Midwest 13, June 27, 2020 by Construction Equipment Guide

Published Nationally

$3.00

Midwest Edition

June 27 2020 Vol. XXV • No. 13

“The Nation’s Best Read Construction Newspaper… Founded 1957.” 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • www.constructionequipmentguide.com

Inside

Wisconsin’s $1.2B I-39/90 Entering Home Stretch

RDO Equipment Opens Newest Store in Dayton, Minn....14

Southeastern Equipment Names Retirees, MVP Award...18

Twenty miles of the Interstate between Madison and Edgerton have been widened to three lanes and are open to traffic. More than 100 bridges also are complete. Rosen, Buddy Barton Hold On-Site Auction in Cleveland...70

Table of Contents ................4

By Lori Tobias CEG CORRESPONDENT

A $1.2 billion Wisconsin interstate project under construction since 2015 is now two-thirds completed. The WisDOT Interstate

39/90 project stretches 45 mi. from the Illinois border to the U.S. 12/18 interchange in Madison. The original highway was built more than 50 years ago and is dated, inefficient and unsafe, according to WisDOT. The project widens the

two lanes in each direction to three lanes, and, on a portion through Janesville, to four lanes. “We are reconstructing and expanding the Interstate to mainly improve efficiency and safety and also to meet today’s standards,”

said WisDOT spokesman Steve Theisen. “We have a lot of cloverleaf interchanges. We need to create diverging diamond interchanges [DDI].” see WISDOT page 52

Recycling Section ........28-40 Attachment & Parts Section ......................................47-51 Truck & Trailer Section ........ ......................................58-63 Auction Section ............67-73 Business Calendar ............69 Advertisers Index ..............74

Turner Mining … ‘Mine-Changing’ Innovation By Lori Lovely CEG CORRESPONDENT

At the age of 27, Keaton Turner wanted to “make mining sexy again,” so he decided to “take a swing” at launching a contract mining company. He said he wants people to know how “awesome” the industry is. “A lot of people think mining is the underground dirty coal

mine, but it’s just not.” The Indiana native with degrees from Indiana State University in construction and business administration worked for his uncle’s excavating company for eight to 10 years but didn’t think he’d live in “the dirt world.” However, he liked traveling and being outside … and he noticed something about the mining industry that suggested an opportunity.

“The mining industry is unique,” he said, adding that it’s rooted in tradition and has an older workforce. “The average age is 52.” At a recent roundtable, Turner confessed that at age 16, he had no thoughts of getting into the mining industry. “I grew up liking trucks and excavators, but this industry looks scary from an outsider’s perspective. It looks old.” see TURNER page 46

Page 2 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2004 Cat D10R / $475,000

2014 Cat 12M2 AWD / $135,000

2017 Cat M320F / $289,500

SN: AKT00618 Hours: 10,643

SN: R9P00171 Hours: 8,463

SN: FB200394 Hours: 72

2012 Cat D8T / $399,000

2014 Cat 980K / $220,000

2016 McCloskey I44R / $445,000

SN: MLN00696 Hours: 4,469

SN: W7K02169 Hours: 8,617

SN: MC85735 Hours: 1,163

2015 Cat 420F2/ $75,000

2017 Cat 299D2 / $69,500

2015 Cat 259D / $44,000

SN: HWC00600 Hours: 998

SN: FD201818 Hours: 1,666

SN: FTL03233 Hours: 1,090

636.384.4021 36 LOCATIONS ACROSS MO, IL, WI & MI

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ June 27, 2020 â€¢ Page 3

2014 JL LG 660SJ Aerial Lift ........ $59,500 00 'HXW] 7' / 7LHU +3 GLHVHO Â¶ SODWIRUP KHLJKW :' ZKHHO VWHHU 6N\ SRZHU Â¶ EDVNHW Â¶ MLE [ WLUHV JUDGDELOLW\ OEV KUV 67

2018 JLG 1255 Telehandl e ler ... $107,500

2016 New Holland land C238 Skid Steer .. $40,000

:' OEV Â¶ UHDFK IURQW VWDELOL]HUV Â´ [ Â´ carriage, front hydraulic coupler, aux. x. hydraulics, multifunction display w/backup cam, road d lights, work lights, EHDFRQ OEV ZDUUDQW\ KUV 67

$ & UDGLR +3 KDQG FRQWUROV ,62 SDWWHUQ FKDQJHU speed, 3,800 lb. operating perating cap., hydr. mount plate, ride control, self-level, turn signals, multi-function electrical, 10,100 lbs. Emissions Wa arranty 9/18/21., 559 hrs.. ..... #N4448

2016 JLG 1055 Forklift ........ $102,500

2016 De eere 670G Motor Grader .. $139,500 00

2012 Cat 420EIT Loader Backhoe. ackhoe. $42,500

2015 Cat 420F2 F2 Loader Backhoe .. $72,500

Heat, 130HP T4f, 4WD, 55 5â€™ reach, front stabilizers, solid tires, 3 mode steering, auxiliary hydraulics, road lights, work lights, b beacon, fenders, 33,100 OEV KUV 67 $

Rear Ripp per, Lo Pro Cab, heat and A/C, 235 HP T4i, variable horsepower, 4WD, 14â€™ moldboard, pow owershift, hyydraulic sideshift, push block, air ride seat, t, 5 WLUHV GLá‚‡ ORFN KUV

+3 :' VKXá‚‰H VKLIW WUDQV H[WHQGD KRH Â¶ Â´ dig depth, 1.31 yrd bucket, front hydr dr. coupler, front aux K\GU IURQW HOHFWULF KRRNXS Ã€LS RYHU DXWR XS VWDELOL]HUV Â´ UHDU EXFNHW OEV KUV

A/C, 100HP Tier 4 diesel, 4WD, auto shift trans., extenda-hoe, Â¶ Â´ GLJ GHSWK \G IURQW EXFNHW Ã€LS RYHU VWDELOL]HUV Z guards, auto up stabilizers, abilizers, aux rear hyd., hydraulic thumb, Â´ UHDU EXFNHW FROG ZHDWKHU SNJ KUV

2015 Kobelco SK140 0SRLC-3 .... $92,500

â€˜14 Hydre ema 912ES w/ High Rail Gear. $119,500 00

2016 Deere 544K Wheel Loader oader . $129,500

â€˜16 Atlas XAS 185 KD7 Compressor . $12,500

A/C, 141HP diesel, High Rail Gear, multi tip rotating box, x, up to 90 degrees egrees left/right, 10 ton capacity, auto. trans., s., :' DXWR ERG\ UHWXUQ WR FHQWHU SRVLWLRQ GLá‚‡ ORFN KHDWHG VHDW UHDU YLHZ FDPHUD KUV

A/C, 125HP T4f diesel, JRB q-tach ch bucket, joystick control, F-R thumb switch, ride control, ontrol, 20.5R25 WLUHV OLPLWHG VOLS GLá‚‡ UHDU GLá‚‡ ORFN FROG ZHDWKHU package, 29,200 lbs., 338 hrs. .................... ................. #11513

Kubota V2403-CR-EF02 CR-EF02 49HP Tier 4F diesel, & ) 0 S V L ' W L U H V S L Q W O H K R R N 2,330 lbs., sand d blast pot at additional cost., KUV 1

$ & +3 7LHU GLHVHO ,1'5 Â´ SDGV Â¶ Â´ VWLFN Â¶ Â´ GLJ GHSWK DGGLWLRQDO FRXQWHUZHLJKW SDWWHUQ control, hand control 1-2 way aux. hydraulics, top ZRUN OLJKWV OEV KUV .2%

â€˜14 Kobelco SK350LC C Excavator. $147,500

â€˜18 Kobe elco SK85CS-3E Excavator . $64,50 00

â€˜18 Kobelco SK85CS-3E Excavator cavator . $67,500

2012 Cat M322D D Wheeled Excavator... $154,500

$ & +3 7LHU GLHVHO ,1'5 Â´ UXEEHU SDGV Â¶ Â´ VWLFN Â¶ Â´ GLJ GHSWK DGGLWLRQDO FRXQWHUZHLJKW KDQG FRQWURO ZD\ DX[ K\GUDXOLFV OEV KUV .2%

$ & +3 ,1'5 UXEEHU WUDFNV Â¶ VWLFN Â¶ Â´ GLJ GHSWK 8â€™ pushblad de, swing boom, 1&2 way hydraulics, mechanical TXLFN FRXSOHU SDWWWWHUQ FRQWURO DGGLWLRQDO FRXQWHUZ ZHLJKW OEV Wa arranty 3,000 3 hr. or 10/24/20, 2,392 hrs. .......... #KOB34 44

$ & +3 ,1'5 UXEEHU WUDFNV Â¶ VWLFN Â¶ Â´ GLJ GHSWK 8â€™ pushblade, swing boom, 1 & 2 way aux. ux. hydraulics, hydraulic quick coupler, pattern control, additional counterweight, OEV :DUUDQW\ KUV RU KUV .2%

$ & +3 GLHVHO Â¶ Â´ VWLFN Â¶ Â´ GLJ GSWK DX[LOLDU\ hydraulics, 4 outriggers, riggers, anti drift valves, roading pkg., &DW YDULDEOH SLQ JUDE K\G FRXSOHU Â´ GLWFKLQJ EXFNHW ZLQGRZ JXDUG OEV KUV

sales@iltruck.com l @illt k â€¢ re ental@iltruck.com t l@ilt k â€¢ 815-941-190 815 941 190 00 Illinois Truck & Equipment 3 320 Briscoe Drive, Morris Illinois 60 0450

www.iltruck.com

Page 4 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

IN THIS ISSUE 10

MINIMIZING RISK: MANUFACTURERS SHARE BEST PRACTICES

AEM has developed a list of best practices based on what many of our member companies are doing to keep operations open while minimizing the risks associated with the COVID-19 pandemic.

RDO EQUIPMENT OPENS FULL-SERVICE STORE IN DAYTON, MINN.

EXODUS MACHINES WELCOMES BRIAN HAWN AS NEW V.P. OF SERVICE

Exodus Machines announced the appointment of Brian Hawn as the new vice president of service of Exodus Machines and its divisions — BladeCore, Connect Work Tools, OilQuickUSA and ShearCore.

The Asphalt Pavement Alliance announced that the North Dakota Department of Transportation has won a 2019 Perpetual Pavement Award for an 11.3-mi. section of North Dakota Highway 5 in Pembina County.

To assist those impacted by the coronavirus pandemic, Mack Trucks and the American Trucking Associations are partnering with the American Logistics Aid Network to deliver vital supplies to nonprofit organizations to distribute.

Southeastern Equipment said goodbye to two long-time employees: Jerald (Herbie) Denius, truck driver and Chip Cropper, regional manager. Cropper also has been awarded Southeastern’s MVP Award.

Fleet Advantage announced a new Sale-Leaseback program designed to infuse cash and flexibility into transportation fleets. It developed this program to help organizations substitute for lost revenues during the COVID-19 pandemic.

NORTH DAKOTA DOT WINS PERPETUAL PAVEMENT AWARD

SOUTHEASTERN EQUIPMENT ANNOUNCES RETIREES, MVP AWARD

NEBRASKA DOT SHARES FREMONT BELTWAY CONSTRUCTION SCHEDULE

MACK, ATA TEAM UP WITH ALAN TO DELIVER VITAL AID, GOODS

Volvo Construction Equipment has named Tyler Equipment its 2019 Dealer of the Year in North America. The company also awarded Housby Heavy Equipment the title of 2019 Uptime Dealer of the Year.

The Steffes Group will return to live auctions when bidders gather in Horace, N.D., on July 8. The event will mark 117 days since the company’s most recent live auction.

VOLVO CE NAMES TYLER, HOUSBY AS 2019 DEALER WINNERS

Edwin M. McKeon Sr. Joseph S. McKeon Teddy McKeon Craig Mongeau Robby Chakler Katherine Devlin Pete Sigmund John Pinkerton Judith Nixon Cathy Printz

www.constructionequipmentguide.com

Facebook

Twitter

ROSEN, BUDDY BARTON HOLD ON-SITE AUCTION IN CLEVELAND

LIVE AUCTIONS RETURN WITH FARM RETIREMENT, AGIRON, MORE

SENNEBOGEN 718 ‘FORCE MULTIPLIER’ CRUSHES WORKLOAD REMU CR 1100 CRUSHING BUCKET CRUSHES DEMOLITION WASTE

MB CRUSHER HELPS CRAMPED CROATIAN TOWN LAY NEW WATER PIPES

KOMATSU SHOWCASES ZT44 TRACK DRILL FOR QUARRY OPERATIONS

DEPARTMENTS

67 69

COMING AUCTIONS BUSINESS CALENDAR

47 48 51

DOOSAN Excavator Attachments JOHN DEERE TC-Series Trenchers ESCO Ultralok Tooth System

EQUIPMENT

Joseph S. McKeon

Kent Hogeboom

Ed Bryden

Patrick Kiel

• Illinois • Wisconsin • Northwest Indiana • Missouri • Kansas

• National Sales Manager

• Central and Eastern Indiana • Michigan • Ohio • Kentucky

• Iowa • Minnesota • Nebraska • North Dakota • South Dakota

Cell e-mail

Advertising e-mail production@cegltd.com

Mobile

For advertising rates Contact

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900 Toll Free 800/523-2200 Fax 215/885-2910 Web site

GEITH RAMPS UP ITS DISTRIBUTION MODEL WITH TWO LOCATIONS

RECYCLING SECTION

Rosen & Company, with Buddy Barton of Buddy Barton Auctions, held a construction and industrial equipment auction in Cleveland, Ohio, on June 12 at Collinwood Iron and Metal Recycling and Salvage’s equipment yard.

Founder, Publisher & CEO Midwest Publisher Executive Publisher Editor In Chief Senior Editor Editorial Assistant Editorial Consultant Production Mgr. Controller Circulation Mgr.

Geith is going back to its Irish roots with a distribution model that supplies customers with its products faster than ever before. Its new distribution centers are located in Atlanta and Cooperstown, N.D.

IOWA APPROVES $3.6B FY 2021-2025 TRANSPORTATION PLAN

In the center of downtown Detroit, Mich., a retired hockey arena stood in the way of the development of a section of land on the Detroit River at the border of the United States and Canada.

MAMMOET LOWERS JOE LOUIS ARENA’S MAIN ROOF TRUSS

The Iowa Transportation Commission approved the Fiscal Year 2021-2025 Iowa Transportation Improvement Program at its meeting on June 9. The program documents investments in Iowa’s multimodal transportation system.

FLEET ADVANTAGE ANNOUNCES NEW SALE-LEASEBACK PROGRAM

The Nebraska Department of Transportation (NDOT) announced construction on the Fremont Southeast Beltway could begin as early as July 6 due to financial support from the Fremont community.

Circulated Throughout • North & South Dakota • Nebraska • Kansas • Minnesota • Iowa • Missouri • Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky

To read these stories and many more, visit www.constructionequipmentguide.com

FEATURES

MIDWEST EDITION

YouTube

773/769-4090 312/953-0375 jmckeon@cegltd.com

Cell e-mail

315/866-1423 518/221-5159 khogeboom@cegltd.com

Cell e-mail

440/243-9690 440/865-0630 ebryden@cegltd.com

Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction Equipment Guide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free 800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changes to Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not responsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

Contents Copyrighted ©2020, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from

Cell e-mail

952/353-1770 612/481-8557 pkiel@cegltd.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 5

V I S I T

Quality Used Equipment... with support to back it up Financing Available for Qualified Buyers

2017 KOMATSU 845

$339,500

2013 DEERE 703JH

2015 KOMATSU D61PX-24

$169,500

2015 WIRTGEN W220

STK# VT20014, 2,200 HRS, EAU CLAIRE, WI

STK# KM20131, 3,073 HRS, SCHOFIELD, WI

$150,000

2014 KOMATSU PC390LC-10 $189,500 STK# KM19270, 4,994 HRS, EAST PEORIA, IL

2018 KOMATSU PC238USLC-11 $189,500

$CALL

2012 KOMATSU PC240LC-10 $124,500

2018 TIMBERPRO TN725D

$399,500

2015 KOMATSU D65PX-18

$209,500

STK# JD19018, 12,102 HRS, EAU CLAIRE, WI

STK# WG19010, 3,964 HRS, SPRINGFIELD, IL

STK# KM18358, 4,500 HRS, SPRINGFIELD, IL

2017 KOMATSU PC210LC-11 $149,500

2016 KOMATSU D39PX-24

$119,500

2017 KOMATSU WA320-8

2016 KOMATSU D155AX-8

2017 KOMATSU WA270-8

$144,500

2015 KOMATSU PC170LC-11 $119,500

STK# KM19698, 2,751 HRS, SPRINGFIELD, IL

$379,500

STK# KM16370, 2,860 HRS, FRANKSVILLE, WI

STK# KM19557, 943 HRS, PALMYRA, MO

STK# KM18364, 828 HRS, PORTAGE, IN

$159,500

STK# KM19425, 1,039 HRS, CAPE GIRARDEAU, MO

STK# KM20118, 3,185 HRS, PALMYRA, MO

STK# KM20134, 1,464 HRS, DEFOREST, WI

STK# TP20001, 2,235 HRS, SCHOFIELD, WI

STK# KM19234, 3,500 HRS, SPRINGFIELD, IL

2016 KOMATSU PC138USLC-11 $119,500 STK# KM19402, 2,360 HRS, SPRINGFIELD, IL

17 Roland Branch Locations in IL, IN, MI, MO, and WI

Used Sales (217) 789-7711

R O L A N D M A C H I N E R Y . C O M

Page 6 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mark Kruepke • (630) 739-7770 Bolingbrook, IL Contact us at Used@McCannOnline.com

View our complete Used & “Like New” inventory at McCannOnline.com

Illinois Addison 630-627-0000 Bolingbrook* 630-739-7770 Chicago 312-942-9200 Crestwood 708-597-3110

2019 Case 621G loaders available. Low hour, warranty, financing available. Call today for details

Case 2019's 100-225 hours Your choice $36,490

McHenry* 815-385-0420 Wauconda 847-526-9444

Indiana Merrillville 219-576-7800 Mishawaka* 574-406-6800

2017 Takeuchi TL12, s/n 412100463, 1400 Hours, Cab w/AC, Hyd Coupler, Pattern Changer, New Tracks, 84” Tooth Bucket........ ........................................................$52,500

2017 Takeuchi TL12, s/n 412100496, 2200 Hours, CAB W/AC, HYD COUPLER, PATTERN CHANGER, NEW TRACKS, 84" TOOTH BUCKET............................................$50,500

2012 Takeuchi TL250, s/n 225001751, 3190 Hours, CAB WITH HEAT AND AC, CASE CONTROLS, HYD COUPLER, NEW TRACKS, 80" TOOTH BUCKET..........$34,000

2018 Takeuchi TL10, s/n 410002044, 365 Hours, Cab with Heat and Ac, Two Speed, Hyd Coupler, 72" Smooth Bucket ....$55,900

McCann Rents a full line of heavy and light construction equipment. Call us today to supply your next rental.

Schereville* 219-865-6545

Michigan Marne* 616-371-7250

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 7

KPI FT4250CC - ‘14, approx 2000 hrs. 3 bar, Roadtec RP190 - ‘13, approx.. 6200 hrs. EZIV 18’ feeder, xtra cross over conv, magnet, Carlson screed, Moba grade & slope controls .. Moblestar ..........................................$557,000 ............................................................$58,900

GRADALL XL4100 IV - ’15 w/4850 hrs, #C001984 ........................................$195,000

PAVERS / ROAD WIDENERS BOMAG CR662RM - ‘15, 373 Hrs, Material Transfer w/Hopper, #C000763 ............$435,950 Midland SPD-8 - ‘19 w/50 Hrs, hyd. Variable strike-off, #C001697 ..........................$179,800 Midland SPR-6 - ‘18 w/360 Hrs, wash down, hyd. Variable strike-off, #C001737 ......$112,450 P.O.R. items may be on rent causing pricing and hours to vary.

BROOMS Roadtec FB100 - ‘16, approx.. 50 hrs. Front mount, side-shift, A/C ............................$P.O.R.

MILLING MACHINES BOMAG BM600 - ‘16, 182 Hrs, 24” Drum, Load Out Conveyor......................................$184,000 BOMAG BM1200/35 - ‘15, 600 Hrs, 4’ Drum, 3’ Also Available, Front Conveyor, #C000846 ........ ..........................................................$292,852 Roadtec RX-100 - ‘18 w/475 Hrs, 20” drum, #C001554 ..........................................$185,900

ROADTEC RP195 PAVER - ’08, approx. 8890 hrs. Carlson EZIV 10 screed, Moba grade & slope controls....................................$37,500

Grove RT880E – (’14), 80 Ton, 128’ Boom, 56’ Jib, 3,426 hrs, C001236…$469,000

Roadtec RP190E – (’17), 230 HP Rubber Tired Paver, 10’-19’6” Carlson Easy Screed, C002930...$P.O.R.

Liebherr L556 – (’11), 188 HP, 23.5R25EM tires, RC, QC, 4.58 YD bkt, #15360…POR

Manitowoc 10000B-1 – (’13), 75 Ton, 190’ Boom, 60’ Jib, C002371...$749,000

Large Selection of New & Used Equipment in Stock. AGGREGATE EQUIPMENT

EXCAVATORS Liebherr A904C Wheeled Excavator - ‘16, approx 550 Hrs, 2-piece boom, pin grabber coupler, aux hyd ....................................$P.O.R. Liebherr R946 - ‘14, approx.. 800 Hrs, 12’6” stick, QC66 coupler, aux. hyd ................$P.O.R.

CRUSHING AND SCREENING ASTEC GT104 - ‘17, 71 Hrs, 5.25cyd Hopper, 4’x9’ Top & Bottom Screens, #C001154 ............ ..............................................................$P.O.R. ASTEC GT165 - ‘17, 390 Hrs, 5’x16’ Top Deck, 5’x15’ Bottom Deck, 10.5 Cyd Hopper, #C001250 ................................................P.O.R.

ROLLERS Sakai GW750-2 - ‘14, 691 Hrs, Vibratory Pnuematic Tire Roller, #C000533 ......*$99,950 Sakai SW770HF - ‘17, w/930 Hrs, #C001144.... ............................................................$84,900 Sakai SW770HF - ‘17, 450 Hrs, 67” high frequency, #C001168............................$96,000 *Comes with any remaining standard and 3 year extended power train warranty.

Contact Chuck or Jason in Illinois

1-800-307-0221

crhodes@finkbiner.com jzeibert@finkbiner.com

www.finkbiner.com

ASTEC GT205S, (’17), Triple Deck Crawler Mounted Screen Plant. #C003398............................................$CALL EXTEC S5, (’08), Double Screen Crawler Screening Plant, (2) 8’x5’ double deck vib screens, (2) hyd folding wing conveyors, #C002706 ..............................................................................................................................$95,000 JCI K400, (’06), Portable Cone Crusher, 400 HP Elec, 42”x30” Feed Conveyor, #40236 ......................$345,000 KPI FT4250CC, (‘11) Track Mounted Impact Crusher, #C003741 ................................................................$CALL SANDVIK CH430, (‘13) Closed Circuit Cone Plant, 6’x20’ TD Screen, #40230 ......................................$493,000 KPI GT36X80, (‘16) Track Mounted Stacker, #C002294 ..............................................................................$CALL

CRANES GROVE RT635, (’98) 35 Ton Capacity, 105’ Boom, 29’ Jib, SN82072 ....................................................$49,000 GROVE RT650E, (’14) 50 Ton, Tier 4, 105’ Boom, 51’ Jib, #C001600 ..................................................$369,000 GROVE RT765E-2, (’14), 65 Ton, 110’ Boom, 56’ Jib, 2831 Hrs, #C001601 ........................................$389,000 GROVE RT880E, (’13), 80 Ton, 128’ Boom, 56’ Jib, Aux Winch, #C000782 ........................................$459,000 GROVE TMS900E, (’05), 90 Ton, 142’ Boom, 56’ Jib, Aux Winch, #C002264 ......................................$279,000 KOBELCO CK1000, (’01), 100 Ton, 190’ Boom, 60’ Jib, Aux Winch, #C003428 ..................................$219,000 LIEBHERR HS855HD, 100 Ton Duty Cycle Crane, 105’ Boom, (2) Hoist with 20,000 SLP ..................$850,000 MANITOWOC 12000, (‘07) De-Rated 100 Ton, 200’ Boom, 60’ Jib, 3rd Drum, #C002372 ..................$279,000

LOADERS AND EXCAVATORS: LIEBHERR A902 SPEEDER, (‘98) 10 x 20 Tires, 4 Outriggers, Aux Hyd, #C001293..................................$CALL LIEBHERR PR736 LGP, (‘15), 204 HP, 32” Pads, 6-Way Blade, EROPS, #C001941 ..................................$CALL LIEBHERR R954CHD, Super Long Reach Excavator - 42'8" Boom, 32'10" Stick. 70' reach @ Ground Level, #C028565 ....................................................................................................................................................$POR LIEBHERR R946LC, (’14), Long Reach, 60’ Reach at Grade, 2.15 yd bkt. #C000938 ................................$POR

Milwaukee, WI 1-800-236-6900 Fax 414-541-1892

Wausau, WI 1-800-242-7113 Fax 715-675-9748

Crushing & Screening Div. Little Chute, WI 1-800-236-8318 Fax 920-788-6753

For information on our in-stock equipment, contact Park Allison at:

pallison@amstate.com or mobile 1-414-355-1074 or 1-800-236-6900 Visit us at: www.amstate.com

Page 8 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

2015 Bobcat S595 - Call for Details

Bobcat Excavators in Stock, Call for Pricing

Bobcat Toolcats In Stock

Doosan DX140LC Excavator Available for Rent

Largest Selection in the Midwest! ®

Authorized Bobcat Dealer Bobcat 440 ..........................................Starting at $4,500 Bobcat 463’s ........................................Starting at $8,000 Bobcat 542B ........................................Starting at $6,900 Bobcat 642 ........................................................$7,500 Bobcat 642B ......................................................$8,500 Bobcat 743 ..........................................Starting at $8,000 Bobcat 751 ................................Several Starting at $9,900 Bobcat 753 ........................................Starting at $10,000 Bobcat 763F, Series, Open Cab ..............................$11,500 Bobcat 773G, With Heat ......................................$15,900 Bobcat 843, Heated Cab ......................................$10,000

Bobcat 853’s ......................................Starting at $11,000 Bobcat 863, With Heat ........................................$12,900 Bobcat 863G ......................................................14,900 Bobcat 873 ......................................................$17,900 Bobcat S130, 2006, Heated Cab ................................CALL Bobcat S185s, With Heat and Air, 500 Hours to 5000 Hours...... ......................................................Starting at $14,900 Bobcat S250 ......................................Starting at $17,500

Compact Track Machines Bobcat T190’s ....................................Starting at $17,500 Bobcat T200 ......................................Starting at $17,500 Bobcat T250, Gold ................................Starting at $24,500 Bobcat T300 ......................................Starting at $25,000

2015 Bobcat T770 - Call for Details

Other Brands Gehl 4615 Skidloader, Open Canopy ..........................$8,500 Mustang 2105 ......................................................CALL New Holland L175 ................................................CALL John Deere 250/260 Models Available ........................CALL

Excavators Bobcat 331’s, Several w/Heat & Open Canopys .................... ......................................................Starting at $15,900 Bobcat 334 ..........................................................CALL Bobcat 337D, A/C, HT..........................................$35,900 Bobcat 341 ........................................Starting at $29,990 Bobcat 442 ..............................Several Starting at $45,000

Large Used Trailer Selection Starting at $1,500

Authorized Bobcat Dealer

U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857 New Location: Farm-Rite Willmar 1515 West Litchfield Ave. • Willmar, MN 56201 320/235-3672 New Location: Farm-Rite of St. Cloud 810 Mayhew Lake Road N.E. • St. Cloud, MN 56304 844/262-2281

www.farmriteequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 9

ALEX E. PARIS CONTRACTING COMPANY, INC. Route 18 - Atlasburg (Pittsburgh), PA 15004

724/947-2235 Day/Night Fax 724/947-3820 Call Andy Miller Established 1928 Our Greatest Assets .. Our Employees COMPACTORS

OFF ROAD HAULERS

CRANES

Hamm 3412P, 2012, 84” vibratory padfoot compactor, Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD, Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel, EROPS w/ heat & A/C, 1,200HMR . . . . . . . . .$82,500 29.5R25, A/C, 29 cy cap. sideboards, tailgate (currently 10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500 Cat 815F, 2006, EROPS cab, 12’4” S-Blade w/ tilt, new off work), work ready . . . . . . . . . . . . . . . . . .$127,500 Grove RT58C, 1981, down cab, 18 ton r.t., 70' boom paint job, very good condition, 9,400 HMR .$195,000 Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25, anti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500 Hamm GRW-5 Pneumatic Roller, 1994, Deutz Diesel, working everyday . . . . . . . . . . . . . . . . . . . . .$145,000 AIR COMPRESSORS ROPS Canopy, (9) Ea. 7.50-15C1 Tires . . . . .$15,500 Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25, IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL (4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, all A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000 work ready . . . . . . . . . . . . . . . . . . . . . .From $79,500 Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C, SPECIALS Rammax Walk Behind Rollers, over 25 in stock, lever P/S trans, tailgate, work ready . . . . . . . . . . .$115,000 (12) Allmand Light Plants, 2008-2010, diesel, s/a tow& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000 (8) Sheepsfoot, 48" and 60", double drum & single drum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500

Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires, type, (4) MH lights, excellent . . . . . . . . .From $5,200 approx 7,000 hrs, good condition . . . . . . . .$147,500 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,

BACKHOES

P/S trans, working everyday on jobsites . . . .$87,500 Case 580L Rubber Tire Loader Backhoe, 1997, OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500 Cat 336EL, 2012, 33.5” TBG pads, Q/C, aux hyd, 6,700 Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C, HYDRAULIC EXCAVATORS

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$162,500 P/S trans, 26 cy, working everyday on jobsites . . . . . . Cat 336FL, 2015, 33.5” TBG Pads, Q/C, aux hyd, 4,300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000

MISCELLANEOUS

(2) Balderson Broom Attachment for Cat IT Machines,

HMR, work ready . . . . . . . . . . . . . . . . . . . . .$224,500 Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,

8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea. Komatsu PC220LC-8 Longreach, 2011, Young 23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . NUMEROUS Rivinius R600’s, 10’ Wide, Mount on Boom/Stick 60’ reach, 3,500 HMR . . . . . . . .$179,000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500 Dozer Blade . . . . . . . . . . . . . . . . . . . . . . . . . . .$25,500 Kobelco SK210LC, 2007, Q/C, aux hyd, 31.5” TBG Pads, 3,900 HMR . . . . . . . . . . . . . . . . . . . . . .$72,500

DOZERS

ATTACHMENTS

Cat D5NXL, 2006, 10’ PAT Blade, Paccar PA55 winch,

BUCKETS

22” Pads, 4,100 HMR . . . . . . . . . . . . . . . . . .$82,000

Over 100 Excavator, Loader, Specialized &

MOTOR SCRAPERS

Cat 613C Water Wagon, 1994, 5000 gal drop tank, Cat D6NLGP, 2008, VPAT Blade, Drawbar, 33” Pads, ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500 Cat 621F, 1996, Scraper, OROPS, 33.25x2, very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL

9,900 HMR . . . . . . . . . . . . . . . . . . . . . . . . . . .$87,500

Grapple Buckets in Stock -Call For Your Needs FORKS

Cat D6NLGP, 2014, Foldable VPAT Blade, Paccar PA55

(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style, winch, 7,200 HMR . . . . . . . . . . . . . . . . . . . .$142,500 Cat 621E, 1989, Scraper, OROPS, 33.25x29, very nice excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Komatsu D155AX-6, 2007, Sigma S-U Blade, 4-bbl . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL Others Available Call Single Shank Ripper, 8,400 HMR . . . . . . . . .$229,500

Prices Are Negotiable - At Your Inspection

Cat D6TXW, 2013, 13’6” VPAT Blade, Carco 70APS

All Equipment is Owned & Operated By

(2) 48' Box Vans w/Liftgates, Good Condition . .CALL winch, 28” pads, 7,300 HMR . . . . . . . . . . . .$152,500

ALEX E. PARIS CONTRACTING CO., INC.

TRUCKS & TRAILERS

Page 10 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Minimizing Risk: Manufacturers Share Best Practices Over the past several weeks, AEM has developed a list of best practices based on what many of our member companies are doing to keep operations open while minimizing the risks associated with the COVID-19 pandemic. For those looking to either reopen or scale back their operations in the coming months, here are some of the actions and initiatives that can be implemented and shared with suppliers and partners, so as to help ensure a successful transition. “We know our members are taking proactive measures to minimize the risks associated with COVID-19 and doing what they can to keep their employees and their families safe and healthy,” said AEM President Dennis Slater. “Many of our member companies are up and running and taking precautions, and many more will be back in operations soon. We encourage our members to reach out to each other to ask questions and share ideas as work resumes and the pandemic evolves.”

doorknobs, clipboard, pens, keyboard, monitors, etc. It is important to have clear signage reminding staff to wash hands, wipe down areas and to use hand sanitizer. Discontinue use of drinking fountains and/or provide no-touch water bottle filling stations and close off common areas that are not to be used during this time. • Show videos of proper hygiene and area cleaning techniques to reinforce expected procedures. Station monitors showing videos in areas to inform employees of expectation and cleaning techniques in break or cafeteria areas. • Ban community and shared food to promote a healthy working environment and guard against the virus spreading.

Communications • Provide ongoing and frequent communications with all staff, even globally, so leadership can communicate directly with employees, address rumors and share facts. This improves engagement and productivity among For those looking to either reopen or scale back their operations in the coming months, here are some employees, including those curManaging Risks • Understand your shift popula- of the actions and initiatives that can be implemented and shared with suppliers and partners, so as rently working onsite, those worktion to determine how many to help ensure a successful transition. ing remotely and/or those furemployees can work in a designatloughed. ed area while staying 6 feet apart. How This can include adding walk-through tem- areas to keep employees on track for social • Eliminate all non-essential meetings and many of your employees can safely practice perature scans for manufacturing and office distancing. Providing physical cues to show conduct essential meetings and trainings social distancing throughout the workday? employees. Individuals identified as having traffic patterns on stairs and allowing only online via electronic media options such as This includes looking at all facilities and a positive temperature should be sent to a one person per elevator are helpful. Some WebEx, GoToMeeting, Google Hangouts, thinking through areas, such as entrances medical area either onsite or at an offsite stairways can be designated for only up traf- etc. Make sure your IT team provides guidfic and others for only down traffic. Adding ance to employees on the best tools for your and exits, elevators, stairways, meeting location for further testing. • Set up teams and hold daily leadership floor markings to indicate where individuals organization and how to use those tools rooms, lunch rooms and break areas, locker meetings to share information and make can stand during production meetings, clear- effectively. rooms, etc. • Plan for appropriate personal protective needed decisions from the top. Set up appro- ly showing walking areas on the shop floor • Promote wellness via texts and social equipment (PPE) and the amount needed of priate teams to focus on key business areas and using signage in different languages for media to encourage employees to change each for your manufacturing facilities and and have these teams connect daily. Teams your employee base all can be helpful. their personal behaviors that make them • Implement distance checks and adjust more susceptible to contracting COVID-19. office environment. This inventory includes can focus on areas such as COVID-19 premasks and may also include proper gowns paredness, business continuity, operations, office areas to keep office employees sitting Frequent communication using social media internal communications, community rela- at a safe distance from their neighbors in and texting alerting systems can provide and face shields. cubes and in desks. Make sure chairs are sta- needed hygiene reminders and company • Make sure all employees working onsite tions/public relations, etc. tioned 6 feet apart in conference rooms and announcements and new procedure implehave travel permits/letters from the company so they can travel to work per the essential Onsite Facility, Office Procedures, capacity numbers are prominently dis- mentation. Space Planning played. Dividers or walls should be installed business rulings. It is important to be aware The current COVID-19 pandemic is hav• Set up procedures for entrances and exits for open concept areas and adjustments may ing a tremendous impact on the equipment of regulations and rulings of each state to help employees manage opening doors be needed to use new spaces for desks. Map manufacturing industry, its suppliers and where there are operations. • Provide guidance on employee and pub- and passing others in hallways and on stair- traffic patterns in the office areas using tape customers, as well as the agriculture, conlic transportation to keep employees safe and cases. This includes adjusting to allow only or floor markings to divide hallways and struction and utility sectors. protect them from bringing the virus to work one person to enter/exit at a time, creating indicate walking direction as needed. AEM’s top priority the health and safety and home. This requires reminders of social visual signs for social distancing and providof our member companies, their employees Hygiene, Disinfection distancing and disinfecting their seating area ing nearby hand sanitizers. Adding foot pulls and our partners. We hope that these best • Train staff on proper hygiene procedures practices for how to mange the COVID-19 on buses and trains, tips for disinfecting cars and forearm pulls to allow for easy, handand motorcycles, as well as avoiding car- free door openings will help to avoid touch- and expectation to minimize infections. pandemic will help our member companies ing door surfaces. Clean down and wipe all surface areas dur- protect the health of their employees, mainpooling and sharing rides. • Map out traffic patterns such as stair- ing a change in shift or workforce. This tain their productivity and get back to full • Implement thermal screening at entrances to minimize spreading the virus. ways, hallways and shop floor common includes anything touched, such as handles, operations in the coming months. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 11

NORTH DAKOTA TA Williston 701.577.1249 Bismarck 701.250.4882 Fargo 701.271.2360 TENNESSEE Kno oxville xville 865.525.1845 Chattanooga 423 308 7940 423.308.7940 NORTH CAROLINA Asheville 828.687.0620 Charlotte 704.596.8283 Greenville 252.754.5280 Raleigh 919.661.8710 SOUTH CAROLINA Piedmont 864.704.1060 Columbia 803.791.0740 Charleston 843.414.1120 GEORGIA Buford 678.318.9500 Savannah 912 964 8079

POWERFUL EXCAVA AVATORS FOR YOUR TOUGGHEST JOBS. JOBS

Macon 478.200.3300

Sttay up and running with high-quality machines m and unrivaled support. Exp perience reliable power, power efficiency and performance from m the industry’s industry s best cabs. cabs Our Volvo excavators are e designed to reduce fuel consumption and maximize uptime to help you lower your operating costs — and d you can work confidently knowing your Ascendum team is always there when you need us. Talk T alk k to t us today and learn how Volvo excavators can deliver more reliability on the job and boost your botttom line. Contact your nearest Ascendum location today.

ascendummachinery.com ascendummachinery.c . om .c

Page 12 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

GARY CARLSON EQUIPMENT CO. 1380 WEST COUNTY ROAD C ROSEVILLE, MN 55113

GARY CARLSON EQUIPMENT 10630 NASSAU STREET NE BLAINE, MN 55449

www.garycarlsonequip.com PHONE: 763.792.9123 X 102 CELL: 651.755.5426

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 13

JD 750J, LGP, 156” PAT Blade, 34” Pads, #110776............$77,750

JD 544K, Coupler, Ride, JD 410E, 40 Ton, JD 644K, Cab, Air, QC, JD 750K, LGP, 156” GP Bucket, #111470 .... Tailgate, Warranty, 3 Spool Aux, #108584 .. PAT Blade, 34” Pads, ........................$99,000 #116045..........$224,000 ......................$134,000 #115888..........$114,500

JD 200CLC, 9’ 6” Arm, 32” Pads, #101510........ ........................$72,500

Case 865, Low Cab, 14’ JD 160GLC, 10’2” Arm, JD 350DLC, 10’6” Arm, JD 210GLC, 9’7” Arm, Aux Hyd, #108809 ........ 32” Pads, Hyd Thumb, Blade, #116814 ............ 24” Pads, Hyd Thumb, ........................$39,500 #112819..........$114,500 ......................$104,000 #112879..........$129,500

JD 772G, Tall Cab, Air, 14’ Blade, #93273 ........ ......................$119,000

NPK Hammers, All Sizes for All Makes. JD 700J, LGP, 30” Pads, JD 744K, Cab, Air, Inspected and Coupler, GP Bucket, 132” PAT Blade, Well-Maintained, #106080 ..........$89,750 #111720..........$139,500 GH4 – GH18

JD 672G, Low Cab 14’ Blade, #102755 ............ ......................$134,000

Bomag BW177DH-40, JD 710J, Cab, Air, 4x4, JD 750J, LGP. 156” Harlo HP6500, 4x4, 66” Smooth Drum, Ext Hoe, Aux Hyd, PAT Blade, 34” Pads, 6500lb Cap, 22’ Mast, #117165..............$69,500 #102869 ..........$59,500 #110776............$77,750 #117350 ............$56,000

JD 310SK, Cab, Air, 4x4, Ext Hoe, Aux Hyd, #106433 ..........$54,500

Page 14 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

RDO Equipment Opens Full-Service Store in Dayton, Minn.

The Dayton store is conveniently located at 11030 Holly Ln., directly adjacent to Interstate 94 and the 610 interchange.

Just in time for the busy summer construction season, RDO Equipment Co.’s new, full-service store in Dayton is open. The Dayton store is the result of an integration between two previously separate stores in the area and is designed to better meet the equipment and technology needs of customers in the north metro area. The new 45,000-sq.-ft. store combines the parts support of RDO’s former Brooklyn Park location and the Topcon technology focus of its former store in Bloomington. “This new store came about as a result of listening to our customer needs and responding to the market conditions,” said John Weber, general manager. “Our customers wanted the efficiency of a total solutions experience in one location. The Dayton store is built to do just that.” Serving customers in the construction, environmental, roadbuilding, surveying and underground industries, the Dayton store has the space and breadth to service customer needs for John Deere, Vermeer and Topcon equipment. Features of the new store include: • Large showroom with dedicated space for Deere and Vermeer

Features of the new store include $2M in parts inventory.

equipment • $2M in parts inventory • 16,000-sq.-ft. service shop to accommodate all makes and models of equipment • Separate 1,100-sq.-ft. service area devoted to Topcon technology In addition to expanding RDO’s footprint to support the John Deere and Topcon customers in the area, Steve Rosenow, Midwest regional Vermeer general manager said that the new store is a testament to the increase in RDO’s Vermeer business, as well as Vermeer’s continued growth and expansion of its product line.

“The addition of the Dayton store allows us to be closer to our customers and better support them with equipment, parts, and service,” he said. According to Kelly Gress, the region’s vice president, the team is eager to serve customers’ full equipment, parts and service needs, while remaining committed to following the state’s guidance for health and safety. As with all RDO locations, he said the Dayton store is compliant with safe social distancing and hygiene practices recommended by the CDC, including 6-ft. distance barriers at the

RDO Equipment Co.’s new, full-service store in Dayton includes a 16,000-sq.-ft. service shop to accommodate all makes and models of equipment.

parts counter and curbside parts pickup; limited points of entry; and thorough daily cleaning. In addition to creating new opportunities for customers, the RDO Dayton store brings approximately 50 jobs to the area including parts, sales, service and administration. There are still a few positions open. Those interested in joining the RDO team may visit the RDO Careers website to learn more: rdoequipment.com/careers. The Dayton store is conveniently located at 11030 Holly Ln., directly adjacent to Interstate 94

and the 610 interchange. Completing RDO’s footprint of full service for customers on both the north and south ends of the metro, there also are two existing RDO stores in neighboring Burnsville. One is dedicated to Vermeer industrial and tree care equipment, parts and service. The other features John Deere equipment, parts and service, and now further integrates Topcon technology and support. A grand opening is planned for next year. For more information, visit rdoequipment.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 15

#80639 2002 CAT 140H VHP, CAB | A/C | 14’ MOLDBOARD | 5,500 HOURS................$135,000

#92776 2014 TAKEUCHI TL12, CAB | A/C | HEAT | HIGH FLOW UNIT | 2,100 HOURS ........$50,500

#83226 2016 KOMATSU HM300-5, CAB | TAILGATE | 2,100 HOURS..........CALL FOR PRICE

#82962 2014 KOMATSU HM400-3, CAB | TAILGATE | AUTO GREASER | 3,800 HOURS ........ ..................................................CALL FOR PRICE

#92483 2012 KOMATSU PC490 LC-10, CAB | A/C | AUX HYDS | JRB QC | 6,300 HOURS .......... ..............................................................$179,500

To See More Machines, Please visit us online at www.bobcat-ent.com

Page 16 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Call Brad Kent at 513-266-7761 or on our USED EQUIPMENT HOTLINE: 888.BOBCATS

2015 S590 Bobcat Loader, 1500 Hrs, Cab Heat & Air, Power 2015 S590 Bobcat Loader, 800 Hrs., Cab Heat & Air, Power 2019 S70 Bobcat Loader, Only 15 Hours, Cab & Heat, CN 115524 ..............................................................................$16,900 Bobtach, Keyless, CN 112551 ......................................$32,500 Bobtach, 2 Speed, CN 109188 ......................................$34,000

2016 S650 Bobcat Loader, 700 Hrs., Cab Heat & Air, 2 Speed, High Flow, Keyless, CN 117793........................$33,000

2015 S650 Bobcat Loader, 1800 hrs., Cab Heat & Air, 2017 T590 Bobcat Track Loader, 575 hrs., Cab Heat & Air, 2018 T750 Bobcat Track Loader, 450 hrs., Cab Heat & Air, 2 Power Bobtach, High Flow, CN 108157 ....................$35,000 Power Bobtach, Keyless, CN 116210............................$42,000 Speed High Flow, CN 118368 ........................................$52,500

2015 DX225 LC-5 Doosan Excavator, 500 Hrs, Includes Quick Coupler, and Bucket, CN 94483 ......................$146,695

PRE-OWNED, JOB READY EQUIPMENT NOW AVAILABLE! Parts • Sales • Service • Rental • Training Cincinnati • Mt. Orab • Hilliard • Reynoldsburg • Lexington • Louisville

NDDOT Wins Perpetual Pavement Award CUSTOM MADE PRODUCTS Scrapers, Rollers & Graders

For Sale & Rent SIXTEEN LOCATIONS IN IOWA, NEBRASKA, & WISCONSIN

CALL ANYTIME 24/7

515-332-1875 Visit our website @ www.gncmp.com

The Asphalt Pavement Alliance (APA) announced that the North Dakota Department of Transportation (NDDOT) has won a 2019 Perpetual Pavement Award (PPA) for an 11.3-mi. section of North Dakota Highway 5 in Pembina County. This is NDDOT’s first PPA. To qualify for this award, a pavement must be at least 35 years old and never have experienced a structural failure. The average interval between the resurfacing of the winning pavement must be no less than 13 years. The pavement must demonstrate the characteristics expected from long-life asphalt pavements: excellence in design, quality in construction and value for the traveling public. Engineers at the National Center for Asphalt Technology (NCAT) evaluated the nominations and validated the winners. Built by NDDOT in 1953, the award-winning section of ND 5 runs from reference point 302.001 to reference point 313.257. The original construction consisted of 5 in. of aggregate base; 2 in. of stabilized base; and 2.5 in. of hot bituminous pavement. In 1983, the project was overlaid with 2.5 in. of hot bituminous pavement, followed by the placement of 1.5 in. of hot bituminous pavement in 2002. In 2015, the project was milled to a depth of 2 in., followed by the placement of 2 in. of a Superpave mix. Today, ND 5 has an average daily traffic (ADT) volume of 1,399 vehicles, 14 percent of which is trucks. Since its construction, ND 5 has carried approximately 3 million equivalent single-axle loads (ESAL). The road has performed well during its 66 years of use. Resurfaced three times, ND 5 has exceeded the minimum average interval of 13 years required to win the PPA. “We at the North Dakota Department of Transportation

are honored to receive this national recognition for top quality pavement and preservation work in the eastern part of our state,” said Bill Panos, NDDOT director. “North Dakota Highway 5 has supported the movement of agricultural commodities, freight and manufactured products for more than 66 years. We are proud North Dakota’s transportation system is among the best in the nation. This award highlights the commitment our department and employees have to deliver outstanding projects and provide a system that safely moves people and goods.” As a winner of a 2019 PPA, NDDOT will receive an engraved crystal obelisk, and its name and project will be added to a permanent plaque that is kept at NCAT. “One of the keys to sustainability is long life,” said Amy Miller, executive director of the APA. “Asphalt roads can be engineered to last indefinitely with only routine maintenance and periodic surface renewal. “The advantages of these perpetual pavements are significant. Life cycle costs are lower because deep pavement repairs and reconstruction are avoided. User delays are reduced because minor surface rehabilitation requires shorter work windows and can avoid peak traffic hours. And there are environment benefits because minimal rehabilitation, combined with recycling any materials that are removed from the pavement surface, reduces the amount of material resources required over the pavement’s life.” The Asphalt Pavement Alliance is a coalition of the National Asphalt Pavement Association, the Asphalt Institute and the state asphalt pavement associations. The Asphalt Pavement Alliance’s mission is to establish asphalt as the preferred choice for quality, performance and the environment. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 17

Sales • Rentals • Parts • Service • Financing ncing

2016 Komatsu D65PX-18 KM16294X $219,500 3,509 hrs.

2018 Komatsu K WA500-8 A500 8 A

2015 Wirtgen i n WR200XLI

KM18423X $369,500 9004 hrs.

WR150 004X $299,500 2,300 hrs.

2006 Komatsu D41E-6 D

2014 Komatsu u D39PX-23

3,90 04 hrs.

KM14199X $89,500 2,300 hrs.

2014 Caterpillar C erpillar illar D6T XW CT T14025X 2,600 hrs.

$219,750 50

2014 Komatsu PC36 60LC-10 KM M14056X 5,500 hrs.

$132,50 00

2013 Caterpillar 32 20E

2014 Deere 250G 2

2015 Komatsu su WA270-7 A

2016 Kom matsu WA470-8 A

CT13008X $102,750 6,288 hrs.

JD14001X $127,500 2,9900 hrs.

KM15410M $114,500 3,900 hrs.

KM M16433X $152,00 00 7,045 hrs.

2014 Kawasaki 80Z 7

2017 Deere 31 10LEP

2017 Caterpillar pillar 963K

2014 LeeBoy 8510C

KC14029X $59,500 12,046 hrs.

JD17010J $69,500 855 hrs.

CT1700 01X $239,500 3,248 hrs.

LB B14006X $79,500 00 2,217 hrs.

20 015 Komatsu PC C138USLC-10 KM15152X 3,610 hrs.

$109 9,500

2017 Deere 644k JD17003X 7,094 hrs.

$119 9,500

2015 K Komatsu HM400-5 KM15268M 6,500 hrs.

$459 9,500

All sales are subject to availability at time of order, prices do not in nclude taxes or other applicable fees. Kirby-Smith Machinery Inc. doesn’t engage in exports to embargoed countries. untries. Sold As Is Where Is.

Abilene • Amarillo • Dallas • Ft. Wo orth • Ka ansas City • Lubbock • McAlester • Odessa • Wa aco • Oklahoma City • St. Louis • Tulsa

Contact Terr e ry y Ly yness fo or details and a pricing. g. Follow us on

877 549 877.549 9 7501 9.750

www.kirby .kirby-smith.com smith.com th.com

Page 18 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Southeastern Equipment Announces Retirees, MVP Award Southeastern Equipment is saying goodbye to two long-time employees: Jerald (Herbie) Denius, truck driver, retired in June, and Chip Cropper, regional manager, retiring in July. Cropper also has been awarded Southeastern’s MVP Award. Chip Cropper Caps Off Career as MVP Southeastern Equipment announced Chip Cropper as the recipient of this year’s Most Valuable Person Award. The annual award is one of the company’s most prestigious accolades. Winners, who are nominated by their colleagues, demonstrate the highest commitment to teamwork and the company’s core values: helpfulness, thoughtfulness, capability and loyalty. “Chip has held many roles with the company and been a great mentor to many associates during his 30 years with Southeastern,” said Mickey Gourley, president of Southeastern Equipment. “We can’t thank him enough for his leadership and loyalty.” The challenge of learning a new role is nothing out of the norm for Cropper. After graduating from Kent State University with a degree in aerospace technology (Air Force ROTC), he worked as a pilot for an aviation service. In that role, he was the designated corporate pilot of the Southeastern management team as they expanded the business beyond Ohio. In 1990 he decided to make a career shift, and Southeastern offered him a job. “They probably figured if I screwed up, I could always fly the company plane,” he said. Over the past three decades, he’s held numerous positions including credit manager, parts and service manager, governmental sales representative and his current role of regional branch manager, overseeing Perrysburg, Novi, Mansfield, Holt, Brunswick, Mentor and North Canton. “My aviation background made the transitions a lot easier,” said Cropper. “But at the end of the day, this is a people business. That’s always been the most important part of any role I’ve had.” It’s also been the most rewarding.

“The thing I’ve enjoyed most is mentoring and coaching people. I had great mentors at Southeastern who were always generous with their time and showed me the ropes. So, if I’ve had any small part in helping encourage someone else’s success, then that would be very humbling and satisfying.” According to his colleagues, Cropper has done exactly that. Many of his MVP nominators praised him for leading by example, as well as his personal and professional support over the years. As he retires in July, he takes with him the admiration and gratitude of all

(L-R): Herbie Denius, truck driver; William L. Baker, CEO and founder; and Chip Cropper, regional manager. Denius and Cropper are retiring this summer.

admiration for company founder Bill Baker and the leadership team. “I thank Mr. Baker and the team for what they accomplished over the 48 years I’ve been here,” he said. “We never missed one paycheck. That’s not something a lot of other companies can say today.” Throughout his career, Denius’s commitment, can-do attitude and fun-loving sense of humor have served Southeastern — and its customers — very well. “Herbie is and always has been one of the hardest workers and most dedicated people I’ve had the privilege to work with,” said Heath Watton, vice president of sales. Denius’s supervisor, John

Mihalik, Cambridge operations manager, agreed. “Herbie’s a great associate with a great work ethic. But more than that, a great person who will be very missed.” June also marks Herbie’s 50th anniversary with his wife, Janice. They have a son (Shawn), a daughter (Melissa), three grandchildren and a great grandson he looks forward to spending more time with. “This month I turn 72, celebrate my 50th wedding anniversary, and retire from my job. I’m not sure I can handle all the excitement,” he said. “I’m going to miss the people most of all. But at 72, you start thinking it’s time to just enjoy life.”

William L. Baker (L) congratulates Herbie Denius on his retirement.

About Southeastern Equipment Company Southeastern Equipment Company has been selling, servicing and renting heavy machinery since 1957. The company has 18 locations throughout Ohio, Michigan, Kentucky and Indiana. Manufacturers represented by Southeastern Equipment Company include: Case Construction, Kobelco, Bomag, Gradall, Kubota Construction, Mauldin Paving Products, Etnyre, Vacall, Schwarze, Eager Beaver Trailers, Superior Broom, Fecon, Skytrak, JLG, Sullair, Werk Brau and several others. For more information, visit southeasternequip.com. 

Chip Cropper (L) and William L. Baker discuss Cropper’s MVP award and upcoming retirement.

those whose lives he’s touched. “This award is a fitting tribute to Chip’s character, experience, mentorship and commitment to his team and our customers,” said Thor Hess, executive vice president. “He will be greatly missed and long remembered by all of us in the Southeastern family.” Jerald (Herbie) Denius Retires After Nearly One Half-Century One of Southeastern Equipment’s longest-serving associates retired on June 19. Jerald (Herbie) Denius has worked as a Southeastern truck driver for 48 years, hauling and delivering heavy equipment orders to the company’s branch locations across Ohio. A U.S. Army veteran, Herbie joined Southeastern in 1972 as an equipment steamer at the Cambridge Branch. Later he moved to driver and has called it home ever since. “To give you an idea of how

long it’s been, I started out at $1.95 an hour,” he said. “Of course, gas was only 35 cents a gallon back then.” Denius said being part of Southeastern’s incredible growth over the past five decades has given him a lot of respect and

USE S D EQUIPMENT .com

TRUSTED MACHINES FROM A TRUSTED DEALER. R

2012 CASE SV300, ID# SGU0136, SN NCM445322, 2433 HOURS ................................................................$21,500

2016 CATERPILLAR 299D2, ID# 6CR5996, SN FD201319, 3311 HOURS ..........................................$43,500

2008 CATERPILLAR 246D, ID# SUC0420, SN JAY01206, 1863 HOURS ............................................$16,900

2016 CATERPILLAR 289D, ID# TUC0047, SN TAW04174, 2722 HOURS ........................................$42,100

2015 CATERPILLAR 950M, ID# RUC0220, SN EMB00683, 4843 HOURS ........................................$137,600

2009 CATERPILLAR 938H, ID# SUC0351, SN MJC00680, 17066 HOURS ........................................$44,800

2014 CATERPILLAR D8T, ID# QUC0061, SN FCT01311, 5459 HOURS ........................................$342,400

2005 CATERPILLAR 613C, ID# SUR0005, SN 8LJ02797, 2365 HOURS ..........................................$188,100

2015 CATERPILLAR TL1255, ID# 4AR8246, SN DHW01396, 4332 HOURS........................................$79,670

2015 CATERPILLAR TL1055C, ID# 5AR8432, SN KDE01592, 4447 HOURS ..........................................$79,950

2017 CATERPILLAR 745C, ID# TUC0023, SN TFK01416, 5360 HOURS ........................................$309,900

1998 CATERPILLAR TH63, ID# 20B014, SN 5WM02186 ....................................................................$19,500

2012 CATERPILLAR CS54B, ID# TUC0055, SN L4H00114, 4300 HOURS ..........................................$59,700

2012 CATERPILLAR 12M2, ID# SUC0208, SN F9M00145, 5825 HOURS ..........................................$93,700

2017 CATERPILLAR 305.5E, ID# 7CR6400, SN CR503934, 1060 HOURS..............................................55,410

2011 CATERPILLAR 1402AWD, ID# TUC0027, SN M9J00444, 8330 HOURS ............................................$99,900

Page 20 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

0% 48 FOR

SKID DS & TRRACKS Offer expires 06.30.20

MONTHS

CONTTACT ACT YOUR LOCAL M MUSTTAN ANG BY MANITOU DEALEER TODA AY! Y!

SAVE TIME • SAVE MONEY SAVE LABOR • SAVE OIL

• • • • •

no tools required no expensive hardware needed no more rags stuffed into hoses no more messy plastic caps The ultimate contamination control tool • one hand installation • Eliminate hydraulic oil spills & clean up • Quick installation & ease of usage • Safe for personnel & environment • Industry acclaimed • 100% made in USA INTRODUCING FlangeLock Tool Boxes TM

4 Tool Boxes Available

All Include Slugs and O'Rings.

For more information contact Mike Pearl at 914.980.8890 or email mike @ flangelock.com

www.flangelock.com

STAR EQUIPMENT LT D .

www.STAREQUIP.com 2950 6TH STREET Sw 1401 2nd AvEnUE dES moInES, IA 50314 cEdAR RAPIdS, IA 52404 (515) 283-2215 (319) 365-5139 (800) 369-2215 (800) 728-5139 2625 w. AIRlInE Hwy. wATERloo, IA 50703 (319) 236-6830 (800) 791-9249

2100 E. lIncoln wAy AmES, IA 50010 (515) 233-9500 (866) 856-2312

YOUR Y OUR ST TABLE ABLE

WORKHORSE

NDOT Shares Fremont Plans The Nebraska Department of community to build projects that support Transportation (NDOT) announced con- economic vitality and improve the quality of struction on the Fremont Southeast Beltway life for Nebraskans. Without Fremont’s partcould begin as early as July 6 due to financial nership and support from Lincoln Premium support from the Fremont community. In Poultry this project wouldn’t be happening.” 2018, the project was fast tracked and moved NDOT and Fremont agreed upon an inifrom the 2024 construction season to 2020 due to the growing need to improve mobility and sup- “The Fremont Southeast Beltway port truck traffic associat- project is a great example of ed with economic growth of the region. The award what we are focusing on at the of the contact is the final step in securing a con- Department.” Kyle Schneweis struction schedule for the Nebraska Department of Transportation project. The acceleration of the project timeline would not have been possible without financial support tial investment of $20 million based on a from the city of Fremont, Dodge County and projected project cost of around $43 million. local businesses. In total, $30 million is Refined estimates for the project confirmed being provided by the Fremont community increased construction costs and based upon to expand the local infrastructure system to a bid of $62 million, Fremont, Dodge support new and existing regional economic County, Lincoln Premium Poultry, expansion. Wholestone Farms and Fremont Beef agreed “The Fremont Southeast Beltway project to invest an additional $10 million in the is a great example of what we are focusing project. on at the Department,” said NDOT Director For more information, visit Kyle Schneweis. “Partnering with the local dot.nebraska.gov. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 21

Contact Rollie Aspenson (Used Equipment Manager)

at 608-220-1723 or Lewis at 608-837-5141 ext. 1019

We have the equipment you need for rent or ownership and the most cost effective, technology driven solutions available.

Six Locations in Wisconsin to serve you! Sun Prairie (Madison) • Milwaukee • De Pere (Green Bay) • West Salem (La Crosse) • Plover (Stevens Point) • Mt. Pleasant (Racine) 2012 CATERPILLAR D6T

2013 JOHN DEERE 450J

2018 JOHN DEERE 850K WT

Stk #C94476, Cab w/ AC, Lever Steer, Low Ground Pressure, 32" Pads, Torque Convtr Trans, 165" Blade, Ripper, 6515 hrs ........................$165,000

Stk #C94120, ROPS, Low Ground Pressure, 24" Pads, Power-Angle-Tilt, 115" Blade, 1540 Hrs .......... ..............................................................$59,500

Stk #932924, Well Maintained Rental Fleet Unit, Semi U Blade, 349 Hours ......................$243,000 WITH WARRANTY

2015 JOHN DEERE 160G

2015 CATERPILLAR 323F

2014 CASE CX160

Stk #C91695, Cab w/ AC, Long Arm, Standard Boom, Long Track, Wide Pads, 28" Pads, Aux Hydraulics, Coupler, Less Bucket, 1601 hrs ..............$139,900

Stk #C94159, Cab w/AC, Cntrl Pattern Select, Long Arm, Standard Boom, Wide Pads, Aux Hyds, Coupler, Hyd. Thumb, 42" Bucket, 1971 hrs ........$169,000

Stk #C94521, Cab w/ AC, Medium-Long Arm, Std Boom, 24" Pads, Aux Hyds, Coupler, Hydraulic Thumb w/ 48” Bucket, 5840 Hrs..........................$78,500

2017 JOHN DEERE 672GP

2015 JOHN DEERE 624K

2010 JOHN DEERE 710J

Stk #C93381-2, Cab w/ AC, Tall Cab, EH Controls, 14' Blade, 17.50 Tires, Radials, AWD, Aux Hyds, Front Scarifier, Ripper, 1489 hrs ............$249,000 WITH WARRANTY

Stk #C91780-2, Cab w/ AC, Quick Coupler, Ride Control, Dual Diff Locks, 20.5 Tires, General Purpose Bkt, 1940 hrs ..........................$147,000 WITH WARRANTY

Stk #C94615, Cab w/ AC, Pilot Controls, 2WD Power Shift Tran, Ride Control, Less Bucket, 21L Tires, 2754 hrs ......................................$38,000

www.brookstractor.com

Page 22 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Mammoet Lowers Joe Louis Arena’s Main Roof Truss Mammoet prepares to lower the main roof truss.

Mammoet lowers the main roof truss onto client supports.

In the center of downtown safety of those involved. Detroit, Mich., a retired hockUltimately, the team effort to ey arena stood in the way of lower the truss in a single the development of a section piece proved to be a safer of land on the Detroit River at method than the beam by the border of the United beam demolition, while proStates and Canada. To help viding more control during facilitate the demolition of execution. this arena, Mammoet was Richard M. Adamo, presicontracted to lower the main dent of Adamo Group Inc., roof truss of the Joe Louis elaborated on his experience Arena. working with Mammoet, “I Due to the arena’s proximwould recommend Mammoet ity to a neighboring metro to other contractors as they center and a large underdisplay real professionalism ground sewer main which ran on the job. The team is very beneath the truss, the demoliengaged and willing to overtion required a traditional disMammoet is lowering the roof truss; ends have been removed for come obstacles collectively mantling method rather than and come up with solutions. clearance. implosion. With safety being of parasafely lowered it to 20 ft. (6 Mammoet utilized eight strand mount importance on this project, Mammoet’s client, Adamo m) so that the client’s equip- jacks for lowering and two pairs of and sensitive in nature due to the Group Inc., was challenged ment was able to reach the 8-ft. (2.4-m) tall girders, braced close watch of the public’s eye, with the removal of the roof truss to cut it into smaller, together, to support the roof. With Mammoet took all necessary pretruss structure and the original more manageable, pieces. so many jacks connected to one cautions. It was a wonderful expeapproach was to dismantle Due to the lack of detailed rigid piece, the Mammoet team rience working alongside this the truss at height beam by Beams are ready to be lifted to the truss. information about the truss had to carefully monitor the truss team.” beam. However, Mammoet proposed lowering the entire roof be removed but also the last. The and its weight, a lifting procedure during lowering to ensure that both “The Joe,” as it is affectionately truss structure in a single piece roof truss itself was 440 ft. (134 m) was developed with input from the truss and the lifting equipment referred to by locals, opened in where it could be more easily long and consisted of steel con- field supervisors and engineering were loaded as designed. 1979 and hosted numerous Detroit struction with concrete decking to lift the truss free while still Within four hours of the ends Red Wings hockey games, sportaccessed for further dismantling. allowing the operation to be safely being cut free, Mammoet’s team of ing events and concerts before This method would require a weighing 2,480 tons (2,250 t). To lower the truss without jeop- aborted should the weight of the six had successfully completed the holding its final event in July 2017. coordinated effort by Mammoet personnel and specialized equip- ardizing the existing nearby infra- truss be greater than that originally lowering of the truss and set it on The arena that housed more than the client’s shoring piles. ment working alongside Adamo’s structure, Mammoet proposed estimated. 20,000 spectators per event is On the day of the lowering, the During both the planning phase named after a former heavyweight experienced demolition team to placing large beams underneath bring down the truss within a nar- the truss to lift the structure from its Mammoet team lifted the truss to of the project and the execution, champion boxer, Joe Louis, who row window of acceptable weather existing supports and lowering the verify its weight and, once deemed both parties worked together to grew up in Detroit. In the future, piece onto supports using strand acceptable, the client removed the ensure that all work needed to developers aim to revamp the area conditions. ends of the truss to provide clear- lower the roof truss could be for mixed-use development. The main roof truss, which con- jacks. The starting height of the roof ance to lower it past the existing accomplished in minimal time and tained the arena’s penthouse, was For more information, visit without any compromises to the mammoet.com.  not only the largest component to was 85 ft. (25 m ) and Mammoet supports.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 23

563-8 872-4 4112 112

Bellevue (Dubuque), Iowa sales@jjjscheckel.com RENT OR

BUY!

2005 CA ATT D10T - $388,000 $3888,000

2006 CA ATT D10T - $$358,000 ,

2015 CA ATT D8T - $328,000 ,

2010 CA ATT D9T - $$175,000

RJG S#, 1 Owner since new w,, LLow to midlif idlifffee componen p t RJG S#, 1 Owner since new, Low too midlife dl f componen p t Easyy duty ppower plant machhhine. 49,000 Total ,861 at at idle dl , only l 4,539 actual T l hours, 6,400 total frame hrs, 1,861 hours, SS ripper pp r,, U blade, blade Tw Twin tilt, Well maintained, i i d hours, SS ripper p atingg hrs. SU Bladee, MS Ripper pp r,, EErops rops, DDiff iff steerr,, d pp r,, U blade blade, Twin Twin tiltt, Well maintained, 30,206 were in neutrral. SU Blade, Rear cwt. oper 30 206 hhours w i h and reputable machine. Priced to sell. Clean, straight, Clean, straight, P i Service history i new. Rent/Buyy.. O i i l Paint, Original h since Selling wholesale, no work orders performed. h and reputable macchine. Priced to sell.

RENT OR

BUY!

1996 CA ATT D8R - $128 $128,,000 0

2005 CA ATT D8T - $228,000 ,

8,200 Hours, Lififfetime etime ser servicee history, h y, Topc p on GPS comes with machine chine, MS ripper pp r,, SU blade blade, Excellent d Ex undercarriage, Original O l paint, i as nice as they come.

RENT OR

BUY!

2015 CA ATT D6T LGP P,, VPAT - $$248,000 , 2012 CA ATT D6T XW VPAT - $165,000 $ , 2012 CA ATT D6T LGP VPAT - $148,000 $ ,

2009 CA ATT D6T XW - $148,000 A $ ,

Low hours on powertrain rebuild, SU blade, Drawbarr,, 4,315 Hrs, 1,308 Idle hrs, AROO CAT AAccugr g ade d GPS ready dy,, 6,250 Hrs, 1,472 idle, ARO CAT CAT Acc A ugr g ade d GPS Ready. 8,500 Hours, 2,700 at idle. CAT Accugr g ade, d ARO ARO, GPS 5,520 hours, SU blade w/ tilt, M Multi l shank h k ripper pp r,, Open canopy bll d . Straight S ih O i i l condition, di i Op py,y, Diff D steerr,, Excellent Ex undeercarriage, Rear ripper pp r,, Er E ops p , A/C, Diff steerr,r, VPPA PAT 6 wayy blade d, Erops, A/C, Diff Steerr,, VPAATT 6-way 6-w y blade readyy. Erops ready rops p , A/C, Diff steerr,, GGoodd undercarriage g . Erops p , A/C, Diff stteerr,, Hood H sweeps p . Original Reputation Machine and clean. Rent//Lease or Buy Original, machine Rent/Lease or BBuyy.. since new. i machine from midwest dirtt contractorr.. M hi iis goodd as they come. Reent/Lease or BBuy. B y.. i l super clean machine. OOriginal paintt. Dealer service history h

RENT OR

BUY!

2016 CA ATT 390FL - $580,000 $5800,000 ,

6,500 Hrs, Reputa p tion 1 owner unit, 188’ Stick, S i k QQuick l r,, 66”” Bucket. coupler B Excellent conndition. Rent/Lease or Buyy..

RENT OR

BUY!

2013 CA ATT 329EL - $139,000 $1399,000 ,

4,700 Hours, New 54”” bucket bbuckk , 10’6”” SStick, i k Fullyy

loaded, Longg and Wide UC, Pattern changggerr,, Excellent Ex ll

condition, OOriginal paint. Rent/Leas /L se or Buyy..

BUY!

JJScheckkel.com 2015 CA ATT 390FL - $448,000 ,

1,823 Hrs on dealer l engine gi rebu b ild, RReputation, 1hi 10,150 10 150 Total T l houurs, Super owner machine, p straigh g t, Clean, original. 9’7”” Stick, S Hyd cnttrwgt., 96”” BBucket. k

for detailed d photos, p videos id s,, andd d descrip iptions!

2015 CA ATT 980M - $228,000 $ ,

2011 Deere 844K 4K - $98,000 ,

9,614 Original g Hrs, AAgg ggrega g te han h ndler dl pkkg, M Matchingg 9,6722 Hrs, H M Matching hi g Bridge idg stone RRadials, di l 1 Ownerr,, di l 7 YYdd. GP bbucket, b Michelin radials, k Rid ide control, On board Original g ppaint, 7 Yar Yardd GP bucket, buck Ride control, scale. Clean. Good history. Rennt/Lease or Buyy.. Deere dealer andd tested. Nice machine! d l inspected i

RENT OR

BUY!

(5)2014 CAT 740B’s - $248 2 ,000 EA. 66,500 500 Hours, Original paint, Service hhistory, Oil samples l , Fullll workk orde d r complet l edd. Goodd tiri es, Work ready. Rent//Lease or Buy.

WE OWN WHA ATT WE W ADVERTISE!

RENT OR

BUY!

Pkg. 0 hr Powertrain w/ 3yr/5,000hr OEEM CAATT wrnty. New U/C. Pre-emissions, U-blade, Erops, Diff steerr..

2012 Komats atsu PC800LC-8 P - $388 $388,000 2006 Komattsu PC800LC-8 - $36 $368,000 ,

Reputa p tion 1-owner machine, machine Full history since new w,, 7,200 Original g hrs, Reputa p tion machine, Straigh g t, 400 Total 11’10” 0” Stick. 1 10”” SStick i k, 72”” Bucket, 10,0,400 T hrs, Straigh g t, clean, fresh ppaint.11’ S clean, original gi l. 11’10” B Goodd U/C w/ Quick couplerr,, 66”” BBucke pads 32”” tr trackk pads. ket, New trackk groups, 36”” pads. d Komatsu dealer tested & inspected.

RENT OR

POWERTRAIN PLUS REBUILD

2007 CA ATT D8T Powertraain Plus Rebuild - $388,000 Landfill Waste Handler

RENT OR O

vissit

BUY!

2006 CA ATT 825H - $385,000

800 Hrs on CAT-dealer l r complet pl e po p wertrain rebuildi EExcellen ll t ffeet engine g , torqque, transm misison. eet. Original g paint. i Tilt blade, bl Exccellent! Rent/Lease or BBuy.

RENT OR O RENT OR

BUY! (4)2013-20166 CAT 740B’s $168,000 000 - $188,000 188,000 EA. 188

1996 CA CAT 816F - $185,,000

Low hour comppplete powertrain rebuild. All paperbl . Excellen Ex ell t chopper h l. work available ppp bars on wheels Straight blade. Rent/L /Lease or BBuyy..

RENT OR

BUY!

(4)2014-2015 015 Volvo A40G’s $$228,000 , - $248,000 $$24 , EA.

2014 CA AT 627K - $388,000

8,400 Hours, Just in from originall owner, Pushh Pull, nall pain i t, 33 33.25+29 25+29 RRubber bber, Clean l 11,500 Hours, Dealer maintained t d, Service hist h ory, Oil 5,300-7,300 hhrs, Originnall paint, EExcellen ll t radial d tirees, Erops, A/C, Original scr aper, Full history, reeady d to go. Rent/Lease or Buy. samples, Full work order done one. Good tires, Tailgates. Factory tailgates, 1 owner. Rent/Lease or Buy.

J.J. SCHECKEL REN R TS

1, 3, or 6 Month Contracts ontracts at discounted rates. Rent/Purchase ase Options.

call: 5663 63-872-4112 872 4112 | email: sales@ @jjscheckel com | www. jjsscheckel.com @jjscheckel.com scheckel com | follow us for forr daily updates:

Page 24 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Burris Equipment Co. www.burrisequipment.com 2216 N. Green Bay Rd. Waukegan, IL 60087 847/336-1205 27939 W. Concrete Dr. Ingleside, IL 60041 815/363-4100 2001 Cherry Hill Rd. Joliet, IL 60433 815/464-6650

1st Choice Equipment LLC www.1stchoiceequipment.com 1555 Atlantic Drive West Chicago, IL 60185 630/510-6050 1305 Sentry Drive Waukesha, WI 53186 262/521-5802

Lano Equipment, Inc. www.lanoequip.com Anoka, MN 888/448-5266 753/323-1720 Shakopee, MN 877/753-6100 952/445-6310 Corcoran, MN 888/479-4342 763/479-8200

ABC Equipment Rental & Sales

Southeastern Equipment Co., Inc.

www.abcequipment.com

www.southeasternequip.com

29 Pearl Rd. Brunswick, OH 44212 888/572-3888

3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260/483-8868

38525 Chester Rd. Avon, OH 44011 440/934-7368

4951 West 96th Street Indianapolis, IN 46268 317/872-4877

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 25

Mid Country Machinery

3478 5th Ave. S. • Fort Dodge, IA 50501 (515) 574-2302

4734 Sergeant Rd. • Waterloo, IA 50701 (800) 206-5936 (319) 234-8710 www.midcountrymachinery.com

2019 KOBELCO SK 140SR

2019 JOHN DEERE 317G

2018 HITACHI ZW80

2014 CAT D6N LGP

106 8th St. • Sergeant Bluff, IA 51054 (712) 943-4470 3509 Franklin St SW • Bondurant, IA 50035 (515) 410-9900

2018 CATERPILLAR 966M

2018 DEERE 700K LGP

EXCAVATORS

WHEEL LOADERS

DOZERS

2020 SANY SY500, *NEW* ..........................$CALL 2020 LBX 245X4, *NEW* ............................$CALL 2020 KOB SK350LC-10, *NEW* ....................$CALL 2020 KOB SK300LC, *NEW* ........................$CALL 2019 LBX 490X4, *NEW* ............................$CALL 2019 LBX 350X4, *NEW* ............................$CALL 2019 LBX 300X4, *NEW* ............................$CALL 2019 LBX 210X4, 5 UNITS *NEW* ..................$CALL 2019 LBX 160X4, 322 HRS ..........................$CALL 2019 LBX 145X4, 3 UNITS *NEW* ..................$CALL 2019 LBX 75X3, *NEW* ..............................$CALL 2019 KOB SK350LC-10, *NEW* ....................$CALL 2019 KOB SK270SR, *NEW* ........................$CALL 2019 KOB SK210LC, 4 UNITS *NEW* ..............$CALL 2019 KOB SK170LC-10, *NEW* ....................$CALL 2019 KOB SK85CS3-E, 3 UNIT*NEW* ..............$CALL 2019 SANY SY135, 2 UNITS *NEW* ................$CALL 2019 SANY SY95, 3 UNITS *NEW* ................$CALL 2018 KOB SK350LC-10, 2 UNITS ................$269,000 2018 KOB SK300LC-10, 898 HRS ..............$220,000 2018 KOB SK210LC-10, 2 UNITS ....................$CALL 2018 LBX 145X4DZ, 1203 HRS ......................$CALL 2017 KOB SK300LC-10, 757 HRS................$210,000 2017 SANY SY235CLR, 2457 HRS ..................$CALL 2016 LBX 350X4, 2091 HRS ....................$199,000 2016 LBX 300X4, 3342 HRS ........................$CALL 2016 LBX 210X3, 1141 HRS......................$130,000 2016 KOB SK350LC, 1700 HRS ..................$210,000 2016 KOB SK260LC, 852 HRS....................$180,000 2016 KOB SK85CS-3E, 726 HRS ..................$89,000 2016 SANY SY235CLR, 3133 HRS ..................$CALL 2015 CAT 326FL, 4280 HRS ......................$152,500 2015 KOB SK350LC, 2288 HRS ..................$190,000 2015 KOB SK210LC-9, 1092 HRS................$149,000 2014 DEERE 210GLC, 2806 HRS....................$CALL 2014 DOOSAN DX140LC, 2800 HRS ..............$68,500 2012 CAT 319DL, 3546 HRS ......................$115,000 2011 DEERE 200D, 6229 HRS........................$CALL 2009 KOB SK70SR, 5553 HRS ....................$32,500 2006 CASE CX210, 6155 HRS........................$CALL 2005 VOLVO EC460 ................................$38,500 2005 DEERE 160CLC, 5099 HRS....................$CALL 1996 HITACHI 200LC-2, 3524 HRS ..................$CALL 1996 HYUNDAI 210LC-3 ..............................$CALL

2020 HITACHI ZW80, 5 UNITS ......................$CALL 2019 DEERE 344L, 59 HRS ..........................$CALL 2018 HITACHI ZW180-6, 550 HRS ..............$165,000 2018 HITACHI ZW150-6, 287 HRS ..............$155,000 2018 CAT 966M, 1350 HRS ..........................$CALL 2018 CAT 926M, 2 UNITS ............................$CALL 2018 CAT 906M, 3 UNITS ............................$CALL 2017 CASE 521F, 235 HRS ..........................$CALL 2017 DEERE 624K, 453 HRS ........................$CALL 2015 KAWASAKI 67Z7, 988 HRS ................$120,000 2015 CAT 950M, 1146 HRS ..........................$CALL 2015 CAT 930K, 4547 HRS ..........................$CALL 2015 CAT 938M, 268 HRS ........................$182,500 2015 DEERE 544K, 2892 HRS........................$CALL 2014 CAT 938K ........................................$CALL 2014 DEERE 644K, 4470 HRS........................$CALL 2013 KAWASAKI 60ZV2, 3163 HRS ..............$62,500 2013 DEERE 524K, 5140 HRS........................$CALL 2000 DEERE 544H ....................................$CALL 1994 CAT 950F, 7527 HRS............................$CALL

2019 DEERE 700K, 234 HRS ........................$CALL 2019 DEERE 650K LGP, 243 HRS....................$CALL 2018 DEERE 700K, 641 HRS ........................$CALL 2018 CAT D6K2 LGP, 215 HRS ......................$CALL 2018 KOMATSU D51PX, 532 HRS ..................$CALL 2016 CAT D6K LGP, 5776 HRS ......................$CALL 2016 CAT D4K2 LGP, 2300 HRS ..................$95,000 2015 CAT D6K2, 2818 HRS ..........................$CALL 2014 CAT D6T XL, 2 UNITS ..........................$CALL 2014 CAT D6T LGP, 4 UNITS ........................$CALL 2014 CAT D6N LGP, 3193 HRS ......................$CALL 2013 CAT D6T XW, 3637 HRS........................$CALL 2013 CAT D6T LGP, 5030 HRS ......................$CALL 2013 DEERE 650K XLT, 2 UNITS ..................$59,000 2013 CAT D5K2 LGP, 3619 HRS ....................$CALL 2012 CAT D6T LGP, 6160 HRS ......................$CALL 2012 CAT D6T XW, 4897 HRS ....................$189,500 2012 CAT D6N XL, 3781 HRS ....................$149,000 2010 CAT D6K LGP, 3184 HRS ..................$115,000 2008 CAT D6T XW, 4732 HRS........................$CALL 2006 CAT D6R XL, 7434 HRS ....................$115,000 2001 CAT D6R XL,10544 HRS ....................$115,000

SKID LOADERS 2019 DEERE 333G, 5 UNITS..........................$CALL 2019 DEERE 331G, 150 HRS ........................$CALL 2019 DEERE 325G, 4 UNITS..........................$CALL 2019 DEERE 324G, 10 UNITS ........................$CALL 2019 DEERE 317G, 2 UNITS..........................$CALL 2018 CAT 289DXPS, 331 HRS ....................$75,000 2017 KUBOTA SLV75-2, 484 HRS ................$56,000 2016 CAT 262D, 1236 HRS ........................$39,000 2015 CAT 262D, 513 HRS ..........................$38,500 2014 CAT 287D, 1629 HRS ........................$42,500 2011 TAKEUCHI TL240, 2471 HRS ................$30,000 2011 BOBCAT S185, 3906 HRS ....................$19,000 2005 DEERE 325, 3600 HRS ......................$14,500

BACKHOES 2016 CAT 420F2, 2 UNITS ..........................$82,000 2016 DEERE 310SL, 1200 HRS ....................$93,500 2015 CAT 420F, 1941 HRS..........................$75,000 2014 DEERE 310SK, 2 UNITS ......................$58,500 2012 NH B95C, 1479 HRS ..........................$49,000 2004 DEERE 310SG, 5772 HRS....................$26,000 1980 DEERE 302A, 6781 HRS........................$CALL

MINI EXCAVATORS 2019 KOB SK55SRX-6E, 6 UNITS....................$CALL 2019 KOB SK45SRX-6E, 2 UNITS....................$CALL 2019 SANY SY60, 5 UNITS ..........................$CALL 2019 SANY SY35, 4 UNITS ..........................$CALL 2018 SANY SY50, 311 HRS ........................$47,500 2018 SANY SY35U, 115 HRS ......................$37,000 2018 LBX 75X3, 1113 HRS ........................$85,000 2018 KOB SK75SR-3E, 3 UNITS ..................$99,000 2018 KOB SK55SRX-6E, 294 HRS ................$63,500 2018 KOB SK35SR-6E, 2 UNITS ..................$45,000 2017 KOB SK55SRX ..................................$CALL 2017 KOB SK30SR, 208 HRS ......................$33,000 2017 KOB SK17SR, 408 HRS ......................$26,000 2017 SANY SY35U, 90 HRS ........................$39,000 2016 CASE 55CXB, 882 HRS ........................$CALL 2015 KOB SK35SR, 119 HRS ......................$41,000 2014 KOB SK17SR, 555 HRS ......................$24,000

Page 26 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Toys For Boys (and also men) Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Vogele Super 1900-3 Tracked Paver, Caterpillar D7E Track-type Tractor w/ 1:50 scale - $125 Pipe line configuration, 1:50 scale - $115

Caterpillar AP-1050 Asphalt Paver, 1:50 scale - $100

Terex 33-07 Quarry Truck, 1:40 scale - $125

Caterpillar 14M Motor Grader, 1:50 scale - $100

Case 850 Dozer, 1:35 scale - $50

Caterpillar 245 Excavator, 1:50 scale - $100

Bucyrus Erie 22B Dragline, 1:50 scale - $285

Allis Chalmers Forty-Five Grader, 1:50 scale - $75

Caterpillar 963K Track Loader w/Ripper, 1:50 scale - $85

John Deere 400D Articulated Dump Truck, 1:50 scale - $40

Caterpillar 323F Excavator w/thumb, 1:50 scale - $80

JCB TLT25D Teletruck High Lift, 1:35 scale - $40

JCB 467 WLS Articulated Wheel Loader, 1:50 scale - $75

Volvo L60H Wheel Loader, 1:50 scale - $75

Liebherr L522 Wheel Loader, 1:50 scale - $45

Shipping and Handling Included

WE PURCHASE COLLECTIONS!!!

Bmckeon Collectibles

Contact – Barry McKeon

470 Maryland Drive Fort Washington, PA 19034

610-506-5961 Email – bmckeon9@gmail.com

Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 27

2018 Case 580SN, 995 HRS, EQ0009659, Garden City, KS ....................................................$82,500

2019 Case TR270, 23.7 HRS, EQ0009453, Kansas City, MO ....................................................$48,900

2014 Case SR210, Mechanical H Pattern, 1,000 HRS, EQ0003198, Garden City, KS ..........$31,850

2014 Case 621F, Zbar, 1995 HRS, EQ0003141, Garden City, KS........................................$125,000

2006 Case 580M II Loader/Extendahoe, EQ0010281 in Garden City, KS. ................$29,500

2012 Case SV250, 2,189 HRS, EQ0008990, Kansas City, MO ........................................$19,500

2015 Case 580SN WT, Pilot Controls, 1180 HRS, EQ0004234, Kansas City, MO ..................$79,000

2014 Case CX300C, 2010 HRS, EQ0003165, Kansas City, MO ..................................................$174,900

Pages 28-40

Crushing, Screening & Recycling Section For more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

Sennebogen 718 ‘Force Multiplier’ Crushes Workload Jason R. Porter has been attacking his work days lately by getting away from the desk and linking back up with his crews in the field conducting tree removal operations. Treeworks Inc. a TCIA accredited company based in west Michigan, took delivery of a new Sennebogen 718 in October of 2019. Like many tree care company owners, brothers Jason, Zach and Luke Porter started young, working with their father in the late 80’s and continue to work together until this day. “Dad trained us with sweat equity and will power. We worked brutally hard. And to this day, hardly a moment goes by on the work site that I don’t appreciate all the new types of equipment we have, and that have been introduced to our industry,” Jason said. For Jason, the last several years has taken him out of the field from the craft he enjoys and more into an administrative role, managing the company of 14 precise hydraulic system gives him staff. It is a familiar the “feel” and control to operate with path in the industry. surgical precision. “I desperately “You have to be a tree guy,” he wanted to get back cautions. “Aerial experience [buckinto the woods with et truck and climbing], combined the crews and parwith equipment operator experiticipate in producence are invaluable when you are tive tree work, and The Sennebogen 718 contin- working with a Sennebogen 718. If not just be the old ues to crush the workload you have these two skillsets in your tree guy in every- at Treeworks in Michigan. holster, you can knock it out of the one’s way. The park with this machine.” Sennebogen 718 is absolutely a massive force multiplier when I am on a project with Good Fit for it. I really enjoy working with it. After so Right of Way Clearing many years of doing tree work the hard way, Treeworks Inc. is a full-service tree comthis machine feels like vacation.” pany with a focus on commercial contracts for municipalities, county road commis“You Have to Be a Tree Guy” sions, DOT work and utility companies. With the Sennebogen 718, Porter disman“We run four crews, and the Sennebogen tles trees, stacks the wood, and feeds the is a crew unto itself,” said Porter. “A large chipper from the comfort of an air-cushion percentage of our workload is an ideal fit for seat in a climate-controlled cab. this machine. The Sennebogen is not for In his hands are the controls of a hydraulic every tree; you have to know where to grapple saw fitted to the end of 43 ft. (13 m) deploy it. That said, when it is employed telescoping boom. He can elevate the cab for where it is supposed to be, there’s just notha better view of the cutting zone and swing ing else that compares to it.” the boom through 360 degrees to place and Porter first discovered Sennebogen in the stack the removed limbs. A powerful and summer of 2018 after speaking to Ken

A giant silver maple with a crown that arched over the road was dismantled in 50 minutes.

Palmer, a champion tree climber and safety instructor. Palmer invited Porter to a demo day at Sennebogen's head office in Stanley, N.C., where he’d seen the machine going through the paces with operator Rob Frost. “Rob is a tree guy. We have very similar work history. We speak the same language. I knew Rob was presenting the 718 capabilities based on a wealth of actual experience. A spec sheet or salesman can’t do that,” Porter said. “Absolutely Worth It” At the demo, the features to really get Porter’s attention was the maneuverability of the saw head, combined with the telescoping reach and amazing lift capacity. “I immediately saw the value of the machine and began to lament to myself about all the jobs we had suffered through that the Sennebogen 718 could have solved. I knew immediately the machine was a fit for our business going forward.” And now with over 500 hours of operating time in the 718, Porter likes the economics as well. “I can say confidently that the Sennebogen production on our jobs has consistently been equal to two bucket truck crews. For us, that

would be equivalent to two bucket trucks, two track loaders, and four guys. Add up the operating costs of those four pieces of equipment and crew members, it’s a ton. The Sennebogen 718 is absolutely worth it. “It is just stunning how much material you can efficiently move onsite. And it is often less impact to the site and less stress on other machines like track loaders. Many trees barely touch the ground, but go directly into the whole tree chipper. And if you are stockpiling trees and it comes time to chip, you elevate the cab and look down on the pile and into the chipper instead of directly into a big stack of brush. It is a great additional feature that I have grown to appreciate”. Ease, Comfort Porter returns to the ease and capability the 718 brings to his trade. “Think of poor weather conditions, working along a road, in waterfilled ditches full of cattails, mud, and slopes. We used to do that type of work by hand cutting, driving loaders in those areas, over stumps, and pulling material out with a tagline or whatever we could think of just to complete the task. Some of the work can be pretty rough. The Sennebogen takes a task that can be awful and turn it into an enjoyable, successful project. “In March we completed 2 miles of road clearing that would have taken twice the time, and twice the manpower with our old methods. With the 718 we had it done in record time, and nobody broke a sweat,” Porter said. “On another municipal job removing 50 dangerous trees along city streets, the Sennebogen was able to complete 48 of them. And one of the trees was a massive 60+ inch, multi-stem Silver Maple. The crown of this tree arched over the road, utilities and a house. It was late in the day and I closed the street and sent most everyone home so I could focus on just this one technical tree removal. This tree would typically be most of the day for 3 guys and a bucket truck. I had it safely and neatly staged on the ground in about 50 minutes.” “And the thing is, it was fun.” For more information, visit www.sennebogen-na.com. 

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 27, 2020 • Page 29

93 8455&'1* 1&3) (1*&7.3, (43 879(8.43 *69.52*38

5 58 8 8 8

3*; 43.( 8*(-3414,=

5IVJSVQERGI .QTVSZIQIRX

'1 1 * *< < : :8 ' * < : 8

8( 1

JEIYWE GSQ JE

REMU CR 1100 Crushing Bucket Crushes Demolition Waste The operational principles of the CR 1100 are based on high torque and a slow rotating crushing drum that is powered by two direct drive motors that produce a maximum cutting force of 172kN (38500 ft lbf).

All around the world the use of secondary materials is increasing, supporting the circular economy and the efficiency of material usage. REMU’s new crushing bucket, the CR 1100, is designed to decrease the volume of most common materials from demolition sites including tiles, concrete, drywall and asphalt, according to the manufacturer. The operational principles of the CR 1100 are based on high torque and a slow rotating crushing drum that is powered by two direct drive motors that produce a maximum cutting force of 172kN (38500 ft lbf). When material hardness is less than 25 Mpa, the performance of the crushing bucket with a rotating drum is higher than those with the technology of a jaw crusher, according to the manufacturer. The CR 1100 crusher can be operated with a 25 to 40 ton excavator and will process one bucket load (1.1 cu. yd. [1 cu m]) of volume in approximately 1.5 minutes. This means the total processing capacity is 52 cu. yds. (40 cu m) per hour. “According to our tests the bucket performs well with mixed demolition waste including regular concrete, steel, wood, plastic, etc. Highstrength concrete and hard stones like granite are still out of our range,” Jussi Saari, leading engineer of REMU, said. For more information, visit www.remu.fi. 

Page 30 • June 27, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

MB Crusher Helps Cozy, But Cramped Croatian Town Lay New Water Pipes Brodarica in Croatia is a small and peaceful holiday village by the sea. Its catchword is relax. This small cozy area offers amenities where tourists and local families can have a pleasant time. All easily achieved, until recently, when the water mains change became imperative. The quiet in this coastal village could be jeopardized by the major work that needed to be done in the city roads as the road surface needed to be removed in depth to lay the new water pipes. To complicate the matter in this area, the villas and the private houses are separated by paths 6.5 ft. wide; there is barely room to move. So the machines to use needed to be compact and precise. A daunting task for the contractor, they needed to identify the way to go along the roads, dig 7.2 ft. deep and lay the new water pipes without inconveniencing the residents. To do a major work in a residential area is a complex operation. Worsened, in this case, by the lack of space. Not to mention the need to operate in respect of the residents’ security. Tapping the road surface with a hammer proved to be unfeasible because of the vibrations that it caused due to the presence of other pipes and the excessive time frame. To save the day and overcome this challenge an MB Crusher drum cutter MB-R500 attachment was called in. Control, low vibration and compact size are just a few of the advantages this unit has, according to the manufacturer. Mounted on a Takeuchi TB-290-2, the drum cutter managed with ease to grind through the hard limestone typical of the Dalmatian region. How They Did It A compact excavator that can move through the small pathways between houses and private gardens, the MB Crusher drum cutter MB-R500 can grind the limestone with precision and speed, despite the presence of existing pipes. The preparation phase for replacing the underground water mains in this town is undergoing, residents continue to live in the building during the pipeline renovation and the job is keeping the time scheduled. It is always matter of choosing the right equipment for the job, to get the job done right. The MB Crusher cutterhead MB-R500 is the smallest of the line, it weighs only 661 lbs. and its powerful grinder has a diameter of 19.6 in., plus it has several accessories that can be chosen based on the task ahead. If working in enclosed spaces, or on busy roads this rotary

Mounted on a Takeuchi TB-290-2, the drum cutter managed with ease to grind through the hard limestone typical of the Dalmatian region.

LARGE EQUIPMENT DEALERS (The Beast, Whole Tree Chippers, Sawmill / Chipmill Chippers, Track Carriers)

Ashland, KY 606-327-1709 Cowen, WV 304-226-3299 Beaver, WV 304-255-1525 Cross Lanes, WV 304-204-1818 Pleasant Valley (Fairmont), WV 304-534-5454 Norton, WV 304-636-6421 Pikeville, KY 606-432-0321 Marietta, OH 740-373-5255 www.lec1.com

Valley Park, MO 63088 636-225-2900 O’Fallon, MO 636-240-9020 Columbia, MO 573-886-9435 Champaign, IL 217-607-1454 Fairview Heights, IL 618-397-1847 Marion, IL 618-985-8920 Springfield, IL 217-525-0349 Evansville, IN* 812-422-8200 Bowling Green, KY* 270-842-4253 www.bobcatofstl.com *Also, Small Equipment Dealer

The villas and the private houses are separated by paths 6.5-ft. wide; there is barely room to move. So the machines to use needed to be compact and precise.

cutter can be equipped with a drum cover kit to reduce dust emission and stones jolting away. When milling is required to a specific depth, the cutting depth adjustment kit is the right accessory to use. For more information, visit www.mbcrusher.com. 

6750 Millbrook Rd. • Remus, MI 49340 9340 • 1-800-952-0178 FIND US ONLINE WWW W.BANDITCHIPPERS.COM W.BANDITCHIPPERS.COM

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 27, 2020 • Page 31

Bandit Buuilds More Thaan Machines.... Bandit Industries has bbased its reputation on a simple truth – build them strong and stand tand behind our customers. And that’s what we’ve done eveery stepp of the wayy. Every Banditt® machine uses the highhest quality steel and is constructed cted by specialized teams to stand nd up to the toughest jobs. Thhat’s why more professionals truust a Bandit for their toughest jobs. And every machine is backked by unbeatable factory support and an extensive dealer network. ork. 6750 Millbrook Rd. • Remus, MI 49340 9340 • 1-800-952-0178 FIND US ONLINE WWW W.BANDITCHIPPERS.COM .

When it comes to yourr business, Bandit Industries doeesn’t just build machines. See hoow Bandit can build your bbottom line. Contact your local authorized a Bandit dealer today orr visit www.banditchippers.com to learn more!

SMALL EQUIPMENT DEALERS (Brush Chippers, Stump Grinders, Skid Steer Attachments)

Bobcat of Indy 1160 McCabe Ave. Elk Grove Village, IL 60007 847-678-3640

West Chicago, IL 630-293-0606 Yorkville, IL 630-553-0150

Mokena, IL 708-596-8050

Merrillville, IN 219-381-3006

Wauconda, IL 847-526-4255

www.atlasbobcat.com

1200 East Highway 13 Burnsville, MN 55337 952-894-0894

588 Outpost Circle Hudson, WI 54016 715-531-0801

71 Minnesota Avenue Little Canada, MN 55117 651-407-3727

www.tristatebobcat.com

Cincinnati, OH 513-874-8945

Reynoldsburg, OH 614-863-1300

Mt. Orab, OH 937-444-3865

Lexington, KY 859-254-3936

Hillard, OH 614-876-1116

www.bobcat-ent.com

2935 Bluff Road Indianapolis, IN 46225 866-442-3052

4489 S Indianapolis, Road Whitestown, IN 317-769-4946

2075 E CR 67 Anderson, IN 765-643-4222

2002 West 3rd Street Bloomington, IN 812-287-8042

www.bobcatofindy.com

Page 32 • June 27, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

PRO OVEN UPTIME WITH UPTIME KIT KITS SENNEBOGEN, in keeping with their philosophy to maaximize uptime, uptime has created UPTIME Kits. W Whether you are a service technician in-house or on the road, these kits have everything you y need for every service, maintenance and PM task in one place. They were created to save you time and money. Managing hundreeds of related service parts, from belts and nuts to O-Rings and special tools becomes eassy with a single part number to order and stockk.

PURP POSE-BUIILT

FROM THE T GROUND D UP

They are: • Easy to order an nd easy to stock Ţ 1BDLFE XJUI KPC C TQFDJŻD components an nd tools • Ideal for stockin ng service shops and trucks Choose from the following f kits: • Central lubricattion system kits • Preventive main ntenance service kits • O-Ring kits • Electrical servicce kits • Hydraulic servicce kits And the best thing is that these kits, in stock and ready to go, are custom-built to match your machine mo odel and series. Count on 4&//&#0(&/ UP NFFU ZPVS OFFET JO UIF ŻFME or in-house. For m more information on UPTIME Kits scan the QR code. Kits, code

BRANDEIS MACHINERY & SUPPLY COMPANY www.brandeismachinery.com Louisville, KY 502-491-4000 Evansville, IN 812-425-4491

Stanville, KY 606-478-9201 Paducah, KY 270-444-8390

Corbin, KY 606-528-3700

Indianapolis, IN 317-872-8410

Lexington, KY 859-259-3456

Ft.Wayne, IN 260-489-4551

HOWELL TRACTOR & EQUIPMENT LLC www.howell tractor.com Gary, IN 219-810-6327 Peru, IL 800-342-6072

See how SE ENNEBOGEN can purpose-build the right maachine for you

www.seennebogen-na.com | +1-704--347-4910 GIBSON MACHINERY LLC www.gibson machinery.com Cleveland, OH 440-439-4000

ROLAND MACHINERY CO. www.rolandmachinery.com Carterville, IL 618-985-3399 East Peoria, IL 309-694-3764 Bridgeton, MO 314-291-1330 Columbia, MO 573-814-0083 Cape Girardeau, MO 573-334-5252 Palmyra, MO 573-769-2056

Franksville, WI 262-835-2710 DePere, WI 920-532-0165 DeForest, WI 608-842-4151 Eau Claire, WI 715-874-5400 Schofield, WI 715-355-9898 Slinger, WI 262-644-7500 Escanaba, MI 906-786-6920

THE VICTOR L. PHILLIPS CO.

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com

www.vlpco.com Kansas City, MO 800-878-9290

Savage, MN 800-888-9515

East Moline, IL 800-633-9114

Joplin, MO 800-878-8223

Des Moines, IA 800-555-1445

Duluth, MN 800-888-9535

Brookline Station, MO 800-955-2729

Cedar Rapids, IA 800-616-6615

Virginia, MN 800-752-4304

Wichita, KS 800-878-3346

Sioux City, IA 800-633-9104

Topeka, KS 800-878-4345 Garden City, KS 800-511-1435

ASCENDUM MACHINERY www.Ascendum Machinery.com Bismarck, ND 701-250-4882 Fargo, ND 701-271-2369 Williston, ND 701-577-1249

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 27, 2020 • Page 33

AIS CONSTRUCTION EQUIPM MENT CORP P.. www.aisequip.com m 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502

S Saginaw 46000 AIS Drive Bridgep port, MI 48722 989-777-0090 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

BUTLER MACHINERY CO. CO www.butlermachinery.com y 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. S 46th St. St Grand Forks, ND 58201 701-775-4238

1505 Hwy 2, Bypass E Minot, ND 58701 701-852-3508 4950 E Highway 12 Aberdeen, SD 57401 605-225-6240 3601 Deadwood Ave. N Rapid City, SD 57702 605-342-4850 20571 Truck Stop Ave. Pierre, SD 57501 605-224-5400 3201 N. N Louise Ave. Ave Sioux Falls, SD 57107 605-336-3010

CENTRAL SERVICE & SUPP PL LY Y, INC. www.centralsands.co om 4219 E. 50th St. • Des Moines, IA 50317 800-247-2400 • 515-964-8 8600

RB SCOTT COMP PAN ANY IINC. www.rbscott.com 1011 Short St. Eau Claire, WI 54701 715-832-9792

ROAD BUILDERS MACHIINERY & SUPPL LY YC CO., INC.. www.roadbuildersmachine ery.com y 1001 S. 7th St. 5601 Fleetcher Ave. Kansas City, KS 66105 Linccoln, NE 913-371-3822 402-3 325-0447 4115 S. 90th St. 4949 Ju uergen Rd. Omaha, NE Grand Island, NE 402-331-9200 308-3 384-2620 1303 S. Chestnut St. Norfolk, NE 402-316-4640

™

Page 34 • June 27, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

A WIRTGEN GROUP COMPANY A

THE EVOLUTION OF INNOVA VATION. T THE EVO-LINE FROM KLE EEMANN

EVO IT’S ALL ABOUT EVOLUTION. The demands placed on plant s in the contrac ting sec tor are high: maximum output matched with cos tef fec tive operation – and all for the mos t diverse applications. This is exac tly what dis tinguishes KLEEMANN E VO -Line plant s. Thanks to highly innovative solutions, such as an advanced material flow concept, continuous feed sys tem, out s tanding safet y concept s and many more, KLEEMANN’sE VO -Line mobile jaw crushers, impac t crushers and cone crushers deliver a solid plus in per formance, ef ficienc y and versatilit y. Progress calls for real innovation – the KLEEMANN E VO -Line. w w w.wir tgen- group.com//a america

WIR RT TGEN AMERICA, INC. · 6030 Dana Way · Antioch, TN 37013 · T Telephone: elephone: 615-501-0600

www.bramcomps.com Louisville, Kentucky 1801 Watterson Trail Louisville, KY 40299 Toll Free: 877-538-3221 Phone: 502-543-3746 Fax: 502-543-3716

Evansville, Indiana Fort Wayne, Indiana Indianapolis, Indiana Corbin, Kentucky Lexington, Kentucky Louisville, Kentucky Paducah, Kentucky Stanville, Kentucky

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952-884-2301 800-352-2757

Columbia, Missouri 4110 I-70 Drive SE Columbia, MO 65201 Phone: 573-814-0083

www.rolandmachinery.com

Carterville, Illinois 1505 Donna Drive Carterville, IL 62918 Phone: 618-985-3399

Portage, Indiana 6450 Melton Road Portage, IN 46368 Phone: 219-764-8080

DePere, Wisconsin 3275 French Road DePere, WI 55115 Phone: 920-532-0165

Schofield, Wisconsin 9808 Weston Avenue Schofield, WI 54476 Phone: 715-355-9898

Springfield, Illinois 816 N Dirksen Parkway Springfield, IL 62702 Phone: 217-789-7711

East Peoria, Illinois 4299 N. Main St. East Peoria, IL 61611 Phone: 309-694-3764

Escanaba, Michigan 2600 S Lincoln Road Escanaba, MI 49829 Phone: 906-786-6920

Eau Claire, Wisconsin 7417 Margaret Lane Eau Claire, WI 54703 Phone: 715-874-5400

Slinger, Wisconsin 881 East Commerce Blvd Slinger, WI 53086 Phone: 262-644-7500

Bridgeton, Missouri 4670 Crossroads Industrial Dr. Bridgeton, MO 63044 Phone: 314-291-1330

Bolingbrook, Illinois 220 East Frontage Road Bolingbrook, IL 60440 Phone: 630-739-7474

Marengo, Illinois 18210 Beck Road Marengo, IL 60152 Phone: 815-923-4966

DeForest, Wisconsin 604 Stokely Road DeForest, WI 53532 Phone: 608-842-4151

Franksville, Wisconsin 2916 N Sylvania Ave Franksville, WI 53126 Phone: 262-835-2710

Cape Girardeau, Missouri 3364 Percy Drive Cape Girardeau, MO 63702 Phone: 573-334-5252

Palmyra, Missouri 701 Industrial Drive Palmyra, MO 63461 Phone: 573-769-2056

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 27, 2020 • Page 35

573-635-8700 • 888-972-2537 • www.rackersequipment.com

#141147-"NEW" RDO 5x12 2-deck screener with CAT C-4 water cooled engine. Remote #152028-(NEW) Aggretek 36 X 25 Single control for feeder. Ball deck and grizzly hopper Fine Material Washer. with 15hp electric (no grizzly). 2-30" side discharge conveyors. motor and includes Nihard shoes, adjustable Mounted on tandem axel 5th wheel chassis. legs, catwallks, stairs, guards, and operator platform. In-stock and ready for shipment.

#510113 (2007) Furukawa 900-ES SelfContained Hydraulic Rock Drill with Cat 3126 engine (4892 hours) & HD-709 drifter (2203 hours). Set up for T-45 Steel (14′ starter & 12′ changes). Has anti-jam circuit and dust collector. One-owner machine and all service records available. Well maintained and in very good condition.

#111070 Pioneer 2854 jaw crusher with 50x18’ VGF and electric motor all on a 3-axle chassis. Good condtion.

DRILLS & COMPRESSORS #530022-Joy RAM EXT air track drill with VCR 360 hammer. Hoses appear to be in working condition. U.C. approx 70%- overall good condition. #510112-(2007) Furukawa 900-ES SelfContained Hydraulic Rock Drill with Cat 3126 engine (4840 hours) & HD709 Drifter (2261 hours). Set up for T-45 steel (14′ starter and 12′ changes). Has anti-jam circuit and dust collector. One owner machine & overall, very good condition #510087-Furukawa 9E hydraulic drill with Isuzu diesel engine. 10764 engine hrs, 4619 impact hrs. Anti-jam circuit, dust collector, uses T-45 steel, 14 ft starter with 12 ft changes. Good condition. #580000-Furukawa HD712 drifter with approximately 4786 total impact hours and zero hours on complete reseal. Was used on 1200EDII. Ready to be installed for operation. #520032-Ingersoll Rand 750CFM/300PSI high pressure compressor with Cat 3406 engine. Runs and operates good.

#410071 Komatsu D65PX-17 dozer with 4380 hours on 205hp engine. Auto transmission, undercarriage approx 80%. Enclosed cab (very clean). 6-way angle blade with angle and tilt. Machine ready for work.

#161003 (New) Willis 36”x75’ Radial Stacker with folding head/tail sections, pintle hitch, 20hp electric motor, #6 gearbox, 3-ply belt, 35 degree idlers, and 5” Cema C idlers.

EARTHMOVING #810034-Euclid R-35 truck has an engine that is a Detroit diesel V12 with an Allison 6-speed automatic transmission. The tires are 1800x33 all in good condition about 50%. Bed liner looks good as does the remainder of the truck. No leaks. Runs good. #810035-Euclid R-35 Haul Truck with Cummins KT1150 engine, Allison auto-transmission (weak reverse), and Phillipe Hagenbush tailgate. 1800:33.5 tires approx. 40-80% and good bed. #410063-CAT D9H w/ EROPS cab w/ A/C, straight blade w/tilt. Single shank, 4-barrel ripper. 24" pads. U/C (overall approx 70%). Rebuilt engine, trans, and finals (HMR 2994) Left Trunnion is available but needs to be installed. Overall good condition. #410070-CAT D6R dozer with 10' straight blade with good cutting edge. Has EROPS cab with air. Glass all good. 22" single grouser pads, overall condition of undercarriage is 60%. Pins have tit on drive side. Has 4600 hrs.

#830001-Mack GU 713 dump truck with 395 HP engine (492,000 miles) and 10-speed transmission. GVW 54,000lbs. 15′ bed with electronic bed cover. Good tires all around. Overall, good solid looking truck.

#154004-Telsmith vibrating 5×16 2-Deck Wet Screen with stand, pre-wash box, and some new AR liners. Has water manifold with water on both decks. No switch gear. Several pieces of screen cloth. Very good condition.

#510115 Furukawa 1200ED hydraulic rock drill with 12,206 overall hrs & 3154 hours on Cummins 6.7 remanufactured engine. 5776 impact hrs but only 39 hours on drifter reseal. Includes cab with a/c & heat, dust collector and an anti-jam circuit. Good condition.

PER ERFORMA O ANC OR CE UND DER R PRE ESS SSURE E Since 1942, Allied® hydraulic attachments ha ave consistently stepped up to meet challenges from contractor t s and municipalities who need eed to rent stro onger equipmen uipment with more e reliabili e ty and operating efficiency. Our Rammer® and Allied hydraulic hammer mers, as we ell as our Ho-P Pac® and Skid-Pac® compactors s, are designed to actua ally verify e and improve your carrier rrier ROI decisions decisions. Proving v again and again that nobody dy kno knows how to o deliver e hydr d aulic produc o tivity under prressure like Allied. Fo or de etails, visit an Allied distribut utor or call 800-321-1046 46.

TH HERE’’S S NO SUBS STITUTE FOR E EXP PERIENCE ER RIENCE

ALLIEDCP.com c | 800.3211.1046

SCREENS #141120-Nordberg 6x20 3-deck incline screen with ball tray on bottom deck. No motor, but was a running take out. Good condition.

SECONDARY CRUSHERS #121033-Universal 150/230 impactor with completely rebuilt rotor, new shoes, new hammers, and some new liners (inside looks very good). (2) new 350hp electric motors and new drive sheave. Crusher and motor only, no stand. #121029-Humbolt Wedag secondary impact (42" wide/14" max feed) with new set of hammers and some new liners (not installed). 4 bar rotor. No power. Crusher is in good condition. #121053-Cedarapids 5040 Hammermill secondary crusher with 5x16 3-deck screen. Has rotovator, 36" return and 36" front discharge conveyors. All mounted on tandem axle chassis. Plant is all electric except the hammermill is diesel jack shaft driven. No JAWS & IMPACTS power on mill. Power unit and control panel #111063-Terex Pegson 1180PT 32"x44" are available separately for $12,000. Engine FEEDERS self-contained jaw plant w/ operator-conruns, but needs to be rebuilt. 134001-Peerless 12 cubic yard hopper trolled track maneuvering. Large feeder w/ #121052-Svedala B9100 Portable VSI. with step grizzly section, grizzly pass-by chute, & with 42 belt feeder (2015), 5hp electric motor 36”x40 under conveyor, twin 300hp electric discharge conveyor. Plant is currently in use with electric panel in very good to excellent motors, switchgear, and 25hp motor for con& has approx 5082 (04/21/17)hrs. Very good condition. veyor, only 900 hrs and set w/rock shelf, good condition. #132015-Continental Gin 48"x25.5' apron condition. #112007-Kennedy Van Saun 3648 single feeder. Large feed box. Flights are approx #121055-New CEC 102×152 (approx. 42.5” x rotor impact with electric motor & Deister 80+%, good sprocket, & jackshaft drive gears. 61”) secondary impact crusher with 3-bar 50”x18’ VGF on 3-axle chassis. 60hp motor and gear box, but has removable rotor and hydraulic clearing. No motor, no #112044-Nordberg LT-1213 Track Mounted Impact. with 42”x12’ VGF, 36” cross belt mag- mount (for transport). Heavy duty apron feed- stand, but does have crusher shive. Excellent net, and 46” underconveyor, good condition. condition, never used. er. Shipping dims: 8' 7" tall & 30' long.

Jefferson City, MO 65110

HIGHWAY EQUIPMENT COMPANY

HOWELL TRACTOR AND EQUIPMENT www.howelltractor.com

www.highway-equipment.com 1405 Timken Place SW Canton, OH 44706 330-915-8391

480 Blaine St. Gary, IN 46406 219-810-6327 2770 May Rd. Peru, IL 61354 815-224-3003

Page 36 • June 27, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

Setting The Standard In Static Screening Since 1998 With the largest selection of adjustable bar grizzlys available anywhere

YOU DON’T HAVE TO COMPROMISE Produce Many Products With A Single Grizzly Set the deck bar opening you need and produce the exact material required You don’t have to settle for reducer grates that only allow two sizes, usually too large or too small

• Deck Bar Adjustments In 1” Increments • Safe / Self Cleaning ROCK RELEASE

• New Deck Bar Attachment System • Easy Deck Bar Replacement

Lorem ipsum Lorem ipsum

5064 FE ATURES )HDWXUHV DQ HQFORVHG HQJLQH FRPSDU WPHQW /DUJH IHHG RSHQLQJ DQG LQFK KDPPHUPLOO ZLWK D VHOI FOHDQLQJ DLU LQWDNH V\VWHP 2VFLOODWLQJ VWDFNLQJ FRQYH\RU $YDLODEOH RQ &$7 7UDFN 6\VWHP RU DV D $OVR PDQXIDFWXUHV D ZLGH YDULHW \ RI TXDOLW \ ¿I WK ZKHHO WUDLOHU W X E J U L Q G H U V 7KUHH GLI IHUHQW OHYHO RSWLRQV RI &$7 7LHU ,,, KRUVHSRZHU UDQJLQJ IURP KS N Z WR KS N Z

action

cts in View produ Tech D e on th ura l! channe

Rock Grizzlys is all we do, contact us anytime to discuss your rock screening needs.

541-383-3700

rocktough.com

800-496-3431

SAMS & DUNNS Listed

Komatsu Showcases ZT44 Track Drill for Quarry Operations TC-12 FE ATURES 7KLV SRZHU IXO FKLSSHU FDQ JULQG ORJV XS WR LQFKHV LQ GLDPHWHU DQG LV FRPSDFW VR LW FDQ EH HDVLO\ WRZHG WR D MRE VLWH KS N Z &$7 & GLHVHO HQJLQH 37 7HFK FOXWFK )HDWXUHV D VSULQJ ORDGHG IHHG ZKHHO ZLWK DGMXVWDEOH GRZQ SUHVVXUH

2SWLRQDO KHLJKW VHQVRU WKDW DXWRPDWLFDOO\ DGMXVWV WKH IHHG UROOHU WR PDWHULDO VL]H 2SWLRQDO K\GUDXOLF JDWKHULQJ ZLQFK ,QQRYDWLYH KRSSHU VDIHW \ OLJKW EDUV ZLWK HDV\ DQG LQVWDQW VKXW GRZQ $YDLODEOH ZLWK SLQWOH RU EDOO KLWFK

Chadwick-BaRoss Inc. 160 Warren Ave Westbrook, ME 04092 800-262-5714 • 207-854-8411 Fax: 207-856-2995 www.chadwick-baross.com 15 Katrina Rd. Chelmsford, MA 800-804-0775 • 978-256-9571 Fax: 978-256-8802 314 Main St. Caribou, ME 04736 800-270-2547 • 207-498-2547 Fax: 207-498-6596

Wm. Biers, Inc.

188 Perry Rd. Bangor, ME 04401 800-698-4838 • 207-942-4838 Fax: 207-941-0856

100 Port St. Port of Albany, NY 12202 518-434-2747 Fax: 518-434-2754 www.wmbiers.com

237 Sheep Davis Rd. Concord, NH 03301 800-477-4063 • 603-224-4063 Fax: 603-224-3001

w w w.duratechindustries.net

The Komatsu ZT44 track drill enhances productivity in challenging geology and has the flexibility needed to drill in a variety of settings, from small patterns and uneven ground conditions, as well as multiple angles and even de-watering, if required.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 27, 2020 • Page 37

Illinois

Indiana

Kentucky

Minnesota

Midwest Crushing & Screening

Powerscreen Indiana, Inc.

Powerscreen Crushing & Screening

Theco, Inc.

7144 N. Harlem Ave. Chicago, IL 60631 www.midwestcrushandscreen.com

847.271.5027

255 N. Hetzler Court Angola, IN 46703 www.powerscreenindiana.com

260.665.5816 • 800.843.4277

11901 Westport Road Louisville, KY 40245 www.powerscreensales.com

800.227.0534

14833 164th Ave. S.E, Big Lake, MN 55309 www.thecoinc.com

763.263.0505

Michigan & Ohio

Missouri & Kansas

AGGCORP

Powerscreen Central

22800 Lakeland Blvd. Cleveland, OH 44132 www.aggcorp.net

9001 Hickman Mills Drive Kansas City, MO 64132 www.powerscreensales.com

614.309.6854

502.326.9300

Page 38 â€¢ June 27, 2020 â€¢ www.constructionequipmentguide.com â€¢ Recycling Section â€¢ Construction Equipment Guide

CRUSHING

MA ATERIAL TERIAL HANDLING HANDLING

SCREENING

TRACKS

WASHING W ASHING & CLASSIFYING

6WHSNH &W Traverse, MI 49 685 231- 943 - 3700 )D[

3RQWLDF 7UDLO 1HZ +XGVRQ 0, 48165 248 - 356 - 5200 )D[

2OG 6 *D\ORUG 0, 989 -731- 9988

( 0LOH 5RDG 6WHUOLQJ +HLJKWV 0, 0, 48312 586 - 474 - 5063

The complete sour s ce for equipment in the aggregate, construction ction and recycling indu ustries. Offering industry--leading brands such as the Pioneer Jaw Crusher, Kodia akÂ® Plus Cone Crusher, Supe erStackerÂ® Â® Â® Â® Extendable Stack ker, ProSizer Mobile Screening Plant, Combo Screen, Vari-Vibe a High-Frequency Scr S een, Duo-VibeÂ® High-F Frequency Screen, Series 90 000 equipment, Fast Trrax, Gllobal Trrack and FastPack.

www.kpijci.com

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • June 27, 2020 • Page 39

Lokotrack® ST4.10™ mo obile screen AIS CONSTRUCTION EQUIPM MENT CORP P.. www aisequip com www.aisequip.com m 3600 N. Grand River Ave. Lansing, MI 48906 517-321-8000 Grand Rapids 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 Northeast Detroit 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502

Saginaw 4600 AIS Drive Bridgeport, MI 48722 989-777-0090 Traverse City 8300 M-72 East Williamsburg, MI 49690 231-267-5060 West Detroit 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121 800-457-8121

High productio on needs heavy-duty screening Lokotrack a ST4.10 5' x 20' mobile scre een is ideal fo or large-scale aggreg gates production. Its triple deck ck screen produces fo our end produccts.

High capacit y screening Large scale 5' x 20' triple deck screen

The adjustable discharge height on 33' side conveyors makes it a powerful f screen in closed circuit crushing ushing processes together with other th Lokotrack units, and the wide ffeed e d hopper is ideal fo or whee h ell loader fe eeding in sand and gravel screening. Contacct your distributor or visit www.metso.com for more.

BUTLER MACHINERY CO. www.butlermachinery.com y 3402 36th St. SW Fargo, ND 58014 701-280-3100 800-726-7475 3630 Miriam Ave. Bismarck, ND 58501 Bismarck 701-223-0890 2803 I-94 Business Loop E Dickinson, ND 58601 701-456-1400 1201 S. 46th St. Grand Forks, ND 58201 701-775-4238

Closed circuitt Ideal for closed circuit processes

Hybrid power Bi Power for elec tric op perations

CENTRAL SERVICE & SUPP PL LY Y, INC. www.centralsands.co om 4219 E. 50th St. • Des Moines, IA A 50317 800-247-2400 • 515-964-8 8600

RB SCOTT COMPANY INC. www.rbscott.com 1011 Short St. Eau Claire, WI 54701 715-832-9792

Track-mounted unit On-site mobilit y and easy to transpor t bet ween sites as a single unit

Page 40 • June 27, 2020 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

GET A HAND DLE ON OPERAT ATING COSTS Penn Jersey Machinery

Terex® Fuchs Material Handlers

Purpose-built for your scrap yard, transfer station or mill yard, Terex® ere Fuchs material handlers help you get a handle on your business with: An average 11% reduced fuel consumption versus competitive material handlers An average 45% lower cost of ownership at 1000 hrs versus s compettiti itive material handl dlers The Tere e x Fuchs Tel e ematics System for real time fleet and equipment metrics to manage it all Plus you can always rely on your local Terex Fuchs distributor to keep your material handlers operating at peak efficiency, with Tere e x certified parts and trained service technicians.

Deptford, NJ 856-227-6400 ERB EQUIPMENT COMPANY www.erbequipment.com 200 Erb Industrial Dr. Frenchtown, NJ Fenton, MO 63026 908-824-4200 636/349-0200 Foristell, MO 636/463-2500 Lionville, P PA A Cape Girardeau, MO 610-363-9200 573/334-0563 Cuba, MO Staten573/885-0500 Island, NY Owensboro, 718-4 718 448 4 8-24 2444 44 KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

Chadwick-Baross Chelmsford, MA 800-804-0775

COMPANY WRENCH www.companywrench.com Bangor, ME 4805 Scooby Lane NW 800-698-4838 Carroll, OH 43112 866-262-4181 4510 East 71st Caribou, MEStreet Cleveland, OH 44105 800-270-2547 440-439-4567 920 Deneen Avenue Westbrook, W estbrook, M ME Monroe, OH 45050 513-649-8105 800-262-5 800 262-5714 714

Concord, N H 603-224-4063

Edward Ehrbar Inc. Yonk o ers, NY 914-738-5100

Holbrook, NY 631-563-7600

For more information on Terex Fuchs material handlers, contact your local Terex Fuchs distributor or visit us at terex.com/construc ction

New Yo ork City, NY 718-626-3331 Danbury, CT 203-743-0088

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 41

BUILDING A BETTER WORK FORCE ONE CANDIDATE AT A TIME

Marc Murphy, VP of Construction

WHEN YOU NEED QUALITY, BUT CAN’T AFFORD TO WAIT Our placement success in the construction disciplines spans the entry-level, middle and senior management and executive levels in the following areas: Project Managers and Superintendents Project Sales Engineers Controls and Project Engineers Estimators Service and Project Sales Construction Managers

CFOs, CEOs, CDOs General Managers Service Managers Sales Managers Sales Training Managers

CONSTRUCTION

Corporate Headquarters 1275 Drummers Lane, Suite 103 • Wayne, PA 19087

Call Today: 610-941-0100 • Email: info@magellangroup.com

www.magellangroup.com

Page 42 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

MORE M POOWERR reliable, undeniable performanc ce. With Doosan Portable Power e on your side, you can Make Power Moves. See the full lineup at DoosanPowerMoves.com/Portab blePower.

Roland Machinery Co.

Central Power Systems & Services

www.rolandmachinery.com Bridgeton, MO (314) 291-1330 Cape Girardeau, MO (573) 334-5252 Columbia, MO (573) 814-0083 Palmyra, MO (573) 769-2056 Portage, IN (219) 764-8080 Bolingbrook, IL (630) 739-7474

Carterville, IL (618) 985-3399 East Peoria, IL (309) 694-3764 Marengo, IL (815) 923-4966 Springfield, IL (217) 789-7711 DePere, WI (920) 532-0165 DeForest, WI (608) 842-4151

Eau Claire, WI (715) 874-5400 Franksville, WI (262) 835-2710 Schofield, WI (715) 355-9898 Slinger, WI (262) 644-7500 Escanaba, MI (906) 786-6920

www.cpower.com Corporate Colby, KS 9200 Liberty Drive (785) 462-8211 Liberty, MO 60468 Great Bend, KS (816) 781-8070 (620) 792-1361 ALP Air, Light, Power Liberal, KS Liberty, MO (620) 624-7274 (816) 415-6700 Salina, KS Joplin, MO (785) 825-8291 (417) 726-5373 Wichita, KS Maryland Heights, MO (316) 789-7370 (314) 427-4911 Woodward, OK Springfield, MO (580) 256-6014 (417) 865-0505 Yukon, OK (405) 324-2330

MAKE POWER MOVES.

Brandeis Machinery & Supply Company www.brandeismachinery.com 1801 Watterson Trail Louisville, KY 40299 (502) 491-4000 Corbin, KY (606) 528-3700 Lexington, KY (859) 259-3456 Paducah, KY (270) 444-8390

Stanville, KY (606) 478-9201 Evansville, IN (812) 425-4491 Fort Wayne, IN (260) 489-4551 Indianapolis, IN (317) 872-8410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 43

Kirby-Smith Machinery Inc.

Manitowoc crawler cranes are built to o deliver unsurpassed productivity and a value on the most ch hallenging jobsites. Manitowoc delivers: Cranes ranging fro om 73 t (80 USt) to 2300 t (2535 USt) Capacity-enhancing ng VPC-MAX® technology and ® MAX-ER attachments ments

He H eigh htt ab bov ve g groun o nd m

www.kirby-smith.com 12920 Gravois Road St Louis, MO 63127 314/729-0125 12321 E. Pine Street Tulsa, OK 74116 918/438-1700 4617 Powell Street McAlester, OK 74501 918/310-1550 6715 W. Reno Ave. Oklahoma City, OK 73127 405/495-7820 8320 Ruby Ave. Kansas City, KS 66111 913/850-6300

60,0

60 56

54,0

52 48,0

48 44

42,0

40 36,0

36 32

30,0 0

28 24 20

Optional long-reac ch booms, fixed jibs, luffing jibs and extended upper bo oom points

16 12

8,24 m TAILSWING TA

New 3.5 m wide bo oom inserts for MLC300 and MLC650

1,52 , m 2,67 m

Access current Manitowoc crawler crane load charts at www.cranelibrary.com

Cleveland Crane & Shovel Sales, Inc. www.craneandshovel.net 26781 Cannon Road Cleveland, OH 44146 440/439-4749 • 800/362-8494 aforepaugh@craneandshovel.net

Hayden-Murphy Equipment Company www.hayden-murphy.com 9301 E. Bloomington Freeway Minneapolis, MN 55420-3410 952/884-2301 • 800/352-2757

Manitowoc MLC650 — features the ne w 3.5 m w id e b o o m s y s t e m t o r e a c h h ig h e r a n d increase capacit y.

w www .manitowoc.com

Page 44 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

KOBELCO-USA.COM

Tyler Equipment is the Volvo Construction Equipment 2019 Dealer of the Year for its commitment to customer service, business success and strong culture.

Volvo Construction Equipment Names Tyler, Housby as 2019 Dealer Winners Volvo Construction Equipment has named Tyler Equipment its 2019 Dealer of the Year in North America. The company also awarded Housby Heavy Equipment the title of 2019 Uptime Dealer of the Year. The Dealer of the Year award recognizes the dealership in North America that best promotes the Volvo brand and the company’s core strategies: to provide the highest uptime in the industry, offer unique customer solutions and ensure the best value at any stage in a machine’s lifecycle. Massachusetts-based Tyler Equipment’s commitment to those areas contributed to its outstanding performance last year by growing general purpose equipment retail market share by 37 percent and road machinery equipment market share by 25 percent for the products it serves in its territory. “Being in business for 98 years speaks for itself. The team at Tyler focuses on the customer first, and that’s exactly as it should be,” said Stephen Roy, senior vice president Region North America. “They understand what it means to be a unique solutions provider and focus on customer uptime.” Tyler Equipment was founded in 1922 and still has third- and fourthgeneration family members at work. With more than 50 employees, the company provides sales, service, parts and rentals across southern New England. Its strong family culture, dedication to building and fostering longterm customer relationships and promoting the Volvo brand have resulted in tremendous gains, according to the manufacturer. “It’s an honor to be the Volvo Dealer of the Year,” said M. Brooke Tyler III,

Mid Country Machinery

Southeastern Equipment Co., Inc.

3478 5th Ave S Fort Dodge, IA 50501 800-206-5936

Corporate Office 10874 East Pike Rd. Cambridge, OH 43725 740-432-6303

4734 Sergeant Road Waterloo, IA 50701 319-234-8710

1356 3rd Street Brilliant, OH 43913 740-598-3400

106 8th Stree Sergeant Bluff, IA 51054 866-539-8106 www.midcountrymachinery.com

1500 Industrial Parkway Brunswick, OH 44212 330-225-6511 6390 Shier-Rings Rd. Dublin, OH 43016 614-889-1073 228 SR 7 North Gallipolis, OH 45631 740-446-3910

Miller-Bradford & Risberg, Inc. W250 N6851 Hwy 164 Sussex, WI 53087 262-246-5700 Fax: 262-246-5719

president. “We’re dedicated to serving our customers with a personal touch, and we value the relationships we’ve built. For Volvo to recognize that just confirms it’s the right way to do business.” Spotlight on Uptime The Uptime Dealer of the Year award recognizes the North American dealership that demonstrates Volvo’s commitment to being the No. 1 uptime provider in the construction industry, including with its new service commitment pledge to provide customers unrivaled service and support. With Des Moines, Iowa-based Housby Heavy Equipment, these are not just words. Housby's actions prove its dedication to keeping its customers up and running. One example is keeping a fully stocked parts department, which allowed it to achieve 98 percent parts availability in 2019. Another is the outfitting of nine Mack trucks to use as service trucks to help improve customer uptime. “From our expertly trained service staff to our dedicated customer service

representatives, from our large parts inventory to our mobile lube truck, we are set up to help keep our customers on the job and productive,” said Kelly Housby, president of Housby Heavy Equipment. “Uptime is a priority for our customers, and it’s our priority, too. When we took over the Volvo CE distributorship, our focus was to hire the best parts and service team, followed by a great sales team, and build a culture that totally supports uptime with the integrity and care of the entire organization.” Housby joined the Volvo CE dealer network in 2017 and has represented Mack Trucks since 1969. The solid reputation for service that it has earned as a Mack dealer is replicating across its growing construction customer base. “Housby’s dedication to continually improving customer service and uptime are increasingly setting them apart from their competition. They are truly partners in making sure machines are working when they need to be,” Roy said. For more information, visit www.volvo.com. 

26580 St. Rt. 7 Marietta, OH 45750 740-374-7479

DeForest, WI 608-222-9191

8757 Tyler Blvd. Mentor, OH 44060 440-255-6300

Eau Claire, WI 715-832-3443

404 Breaden Rd. Monroe, OH 45050 513-539-9214

De Pere, WI 920-338-5800

Housby Heavy Equipment has earned the title of Volvo 2019 Uptime Dealer of the Year.

3875 W Fourth St Mansfield, OH 44903 419-529-4848

Marathon, WI 715-443-6000 Negaunee, MI 906-475-4181 www.miller-bradford.com

6415 Promler Ave. N. Canton, OH 44720 330-494-3950 27207 N. Dixie Hwy Perrysburg, OH 43551 419-874-0331 7444 Enterprise Park Circle Evansville, IN 47715 812-476-7321 3333 W. Coliseum Blvd. Fort Wayne, IN 46808 260-483-8868

Ronson Equipment Co, LLC 18030 Wicker Ave. Lowell, IN 46356 219-696-5680 Fax: 219-696-5690 10761 West Coulter Road Westville, IN 46391 219-785-2909 www.ronsonequipment.com

4951 West 96th St. Indianapolis, IN 46268 317-872-4877 1982 Florence Pike Burlington, KY 41005 859-586-6133 1776 S. Cedar Street Holt, MI 48842 517-694-0471 48545 Grand River Novi, MI 48374 248-349-9922 1505 Hebron Rd. (Rt. 79) Heath, OH 43056 740-522-3500 www.southeasternequip.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 45

Blue Ridge Tractor

Illinois Truck & Equipment Co.

6923 Mine Five Rd. Benton, IL 62812 618-527-8673 www.brtractor.com

320 Briscoe Drive Morris, IL 60450 800-941-2133 Fax: 815-941-1486 www.iltruck.com

General Equipment & Supplies, Inc. 4600 Valley Industrial Blvd. Shakopee, MN 55379 952-224-1500

3901 N. Lewis Ave. Sioux Falls, SD 57104 605-336-9000 www.genequip.com

Page 46 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Turner Mining Offers Full Spectrum of Contract Services TURNER from page 1

Realizing that the bulk of that workforce would be retiring before long, he left the family business. “I saw where the industry was going … and where it really needs to go.” He envisioned creating a professional service to fill the gap — but he put a revolutionary spin on it, leading a new wave of young entrepreneurs destined to change the way things are done.

eral deposits are removed. Surface mining is commonly used to extract sand, gravel, stones, aggregates, coal, iron, gold and other metals. Turner does not currently engage in underground mining, which requires shafts and tunnels. In addition, the company offers a full spectrum of services, including overburden removal, drilling and blasting, crushing and screening and reclamation — either ongoing to keep a site clean or final service to restore the earth to permitting specifications. They also offer specialty earthwork services, such as plant site grading, green field develop-

tial and upward mobility.

Taking Inventory Results soon followed. Turner now partners with about 30 dealers to rent and lease equipment, although he acknowledged making some “strategic purchases.” It’s hard to find big excavators in the rental market, he pointed out. “They’re expensive to rent and to move. Most dealers don’t want a milliondollar machine on the rental books for long.” When it comes to bulldozers, anything “D8-size” and above, they buy, but they rent Contract Mining a lot of Cat D6s because “they’re easy to Borrowing from Amazon’s contractorrent.” based model, Turner set out on his misDespite acknowledging that sion to make life better for the industry price and product features are by establishing a nationwide company very similar across the top of miners outsourced to individual sites brands and claiming no brand on an as-needed basis. This format loyalty, preferring to do business empowers mine owners to optimize prowith people, rather than blindly duction as their needs and resources adhere to any brand, Turner said fluctuate. Cat has good resale value, so he Contract mining is more common in buys Cat dozers and excavators. Australia, South America and other “We buy the 349 and 374 and remote areas where it’s hard to get a run them five years,” he said. workforce in. “Then, we sell to make some “Mining companies own mines or the money back.” rights to extract the material,” Turner Haul trucks are a necessary said, “but some of them don’t want to fly evil, Turner grumbled. “They’re people in and out.” monsters to maintain. They’re There are few mom-and-pop compaalways breaking nies, he said, and even the big compa- At the age of 27, Keaton Turner wanted to “make mindown.” He prefers nies may have a lot of quarries scattered ing sexy again,” so he decided to “take a swing” at across state lines, making scaling diffi- launching a contract mining company. cult. “Mom-and-pops buy equipment and ment and silt pond management. Getting his new business started was a work in a given area, but moving a D8 to tough sell at first, he recalled. “Prospective another state is expensive.” Add to that, the local workforce usually clients laughed.” It wasn’t easy for a new company with a doesn’t want to work far from home. “A couple of U.S. companies are doing it, young CEO to get good employees, clients but it’s not their main income,” he said, or bank loans … or to convince equipment adding that “big infrastructure companies — dealers to send equipment. But, he said, heavy highway — dabble in it,” but that no he “relentlessly pursued innovative ways to get the job done.” other big company is fully into mining. To scale quickly, he needed a bank Turner became the driving force for partner willing to take risks. “It all change when he founded his company in hinges on results,” he said. For March 2017. “We want to change the game, banks, that means a quick change the stigma.” ROI and profits. For mine owners, it’s safety Game Changer When Turner started his company, he and being on time relied on mining experience and a vision of and on budget. what the future of mining could be. For employees, Believing in a need for a coast-to-coast con- it’s career potentract mining operation, he instituted a fullservice, people-focused provider, integrating partners who furnish equipment and financing. Turner Mining Group provides all mining activities from green site startup to final reclamation, although that includes surface mining only: strip mining, open-pit mining and mountaintop removal mining in which the rock and soil overburden on top of min-

to rent them do the dealer owns and maintains them, but he has purchased some. Speaking at a roundtable, he reiterated that relationships take precedence over brand. “I’m not going to walk around ConExpo and look at equipment and all of the new features and products that are going to move dirt in the same way they did two or three years ago. What I really care about is relationships. Who’s going to be there when the machine goes down? Because it’s going to go down. It’s all great equipment, but it’s all going to break, so the differentiating factor is the relationship.” Technology Along with the heavy equipment required to work in mining, Turner integrates the latest technology where applicable. Anticipating being able to operate equipment remotely in a few years, he currently uses GPS technology and has a drone program for volume surveys. “When you open a new mine, the client pays according to how much material we move. We count truckloads, but we need a better method.” Explaining that some trucks are too big to weigh, which also takes valuable time away from the cycle — an average of 30 seconds each for 300 trucks or more — he said that drones can estimate material amounts within a couple of percentage points by flying over before and after the work. It’s cheap and fast, he said. Smart people keep pace with technology and evolving regulations, he added. “When you look at where the industry’s headed, there’s a lot of technology. It will see TURNER page 54

Turner Mining Group offers specialty earthwork services, such as plant site grading, green field development and silt pond management.

SECTION

Attachments Pages 47-51

For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

Attachments’ Critical Role in Day-to-Day Productivity Attachments play a critical role in the day-to-day productivity of contractors who operate crawler or wheel excavators. Beyond traditional excavator buckets, some contractors who work on everyday excavating and grading tasks add a hydraulic quick coupler to their excavators. A hydraulic quick coupler allows the excavator operator to easily change attachments without leaving the excavator cab. If the excavator operator can easily change buckets, the operator is more likely to use the proper size for trenching applications, ensuring the trench is at the optimal width. A common attachment used in construction, particularly in land clearing, site development and demolition is a thumb, also known as a hydraulic clamp. The excavator operator can combine the

thumb with a bucket to grab, lift and dump materials. For example, a contractor who is clearing land for a new development can load organic debris in a grinder to be processed. Doosan excavators come with a hydraulic flow control to make it easier for operators to ensure they are using the proper flow amount for the corresponding attachment. From a dial on the excavator’s control console, the excavator operator can change the auxiliary hydraulic flow rate for one-way flow attachments (e.g. breaker) or two-way flow attachments (e.g. thumb). A switch on the excavator’s control panel allows operators to switch one-way or two-way hydraulic flow for simplicity. Attachments such as a thumb help excavator operators work more efficiently because they can

Attachments such as a thumb help excavator operators work more efficiently because they can do more than dig with the machine. The bucket and thumb attachment combination enable the operator to grab objects, lift them and load them into a truck, for example.

If the excavator operator can easily change buckets, the operator is more likely to use the proper size for trenching applications, ensuring the trench is at the optimal width.

do more than dig with the machine. The bucket and thumb attachment combination enable the operator to grab objects, lift them and load them into a truck, for example. When it comes to excavator attachment technology, there is a lot of work being done today with rotating and tilting accessories for use with excavators. Accessories like these help excavator operators be more versatile with their machines and enable them to work more efficiently because they may not need to reposition the machine as often. Some excavator manufacturers provide the necessary hydraulic piping to the end of the arm to allow for easy connections

between the machine and the attachment. Operators inside the excavator cab have precise control of the attachments, using the machine’s joystick controls. Minnesota contractor Matt Quinnell of Advanced Wall Systems pairs a Doosan crawler excavator with a hydraulic rotating grapple to lift, rotate and place boulders to build elaborate retaining walls. “I can pick up rocks that are 11 or 12 tons, even with our big grapple on the end of the arm,” Quinnell said. “The Doosan machines have enough power to manipulate the rocks. For more information, visit DoosanEquipment.com. 

Page 48 • June 27, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Can Your

Mini-Excavator... Quick Change from Excavator...

Do This? To Rigid Boom, Universal Skid-Steer Tool Carrier!

It Can Now! XBoom Coupler® System

(800) 526-8538 Amulet.com

Available for most late-model brands up to 13K-Lbs

John Deere Debuts TC-Series Trenchers Designed to fit the needs of construction, agricultural and landscaping professionals, John Deere debuted two new trencher models, the TC36 and TC48, to its family of attachments. The newly introduced TC36 and TC48 trenchers are ideal economic models for lighter-duty tasks and equipment rental, according to the manufacturer. These attachment models are compatible on John Deere skid steers and compact track loader models, as well as most competitive models. “We continue to expand our collection of time and costsaving attachments by incorporating cutting-edge solutions that benefit our customers on the job site,” said Jessica Hill, program manager, global attachments at John Deere. “The TC-series trenchers are an ideal solution to not only increase productivity, but also to increase uptime and lower daily operating costs while producing perfectly-shaped trenches.” The TC-series trenchers are designed for lower duty-cycle customers in agricultural and light construction applications with several configurations to match most soil conditions or trench requirements. To ensure enhanced productivity, the TC36 and TC48 trenchers come equipped with a spring-loaded trencher boom that reduces system shock. The carefully designed frame provides easy ingress and egress during use. The crumber boom pulls loose soil into the trenchers, leaving a clean bottom, and an auger removes spoils from trenches, increasing productivity on the job.

Another key quality of the TC36 and TC48 trenchers is the ability to increase the operator’s uptime, according to the manufacturer. The robust digging chain can be used for even the toughest conditions and the integrated skid shoe helps stabilization while trenching. The angle indicator provides customers an optimal trenching angle for more accurate and precise digging. By incorporating a low-profile drive system and sideshift, trenches will be nearly flush after every use. The multiple digging chain options combined with the low-profile drive system and side-shift help incur lower daily operating costs. For more information, visit www.johndeere.com. 

By incorporating a low-profile drive system and side-shift, trenches will be nearly flush after every use.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 27, 2020 • Page 49

BR RING SA AFETY, INNOVA I VATION T & DURABILITY Y TO YOUR O JOB B SITE ESCO loader buckets are precision engineered and d feature the Ultralok® too oth system that provides safer and easier tooth replacement. ment. Combined with premium mium materials and skilled d fabrication, ESCO delivers vers one of the most durable, high-performance gh-performance buckets available.

Ultralok® Tooth o System y

ESCO Manganese Crusher Wear e r Parts

General Equipment & Supplies, Inc.

Howell Tractor and Equipment, LLC

www.genequip.com

www.howelltractor.com

4300 Main Avenue • Fargo, ND 58103 800-437-2924

480 Blaine Street • Gary, IN 46406 800-852-8816 2770 May Road • Peru, IL 61354 815-224-3003

www.esco.weir .

Copyrig ght ©, WEIR and the WEIR Logo are trademarks demarks and/or registered trademarks off We eir Engineering Services Ltd.

Page 50 • June 27, 2020 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • June 27, 2020 • Page 51

ESCO Ultralok Points Available for Continuous Edge Applications Contractors are in a unique position with the wide range of applications and digging conditions they encounter. The ability to quickly adapt their equipment to match upcoming job requirements is key to efficiency and lower operating costs. There is often a need for a continuous edge to provide a smooth floor in pipeline, foundation excavation and other similar applications. ESCO’s Ultralok Tooth System now offers a series of easy-to-change tooth options that can quickly convert construction buckets to a continuous edge configuration. Select Ultralok construction sizes will be expanded to include four new continuous edge point profiles — right-hand and left-hand corners, a standard center point and a wide center point. The Ultralok U30, U35, U40 and U45 are all avail-

able with the new points shapes to convert buckets to a continuous edge profile. The distinctive integral hammerless lock of the Ultralok system allow the continuous edge points to be installed and removed quickly as conditions demand — saving time, maintenance costs and ensuring the right configuration for the job at hand. For more information, visit www.esco.weir. 

Page 52 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Improving Safety, Efficiency: Goals of WisDOT’s I-39/90 Reconstruction Project BRANDEIS MACHINERY & SUPPLY COMPANY

WISDOT from page 1

To date, nine of the 11 interchanges have been completed, including the first DDI in Wisconsin, which opened in 2016. Twenty miles of the Interstate between Madison and Edgerton have been widened to three lanes and are open to traffic. More than 100 bridges also are complete. WisDOT has committed to maintaining two lanes in each direction during construction. “This is one of the largest highway projects undertaken in south-central Wisconsin,” Theisen said. “The biggest challenge we’ve had is rebuilding the Interstate while still maintaining live A $1.2 billion Wisconsin interstate project under construction since 2015 is now two-thirds completed.

The WisDOT Interstate 39/90 project stretches 45 mi. from the Illinois border to the U.S. 12/18 interchange in Madison.

traffic. It sees 60,000 vehicles every day; and during summer months, 70,000. We’re expanding to three lanes for the summer months. “An interesting thing about the Interstate is that it is the main gateway to Wisconsin. There are two main ways into the state, I-39/90, as well as I-94 between Racine up to Milwaukee. Rebuilding a gateway to Wisconsin improves mobility not only for tourism but also for commerce and the movement of goods. The Interstate sees 35 percent truck traffic. Traffic projections show the Interstate traffic increasing to 80,000 vehicles per day by 2040.” The heavy traffic volumes have caused significant congestion and safety concerns, he said. There were an average of 1,876 crashes along the stretch of Interstate from 2012 to 2015. Of those, 591 resulted in injuries and 11 in fatalities. In an effort to keep the construction zone safer, WisDOT worked early on

in the project with first responders and continues to do so. “We worked extensively with first responders before construction started to explain traffic staging and access points,” Theisen said. “If there is a crash, the first responders get to it more efficiently and in a timely manner to keep traffic moving. We have had some crashes in the work zone, most are

property crashes caused by distracted drivers, people looking at their phones, or speeding through the work zone. We’ve also reduced the speed limit from 70 to 60 mph in early March. We have seen crashes in the work zone and there have been a couple fatalities. One was related to speeding, one to inclement weather.” Last month, motorists got a firsthand look at an impressive piece of equipment when contractors brought in a 600-ton crane to set 26 pre-stressed concrete girders. They were able to get the job done in one night over about seven hours.. “That was something the contractor brought in to be more efficient,” Theisen said. The project is scheduled for completion in 2021, a year earlier than originally planned due to a 2018 infusion of $32.7 million from the state.  CEG

Project Facts Facts about the material used and the infrastructure completed through 2019: ● More than 4,170,000 yds. of base aggregate ● 56 sign structures ● More than 18,300 cu. yds. of high-performance concrete ● Nearly 41,800 cu. yds. of concrete masonry ● 43 retaining walls ● More than 1.75 million sq. yds. of concrete pavement ● 34 box culverts

www.brandeismachinery.com 1801 Watterson Tr. Louisville, KY 40299 502/491-4000 Evansville, IN 812/425-4491 Corbin, KY 606/528-3700 Lexington, KY 859/259-3456 Stanville, KY 606/478-9201 Paducah, KY 270/444-8390 Indianapolis, IN 317/872-8410 Ft.Wayne, IN 260/489-4551

ROAD BUILDERS MACHINERY & SUPPLY CO., INC. www.roadbuildersmachinery.com 1001 S. 7th St. Kansas City, KS 66105 913/371-3822 Omaha, NE 402/331-9200 Lincoln, NE 402/325-0447 Grand Island, NE 308/384-2620 Norfolk, NE 402/316-2606

GENERAL EQUIPMENT & SUPPLIES, INC. DIESEL MACHINERY, INC. www.dieselmachinery.com 4301 N. Cliff Avenue Sioux Falls, SD 57104 605/336-0411 800/456-4005 Aberdeen, SD 605/725-4364 888/762-6312 Rapid City, SD 605/348-7438 800/658-3047

CONTINENTAL EQUIPMENT CORP. www.ceceq.com 3600 N. Grand River Ave. Lansing, MI 48906 517/321-8000

www.genequip.com 4300 Main Ave Fargo, ND 58103 800/437-2924 905 20th Avenue SE Minot ND, 58701 800/852-0479 3500 Apple Creek Road Bismarck, ND 58504 800/279-4437 4082 2nd Ave. W Williston, ND 58801 701/572-0570

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 53

ROAD MACHINERY & SUPPLIES CO. www.rmsequipment.com 5633 W Hwy 13 Savage MN 55378 952/895-9595 800/888-9515 Duluth, MN 218/727-8611 800/888-9535 Virginia MN 218/741-9011 800/752-4304 Des Moines IA 515/282-0404 800/555-1445 Sioux City IA 712/252-0538 800/633-9104 Cedar Rapids IA 319/363-9655 800/616-6615 East Moline, IL 309-755-7203 800-633-9114

ROLAND MACHINERY CO. www.rolandmachinery.com 816 N. Dirksen Parkway, Springfield, IL 62702 217/789-7711 Bolingbrook, IL 630/739-7474 Carterville, IL 618/985-3399 East Peoria, IL 309/694-3764 Marengo, IL 815/923-4966 Portage, IN 219/764-8080 Escanaba, MI 906/786-6920 Bridgeton, MO 314/291-1330 Cape Girardeau, MO 573/334-5252 Columbia, MO 573/814-0083 Palmyra, MO 573/769-2056 DePere, WI 920/532-0165 DeForest, WI 608/842-4151 Eau Claire, WI 715/874-5400 Franksville, WI 262/835-2710 Schofield, WI 715/355-9898 Slinger, WI 262/644-7500

“THEY JUS ST WORK BETTER! W A TRUSTEED NAME. “At Selge Constrruction, we’re a family business. ss. We’ve a wide range of pprojects, built on a foundation of integrity knowledge and qquality workmanship. Selge hass gained respect throughout the Midwest for the highest quality work built in the safest way possiible. Komatsu builds a quality product that performs as prom mised and helps us get the job done. Th why Komatsu woorks for me!”

Marv Selge ge / Selge Construction, Inc. / Niles, MI

That’s t s why hy I am K Koma matsu ts komatsuamerica.com

Page 54 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Turner CEO: ‘My Biggest Lessons Are People, Not Equipment’ TURNER from page 46

likely change and adjust the labor pool.” Use of technology means the difference between success and failure. “It will squeeze the unprofessional out. Momand-pops will struggle to keep up with safety.” Turner said some of the big international companies are already imposing their own safety regulations. His company has implemented safety policies that are tougher than MSHA’s and include daily safety audits. “For us, safety is beyond compliance.” Mines are overseen by Mine Safety and Health Administration, which institutes national regulations and typically visits sites twice a year to confirm compliance. In addition to MSHA, each state has addi-

Turner Mining Group provides all mining activities from green site startup to final reclamation, although that includes surface mining only.

He recruits people who are eager to travel and live elsewhere, and he’s hired people from all 50 states — of every race, religion and expeIn addition, Turner Mining Group offers a full spectrum of rience level. “We want services, including overburden removal, drilling and blast- good human beings first. They can be ing, crushing and screening and reclamation. trained to do the job.” tional regulations they must follow. Training is intense and expensive, and “California is like a different country,” he consists of a mixture of rigorous onsite, said, “with air quality measure and other classroom and online education. “It’s the state-mandated rules.” tough part,” he confessed. “It’s easy to get Virginia and West Virginia had so many people in the door. It’s a little bit harder to fatalities in coal mines, they instituted the train them.” Department of Mines, Minerals and Energy New miners spend an average of four to oversee mining operations. “Some states days in training to work at a Part 48 mine. are easier to work in than others.” Part 48 includes all underground mines, surface coal mines and some surface metal/nonEmployees metal mines. Part 46 designates very specific Two years ago, Turner had seven employ- types of mines. Gold, specialty minerals, ees. Today, the number hovers around 300, aggregates and sand all require different and continues to go up as he signs new cus- training. “They require site-specific training tomers. “All of it came from Instagram, to deal with traffic, hazards and other Facebook and LinkedIn,” he said. things,” Turner said. He likes to share what his company does Recognizing that experienced and knowlon social media and even participates in pod- edgeable workers will be retiring over the casts. next 10 years, Turner likes to mix old and “We could do all of the cool stuff behind new employees, pairing experienced the scenes and live in the shadows, but I’m employees with trainees or other employees going to share the growing pains. There are on their way up the ladder to transfer knowla whole lot of cool things to share. I don’t edge. His first employee was an older man think we would even be sitting here if we from the Kentucky coal mines. “He was a bit didn’t share what we were doing.” rough, but we taught him how to train

employees.” Identifying talented employees eager to move into management roles, Turner often appoints assistant project managers. “Assistant project managers are project managers in training, getting experience on the job. It helps us scale when we need to. It’s hard to steal a manager from one job for another, but an assistant manager can move up to a new project.” Retention also is a challenge. It may be the equipment showcased on Turner Mining’s social media that draws attention, but the young entrepreneur promises images of people getting their hands dirty. “[Our people] are the ones who are doing the work and getting up at 4 a.m. We try to show them off to the industry and their peers. There are a lot of young people who [appreciate] a shout-out on Instagram, so that’s what we try to do. We really want to make the people the heroes of our story.” Job Duties Training is crucial for safety reasons and productivity, but it’s also critical for employee career paths because Turner believes in letting the “best players play, no matter how much experience they have.” He doesn’t keep a seniority list. There is no waiting line. His operating manager is just 26 years old, in an industry where most are 45. Passion, hard work, talent and results are rewarded. He’s not afraid to move people around,

either. “I put people in positions to do what they’re good at,” Turner said, explaining that he recently moved people around to better use their skills — or to put them where they’re needed. In the mountains of upstate New York, the season runs April to September. After that, the crew moves to Texas or Florida for the winter. Job length ranges from three months to five years. Turner said there are even some 10-year contracts out there. Three-month seasonal routine jobs recur annually. While these short jobs can be harder than long contracts due to the brevity of time, he views them as opportunities to showcase the company’s ability. After three years, there are still hard lessons. “My biggest lessons are people — not equipment, material or deadlines,” Turner said. Sometimes he has to remove an employee from a site where they are not needed. For example, on a “simple project” involving a three-year contract to mine sand — “no drilling or blasting; easy digging” — he put the wrong person in charge. The man overseeing the work had a management style that was so hands-off, Turner said there was almost no management at all. Deadlines were missed, which had financial consequences. He took charge of the situation and replaced him to save the project. He applies the same standards to himself. Considering himself “a sales guy,” the boss has a passion for hunting for new clients and business opportunities, but he recently hired someone to take on that role in order to free himself up for strategic planning. “Passions change,” he shrugged. “I love being on site and interacting with our people, but I’ve had to shift from day-to-day operations to future vision. What are the threats to the business? What do we need to be doing? Where should we be?” Ultimately, he said, Turner Mining is a people company that moves dirt, not a mining company. “My goals are not financial; they’re people goals. If we lose track of people, we lose track of the company. Life is short, I want to impact as many people as I can.” He hopes to grow his company enough to support 1,000 employees. Fortunately, because mining is considered an essential business, there have been no work stoppages this year. In fact, he said, “business is booming.” After all, he added, “if it’s not farmed, it’s mined.” Meanwhile, Turner will continue pushing boundaries and applying integrity and ingenuity to make mining more efficient, safer, more lucrative and … sexy.  CEG

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 55

Howell Tractor www.howelltractor.com 480 Blaine Street • Gary, IN 46406 219/810-6327

Construction Machinery Company Illinois Truck & Equipment www.iltruck.com 320 Briscoe Drive • Morris, IL 60450 815/941-1900

www.cmcky.com 2911 S. English Station Rd. • Louisville, KY 40299 502/267-4020 • 866/901-2262 2235 Ragu Drive • Owensboro, 42303 Dealer Im mprintKYAr ea 270/683-2000 • 877/683-2262 267 W. Jay Louden Rd. • Carrollton, KY 41008 502/732-4661

Kelbe Brothers Equipment Co., Inc.

Kirby-Smith Machinery, Inc.

www.kelbebros.com 12770 W. Silver Spring Drive • Butler, WI 53007 262/373-2151

www.kirby-smith.com 8320 Ruby Avenue • Kansas City, KS 66111 913/850-6300

4621 Dutch Mill Rd. • Madison, WI 53716 608/221-8300 3101 French Rd. • DePere, WI 54115 920/343-6496

Page 56 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

KENTUCKY DIAMOND EQUIPMENT

MICHIGAN MILLER-BRADFORD & RISBERG, INC.

www.diamondequipment.com Bowling Green 270-781-1061

www.miller-bradford.com Negaunee 800-562-9770

OHIO CAT

OHIO OHIO CAT

www.OhioCAT.com Richwood 888-446-4658

WILSON EQUIPMENT COMPANY www.wilsonequipment.com Lexington (Corporate Headquarters) 859-254-6443 Corbin 606-528-0700 Prestonsburg 606-874-8036

MO ORE TH HAN |

MINNESOTA ZIEGLER CAT

Exodus Machines Welcomes Brian Hawn as New Vice President of Service Exodus Machines announced the expansion of its leadership team with the appointment of Brian Hawn as the new vice president of service. Exodus welcomes Hawn and his experience to oversee parts and service for Exodus Machines and its divisions — BladeCore, Connect Work Tools, OilQuickUSA and ShearCore. “I could not be more pleased Brian chose to join our team,” said Kevin Boreen, Exodus Machines CEO. “After our first meeting, I knew he was the perfect addition to make our management team even stronger. He brings with him nearly 15-years of experience in the demolition and scrap recycling equipment industries and has earned the trust and respect of dealers, vendors, end users and coworkers.” “I am thrilled to join the Exodus family. As soon as I met the team, I quickly related to and felt like I Brian Hawn

fully understood their vision on customer service. It was clear that Exodus was where I needed to be,” said Hawn. “The stateof-the-art factory and innovative way of manufacturing is the perfect combination for Exodus and its branches to excel within all the industries they serve.” About Exodus Machines Started in 2008, on the shores of Lake Superior in Superior, Wis., Exodus Machines manufacturers and distributes products under four divisions — BladeCore, Connect Work Tools, OilQuickUSA and ShearCore — for both the domestic and international scrap, demolition and construction markets. In addition, Exodus Machines provides full service, parts and rebuild services, including support of material handlers. 

www.ZieglerCAT.com Minneapolis 800-352-2812 Brainerd 877-829-9850 Buhl 800-446-9795 Columbus 866-982-5656 Crookston 800-422-5782 Duluth 800-421-3831 Fergus Falls 800-346-7649 Jackson 866-847-6401 Marshall 800-325-4929 North Mankato 877-845-3938 Rochester 800-247-1068 Shakopee 800-352-2812 St. Cloud 800-522-9469

www.OhioCAT.com Broadview Heights 800-837-6200 800-633-1020 (Rental) Sharonville 800-332-4658 (Sales & Service) 888-736-8440 (Rental) Columbus 888-441-4658 (Sales & Service) 888-736-8441 (Rental) Perrysburg 888-339-4658 (Sales & Service) 888-736-8442 (Rental) Troy 888-330-4658 Youngstown 800-837-6203 Cadiz 800-837-6204 (Sales & Service) 866-639-2283 (Rental) Canton 800-837-6207 (Sales & Service) 888-736-8443 (Rental) Lima 567-242-6831 (Rental) Zanesville 800-837-6205 (Sales & Service) 800-209-1331 (Rental)

WISCONSIN MILLER-BRADFORD & RISBERG, INC www.miller-bradford.com Sussex 800-242-3115 Deforest 800-585-7219 Eau Claire 800-585-7232 DePere 800-638-7448 Marathon 888-886-4410

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 57

ILLINOIS DIAMOND EQUIPMENT www.diamondequipment.com Mt. Vernon 618-242-2273

INDIANA MACALLISTER MACHINERY SALES/RENTALS www.macallister.com Indianapolis 317-545-2151 Indianapolis 317-244-RENT (7368) Fort Wayne 260-483-6469 (heavy equipment) 260-969-3322 (rental store) Lafayette 765-449-8191 (heavy equipment) 765-446-5600 (rental store) Terre Haute 812-478-3155 (heavy equipment) 812-231-6000 (rental store) South Bend 574-288-6622 Washington 812-254-1712 Bicknell 812-735-0286 Bloomington 812-349-9220 Fishers 317-598-9700 Greensburg 812-663-5829 Richmond 765-966-0626 Yorktown 765-759-2CAT (2228)

DIAMOND EQUIPMENT www.diamondequipment.com Evansville 812-425-4428

IOWA ZIEGLER CAT Altoona 800-342-7002 Atlantic 877-547-3819 Sioux City 712-252-4401 Fort Dodge 800-342-1848 Mason City 800-342-1849 Postville 800-526-0889

Now Available with Tier 4 Final

Trucks & Trailers

SECTION

Pages 58-63

To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

Mack, ATA Team Up With ALAN to Deliver Vital Aid, Goods To assist those impacted by the coronavirus pandemic, Mack Trucks and the American Trucking Associations (ATA) are partnering with the American Logistics Aid Network (ALAN) to deliver vital supplies, such as food and personal-care items, to nonprofit organizations who distribute these goods locally. “In good times and bad, the trucking industry moves nearly three-quarters of our nation’s freight, helping ensure crucial supplies are delivered where they are needed,” said Martin Weissburg, president, Mack Trucks. “Working in partnership with ATA and ALAN enables us to more effectively marshal resources and deliver supplies to organizations addressing the needs of local communities across the country.” Two model year 2019 Mack Anthem models, which Mack provided to the ATA as part of its sponsorship of the Share the Road and Workforce Heroes programs, are now delivering shipments of supplies between nonprofit organizations, including Feed the Children and Joshua’s Heart Foundation, among others. Professional truck drivers from ATA member companies have volunteered their time to make the deliveries.

Since the ATA’s Share the Road wrought by Hurricane Katrina in and Workforce Heroes live safety 2005,” said Elisabeth Barna, and career education efforts have executive vice president, industry been postponed or cancelled due affairs, ATA. “At that time, our to shelter-in-place requirements Share the Road Mack Pinnacle and other safety precautions, axle back model made its maiden Mack and ATA released both voyage to New Orleans with a truckload of water.” Anthem models to make deliverALAN was contacted in April ies coordinated through ALAN. by Feed the Children, a leading “Given all of the supply chain hunger relief organization fightchaos surrounding COVID-19, it ing to end childhood hunger by would have been easy for these organizations to press the pause distributing food and other essenbutton on their charitable program tials for daily living through its until the crisis was past,” said network of community partners Kathy Fulton, ALAN’s executive across the country. As the director. “But we’re so thankful response to the coronavirus panthey didn’t, because trucking is demic began impacting traditionalways one of our non-profit part- The Mack Anthem Workforce Heroes model is helping deliv- al distribution efforts, Feed the ners’ biggest needs. And these er vital supplies. Children began looking for soluvehicles are allowing us to support tions to ensure its tens of thouthem with transportation resources during a sands of pounds of food and beverages, permany relief efforts in a really big way.” The partnership between the ATA and crisis. In addition to connecting non-profits sonal care items and laundry detergent locatALAN traces back several years and in need with transportation solutions, ALAN ed in its LaVergne, Tenn., warehouse made through several natural disasters. ALAN, helps humanitarian organizations make its way swiftly to non-profit partners around the country. It was critical to them to make which was founded in 2005, provides sup- every logistics dollar count. “ATA’s relationship with ALAN dates to sure the ever-growing needs of those affectply-chain assistance to disaster relief organizations and other non-profits by connecting their creation, following the devastation ed by the pandemic could be met. One of those community partners is the Miami, Fla.-based Joshua’s Heart Foundation. Founded in 2005 by a then 4year-old Joshua Williams, the organization is dedicated to the fight against global hunger and poverty. “Our mission is to empower needy people to improve their quality of life by providing them necessities like groceries and personal items,” said Williams, Joshua’s Heart Foundation founder and chief changemaker. “Like all organizations, the pandemic has affected our ability to receive and distribute goods, making the shipments from Feed the Children through ALAN critical to our efforts.” Mack and ATA will continue to coordinate transport solutions with ALAN until demand subsides. For more information about ALAN, visit https://www.alanaid.org/. To learn more about Feed the Children and the Joshua’s To assist those impacted by the coronavirus pandemic, Mack Trucks and the American Trucking Associations (ATA) are part- Heart Foundation, visit https://feedthechilnering with the American Logistics Aid Network (ALAN) to deliver vital supplies, such as food and personal-care items, to non- dren.org and https://joshuasheart.org. To profit organizations who distribute these goods locally using the ATA Share the Road (pictured) and Workforce Heroes Mack learn more about ATA, visit Anthem models. www.trucking.org. 

Construction Equipment Guide â€˘ Trucks & Trailers Section â€˘ www.constructionequipmentguide.com â€˘ June 27, 2020 â€˘ Page 59

Â Â? Â? Â? Â? Â?

Â Â

Â Â Â€

Â€ Â€

Â?

Â‚

Â? Â? Â? Â? Â? Â? Â? Â Â

Farm-Rite Equipment Inc. Dassel 901 Parker Ave West PO Box 26 Dassel, MN 55325 320-275-2737 Toll Free: 888-679-4857 Willmar 1515 West Litchfield Ave. Willmar, MN 56201 Toll Free: 877-484-3211 320-235-3672 St. Cloud 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 Toll Free: 844-262-2281 320-240-2085 www.farmriteequip.com

McCann Industries, Inc. Addison 543 South Rohlwing Road Addison, IL 60101 630-627-0000 Bolingbrook 250 E. North Frontage Road Bolingbrook, IL 60440 630-739-7770 Chicago 2350 South Laflin Street Chicago, IL 60608 312-942-9200 Crestwood 4701 West 137th Street Crestwood, IL 60445 708-597-3110 McHenry 4102 W. Crystal Lake Road McHenry, IL 60050 815-385-0420 Mishawaka 14077 Esther Ave. Mishawaka, IN 46545 574-406-6800 Merrillville 900 Louisiana Street. Merrillville, IN 46410 219-576-7800 Schererville 1133 Indianapolis Boulevard Schererville, IN 46375 219-865-6545 Wauconda 1360 North Rand Road Wauconda, IL 60084 847-526-9444 Marne 1064 Franklin Street Marne, MI 49435 616-371-7250 www.McCannOnline.com

Diamond Equipment, Inc. Indiana 1060 E. Diamond Ave. Evansville, IN 47711 Toll Free: 800-258-4428 812-425-4428 2000 Harlan Drive Terre Haute, IN 47802 Toll Free: 888-343-4747 812- 299-4747 Illinois 17035 N. Illinois Hwy. 37 Mt. Vernon, IL 62864 Toll Free: 800-388-6396 618- 242-2273 Kentucky 1046 Lovers Lane Bowling Green, KY 42103 Toll Free: 800-489-1061 270-781-1061 Tennessee 1530 Heil Quaker Blvd. La Vergne, TN 37086 Toll Free: 800-635-9454 615-641-1100 www.diamondequipment.com

Ziegler CAT 8000 County Road 101 East Shakopee, MN 55379 800-352-2812 13822 West Freeway Drive Columbus, MN 55038 866-982-5656 2225 255th Street St. Cloud, MN 56301 800-522-9469 1500 Ziegler Drive NW Altoona, IA 50009 800-342-7002 53 Harbor Drive Sioux City, IA 51111 800-342-1847 www.zieglercat.com

Alta Equipment Company Bryon Center, MI 616-878-7450 New Hudson, MI 248-356-5200 Traverse City, MI 231-714-6210 Detroit, MI 313-394-1811 Flint (Burton), MI 810-744-4840 Gaylord, MI 989-731-9988 Sterling Heights, MI 568-474-5063 Bloomington, IL 309-585-3800 Spring Grove, IL 708-547-7300 Ottawa, IL 815-313-2070 www.altaequipment.com

Â? Â? Â? Â? Â Â?

Page 60 • June 27, 2020 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

TruckIT’s New Platform Built for Heavy Civil Supply Chain TruckIT, a construction technology firm specializing in dispatching and electronic ticketing solutions, has launched a comprehensive upgrade to its technology suite. The UI/UX redesign of the Web Portal and Mobile App contains several enhancements and new features, including TruckIT’s paperless ticketing system with mobile capability for DOT inspectors. TruckIT’s team identified several opportunities for product improvement during ongoing customer conversations. “We pride ourselves on remaining customer-centric,” said Yogi Patel, VP of technology at TruckIT. “User feedback carries incredible influence and weight, especially when it comes to critical product improvements such as the Web and Mobile App experience.” The new Web Portal and Mobile App were built to mirror the same design and feature capabilities, allowing users to operate them interchangeably in the office or on

“We pride ourselves on remaining customer-centric. User feedback carries incredible influence and weight, especially when it comes to critical product improvements such as the Web and Mobile App experience.” Yogi Patel TruckIT

the job. Additionally, the new TruckIT platform is a more intuitive tool to navigate. Highlights include: • Simplified Dispatch Workflows: Drag-and-drop capabilities for easy truck assignment and fleet management. Built to deliver critical data to dispatchers to fill orders quickly with available drivers. • Unified Mobile App and Redesign: The only mobile app in the industry covering every stakeholder in the hauling supply chain (driver, dispatcher, contractor, and DOT inspector). The Mobile App includes the full capabilities of the

Web Portal, such as easy dispatching directly for your mobile device. • Centralized Project Reporting and Analytics: All reporting and detailed summaries stay in one place. Access DOT Daily Report Summaries and Bid Item Summaries, export job data, and view project performance within your secure profile 24/7. • Enhanced Load Material Monitoring: Understand material delivery logistics with real-time driver activity, turn time ETAs, and material tracking for delivery and pickup insights. The new platform includes TruckIT’s DOT compliant E-

Ticketing solution, a frontrunner in the digital advancement of material delivery logistics and safety. It operates as a fully automated electronic ticketing system, eliminating the complications of paper ticket handling for every role in the hauling supply chain -drivers, scalehouse operators, foremen, DOT inspectors and back office personnel. AirTicket, an add-on component of TruckIT’s E-Ticketing software, easily integrates directly with any existing scalehouse system. The technology provides instant access to securely stored ticket data for all personnel involved, while allow-

ing drivers to remain in the comfort of their cabs. Not only does TruckIT’s cloudbased platform adhere to job safety, it guarantees complete data protection, a concern many industry leaders have while adopting new technologies. “Change is inevitable as we start to see the positive impact from easy-to-use E-Construction tools throughout our industry,” said Pace Davis, CEO at TruckIT. “Our new technology suite represents this simplicity, but it was also built to ensure the protection of user data. We believe data privacy is a critical component of technology advancement for heavy construction. With data security at the forefront of development, our team has gone to great lengths to provide a secure and trustworthy platform.” TruckIT’s Mobile App is available in the Apple App Store, Google Play Store, and via TruckIT’s website. Download the app at www.truckit.com/app. 

Fleet Advantage Announces New Sale-Leaseback Program Dodge Ram Tough Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.

Gas-2500, Ready for Plow

2 Ram 5500 4x4 108 c/a. please call for spec

2020 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group

NEW PROMASTERS HERE & IN TRANSIT

COMMERCIAL HEADQUARTERS Jeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444 All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change Jarret Petsch 952-469-7063 jpetsch@jeffbelzer.com

John Zadurski 952-469-6817 jzadurski@jeffbelzer.com

Fleet Advantage announced a new Sale-Leaseback program designed to infuse cash and flexibility into transportation fleets. Fleet Advantage developed this program to help fleet organizations substitute for lost revenues during the current COVID-19 pandemic. In Fleet Advantage’s Sale-Leaseback program, a company can select the assets from their fleet that are older models, which are inefficient and more unreliable, and Fleet Advantage will purchase those assets and lease them back to the fleet for an interim period until they can then transition to new equipment when ready. This enables organizations to generate cash in the near term, which is especially critical today given the COVID-19 pandemic and strain it has placed on companies and the economy. The cash gained can then be used for immediate internal needs or to simply provide extra working capital.

Combating Economic Fallout Without Compromising Future Growth The transportation fleet industry has continued to look for ways to absorb the sharp economic decline as a result of the pandemic. The SaleLeaseback program allows for the downsizing of fleets if an organization has a surplus of trucks, and it will have a positive effect on the bottom line P&L since the ensuing lease payment will be lower than the current depreciation charge. “We’re launching this program to help our clients with transportation fleets realize an immediate infusion of cash and flexibility into their organizations,” said John Flynn, CEO of Fleet Advantage. “Having additional cash on hand is critical for today, but the flexibility to upgrade to newer truck technology with advanced safety features tomorrow will help fleets come out of the pandemic with a significant competitive edge through financial and operational efficiencies gained.” For more information, visit www.fleetadvantage.com. 

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • June 27, 2020 • Page 61

What can you haul in a side dump trailer? Nearly anything.

Superior Stability

Faster Cycle Times

Easier Unloading

With construction grade tires and an ability to haul dirt, rock, millings, riprap and other materials, our trailers help solve the everyday challenges of the construction industry. When we build trailers, we build solutions. 800-779-8099 • sidedump.com

Page 62 • June 27, 2020 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Ford Marks 35 Years of Commercial Vehicle Leadership With Upgrades

www.aisequip.com 3600 North Grand River Avenue Lansing, MI 48906 517-321-8000 600 44th Street S.W. Grand Rapids, MI 49548 616-538-2400 65809 Gratiot Avenue Lenox, MI 48050 586-727-7502 4600 AIS Drive P.O. Box 253 Bridgeport, MI 48722 989-777-0090 8300 M-72 East Williamsburg, MI 49690 231-267-5060 56555 Pontiac Trail New Hudson, MI 48165 248-437-8121

Ford F-600 delivers the capability of a Class 6 truck in a familiar Class 5 package, giving a new choice to fleets and vocational customers who need additional payload or want to mount heavier upfits without moving into a bigger truck.

Ford marks 35 years by adding even more customer-driven options to its F650 and F-750 Medium Duty trucks and E-Series cutaway and stripped chassis. “We are just as passionate about the success of our customers’ businesses as they are,” said Mark Buzzell, Ford director of fleet, lease and remarketing operations. “So, we have devoted decades to developing deep insights into their wants and needs. This focus has led us to create a winning portfolio of commercial vehicles that our customers love and rely on every day.” One of Ford’s latest innovations, the all-new F-600 Super Duty chassis cab, is now available to order. Ford F-600 delivers the capability of a Class 6 truck in a familiar Class 5 package, giving a new choice to fleets and vocational customers who need additional payload or want to mount heavier upfits without moving into a bigger truck. It will be available for delivery summer 2020. For customers who prefer alternative fuels, Ford is offering a gaseous fuel prep package for its new 7.3-liter V8 gasoline engine in current model year Super Duty F-450, F-550 and F-600 chassis cab, Medium Duty, E-Series and F-53 and F-59 stripped chassis vehicles. The package includes upgraded valvetrain components to withstand higher operating temperatures and lower lubricity of gaseous fuels so the

vehicle can be converted by a Ford Qualified Vehicle Modifier to run on CNG or propane. Air Power Offered for Medium Duty Ford sold more of its biggest work trucks last year than it has since 1997. Sales of F-650 and F-750 are up 37 percent year-over-year, with total volume of 16,510 trucks for 2019. Building on this momentum, Ford further enhances the versatility of its Medium Duty trucks for model year 2022 with a new option for the available 7.3-liter gas engine. For the first time, an integrated air compressor will be available for the 7.3-liter engine. The compressor can be used to power air brakes, air suspension and other accessories like air horns or air ride seats. Currently, air brakes are only available on diesel-powered trucks. Ford offers a choice of gasoline or diesel engine for Class 6-7 conventional cab trucks — its 7.3-liter gas V8 or updated 6.7-liter Power Stroke diesel V8. Ford Medium Duty trucks with the 7.3-liter gas engine can cost up to $9,245 less than those with the 6.7-liter diesel, according to the company. They are recommended for applications with lighter duty cycles, annual mileage and torque requirements. Adding the air compressor to the 7.3-liter engine lets customers combine the cost savings of

a gasoline powertrain with the stopping power of air brakes. “We expect this new offering to be popular in several vocational segments including propane delivery, municipalities, utilities and tree service,” said Nathan Oscarson, Ford commercial truck brand manager. “Many customers have told us they’d like to take advantage of the cost savings provided by a gas truck, but they also want the peace of mind provided by air brakes.” Ford E-Series Gets More Flexible, But Passengers Don’t Have To Fleets looking for an affordable solution to meeting alternative fuel goals will see new choices with 2022 ESeries cutaways and stripped chassis as Ford adds available flex fuel capability for the 7.3-liter V8 gasoline engine in both premium and economy calibrations. E-Series with flex fuel capability can run on gasoline or blends of up to 85 percent ethanol, or E85. Ford expects this to be a popular option for state and federal fleets. Also new for E-Series cutaway next year is a scalloped engine access cover that provides additional legroom, in response to customer requests primarily from the recreational vehicle industry. E-Series is the most popular platform for Class C motorhomes, with 58 percent market share. 

www.brookstractor.com 1900 West Main Street Sun Prairie, WI 53590 608-837-5141 12101 W Silver Spring Dr. Milwaukee, WI 53225 414-462-9790 1031 Lawrence Dr. De Pere, WI 54115 920-336-5711 5429 Prairie Dr. Plover, WI 54467 715- 254-2777 1609 SE Frontage Road Mt. Pleasant, WI 53177 262-898-6700 455 West Ave. North West Salem, WI 54669 608-786-2644

Construction Equipment Guide â€¢ Trucks & Trailers Section â€¢ www.constructionequipmentguide.com â€¢ June 27, 2020 â€¢ Page 63

,?7,90,5*, @6< *(5 ;9<:; 8<(30;@ ;/(; 0: 796=,5 <RX NQRZ ZKDW \RX QHHG WR KDXO )HOOLQJ KDV WKH WUDLOHU WR JHW LW WKHUH :LWK RYHU \HDUV FRPELQHG LQGXVWU\ VDOHV H[SHULHQFH ZH KDYH WKH DQVZHUV WR \RXU VSHFLDOL]HG WUDLOHU QHHGV

?- /+. ? -69*, )\PS[ [V ZWLJ ^P[O ^VVK PUSHPK Â¢ HWW_ [Y\UUPVU HWWYVHJO ^P[O IVS[ VU ^OLLS JV]LYZ JLU[LY [Y\UUPVU HUK THPU KLJR JLU[LY ^VVK PUSHPK Â» ^VVK PUSHPK ILH]LY[HPS HUK YHTWZ )VSK @LSSV^ WHPU[ ZWHYL ^OLLS [PYL TV\U[LK [V NVVZLULJR

9LVLW ZZZ IHOOLQJ FRP &(* &DOO _ (PDLO WUDLOHUV#IHOOLQJ FRP

www.lanoequip.com 6140 Highway 10 NW Anoka, MN 55303 763-323-1720 888-448-5266

www.lanoequipofnorwood.com 1015 Highway 212 West Norwood Young America, MN 55368 952-467-2182

3021 West 133rd Shakopee, MN 55379 952-445-6310 23580 Highway 55 Loretto, MN 55357 763-479-8200

www.mnequipmentsolutions.com 13725 Main Street Rogers, MN 55374 763-428-4107

www.farmriteequip.com 901 Parker Ave. West PO Box 26 Dassel, MN 55325 888-679-4857 320-275-2737 1515 West Litchfield Ave. Willmar, MN 56201 877-484-3211 320-235-3672 810 Mayhew Lake Rd. NE St. Cloud, MN 56304 844-262-2281 320-240-2085

www.ditchwitchnd.com 1100 W. Main Ave. West Fargo, ND 58078 701-282-3600 877-282-3600 2921 Twin City Dr. Mandan, ND 58554 701-663-9551 877-663-9551

1400 W. Ogden Ave. Naperville, IL 60563 630-355-7150

www.westsidetractorsales.com 1560 North Old Rand Rd. Wauconda, IL 60084 847-526-7700

7355 East 30th St. Indianapolis, IN 46219 317-544-3411

150 W. 162 St. Route 6 South Holland, IL 60473 708-331-6362

600 Walnut Ct Rockdale, IL 60436 815-730-9011

3021 South 460 East Lafayette, IN 47905 765-477-6933

3110 Prairie Rd. Rockford, IL 61102 815-961-3160

1095 N Curry Pike Bloomington, IN 47404 812-333-9677

25166 State Road 2 South Bend, IN 46619 574-232-1461

3120 Congressional Pkwy Fort Wayne, IN 46825 260-482-8576

3773 E Margaret Drive Terre Haute, IN 47803 812-645-7160

Page 64 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 65

The Easy Way To Advertise Your Equipment Run In Two Consecutive Issues Black & White $135 • Color $195

2019 Takeuchi TB210R, OROPS (foldable), 12 HP Kubota diesel,digging bucket, 5' 9" dig depth, 2 speed, 254 hrs.................................................$19,730 13-14 JM Call Steve 262-373-2151

2020 Takeuchi TW65-2, Enclosed ROPS, 73 hp 4 cyl Deutz diesel, Cab w/ heat & A/C, 11,354 lbs operating weight, 175 hrs .......................................$77,540 13-14 JM Call Steve 262-373-2151

2019 New Holland C237, Cab w/ heat & A/C, Enclosed ROPS, 74 hp FPT diesel, 2 speed, 2,590 lbs operating capacity, 230 hrs .......................$47,450 13-14 JM Call Steve 262-373-2151

2007 Link-Belt 290 X2, Enclosed ROPS, Cab with heat, 10' 5" stick with 23' 4" dig depth and 35' reach, 207 HP Isuzu ...................................................$52,000 13-14 JM Call Steve 262-373-2151

2007 Komatsu WA200-5, 127 HP, 23,400 # Operating Weight, EROPS, HEAT, AC, Bias Tires, Mono-Lever Hyd, Quick Cplr, New Paint, Price Includes 2.5 CU YD Bucket..........................$65,000 13 PK Call Dan Rude 605-336-0411

2005 Case 445, s/n N5M401377, 2950 Hours, ROPS with side windows (no front door), two speed, ride control manual front coupler, 76" TAK bucket w/HD tooth bar, 12 X 16.5 tires and spare ... .....................................................................$18,500 13 JM call STEVE @ 630-878-8765

Bobcat E42, includes 12” & 36” buckets. Starts and runs well. ..............................................$40,000 Call Kevin @ 630-510-6050 13 JM

2006 Ditch Witch SK650, 2700 Hours, Good Condition .. ....................................................................Call For Price 13-14 EB Call Tania 614-443-9751 x237

2001 Grove TMS 500E, 40 Ton, 95’ Main Boom, 26’-45’ Jib, 3 Sheave Block, 68,000 Miles, 10,112 Hrs, 1 Owner Machine, Fresh Grove Paint, Cleveland, Ohio .............................................CALL Call Andy Forepaugh 216-316-1511 13-14 EB

2005 Linkbelt HTC 8660, 60 Ton Cat C-11 Engine, 13512 Hours, 110’ Main Boom, 56’ Jib, Aux Hoist , 3 Sheave Block, Ball Current Certification, Original Owner................................................Call for Price Call Andy Forepaugh 216-316-1511 13-14 EB

2015 New Holland W80C, s/n P00483, 864 Hrs, Radio, A/C, Heat, Front & Rear Work Lights, Auto Ride Control, Cold Weather Pkg, Air Seat, Standard Aux. Hyd., Deluxe Cab, Return to Dig and Bucket .................................................$62,000 dwietbrock@ronsonequipment.com 13 JM

Sentry Tires - Skid Steer and Wheel Loader Tires at Volume Buyers Prices! Call Company Wrench for Sizes & Pricing Call 866-294-6103 13-14 EB

2018 Case SR270, s/n NHM435461, 1770 Hours, Cab with Heater & Air, Two Speed Mechanical Controls, Hydraulic Coupler,12X16.5 Ties 78" Heavy Duty Dirt Bucket...............................$33,500 13 JM Call Steve @ 630-878-8765

2017 DD120C, w/Intelligent Compaction and Pass Counting, #7540 ...........................................$97,000 13 JM 800-283-1336

2016 Hyundai HX160L, One owner, 10’ 2’’ Long arm, 137 HP Perkins Engine, 3,300 hours...$72,000 13 JM Call George 219-696-8911

1998 Ingersoll Rand DD24 Roller #8308, #8308 ... ......................................................................$6,750 800-283-1336 13 JM

2015 Leeboy 8500C, s/n 122257, 2750 Hrs,

2007 DD138HF Roller, (s/n: 194909) 4300 Hours, Paving Width 8’-15’, Heated Screed, Legend 84” Drum Width, #5671................................$22,500 Screed System ............................................$59,900 13 JM 800-283-1336 Call Steve @ 630-878-8765 13 JM

Here's how the BARGAIN ADS Work: • Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number. • Either email your copy & photo to: production@cegltd.com, or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034. • Cost is $135 per ad, $60 additional for color. • Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.

2015 LeeBoy 8510C Paver, #8165 ...........$58,750 800-283-1336 13 JM

For more information, call Construction Equipment Guide today at 800/523-2200

Page 66 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Attention Contractors! Post Your Wanted To Buy Listings FREE! Here’s How! List Your Wanted Items

If you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted

WANTED (US): BATTERY BOX FOR A KOMATSU PC170LC-11. EMAIL: MROBERSON@ LYLEMACHINERY.COM PHONE: 601-624-1124 –––––––––––––––––––––––––––––––– WANTED (FL): MORBARK 4600XL GRINDER. EMAIL: RKCLANDDEVELOPMENT@ATT.NET –––––––––––––––––––––––––––––––– WANTED (FL): TRANSMISSION FOR EARLY '90S VINTAGE P&H CENTURY RT50. EXISTING IS A SHINKO RCM2509B S/N 0005. PARTS OR SUBSTITUTE TRANNY OR ENGINE/TRANS CONSIDERED. EMAIL: MIKE.SMITH@ CERTIFIEDBOOMREPAIR.COM PHONE: 813-247-1963 –––––––––––––––––––––––––––––––– WANTED (CA): BOBCAT T550 COMPACT TRACK LOADER. EMAIL: CINDYLARK4@MSN.COM –––––––––––––––––––––––––––––––– WANTED (PA): REXWORKS INC MAXIGRIND 425 GRINDER. EMAIL: HENRYINDUSTRIES@YAHOO.COM; PHONE: 814-371-8010 –––––––––––––––––––––––––––––––– WANTED (PA): FORD F700 HOOK LIFT TRUCKS - WORM GEAR AND SHAFT ASSEMBLY FOR COMPACT MODEL H-L SIDE-O-MATIC BOOM UNLOADER COMPACT 2 7-63-5C DICO CONTINUOUS SERIES. EMAIL: INFO@LESNEYCONCRETE.COM PHONE: (724) 224-8703 –––––––––––––––––––––––––––––––– WANTED (USA): HYUNDAI ATTACHMENTS - LOOKING FOR A GOOD USED GP BUCKET 4-6 CU.YD. FOR A 1996 HYUNDAI HL770 LOADER. EMAIL: DONNIE@RADIATIONCLEANTECH.COM; PHONE: 601-319-9453 –––––––––––––––––––––––––––––––– WANTED (NY): BANDIT 65 WOOD CHIPPER - USED BRUSH BANDIT 65XP, 75XP, 2002 OR NEWER, 35HP MINIMUM. EMAIL: DSPTECH11@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): HITACHI EX400LC-1 EXCAVATOR EMAIL: ILYAS.MTCPK@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED: LOOKING FOR 1000LB FRONT COUNTERWEIGHT FOR CASE 455C CRAWLER LOADER. EMAIL: ROGERPF1@FRONTIERNET.NET; PHONE: 570-639-3058 –––––––––––––––––––––––––––––––– WANTED (US): CAT 311, 312, 315, 320, 325, 330, 336 CL,DL,EL EXCAVATORS UNDER 8000 HOURS. EMAIL: REBUILD@TUSCO.NET; PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: AMPHIBIOUS EXCAVATORS, ALL MAKES AND MODELS, NEW OR USED + ALL MAKE AND MODEL BOOMS AND STICKS LONGER THAN NORMAL + ALL MAKE AND MODEL BROKEN BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 ––––––––––––––––––––––––––––––––

WANTED (US); LOOKING FOR PILOT VALVE 9137384 FOR HITACHI 200LC-3 EXCAVATOR. EMAIL: PJUREKX1@GMAIL.COM; PHONE: 585-492-2449 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR OFFHIGHWAY TRUCKS - I NEED #5 CAT 775D &E ROCK BEDS ONLY. ONLY NEED BEDS. EMAIL: WEBBPAGE1@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): CONCRETE PUMPS WANTED - SCHWING, PUTZMEISTER, ALLIANCE, CIFA, ETC. ALL MODELS, BRANDS, SIZES. OLD OR NEW! BOOM PUMPS,TRAILER & TRUCK MOUNTED CITY PUMPS PURCHASED. OLD RETIRED, NO LONGER USED & PARTS PUMPS ALSO PURCHASED. EMAIL INFORMATION A.S.A.P. INSTANT PAYMENT GUARANTEED !! FINDERS FEES PAID!!! EMAIL: BBENEDETTO@COMCAST.NET –––––––––––––––––––––––––––––––– WANTED (PA): I’M LOOKING FOR A PUSH THERMOPLASTIC MACHINE. CAN BE ANY BRAND. EMAIL: HELLOELISA@ICLOUD.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 330-336 DL SERIES EXCAVATORS EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (RI): CATERPILLAR 4+ MISCELLANEOUS EQUIPMENT. I AM HELPING A FRIEND TO FIND A PART FOR HIS CAT MODEL 426, SERIAL #7BC02647, PART #9R383. IT WOULD BE REALLY HELPFUL IF THIS PART WAS AVAILABLE IN EASTERN USA, ESPECIALLY IN THE NORTHEASTERN STATES, AND AVAILABILITY, PRICE, AND SHIPPING ARE IMPORTANT IF THE PART IS AVAILABLE ELSEWHERE. THANK YOU FOR YOUR HELP. EMAIL: JOETTAKIRK@AOL.COM –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): CATERPILLAR D8R CRAWLER DOZER. LOOKING FOR ORIGINAL 2018 D8R CATERPILLAR BULLDOZER. EMAIL: ARABHURUR@GMAIL.COM; PHONE: +251-911513133 –––––––––––––––––––––––––––––––– WANTED (SC): ALL MODELS BRADCO TRENCHING / BORING / CABLE PLOWS; LOOKING FOR 3 PT HITCH 3 OR 4 FOOT TRENCHER 6" WIDE FOR REAR KUBOTA EMAIL: PEPPERJACKPM@YAHOO.COM; PHONE: 803-460-2600 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS CATERPILLAR EXCAVATORS. LOOKING FOR USED AMPHIBIOUS EXCAVATORS, MARSH BUGGIES AND MARSH MASTERS - ANY BRAND. ALSO LOOKING FOR BROKEN/DAMAGED LR BOOMS AND STICKS. EMAIL: PERCY.RES@GMAIL.COM; PHONE: 215-350-1165 ––––––––––––––––––––––––––––––––

WANTED (US): INGERSOLL RAND AIR COMPRESSOR, MODEL 125 CFM. NEED EXHAUST/INTAKE MANIFOLD FOR A CONTINENTAL G193A GAS ENGINE WHICH IS IN THE I/R GYRO FLOW 125 COMPRESSOR. EMAIL: HFINCHTTD@FONTIERNET.NET –––––––––––––––––––––––––––––––– WANTED (VA): FORD 1920 758B BACKHOE ATTACHMENT. EMAIL: CONWELL1208@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (US): USED HITACHI EXCAVATORS EX200LC,EX270LC,EX400LC. EMAIL: ILYAS.MTCPK@GMAIL.COM; PHONE: +92-332-248-9350 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): 1-FINAL DRIVE & CONTROL VALVE ASSEMBLY, 2-ENGINE WIRING HARNESSES, HOODS, DISPLAY MODULES & ECU'S SN #FGY0381 FOR SAMSUNG SE240 LC-3 EXCAVATOR. EMAIL: TVHCSHOP@GMAIL.COM; PHONE: 920-735-1221 –––––––––––––––––––––––––––––––– WANTED (KS): CAT 922B INJECTION FUEL LINE. I NEED ALL 4 FOR MY 1960'S DIESEL FRONT-END LOADER. EMAIL: BLACKNIGHT64R@ATT.NET –––––––––––––––––––––––––––––––– WANTED: CAT WHEEL LOADER 950B, 950E, 966E, 966F, 966FII. EMAIL: NAQIB_KHAN73@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED: HITACHI EXCAVATORS EX200, EX270LC, EX400, EX400LC. EMAIL: NAQIB_KHANINTRCO@ HOTMAIL.COM. –––––––––––––––––––––––––––––––– WANTED: LINCOLN WELDERS, MODELS 250/300/225. I'D LIKE TO BUY USED MACHINES LOW HOURS. EMAIL: JONATHANDAYTON4@GMAIL.COM; PHONE: 806-292-7452 –––––––––––––––––––––––––––––––– WANTED (CA): JOHN DEERE 330 EXCAVATOR. EMAIL: JIMWLAMBERT@HOTMAIL.COM –––––––––––––––––––––––––––––––– WANTED (NM): BARBER GREENE BG-225B SLAT CONVEYOR, COMPLETE LEFT SIDE. EMAIL: JR_STRIPING@LIVE.COM –––––––––––––––––––––––––––––––– WANTED (US): LOOKING FOR CME 45 WITH DEUTZ DIESEL DECK ENGINE AND AUTOMATIC HAMMER. ANY CONDITION. EMAIL: GEONETICS@BELLSOUTH.NET –––––––––––––––––––––––––––––––– WANTED (IL): HAULOTTE AERIAL LIFT, ALL MODELS. LOOKING FOR A TOWABLE BOOM LIFT. EMAIL: SAWMANDAN@SBCGLOBAL.NET PHONE: 630-553-7612 –––––––––––––––––––––––––––––––– WANTED (MI): ALL MODEL KUBOTA WHEEL LOADERS. EMAIL: CRAIGBERENS944@GMAIL.COM PHONE: 616-813-3642 ––––––––––––––––––––––––––––––––

WANTED (NV): CATERPILLAR 14G MOTOR GRADER. EMAIL: SALES1@HIEEQUIPMENT.COM PHONE: 7025295171 –––––––––––––––––––––––––––––––– WANTED (USA): LOOKIN FOR A GOOD USED KOMATSU PC 400-5 EXCAVATOR EMAIL: FJS-1@ATT.NET PHONE: 724-944-5569 –––––––––––––––––––––––––––––––– WANTED (USA): TAKEUCHI TB0-35 AND 135 WITH CABS. RUNNING OR FOR PARTS. PHONE: 443-392-5789 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS CATERPILLAR COMPACT TRACK LOADERS, USED CATERPILLAR SKID STEER LOADERS 226D, 232D, 236D, 242D, 246D, 262D, 272D, 272D XE. EMAIL: LSGLOBAL@NVER.COM –––––––––––––––––––––––––––––––– WANTED (USA): A GOOD USED C-12 CAT ENGINE FOR A SHORT NOSE 2000 PETERBILT 379 ROAD TRACTOR. ENGINE TO HAVE CORRECT ECM AND S# BEGINS WITH 2KS , 380 MIN. HP. CONTACT JIM ARNETT JARNETTJR@ORBITSDO.COM; CELL# 937-603-3965. –––––––––––––––––––––––––––––––– WANTED (USA): CATERPILLAR D11 CRAWLER DOZERS - INTERESTED IN PARTS FOR LARGE DOZERS FOR COAL MINES AND AGGREGATE QUARRIES. EMAIL: BIGIRONLUNS87@YAHOO.COM –––––––––––––––––––––––––––––––– WANTED (USA): CAT 315,320,325,330,336 DL SERIES EXCAVATORS UNDER 8000 HOURS AND WHOLESALE PRICED MACHINES. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED: TAKEUCHI MINI EXCAVATORS TBO-35’S WITH CABS, RUNNING MACHINES AND/OR PARTS. PHONE: 443-392-5789 –––––––––––––––––––––––––––––––– WANTED (NY): LOOKING FOR USED 5 TON WIRE ROPE HOIST TO RUN ON A PATENT TRACK EMAIL: INFO@ BRIDGEHAMPTONSTEEL.COM PHONE: 631-537-2486 –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR 330C L EXCAVATOR - LOOKING TO BUY CATERPILLAR 330CL & 330DL IN GOOD RUNNING CONDITION. EMAIL: RIZ@MEGAEQUIPMENTS.COM PHONE: 832-528-0786 –––––––––––––––––––––––––––––––– WANTED: ALL MODELS TRENCOR TRENCHING / BORING / CABLE PLOWS. EMAIL:ADMIN@MITCHELLHOPPER.COM PHONE: 432-888-2593 –––––––––––––––––––––––––––––––– WANTED (FL): BOBCAT MT50 COMPACT TRACK LOADERS EMAIL: EIDNKSLJK@ICLOUD.COM PHONE: 6039 2I28 939 ––––––––––––––––––––––––––––––––

WANTED: ALL MODELS CATERPILLAR WHEEL LOADERS. LOOKING TO BUY ANY CAT LOADER AT WHOLESALE PRICE. EMAIL: MARKETING@ GCESEQUIPMENT.COM PHONE: 714-408-1587 –––––––––––––––––––––––––––––––– WANTED (TX): ALL MODELS CATERPILLAR MOTOR GRADERS. EMAIL: MAGDIELLERMA@GMAIL.COM PHONE: 956-432-7379 –––––––––––––––––––––––––––––––– WANTED (USA): ALL MODELS CATERPILLAR WHEEL LOADERS. CAT 966H OR K WITH UNDER 10,000 HOURS, BUCKET, COUPLER. SET OF FORKS IS A PLUS. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED (WV): ALL MODELS TERRAMITE BACKHOE LOADERS - CHECKING PRICES FOR TERRAMITE T7 FRON RIM FOR SERIAL NUMBER 227X0102. EMAIL: EDWINANDDIANA@FRONTIER.COM –––––––––––––––––––––––––––––––– WANTED (FL): CASE CRAWLER DOZERS, ALL MODELS. EMAIL: JABOWEND@GMAIL.COM –––––––––––––––––––––––––––––––– WANTED (USA): KOBELCO K907D EXCAVATORS - MAIN HYDRAULIC CONTROL VALVE (907D) SERIAL #LN7001 TO YG0501. KOBELCO PART # 2436U1165F2, KAWASAKI TAG # KMX15A/23009 ALSO USED ON YUTANI 1986, MODEL 195. EMAIL: PTSCOTT@HTVA.NET –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU ATTACHMENTS - SKELETON BUCKET FOR KOMATSU 220 EXCAVATOR 54" TO 60". CAN ADAPT FROM OTHER MACHINES AS LONG AS ITS 80 MM PINS. EMAIL: FJS-1@ATT.NET PHONE: 724-944-5569 –––––––––––––––––––––––––––––––– WANTED (USA): HYDRA-MAC 1700 SKID STEER LOADER. EMAIL: MALONEYFARM.1@ WINDSTREAM.NET –––––––––––––––––––––––––––––––– WANTED (TX): CATERPILLAR EXCAVATORS, ALL MODELS. EMAIL: PAUL@HEAVYSURPLUS.COM; PHONE: 214-625-2652 –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D5B OR D6C CRAWLER DOZER. EMAIL: JT_FERGUSON_EXC@SBCGLOBAL.NET –––––––––––––––––––––––––––––––– WANTED (CA): CATERPILLAR 970F WHEEL LOADER. EMAIL: SALES3@GCESEQUIPMENT.COM; PHONE: 657-347-6605 –––––––––––––––––––––––––––––––– WANTED (GA): KOBELCO EXCAVATORS, ALL MODELS. MINI- OR MIDIEXCAVATOR. USED. UNDER 2000HRS. CA 35 T0 40 HP FULLY FUNCTIONAL. THUMB EMAIL: JKSAPP@BELLSOUTH.NET ––––––––––––––––––––––––––––––––

WANTED (US): LIMA CRANE – ANY LIMA 2400B MACHINES IN ANY TYPE OF CONDITION. EMAIL: REBUILD@TUSCO.NET –––––––––––––––––––––––––––––––– WANTED (US): CATERPILLAR D8T CRAWLER DOZER. LOOKING FOR MACHINE WITH ISSUES AND/OR HIGHER HOURS, AT A WHOLESALE PRICE. BUYER WANTS MACHINE CHEAPER THAT HE CAN PUT THROUGH HIS SHOP AND REFURBISH AS NEEDED. EMAIL: REBUILD@TUSCO.NET PHONE: 330-987-3508 –––––––––––––––––––––––––––––––– WANTED (US): YANMAR YFW55R DUMPERS - FINAL DRIVE OR A PARTS MACHINE. EMAIL: ORDERS@LEWEQUIP.COM; PHONE: 724-887-9375 –––––––––––––––––––––––––––––––– WANTED (US): GEHL DL-10H-55 TELEHANDLERS / FORKLIFTS - SN # 10H55JR024028 NEED PART # L71553. EMAIL: JEFF.JAEGER@HOTMAIL.COM; PHONE: 345-925-9709 –––––––––––––––––––––––––––––––– WANTED (US): BOBCAT S175 SKID STEER LOADERS; ANY STATE NEAR ARKANSAS WOULD BE HELPFUL. EMAIL: BRIANFITZJURLS@GMAIL.COM; PHONE: 479-847-4202 –––––––––––––––––––––––––––––––– WANTED: LINK-BELT LS-348H CRANE – LOOKING FOR THE BOOM WIRE WRAP FOR A LINK-BELT 348 HYLAB , S/N L9J89965. EMAIL: POWERALEXHEAVY EQUIPMENT@GMAIL.COM PHONE: 386-496-1340 –––––––––––––––––––––––––––––––– WANTED (NH): DYNAHOE 160 BACKHOE LOADERS - I'M LOOKING TO FIND ANY AND ALL INFORMATION ABOUT THIS MACHINE, FORUMS, TROUBLESHOOTING ETC. I HAVE ONE THAT RUNS BUT CAN'T GET IT TO MOVE... HELP PLEASE!! EMAIL: RUSSELLMORRIS66@AOL.COM –––––––––––––––––––––––––––––––– WANTED (FL): ALL MODELS KOLBERG ASPHALT / CONCRETE / PAVING LOCATED IN TAMPA, FL. LOOKING FOR PARTS FOR A VIBRATING SCREEN. KOLBERG SCREEN. SR # VS514DD1113-91. EMAIL: TODD.BUSH@ PREFERREDMATERIALS.COM PHONE: 407-948-6796 –––––––––––––––––––––––––––––––– WANTED (WORLDWIDE): ALL MODELS UPRIGHT WHEEL LOADERS - LOOKING FOR MANUALS AND SPARE PARTS FOR FURUKAWA WHEEL LOADERS, ANY ASSISTANCE WOULD BE GREATLY APPRECIATED. EMAIL: DOUG.KLITSCHER@LIVE.COM.AU; PHONE: +61401627855 –––––––––––––––––––––––––––––––– WANTED (USA): KOMATSU PC400LC-7L EXCAVATOR - HYDRAULIC QUICK COUPLER FOR A 05 PC 400 L7 HD. 100MM PINS. EMAIL: DGMEINER62@GMAIL.COM; PHONE: 315 767-4111 ––––––––––––––––––––––––––––––––

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 67

Auctions are subject to change, please check Auctioneers websites for details ALEX LYON & SON AUCTIONEERS www.lyonauction.com 315-633-2944 • Leesport, PA Sat., June 27, 2020 For: Day 2 of 2. Major Job Completion • Regina, Canada Wed., July 8, 2020 For: Very Large Job Completion • San Diego, CA Thurs., July 9, 2020 For: Largest & Greatest Rental Fleet Equipment Auction • New Waterford, OH Wed., July 15, 2020 For: Part 1 of 2-Day Auction • Cleveland/Akron, OH Fri., July 17, 2020 For: Part 2 of 2-Day Auction in two locations • Cleveland, OH Sat., July 18, 2020 For: Completed Trucking Job • Canastota (Syracuse), NY Fri., July 24, 2020 For: Major Job Completion, Late Model Construction Equipment • Canastota (Syracuse), NY Sat., July 25, 2020 For: Fanciest Late Model Construction Equipment in conjunction with Haycamp & Barbecue!

• White Plains, NY Closes June 29, 2020 For: Westchester County Surplus Vehicle & Equipment Auction BAR NONE AUCTION www.barnoneauction.com 866-372-1700 • Online/Sacramento, CA Sat., July 11, 2020 For: Monthly Public Auction • Portland, OR Fri., July 31, 2020 For: Monthly Public Auction • Sacramento, CA Sat., August 8, 2020 For: Monthly Public Auction BIDADOO AUCTIONS www.bidadoo.com 1-877-BIDADOO • ONLINE ONLY June 30, 2020 • ONLINE ONLY July 7, 2020 • ONLINE ONLY July 14, 2020 • ONLINE ONLY July 21, 2020 • ONLINE ONLY July 28, 2020 • ONLINE ONLY August 4, 2020 • ONLINE ONLY August 11, 2020

RITCHIE BROS. AUCTIONEERS www.rbauction.com 402-421-2631

BIG IRON www.bigiron.com 800-937-3558

All our auctions are now online bidding only!

• ONLINE ONLY July 1, 2020

• Atlanta, GA June 30, 2020

• ONLINE ONLY July 8, 2020

• Salt Lake City, UT June 30, 2020

• ONLINE ONLY July 15, 2020

• Chehalis, WA June 30, 2020

• ONLINE ONLY July 22, 2020

• Fort Worth, TX July 28 - 29, 2020

• ONLINE ONLY July 29, 2020

• Denver, CO August 5, 2020

• ONLINE ONLY August 5, 2020

• Tipton, CA August 12, 2020

Coming Auctions To view information on upcoming auctions visit our Auction Calendar at www.constructionequipmentguide.com DON SMOCK AUCTION CO., INC. www.dsa-auctions.com 765-778-9277

• TIMED ONLINE ONLY Wed., July 22, 2020 For: Construction, Utility Equipment and more

• Fort Wayne, IN Tues., June 30, 2020 For: Summer INDOT Absolute JEFF MARTIN AUCTIONEERS, INC. Auction 4 www.jeffmartinauctioneers.com • Winamac, IN 601-450-6200 Tues., July 7, 2020 For: Summer INDOT Absolute • Kissimmee, FL Auction 5 Sat., June 27, 2020 For: Central Florida Public Auction HENDERSON AUCTIONS www.hendersonauctions.com • Columbus, OH 225-686-2252 Thurs., July 9, 2020 For: Northeast Heavy • Livingston, LA June 25 - 27, 2020 Equipment & Truck Auction For: 3-Day Independence • Stanton, TX Auction Wed., July 15, 2020 For: Permian Basin Unreserved Public Auction HESS AUCTIONEERS www.hessauctioneers.net • Natchez, MS 866-511-2493 Fri., July 17, 2020 • Marietta, PA For: Absolute Retirement Fri., August 14, 2020 Auction For: Trucks, Trailers & • ONLINE ONLY Equipment Tues., July 28, 2020 I.R.A.Y. AUCTION www.iraymn.com 320-968-7230 • ONLINE ONLY Wed., July 29, 2020 For: Heavy Equipment, Truck & Trailer Auction IRON AUCTION GROUP www.ironauctiongroup.com 864-546-1216 • Princeton, WV Thurs., July 16, 2020 For: Construction Equipment, Truck, Trailers & Support Equipment J.J. KANE AUCTIONEERS www.jjkane.com 856-764-7163

For: Vistra/Luminant Online Power Plant Auction • Brooklyn, MS August 7 - 8, 2020 For: Early Fall Construction & Transportation Public Auction • ONLINE ONLY Tues., August 11, 2020 For: Heavy Equipment Auction

McGREW EQUIPMENT COMPANY www.mcgrewequipment.com 888-311-2811 • ONLINE ONLY Tues., June 30, 2020 For: Farm & Construction Equipment Auction

AL: 334-693-2540

• TIMED ONLINE ONLY Tues., June 30, 2020 For: Construction, Utility Equipment and more

• ONLINE ONLY Tues., July 7, 2020 For: Farm & Construction Equipment Auction

• Philadelphia, MS July 15 - 16, 2020 For: Huge 2-Day Public Auction

• TIMED ONLINE ONLY Wed., July 15, 2020 For: Construction, Utility Equipment and more

• ONLINE ONLY Tues., July 14, 2020 For: Farm & Construction Equipment Auction

• Phoenix, AZ August 28, 2020

DEANCO AUCTIONS www.deancoauction.com MS: 601-656-9768

ABSOLUTE AUCTION & REALTY, INC. www.AARauctions.com 800-243-0061

MEEKINS AUCTION COMPANY • Fort Meyers, FL August 7 - 8, 2020 www.meekinsauction.com For: Heavy Equipment, 910-739-0547 Industrial Machinery, Trucks • Lumberton, NC & Trailers, Commercial Tues., June 30, 2020 Vehicles & more For: Construction & Truck Auction MIDEAST EQUIPMENT SUPPLY www.mideastequip.com 860-370-9993 • VIRTUAL ONLINE Tues., June 30, 2020 For: Major Construction Equipment Auction PURPLE WAVE AUCTION www.purplewave.com 866-608-9283 • ONLINE ONLY Wed., July 1, 2020 For: Ag Equipment Auction • ONLINE ONLY Thurs., July 2, 2020 For: Truck & Trailer Auction • ONLINE ONLY Tues., July 7, 2020 For: Government Auction • ONLINE ONLY Wed., July 8, 2020 For: Vehicles & Equipment Auction • ONLINE ONLY Thurs., July 9, 2020 For: Construction Equipment Auction • ONLINE ONLY Wed., July 15, 2020 For: Ag Equipment Auction RITCHASON AUCTIONEERS INC. www.ritchason.com 800-806-3395 • ONLINE ONLY Thurs., July 16, 2020 For: Equipment Parts & Components Auction ROSEN & COMPANY, INC. www.bidrosen.com 216-990-1831 • Cleveland, OH Fri., July 17, 2020 For: Summer Quarterly Heavy Equipment & More ROYAL AUCTION GROUP, INC. www.royalauctiongroup.com 239-936-4121

RTI AUCTIONS www.teitsworth.com 585-243-1563 • ONLINE ONLY July 7 - 14, 2020 For: Equipment from Municipalities, companies & individuals in NY Sate STEFFES GROUP INC. www.steffesgroup.com 701-237-9173 • ONLINE ONLY July 3 - 8, 2020 For: Timed Online Upper Midwest Locations • ONLINE ONLY July 17 - 22, 2020 For: Timed Online Upper Midwest Locations • West Fargo, ND Wed., July 29, 2020 For: AgIron West Fargo Event • ONLINE ONLY July 30 – Aug. 6, 2020 For: Construction Consignment Auction • ONLINE ONLY August 7 - 17, 2020 For: Kibble Equipment Auction VANTAGE AUCTIONS www.vantageauctions.com 951-228-9040 • Live Virtual Auction Sat., July 25, 2020 For: July 2020 Auction WESTERN CONSTRUCTION AUCTIONS INC. www.wca-online.com 866-731-7760 • Perris, CA Fri., August 7, 2020 For: Public Auction

WSM AUCTIONEERS www.wsmauctioneers.com 623-936-3300 • Virtual Online Only Fri, July 11, 2020 For: Public Auction

Page 68 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Iowa Approves $3.6B FY 2021-2025 Transportation Plan The Iowa Transportation Commission approved the Fiscal Year 2021-2025 Iowa Transportation Improvement Program at its meeting on June 9. The program documents investments in Iowa’s multimodal transportation system covering aviation, public transit, railroads, trails and highways. The Commission and the Iowa DOT remain committed to providing modern, safe and efficient transportation services to the public. The program is posted on the Iowa DOT’s website iowadot.gov/program_management/Five-Year-Program. Program Overview A major component of the program is the highway section that documents planned investments in the Primary Highway System for the next five years. For FY 2021-2025, approximately $3.6 billion is forecast to be available for highway right of way and construction. The Commission continues to maintain a balance between rural and urban investment with approximately 55 percent of the $3.6 billion program being invested in rural areas. As a result of significant across-the-board construction cost increases in calendar year 2019, cost estimates were revised for many projects in the program. This limited the funding available for new projects to be

added to the program and a few projects were delayed by one year from the schedule identified in the 2020-2024 program. However, no projects were removed from last year’s program. State road funding is anticipated to drop over the next several months due to travel and vehicle sales reductions as a result of COVID-19 impacts. Without knowing the ultimate impacts on state road funding and potential mitigating factors, this draft Program is based on pre-COVID-19 state funding forecasts. The Commission may adjust the program when more is learned about state and federal funding impacts. The highway section was developed to achieve several objectives. The Commission’s primary investment objective remains stewardship, including safety, maintenance and modernization of Iowa’s existing highway system. More than $2.0 billion is programmed from FY 2021 through FY 2025 for the modernization of Iowa’s existing highway system and for enhanced highway safety features. The program includes more than $1.1 billion of investments in Iowa’s state-owned bridges. Over the last few years, the number of structurally deficient bridges on the state highway system has been reduced from 256 in 2006 to 39 in 2019 as a result of the

Commission’s emphasis to improve the condition of Iowa’s bridges. The Commission and Iowa DOT continue to recognize the importance of maintaining an effective and reliable interstate system. The interstate system connects all transportation systems in Iowa and facilitates the efficient movement of freight within, to/from, and through Iowa. The highway section of the program includes significant interstate investments for six-lane improvements on I-35 in Polk and Story counties; I74 Mississippi River Bridge replacement in Bettendorf; I-80/380 Interchange reconstruction near Iowa City; six-lane improvements on I-80 in Dallas and Johnson counties; I-80 Mississippi River Bridge replacement in Scott County; I-380/Tower Terrace interchange construction in Hiawatha; and the interstate system reconstruction in Council Bluffs. Along with these important interstate projects, the Commission remains committed to previous programming actions by continuing to include important non-interstate projects including Iowa 9 Mississippi River Bridge replacement in Lansing; U.S. 30 in Harrison, Story, Tama and Benton counties; U.S. 52 in Dubuque County; U.S. 61 in Des Moines and Louisa counties; U.S. 63 Oskaloosa Bypass in Mahaska County; and

U.S. 218 in Bremer County. Portions of these investments address stewardship needs. Additional System Enhancement Projects Despite limited funding availability, the Commission was able to add several significant projects that address safety and operational needs. This includes reconstruction of Iowa 2 in Fremont County from the Missouri River overflow bridges to Horse Creek bridges. This project will elevate the roadway to reduce closures during flooding events. This project will be supported with federal emergency relief funding. Other projects added include Super-2 improvements on U.S. 18 in Hancock County and U.S. 30 in Cedar County. Federal Funding A large part of funding available for highway programming comes from the federal government. Accurately estimating future federal funding levels requires a multiyear federal transportation authorization bill. The current authorization bill, Fixing America’s Surface Transportation (FAST) Act, was signed into law Dec. 4, 2015. However, it will expire Sept. 30, 2020, resulting in significant uncertainty about federal funding after this date. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 69

Business Calendar To view our Business Calendar online, go to www.constructionequipmentguide.com. JUNE/JULY 2020 CRANE SAFETY COURSES NEW LOCATIONS! REGISTER TODAY! June 30 – July 1, 2020 Forklift Operator & Inspector Training, Orlando, FL June 30 – July 2, 2020 Aerial Work Platform Train The Trainer, Houston, TX July 7 – July 10, 2020 Mobile Crane Inspector Training, Orlando, FL July 8 – July 10, 2020 Tower Crane Operator & Inspector Training, Houston, TX July 13 – July 14, 2020 Overhead Crane Operator Training, Cincinnati, OH July 13 – July 17, 2020 Mobile Crane Operator Training, Orlando, FL July 14 – July 16, 2020 Rigging Inspector Training, Houston, TX July 20 – July 24, 2020 Overhead Hoist Maintenance Training, Houston, TX July 20 – July 24, 2020 Mobile Crane Train The Trainer, Los Angeles, CA July 21 – July 22, 2020 Qualified Signal Person Training, Orlando, FL July 23 – July 24, 2020 Critical Lift Planning & Lift Director Training, Orlando, FL July 27 – July 31, 2020 INSPECTOR CERTIFICATION COMBOS, Orlando, FL To register and for more information, please call or email Tiffany Alston. Telephone: 800/654-5640, extension 238. Direct: 321/710-4641. Email: talston@cranesafe.com ASSOCIATED GENERAL CONTRACTORS (AGC) AGC’s Three Part Webinar Series: Business Development, Marketing & Proposal Basics for the General Contractor Dates: July 28, 2020 - 2:00pm to 3:00pm Price: Member : $149 Non-Member: $199 Description: The AGC Business Development WebEd Series, brought to the AGC membership by the AGC BD Forum, will be held in May, June and July of this year and will be sure to improve your business by focusing on the basics of Business Development, Marketing and Proposals for the General Contractor. We are confident that by the end of this WebEd Series, you will be more prepared to grow your talent within your company, expand your client map and continuously improve your processes and strategies.. Part One: Basics of Business Development for the Busy General Contractor – May 12, 2020-COMPLETED Part Two: Basics of Marketing for the Busy General Contractor – June 23, 2020-COMPLETED Part Three: Basics of Proposals and Presentations for the Busy General Contractor – July 28, 2020 Most proposals and presentations have 3 things in common; a lot of talk about how great we are; a lot of boiler plate language that says the same thing as our competitors; and Boring, boring, & more boring. All 3 are losing behaviors! In this webinar, we will discuss the following: • Gathering the intel needed to craft a tailored message • Creating a compelling offering around the client’s key issues • Flipping the focus from “Us” to “Them”. • Focusing on the “Benefits” we offer, as opposed to the “Features” • Mastering the use of the Executive Summary • And much more! For more information on the above event, contact AGC of America, 2300 Wilson Blvd. Suite 300, Arlington, VA 22201. Phone: (703) 548-3118. www.agc.org. For computer specifications, please visit https://www.gotomeeting.com/meeting/online-meeting-support or contact webinars@agc.org.

impacting the business of construction. We have also greatly reduced the registration fees for this conference to reflect the virtual delivery format. The cost of registration for this event is: Member Price: $350 • Non-Member Price: $450 Over the course of three days, we will bring you informative presentations, panel discussions and interactive breakouts from remote locations via our virtual conference stage. Attendees can also participate in Q&A with speakers and learn about the exhibitors. And, if you are unable to join us for a specific online session, your registration gives you access to recordings of the education sessions and the opportunity to earn continuing education credits. To register or for more information on the above event, contact AGC of America, 2300 Wilson Blvd. Suite 300, Arlington, VA 22201. Phone: (703) 548-3118. www.agc.org.\ MINNESOTA ASPHALT PAVEMENT ASSOCIATION (MAPA) 7th Annual MAPA Golf Outing When: Monday, August 10, 2020 Time: 10:30 am - 7:00 pm Where: Bunker Hills Golf Club 12800 Bunker Prairie Rd NW Coon Rapids, Minnesota 55448 Save the date! We are ready FORE summer and a great golf event! Mark your calendar for August 10 and get your foursome together as you won’t want to miss this year. We’re back at Bunker Hills! This will be a great networking opportunity for all participants. We are hoping for another great turnout and beautiful August weather. Proceeds will go to the MAPA Scholarship Fund and Academic Institution Donation Fund. The ticket cost for this event is $150 (Before June 24) and $190 (June 24 and After). Ticket includes lunch, green fee, ½ cart, beer/soda on the course, dinner and prizes. Limited to the first 144 players. Visit www.asphaltisbest.com/events to register online or download the registration form. If you need to switch out a member of your foursome after registering, please contact MAPA Event Coordinator, Grace Gothers at graceg@ewald.com. For more information on the above event, contact MAPA, 1000 Westgate Drive, Suite 252, St. Paul, MN 55114. Phone: 651/636-4666. Email: info@mnapa.org. ASSOCIATED BUILDERS AND CONTRACTORS (ABC) ABC Convention 2020 Dates: August 17 – 19, 2020 Place: Music City Center 201 Fifth Avenue South, Nashville, TN 37203 ABC members are building Music City, and its the perfect backdrop for ABC Convention 2020. Nashville, a top convention destination known for its honky-tonks, food and arts scene, is also a great place to get inspired by keynote speakers, network with ABC peers and celebrate the accomplishments of merit shop contractors from across the country. Registration for ABC Convention 2020 is open to ABC members, chapter staff and guests sponsored by a member or chapter. If you are a nonmember interested in attending, please email meetings@abc.org for more information. ABC Convention is a closed event. All attendees must be registered and display an event badge to access to any of the ABC Convention events. Advanced registration will close on Monday, August 10. ABC is offering an attractive registration fee that incentivizes attendees to take part in all elements of the August convention. The fee has been reduced to $475. No a-la-carte registration options are available, with the exception of the Excellence in Construction® Awards gala* and the National Craft Championships day pass. If you plan to attend the August Convention and have not yet reached out to us, please email meetings@abc.org to confirm your registration. For more information and to register for this event, please visit http://abcconvention.abc.org..or contact Associated Builders and Contractors, 440 1st St., N.W., Ste., 200, Washington, D.C. 20001. Phone: 202/595-1505 Email: gotquestions@abc.org. NATIONAL ASSOCIATION OF WOMEN IN CONSTRUCTION Groundbreaking Women in Construction Conference Dates: August 24 – 25, 2020 Place: Hilton San Francisco Union Square San Francisco, California Groundbreaking Women in Construction Conference is much more than just a conference. It is a catalyst for change to inspire women at all levels to develop their leadership skills, expand their influence and boost industry growth potential. GWIC enables attendees to share, learn, challenge and inspire each other to contribute to their workplace and employer and realize career success. GWIC is for women and men in all construction sectors – architecture, engineering, consulting, contracting, supplier-vendors and related businesses, and in all career fields and levels, to expand their understanding of workplace interactions, key industry issues, and better talent management. For more information on GWIC Conference, contact the National Association of Women in Construction, 327 S. Adams Street, Fort Worth, TX 76104. Phone: 817/877-5551

NATIONAL ASPHALT PAVEMENT ASSOCIATION (NAPA) NAPA Midyear Virtual Meeting Managing Disruption: The COVID-19 Era...and Beyond Dates: July 13 – July 15, 2020 In order to protect the health and safety of our members while continuing to provide valuable education and engagement opportunities, NAPA leadership decided to bring the in-person Midyear Meeting to a virtual platform. The theme of NAPA’s Midyear Virtual Meeting is managing disruption in the COVID-19 era and beyond. Attendees will walk away with a better understanding of how to position themselves to navigate the changing economic, legislative, and workforce landscapes. Attendees will learn from experts on the latest trends and best practices as it relates to the pandemic and how our industry may change as a result. For more information on the Midyear Virtual Meeting or to register, HISTORICAL CONSTRUCTION EQUIPMENT ASSOCIATION (HCEA) visit napamidyear2020.elevate.commpartners.com. 35th Annual International Convention and Old Equipment Exposition (POSTPONED UNTIL 2021) ASSOCIATED GENERAL CONTRACTORS (AGC) August 27 – 29, 2021 AGC Construction Safety, Health & Environmental VIRTUAL Dates: Instead of being held this August, it has been rescheduled for August Conference 2021, at the same location near Concordia, Kansas, with the same Dates: July 14 – July 16, 2020 AGC’s Construction Safety, Health & Environmental Conference is the outstanding attractions. industry’s foremost annual conference to hone in on the most critical Thank you for your patience and understanding. Be well, and see safety, health and environmental compliance and risk issues you at the 2021 Convention!

Events are subject to change, check websites for updates

Page 70 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Rosen, Buddy Barton Hold On-Site Auction in Cleveland

Jordan Adelman of Adelman’s Truck Parts and Sales, based in Canton, Ohio, was at the auction in search of trucks.

Anthony (L) and Joe Frato were pleased with the results of the auction.

osen & Company, with Buddy Barton of Buddy Barton Auctions, held a construction and industrial equipment auction in Cleveland, Ohio, on June 12. Conducted at Collinwood Iron and Metal Recycling and Salvage’s equipment yard and warehouse, the auction featured equipment ranging from dozers, excavators, skid steers and wheel loaders to trucks and a variety of recycling equipment as well other miscellaneous vehicles and equipment. The auction drew enthusiastic bidding from both onsite and online buyers resulting in an even 50/50 split of dollars spent between online and live bidders. Both equipment sellers and buyers were pleased with the prices realized at the auction. According to Rosen & Company President Sheila Rosen, one highlight of local interest at the sale was a 1932 Ford Model B flatbed truck, which sold for $22,000. The truck originally belonged to Richardson’s Market, located on the near west side of Cleveland. The seller was the vehicle’s second owner, who pridefully owned the truck for the past 30 years. The buyer also is a Mike Wierzbicki was on hand Cleveland market owner and has plans to display the at the auction looking for truck at one of his stores. equipment bargains. Established in 1917, Rosen & Company Inc. is one of Ohio’s longest-operating auction companies, providing auctioneering, appraising and liquidating services in the Midwest for four generations. Currently led by Sheila Rosen, Buddy Barton of Buddy Barton Auctions serves as lead auctioneer. For more information, visit rosenandcompany.com. 

(L-R): Tom Perko, Anthony Frato and Bob Tripodi of Collinwood Iron and Metal Recycling and Salvage look over this 1932 Ford Model B flatbed truck up for bid at the auction.

Bob Tinl of Valley City Excavating hoped to land the winning bid on a wheel loader at the auction.

CEG

Clayton Neal works the microphone for bidding on miscellaneous items inside the warehouse at Collinwood Iron and Metal Recycling and Salvage’s facility.

Andy Kiss of Andy’s Empire Construction and Demolition reviewed the machines up for bid in the equipment yard.

Rosen & Company’s Marvin and Sheila Rosen stayed busy making sure that the auction went off without a hitch.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 71

Page 72 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Steffes Group is now accepting consignments for its regionally-famous AgIron West Fargo Event, with live onsite bidding July 29.

Steffes Group’s Live Auctions Return With Farm Retirement, AgIron, More

he Steffes Group will return to live auctions when bidders gather in Horace, N.D., on July 8. The event will mark 117 days since the company’s most recent live auction. Meanwhile, the company has continued with scores of successful online auctions of machinery, land and other assets. “We’ve had amazing results with our online auctions, with great outcomes and satisfied customers. But some farmers have always looked forward to a live auction upon their retirement. And candidly, we’re auctioneers. Live bidding is in our DNA, and we’ll be excited to get back to it,” said Scott Steffes, president of the company. More live auctions will follow, including a major farm retirement auction on July 23 in Hallock, Minn. The company also is now accepting consignments for its regionally-famous AgIron West Fargo Event, with live onsite bidding July 29. Geith is going back to its Irish roots with a distribution “We’ve never slowed down, even model that supplies customers with its products faster than when we had to go about some things ever before. without live bidding, but we’re glad to “Our customers are always our main priority,” said Adrian be able to offer live bidding events that Kelly, sales manager of Geith. “In addition to supplying safe so many of our sellers and bidders alike and high performing attachments, we understand that downtime costs our clients money. To better serve the industry, we’ve created two distribution and fabrication facilities that can supply the best piece of equipment for the job quickly and efficiently.” Geith’s new distribution centers, located in Atlanta and Cooperstown, N.D., have the company poised for growth and success. The new locations allow for attachments to be customized and shipped quickly, resulting in less downtime for customers. “This is the way the company originally intended our distribution system to operate,” Kelly said. “We’re going back to the basics and what has made Geith the premier choice for excavator attachments for the last 60 years.” For more information on Geith, go to The Steffes Group will return to live auctions when https://www.geith.com/en.  bidders gather in Horace, N.D., on July 8.

Geith Ramps Up Its Distribution Model With Two Locations

enjoy,” said Steffes. “It also paves the way for us to follow through with plans for our 60th Anniversary, which we are celebrating this year. We expect to be announcing those plans in the very near future.” In the anniversary celebrations, he said the company will spotlight the Steffes “Brand Promise” that has guided the company’s operations through the decades. The Brand Promise is: • Strive every day to be the best • Embrace and drive change • Create fun, enjoyment and a sense of family in an openminded environment

Steffes Group provides services throughout the upper Midwest, including Iowa, North Dakota, South Dakota, Minnesota, Wisconsin, Montana, Illinois and Nebraska.

• Pursue learning and growth • Say what you do and do what you say • Assemble outstanding people who do outstanding things • Provide the right tools for the right job • Under promise and over deliver • Be passionate, determined and humble • Tell the truth, never lie, even if it's to your own detriment Steffes Group provides services throughout the upper Midwest, including Iowa, North Dakota, South Dakota, Minnesota, Wisconsin, Montana, Illinois and Nebraska. For more information, call 701/237-9173 or visit steffesgroup.com. 

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • June 27, 2020 • Page 73

CON S T RUC T ION E QUIP ME N T

150+ ITEM E S SELL

AUCTIION

NO RESERVE! Straight. Simple. Sold.® 86 6 . 60 8 .92 83

THURSDAY, JULY 9 2S

LIN

Bidding star ts to close at 10 a.m. CD

GW9179 ‘98 John Deere 310E backhoe

DG2603 ‘94 Mack RD dump truck

GW9177 Ditch Witch MX352 mini excavator

DG2191 ‘15 15 Mustang 350Z NXTC mini excavator

DD2555 ‘11 11 Bobcat T650 skid steer

DE5802 ‘07 07 John Deere CT322 skid steer

DG6795 ‘04 D 04 John Deere 7550C LGP dozer

DG2177 Volvo A35 hau ul truck

GW9170 ‘11 Vogele Vision 5200-22 paver 5200

DF3193 ‘00 Sterling LL-Line crane truck

DG2204 ‘09 Freightliner Bus. Class M2 rolloff cont. cont truck

HS9639 ‘09 Chevy C8500 digger derrick truck

GA9040 ‘11 Ford F550 G Super Duty bucket truck

GC C9188 ‘14 Ditch Witch RT445 trencher

LIN

GF9237 New Holland B95B B backhoe

INVENTORY INCLUDES: TRE ENCHERS: ‘14 Ditch Witch RT20, ‘06 Ditch Witch RT40 SKID STEE ERS: ‘14 Case SV250, ‘11 CAT 259B B, Terex TSV60, CAT 236B SCISSO OR LIFT: ‘08 Genie GS-193 EXCAV VA ATOR: ‘81 Link Belt LS S-5800 Scrap Master CRANE TRU UCK: ‘06 Int’l 4200 SERVICE TRUC CK W/CRANE: ‘05 Freightliner Bussiness Class M2 READY MIX TRUC CK: ‘05 Int’l 7400 DOUBLE DRUM VIBRAT ATORY ROLLER:: Stone DDR3100 HAUL TRUCK: Volvo A35 and more. All items are sold “A “AS IS.” 10% buyers premium m applies. Aaron McKee TX T X Li Licensse #16401.

purppleewavee.com ccom BID NOW! N ! pu

Page 74 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

ADVERTISER INDEX To read articles about these CEG advertisers, visit www.constructionequipmentguide.com ALEX LYON & SON INC

KLEEMANN ..............................................................................................34

SASKATCHEWAN CANADA ..........................................................69

KOBELCO CONSTRUCTION MACHINERY ......................................44,45

ALEX PARIS CONTRACTING CO INC ......................................................9

KOMATSU AMERICA CORP ..............................................................52,53

ALLIED CONSTRUCTION PRODUCTS ..................................................35

KPI-JCI ......................................................................................................38

AMERICAN STATE EQUIPMENT ..............................................................7

KUBOTA EXCAVATOR..............................................................................24

AMULET ..............................................................................................48,51

MAGELLAN CONSTRUCTION ................................................................41

ASCENDUM MACHINERY INC ................................................................11

MANITOWOC CRANE GROUP................................................................43

BANDIT INDUSTRIES INC ..................................................................30,31

MCCANN INDUSTRIES INC ......................................................................6

BANE-WELKER ..........................................................................................6

METSO MINERAL CRUSHING ................................................................33

BARGAINS................................................................................................65

METSO MINERALS SCREENING............................................................39

BOBCAT ENTERPRISES ........................................................................16

MID COUNTRY MACHINERY ..................................................................25

BROOKS TRACTOR ................................................................................21

MUSTANG MFG........................................................................................20

CEG SCALE MODELS ............................................................................26 CONSTRUCTION EQUIPMENT GUIDE ..................................50,64,66,71 CSTK JCB ................................................................................................27 CUSTOM MADE PRODUCTS ..................................................................16 DON SMOCK AUCTION CO ....................................................................68 DOOSAN PORTABLE POWER ................................................................42 DURA TECH INDUSTRIES ......................................................................36 ERB EQUIPMENT COMPANY..................................................................13 ESCO CORP ............................................................................................49 FABICK CAT................................................................................................2 FAE USA INC ............................................................................................29 FARM-RITE EQUIPMENT INC ..................................................................8 FELLING TRAILERS............................................................................62,63 FINKBINER EQUIPMENT CO ....................................................................7 FLANGE LOCK ........................................................................................20 FOLEY EQUIPMENT CO..........................................................................19

NATIONAL ATTACHMENTS ....................................................................48 NORAM ................................................................................................56,57 POWERSCREEN MW DEALER GROUP ................................................37 PURPLE WAVE INC CONSTRUCTION EQUIPMENT AUCTION ....................................73 RACKERS EQUIPMENT CO ....................................................................35 ROAD BUILDERS MACHINERY ..............................................................15 ROCK TOUGH QUALITY SCREENING ..................................................36 ROCKWATER CONSTRUCTION EQUIPMENT ......................................51 ROLAND MACHINERY INC........................................................................5 SANY AMERICA INC ................................................................................56 SCHAEFER ENTERPRISES ....................................................................51 SENNEBOGEN ........................................................................................32 SMITHCO..................................................................................................61 STAR EQUIPMENT LTD ............................................................................6

GARY CARLSON EQUIPMENT ..............................................................12

TEREX FUCHS ........................................................................................40

HITACHI CONSTRUCTION MACHINERY ..............................................55

THE VICTOR L PHILLIPS CO ..................................................................27

HOWELL TRACTOR & EQUIPMENT CO ................................................76

TOWMASTER INC. ..................................................................................59

ILLINOIS TRUCK & EQUIPMENT ..............................................................3 IRAY AUCTIONS INC

OHIO STATE SUPPLEMENT

ONLINE AUCTION ..........................................................................72

COLUMBUS EQUIPMENT CO ..................................................................8

JEFF BELZER ..........................................................................................60

EQUIPMENT CORP OF AMERICA ............................................................3

JJ SCHECKEL CORP ..............................................................................23

GORILLA HAMMERS ................................................................................1

JOHN DEERE ..........................................................................................75

JCB OF OHIO ............................................................................................5

KIRBY-SMITH MACHINERY INC..............................................................17

THE MCLEAN CO ......................................................................................7

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

CONSTRUCTION EQUIPMENT GUIDE â€¢ www.constructionequipmentguide.com â€¢ June 27, 2020 â€¢ Page 75

GOT A LOT ON YOUR PLATE? DIG IN. Loaded with our rugged EPA Final Tier 4 (FTT4)/EU Stage IV PowerTechâ„¢ diesel engines, the 250G LC and 300 0G LC Excavators will fast-trrack your bottom line. Meetting stringent standards, THESE MACHINES DELIVER D THE BEST COMBINATION OF PERFORMANCE EFÎ‚CIENCCY AND RELIABILITY WITHOUT SACRIÎ‚CING POWERR OR TORQUE 0PTIMIZED HYDRAULICS YIELD MORE MUSCLE SO O YOU CAN GET IN GET DONE and get g on to thee next jjob. And if youâ€™re y hunngry g y for even more product p tivity, y add anyy of the manyy available options and pile even more on your plate.

mccoycf.com Ashland, WI 715/682-5522 Chippewa Falls, WI 715/834-2924 Merrill, WI 715/536-0633 Duluth, MN 218/722-7456 Bemidji, MN 218/759-1996 Grand Rapids, MN 218/326-9427 Escanaba, MI 906/789-9054

www.erbequipment.com Fenton, MO 636/349-0200 Foristell, MO 636/463-2500 Cape Girardeau, MO 573/334-0563 Cuba, MO 573/885-0500 Owensboro, KY 270/684-2339 Paducah, KY 270/554-1131 Mount Vernon, IL 618/244-6800 Evansville, IN 812/473-0484

www.meadetractor.com Bowling Green, KY 270/842-3400 London, KY 606/862-8447 Louisville, KY 502/253-3721 Richmond, KY 859/623-2030 Chattanooga, TN 423/855-0633 Kingsport, TN 423/349-5001 Knoxville, TN 865/546-3207 La Vergne, TN (Nashville) 615/501-8600

www.aisequip.com Bridgeport, MI 989/777-0090 Grand Rapids, MI 616/538-2400 Lenox, MI 586/727-7502 New Hudson, MI 248/437-8121 Williamsburg, MI 231/267-5060

www.brookstractor.com Madison (Sun Prairie), WI 608/837-5141 Milwaukee, WI 414/462-9790 Green Bay (De Pere), WI 920/336-5711 La Crosse (West Salem), WI 608/786-2644 Stevens Point (Plover), WI 715/254-2777 Racine (Mt. Pleasant), WI 262/898-6700

www.westsidetractorsales.com Naperville, IL 630/355-7150 Rockdale, IL 815/730-9011 Rockford, IL 815/961-3160 South Holland, IL 708/331-6362 Wauconda, IL 847/526-7700 Bloomington, IN 812/333-9677

Fort Wayne, IN 260/482-8576 Indianapolis, IN 317/544-3411 Lafayette, IN 765/447-6933 South Bend, IN 574/232-1461 Terre Haute, IN 812/645-7160

Page 76 • June 27, 2020 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

THE FUTURE F TURE OF TRE EE CARE CARE Custom-engineerred tree care handler

GARY Y,, IN

800.852.8816

PE ERU, IL

81 15.224.3003

www.h w.howell welltractorr..com

24/7 parts and service