-6 (5.63) 20-1 (6.12) 18-6 (5.63) 20-1 (6.12)

4.6 (7.5) 24.9 (40.1) 22.8 (36.7) 22.8 (36.7) 26 (41.8) 26 (41.8) 26 (41.8) 26 (41.8)

9,572 (4,342) 13,514 (6,130) 17,196 (7,800) 17,704 (8,030) 18,614 (8,443) 19,090 (8,659) 19,172 (8,696) 19,648 (8,912)

CASE 580N 580 Super N 580 Super N WT 590 Super N 580N EP

CATERPILLAR 415 415 IL 416 420 420 XE 430 440 450

JCB 1CXT 3CX Compact 3CX 3CX-14 3CX-14 Super 3CX-15 Super 4CX-14 Super 4CX-15 Super

5,180 (2,350) 8,285 (3,758) 13,603 (6,170) 13,603 (6,170) 13,603 (6,170) 13,603 (6,170) 13,728 (6,227) 13,728 (6,227)

JOHN DEERE 310L EP 310L 310SL 310SL HL 315SL 410L 710L

69 (52) 100 (75) 103 (77) 113 (84) 103 (77) 116 (87) 148 (110)

6,610 (2,998) 6,602 (2,995) 7,698 (3,492) 7,552 (3,425) 7,225 (3,277) 6,967 (3,160) 9,866 (4,475)

9,564 (4,338) 9,512 (4,314) 11,052 (5,013) 11,116 (5,042) 10,608 (4,812) 10,361 (4,701) 16,539 (7,505)

11.5 (3.48) 11.1 (3.38) 11.3 (3.42) 11.11 (3.63) 12.0 (3.65) 13.0 (3.97) 14.7 (4.45)

13.8 (4.16) 14.1 (4.30) 14.3 (4.35) 15.1 (4.59) 13.5 (4.08) 15.11 (4.85) 17.3 (5.26)

23.6 (38.0) 22.8 (36.7) 23.1 (37.1) 23.9 (38.4) 24.7 (39.7) 23.9 (38.4) 22.9 (36.9)

13,822 (6,270) 14,669 (6,654) 15,872 (7,199) 16,571 (7,516) 17,554 (7,962) 17,786 (8,068) 25,588 (11,607)

24.3 (18.1) 47.1 (35.1) 63 (47)

1,301 (590) 2,848 (1292) 3,960 (1796)

2,343 (1,062) 4531 (2,055) 5,992 (2,717)

6.4 (1.9) 7.7 (2.4) 10.9 (3.3)

8.3 (2.5) 10 (3) 14.2 (4.3)

11.1 (17.8) 14 (22.5) 15.5 (24.9)

4,001 (1,815) 7,205 (3,268) 8,925 (4,048)

74 (55)

8,287 (3,759)

10,341 (4,691)

13.8 (4.2)

17.10 (5.4)

24 (38)

16,138 (7,320)

8,157 (3,700) 7,996 (3,627) 7,606 (3,450) 7,996 (3,627)

13,778 (6250) 13,977 (6,340) 14,709 (6,672) 13,977 (6,340)

11.9 (3.62) 12.5 (3.81) 12.5 (3.81) 12.8 (3.90)

18.41 (5.61) 18.41 (5.61) 18.41 (5.61) 18.91 (5.76)

24 (38) 24 (38) 24 (38) 24 (38)

18,298 (8,300) 18,525 (8,403) 18,525 (8,403) 18,525 (8,403)

KUBOTA B26TLB L47TLB M62TLB

MECALAC TLB840R

NEW HOLLAND B75D B95C B95C TC B110C

74 (55) 97 (72) 97 (72) 110 (82)

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • July 31, 2022 • Page 41

PLEASE CONTACT YOUR LOCAL DEALER ALASKA TYLER RENTAL, INC. Juneau • 907-780-2210 Ketchikan • 907-225-6069 YUKON EQUIPMENT, INC. Anchorage • 907-277-1541

ARIZONA ARNOLD MACHINERY COMPANY Phoenix • 602-414-1900 Tuscon • 520-294-7677 BINGHAM EQUIPMENT Buckeye • 623-853-1000 Casa Grande • 520-836-8700 Cottonwood • 928-646-5388 Lakeside • 928-251-0403 Mesa • 480-969-5516 Parker • 928-669-9271 Phoenix • 623-850-6000 Prescott Valley • 928-350-4295 Roll • 928-785-3319 Tucson • 520-887-7799 Tucson • 520-889-6396 Yuma • 928-726-4701 BOBCAT OF KINGMAN Kingman • 928-757-2966 BOBCAT OF LAKE HAVASU Lake Havasu City • 928-855-3577 SONSRAY MACHINERY Phoenix • 602-610-0671 Tucson • 520-900-6589

WHEN EVERY STRIKE COUNTS, COUNT ON RAMMER Rammer Excellence and Performance hammers and Ho-Pac compactor drivers get the job done, strike after strike.

CALIFORNIA CONTRACTOR EQUIPMENT RENTAL Bakersfield • 661-587-3111 RDO EQUIPMENT CO. Riverside • 951-682-5353 RDO EQUIPMENT CO. (WISE) Lakeside • 619-270-4300 STEEL UNLIMITED Riverside • 909-841-5905 SONSRAY MACHINERY LLC El Cajon •619-873-0123 Fontana • 909-355-1075 Los Angeles • 562-903-7377 Redding • 530-245-9000 Sacramento • 916-649-0096 San Leandro • 510-562-0653 TRI-WEST TRACTORS, INC. Livermore • 925-455-8200 VOLVO CONSTRUCTION EQUIPMENT SALES TO CALIFORNIA Bakersfield • 661-387-6090 Corona • 951-277-7620 Fresno • 559-834-4420 Lakeside • 619-441-3690 Sacramento • 916-504-2300 San Leandro • 510-357-9131 Turlock • 209-410-6710

Visit rammer.com

See Rammer Products MODERN MACHINERY CO., INC. Boise • 800-221-5211

COLORADO

MONTANA

POWER EQUIPMENT CO. Colorado Springs • 888-690-8292 Denver • 800-883-9284 Grand Junction • 800-898-7319 Johnstown • 970-669-6209 WORLDWIDE RENTAL SERVICES Aurora • 303-341-5555

MODERN MACHINERY CO., INC. Missoula • 800-332-1617

HAWAII HAWAII TRUCK PARTS SALES AND SERVICES Kapolei • 808-682-6109

IDAHO ARNOLD MACHINERY COMPANY Boise • 208-887-6000 Idaho Falls • 208-523-0822 Twin Falls • 208-733-1715

NEVADA ARNOLD MACHINERY COMPANY Elko • 775-738-4443 Las Vegas • 702-642-9000 Sparks • 775-356-1511 SHAFER EQUIPMENT CO., INC. Sparks • 888-578-5481

NEW MEXICO 4 RIVERS EQUIPMENT Farmington • 505-326-1101 POWER EQUIPMENT CO. Albuquerque • 505-344-9466 Farmington • 866-293-5237

OKLAHOMA G.W. VAN KEPPEL COMPANY Oklahoma City • 405-495-0606 Tulsa • 918-836-8851

OREGON FEENAUGHTY MACHINERY CO Portland • 503-282-2566 MODERN MACHINERY CO., INC. Eugene • 800-826-9811 Portland • 800-950-7779

TEXAS 2-C EQUIPMENT, LLC Jarrell • 512-746-2350 CRUSHING TIGERS Austin • 512-276-2408 GEORGE P. BANE, INC. Tyler • 800-594-2200

H&V EQUIPMENT Corpus Christi • 888-598-5663 San Antonio • 800-933-5623 Progreso • 956-565-3788 SIERRA MACHINERY El Paso • 915-772-0613

UTAH ARNOLD MACHINERY COMPANY Salt Lake City • 801-972-4000 ATLAS MACHINERY COMPANY Salt Lake City • 801-322-1300 BONNEVILLE EQUIPMENT Sandy • 801-566-8891 Springville • 801-489-0593 HOLLAND EQUIPMENT Salt Lake City • 801-972-1601

WASHINGTON CENTRAL MACHINERY SALES, INC. Moses Lake • 800-572-0430 Pasco • 888-547-9003 KITSAP TRACTOR & EQUIPMENT Silverdale • 888-988-6767 MODERN MACHINERY CO., INC. Kent • 800-669-2425 Spokane • 800-541-0754 SONSRAY MACHINERY LLC Auburn • 253-735-2702 TYLER RENTAL, INC. Chehalis • 360-748-3440 VALLEY TRACTOR AND EQUIPMENT Wenatchee • 800-461-5539

WYOMING POWER EQUIPMENT CO. Casper • 307-577-9700

Page 42 • July 31, 2022 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

UPCOMING SPECIAL SECTIONS ISSUE

18

Utility Construction

Ad Closing Date Publishing Date

ISSUE

20

Off-Road Trucks

Ad Closing Date Publishing Date

ISSUE

22 24 26

October 12, 2022 October 23, 2022

Trailers

Ad Closing Date Publishing Date

ISSUE

September 14, 2022 September 25, 2022

Crawler Loaders, Dozers

Ad Closing Date Publishing Date

ISSUE

August 17, 2022 August 28, 2022

November 9, 2022 November 20, 2022

Compact Equipment

Ad Closing Date Publishing Date

December 7, 2022 December 18, 2022

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • July 31, 2022 • Page 43

SAVVE MMONEY ANDD TIME SCREENING BUCKET The screening bucket for your excavator.

When installed on your excavator, the unit separates the fine material from the larger pieces of inert material.

REDUCE >> REUSE >> RECYCLE See the whole product range on: MBCRUSHER.COM info@mbcrusher.com

Page 44 • July 31, 2022 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

New Holland Construction Offers B75D Loader Backhoe Loader backhoes have been an efficient tool in every operation bringing maximum force and surgical precision from either end of the machine.

New Holland Construction’s B75D loader backhoe, its economy class solution, is ready to tackle a wide range of projects with 74 gross hp, over 18 ft. of maximum digging depth and standard 4WD. “Adding the economy level B75D loader backhoe is the new solution for diverse operations,” said Ryan Anderson, construction product marketing manager, New Holland North America.

“Its high-performing lift capacity, comfortable operator’s platform and outstanding digging depth will increase productivity in a wide range of work. The B75D is fit for operations needing something a bit smaller, but still looking for competitive and productive power.”

The B75D offers fuel-efficient power with a simple, costeffective Tier IV Final solution. The 74-hp 3.4-L FPT engine features a diesel oxidation catalyst (DOC) for increased fuel efficiency and faster response times. No fluids to add or diesel particulate filters to replace means simplified maintenance to operator.

Standard 4WD and a power shuttle synchromesh transmission with four forward and four reverse gears puts the operator in complete control in nearly any job or terrain. The operator environment of the B75D keeps safety at the forefront with a ROPS/FOPS certified canopy. Four front and two rear halogen work lights keep the operation running into the night.

The B75D offers fuel-efficient power with a simple, cost-effective Tier IV Final solution. The 74-hp 3.4-L FPT For more information, visit www.newholland.com.  engine features a diesel oxidation catalyst (DOC) for increased fuel efficiency and faster response times.

Deere Improves Performance With Its L-Series Upgrades John Deere’s upgraded L-Series backhoe loaders offer significant machine improvements designed to boost productivity, maximize uptime and reduce operating costs.

Ranging across the L-Series Backhoe lineup, the updates, which include engine upgrades, new pressure-compensated loadsensing (PCLS) hydraulics on the 310SL model and machine control improvements, enhance operation and machine performance.

One of the most notable updates, the 310L, 310SL, 315SL, 310SL HL and 410L models are equipped with a 4.5L John Deere PowerTech EWL engine, increasing power, improving torque and providing greater reliability. This Final Tier IV engine results in a boost in horsepower across the models, while the removal of the exhaust gas recirculation system and components improves reliability, according to the manufacturer.

The redesign also includes improved filter locations for easier access when changing or servicing fuel and diesel exhaust fluid filters.

Additionally, the 310SL is now available with PCLS hydraulics.

Already offered on the 310SL HL, 410L and 710L, the PCLS system results in increased productivity and improved backhoe controllability at any engine speed. In

and extendable dipper stick have been integrated into the backhoe pilot controls, improving ease of use.

Available as a base offering on the 310SL, 315SL, 310SL HL, 410L and 710L models, AutoShift technology automatically adjusts the transmission to the most appropriate gear for an enhanced operator experience. Additionally, the five models feature Auto Ride Control as the only ride control option, eliminating the need to manually turn on and off during load and carry applications. Auto Ride Control enhances ease of use, improves ride quality and reduces front bucket material spillage.

Other key features include an LED One of the most notable updates, the 310L, 310SL, 315SL, 310SL HL and 410L models boom light kit for increased visibility to the are equipped with a 4.5L John Deere PowerTech EWL engine, increasing power, bottom of the trench and a redesigned improving torque and providing greater reliability. loader lever linkage that reduces resistance addition, trenching operation can be con- upon the best features found on the L-Series and improves its throw and feel.

The 310L EP model includes updates ducted at lower engine rpm, reducing fuel machines, resulting in a lineup designed to designed to deliver more value at an ecoconsumption and lowering job site noise. power through the toughest jobs.”

“We are committed to continuously The 310SL is equipped with Lift Mode. nomical price. Key changes to the 310L EP improving our equipment to offer our cus- When enabled, it automatically sets the include a simpler front-axle design and a tomers more value out of their machines,” engine speed to 1,400 rpm and increases four-speed manual synchromesh transmissaid Brian Hennings, product manager, John max hydraulic pressure to 4,000 psi, for up sion. Directional changes remain controlled Deere Construction & Forestry. “With these to a 10 to 15 percent increase in backhoe lift with a steering column mounted lever for upgrades, we are directly addressing our capacity. Additionally, buttons for the horn, forward, neutral and reverse.

For more information, visit customers’ needs. These upgrades build selective flow, auxiliary proportional roller www.deere.com/. 

Construction Equipment Guide • Backhoes & Attachments Section • www.constructionequipmentguide.com • July 31, 2022 • Page 45

REDEFINE THE DAILY GRIND.

Looking to maximize your day-to-day operations? Pressure-compensated load-sensing (PCLS) hydraulics on the newly redesigned John Deere 310SL Backhoe Loader smoothly increase your cycle times with 16% greater rear backhoe trenching productivity* and 15% more craning capacity.** Along with John Deere Connected Support™, you can elevate your underground operation above expectations and plan to do more every day.

JohnDeere.com/Backhoes

*Based on rear backhoe trenching productivity study, compared to previous model. / **With Lift Mode enabled, compared to previous model.

HONNEN EQUIPMENT CO.

DOGGETT HEAVY MACHINERY SERVICES

www.honnen.com

www.doggett.com

Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049

Salt Lake City, UT 801-262-7441

Gillette, WY 307-685-4288

St. George, UT 435-652-8003

Rock Springs, WY 307-382-5284

Casper, WY 307-266-4474

Idaho Falls, ID 208-523-9915

Cheyenne, WY 307-316-9800

9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727

San Juan, TX 956-787-0001

Broussard, LA 337-837-9481

Monroe, LA 318-343-8787

Victoria, TX 361-570-6666

Covington, LA 985-893-3005

Shreveport, LA 318-631-3090

Alexandria, LA 318-442-0455

Longview, TX 903-758-3326

St. Rose, LA 504-466-5577

Baton Rouge, LA 225-291-3750

Lufkin, TX 936-634-8801

Tyler, TX 903-592-8900

Page 46 • July 31, 2022 • www.constructionequipmentguide.com • Backhoes & Attachments Section • Construction Equipment Guide

D E = =

!! ? " #$A E % % # = E " =F = & % ' = % G & ( # ? ) ="

! "#$ !% & !&'

& ! = = % ? " & = > ? ?

= =

BC

@

A

" ! = " ? * " + " ? " =" ! , " ! % !! -

PLEASE CONTACT YOUR LOCAL DEALER:

roadmachinery.com

honnen.com COLORADO

kirby-smith.com

Commerce City (Denver): 303-287-7506 Durango: 970-247-4460 Grand Junction: 970-243-7090

OKLAHOMA

ARIZONA Phoenix: 602-252-7121 • Prescott: 928-778-5621 Tucson: 520-623-8681

IDAHO

McAlester: 918-310-1550 Oklahoma City: 405-495-7820 Tulsa: 918-438-1700

Idaho Falls: 208-523-9915

TEXAS

UTAH

CALIFORNIA Bakersfield: 661-695-4830 • Fresno: 559-834-3149 Hayward: 510-659-1903 • Mojave: 661-824-2319 Perris: 909-355-3600 • Pico Rivera: 562-699-6767 Redding: 530-229-3820 • Sacramento: 916-375-3540 Santa Rosa: 707-544-4147

Abilene: 325-692-6334 Amarillo: 806-373-2826 Dallas: 214-371-7777 Ft. Worth: 817-378-0600 Hewitt: 254-261-1370 Lubbock: 806-745-2112 Odessa: 432-333-7000

Salt Lake City: 801-262-7441 St. George: 435-652-8003 West Haven (Ogden): 801-627-0049

WYOMING Cheyenne: 307-316-9800 Gillette: 307-685-4288 Mills (Casper): 307-266-4474 Rock Springs: 307-382-5284

smsequipment.com ALASKA Anchorage: 907-275-3300

! " # $" ! % $ & ! "' $ % $ " " ! " $ "' % ! " $ "' ( ! $ ) * $

<" " '<" $ "'

;

: ; +,,-

. /

0 112134,,12 .

511-6 7874+9--

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 47

Discover the value of My Komatsu My Komatsu iss your centralized por tal for $#"! " " $ machine telematics, access suppor t materials, order par ts and more from your phonne, tablet

# $#" ! "

matsu.koma tsu # # $$# myko !! #" ## # !! # # $ #$ $#

www.powermotivecorp.com DENVER HEADQUARTERS 5000 Vasquez Blvd., Denver, CO 80216 303-355-5900 Colorado Springs, CO • 719-576-5541 Durango, CO • 970-259-0455 Grand Junction, CO • 970-241-1550 Milliken, CO • 970-587-1188 Cheyenne, WY • 307-634-5149

www.wpi.com www.kirby-smith.com 6715 W Reno Avenue Oklahoma City, OK 73137 405-495-7820 McAlester, OK • 918-310-1550 Tulsa, OK • 918-438-1700 Abilene, TX • 325-692-6334 Amarillo, TX • 806-373-2826 Dallas, TX • 214-371-7777 Ft. Worth, TX • 817-378-0600 Lubbock, TX • 806-745-2112 Odessa, TX • 432-333-7000 Waco, TX • 254-261-1370

12320 S. Main Street Houston, TX 77035 713-723-1050 Buffalo, TX • 903-322-7150 Corpus Christi, TX • 361-884-8275 Edinburg, TX • 956-386-0107 Kilgore, TX • 903-984-2011 Pflugerville, TX • 512-251-0013 Port Arthur, TX • 409-721-5305 San Antonio, TX • 210-648-4444 Tomball, TX • 281-351-9016

www.clairemontequipment.com San Diego, CA • 858-278-8351 Escondido, CA • 760-739-9100 Fontana, CA • 909-429-9100 Imperial, CA • 760-355-7700 Indio, CA • 760-863-5558 San Diego, CA • 858-278-8338

www.roadmachinery.com Phoenix, AZ • 480-545-2400 Phoenix, AZ • 602-252-7121 Prescott, AZ • 928-778-5621 Tucson, AZ • 520-623-8681 Bakersfield, CA • 661-695-4830 Fresno, CA • 559-834-3149

Mojave, CA • 661-824-2319 Perris, CA • 909-355-3600 Redding, CA • 530-229-3820 Sacramento, CA • 916-375-3540 Santa Rosa, CA • 707-544-4147

Page 48 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Komatsu, Codelco Agree to Conduct Trial of New Mining Tunnel Boring Machine

Contact your local dealer:

ARNOLD MACHINERY CO. www.arnoldmachinery.com

Salt Lake City, UT

Sparks, NV

801-972-4000

775-356-1511

Idaho Falls, ID

Las Vegas, NV

208-523-0822

702-642-9000

Meridian, ID

Phoenix, AZ

208-887-6000

602-414-1900

Twin Falls, ID

Tucson, AZ

208-733-1715

520-294-7677

ASCO EQUIPMENT www.ascoeq.com

Abilene, TX

Perryton, TX

325-698-2726

806-435-7773

Amarillo, TX

Komatsu’s tunnel boring machine (TBM) for underground hard rock mining.

806-372-8386

Komatsu Ltd., through its subsidiary Komatsu Cummins Chile Ltda., has agreed with Codelco, a major state-owned mining company in Chile, to collaborate on trialing a new tunnel excavation method using Komatsu’s newly developed mining tunnel boring machine (TBM) starting in 2024 at Codelco’s Chuquicamata Mine in Chile.

Through trial use of the new machine, Komatsu and Codelco aim to speed up the potential introduction of this innovative technology.

Demand for underground mining equipment is expected to increase along with global demand for mineral resources that require increasingly deeper mining operations.

Komatsu developed the first TBM for rock excavation in 1963 for use in civil engineering in Japan. Since that time, the company has introduced a cumulative total of more than 2,300 TBM (including its micro tunneling machine) to the market.

Based on Komatsu’s experience in excavation, the mining TBM is equipped with new technologies that enable adaptability to small curves, reversing and passing intersections in hard rock tunnel excavation. Previously, use of TBM has generally been limited to excavating nearly straight tunnels.

This new technology improves the flexibility of the equipment and enables excavation of tunnels according to the more unique designs of each mine.

The mining TBM works by continuously performing a series of processes, such as excavating rock with disc cutters and discharging the chipped rock backwards with belt conveyors, while fortifying the excavated tunnel wall.

Excavation with disc cutters improves tunnel strength and stability by creating a circular tunnel shape with smooth walls with less damage to the excavated tunnel (compared to drilling and blasting method).

To support customers’ needs for increasingly sustainable ways of mining, the new machine runs off electricity, does not require the use of blasting and performs a series of tunnel excavation processes with a single machine, reducing the number of vehicles required overall. The result is a new excavation option that reduces the creation of greenhouse gases and particulate matter emissions for an improved underground environment that requires less ventilation than other methods. At the same time, it significantly increases the

806-745-2000

Clovis, NM

575-742-2726

Lubbock, TX

Through trial use of the new machine, Komatsu and Codelco aim to speed up the potential introduction of this innovative technology.

ROMCO EQUIPMENT CO. www.romco.com

Austin Round Rock, TX

Ft. Worth Ft. Worth, TX

512-388-2529 877-851-1026

817-626-2288 866-966-4602

Buffalo Buffalo, TX

Houston Houston, TX

903-322-5602

713-937-3005 800-865-6998

Carmine Carmine, TX

Longview Longview, TX

979-278-3570

Corpus Christi Corpus Christi, TX 361-881-4891

productivity of personnel associated with tunnel excavation work compared to conventional methods, according to the companies.

In response to climate change and the need for solutions for environmental issues, Komatsu has been focusing on the development of equipment for the future of underground hard rock mining under the slogan of “No Blasting”, “No Batch”, “No Diesel.” The mining TBM and the new method embody this forward-looking approach and seek to help customers improve safety, environmental friendliness and productivity (shorter tunnel construction period and lower tunnel construction costs) at underground mines, and also will help them achieve a revolution in their mining operations.

Per the company’s ongoing mid-term management plan “DANTOTSU Value — Together, to ‘The Next’ for sustainable growth”, Komatsu is working to expand offerings for underground hard rock mining, creating new value for customers with the development of new equipment, processes and technologies that will help operations step forward to the next stage for the workplace of the future and provide a more sustainable future for the next generation.

For more information, visit www.komatsu.com. 

903-758-5576

Rio Grande Valley Mercedes, TX 956-565-0100

Dallas Carrollton, TX

San Antonio San Antonio, TX

214-819-4100 800-227-6626

210-648-4600 800-966-4601

SIERRA MACHINERY, INC. www.sierraelpaso.com

El Paso, TX

915-772-0613

Artesia, NM

575-746-6592

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 49

HE AV Y-DDUT D Y C OMMMITMENT DEMANDS HEAVY H -DUT Y EQUIPMENT.

PACWEST MACHINERY www.PacWestMachinery.com

Kent, WA

Eugene, OR

206-762-5933

541-302-3762

Mount Vernon, WA

Spokane Valley, WA

360-588-3083

Portland, OR

503-252-5933

509-534-5933

Pasco, WA

509-534-5933

City Address City, ST 12345 123.456.7890

City Address City, ST 12345 123.456.7890 VOLVO CONSTRUCTION EQUIPMENT & SERVICES Citywww.vcesvolvo.com Address Bakersfield, CA Lakeside, CA 661-387-6090 City, ST 12345 619-441-3690 Corona, CA San Leandro, CA 123.456.7890 951-277-7620

Fresno, CA

559-834-4420

Sacramento, CA 916-504-2300

510-357-9131

Redding, CA

279-201-4869

Turlock, CA

209-410-6710

DEALER LOGO website.com

You work hard every day an nd need to get the job done right the firs st time. able and We know that your work is importtant. When it comes to machines that are rugged, relia der. Our equipment lineup will give you the capability to t tackle productive, Volvo is the market lead m every job — and an unmatched performance that allows you to spend less and earn more.

Page 50 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 51

JCB WHEEL LOADERS DESIGNED TO WORK HARD www.cisco-equipment.com 620 N. Bell Street San Angelo, TX 76903 800-496-0271 2707 Slaton Hwy Lubbock, TX 79404 806-745-9595 1706 S 1st Street Artesia, NM 88210 575-748-1314 520 SE Loop 338 Odessa, TX 79762 432-367-9181

www.ProConJCB.com 461 Pioneer Place Las Cruces, NM 88005 1-844-JCB-IRON 5050 East 58 Avenue Commerce City, CO 80022 1-844-JCB-IRON 2240 W. Buckeye Road Phoenix, AZ 85009 1-844-JCB-IRON

www.swjcb.com 2935 Lincoln Road Las Vegas, NV 89115 702-432-2200

With highly rated standard features, the JCB Wheel Loader is designed to work for you!

•

JCB CommandPlus cab for best in class operator space and comfort

•

High torque at low RPM for reduced fuel consumption and increased productivity

•

Single-piece hood design for fast access to the entire engine bay

•

JCB’s LiveLink system tracks machine efficiency, reports location and status, and delivers service alerts

/JCBNA

@JCBNA @

JCBNA www.jcb.com

Page 52 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

New Partnership...

Caterpillar Announces Multi-Year Sponsorship of Major League Soccer Caterpillar Inc. announced a multi-year sponsorship with Major League Soccer (MLS), the fastest growing sports League in North America.

With the highest percentage of millennial and multicultural fans of any U.S. sport, the sponsorship is designed to amplify the Caterpillar brand to a broader, more diverse audience in the United States and Canada and to engage with the League’s passionate fans more deeply.

“Caterpillar is eager to partner with Major League Soccer, as we share a joint commitment to being leaders in the communities where we live, work and play,” said Yvette Morrison, global director of marketing and brand of Caterpillar.

“We celebrate the people who do the work every day and are constantly looking for new ways to engage with our next generation of employees, customers and their families. This sponsorship provides a perfect opportunity for us to introduce Cat to a broader audience.”

“Caterpillar is a leading, global brand and Major League Soccer is honored to partner with a company whose values and dealer network are committed to building a better, more modern future for soccer communities across the world” said Carter Ladd, executive vice president of brand

alliances and consumer products at MLS. “Together, MLS and Caterpillar will engage long-standing customers and the most diverse fanbase in all of sports to positively impact the sport of soccer in the U.S. and Canada.”

MLS features the youngest and most diverse player pool of any of North American professional sports league with players from more than 82 countries. The sponsorship of MLS supports Caterpillar’s efforts to evolve the brand, and ensure the company is representative of the many employees and customers it serves.

As a part of the sponsorship, MLS will collaborate with Caterpillar to integrate Cat products into the soccer ecosystem. Cat dealers also will have access to exclusive soccer experiences for their operators and customers as well as their families.

Caterpillar recently collaborated with MLS in development of Cat Trials 12: No Hands, which features U.S. and International Federation of Association Football (FIFA) World Cup soccer legend, DaMarcus Beasley, teaming up with autonomous Cat equipment to make a trick shot. The Cat Trials 12 video can be viewed at http://www.cat.com/trial12. 

Ringkob Advises On How to Identify, Overcome, Fix Business Bottlenecks Jeani Ringkob founded StoryBuilt Growth Strategy & Marketing after nearly a decade in the asphalt paving business and has helped several businesses grow and develop in the construction world.

In her talk at World of Asphalt 2022, “Overcoming the Bottleneck in Your Business: How to Identify It Fast and Fix It Right, Every Time,” she explained that businesses are a lot like airplanes.

Ringkob explained in Nashville that both businesses and airplanes require constant attention, regular maintenance, periodic enhancement and dutiful repairs to keep themselves up in the air. Identifying bottlenecks in a business is just as important as identifying faults on an airplane: Failing to do so could result in a crash.

Ringkob broke the anti-bottleneck process down to three stages: 1. Identify 2. Investigate 3. Implement When it comes to identifying bottle-

necks, she said a lot of it comes down to examining decision making. Are the business’s leaders making the right decision at the right time? If not, she explains that can lead to wasted resources, missed opportunities, mediocre employees, costly mistakes…bottlenecks.

The reason inefficient decision making can lead to bottlenecks is that it can take leadership’s focus off growth, confident decision making, investment, new products, and more, and instead force leaders to focus on survival. Successful businesses focus on growth, stalled companies focus on keeping the lights on tomorrow.

Once the problem is identified, Ringkob said the next step is to investigate what has been found. Was alignment found between company, product and customer? What was found about the company’s strengths and weaknesses, and those of the competition?

What does the company’s pre-purchase, purchase, and post-purchase strategy look like? What can be done to

improve what has been found?

Whatever the investigation has found to be a potential solution to the identified bottleneck, that solution is going to need to be implemented strategically. Ringkob recommends the “O.M.E.N.” test.

• Objective: Set the result the business intends to achieve.

• Measurement: How will progress be measured?

• Evaluation: The frequency at which measurement will be reviewed.

• Nurture: How the business will tweak things as new data comes in.

Ringkob will present on “Recruiting and Retaining Top Talent at Every Level” and “Strategic Decision Making for Increased Margins” at ConExpo-Con/AGG, running March 14-18, 2023, at the Las Vegas Convention Center. ConExpoCon/AGG offers entire education tracks to help businesses “Attract, Engage & Retain Talent” and “Business Best Practices.” 

Kirby-Smith Machinery www.kirby-smith.com 6715 W. Reno Ave 3922 I-40 E Oklahoma City, OK 73127 Amarillo, TX 79103 800-375-3339 800-283-1247 4617 Powell St. McAlester, OK 74501 918-310-1550

3419 E Slaton Rd. Lubbock, TX 79404 866-289-6087

12321 E. Pine St. Tulsa, OK 74116 800-375-3733

7301 E Interstate 20 E Odessa, TX 79765 877-794-1800

12035 Interstate 20 W Abilene, TX 79601 877-577-5729

415 Enterprise Blvd.

Waco (Hewitt), TX 76643 254-261-1370

Tri-West Tractor, Inc. www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94551 925-455-8200

Ditch Witch of East Texas www.witchequipment.net 7717 Highway 69 Tyler, TX 75706 903-592-6226

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 53

EquipmentShare

Garton Tractor Inc.

www.equipmentshare.com

www.gartontractor.com

295 S Redwood Rd North Salt Lake, UT 84054 385-308-5516

4088 Russell Road Fairfield, CA 94534 707-425-9545

2590 Main Street Chula Vista, CA 91911 619-510-6825

Santa Rosa, CA 707-586-1790

412 E Gowan Road North Las Vegas, NV 89032 725-221-0051

Ukiah, CA 95482 707-468-5880

Power MotiveCorporation www.powermotivecorp.com DENVER HEADQUARTERS 5000 Vasquez Blvd.

Denver, CO 80216 303-355-5900

Durango 970-259-0455

Colorado Springs 719-576-5541

Cheyenne 307-634-5149

Grand Junction 970-241-1550

Milliken 970-587-1188

Nueces Power Equipment www.nuecespower.com 4697 FM 1516 N Converse, TX 78109 210-310-0066 7667 N Sam Houston Pkwy Humble, TX 77396 713-247-0066

Page 54 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

JUST BUILT BETTER.

From small landscaping projects and residential construction jobs to acres

ASV TRACK LOADERS & SKID STEERS

places and in more conditions so you can get more done every day.

of excavation, ASV’s all-terrain machines enable you to work in more

DISCOVER THE ASV LINE-UP OF TRACK LOADERS AND SKID STEERS AT

CLM Equipment Co. Inc.

Jet City Equipment

ROMCO Power Systems

www.clmequipment.com

www.jetcityequipment.com

www.romco.com

3135 US Hwy 90 East Broussard, LA 70518 337-837-6693

Dallas (Carrollton), TX 214-819-4100

Ft. Worth, TX 817-626-2288

4851 E Napoleon Road Sulphur, LA 70663 337-625-5942

33345 SR20 Oak Harbor, WA 98277 360-675-4441 10219 State Avenue Marysville, WA 98271 360-651-9079

Austin, TX 512-388-2529

Longview, TX 903-758-5576

Buffalo, TX 903-322-5602

Mercedes, TX 956-565-0100

2815 N Sam Houston Pkwy E Houston, TX 77032 281-598-2500

2713 Euclid Avenue Wenatchee, WA 98801 509-888-8181

Carmine, TX 979-278-3570

San Antonio, TX 210-648-4600

Corpus Christi, TX 361-881-4891

Stephenville, TX 817-626-2288

Volvo Construction Equipment & Services www.vcesvolvo.com

© 2022 ASV Holdings, Inc. For more information, visit ASVI.COM.

Bakersfield Bakersfield, CA 661-387-6090

San Diego Lakeside, CA 619-441-3690

Corona Corona, CA 951-277-7620

San Leandro San Leandro, CA 510-357-9131

Fresno Fresno, CA 559-834-4420

Turlock Turlock, CA 209-410-6710

Sacramento Sacramento, CA 916-504-2300

Redding Redding, CA 279-201-4869

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 55

www.cpower.com 9200 Liberty Drive Liberty, MO 64068 816-781-8070 Wichita, KS 316-943-1231 Great Bend, KS 620-792-1361 Liberal, KS 620-624-7274 Woodward, OK 580-256-6014 Salina, KS 785-825-8291 Colby, KS 785-462-8211

Springfield, MO 417-865-0505 Joplin, MO 417-726-5373 Riverside, MO 816-415-6787 Wichita, KS 316-789-7370 Yukon, OK 405-324-2330 Maryland Heights, MO 314-427-4911 Liberty, MO 806-415-6700 Tulsa, OK 918-984-6565

Glenn B. Dorning www.gbdorning.com 1744 E. Holt Blvd.

Ontario, CA 91761 909-983-2089

Mechanical & Irrigation Solutions, Inc. misisthebest.com 3199 E Onstott Road Yuba City, CA 95991 530-674-7030

Page 56 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Women in Construction Beth Bartow’s Lifelong Career Spans Decades, Two Continents

By Patricia O’Brien

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENT

CEG CORRESPONDENT

www.oklahomaterritoryequipment.com

Beth Bartow grew up in the heavy equipment industry, while the industry grew and changed around her. Currently the Case business manager southeast of Case Construction, Bartow’s first job in high school, unbeknownst to her, would be the start of a lifelong career that would span decades and several countries around the globe.

“I started working for Hoffman Equipment, in Piscataway, N.J., when I was in high school. It’s a family-owned business. I started filling in during school vacations. They asked if I wanted to come on board and work in sales. The people were super, and it was an interesting business. My education really started there,” said Bartow, whose first role in inside sales gave her the opportunity to learn the whole business, including accounting, parts and service.

Bartow stayed with the Hoffman family for several years.

But just like living at home, there comes a time when you need to leave the nest. She was offered a position with Daewoo Equipment as an inside sales manager and accepted this new challenge.

“I learned so much working there,” she said. “I was there for a few years. They were moving their offices to Atlanta, and I didn’t want to move there, so I went back to Hoffman as a territory sales manager covering Staten Island and surrounding counties. You can always go back home again.”

A woman in the role of territory sales manager was unusual in the mid 1980s, particularly in the New York City metropolitan area.

“Being a woman territory sales manager was innovative and not something you saw out there a lot, especially in New York and New Jersey,” she said. “I was there for a period of time, got some great sales experience, and then it was time to go.”

Over the next several years, Bartow held a variety of field sales roles for some heavy hitters in the industry, including H.O. Penn in Connecticut and ALLU Manufacturing in New Jersey. Her big break came when a headhunter working on behalf of Caterpillar Redistribution Services contacted her to discuss filling the role of senior sales regional manager, working out of Florida. She accepted the job and headed south, successfully growing Caterpillar’s used equipment and rental business.

Three years later, Bartow answered a call from Cat’s European group to replicate that success in Europe.

“In 2007, I got an expat role based in England with northern Europe as my territory,” she said. “My role was to get in there and help build their redistribution, evaluate used equipment sales, propose new ideas and evaluate the used equipment managers at these European companies.”

Her work meant traveling throughout England, the Netherlands, Sweden, Denmark, Finland, Latvia and Ireland.

“What was interesting was here I was this ‘pushy American woman’ coming in and telling these men how to run their used equipment business,” she recalled. “To this day, I’m thankful to Cat for that experience. It helped me grow as a person and as a businesswoman. It was an experience that you don’t get every day.”

After two years in this role, Bartow returned to the United States. She held senior sales manager roles with Cat’s used equipment division, Terex and Volvo. She then took her vast experience in the construction equipment industry to soft-

Oklahoma City, OK 405-917-9191 Tulsa, OK 918-835-7200

Garton Tractor Inc. www.gartontractor.com 2400 N Golden State Blvd. • Turlock, CA 95382 209-632-3931 Fairfield, CA • 707-425-9545 Merced, CA • 209-726-4600 Modesto, CA 95356 • 209-538-0911 Newman, CA • 209-862-3760 Santa Rosa, CA • 707-586-1790 Stockton, CA 95206 • 209-948-5401 Tulare, CA 93274 • 559-686-0054 Ukiah, CA 95482 • 707-468-5880

Photo courtesy of Beth Bartow

Beth Bartow is the Case Construction southeast business manager.

ware manufacturer Decisiv Inc. as director of business development. She was there for five years before an opportunity opened with Case as dealer development manager.

“I started with Case in September 2021. They had a reorganization with the purpose of becoming more customerfacing. In March of this year, I was asked to take over the role as the Case business manager, southeast,” said Bartow, the only female field regional business manager in the company.

As business manager, she covers the Case dealers from Florida to North Carolina.

Bartow’s success has not come easy and certainly not without its challenges, but she’s happy with the path she chose.

“I wouldn’t change it for anything. I never thought I would get into construction. I thought I was going into retail and fashion. Construction was easy; it was like being home.

It felt comfortable. This is what I know. Each move I made was a platform to the next.

“Everywhere I go, I have to prove myself to somebody,” she added. “I don’t see men having to prove themselves when they come into the field. One of the best pieces of advice I got early in the industry is to just be a sponge and soak up everything, so that’s what I did. The thing I’ve found in my travels is that there are people who will help you along the path and I’ve been very fortunate to have some very good managers to help me.”

Bartow will gladly offer advice to women looking to break into the construction industry, but her most important piece of advice comes before a decision is made.

“Interview, interview, interview. Make sure you’re going to be the right fit for that location. They will dazzle you with an offer, but see where the opportunities are for growth.

You’re not going to want to stay in that position for the rest of your life. Are they providing the tools to help you grow?

Then that’s the place you want to be.”  CEG

CLM EQUIPMENT CO. INC. www.clmequipment.com Lafayette, LA 337-837-6693 Lake Charles, LA 337-625-5942 Houston, TX 281-598-2500

BANE MACHINERY INC. www.banemachinery.com Dallas, TX 800-594-2263 Ft. Worth, TX 800-601-2263 Tyler, TX 800-594-2200

COLUMBIA WESTERN MACHINERY Columbiawesternmachinery.com 11125 SW Tonquin Road Sherwood, OR 97140 503-454-0902

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 57

Cooper Equipment Co. www.cooperequip.com 201 Commerce Blvd.

Georgetown, TX 78626 512-930-5151

TRI-WEST TRACTOR, INC. www.tri-westtractor.com 6281 Southfront Road Livermore, CA 94551 925-455-8200

Westrax Machinery www.westraxmachinery.net 19618 S. Susana Rd. Rancho Dominguez, CA 90221 800-411-4717

Shafer Equipment Company, Inc. www.shaferequipmentco.com 955 Greg Street • Sparks, NV 89431 775-235-4069

19885 Temescal Canyon Rd Corona, CA 92881 800-411-4717

APCO EQUIPMENT www.apcoequipment.com 3432 N 5th Street North Las Vegas, NV 89032 800-574-4089

BEARD EQUIPMENT CO. www.beardequipco.com 4509 I-20 Midland, TX 79706 432-694-4530

611 N. Golden Key St. Gilbert, AZ 85233 602-397-8173

Rasmussen Equipment Co. www.raseq.com 3333 West 2100 South West Valley City, UT 84119 801-972-5588

Page 58 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

TOUGH TASKS SEEM SMALL FROM HERE. The G-Series Skid Steers and Compact Track Loader are majorly tough customers, because tough customers like you helped design them. With your input, we were able to push the limits of durability, engine power, and fuel capacity in all the ways our customers need. And with fewer grease zerks and extended oil-change intervals compared to earlier models, servicing is even simpler than before. Available in three models, including a radial-lift machine, the G-Series can take down the biggest jobs — and your operating costs — all at the same time. To learn more, call or visit us today.

HONNEN EQUIPMENT CO.

DOGGETT HEAVY MACHINERY SERVICES

www.honnen.com

www.doggett.com

Denver, CO 303-287-7506 800-646-6636 Durango, CO 970-247-4460 Grand Junction, CO 970-243-7090 Ogden, UT 801-627-0049

Salt Lake City, UT 801-262-7441

Gillette, WY 307-685-4288

St. George, UT 435-652-8003

Rock Springs, WY 307-382-5284

Casper, WY 307-266-4474

Idaho Falls, ID 208-523-9915

Cheyenne, WY 307-316-9800

9111 North Freeway Houston, TX 77037 713-679-6700 Beaumont, TX 409-842-1754 Bryan, TX 979-823-1905 Corpus Christi, TX 361-289-0727

San Juan, TX 956-787-0001

Broussard, LA 337-837-9481

Monroe, LA 318-343-8787

Victoria, TX 361-570-6666

Covington, LA 985-893-3005

Shreveport, LA 318-631-3090

Alexandria, LA 318-442-0455

Longview, TX 903-758-3326

St. Rose, LA 504-466-5577

Baton Rouge, LA 225-291-3750

Lufkin, TX 936-634-8801

Tyler, TX 903-592-8900

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 59

NED - Texas

Porter Group USA

Orion Equipment

Formerly Four Seasons Equipment

13013 Temescal Canyon Rd. Corona, CA 92883 951-674-9999 9879 San Fernando Rd. Pacoima, CA 91331 818-834-0102 www.portergroupusa.com

18060 Des Moines Memorial Drive Seattle, WA 98148 800-280-8124 www.orion-equip.com

Houston, TX 800-234-5007 • 281-807-9777 Dallas, TX 866-270-1700 • 214-388-1700 www.nedealers.com

Page 60 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Generac Offers Dust Fighting Solution Dust suppression is becoming increasingly important across the demolition industry.

Common demolition practices, such as implosions and concrete crushing, send massive amounts of harmful dust particles into the atmosphere. Dust suppression cannons are one of the best ways to combat this hazard.

Midsize dust suppression cannons offer the best all-around support because they can control dust on small or large job sites. C.W. Machine Worx (WORX) offers Generac’s Dust Fighter 15000 and 20000 through its dealer, Company Wrench.

The DF 15000 and DF 20000 are two of the most cost-effective midsize dust suppression machines on the market and have a number of unique features and safety benefits, according to the company.

Health, Safety Benefits The Dust Fighters emit atomized water to remove dust particles from the atmosphere, bringing them safely back to the ground. This reduces short and long-term health concerns for workers and nearby residents.

The DF 15000 and DF 20000 also helps conThe Dust Fighters emit atomized water to remove dust particles tractors comply with OSHA regulations regardfrom the atmosphere, bringing them safely back to the ground. ing silica dust.

This reduces short and long-term health concerns for workers and nearby residents.

Specifications, Features Each unit features a userfriendly control panel for easy monitoring of pressure, temperature and flow levels.

Both machines also come standard with an integrated The Easy Way To Advertise Your Equipment booster for better control of Run In Two Consecutive Issues – Black & White $135 • Color $195 water pressure and flow rate.

The base models of the DF 15000 and DF 20000 are impressive machines in their own right. However, when paired with a trailer and generator, the mobile dust fighting capabilities are endless, according to the manufacturer. This mobile dust suppression package also features Portable Modular Conveyor-Material Placer SEVERE SERVICE ASPHALT CUTTERS automatic oscillation and a Really Works! It will really save you money!

(15 Models Available) Starting @ $1450.00 remote control when conJust attach it to your Loader www.attachmentsintl.com Call Mike 248-795-3000 mike@materialplacer.com attintl@loretel.net or stant change of direction is www.materialplacer.com Call Us @ (218) 863-6444 15-16 EB 15-16 AP required.

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $135 per ad, $60 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices!

Call Company Wrench for Sizes & Pricing Call 866-294-6103 15-16 EB

Best Value This mobile dust suppression package offers one of the best values in the demolition industry, according to the company. Customers benefit from low costs, safer job sites and expert dealer support.

For more information, visit www.cwmachineworx.com and www.companywrench.com. 

CISCO EQUIPMENT www.cisco-equipment.com 1706 South 1st Street, Artesia, NM 88210 575-748-1314 Odessa, TX • 432-550-9181 Lubbock, TX • 806-745-9595 San Angelo, TX • 325-653-2121

NED - TEXAS (Formerly Four Seasons Equipment) www.NEDealers.com Houston, TX • 800-234-5007 Dallas TX • 866-270-1700

NUECES POWER EQUIPMENT www.nuecespower.com 7510 IH-37 Access Rd., Corpus Christi, TX 78409 361-289-0066 Laredo, TX • 956-725-0066 San Antonio, TX • 210-310-0066 San Benito, TX • 956-361-0066 Victoria, TX • 361-576-0066 El Paso, TX • 915-541-0066

PORTER GROUP USA www.portergroupusa.com 13013 Temescal Canyon Rd, Corona, CA 92883 951-674-9999 Pacoima, CA • 818-834-0102 Newark, CA • 510-713-7368

MECOM EQUIPMENT www.mecomequipment.com 4546 N Wilson Way, Stockton, CA 95205 209-466-5135

JET CITY EQUIPMENT www.jetcityequipment.com 33345 SR 20, Oak Harbor, WA • 360-675-4441 Marysville, WA • 360-651-9079 Wenatchee, WA • 509-888-8181

R & S INDUSTRIES, INC. www.rsindinc.com 951 CR G, Clovis, NM 88101 575-769-8659

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 61

Get an “A” with Hyundai Hyundai Construction Equipment is excited to announce the launching of our new A-series machines. Along with a new look, these machines are packed full of standard new features and benefits to get the job done efficiently.

• Cummins Performance Series Engines Stage V emissions compliant engines • EPFC (Electric Positive Flow Control) Reduces daily fuel consumption by 8-11% • EPIC (Electric Pump Independent Control) Improved controllability with reduced RPM drop • Serviceability/Safety Enhanced cab visibility Easy access engine panels

More standard features. More value.

www.hceamericas.com To learn more about the what the new Hyundai A-Series machines can offer your business, contact your Hyundai dealer today.

Hyundai Heavy & Medium Construction Equipment #032119-HCE ©2022 Hyundai Construction Equipment Americas. All Rights Reserved.

Page 62 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

B&W Utilize Unique Concrete On 130-Year-Old Canal CANAL from page 1

The work to improve the canal was essential.

The project features construction of approximately 11.50 mi. of concrete lined canal, structures, concrete pipes and other appurtenances. The existing Florence Canal Reach 2 includes an existing earthen canal with flow control structures and equipment, turnout structures and pipes, road crossings, wells, utilities and other features.

“These upgrades are needed to update the aging structures, improve the hydraulic efficiency of the system and minimize canal system water losses,” said Shane Lindstrom, general manager of SCIDD. “This 130-year old earthen canal will be concrete-lined, with five new check structures, 27 turnouts and modern electronic and manual flow measurement.

Project Scope The project consists of many obstacles. B&W is responsible for site clearing, the removal of existing canal structures such as canal gates and the removal and salvage of select canal gates and the removal and legal disposal of various features coated with lead based paint.

The project features canal excavation, compacted embankment and embankment construction, soil blending, trench excavation and backfill, riprap with geotextile fabric, cleaning and stockpiling of riprap for reuse, the building of reinforced concrete structures, canal trimming, concrete lining with fibrous reinforcing that includes hand placed concrete lining with fibrous reinforcing; and the installation of reinforced concrete pipe along with 78-in. and 54-in. concrete siphon pipe extensions; and other mechanical work.

To date, Brosamer & Wall has completed all the canal excavation, paving and lining, installation of all the substructure and turnouts, as well as the gates and radio gates.

“There is one structure left where have to install gates and we need to install all the electrical and solar equipment,” said Gonzalez. “Next season we’ll start doing the road crossings, which [brings] everything together.

“We started at the end of the project and worked our way to the beginning in the first season, which started in late August 2020 and went to January 2021,” Gonzalez added.

“We covered six miles. Then we went to the beginning because there was some land acquisition and utilities to be moved in middle part of the project. We went downstream from April to May, paving all of it. In August 2021 we were working in the middle and completed all the paving last January.”

It took approximately three days for the concrete to cure and gain strength. The concrete lining is 4 in. thick.

Jayco, a subcontractor, performed the earthwork “They kept ahead of the canal trimming and lining,” said Gonzalez. “In one segment of the project we installed a water bypass to allow the earthwork to start eight weeks before the scheduled dry up period. Once you build a canal, you have to start the trimming process no more than two days before you pave. That is where you go with the trimmer and shave about six inches.”

While this was Gonzalez’s first canal project, he was surrounded by many with a wealth of experience.

“Our owner, Bob Brosamer, has been building canals for more than 30 years,” said Gonzalez. “John Pologar, our project manager, this will be his eighth canal project. Our superintendents, Mike Newman and Jack Beale, have more than 20 years of experience. Basically everyone on the project had a lot of canal experience.”

The project features canal excavation, compacted embankment and embankment construction, soil blending, trench excavation and backfill and more.

Precast concrete elements were utilized, including those for the turnout structures, which were supplied by Jensen Precast .

“The turnout structure was five to seven days to build,” said Gonzalez. “The curing took a few days and then they were transported in two, top and base.”

The structures were set in using a 250 ton hydro crane, which was supplied by Marco Crane and Rigging Company.

Reinforced concrete pipes were required for the turnouts — 36-in. and 24-in. — which were manufactured by Forterra, a local supplier.

Also installed were steel pipes at well discharges and 54in. and 78-in. reinforced concrete low head pressure pipe.

The lining of the canal required approximately 29,000 cu. yds. of concrete.

“On average, we were doing about 3,000 linear feet a day and on a good day, about 5,000 linear feet,” said Gonzalez.

“The check structures were built before or at the same time as the paving. In two areas the check structures were already

built, so as we paved up, we used a crane to jump each piece of paving equipment. We would be able to jump all the equipment and start back up within two hours, usually we would make this day our short day and resume the next day.”

The jumping required coordination to move the equipment to the other side. Hunter Contracting was responsible for all the cast in place structures, which was approximately 6,000 cy. yds.

Equipment in these operations consisted of a Case 621B loader and a Cat 302D excavator. The excavation operations has crews using excavators, a 14G Cat motor grader, a 289 Cat skid steer and a Cat D6 dozer.

Peak days had 50 to 60 people on-site. The major subcontractors are Hunter Contracting for major concrete structures, Ludvik for electrical, Western Technology for quality control, D2 for surveying, DEG for concrete structures, Harris for rebar and Municipal Treatment for all the gates.

“The soil did not affect the equipment,” said Gonzalez. see CANAL page 65

This major initiative has B&W crews excavating approximately 300,000 cu. yds. of earth and rock and installing approximately 25,000 cu. yds. of concrete lining.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 63

Attention Contractors!

Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items. If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted-to-buy and enter your listings. Inappropriate or Sale Ads will be Deleted WANTED (US): HITACHI EX450LC 5 EXCAVATORS – NEED TO BUY HITACHI EXCAVATOR (DIGGERS) 450, 400, 270, 300, 200 SIZE. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): DOOSAN DX480 EXCAVATORS - WANTED TO BUY USED DOOSAN EXCAVATORS DX480 - DX520 4000-5000HRS. EMAIL: AMERICAUSEDEQUIPMENT@ GMAIL.COM; PHONE: +1-657-236-7399 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR CAT D10N / D10R CRAWLER DOZER. EMAIL: USEDEQUIPMENTSOURCING@ GMAIL.COM; PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX220 EXCAVATORS – WANT TO BUY USED HITACHI EXCAVATORS EX-220, EX-270, EX-400, AND EX450, ANY CONDITION. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 936 WHEEL LOADERS – NEED TO BUY CAT USED WHEEL LOADER 916,926,936,950B/E,966E/D/F, 970F, 980C AND 980F. IF ANY OF THEM AVAILABLE, PLEASE EMAIL US. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX400LC EXCAVATORS - NEED TO LOCATE HITACHI EXCAVATORS EX270, EX-300, EX-400, AND EX-450.

EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX450 EXCAVATORS - LOOKING TO BUY OLD USED HITACHI EX 450 EXCAVATORS. EMAIL: IKRAMKHAN@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX450 EXCAVATORS - NEED TO BUY HITACHI, JOHN DEERE, KOMATSU 300, 400, AND 450 SIZES EXCAVATORS. OFFER ME RUNNING OR NON-RUNNING EXCAVATORS. EMAIL: USEDEQUIPMENTSOURCING@GMAIL.COM PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): LOOKING TO BUY HITACHI EXCAVATORS EX330LC-5, EX450LC-5, EX400LC AND JOHN DEERE 495D, 595D. EMAIL: INFO@IUKANDCO.COM; PHONE: +923331234598 –––––––––––––––––––––––––––––––– WANTED (US): KUBOTA B7300HSD TRACTOR WITH 60 INCH MOWER DECK. EMAIL: PRONCALLO@AOL.COM; PHONE: 845-225-7504 –––––––––––––––––––––––––––––––– WANTED (US): ACS INDUSTRIES – BUCKETS, ALL MODELS EMAIL: BEBOMOR2003@YAHOO.COM ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): KOMATSU WA30-2 WHEEL LOADER - LOOKING TO BUY A REAR AXLE FOR A KOMATSU WA30-2. IF YOU HAVE A REAR AXLE PLEASE CONTACT ME @ 6I6/8I3/3642.

ALSO INTERESTED IN BUYING COMPLETE RUNNING KOMATSU LOADERS WA40 OR SMALLER. EMAIL:CRAIGBERENS944@GMAIL.COM PHONE: 6I6-813-3642 –––––––––––––––––––––––––––––––– MANUFACTURER: MEC 3391RT AERIAL LIFT - CONTROL BOX FOR A MEC 3391RT YEAR 2000 PART NO. 20783.

DOUBLE FUEL GAS/PROPANE. NO OUTRIGGER. EMAIL: TAVAKE08@ICLOUD.COM; PHONE: 415-748-8079 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS - NEED CATERPILLAR WHEEL LOADERS 950B, 950E, 966F, 966FII, 980F AND CATERPILAR MOTOR GRADERS 140G. EMAIL: NAQIB_KHAN73@YAHOO.COM; PHONE: +923333298751 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS, ALL MODELS - LOOKING TO BUY HITACHI EXCAVATORS EX270LC,EX330LC-5, EX450LC-5, EX400LC AND JOHN DEERE 495D, 595D. EMAIL: NAQIB_KHANINTRCO@HOTMAIL.COM; PHONE: +923332316587 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 966F WHEEL LOADERS – NEED TO BUY USED CAT WHEEL LOADERS 966F, 966-F-II, 980C, AND CAT 970F. EMAIL: AHMED@IUKANDCO.COM; PHONE: +923003695360 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CONCRETE PUMPS: SCHWING, PUTZMEISTER, ALLIANCE, ELBA, CONCORD, PUMPSTAR, ETC. ALL MODELS, BRANDS, & SIZES, OLD OR NEW! BOOM PUMPS, TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD, RETIRED, NO LONGER USED AND PARTS & PUMPS NEEDING REPAIRS. INSTANT PAYMENT GUARANTEED. EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 140G MOTOR GRADERS – CAT USED MOTOR GRADER 140G AND 140H FOR OWN STOCK. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX330-5 EXCAVATORS – WE ARE LOOKING TO BUY A COUPLE OF UNITS OF HITACHI EXCAVATORS EX 330-5 & EX 450-5. IF YOU HAVE ANY OF THEM AVAILABLE, PLEASE LET ME KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 988B WHEEL LOADER– WE NEED TO BUY A CAT USED WHEEL LOADER 936, 988B/F & 950B. IF YOU HAVE AVAILABLE, PLEASE LET US KNOW. EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.COM ––––––––––––––––––––––––––––––––

WANTED (US): JOHN DEERE 992D EXCAVATORS – NEED TO LOCATE JOHN DEERE'S EXCAVATORS SIZES 190E, 200, 210, 230, 270, 300, 400.

EMAIL: USEDEQUIPMENTS TRADINGLLC@GMAIL.COM PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): EZ SCREEN 1200XLS SCREENING – ANYTHING THAT WOULD BE LIKE A 1200 OR1200 XLS. EMAIL: MAIERLANDSCAPING@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR BACKHOE LOADERS, ALL MODELS – NEED TO BUY USED CAT WHEEL LOADERS, BACKHOES, EXCAVATORS, HIGHWAY TRUCK. EMAIL: SEARCHT930@GMAIL.COM PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED: CHAINS AND SPROCKETS FOR KOBELCO 400IV OR 480 EXCAVATOR, NEW OR USED. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 –––––––––––––––––––––––––––––––– WANTED: BUCKET FOR JOHN DEERE 644H WITH CUTTING EDGE OR TEETH 4.25 YARD. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 –––––––––––––––––––––––––––––––– WANTED (PA): JOHN DEERE BUCKETS, ALL MODELS; LOOKING FOR BUCKET FOR JOHN DEERE 644H WITH CUTTING EDGE OR TEETH 4.25 YARD. EMAIL: FJS-1@ATT.NET PHONE: 724-535-7722 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR DUMP TRUCKS - CAT 725-745'S 10,000 HOURS OR LESS, WILL BUY IN GROUPS. EMAIL: ANDREWL@BLACKSTARACA.COM; PHONE: 312-898-5355 –––––––––––––––––––––––––––––––– WANTED (US); TEREX BUCKET TRUCKS, ALL MODELS - 55 FT & 60 FT 4-5 YEARS OLD, PREFERABLY PREFER TEREX 5TC-55 & ALTEC AA55E PREFER FREIGHTLINER CHASSIS. EMAIL: ZACHZ@BLACKSTARACA.COM; PHONE: 815-575-6797 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 916 WHEEL LOADERS; RUNNING OR NONRUNNING UNITS REQUIRED. EMAIL: IMPERIALMACHINERYTRADER@GMAIL.COM; PHONE: 281-694-5478 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 966F II WHEEL LOADERS EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (NJ): CASE BACKHOE LOADERS: 580SK, 580L, 580SL, 580LII, 580SLII, 580M, 580MII, 580MIII, 580SM, 580SM+, 580SMII, 580SMIII, 580N EP, 580N, 580SN, 580SN WT EMAIL: FRANKHORAN@ GROFFTRACTOR.COM PHONE: 800-654-USED ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): CATERPILLAR MOTOR GRADERS, ALL MODELS LOOKING TO BUY USED CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H AND 14M. PLEASE SEND ME A PICTURE WITH DETAIL ANDASKING PRICE. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 916 WHEEL LOADERS - URGENTLY NEED CAT 916, 926, 966F AND 970F WHEEL LOADER, ALSO HITACHI EXCAVATORS EX 270, EX 400 AND 450.

EMAIL: IUKANDCO@GMAIL.COM; PHONE: +923335555360 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS, ALL MODELS; WE ARE INTERESTED IN BUYING HITACHI EXCAVATORS (DIGGERS) 450, 400, 270, 300, 200 SIZE. EMAIL: NORTHHEAVYEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): INTERNATIONAL MODEL FUEL / LUBE TRUCKS, ALL MODELS. LOOKING FOR 1 OR 2 FUEL TRUCKS. THEY WOULD NEED TO BE: AUTOMATIC TRANSMISSION -DECENT MILES, ENGINE HOURS -PREFERABLY MULTIPLE COMPARTMENTS -PREFERABLY INTERNATIONAL, BUT NOT A MUST -NO DPF, OR MAXXFORCE ENGINES. MAXIMUM $40,000 TO AS CHEAP AS POSSIBLE. THANK YOU. EMAIL: MANAGER@ COMMERCIALFLEETSUPPLY.COM; PHONE: 347-489-4474 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR WHEEL LOADERS, ALL MODELS. WE NEED TO BUY CAT USED WHEEL LOADER 916,926,936,950B/E,966E/D/F, 970F, 980C,980F ALSO CAT MOTOR GRADERS 140G,12G/H, 14G/H, 140H, AND 14M. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW THANKS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): HITACHI EX450 LC-5 EXCAVATORS. WE ARE LOOKING FOR USED HEAVY CONSTRUCTION MACHINES. PLEASE OFFER US FOLLOWING MENTION MACHINES & EMAIL US DETAILS WITH PICTURES CATERPILLAR MOTOR GRADERS 140G CATERPILLAR WHEEL LOADERS 950B, 950E, 966E, 966F, 966FII, 970F, 980F HITACHI EXCAVATORS EX200, EX200LC, EX270LC, EX400, EX400LC, EX300LC, EX330LC-5, EX450LC-5, EX400-5, EX60WD, EX100WD. JOHN DEERE 495D, 595D. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM PHONE: +923332316587 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR 950B WHEEL LOADERS - LOOKING TO BUY CAT WHEEL LOADERS 950B, 950E, 966E, 966F, 966F II, 970F, 980F. EMAIL: NAQIB_KHAN73@YAHOO.COM PHONE: +923333298751 ––––––––––––––––––––––––––––––––

WANTED (US): CATERPILLAR EXCAVATORS, ALL MODELS; LOOKING FOR SEVERAL CAT 330DL, 336DL, 336EL EXCAVATORS UNDER 10,000 HOURS AND WHOLESALE PRICED. EMAIL: LJEQUIPMENT3@GMAIL.COM; PHONE: 1-3309873508 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EXCAVATORS, ALL MODELS; LOOKING FOR OLDER HITACHI EXCAVATORS AND CAT WHEEL LOADERS, IN GOOD RUNNING CONDITION OR NON-RUNNING MACHINES. EMAIL US TO DISCUSS. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS HITACHI EXCAVATORS – WE NEED TO BUY HITACHI EXCAVATORS ZX 200-1, ZX 330, ZX 450, ZX 650, ZX 850 EX 270-1, EX 300-1, EX 400-1 AND EX 450-5.

ALSO KOMATSU EXCAVATORS PC400, KOMATSU PC 450-6, KOMATSU PC 7506. IF ANY OF THEM ARE AVAILABLE PLEASE LET US KNOW, THANKS. EMAIL: EDDIE.SIDDIQUI3@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS KOMATSU WHEEL LOADERS - WE NEED TO BUY KOMATSU WHEEL LOADER WA600-3, WA-600-6, WA-30, WA-40, WA 50.

IF YOU HAVE AVAILABLE, PLEASE LET US KNOW. EMAIL: IKCEQUIPMENTS@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 972H WHEEL LOADER. EMAIL: PONTO2002EG@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (NE): ALL MODELS ATLAS COPCO BREAKERS / HAMMERS. EMAIL: JAKE.SMITH41@YAHOO.COM; PHONE: 402-350-3280 –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS WAIN ROY BUCKETS - LOOKING FOR 24", 30" OR 36" BACKHOE BUCKETS. I HAVE A CATERPILLAR 420D EQUIPPED WITH THE ONE PIN CATERPILLAR QUICK EXCHANGE SYSTEM. CATERPILLAR, WAIN-ROY OR SIMILAR BUCKETS WOULD BE FINE. THE CLOSER TO SOUTHWEST FLORIDA, THE BETTER, BUCKET WILL NEED TO BE SHIPPED. PLEASE SEND PHOTOS AND PRICES. THANKS IN ADVANCE. EMAIL: TWOPETIES@AOL.COM; PHONE: 239-440-4254 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS HITACHI EXCAVATORS - LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: ELROYFITZGERALDSALES@ GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (MD): KOMATSU ANY KOMATSU PC100-5,120-5,150-5,200-5,220-5,3005 EXCAVATOR EMAIL: MIKE@3MEQUIPMENT.COM; PHONE: 240-910-0877 ––––––––––––––––––––––––––––––––

WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATOR EX200, EX200LC, EX270LC, EX330LC-5, EX400LC, EX450LC-5. OFFER AVAILABLE EQUIPMENT AND GOOD PRICE. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): ALL MODELS VERMEER TRENCHING / BORING / CABLE PLOWS - M495 VERMEER VIBRATORY PLOW. NEED WHOLE MACHINE WHETHER IT RUNS OR FOR PARTS. EMAIL: JOHN@PIONEERTREE.COM; PHONE: 612-860-5327 –––––––––––––––––––––––––––––––– WANTED (US): HITACHI EX270LC EXCAVATOR. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +923322489350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR 988F WHEEL LOADER; USED CATERPILLAR 988F, IDEALLY MANUFACTURED IN YEARS 1993-1995 AND IN WORKING CONDITION. EMAIL: BRIAN@CANDEVINC.COM –––––––––––––––––––––––––––––––– WANTED (US): WE ARE LOOKING TO BUY ANY USED CONSTRUCTION EQUIPMENT IN ANY CONDITION (RUNNING GOOD, DOESN’T WORK, HAVE AN ISSUE, HIGH HOURS, ROUGH SHAPE, DISMANTLED MACHINE) LIKE (WHEEL LOADERS, CRAWLER LOADERS, DOZERS, EXCAVATORS, MOTOR GRADERS, LOADER BACKHOES AND SKID STEERS). ALSO WE BUY OLD CAT MACHINES. EMAIL: GCESMARKETING8@GMAIL.COM; PHONE: 657-236-7399 –––––––––––––––––––––––––––––––– WANTED (US): CASE 1150E CRAWLER DOZER, MUST HAVE WINCH AND POSSIBLY BRUSH RAKE. EMAIL: MTRAY10@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): A FRONT BUCKET SINGLE DUMP CYLINDER FOR A JOHN DEERE 415B LOADER/BACKHOE..

MACHINE SERIAL NUMBER 004286…JD PART NUMBER RE13064..SAME PISTON AS A 410.

EMAIL: DEANDRS@VERIZON.NET; PHONE: 610-417-5123 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): NEED FOLLOWING CAT WHEEL LOADERS: 950B, 950E, 966E, 966F, 966FII, 970F, 980F. OFFER AT GOOD PRICE. EMAIL: HIDAYATMASOOD@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): LOOKING TO BUY HITACHI EXCAVATORS EX200, EX270, EX270LC, EX400LC, EX450LC-5.

EMAIL: FAIZKHAN0316@GMAIL.COM; PHONE: +923332925103 ––––––––––––––––––––––––––––––––

Page 64 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944

AUCTIONS INTERNATIONAL www.auctionsinternational.com 800-536-1401

• Syracuse, NY Thurs., August 4, 2022 For: Empire Farm Days

• Online Auctions July 11 – August 26, 2022

• Youngstown, OH Sat., August 6, 2022 For: Liquidation. Paving, Trucking & Construction Equipment

BAR NONE AUCTION www.barnoneauction.com 866-372-1700

• Timed Online August 10 - 17, 2022 For: Large Quantity of Support Equipment & more • Long Island, NY Fri., August 12, 2022 For: Snow & Construction Equipment & more

• Live Online Sat., August 13, 2022 For: Sacramento, CA Monthly Public Auction • Live Online Fri., August 26, 2022 For: Woodburn, OR Monthly Public Auction

• Houston, TX • Live Online Thurs., August 18, 2022 For: Bankrupt Sale. Late Model Sat., September 10, 2022 Construction Equipment & more For: Sacramento, CA Monthly Public Auction • Troy, VA Thurs., August 25, 2022 • Live Online For: 1 Owner, Late Model Cat & Fri., September 30, 2022 Mack Equipment & more For: Woodburn, OR Monthly • Newark, NJ Public Auction Sat., August 27, 2022 For: Snow Equipment & Snow Trucks & more BIDADOO AUCTIONS • Las Vegas, NV www.bidadoo.com Sat., September 10, 2022 1-877-BIDADOO For: Late Model Boom Lifts, Scissor Lifts & more • Online • New Martinsville, WV Fri., September 16, 2022 For: Late & Great Construction Equipment & more RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-3631 All our auctions are now online bidding only!

• Rocky Mountain Regional Event August 3-4, 2022 • Tipton, CA August 10, 2022 • North Franklin, CT August 16, 2022 • Houston, TX August 23-25, 2022 • Orlando, FL September 1-2, 2022 • Phoenix, AZ September 7, 2022 • Edmonton, AB September 7-9, 2022 • Southeast Regional Event September 8-9, 2022 • Pacific NW Regional Event September 9, 2022 • Northeast Regional Event September 13-15, 2022 • Great Plains Regional Event September 15-16, 2022 • Las Vegas, NV September 21, 2022 • Great Lakes Regional Event September 27-28, 2022 • Sacramento, CA September 28, 2022

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com HESS AUCTIONEERS www.hessauctioneers.net 866-511-2493 • Marietta, PA Fri., August 12, 2022 For: Truck, Trailer & Equipment Auction

• Online August 16, 2022

BIG IRON AUCTIONS www.bigiron.com 800-937-3558 • Online August 3, 2022 • Online August 10, 2022 • Online August 17, 2022

DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277 • Convoy, OH Tues., August 9, 2022 For: Buckeye LawnScape, Inc. • Pendleton, IN Fri., September 16, 2022 For: 30th Annual Fall Auction

FREY & SONS, INC. www.freyandsons.com 419-455-3739 • Dansville, MI Thurs., August 25, 2022 For: Joe Raica Excavating and JR Sand & Gravel

• Glencoe, MN Tues., August 2, 2022 For: Construction Equipment & Truck Public Auction

HUNYADY AUCTION COMPANY www.hunyady.com 800-233-6898

• Clayton, IN Sat., August 6, 2022 For: Construction & Farm Equipment Auction

• Virtual Live Tues., August 30, 2022 For: Surplus Liquidation EnviroAir Technologies, Inc.

• Conway, SC Tues., August 9, 2022 For: Construction Equipment & Truck Public Auction

I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • Online Only Wed., August 10, 2022 For: Heavy Equipment, Semi, Truck, Trailer Consignment Auction

August 2, 2022 • Online August 9, 2022

JEFF MARTIN AUCTIONEERS, INC. www.jeffmartinauctioneers.com 601-450-6200

J.J. KANE AUCTIONEERS www.jjkane.com 855-GO2-KANE • Online Tues., August 2, 2022 For: Timed Online Auction • Online Tues., August 2, 2022 For: Surplus & Forfeiture Auction • Online Tues., August 9, 2022 For: Timed Online Auction • Online Thurs., August 11, 2022 For: Government Utility & Fleet Vehicles & Equipment Auction • Online Tues., August 16, 2022 For: Timed Online Auction

JAMES G. MURPHY INC. AUCTIONEERS www.murphyauction.com 425-486-1246 • Online August 9 - 16, 2022 For: Weber Construction Inc. Heavy Equipment, Trucks, Trailers & more • Online August 11 - 18, 2022 For: Kenmore Heavy Equipment & Contractors Equipment Auction

• Brooklyn, MS August 19-20, 2022 For: Construction & Transportation Public Auction • Ladson, SC Tues., September 13, 2022 For: Coastal Carolina Consignment Auction

PURPLE WAVE AUCTION www.purplewave.com 866-608-9283

STEFFES GROUP INC. www.steffesgroup.com 701-237-9173

• Online Wed., August 3, 2022 For: Ag Equipment Auction

• Timed Online August 2 - 9, 2022 For: Steffes Truck & Transportation Auction

• Online Thurs., August 4, 2022 For: Truck & Trailer Auction • Online Wed., August 10, 2022 For: Vehicles & Equipment Auction • Online Thurs., August 11, 2022 For: Construction Equipment • Online Tues., August 16 2022 For: Government Auction • Online Wed., August 17, 2022 For: Ag Equipment Auction • Online Thurs., August 18, 2022 For: Truck & Trailer Auction • Online Wed., August 24, 2022 For: Vehicles & Equipment Auction • Online Thurs., August 25, 2022 For: Construction Equipment

• Kissimmee, FL Thurs., September 22, 2022 For: Construction & Transportation Live Auction

ROSEN & COMPANY, INC. www.rosenandcompany.com 216-990-1831

• Pelzer, SC Thurs., September 29, 2022 For: Fall East Coast Construction & Transportation Auction

• Cleveland, OH Fri., August 19, 2022 For: Live & Online. Huge Summer Machinery & Equipment Consignment Auction

MIEDEMA ASSET MANAGEMENT GROUP www.1800lastbid.com 616-538-0367 • Online Repocast.com Ends August 2, 2022 For: Construction/Heavy Equipment & Commercial Lawn Equipment • Online Repocast.com Ends August 11, 2022 For: Trucks, Trailers Equipment & much more • Online Ends August 18, 2022 For: Southern Michigan Equipment Auction • Online Orbitbid Ends August 23, 2022 For: General Contractor Equipment & Support Tools Auction NORTH COUNTRY AUCTIONS www.northcountry-auctions.com 603-539-5322 • Dighton, MA August 6 - 7, 2022 For: 2nd Annual Classic Car Auction

RTI AUCTIONS www.teitsworth.com 585-243-1563

• West Fargo, ND Wed., August 3, 2022 For: AGIRON Event • Timed Online August 4 - 11, 2022 For: XS Dakota LLC Reduction Auction • Timed Online August 5 - 10, 2022 For: Online Steffes Auction • Timed Online August 16 - 23, 2022 For: Scott A Cook Estate Construction Equipment • Timed Online August 17 - 24, 2022 For: Northern Lights Specialized LLC Retirement Auction • Timed Online August 19 - 24, 2022 For: Online Steffes Auction • Timed Online August 23 - 30, 2022 For: Big Lease Trucking Equipment Reduction • Timed Online August 24 - 31, 2022 For: Colorado Consignment Auction • Mt. Pleasant, IA Thurs., August 25, 2022 For: AGIRON Event • Timed Online Aug. 31 – Sept. 7, 2022 For: Danielson Services Inc. Retirement Auction • Timed Online Aug. 31 – Sept. 7, 2022 For: JNS Trucking Inc. Retirement Auction

• Timed Online September 1 - 8, 2022 • Online For: Miller Concrete& August 2 - 9, 2022 For: August NetAuction Edition 1 Excavating • Timed Online September 2 - 7, 2022 SALES AUCTION COMPANY, LLC For: Online Steffes Auction www.salesauctioncompany.com • Litchfield, MN 860-627-7506 September 8, 2022 • Windsor Locks, CT For: AgIron Litchfield Auction Sept. 30 – Oct. 1, 2022 th For: 13 Annual Fall Auction WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 SAMMY P AUCTION SERVICES www.SammyP.com • Online 860-564-9400 Sat., August 13, 2022 For: Heavy Equipment & • Virtual Live Vehicles Auction Tues., August 23, 2022 For: Wild Heart Industries, Complete Inventory Dispersal YODER & FREY HEAVY EQUIPMENT AUCTIONS www.yoderandfrey.com SHERIDAN REALTY 419-865-3990 & AUCTION COMPANY www.sheridanauctionservice.com • Kissimmee, FL 517-676-9800 Wed., August 31, 2022 For: Unreserved Public Auction • Online Only Tues., August 30, 2022 • Findlay, OH For: Quinn Excavating & Paving Thurs., September 22, 2022 Auction For: Unreserved Public Auction

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 65

Buying or Selling?

Call any of these professional auction companies

Why Use Iron Bound?

That’s easy...

It’s SIMPLE and EFFECTIVE! We’ll market and sell your equipment, get top dollar for you and we’ll take the hassle out of the process.

A Strategic As sset Managemen nt Full Service e Auction House

THE T TIME IS NOW W

vantageauctions.c com

951.228.90040

Conveniently located for sellers in the Permian Basin, West Texas, the Panhandle & New Mexico.

Address: Iron Bound Solutions LLC 750 US HWY 180 Seminole, TX 79360 Phone: 432-209-5112

Brosamer & Wall Crews Work Backwards to Complete Job CANAL from page 62

“There were times when we had a track go out. Sometimes we would be able to fix it — it would be down for 20 to 30 minutes. We’d have a hydraulic line go down and be able to fix it on the spot. There were a few times when something would break down for a day. We had our mechanics on-site to take care of equipment large and small.

“Ken Gilmour configured all the paving equipment,” he added. “He’s been in the canal industry for a long time.

Working in Summer Heat The project has its challenges, such as paving in the hot Arizona summers.

“It gets up to 110 and 120 degrees,” said Gonzalez. “To keep the work moving in April and May, we started paving around 11 p.m. until 5 or 6 a.m. — before it got too hot. CEMEX added ice to kep the mix cool and sprayers would spray the drums on the outside to keep the concrete cool.”

The crews were well hydrated, but working at night was not uncomfortable until the morning when the sun began to shine.

“There were electrical and gas utilities that needed to be relocated,” said Gonzalez. “Some of the lines were too low and had to be moved and raised. It was a challenge working with the utilities — trying to work around them and with them to keep the work moving. For soil, there were some areas with unsuitable soil, heavy clay, but that was accounted for in the estimate and specifications. In those areas we removed the unsuitable material and replaced it with good soil. Our goal was to keep all operations going to stay on schedule for the canal lining.

“The original canal was a dirt-lined canal,” he added. “We widened it, built it up, and lined it with concrete. There were some areas where there was going to be a new alignment, so we built a new portion.”

(All photos courtesy of Brosamer & Wall.)  CEG

The project features construction of approximately 11.50 mi. of concrete lined canal, structures, and concrete pipes.

Page 66 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Public Auction held the 2nd Saturday of every month.

Preview Every Monday - Friday 7am - 4pm Consignments Welcome Western Sales Management, Inc 1616 S 67th Ave. Phoenix, AZ 85043

623-936-3300 wsmauctioneers.com wsmauctionbiz@yahoo.com

Next Online Virtual Auction August 13, 2022

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 67

James G. Murrphy Co. 4 425.486.1246 murphyauctio on.com

PUBLIC PUB LIC O ONLINE NLINE A AUCTION UCTI U CTION VEHICLES

-BID O ON NLIN NEUM U MS NO MINIMU NO RESERVES V

James G. Murph hyy Co. 425.486..1246 murph hyyaauction.com

2014 JOHN DEER RE 35D

CAT D3C LPG C

2007 CASE 580M SER RIES 2

2005 CASE 580M SERIES 2

H T800 2013 KENWORTH

GIN CROSSWIND NX 2010 ELG

2019 CHEV 6500H HD

2007 INTE ERNATIONAL 7400

Previe ew Updated Daily At Murphyauction.com LOCATED L O CATED IN P PORT OR RT L LUDLOW,WA UDLO W,WA

2012 GENIE GTH-5519 9

GALION T500M

2006 KOBELC CO SK290LC

(1 OF 4)

2012 NEW HOLLAND T50 050 ADDITIONAL ITEMS: •UTILITY VEHICLES •EXCA •EXCA AV VA AT TORS •LOADER

2004 FORD F750 •ROUGH TERRAIN CRANE ES •SERVICE BODY TRUCKS •FORKLIFTS •VAC TRUCKS

JOHN DEERE 319D

1994 STURDYWELD

1 OF O 3 SMITHC SMITHCO O SX4-49-3 SX4-49-36 36 TRAILERS

2010 INTERNAT TIONAL 4300 •FLA AT TBEDS •STEP VANS •TRAILERS AND MUCH MORE! M

THE WEBSITE IS UPDATED AT DAIL LY Y!

2017 SM MITHCO SX4-49-36

Page 68 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

James G. Mur u phy Co. 6 4 425.486.1246 murphyauctio i n.com

-BID O ON NLIN NEUM U MS NO MINIMU NO RESERVES V 3,525 HRS

1998 A AT TLAS COPCO R0C642HP R

PUBLIC PUB LIC O ONLINE NLINE A AUCTION UCTI U CTION Start Date:

End Date: Preview: Location:

5,003 HRS

1995 A AT TLAS S COPCO R0C512HC-01

2,337 HRS

2002 CA AT T 420D

1995 CA AT T 330L

197 75 CA AT T D6C

4,691 HRS

CL LARK CHY180B

REBUILT REBUIL T TR TRANS RANS

1987 KOMA AT TSU GD70 05A-4

N DEERE 450G TC 1993 JOHN

Previe ew Updated Daily At Murphyauction.com

HYSTER H40XL

Go T To o Murphyauction.co om For More Inffo ormation

HYSTER Z90 0

(2) 20’ SHIPPING G CONT TA ANERS

INGERSOLL L RAND SD115D

PSM

AM GE ENERAL L M998 HUMMER

1 1993 CA AT T 120G

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 69

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com.

For information on CRANE SAFETY COURSES: Contact Information: cranesafe@gmail.com Telephone: 800/654-5640 Address: 224 W. Central Parkway Suite 1024 Altamonte Springs, FL 32714 ASSOCIATED GENERAL CONTRACTORS (AGC) AGC EVENTS CALENDAR: All AGC Web-Eds are scheduled in Eastern Standard Time (EST) Conferences are scheduled using the local time zone where the event takes place.

• AGC EDGE Lean Construction Education Program (https://training.agc.org/course/vclea220801) Date: Monday, August 1, 2022 – 2:00 PM (EST) ONLINE, Virtual Training/Professional Development • AGC EDGE Project Manager Development Program https://training.agc.org/course/vpmdp220801/) Date: Tuesday, August 2, 2022 - 2:00 PM EST ONLINE, Virtual Training/Professional Development • AGC EDGE BIM Education Program https://training.agc.org/course/vbim220801/) Date: Tuesday, August 9, 2022 – 11:00 AM EST ONLINE, Virtual Training/Professional Development • AGC EDGE Construction Supervision Fundamentals (CSF) Education Program (https://training.agc.org/course/vcsf220801/) Date: Wednesday, August 10, 2022 – 9:00 AM ONLINE, Virtual Training/Professional Development • 2022 IT Conference (https://itconference.agc.org/) Date: Tuesday, August 16, 2022 (8:00 AM) Location: Chicago, Illinois Technology • AGC EDGE BIM Education Program (https://training.agc.org/course/vbim220802/) Date: Tuesday, August 30, 2022 – 1:00 PM EST ONLINE, Virtual Training/Professional Development • AGC EDGE Construction Supervision Fundamentals (CSF) Education Program (https://training.agc.org/course/vcsf220901/) Date: Friday, September 9, 2022 – 9:00 AM EST ONLINE, Virtual Training/Professional Development • AGC EDGE Project Manager Development Program (https://training.agc.org/course/vpmdp22904/) Date: Monday, September 12, 2022 – 6:00 PM EST ONLINE, Virtual Training/Professional Development • AGC EDGE Lean Construction Education Program (https://training.agc.org/course/vlea220901/) Date: Tuesday, September 13, 2022 – 2:00 PM EST ONLINE, Virtual Training/Professional Development • AGC EDGE Project Manager Development Program (https://training.agc.org/course/vpmdp220901/) Date: Monday, September 19, 2022 – 10:00 AM (EST) ONLINE, Virtual Training/Professional Development • AGC EDGE Project Manager Development Program https://training.agc.org/course/vpmdp220902/) Date: Monday, September 26, 2022 – 2:00 PM (EST) ONLINE, Virtual Training/Professional Development • Five-Part Webinar Series: Top 10 Safest Construction Companies in America (https://www.agc.org/learn/education-training/events/five-partwebinar-series-top-10-safest-construction-companies-America) Date: Tuesday, September 27, 2022 – 3:00 PM Training/Professional Development For further information, contact AGC: Phone: 703/548-3118 Fax: 240/396-2470 Email: info@agc.org AGC EDGE Project Manager Development Program (https://training.agc.org/course/vpmdp220903) Date: Friday, September 30, 2022 – 10:00 AM EST ONLINE, Virtual Training/Professional Development AGC EDGE BIM Education Program (https://training.agc.org/course/vbim221001/) Date: Monday, October 3, 2022 – 5:00 PM EST ONLINE, Virtual Training/Professional Development 2022 CLC Leadership Development Conference (https://clc.agc.org/) Date: Wednesday, October 5, 2022 – 3:00 PM Point Clear, Alabama AGC EDGE Lean Construction Education Program (https://training.agc.org/course/vlea221001/)

Date: Tuesday, October 11, 2022 – 11:00 AM ONLINE, Virtual Training/Professional Development Associated Equipment Distributors’ Leadership Conference AED – 2022 Leadership Conference The purpose of Associated Equipment Distributor’s Leadership Conference is to create a forum for AED members to participate in the affairs of the Association, advance the common interests of equipment industry companies, partake in educational programming, network with industry colleagues, strengthen existing business relationships, and identify new business opportunities.

EVENT DESCRIPTION: 2022 LEADERSHIP CONFERENCE DATE: Monday, August 15, 2022 - Wednesday, August 17, 2022 All Day LOCATION: Halcyon Hotel Cherry Creek ADDRESS: 245 Columbine Street Denver, CO 80206 For more information on this Conference, contact AED directly: AED address: 650 E. Algonquin Road Suite 305 Schaumburg, IL 60173 TELEPHONE: 630/574-0650 CONSTRUCTION ASSOCIATION OF MICHIGAN (CAM) Formerly Builders Exchange of Detroit and Michigan. CAM is a professional association of design and construction professionals which provides service, information, and assistance to the construction industry. Members include architects, engineers, suppliers, manufacturers, and contractors.

• Construction Association of Michigan 2022 Golf Season Registration is Open!

Dates: September 26, 2022 - Edgewood Country Club These outings are perfect opportunities to bring your staff and clients out for a great afternoon of golf!

ASSOCIATED EQUIPMENT DISTRIBUTORS (AED) (https://www.aednet.org) 2022 Leadership Development Institute What is LDI? The AED Leadership Development Institute (LDI) is a program for high-potential managers who are expected to prepare for broader organizational roles.

Why LDI? LDI is the only industry-specific leadership program in the market today that takes participants out of their individual silo and encourages them to focus on the business, as-a-whole. Developed based on feedback from both distributors and manufacturers, LDI is designed to prepare the next generation of dealership leaders for upcoming roles in their dealership. This comprehensive program covers content in both the operational areas of a dealership as well as personal leadership development.

• SESSION: October 12 – 14, 2022 Leading Self-Leading Others . How to have coaching conversations . Leading self and others through change Relational Capital . Building relational capital . Connecting with others – your team and your customers . Collaboration over command . Making every interaction matter Program Review . Final capstone presentations For more information on this session, contact AED: Phone: 630/574-0650 NATIONAL HISPANIC CONSTRUCTION ASSOCIATION Address: 1330 Locust Road NW Washington, DC 20012-1319 Phone +1 (214) 566-2410Email: info@builtbylatinos.org About Us: The National Hispanic Construction Association (NHCA) is a non-profit membership organization representing over 4,500 companies across the country that are directly affiliated with NHCA chapters. Join us!

Mission: To serve the Hispanic Construction professional at the national and state level in advocacy, education, training, business resources and communication.

Vision: To be the leading association that represents and supports the business interest of the Hispanic construction professional.

Key Objectives: . Become a primary source of information for the construction industry in the United States. . Help local and state chapters achieve long term success positioning themselves within the construction industry. . Develop strong governmental relations and lobbying efforts. . Advocate for equitable level participation of Hispanic owned construction businesses in contracting opportunities. . Provide cutting edge education, technical programs, and training in the construction industry

Events are subject to change, check websites for updates

Page 70 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com AFE .................................................................................................17 ALEX LYON & SON INC.................................................................69 ASTEC/CARLSON PAVING PRODUCTS .....................................25 ASTEC/ROADTEC ..........................................................................31 ASV .................................................................................................54 BARGAINS ......................................................................................60 BELL TRUCKS AMERICA INC.......................................................59 CALVIN GROUP INC ......................................................................21 CEG SCALE MODELS....................................................................22 CONDUIT SEARCH GROUP..........................................................50 CONSTRUCTION EQUIPMENT GUIDE.........................10,16,38,63 DYNAPAC ..................................................................................36,37 FLANGE LOCK................................................................................13 HENDRIX MACHINERY LLC............................................................3 HITACHI CONSTRUCTION MACHINERY ...............................56,57 HYUNDAI CONSTRUCTION EQUIPMENT ..............................60,61 IEDA.................................................................................................18 IRON BOUND AUCTIONS..............................................................65 JAMES G MURPHY CO ............................................................67,68 JCB INC ...........................................................................................51 JFW EQUIPMENT INC ...................................................................32 JJ SCHECKEL CORP .......................................................................5 JOHN DEERE..................................................................................45 JOHN DEERE SKID STEER ..........................................................58 KIRBY-SMITH MACHINERY INC ...................................................72 KOMATSU AMERICA CORP..........................................................47 LEEBOY...........................................................................................27 MAULDIN PAVING PRODUCTS ....................................................35 MB AMERICA INC...........................................................................43 MONTABERT ..................................................................................17 NIECE EQUIPMENT .......................................................................19 NPK CONSTRUCTION EQUIPMENT INC.....................................46 OKADA AMERICA INC ...................................................................43 RAMMER .........................................................................................41 RITCHIE BROS. AUCTIONEERS ..................................................71 ROAD BUILDERS MACHINERY ......................................................9 ROTOTILT INC................................................................................15 SAKAI AMERICA INC .....................................................................29 SANY AMERICA INC ......................................................................11

SMH GROUP-US ..............................................................................6 SONSRAY MACHINERY ..................................................................2 SUMMIT SUPPLY GROUP...............................................................7 TAKEUCHI..................................................................................52,53 TROPHY TRACTOR .......................................................................20 VANTAGE AUCTIONS....................................................................65 VOLVO COMPACTION...................................................................26 VOLVO CONSTRUCTION EQUIPMENT..................................48,49 WACKER NEUSON AMERICA CORPORATION..........................55 WAINROY..........................................................................................7 WEILER PRODUCTS .....................................................................28 WIRTGEN AMERICA ......................................................................33 WSM AUCTIONEERS.....................................................................66 CALIFORNIA SUPPLEMENT BAR NONE AUCTION ......................................................................1 CALIFORNIA CAT GROUP ..............................................................3 GARTON TRACTOR INC .................................................................5 JCB CALIFORNIA ...........................................................................12 MECHANICAL & IRRIGATIONS.......................................................9 MEGA MACHINERY CO.................................................................11 PIRTEK CALIFORNIA .......................................................................5 RPI .................................................................................................11 SCOTT EQUIPMENT - FONTANA...................................................2 VOLVO CONST EQUIP & SVCS ..................................................6,7 WESTERN RENTALS.....................................................................11 PACIFIC NORTHWEST SUPPLEMENT...................................

COLUMBIA WESTERN MACHINERY ...........................................11 CONSTRUCTION EQUIPMENT GUIDE ........................................12 JET CITY EQUIPMENT ....................................................................3 MODERN MACHINERY...............................................................2,15 ORION EQUIPMENT ......................................................................16 PACWEST MACHINERY.............................................................5,15 PAPE MACHINERY ..........................................................................9 SAKAI AMERICA INC .....................................................................13 SCOTT LAND & TIMBER .................................................................8 TRIAD MACHINERY .........................................................................7

The Advertisers Index is printed as a free editorial service to our advertisers and readership.

Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • July 31, 2022 • Page 71

Unreserved public equipment auctions Plan for tomorrow with pre-approved financing – PurchaseFlex™ Financing*

John Deere 85D | Tipton

Volvo EC250DL | Tipton

2019 Caterpillar 160M3 AWD Rocky Mountain Regional Event

2013 Caterpillar 349E L | Rocky Mountain Regional Event

Link-Belt HTC-8670 70 Ton 8x4 Rocky Mountain Regional Event

6 – 2019 John Deere 310 SL 4x4 Rocky Mountain Regional Event

Grove GMK6200 200 Ton | Houston

2019 John Deere 850L | Rocky Mountain Regional Event

2 – Volvo A40F | Rocky Mountain Regional Event

44,175+ items in 70+ auctions including Rocky Mountain Regional Event Aug 3–4 Tipton, CA Aug 10 North Franklin, CT Aug 16 Houston, TX Aug 23–25 Orlando, FL Sep 1–2 Phoenix, AZ Sep 7 Edmonton, AB Sep 7–9

Southeast Regional Event Sep 8–9 Pacific Northwest Regional Event Sep 9 Northeast Regional Event Sep 13–15 Great Plains Regional Event Sep 15–16 Las Vegas, NV Sep 21 Great Lakes Regional Event Sep 27–28 Sacramento, CA Sep 28

Financing & leasing available

Online bidding information

Up to 100% financing, with no money down.

▸ No minimum bids or reserve prices ▸ It's always free to register and bid online in any of our auctions, create your account now!

More items added daily Call about selling: 1.800.211.3983

See full auction & equipment listings at rbauction.com Auctioneer Pat Hicks #13818, Auctioneer Kevin Perry #13972, Auctioneer Greg Highsmith #13285, Auctioneer James Valentine #15239, Auctioneer Fred Vilsmeier #16305, Auction Company Bond #0470724, Used Motor Vehicle Dealer License #2647, Auction Company Bond #0470724, Auction Business License #AB303, Auction Company License # 001348, Auction Company License # 1981, Motor Vehicle Dealer License #DLR25867, Auction Company Bond #0470724, Auction Firm License # 444.000193, Auction Firm # 2008000166 ** OAC. Terms & conditions apply. See rbauction.com/financing.

Page 72 • July 31, 2022 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE