Rocky Mountain Edition A2Z Metalworker Magazine April 2013

Vol. 6, No. 2 March/Apr 2013

Rocky Mountain Edition (CO, UT, ID, MT and WY)

A2Zmetalworker.com

Quick Turn Makes Precision Parts Quickly and Accurately with the Help of Mazak Machines

Editors Corner

Cover

“In the spring, at the end of the day, you should smell like dirt.”

Margaret Atwood

For many, the onset of spring translates to the end of restlessness. We are so ready for the transition. We’ve had enough winter, in many areas of the country (and of course in the Rocky Mountain states), snow’s been on the ground for months, and we are longing for the green to start peaking through.

And then one day it finally does! It’s so liberating and touching, hopefulness in the bitter wind of the end of winter. It’s a time to plant gardens and to enjoy the beautiful results of our toil.

Spring Cleaning. In Greece, and other Orthodox nations, it is traditional to clean the house thoroughly either right before or during the first week of Great Lent, which is referred to as Clean Week. This also often corresponds with the Julian New Year, or April 1. Even if we’re not Greek, or Orthodox, really no matter what our religious affiliation is, it’s time to plant our gardens and clean our house.

Springtime is also a good time to ‘clean house’ in our businesses. It’s a time to review goals and objectives, and to do some strategic planning. Are you investing into your business and/or organization to ensure its continued success? Are you looking to new customers, new industries to perpetuate your entity? Are you certifying to the standards your customers are looking for in their suppliers? Are you getting rid of clutter that you don’t need?

Go out and plant your spring gardens. Enjoy the fresh smell of dirt. And plant new seeds for your business and for your life. It feels good, and you’ll find that people all around you are happier, lighter in spirit, after the long, cold winter! It’s such a good time to get out and visit with your customers, new and old. Take time to smell the flowers.

We’ll be attending a number of trade shows for the precision manufacturing industry in the upcoming months, from Denver, to Seattle, to Portland, to Salt Lake City, to Southern California. We hope to see many of our readers and advertisers at these industry events. Please take the time to learn about what our advertisers in this publication can do for your business. Perhaps they can help you to plant the seeds to invigorate and expand your business.

Go ahead, don’t be afraid to smell like dirt. Enjoy springtime. For many, it is the most wonderful season of the year! It is for me. Until next issue, I wish you success and happiness, and God Bless our Troops!

Linda Daly Publisher

Quick Turn Precision Makes Precision Parts Quickly and Accurately with the Help of Mazak Machines.

This Month’s Shop Profile.

Announcements/Releases............6,8,10,12,14 Feature.Articles..............................24-25,28-30 Buyers.Guide.Equipment........................49-54 Buyers.Guide.Processes...........................55-61 Card.Gallery..............................................49-61 Index.Of.Advertisers.....................................62 Editorial....................................... Throughout

Published.by: A2Z.Metalworker PUBLISHER/EDITOR Linda Daly linda@azmetalworker.com Mail Address: PO Box 93295 Phoenix, AZ 85070 Telephone: (602) 412-7696 Website: www.azmetalworker.com E-mail: info@azmetalworker.com

CONTRIBUTORS Kim Carpenter Gene Wirth Chris Seay Published bi-monthly to keep precision manufacturers abreast of news and to supply a viable vendor source for the industry.

Circulation: The A2Z Metalworker has compiled and maintains a master list of approximately 6500 people actively engaged in the Precision Manufacturing Industry. It has an estimated pass on readership of more than 18,000 people.

Advertising Rates, deadlines and mechanical requirements furnished upon request or you can go to www.azmetalworker.com.

All photos and copy become the property of A2Z Metalworker.

The Publisher assumes no responsibility for the contents of any advertisement, and all representations are those of the advertiser and not that of the publisher.

The Publisher is not liable to any advertiser for any misprints or errors not the fault of the publisher, and in such event, the limit of the publisher's liability shall only be the amount of the publishers charge for such advertising.

A2Z METALWORKER

•

4•

March/Apr 2013

Miter cutting has never been so affordable Trajan saws are designed by people who know the metal cutting industry. These utility Trajan horizontal band saws are quality machine tools that will provide fast, precise cutting. All of our band saws use a strong gear box, hydraulic down feed control, a wire chip brush, and a standard coolant pump system.

Trajan 1319 13" x 19" Two-Way Swivel, Professional Heavy Duty Band Saw • New type one-piece stand incorporated with swivel control box for very convenient operation • Professional semi-auto hydraulic system can make a perfect cutting cycle by lifting the saw head to correct height and cutting down

only

• Laser cut light and hydraulic tension meter included

$9,250

Trajan 250S Manual, Swivel Head, Variable Speed Band Saw • Cast iron base and blade wheels coupled with heavy gauge steel saw head perform excellent while maintaining low cost • Control panel conveniently installed on top of saw • Carbide guide enhances cutting stability and extends blade life

only

$5,400

• 0° Cutting Capacity: 9 13/16” Round, 9 13/16” x 15 1/8” Rectangle, 9 1/16” x 15 3/4” Rectange • 45° Cutting Capacity: 8 7/16” Round, 9 13/16” x 8 7/16” Rectangle

Trajan 712N 7” Metal Cutting Band Saw • Utility saw, better value, immediate delivery, always in stock • Casting structure assures mechanical strength • Adjustable blade guide for high accuracy and long blade life

only

$1,200

www.trajansaw.com

877-499-7297 A2Z METALWORKER

•5 •

March/Apr2013

Announcements & Releases Rocky.Mountain.Tooling.and.Machining.Association. (RMTMA). Invites. you. to. a.Workforce.Development.Round.Table.Discussion The average age of machinists in the U.S. is over 50 years old!

Does your business need young, skilled workers?

Why are they so hard to find?

RMTMA has assembled a diverse panel of leaders in the manufacturing training sector.We will provide an opportunity for our members and guests to meet face to face with the people who are leading the charge to educate tomorrow’s skilled manufacturing workforce.

When: Thursday, April 11th from 4:30-7:00pm Cocktail reception and networking from 4:30-5:30/Panel Discussion from 5:30-7:00 Where: Wellshire Inn – Cambridge Room – 3333 S. Colorado Blvd, Denver, CO 80222 How: Register now to attend by calling (720) 248-8777 or email maureen@rmtma.org Cost: $30 per person Panel Members • NTMA – U: Ken McCreight – innovative new program for online education and training.

• NTMA California Training Center: Michael Kerwin – 40 years of machinist training in one of our country’s most successful programs.

• Bollman Technical Education Center: Leslie Trexler - provides career and technical education programs for Adams 12 school district.

• BEST Robotic Program: Kathy Geise – inspires students to pursue careers in engineering, science and technology through participation in robotics competitions.

• Representative from CACI (Colorado Association of Commerce and Industry)

Sandvik.Coromant.Introduces.a.New.Multiedge. Rough. Face. Milling.

Cutter Sandvik Coromant introduces CoroMill 357, a new tough multi-edge face milling cutter for roughing and cubing in steel and cast iron with high insert security.

In typical applications, such as rough face milling, cubing, intermittent component figurations, components with uneven stock or forgings, welding and castings, applying CoroMill 357 achieves a high metal removal rate and superior productivity.

The CoroMill 357 multi-edge design presents a cost efficient solution because the double sided, thick pentagonal inserts housed in A2Z METALWORKER

•

6 • March/ Apr 2013

shim-protected tip seats provides superior production economy and reliable performance.

The mill’s secure, strong cutter body features an innovative insert clamping system that offers quick and easy insert indexing to save time. Large support-faces radially, axially and on the base prevent deformation and ensure consistent performance.

For more information on the new CoroMill 357, visit http://www. sandvik.coromant.com/productnews.

Hexatron.Engineering.Company.Celebrates.

31.Years.In.Business Hexatron Engineering Company is celebrating its 31st year in business.This engineering, design, and manufacturing company was founded by Cy Williams, a degreed mechanical engineer. He has built his company and reputation on its expert design capabilities.

The U.S. Air Force has contracted with Hexatron Engineering many times to reverse engineer parts and manufacture spares at a much more economical cost then previously possible.

For the 25 years, Hexatron Engineering has been a licensee of Boeing Aircraft Company and has been manufacturing the aircrew seats used on the DC 9 and DC 10 Cabin Attendant and Crew Seats.

Designing and building prototype machinery such as labor-saving automation and unique handling equipment is another aspect of Hexatron’s capabilities.

Cy says that if you use aluminum molds you should explore the possibility of HEXALITE, a proprietary treatment that could save you in both material and labor costs. This treatment makes it so nothing sticks to the surface of the aluminum part(s).

The company diversified by expanding into the field of Sport-Aviation engines and they are currently producing the HEXADYNE AVIATION P60.This is an air-cooled sport plane engine that is incredibly efficient, lightweight and powerful.

For more information on this superior engineering, design and manufacturing company, contact them at 801-363-8010 or visit their website at www.hexatronengineering.com.

Haas.Introduces.High-Speed.HRC210.Roller.

Cam.Rotary.Table Adding a 4th-axis rotary table to a machining center is a proven way to boost productivity, reduce setups, and increase accuracy on multi-op Announcements Continued Page 8

VE RTICAL MACHIN IN G CENTERS

G CEN T ERS

WE HAVE WHAT IT TAKES

HAT IT TAKES

Looking for speed…power…precision…quick setups…conversational programming, all in a rugged, budget-beating VMC? Whatever you need, look for Doosan’s Mynx or DNM to have it.

Mynx – models 5400, 6500 or 7500

For partsor upversatility, to 60 x 30 x 24.6 inches s speed,•power count on Doosan to have it.

• Spindle motors from 20 to 40 HP and speeds to 12,000 rpm • tals, verticals, Traverse verticals Rate 1,181 and ipm mill-turns • Rapidinverted

ferent PumaCAT turning 40 andcenters 50 with Big Plus Dual Contact Spindle

s up to 43.3” x 198” DNM diam.

– models 400,long 500, 650 or 750 40” • For parts up to 85 x 30 x 25.6 inches

Spindle motors to 75 Hp•and 6,000 rpmfrom 15 to 30 HP and speeds to 15,000 rpm

• controls, meehanite castings, 45o slant beds, uding Fanuc Traverse Rate 1,889 ipm • Rapid torque tube construction, glass scales, y-axis motion, spindles, and live tooling CAT 40 taper with Big Plus Dual Contact Spindle

with more than 30 years’ experience building tough machines for the toughest jobs.

CTIVITY

And they’re from Doosan, with more than 30 years’ experience building tough machines for the toughest jobs. www.doosaninfracore.com/machinetools Corporate Office & Engineering Center: 19A Chapin Road Pine Brook, NJ 07058 Tel: 973-618-2500

www.doosaninfracore.com/machinetools Foothills Machinery Sales

Midwestern Technical Center: 1701 F Howard Street Elk Grove Village, IL 60007 Tel: 847-437-1010

VALUE

Corporate Office & Engineering Center: 19A Chapin Road 116th Ave, Broomfield, CO 80020 Pine Brook, NJ 07058 Tel: 973-618-2500

6855 West Western Technical Center: 488 W. Meats Avenue Orange, CA 92865 Tel: 714-974-1330

303.466.3777

Midwestern Technical Center: 1701 F Howard Street www.foothillsmachinery.com Elk Grove Village, IL 60007 Tel: 847-437-1010

TECHNOLOGY

PRODUCTIVITY

VALUE

Western Technical Center: 488 W. Meats Avenue Orange, CA 92865 Tel: 714-974-1330 A2Z METALWORKER

•7 •

March/Apr2013

Fadal Problems?

Down Today - Up Tomorrow

Find Us On Facebook & Twitter!

MOTORS SPINDLES

RESOLVERS

sales@fadalcnc.com • 208-855-9426 1582 E. Bramble Ln • Meridian ID 83642 WWW.FADALCNC.COM

BALLSCREWS

Announcements Continued

parts. Adding a fast rotary table to a fast machine creates a high-speed package that slashes cycles times even further.

The HRC210 from Haas Automation is a high-speed, camdriven rotary table that provides cutting and indexing speeds up to 830°/second. It provides 110 ft-lb (149 Nm) of spindle torque for synchronous 4-axis machining, and has a pneumatic brake that yields 134 ft-lb (182 Nm) of holding torque for stationary work. Indexing accuracy is ±20 arc-sec, with repeatability of 4 arc-sec.The 8.27” (210 mm) platter of the HRC210 has a center height of 6.000” (152.40 mm), with a 2.00” x 1.91” deep (50.8 mm x 48.5 mm dp) pilot bore and 1.77” (45 mm) through hole. Six radial T-slots simplify fixture and workpiece mounting, and both manual and pneumatic tailstocks are available for additional workpiece support.

The HRC210 is driven by a high-performance roller cam system that uses a high-torque servomotor to drive a globoidal cam meshing with cam followers equally spaced around the diameter of a roller gear.

Needle bearings in the cam followers provide smooth contact with the cam, and a precision-engineered cam profile ensures accurate speeds and motion. Because the roller drive is preloaded during assembly, the system yields high stiffness, high torque, and high speeds, while providing low wear characteristics and reducing maintenance.

A2Z METALWORKER

•

8•

March/Apr 2013

If you’re searching for a high-speed rotary solution to reduce cycle times and increase accuracy, the Haas HRC210 is the answer.

Like all Haas products, the HRC210 is backed by the worldwide network of Haas Factory Outlets – the most extensive system of support and service in the industry. Note: Requires a Haas mill with software version 18.13 or later. Includes the necessary 4th-axis drive and wiring. Not available for stand-alone operation.

Ganesh.Machinery.Will.Introduce.A.Fully.

Automatic.Robotic.Machine.Tending.System In keeping with the PMTS show theme of “Machining Technology,” Ganesh will show you how to meet tomorrow’s needs today by unveiling the new multitasking machines with robotic machine tending system on the main PMTS -2013 show floor Booth# 263.

Ganesh Cyclone Series with fully robotic system new machine models are well-suited for those who are thinking about how to remain competitive by both getting the job done in one handling and having ample tooling flexibility to have multiple jobs setup on the machines at one time.

Cyclone-32 GT: A dedicated pneumatic part loading system will demonstrate high speed, small part loading capability on the Ganesh Cyclone-32GT 3-axis precision heavy duty gang tool lathe.

The load system provides a low cost solution for small component Announcements Continued Page 10

WHICHEVER SWISS ST 26 YOU CHOOSE:

MEDICAL ADVANCED STARTER

YOU ALWAYS CHOOSE SWISS MADE QUALITY Tornos Swiss ST 26 for turned parts up to 26 mm. Amazingly affordable Swiss Made quality.

Now it pays to invest in high performance and productivity with the new Swiss ST 26. Two totally independent tool systems provide balanced operations, 7 linear axes, 2 C-axes and conversion to a guide-bush-less machine in only 30 minutes. The Swiss ST 26 is equipped with the most powerful and dynamic spindle and counter spindle ever built for this class of machine, allowing extreme machining capabilities. Choose from three turnkey equipment packs: “Starter”, “Advanced” and “Medical”.

Tornos Technologies US Corporation: Lombard, IL and Bethel, CT; www.tornos.us

AUTOMOTIVE - MEDICAL - ELECTRON I CMETALWORKER S - M I C R O•M9E •C H A N I C2013 S A2Z March/Apr

Shop Tools, Inc., Colorado’s Largest Independent Distributor, Is Celebrating Over 30 Years In Business!

We Are The ‘PRO’ in Productivity!

Makino. Introduces.

N2. and. N2-5XA. CNC. Horizontal.Machining.

Centers.for.Productivity. in. Medical. Manufacturing Makino introduces its latest CNC horizontal machining centers, the N2 and N2-5XA, for medical and small aluminum parts manufacturing. The new N2 platform is a high-productivity solution contained in a small package that consumes less than 26 square feet of floor space (includes coolant tank and standard chip management). Its 5-axis N2-5XA configuration pushes this productivity even further with five-sided part accessibility and opportunities to consolidate operations.

“Floor space is often at a premium in medical manufacturing facilities,” said David Ward, horizontal 8160 Blakeland Dr, Unit G 1110 Elkton Unit A product manager at Makino. “A Littleton, CO 80125 Colorado Springs, CO 80907 traditional 400mm horizontal Ph. 303-375-9190 Ph. 719-593-0237 machining center can require upFax: 303-375-9198 Fax: 719-593-8907 www.shoptools.com www.shoptools.com wards of 125 square feet of floor space, which is a lot to dedicate to the production of parts that Announcements Continued can fit in the palm of your hand.

The N2 platform delivers a “rightmanufacturers. sized” machining solution built for speed, providing a high-speed spindle, rapid positioning and quick acceleration and deceleration.

CYCLONE 52-TTMY:The Ganesh standard robotic machine tending With the N2-5XA, manufacturers can eliminate setups and achieve system will be integrated to a Ganesh Cyclone-52 TTMY.The robotic finer surface qualities, making it an ideal solution for many serving system is a fully automatic, compact solution that utilizes a Yaskawa the medical market.”

Motoman robot, and a flexible part infeed / outfeed system that can be easily configured to accommodate a wide variety of parts and be installed in the matter of hours.

The N2 and N2-5XA are equipped with a 20,000-rpm HSK-40 spindle that accelerates to full rpm in just 0.8 seconds. Four spindle CYCLONE 32-CS: The 7-axis machine with 27-tools and 11-live nozzles provide coolant directly to the cutting zone for efficient tools will also be cutting demos showing the unique capabilities that cooling and improved part quality. Both machines feature simple, it has to offer for 1.375” (36mm) bar diameter sliding headstock efficient chip and coolant flow out of the work zone. The standard CNC lathe without a guide bushing. A 10-HP Mitsubishi spindle coolant tank with chip pan provides effective chip removal for near motor drives the powerful 6,000-RPM spindle. Both the main and net shape machining. A rear lift up chip conveyor with filtration is sub spindle use 32mm Traub A-32 collets for easy part transfer and an available option for higher chip volume applications. complete “done-in-one” machining efficiency, including all radial, end-working, and Y-axis live tooling work on both the front and Direct-drive rotary axes of the N2 and N2-5XA offer an impressive backside of the part. peak B-axis speed of 150 rpm and a 90-degree rotation time of just 0.65 seconds. These systems work in concert with a responsive 1.4G See machines under power, live demo at PMTS 2013 booth # 263 & Z-axis to reduce common drill and tap operations by as much as 40 ask our application department how you can improve your process. percent compared to traditional 400-mm horizontal machining centers.

For more info please visit http://www.ganeshmachinery.com or Announcements Continued Page 12 call 1-888-542-6374.

A2Z METALWORKER

•

10 •

March/Apr 2013

When it comes to metal finishing, we’ve got you covered.

• Abrasive Equipment • Blasting Equipment • Mass Finishing Equipment • Cleaning and Environmental Equipment • Supplies • Technical Information

VIBRATORY

WATER TREATMENT

BLASTING

COMPRESSORS

We know metal working inside and out. Since 1996 we have been more than a distributor of metal working equipment and supplies. We’re your single source for custom solutions to all your metal working needs: equipment, supplies and inventory supply control.

Call us at 800.747.2637 • monthly specials • solutions-driven services • equipment or supplies • no-nonsense pricing Visit our website to request a quote www.metalfinishingsystems.com

4575 S. Navajo • Englewood, Colorado 80110 We’ve got you covered. sales@metalfinishingsystems.com Call us! We can help... 4575 South Navajo Street Logon to metalfinishingsystems.com800-321-3195Englewood, CO 80110 A2Z METALWORKER

• 11 •

March/Apr2013

SCRAP PICK-UP SPECIALISTS

Call us first for FREE containers

We set containers for: • Machine, welding & fab shops • Manufacturing facilities • Demolition projects • One-time clean-ups • Containers: 1 to 60 yards • Flatbed, cargo trailers, rolloffs • Small boxes on wheels • Locking Lids • Leakproof boxes

Top prices paid for: • Aluminum • Copper • Brass • Stainless • Steel/Iron • Alloys • Lead & more

Convenient drive-in recycling: • Easy acces from I-25, I-70 and Commerce City ~ • Fully paved • Se Habla Espanol

5555 Franklin St. Denver, CO 80216 www.ironandmetals.com

Call now for up-to-the minute price quotes and market info!

Iron & Metals, Inc.

303•292•5555 1•800•776•7910

Recycling Metals, Conserving Resources, Since 1961 Announcements Continued Both machines feature a stacked axis design, placing all linear motion on the spindle side of the machine and limiting workpiece movement to rotary table motion. This configuration creates an automation-friendly design with options for auto-loading doors, advanced robot interface, Erowa chuck interface and tool monitoring options to support unattended operation.

The N2 platform is powered by Makino’s Professional-F control running on a reliable Fanuc platform. Key control features on the 5-axis N2-5XA include tilted work plane and AI Contour Control (AICC). AICC reduces cycle times in complex 3-D program, while delivering the high levels of accuracy and surface finish expected in medical machining applications.

OMAX®.Corporation.Maintains.Commitment.to.Educating.

Future.Manufacturers OMAX Corporation, the global leader in the design and manufacture of advanced abrasive waterjet technology, recently announced its continued support of Aviation High School’s First® Robotics team, SkunkworksRobotics.The partnership marks the company’s sixth year of mentoring talented students interested in obtaining engineering and manufacturing skills.

One of OMAX’s educational outreach initiatives has been to provide youth with access to the manufacturing industry. During a six-week build season, the company’s engineers work closely with students and teachers from Aviation High School in the production of advanced robot components. The team designs, fabricates and tests all A2Z METALWORKER

•

12 • March/Apr 2013

its robotic components using OMAX’s advanced abrasive waterjet technology.

“Manufacturing is a viable and growing industry that makes for a lucrative career path, yet shops everywhere find it increasingly difficult to acquire skilled workers,” said Dr. John Cheung, CEO of OMAX Corporation.

“One reason for this gap is people’s misconception that manufacturing facilities are dark, dirty and low-tech places. But, nothing could be further from the truth. Today’s manufacturing environments are clean, safe and extremely high-tech.

OMAX takes pride in working with and encouraging students of all ages to become the next generation of manufacturing and technology leaders.”

In addition to the company’s work with Aviation High School, OMAX also works alongside several colleges including Kettering University, Renton Technical College, Washington State University and the University of Washington, to develop internship programs where engineering and technical students can gain highly beneficial on-the-job training prior to graduation.

Announcements Continued Page 14

Samuel Aerospace is one of North America’s top ten processors and distributors of metals, operating more than 40 facilities which are strategically located throughout Canada and the United States.

Additional facilities maintained in the United Kingdom, Australia, Mexico and China extend our reach globally. Our strategically placed processing and service centers allow us to offer on time and JIT delivery services.

Samuel Aerospace alloys are available in a complete range of shapes and sizes to meet the diverse requirements of the commercial and defense aerospace markets. We stock one of the most extensive aluminum inventories in the industry.

Our available aerospace aluminum offering includes:

• Sheet & Coil • Plate • Rod & Bar • Tube & Pipe

A variety of AS, ISO and TS standards ensures conformance to customer’s requirements. Primary aerospace service centers are ISO 9000 and AS9100/9120 certified.

Samuel Aerospace offers value-added quality processing services including:

• Water-Jet Cutting

• Bar and Extrusion Sawing

• Aluminum Plate Sawing • First Stage Processing

Our pre-production processing services are all performed to stringent quality standards to your specifications, saving you time and money while ensuring the quality of your end product. We go to great heights to deliver the right product to the correct quality standards, on time, every time. Plus, we offer Stock and Release and Vendor Managed Inventory programs.

These programs can help your company eliminate costly inventories and improve cash flow.

To learn more contact your Samuel Aerospace Metals representative or call (877) 565-7050.

Everything you need in a metals supplier…quality, reliability and availability.

All World Machinery Announces

Sales. Service. Solutions.

Huge Surplus Sale Millions of Dollars of Factory Original Parts Sample Products…

Waycovers Spindles Stators Spindle motors Bearings Seals

PARTS IN ED STOCK Tx and Irving, rd, IL Harva

or email awmmoriparts@allworldmachinery.com

To learn more about Aviation High School’s Skunkworks Robotics visit, http://ahsrobotics.us/Home/index.html.

Mazak. Event.Targets.Aerospace,. Medical.

Manufacturing.Technology In support of the growing aerospace and medical industries, Mazak Corporation is hosting a Discover More With Mazak event at its Northeast Technology Center in Windsor Locks, Conn., May 14, 15 and 16 from 9 a.m. to 7 p.m. daily. The event will highlight some to the most advanced manufacturing systems available today paired with expert guidance and applications support for meeting the ever-expanding production needs of the area’s aerospace, medical and other manufacturing sectors.

At the event, productivity-improving Mazak machine tools will be showcased through real-world application machining demonstrations. These include aerospace hard-metal machining on a HORIZONTAL CENTER NEXUS 6800 HM (Hard Metal Package) and medical implant machining on a VERTICAL CENTER NEXUS COMPACT. Additionally, new Mazak machines debuted for the first time in the area at the event will be the VARIAXIS i-700,VARIAXIS i-800 and the VERTICAL CENTER UNIVERSAL 400.

Also, over the course of the three-day Discover More with Mazak event, several technology presentations and expert guests will provide attendees with valuable manufacturing insight.

•

14 •

March/Apr 2013

Door safety switches Linear guides Chain Coupling Compression springs Air cylinders Solenoid valves Much much more…

Huge Savings While Supplies Last!

Call 815-943-9111

Announcements Continued

A2Z METALWORKER

Switches Belts Oil chillers Ball screws Spindle sensing rings Pulse generators

Parts for drawbar Drawbar assemblies Axis protectors Wipers Piston pumps Motors Indexing motors Coolant pumps

On Wednesday, May 15, special keynote speaker Richard Aboulafia of the Teal Group, a company that supplies independent aerospace and defense industry market analysis, will share his vast knowledge of the aviation and aerospace industries and speak about the commercial airline industry. Aboulafia also writes publicly about the aviation field, with numerous articles published in Aviation Week, Aerospace America and the Wall Street Journal.

Together with its machine tool technology, Mazak will also present its 3-4-5 The Next Level of Productivity that allows shops to more precisely identify the right level of technology for their particular operations.The 3-4-5 solution is the industry’s most comprehensive grouping of manufacturing resources and one that encompasses Mazak’s 3 Levels of Control, 4 Levels of Automation and 5 Levels of Multi-Tasking.

Attendees will also have full access to the Northeast Technology Center’s regional industry expertise and application engineering resources. Engineers and technicians will be on hand at the machining demonstrations to answer questions and discuss all aspects of the manufacturing process, including cutting tools, workholding, automation, material handling, quality assurance, chip handling, coolant, safety and software.

Discover More With Mazak—Northeast event registration information will be posted on www.mazakusa.com. Student Day for the event is scheduled for Friday, May 17, and Mazak expects over 100 local area students will attend.

We Know Long Products Improved turnaround on your production cutting orders for bar, tubing or structural shapes. Ryerson high-speed, precision carbide saws deliver close tolerance semi-finished parts in high volumes.

Choose rounds, squares, hexes, tubing, angles, channels or tees. Our inventories include a wide range of grades in carbon, alloy, stainless steel, aluminum, nickel or copper alloys.

Markets Served: • Energy • Mining • Aerospace

• Industrial • OEMs

Grades Stocked: Bar - 4130 / 4140-L80 / 4140-P110 / 4340 / 8620 / 1144 / 1018 / 1045 / 304L / 316L / 17-4 / 6061 / 6063 / 7075 Tube – 4130 / 4140-L80 / 4140-P110 / 4340 / 1026 / Sq Seamless / Rec Seamless / 304L / 316L / 6061 / 6063

Processed To Fit Your Needs: High Speed In House Cutting To Tight Tolerances +/- .020” on Carbon, Alloy and Stainless +/- .063 on Aluminum

We Know Plate Products Ryerson’s full line of metal products, in combination with our wide variety of processing capabilities, can simplify your manufacturing and procurement.

Whether you need a one-of-a-kind component or parts in production quantities, we offer the advantage of one stop shopping to reduce your overall costs and streamline your operations.

Markets Served: • Energy / Oil and Gas • Mining • Aerospace

Grades Stocked: Carbon & Alloy – A36, 516G70, 514, 572G50, AR400 Stainless – All Grades Aluminum – 1100, 6061, 7075, 2024, 7050, CAST TOOL

Processed To Fit Your Needs: • • • • • • • •

Oxy Fuel Cutting – Up to 12” Thick Steel High Definition Plasma Cutting – Up to 3” Thick Carbon and Stainless STD. Plasma Cut Up To 61⁄4” Stainless/Aluminum (Edgestart) Water Jet Cutting Precision Saw Cutting – Up to .005” Cut Tolerance Shearing • Beveling up to 3” Heat Treating • Temper Passing Stress Relieving

www.ryerson.com 6600 Hwy 85, Commerce City, Colorado 80022 303-287-0101 Local | 303-289-7919 Fax 800-332-1857 In State | 800-525-1811 Out Of State

514 W Pickett Circle Suite A, Salt Lake City, Utah 84115 801-820-1180 Phone | 801-820-1181 Fax 866-922-0748 Toll Free

Serving Colorado, New Mexico, Wyoming, South Dakota, Nebraska and Montana

Serving Wyoming, Idaho, Nevada and Utah

of thin-film solar annually, by the time they open for business in 2013. GE’s solar panels with be composed of the same thin layers of cadmium telluride currently used by their largest competitor First Solar, but for nearly less than a third of the cost.

GE has become one of the world’s primary manufacturers of wind turbines, and according to Victor Abate, Vice President of GE’s renewable energy business, the company will continue to actively invest in high-tech solar products to advance their position in the renewable energy industry.GE’s first step toward building their new factory has included the recent acquisition of PrimeStar Solar in Arvada, Colorado.

Abate relays, “The biggest challenge for solar is the cost of energy. For every point you can move [higher] in efficiency, you reduce the cost of the system by 10%.” To counter this issue PrimeStar Solar is seen as a major asset to GE. The company has been able to produce a CdTe thin-film panel with a record-breaking efficiency of 12.8%.

GE has stated that worldwide demand for solar products is expected to grow by 75 gigawatts over the next five years.

With these focused investments GE is hoping to capitalize on the growth.

Thus far they already have 100 megawatts worth of orders from utility-scale solar customers in the U.S.

More.Universities.Use.UAVs.For.Research Inside Higher Ed reported, “As Congress debates when and how the executive branch should be allowed to use drones for targeted killing in war zones, more universities here are seeking permission to use unmanned aerial vehicles.” Jack Langelaan, an associate professor of aerospace engineering at Pennsylvania State University, “wants to use them to replicate albatross flights.” Up until now, he has “been using simulation to mimic albatross flights. But the results aren’t as pure because some real-life factors can’t be modeled through simulation – either because it’s too difficult or because they are simply unknown.”

GE.Will.Build.the.United.States’.Largest.

Solar.Panel.Factory.

GE announced their plans to build the largest solar panel factory in the U.S. The company will spend 600 million dollars on the new factory and their goal is to produce of 400 megawatts A2Z METALWORKER

•

16 • March/ Apr 2013

M a n u f a c t u r e r s . A d d.

14,000.Jobs.In.February The Labor Department reported, “The nation’s unemployment rate dropped to a four-year low of 7.7 percent last month as job growth accelerated to 236,000.”

USA Today reported, “Professional and business services led job gains, with 73,000. Construction added 48,000 jobs and has added 151,000 since September on the housing-industry rebound. Health care added 39,000 jobs. Leisure and hospitality, meanwhile, added 24,000 and manufacturers added 14,000.”

Likely You Know That J.M. Grisley, 4th Generation Machine Tool Dealer, Has Been Serving Its Loyal Customers in The Intermountain West Region for 86Years.

But You Might Not Know What’s New at J.M. Grisley.

• 2 New Sales Engineers • A New Service Engineer Added To Their Team (Full In-House Service) • Now An Authorized Spaceclaim (3D Modeling Software) Reseller • You Can Now Purchase All Your Tooling And Fixturing From Them • Added CHMER/EDM Machines To Their Product Line: High End Quality EDM Machines at a Fraction of the Price. We also sell Consumables for All Major EDM Brands at Significant Savings

And Possibly You Didn’t Know These Important Facts About Their Premier Doosan Line*.

Turning Centers

Horizontal Machining Centers

Vertical Machining Centers

Horizontal Boring Mills

• Size: 3rd Largest Machine Tool Builder In The World • Doosan’s Are Everywhere! Including GE, Honeywell, Baldor, Ingersoll Rand, Caterpillar, FMC Corp, and Many Other Manufacturers Worldwide • R&D: 1700 Employees (330 R&D/Engineers) And An Annual R&D Budget Of $60 Million • Innovation: Introduced More Than 60 New Models In The Past 2 Years • Financial, Environmental & Social Responsibility: Made List of DJSI (Dow Jones Sustainable Management Index) for 2 Consecutive Years • North American Growth: Expanded U.S. Headquarters To 60,000 Sq. Ft. Building in Pine Brook, NJ, Complete with Engineering Center and 24x7 Support

1485 SOUTH 300 WEST SALT LAKE CITY, UTAH 84115

801.486.7519 A Z METALWORKER • 17 • March/Apr2013 www.jmgrisleymachine.com 2

DIFFERENT CANDY STORE ... SAME FEELING

8620 0 4 3 4 4140 ROUND BAR AND MORE

SSSSSSS TTS WSWW FSFF TTS WSWW

1-800-811-7466

TheWashington Post reports, “The dream of having a truly connected car may be getting closer. General Motors and AT&T announced that they will work together to put 4G WiFi connectivity into cars starting in 2014, opening up a new consumer electronics platform for app developers.”

USA Today reports that with the 4G system, Abram, GM’s chief infotainment officer “and Glenn Lurie, AT&T’s president of emerging enterprises and partnerships, can envision a car with the ability to contact owners on their smartphones to inform them remotely of a parking-lot accident - and then display a video recording of the collision. Or drivers could receive more early warnings about a vehicle’s mechanical trouble based on sensor readings from a car’s computers.

The 4G system will be available starting next year on most model year 2015 Chevrolet, Buick, GMC and Cadillac cars and trucks.”

Robotic.Bat.Wing.Could.Lead.To.FlappingWing.Applications Popular Science reports, “A new 3-D printed robotic bat wing can emulate the flapping motion of a real bat, helping biologists simulate how the mammals fly and helping aerodynamics researchers study new flapping-wing aircraft. In the process of building and modifying •

18 •

ALUM STNLS

COASTAL METALS

General.Motors,.AT&T.Team.Up.To.Make.4G. Vehicles

A2Z METALWORKER

1018

TG&P

March/Apr 2013

.co www

asta

tal lme

s.co

UP TO 26” DIAMETER

the robotic wing, researchers at Brown University stumbled upon some structural fixes that provide insight into how bat bodies evolved for flight.” The team led by Joseph Bahlman discovered by folding the wing like birds and bats do “in a bit on the upstroke,” there is an increase in “net lift by almost 50 percent--a useful insight into how flapping-wing flight works.”

ISM:. Manufacturing. Sector. Expanded. In. February USAToday reported, “The manufacturing sector expanded in February for a third consecutive month, according to the latest ISM manufacturing survey, out Friday. The Institute for Supply Management said its index rose 1.1 percentage points in February, to 54.2% from January’s 53.1%, highest reading since June 2011, when the index was at 55.8%.” The ISM said that, as “in January, all five component indexes - new orders, production, employment, supplier deliveries and inventories - registered in positive territory in February.”

The AP reported, “The pickup in factory activity in February was encouraging because it showed demand for goods is stronger even as consumers have less take-home pay because of higher Social Security taxes. It followed a separate report that consumers cut back spending on long-lasting manufactured goods in January, likely because of the tax increase. US manufacturers are also showing strength just also billions of dollars in across-the-board government spending cuts are set to start.”

m

Achieve more...

One Small Step With one small step, a man became a hero and the impossible became a reality.

The same heroic spirit that fueled the space race and placed the first man on the moon still lives within the people who support NASA’s continued pursuit of innovation. Using GF AgieCharmilles HPM 800U machines, NASA experts manufacture the technology that continues to propel science beyond what we think possible.

From that first lunar landing to modern space exploration, the heroes behind these accomplishments take small steps every day that amount to giant leaps for mankind.

Read more about how GF AgieCharmilles helps NASA achieve more at us.gfac.com/hero.

To access the GF AgieCharmilles mobile website, download a QR code app and scan this image.

Tel. (800) 282-1336

us.gfac.com A2Z METALWORKER

• 19 •

March/Apr 2013

801-487-9700 www.superiorgrinding.com 245 West Crossroads Square S. Salt Lake, Utah 84115

NOW NOW ISO ISO 9000...2008 9000...2008 CERTIFIED CERTIFIED Long bar grinding up to 20’ long. (Dia depends on Weight) Some Bar Straightening.

(We can supply you with material ground to size or you can have your material sent to us to be ground to size.)

Centerless grinding (polish or stock removal) Plunge grinding (Close tolerance and long runs) (Specialize in Production Runs of, pins, shafts, medical parts etc) Angle or surface 144” x 8” x 4”

Through feed grinding up to 5” OD (Length depends on weight) Blanchard grinding 40” swing and 14” under head I.D./O.D. grinding Digital Readout Close Toll. O.D. – 45” L x 12” O.D. I.D. – 9” depth x 10” I.D. Blade Grinding Industrial Machines-12 foot long magnetic beds Surface grinding (12” W / 28” H / 52” L)

We can supply you with material ground to size or you can have your material sent to us to be ground to size.

Researchers. Unveil. First.

4-D.Printer TheWired “Business” blog reported, “There are 3-D printers that build things up, adding one sliver of plastic at a time, and 3-D mills that tear things down, grinding away one small chunk at a time. But Skylar Tibbits today offered a very provocative alternative: technology for 3-D printing where the chunks start separated and intelligently arrange themselves into basically any object.

Tibbits’ latest technology for so-called ‘4-D printing,’ uses water to activate and power strands of material that fold themselves into desired shapes.”

The New York Times “Bits” blog reported, “The self-folding structures are first printed out as long strands made of two core materials in combination - a synthetic polymer that can expand to more than twice its volume in water, and another polymer that is rigid in water. By carefully combining the two materials using specific blueprints, the expansion of the water-absorbing substance drives the joints to move, creating a predetermined geometrical transformation.”

A2Z METALWORKER

•

20 •

March/Apr 2013

Currently,Tibbits “has created two working prototypes: one that slowly snaps into the letters ‘MIT’ and another that changes into a simple cube.The speed of transformation depends on the temperature and buoyancy.

Kendall.Eyes.More.Funding.

For.Industrial.Base The Pentagon’s top procurement official is considering a strategy of funding research and development projects despite ongoing budget pressure, a slight shift from his fervent push to only proceed with well understood, affordable programs.

the Defense Advanced Research Projects Agency that could lead to the next-generation fighter. And, he says, it could be the first of such low-level projects he views as a potential hedge against budget pressure eroding the U.S. global military advantage.

He says that in earlier periods of substantial downward defense spending, some key leaders made conscious decisions to invest in specific technologies, guarding that funding from the budget ax. Though all of those programs did not come to fruition, among them were such stalwarts as the F-16, Abrams tank and Patriot air and missile defense system.

Frank Kendall, under secretary of defense for acquisition, says that the increasing pressure on the Pentagon budget — is driving him to consider moving slightly away from his staunch support for embarking only on programs that are considered “affordable,” and for which senior leaders have a clear understanding of the cost and risk.

An advantage to this strategy is providing at least some funding to keep the cutting edge of the industrial base working on advanced technologies. It also better postures the government to deal with adversaries that may not have restricted budgets and whose technology advances at a rapid pace.

This shift could lead to the first new Xplane in a generation of military technology, he says. Kendall is starting an air dominance initiative with the military services and

Kendall says he is only early in the process of considering this shift, and it does not indicate an abandonment of the push for affordability for Pentagon programs.

Five.Myths.About.Manufacturing.Jobs

Washington Post, By Ro Khanna

Why Contact Faustson Tool?

• We are a leader in 5 Axis Manufacturing Technology Technology, including 5 Axis Milling and 5 Axis EDM. • We have 30 Years of Experience Servicing Customers.

Fauston Tool is a Woman Owned Small Business.

• Our customers span the Aerospace, Defense, Medical, Semi-Conductor, Energy and Aeronautic industries.

• Our certifications include: ISO 9001:2000, JPL Flight Certified , Ball Flight Certified, MPC Flight Certified , LASP Flight Certified, ITAR Certified Ball Aerospace: First ever delegated supplier

Call Today! www.faustson.com • 303.420.7422 6803 Joyce Street, Ste A Arvada, CO 80007

TVT DIE CASTING Precision aluminum and zinc die casting, machining and finishing.

Quality, Reliability and Service

In his State of the Union address, President Obama said that creating manufacturing jobs is the nation’s “first priority.”To some, this may sound like a throwback to a long-lost era; after all, such jobs are being eliminated, outsourced or automated, right? Not really.The United States remains a world leader in manufacturing, and that sector remains essential to our economic and technological future. Here are the five biggest misconceptions about U.S. manufacturing — and why the sector still matters.

1. A manufacturing job is no longer a ticket to the middle class.

There is no doubt that America’s manufacturing base has declined, peaking at 19.6 million jobs in 1979 and now at just over 11 million jobs. Despite this economic transition, however, U.S. manufacturing jobs are still worth having. On average, full-time manufacturing work pays 20 percent more than full-time service-sector jobs. In my recent travels across the country, I met electronic technicians with only a high school diploma who had risen through the ranks of manufacturing companies to earn more than $100,000 a year. High school grads in retail or service-sector jobs rarely reach six figures.

Of course, manufacturing alone cannot solve our unemployment problem.

For the foreseeable future, the lion’s share of America’s job growth will be in the service sector. By 2014, employment in services is expected to reach 129 million jobs, with education and health care growing most quickly. Still, there are lucrative careers available in manufacturing. And Obama’s State of the Union proposal to create manufacturing hubs across the country — “to turn regions left behind by globalization into global centers of high-tech jobs” — will generate opportunities for young Americans with an aptitude for making things.

2. We can outsource manufacturing as long as product design stays here.

Andy Grove, the former chief executive of Intel, has famously argued that the best innovation takes place when design teams are integrated with production teams. Product designers can get feedback about the practical constraints involved in manufacturing and can fine-tune their designs accordingly.

Apple has said that it is investing $100 million in new U.S. plants — a move hailed as bringing manufacturing back to our shores. However, Apple has always done most of its prototype manufacturing in the United States. The company may mass-produce iPhones in China, but it has maintained U.S. factories as laboratories to perfect its products before launch. Now, rising wages in China and transportation costs have encouraged Apple to manufacture some of its Mac lines here.

We are a full service job shop, providing as much or as little project involvement as required – from tool and die design to finishing and assembly.

tvtdiecast.com ITAR Registered

A2Z METALWORKER

•

800 280 2278

ISO 9001:2008 Certified

22 • March/ Apr 2013

SMHINC

▼

LLC

It is naive to think we can keep design in America without retaining some manufacturing capacity. Harvard Business School professors Willy Shih and Gary Pisano have shown that the offshoring of semiconductor manufacturing that shifted silicon processing to Asia, for example, gave companies there an advantage in designing solar panels and energyefficient lighting.

3. U.S. manufacturing can’t compete with China.

Over the past decade, the growth of Chinese manufacturing has ex-

ceeded America’s, so for the first time, China has taken the lead in global manufacturing.Yet, for all the hype about the BRIC economies — Brazil, Russia, India and China — the United States remains neck-and-neck with China in manufacturing output, and we still far outstrip such traditional powerhouses as Japan and Germany. China and the United States each produce about one-fifth of the world’s manufacturing, yet we do so with only about 10 percent of our economy devoted to that sector, compared with nearly 40 percent of the Chinese economy.

What keeps us in the race is our productivity advantage. U.S. manufacturing workers are almost six times as productive as Chinese workers and 11 / 2 times as productive as those in Japan and Germany.

The best American manufacturers customize products to meet customer needs, reduce the time required to make them and constantly improve their design.Vitamix in Cleveland, for instance, makes specialized blenders that are more expensive than those produced in Asia — but Starbucks buys them because they are quiet and leave few lingering ice chips in Frappuccinos.

4. Manufacturing jobs are repetitive and low-skilled.

If you think of manufacturing as a tedious job with no intellectual stimulation, you haven’t visited a U.S. factory floor lately. Whether making steel bars or suits for firefighters, many of today’s manufacturing jobs require the ability to operate complex machines, math skills and an understanding of how to maximize efficiency.

No doubt, every job has repetitive aspects.As a lawyer, I can assure you that a lot of document drafting is repetitive, involving cutting and pasting from templates. But the best lawyers bring a unique perspective to the process and anticipate clients’ problems. Similarly, the best manufacturing workers are not just doing repetitive tasks; they are thinking about how to improve a product’s design or production.

GladhillAssociates Associates International Gladhill International

TRAINING-- CONSULTING CONSULTING - -AUDITING TRAINING AUDITING

ISO 9001/14001 9001/14001 RABQSA Certified Online/Public ISO RABQSA Certified Online/ Lead Auditor Courses Public Lead Auditor Courses AS9100 RABQSA & AS9110 RABQSA Public - In-House/Customized Accredited Lead Auditor Courses AS9100 & AS9110Courses RABQSA Public - RABQSA In-House/Customized Accredited Lead Auditor AS9100 & AS9110 RABQSA *ISO 9001RABQSA /*ISO 14001 / *ISO 9100 Accredited Lead Auditor *ISO/TS 16949 /*OHSAS 18001 & *ISO 9001 /*ISO 14001 / *ISO 9100 *ISO 17025 Internal Auditing *ISO/TS 16949 /*OHSAS 18001 & (* Denotes On-Line and Public Courses Available) *ISO 17025 Internal Auditing

(* Denotes On-Line and Public Courses Available)

Certified Training!

Certified Online Online Training!

Human Factors - Corrective/Preventive Action Human Factors - Corrective/Preventive Action Process Mapping - Six Sigma - Implementation Process Mapping - Six Sigma - Implementation Documentation - Management Overviews Documentation - Management Overviews ISO/AS Software Modules ISO/AS Software Modules

For more informationcall: call: 719.495.8045 For more information 623.939.4412 or visit: www.gladhillassociates.com or visit: www.gladhillassociates.com email:brodish@gladhillassociates.com

5. Government is terrible at supporting manufacturing.

America has long had a bipartisan consensus favoring government support for private manufacturers. In 1791, Alexander Hamilton argued that the nation should provide incentives and assistance to manufacturers to compete in the world economy. Even Thomas Jefferson came around to the view that government has a stake in building domestic manufacturing.

These principles influenced Herbert Hoover, who before he was president was regarded as a great commerce secretary and provided financial support for the aviation industry. Later, President Ronald Reagan supported Sematech to help our semiconductor industry.

Of course, America’s free-enterprise system is what enables our manufacturers to be the most innovative. No one is suggesting that the government pick winners or losers. Some bets on new companies, such as Solyndra, are bound to fail.

But such failures should not deter the government from investing in DARPA, a strategic agency at the Defense Department, or ARPA-E, a strategic agency at the Energy Department, which can propel innovation, new technologies and new industries.We also must help keep manufacturers at home through tax incentives, attract immigrants and better prepare a skilled workforce. And we must continue the collaboration between government and business that helped make America an economic superpower.

A2Z METALWORKER

•

A2Z METALWORKER

66 •Mar/Apr 2010

• 23 •

March/Apr2013

Proud US Manufacturer Of Mining Equipment For More Than 3 Decades With The Help of Doosan Machine Tools

Stu Blattner Inc. is a well-known name in the mining industry. Founded in 1980 by brothers Stu and Bruce Blattner, today the company is both a raisebore contractor as well as a raisebore manufacturer. Their end products are used for underground mining and public works projects.

A raisebore is a machine used in underground mining, to excavate a circular hole between two levels of a mine without the use of explosives.

The raise borer is set up on the upper level of the two levels to be connected, on an evenly laid platform (typically a concrete pad). A small-diameter hole (pilot hole) is drilled to the level required; the diameter of this hole is typically 230mm - 350mm (9” - 15”), large enough to accommodate the drill string. Once the drill has broken into the opening on the target level, the bit is removed and a reamer head, of the required diameter of the excavation, is attached to the drill string and raised back towards the machine. The drill cuttings from the reamer head fall to the floor of the lower level.The finished raise has smooth walls and may not require rock bolting or other forms of ground support. A liner is sometimes installed to prevent the hole from caving in.

After graduating from Colorado State University, Stu went to work for a company called Subterranean. It is here where Stu learned how to operate and manufacture raiseborers. Stu’s employer was hit by the economic downturn in the late 1970’s that was especially hard on the mining industry, and the company closed down.

Subterranean had a number of customers who still required support for their machines.They often needed components of their machines rebuilt, or they just needed their machines serviced. Stu and his brother Bruce, a trained electrician, took the opportunity to open a business just to support Subterranean’s previous customers, and hence Stu Blattner Inc. was formed. Today, Stu spends the majority of his time at the company plant in Peru, and Bruce supports the company from the headquarters in Golden, Colorado. Bruce’s sons Jesse and Colt, and Stu’s sons Marc and Chad, and his daughter, Dayna, are all active members of the Stu Blattner Inc. team.

Jesse says, “Stu and Bruce started the business from nothing.They took out loans, and through very hard work, they made the business a success. Today, we are the largest raise bore contractor in the United States and one of the largest in the world. Currently we have 19 raisebore machines in our fleet, operating in South America, North America and Australia.”

With over 20 years of raisebore experience and over 150,000 feet raised, Stu Blattner A2Z METALWORKER

•

24 • March/ Apr 2013

Inc. has perfected their drilling program saving time and money with their clients over the conventional methods. They cater to their customers offering such services as “low profile” machines. They also have experience with special requests such as developing the “Y” system, where they pull one raise out of another.

Jesse states Stu Blattner’s equipment is predominantly used in mining ventilation shafts, ore passages or manways, along with hydroelectric projects for the use of drilling large diameter holes. They have the capacity to drill from 9 inch to 20 feet in diameter and up to 1500 feet in length depending on the rock conditions.

In addition to raisebore contracting, Stu Blattner also manufactures raisebore machines, reaming heads (from 26” to 20’ in diameter), drill pipe and cutters. This puts them in the unique situation of supplying themselves with the equipment needed for a job, and allows them to offer the customer the lowest price, coupled with the best customer service in the industry.

Some of their more recent contract work was for companies such as Allen Co, in Boonsborough, Kentucky; Santa Fe Gold Co., in Duncan, Arizona; JM Huber Co., in Marble Hill, Georgia; Barrick Gold Co., in Crescent Valley, Nevada; United Drilling, in Las Vegas, Nevada; Freeport-McMoRan, in Henderson, Colorado; Barrick Goldstrike, in Elko, Nevada; and Guy Atkinson Construction, in Chicago, Illinois.

Stu Blattner’s raisebore machines are manufactured with heavy-duty steel, so the machine tools that they use to manufacture their machines must be extremely robust. Jesse explained, “About 5 years ago, we came to Foothills Machinery to purchase our first Doosan, a PUMA 800. It is the most powerful heavy duty turning center equipped with box guide ways.”

In the past year, Stu Blattner purchased 2 more Doosan machine tools, the PUMA 3100, a high performance next generation turning center, and the Doosan Mynx 5400, a vertical machining center, with a box-type guideway adopted for strong, hard cutting.

Jesse asserted, “We like the Doosan machines, and we are really very happy with our machine tool dealer, Foothills Machinery. Since the Doosans are so reliable, we don’t have a lot to say about Foothill’s service. Literally, we’ve only called them for maintenance. However with getting a machine setup they are very good and make sure their customers are completely satisfied. When we need a machine, Foothills Machinery is who we will always call first.”

If you are in need of a raisebore hole or equipment to do so, you must call Stu Blattner Inc., a proud United States manufacturer.You can learn more about them by calling (303) 233-2856 or visiting their website at stublattner.com.

Since 1984, Foothills Machinery Sales is the Rocky Mountain’s dealer for some of the best machine tool lines in the world. Their customers span a large portion of the Rocky Mountain States, including Wyoming, Colorado and New Mexico. Contact them to learn how they can help your precision machining needs. You can reach them at (303) 466-3777 or you can visit their website at foothillsmachinery.com.

A2Z METALWORKER

• 25 •

March/Apr2013

the period and reflected in every region of the world. This is 35 percent higher for this three-year period than was recorded in last year’s survey. The 5,600-unit figure represents Honeywell’s expectation that demand in 2016-2017 will increase as operators firm up purchase plans.

UTAH METAL WORKS www.umw.com

Tollfree: 866-434-5679 Local: 801-364-5679

How Much Is My Metal Worth?

CALL US

now to find out!

At Utah Metal Works, recycling industrial-related scrap metal is one of the things we do best. You simply won’t find more knowledgeable, capable partners for your scrap handling and recycling efforts anywhere. We are known in the industry for our honesty and integrity, and you can be sure you are always getting a competitive return along with superior service. We make it easy for you to cash in on non-ferrous metals from:

Industrial/Manufacturing Scrap • Punchings • Solids of any metals • Turnings and borings

• Skeleton plate • Machine Shop/Fabricator • Solids of any size or type

Aircraft/High Temperature Alloy Scrap Stainless, titanium, Inconel, Hastelloy, Monel, cupronickel, aluminum;state-of-the-art metal analysis conducted on site; Mixed or contaminated items are accepted and sorted Easy Access To I80, I15, and I215 Detailed Directions On Our Website 805 West Everett Ave • Salt Lake City, UT 84116

Robotic.Exoskeleton.Gets.International.Safety.Certificate AFP reports, “A robot suit that can help the elderly or disabled get around was given its global safety certificate last month, paving the way for its worldwide roll-out.”The Hybrid Assistive Limb, “which detects muscle impulses to anticipate and support the user’s body movements, is designed to help the elderly with mobility or help hospital or nursing carers to lift patients.” AFP noted, “A different version of HAL - coincidentally the name of the evil supercomputer in Stanley Kubrick’s ‘2001: A Space Odyssey’ - has been developed for workers who need to wear heavy radiation protection as part of the clean-up at the crippled Fukushima nuclear plant.”

Honeywell.Sees.Helicopter.Sales.Growth.Ahead Global demand for helicopters is expected to increase over the next five years, according to the results of Honeywell’s Turbine-Powered Civil Helicopter Purchase Outlook survey, released at Heli-Expo ‘13. Deliveries of new civilian-use helicopters will total between 4,900 and 5,600 units during 2013-2017 according to the survey, with strong demand focused in the first three years of A2Z METALWORKER

•

26 • March/ Apr 2013

“The buyer confidence reflected in this year’s survey is a much-needed shot in the arm for the industry,” said Brian Sill, vice president, Honeywell aftermarket helicopter sales. “Supporting the growth numbers is the fact that helicopter usage for corporate, oil and gas, utility and training missions is improving, which shows that helicopters are value-add aircraft in today’s business environment.”

The results of this, Honeywell’s 15th such annual survey, are based on queries to more than 1,000 chief pilots and flight department managers of companies operating 2,400 turbine and 275 piston helicopters worldwide.

Several factors are driving the increased demand: aging aircraft fleets, contractual requirements, changes in operational requirements, expiring warranties and regulations requiring twin-engine helicopters.

The U.S. and Canada are expected to account for 27 percent of the purchases, while Europe will absorb 28 percent. Latin and South America will account for 20 percent, Asia/Oceana 19 percent, and Africa/Middle East will account for 6 percent of new helicopter deliveries.

The 2013 forecast represents a rebound, after the 2012 survey found a 4-percent decrease in demand over the 2011 report. Honeywell believes this indicates that the industry “may be returning to a more expansionary environment.” Light single-engine helicopters are the most in-demand product in this time period, exemplified by the Eurocopter EC130/AS350 series, Bell 407 and Robinson R66.

ALMAR TOOLS, INC A leader in the custom tool manufacturing industry and CNC tool sharpening Manufacture of special end mills, form cutters, step drills, and step reamers Manufacture of special shapes and contours on the cutting edge of technology Dedicated in complex solid carbide form cutters with a prompt delivery Quotes returned same day with PDF drawing

www.almartool.com

Visit the TOOL BUILDER and see how easy it is to get a paperless quote

Distributors, please contact us for more information Short orders email sales@almartool.com phone: 503.255.2763 | fax: 503.255.5720

Most of the purchase interest for the aircraft is in North America, though the Middle East and Africa have a noticeable surge in interest in these models. Intermediate/medium twin-engine helicopters (e.g., AgustaWestland AW139, AW169, Bell 412, EC145, Sikorsky S-76) and light twin helicopters (e.g., EC135, Bell 429, AW109) each garnered about 25 percent of the intent to purchase. Planned purchases of heavy multi-engine helicopters (e.g., EC225, Russian Helicopters Mi-171, Sikorsky S-92) actually declined slightly from 2012 levels.

Increased Utilization Meanwhile, operators plan to expand the use of the helicopters they already have, according to the survey. In North America, 10 percent of operators plan to increase utilization, while 3 percent plan to fly less. In Europe, about twice as many operators (16 percent) plan to fly more versus flying less (7 percent). In Latin America 27 percent of operators plan to increase utilization while only 5 percent see themselves flying less. One third of operators (33 percent) in the Middle East and Africa say they will increase flight ops while about half that number (15 percent) plan to decrease operations. Operations in Asia could see the greatest increase, with 35 percent planning to fly more versus 6 percent anticipating reduced operations.

As for actual flight time, the survey found oil and gas operations reported flying their helicopters an average of 725 hours per year.

Helicopters used in EMS, training, air tours and general utility average 410 to 450 hours per year. Law enforcement and news-gathering operations log an average of 375 to 390 hours per year, while corporate

operators put the least time on their rotorcraft, flying on average less than 300 hours per year per aircraft.

The survey also contains something of a popularity contest that could indicate which helicopters and OEMs will be the big winners in this increased sales environment. The top models named (order not indicated in the survey) are the AW139, Bell 206 series, Bell 407, Bell 412, EC130/EC150 series and Sikorsky’s S-76.

Ford.To.Increase.Number.Of.Alternative.Fuel.

Trucks.And.Vans.Offered Ford Motor Co. is boosting the number of trucks and vans its offers that run on compressed natural gas and propane as sales rise and demand grows for cleaner fuel fleets. The Times notes that “since 2010, according to Mike Levine, truck communications manager for Ford, the company has seen its sales of compressed natural gas-fueled trucks and vans rise to 11,623 last year from 3,277 in 2010.” Ford expects sales to top 13,000 in 2013. Moreover, “while the national infrastructure for refueling or recharging vehicles that run on electricity, hydrogen, compressed natural gas, liquefied natural gas or bio-fuels remains spotty at best, propane fueling stations are broadly available throughout the U.S.” The Times also reports that the push for cleaner trucks comes from both higher gasoline and diesel prices and from governments and businesses that want to show that they are going green.

A2Z METALWORKER

• 27 •

March/Apr2013

Precision Parts Made Quickly and Accurately with the Help of Mazak Machines Located in the foothills of the Wasatch Mountain Range in Ogden, Utah, you will find a superior machine company called Quick Turn Precision Machining.

The company is a full service machine shop specializing in small to medium rapid turnaround precision machine work -from custom tooling and intricate molds to small-specialized parts. In addition to state-of-the-art CNC milling, turning and water-jet cutting, the company also provides heat-treating, sandblasting, welding, fabrication, and technical drawing to meet all your needs.

Quick Turn Precision Machining founders/brothers Nate and Adam Woods knew that they had a passion for precision manufacturing from an early age. Shortly after high school, the two studied precision machining at the Ogden Applied Technical Center (OATC). After graduating from OATC, Nate and Adam each spent years working for other companies in the manufacturing industry, and Nate is particularly grateful for the formal apprenticeship experience he received from Autoliv, his previous employer.

16 years ago, the brothers founded Quick Turn Precision Machining to provide for the growing needs of quality, rapid turn around, high quality machined parts. Since 1997 Nate and Adam have been steadily building a highly reputable standout business.

They love to make things—and make them well—and it shows in every facet of their business. Nate continues to direct and lead the company, and the experience and education of building Quick Turn has only increased his love for his trade, and the team he has put together.

Today, Quick Turn’s customers span the defense, aerospace, engineering, automotive, recreational and automation industries, and while most of their work is done for local customers, through referrals from their customers, they now have customers throughout the Western United States. Adam says, “We have customers who are a start-up company designing a new product, and we’ll make 1 or 2 prototypes for them, and then we have customers who are publicly held, with sales in the billions.We are dedicated to providing superior customer support and end products to both ends of the spectrum.”

A2Z METALWORKER

•

28 • March/ Apr 2013

Hear From Some of Quick Turn’s Customers “We go out of our way to use Quick Turn, for a number of reasons. One of the most important is their service -- it is just so over the top.

We started using them about 10 years ago, and they make various smaller machined components for us. Their pricing is very competitive, and their flexibility and customer service is outstanding.

We often come to Quick Turn with incredibly rapid turn projects, and they make things happen in a heartbeat.

Recently, a team from Universal Studios audited them. Based upon a very successful audit, Quick Turn was one of very few shops in the country that will build products for Set Point Engineering, who specializes in the amusement park industry. Quick Turn’s products will eventually be an integral part of the rides you might take your children or grandchildren on at Universal Studios.

Nate says, “We have deliberately grown the business slowly and steadily since our inception. Since our name ‘Quick Turn Precision Machining’ implies that we specialize in the ability to turn products around to our customers faster than most others can do, it is imperative that we take on new customers as our capacity and capabilities allows.”

The company employs 20 machinists today, many who have been with Quick Turn for a decade. They additionally hire young, new machinists, and Adam spends the time needed to mentor these young machinists. Nate says, “We train every one of our employees to become journeymen machinists.” At Quick Turn, everyone can program and make parts, including Nate and Adam, who admit they are very hands on, and still enjoy making parts. Nate says, “We don’t just have operators.”With a solid backlog early into this year, Nate and Adam recently added a swing shift to accommodate their customers.

Nate says, “A few years ago, many of our long time customers began coming to us with more complicated parts, with typical tolerances ranging from .0005 to .001. We knew that we had the skill set in our employees to tackle these new jobs, but we needed to invest in additional equipment that could support these complex parts.”

Adam says, “We evaluated premium high precision machines from a few different builders, and ultimately, we chose Mazak. That was 3 years ago, and since then, we are equipped with 5 Mazak machines.” The company has 4 Mazak turning centers and a Mazak mill. Just months ago, Quick Turn purchased their first true 4th axis.

Nate and Adam both agree that there are a number of reasons why they continue to build their business with Mazak machines. Nate says the number one reason is ‘trust’, trust in the reliability and quality of the machine, and trust in the machine tool dealer they buy from in Utah. Nate says, “I have worked with Scott Trumble for about 20 years now. We first met when I was opening up a machine shop at Autoliv. Scott works for Smith Continued Next Page

Another thing we value in Quick Turn is that their equipment is top of the line. They make an effort to stay ahead of the technology curve, and this really helps us. Quick Turn is just outstanding.”

Project Manager Automation Manufacturing Company “Quick Turn’s service is amazing! Their pricing is very reasonable, often lower than other bids we get. I think they can offer superior pricing because they manage the shop very well, and they turn the parts around so quickly.They also keep a very clean shop, which is clearly a reflection of their pride in producing perfect parts.

Quality at Quick Turn is really, really good, and they always meet the tight tolerances we require for our aerospace parts. Quick Turn makes all types of aluminum tooling and fixturing for us.

The team at Quick Turn forms a great relationship with its customers. We work closely with Jeff, and he drops in every few weeks just to make sure things are going well.We are so pleased to be working with this excellent company!”

Design Engineer/Principal Aerospace Manufacturing Company “I give Quick Turn an ‘A’ grade.We’ve been using them for 3 or 4 years now. They make plastic and aluminum subassemblies for us. We continue to use them because their quality, pricing and turnaround are all very good. When we need them on a rush job, they are always there for us.

The team at Quick Turn is very competent, and we will continue to do business with them. Let’s say they are on our Christmas list for 2013!”

CEO Design and Development Manufacturing Company A2Z METALWORKER

• 29 •

March/Apr2013

Machinery Company today as a Sales Engineer, and I completely trust Scott and the team at Smith Machinery. They are good, trustworthy people who are expert in the machine tool field.”

Nate and Adam value the service they receive from both Smith Machinery Company and from Mazak direct. Adam says, “Smith Machinery has an outstanding service team, and Mazak has a local service person.Though our machines are extremely reliable, and we rarely have a problem, it is great that when we do, we are serviced immediately. For a small shop like ours, it is critical that our machines are always up and making parts.”

What else do they like about the Mazak machines? Nate and Adam value the userfriendly Mazak controls, and they really like that Mazak is one of the few machine tool builders that are making machines in the USA. Space is at a premium at Quick Turn Precision Machining. The brothers expect that they will soon have to move to a larger facility. One of their latest machine tool purchases, the Mazak Vertical Center Smart 530C was perfect for a crowded shop. It is a compact, highly productive machine that provides unsurpassed performance and value for a variety of applications requiring heavy-duty machining, high-speed machining or both.

Quick Turn’s latest Mazak machine purchase was the Quick Turn NEXUS250-11MSY. It is a fitting machine tool name for Quick Turn Precision! Nate says this machine brings together advanced technology, productivity and value to deliver exceptional performance for his shop. It offers multi-tasking capability with milling and turning in single part setups. Power and speed is increased in virtually every category. Plus, the machine comes equipped with the Matrix CNC control, featuring simple, smart conversational programming, complete with monitoring and diagnostics.

Quick Turn just purchased the FARO Edge, an advanced measurement tool. The Edge allows Quick Turn to easily verify their product quality by performing inspections, tool certifications, CAD-to-part analysis, and reverse engineering. It is just another step Quick Turn took to support its customers.

Quick Turn Precision is poised to take on new customers who demand precision parts made accurately and made quickly. For more information, call them at (801) 334-6800 or visit their website at quickturnmach.com.

A2Z METALWORKER

•

30 • March/ Apr 2013

To learn more about the superior line of Mazak machine tools, contact Smith Machinery Company in Utah at (801) 263-6403 or visit their website at smithmachinetools.com.

1974 Bucktail Lane • Sugar Grove, IL 80554 1-888-289-3367 • www.EDMNetwork.com A Z METALWORKER • 31 • March/Apr2013 inf@EDMNetwork.com 2

American Global Standards, LLC 1187 Coast Village Road #495 Montecito, CA 93108 617 838 4648 info@americanglobal.org www.americanglobal.org

AGS VIRTUAL CERT™

A Virtual Program For ISO 9001:2008, AS9100 Rev. C, And ISO 14001

$500.00 per Year

 No travel expenses, No other fees!  Save Your Company Thousands Annually (Minimum savings: $2,000 & up to $50,000 annually) Save Top Management Valuable Time  AGS has been a Registrar since 1993 Serving More Than 4000 Customers Worldwide AGS is accredited by the American International Accreditation Organization, Bureau of Accredited Registrars (AIAO-BAR) an independent, not-for-profit organization.www.aiao-bar.org

NASA.launches.new.space.tech.and.exploration.division NASA has suffered budget cuts and freezes the past several years, but apparently things are looking up for the U.S. space agency. Last month, NASA announced that it was creating a new organizational division geared toward investing in space technology, equipment, and exploration.

“A robust technology development program is vital to reaching new heights in space -- and sending American astronauts to new destinations like an asteroid and Mars,” NASA administrator Charles Bolden said in a statement. “A top priority of NASA is to invest in cross-cutting, transformational technologies.”

The Space Technology Mission Directorate was inspired out of President Obama’s 2013 federal budget bid that asked for investment in “a broad spectrum of space and aviation technology research grants and demonstrations of high-priority technologies, from laser space communications to unmanned aerial systems to in-space transportation.”

In 2010, NASA’s post-Columbia moon program came to an end and the development and operation of new rockets and capsules shifted from the government to private industry. In 2011, NASA was faced with further uncertainty as the Obama administration froze federal funding to 2010 levels for the following five years.

But, in 2012, things started to look up as it was revealed that the Obama administration approved new mission plans that could involve parking a spacecraft near the moon. Apparently, NASA has been looking into the possibility a new manned moon mission with the purpose of creating a manned outpost beyond the far side of moon and eventually visiting an asteroid in 2025.

It’s unclear how much money NASA wants to put into the Space Technology Mission Directorate. It’s also not yet known how much of the $699 million Obama asked for in his 2013 federal budget request will get passed by Congress.

Solar-Powered. Plane.To. Make. Cross-Continental.Flight.This.Summer Discovery News reported, “A plane that can fly on solar power, day or night, will make its way across the United States this summer - the first time the plane has attempted a cross-continental flight.” The plane, “built as a project of the Swiss Federal Institute of Technology, the brainchild of Bertrand Piccard and André Borschberg,” flies “thanks to four turboprop engines powered entirely by batteries and solar panels.” During its flight, the aircraft “will maintain a specific altitude about 29,000 feet, where the engines operate with maximum efficiency. All things normal, the Solar Impulse could, Borschberg said, could travel for 20 hours.”

A2Z METALWORKER

•

32 • March/ Apr 2013

WITH WITHSO SOMUCH MUCHMORE MORE SPEED, SPEED,POWER POWERAND AND FLEXIBILITY. FLEXIBILITY. THERE’S THERE’SJUST JUSTNONO LIMIT LIMITTOTOYOUR YOUR ABILITY TO MAKE ABILITY TO MAKE WHAT MATTERS.

WHAT MATTERS.

TheMakino MakinoPS-Series PS-Serieshas has The additionalcapabilities capabilitiesyou yousimply simply additional won’tfind findononyour yourcurrent currentVMCs. VMCs. won’t Like Likespindle spindlespeed, speed,power powerand and torque torquetotohandle handleaggressive aggressivecuts cuts inintough materials that reduce tough materials that reduce cycle cycletimes. times.InInother otherwords, words, everything everythingyou youneed needtotomake make more moreparts partsfaster fasterand andatata alower lower cost. cost.Because Becausewhen whenyou youmake make what whatmatters, matters,that’s that’sthe thekind kindofof performance performancethat thatreally reallycounts. counts.

See Seeall allthe theways waysthe thePS-Series PS-Series expands your capabilities. expands your capabilities.

MAKINO.COM/PS MAKINO.COM/PS

WHEN WHENYOU YOUMAKE MAKEWHAT WHATMATTERS MATTERS

Denver Showroom:

SLC Showroom:

637 Osage Street Denver, CO 80204 Ph: 303.571.4933

3676 W. California Ave. SLC, Utah 84104 Ph: 801.886.2221

For more information on all Makino products in Arizona, contact David Gundersen at 602-228-0347 or David.Gundersen@makino.com. www.moncktons.com © 2012 Makino

A2Z METALWORKER

• 33 •

March/Apr2013

Boeing. and. Sikorsky. offer. X2.Technology. design.for.US.JMR.TD.program

7130 West 117th Avenue, Unit D-4, P.O. Box 1904, Broomfield, CO 80038

Call Jim Daldos Or Virginia Ebert Today 303-466-7342 • Fax 303-465-2117 We Specialize in Structural and Sheet Metal Fabricating Equipment. We Can Provide Engineering and Consultation for Your Individual Needs.

PRESS BRAKES BANDSAWS ANGLE ROLLS PRESS FEEDS PUNCHES & DIES COLD SAWS BRAKE TOOLING SHEAR BLADES WATERJET COPING TOOLS

SHEARS IRONWORKERS PLATE ROLLS PUNCH PRESSES TURRET PUNCHES TUBE BENDERS SPOT WELDERS BURNING TABLES SAW BLADES NOTCHING TOOLS

www.fabricatingequipmentsales.com

BMSC, LLC

Business Management Systems Consulting

Prepare for ISO 9001/ AS9100 Certification For Only $3500! $3500!

Contact Bretta Kelly Today!

602.445.9400 www.businessmsc.com

“When Bretta told me that ISO shouldn’t be treated as “Rocket Science” I started listening. She was able to back it up with explanations we could understand. The difference we found with Bretta over other consultants we have talked to is that she herself has gone through the pain of ISO internally when working in quality departments. She is the President of her own company and is a certified auditor.”

George G. Crouch, Advotech Company A2Z METALWORKER

c

.. ing

•

34 • March/ Apr 2013

Jet Processing is now

Boeing and Sikorsky have teamed up to offer a joint proposal for the US Army’s joint multirole (JMR) technology demonstrator (TD) phase 1-air vehicle development program.

Based on Sikorsky’s X2 Technology rotorcraft design, the proposal is being submitted in response to the JMR TD program solicitation released by the Army Aviation Applied Technology Directorate (AATD) in November 2011.

A partnership agreement was signed by both companies earlier this year for the joint proposal, which covers development and test flight of one or more demonstrator aircraft, to help the army specify requirements for a next-generation vertical lift utility and attack aircraft.

The JMR program is for development of helicopters with enhanced avionics, electronics, range, speed, propulsion, survivability, operating density altitudes and payload capacities.

Almost.Two.Thirds.of.all.the.Safety.Products. in. Europe’s. Best. in. Class. Cars. Produced. by.

Autoliv In 2012, Euro NCAP published the safety rating for 36 vehicles available in the European market. The organization recently highlighted eight five-star vehicles in different categories that stand-out for performing especially well in protecting passengers and pedestrians.These eight vehicles have one thing in common; passive and active safety products from Autoliv. One example is the Volvo V40 that reached the highest combined score of any car previously tested by Euro NCAP. Among other products from Autoliv, the Volvo V40 is equipped as standard with the world’s first pedestrian protection airbag.

“To see so many Autoliv products in the safest cars in Europe is a testament to our drive to provide innovation, quality and the best products to our customers, said Jan Carlson, CEO of Autoliv. This is an important acknowledgement, which strengthens us in our commitment to the strategy of saving lives”.

Euro NCAP rate vehicles in four individual tests: adult occupant protection, child occupant protection, pedestrian protection and safety assist systems.

The eight best vehicles in 2012 are Renault Clio,Volvo V40, Fiat 500L, Ford Kuga, Ford B-max, Hyundai Santa Fe, BMW 3-Series, and Ford Transit. Between them the vehicles feature the full range of Autoliv products, from side, and frontal airbags, inflatable curtains, pedestrian protection airbags, steering wheels, passive safety electronics and seatbelts to the latest in active safety technology.

www.resourcemfg.com We’re Not Just A Nationwide Staffing Firm.

We’re A Nationwide Staffing Firm Specializing in Manufacturing.

That’s All We Do. Period.

• CNC Programrs • Press Operators • CNC Machinists • Assemblers • Manual Machinists • Quality Control Inspectors • Maintenance Mechanics • MIG/TIG/Stick Welders

Call One of Our Local Offices Today.

UT, Salt Lake City 3981 S 700 E Suite 9 Salt Lake City, UT 84107 Phone 801-265-1999 Fax 801-265-2005

CO, Colorado Springs 5067 N Academy Blvd Colorado Springs, CO 80919 Phone 719-599-7400 Fax 719-277-0640

UT, Ogden 4387 S Harrison Boulevard # C-1 Ogden, UT 84403 Phone 801-476-1999 CO, Longmont Fax 801-476-1995 1707 North Main Street # 402 Longmont, CO 80501 Phone 303-532-1882 Fax 303-772-4669 CO, Loveland 1635 Foxtrail Drive Loveland, CO 80537 Phone 970-669-7371 Fax 970-669-7443 A2Z METALWORKER

• 35 •

March/Apr2013

Pending.Home.Sales.Rose.By.4.5.Percent.In. January

Metalworking is Your Business.

Insuring Metalworkers is Sentry’s Business.

Find out how Sentry‘s expertise can help keep your metalworking facility safe, reduce your losses and hold the line on insurance premiums. For your insurance and safety needs, CALL TODAY!

1-877-373-6879 sentry.com

Property and casualty coverages and safety services are underwritten, issued and/or administered by a member of the Sentry Insurance Group, Stevens Point, WI. For a complete listing of companies, visit sentry.com. Policies, coverages, benefits and discounts are not available in all states. See policy for complete coverage details. ® Captain John Parker photo

40-3072

729898 1/18/11

S Specialty Specia ialt lty Steel Steel S Service, Inc.

“Small Sma l enough en ugh tto care, are La Large enough to serve.”

Lar We stock a large variety of the metals you need.

-Tool and Die steels -Alloys and Carbon -Aluminum Plate As well as being the authorized distrubutor of Precision Marshall and Latrobe Steel products.

We offer a variety of services, including:

-Production Cutting -Aluminum Plate Cutting -Cold Sawing - Delivering to Salt Lake, Utah, Davis, and Weber counties everyday

334 W. 800 S. Salt Lake City, Utah 84101 Toll Free 1-800-890-5950 Telephone (801) 539-8252 Fax (801) 539-8311 Email Scott@specialtysteelservice.com

A2Z METALWORKER

•

36 • March/ Apr 2013

Meg Handley writes in the US News & World Report “The Home Front” blog, “Pending home sales continued to climb in January, marking 21 months of consecutive year-over-year gains, according to” new data from the National Association of Realtors. The group said its Pending Home Sales Index was 4.5 percent higher in January compared to December. Compared to the same month a year ago, the index was 9.5 percent higher.The January reading is the highest since April 2010, just before the homebuyer tax credit was set to expire.

Reuters reports that economists surveyed by Reuters had predicted the index would increase by 1.5 percent in January.

Governors.Offer.Renewed.Focus.on.Advanced.

Manufacturing The competitiveness of U.S. businesses and their ability to hold and return manufacturing jobs to the United States will depend in part on success in advanced manufacturing, according to a report released today by the National Governors Association (NGA).

Advanced manufacturing applies to both the production of tailor-made goods aimed at specific individuals and industry users and an array of product and process innovations being adopted by manufactures that include robotics, nanotechnologies and advanced materials.

“Making” Our Future: What States Are Doing to Encourage Growth in Manufacturing through Innovation, Entrepreneurship, and Investment chronicles the progress of eight states in preparing new strategies intended to build a foundation for success in advanced manufacturing by combining workforce education and support for business innovation, university-industry partnerships and public and private sector entrepreneurship.

“Making” Our Future focuses on the results of an NGA Center for Best Practices Policy Academy where teams from eight states—California, Colorado, Connecticut, Illinois, Kansas, Massachusetts, NewYork and Pennsylvania—participated in an intensive, year-long strategic planning process to support advanced manufacturing.Together, these states represent 30 percent of total manufacturing gross domestic product, one-third of U.S. manufacturing jobs and more than 25 percent of U.S. exports of manufactured goods.

Volvos.Can.Now.Detect,.Brake.For.Cyclists Popular Science reported, “Volvo has built a system that automatically detects bicyclists. If the driver is on a collision course, the system sounds an alarm and brakes.” The system “works with a similar, pedestrianavoiding feature that Volvo began offering as an option in 2010.

A radar in the car’s grille calculates the distance between the car and objects in front of it, while a camera in the rearview mirror figures out what type of objects are in front of the car.”





   

    



 A2Z METALWORKER

• 37 •

March/Apr2013

The percentage of metalforming companies with a portion of their workforce on short time or layoff increased to 19% in February, up from 15% in January. The February figure is higher than it was one year ago when metalformers reported only 7% of workers on short time or layoff.

The Institute for Supply Management’s PM report, which includes the metalforming industry, also has recently trended upward.

Growth is expected to be modest but should continue throughout the spring unless a lack of leadership in Washington, D.C. leads to an economic shock resulting from sequestration or other issues.”

L-3.to.Demonstrate.Its.ProVision®.2.Compact.Advanced.Passenger.Screener.at.AVSEC

info@dcm-tech.com

Business.Conditions.Report.Predicts.Spike.for.

Spring According to the February 2013 Precision Metalforming Association (PMA) Business Conditions Report, metalforming companies expect a spike in business conditions during the next three months. Conducted monthly, the report is an economic indicator for manufacturing, sampling 131 metalforming companies in the United States and Canada.

The February report shows that 37% of participants predict that economic activity will improve during the next three months (up from 32% in January), 55% believe that activity will remain unchanged (up from 50% last month) and only 8% anticipate that activity will decline (down significantly from 18% in January).

Metalforming companies also expect incoming orders to strengthen during the next three months, with 50% forecasting an increase in orders (up from 44% in January), 39% expecting no change (compared to 31% last month) and 11% predicting a decrease in orders (down from 25% in January).

Average daily shipping levels rose significantly February. Forty percent of participants report that shipping levels are above levels of three months ago (up from 21% in January), 37% report that shipping levels are the same as three months ago (compared to 38% in January), and 23% report a decrease in shipping levels (down from 41% in January).

A2Z METALWORKER

•

38 •

March/Apr 2013

L-3 Communications announced that its new second-generation ProVision® 2 system, which offers Automatic Target Detection (ATD) capability with a smaller overall footprint, will be demonstrated at the AVSEC World trade show, March 5–7, in New York City. The Provision 2 is being marketed for aviation applications and is currently under review for TSA certification.The system will be displayed daily at the show in the L-3 Security & Detection Systems exhibit, booth 27-28.

The ProVision 2 is safe, efficient, image-free and now the smallest aviation screening solution with Automatic Target Detection.

The ProVision 2 offers a smaller footprint and lower height for limited-space checkpoint areas and is targeted for aviation screening applications. Its streamlined exterior design conserves space while maintaining the same interior area as earlier models. The system offers the same proven, image-free checkpoint detection and throughput as the ProVision ATD – the only TSA- and EU-approved aviation passenger screening solution with automated target recognition software. It quickly screens personnel using safe millimeter wave (MMW) technology to automatically detect concealed objects made of a wide range of materials – both metallic and non-metallic.

With more than 50,000 systems deployed and supported around the globe, L-3 Security & Detection Systems (SDS) is a leading supplier of security screening solutions. For more than 30 years, L-3 SDS has developed and manufactured cutting-edge products using advanced technologies that include 3-D computed tomography; automated, conventional and high-energy X-ray; active millimeter wave imaging; metal detection; and energetic trace explosives detection.

Applications include the screening of people, vehicles, baggage, cargo and packages for explosives, firearms, drugs, contraband and intellectual property.To learn more about L-3 SDS, please visit the company’s website at www.L-3com.com/sds.

WATER-JET CUTTING Providing...Tighter Tolerances / Minimal Machining Table Capacity of 120” Wide x 360” Long Up to 6” Thick Cutting Capacity

HIGH DEFINITION PLASMA BURNING

CONVENTIONAL PLASMA BURNING

Up to 5/8” thk Stainless & 1 1/4” thk Carbon Table Capacity of 120” Wide x 390” Long

Up to 6” Thickness Table Capacity of 132” Wide x 564” Long

Available Products...

STAINLESS: 304H, 304L, 316L, 317L, 321, 347, 904L, 2205, 2507, 254-SMO, LDX 2101 CARBON: A35, W44, 514, 516-70, 572-50, 588, API-2H-G50 ALUMINUM: 5086, 5454, 6061, 7075, 7050, 2024

Range of Sizes...

THK: 3/16” to 6” WIDTH: 48” to 120” LENGTHS: 96” to 528”

Value Added Services...

LASER CUTTING, POLISHING, GRINDING, HEAT TREATING, SAW CUTTING, FORMING, ROLLING, SHEARING, BEVELING

1-888-726-6385

samuelplate@samuel.com

www.samuel.com A2Z METALWORKER

• 39 •

March/Apr 2013

In the technology developed by Moskovits and his team, it is not semiconductor materials that provide the electrons and venue for the conversion of solar energy, but nanostructured metals -- a “forest” of gold nanorods, to be specific.

For this experiment, gold nanorods were capped with a layer of crystalline titanium dioxide decorated with platinum nanoparticles, and set in water. A cobalt-based oxidation catalyst was deposited on the lower portion of the array.

“When nanostructures, such as nanorods, of certain metals are exposed to visible light, the conduction electrons of the metal can be caused to oscillate collectively, absorbing a great deal of the light,” said Moskovits. “This excitation is called a surface plasmon.”

TCI Machine-Ready Blanks Can Help.

Increase throughput by 25% or more with TCI Machine-Ready Blanks. With one P.O., eliminate grinding / squaring operations and outside processing. Use the time you save for more productive use of your CNC equipment – adding to your bottom line.

• Ready to load directly into your CNC machining centers • Guaranteed tolerances as close as +/-.0005” dimensionally and as close as .0002” flatness, squareness and parallelism – deburred and cleaned • Aluminum, stainless, alloy steels and more • ISO 9001 and AS9100 registered Call today, or visit us on the Web to Request a quote Good Parts. On Time. Period. and sign up for a FREE Webinar, How to Increase Throughput and Profits, hosted by Modern Machine Shop.

Value Added Materials Distributor

(800) 234-5613 • www.tciprecision.com Authorized Distributor MEMBER

ISO 9001 & AS 9100

© 2012 TCI Precision Metals. All rights reserved.

Scientists. Develop. a.Whole. New.Way. of. Harvesting. Energy. from.the.Sun A new method of harvesting the Sun’s energy is emerging, thanks to scientists at UC Santa Barbara’s Departments of Chemistry, Chemical Engineering, and Materials. Though still in its infancy, the research promises to convert sunlight into energy using a process based on metals that are more robust than many of the semiconductors used in conventional methods.

“It is the first radically new and potentially workable alternative to semiconductor-based solar conversion devices to be developed in the past 70 years or so,” said Martin Moskovits, professor of chemistry at UCSB. A2Z METALWORKER

•

40 • March/ Apr 2013

As the “hot” electrons in these plasmonic waves are excited by light particles, some travel up the nanorod, through a filter layer of crystalline titanium dioxide, and are captured by platinum particles. This causes the reaction that splits hydrogen ions from the bond that forms water. Meanwhile, the holes left behind by the excited electrons head toward the cobalt-based catalyst on the lower part of the rod to form oxygen.

According to the study, hydrogen production was clearly observable after about two hours. Additionally, the nanorods were not subject to the photocorrosion that often causes traditional semiconductor material to fail in minutes.

The plasmonic method of splitting water is currently less efficient and more costly than conventional photoprocesses, but if the last century of photovoltaic technology has shown anything, it is that continued research will improve on the cost and efficiency of this new method -- and likely in far less time than it took for the semiconductor-based technology, said Moskovits.

Research in this study was also performed by postdoctoral researchers Syed Mubeen and Joun Lee; grad student Nirala Singh; materials engineer Stephan Kraemer; and chemistry professor Galen Stucky.

A2Z METALWORKER

• 41 •

March/Apr2013

Lockheed.Wins.$334.Million.F-35.Contract.

Before.U.S..Cuts Lockheed Martin Corp. received a $333.7 million U.S. downpayment to buy initial parts, components and materials for an eighth batch of F-35 jets, as the Pentagon locked in the funds hours before automatic budget cuts begin.

This action exempts the funds from the across-the- board spending reductions known as sequestration that take effect because Pentagon officials have said contracts with obligated dollars won’t be cut or terminated.The eighth contract calls for 35 jets, including four aircraft for the U.K. and two for Norway, according to a Pentagon statement.

The agreement by the Pentagon and Lockheed underscores their shared commitment to continued development of the costliest U.S. weapon system. The Department of Defense sheltered the F-35 funding from spending cuts even as officials warn they will have to impose furloughs on civilian workers and reduce troop training at the risk of combat readiness.

Supplier ‘Stability’ Lockheed, the world’s largest defense contractor, said in a statement that it “will continue to drive down costs” for the F-35.

“This award provides our supplier base the stability needed to properly execute on our future production commitments,” the Bethesda, Maryland-based company said. “We will continue to drive down costs for these future aircraft.”

laser cutting welding forming tube bending

Cost estimates for the F-35, known as the Joint Strike Fighter, have ballooned to $395.7 billion, a 70 percent increase since 2001. Pentagon officials have grown increasingly critical in pressing Lockheed to reduce costs.

The Pentagon’s top weapons buyer, Frank Kendall, faulted the company in November for being too “focused on short-term business goals” and not “focused more on execution of program and successful delivery of the product.”

howellprecisionaz.com

Mention Code

“a2z”

and reCeive

5% off your next purChase order

623.582.4776 A2Z METALWORKER

•

42 • March/ Apr 2013

This latest contract action is one of several such moves that the Pentagon has taken to shelter F-35 funding before automatic cuts were to be triggered. The previous actions came before a Jan. 1 deadline for sequestration that was averted by a last-minute deal to delay the cuts for two months.

Previous Moves On Dec. 14, Lockheed received a Pentagon contract guaranteeing a final installment of about $127.7 million for the fifth production lot of F-35 fighters, bringing the total value to about $3.8 billion.

On Dec. 28, the Pentagon awarded the company a contract for the sixth installment of F-35s that can’t exceed $3.67 billion. The “undefinitized contract action” set a threshold target and obligates an unspecified amount to begin assembly of additional aircraft.

Last year, Lockheed received initial funding for a seventh production contract similar to yesterday’s award.

The F-35 fleet was cleared to resume flight operations, according to the Pentagon, ending a suspension ordered Feb. 22 after the discovery of a cracked engine blade in one of the stealth jets.

The affected engine had been subjected to “prolonged exposure to high levels of heat and other operational stresses” in testing, the Pentagon F-35 office said in a statement.

Inspections of other F-35 fighter jets didn’t find any other “cracks or signs of similar engine stress,” and no redesign will be needed for the engines built by United Technologies Corp. (UTX)’s Pratt & Whitney unit, according to the statement.

Pratt & Whitney, which makes the plane’s engine, had recommended that the Pentagon lift the suspension.

ATK.Awarded.$12.Million.

Contract.to.Deliver.30mm.

MK266.Ammunition.to.the.

U.S..Navy ATK announced the award of a first-year, $12 million contract to deliver 30mm MK266 ammunition to the U.S. Navy.

This is a single award, firm-fixed-price, five-year indefinite delivery indefinite quantity (IDIQ) contract for 30mm x 173mm, MK266 High Explosive Incendiary with Trace Cartridges in MK15 Linked Belts. This multiyear contract has a potential value of $41 million should all possible follow on contracts be awarded through 2018.

The ammunition is used with the MK46 Mod 2 Gun Weapon System, which is composed of ATK’s MK44, 30mm Bushmaster automatic cannon. This weapon system arms the U.S. Navy’s San Antonio class Landing Platform Dock (LPD) ships and Littoral Combat Ships (LCS).

“We take great pride in developing and producing ammunition that provides superior performance and reliability,” said Bruce DeWitt,Vice President and General Manager. “Our medium-caliber expertise includes a full spectrum of highly effective and accurate tactical ammunition for air, ground and sea platforms as well as cost-effective training ammunition that provides a realistic experience for the warfighter.”

The MK266 is a modification to the PGU-13 High Explosive Incendiary 30mm round, accomplished by adding a tracer and ATK’s Low Drag Fuze.The non-self-destruct, Low Drag Fuze, produced exclusively by ATK, provides superior performance at extended range. The MK266 rounds may also be used for any cannon that fires 30mm x 173mm ammunition.

Program management for the MK266 is headquartered at ATK’s Defense Group facility located in Plymouth, Minn., while ammunition production activities take place at Allegany Ballistics Laboratory in Rocket Center,W.Va. and New River Energetics in Radford,Va. Firstyear production deliveries are scheduled to begin in 2014.

The contract was awarded through the Project Manager Maneuver Ammunition Systems as the Single Manager for Conventional Ammunition, which is responsible for the procurement of ammunition for all the Armed Services.

A2Z METALWORKER

• 43 •

March/Apr2013

Delta. 2. rocket. gets. another. launch. order. from.NASA

INTRODUCING...“NEW” PRODUCTS FROM THE NAME YOU CAN TRUST...

IC R O OO

®

super carbide tools CO EFFE ST C TOOLITIVE NG

HIGH QUALITY...ULTRA PRECISION...

QUICK-CHANGE Q UICK K CHA ANGE O OLING SYS SYSTEM YSTEM Y YS S TOO TOOLING

NEW BORE GROOVE FACE GROOVE PROFILE THREAD

QUALITY...Through QUALITY...

ALITY Through ALITY...

Manufacturing Excellence!

i cr o QuIk

®

QUICK CHANGE TOOLING

Unique “3 POINT” Locking/Locating Tooling System Engineered for Maximum Tool Rigidity and Centerline Repeatability within +.0005” from Tool to Tool!

Reduce Machine...Setup, Downtime, Tooling Costs, Tooling Inventories while Boosting Productivity!

Tools Manufactured with the... Exclusive...

MICRO 100 Proprietary Process!

PROUDLY MADE IN THE

MICRO 100 TOOL CORPORATION 1410 E. Pine Avenue Meridian, ID. 83642

800-421-8065

USA

208-888-7310

www.micro100.com

Contact your local Authorized Micro 100 Distributor or Sales Representative today for more details!

Max Steinbach Micro 100 Tool Corporation Northwest Sales Manager

Part Density.

Phone: Fax: Email:

800-421-8065 208-888-2106 msteinbach@micro 100.com

Need we say more?

NASA has boosted its future plans using the venerable Delta 2 rocket, announcing it would buy a fourth vehicle for upcoming Earth science research projects.

The United Launch Alliance vehicle has flown 151 times since debuting on Valentine’s Day 1989 and amassed a reliability rating of 98.7 percent. The track record includes only one outright failure and a remarkable string of 96 consecutive successful launches since 1997. But after the U.S. Air Force transitioned its launches of new Global Positioning System satellites to the Delta 4 and Atlas 5 rockets, the Delta 2 lost its anchor customer.

For a time, it appeared the Delta 2 would fade into history after carrying a climate and weather observatory into orbit for NASA in October 2011.But NASA breathed new life into the rocket last July, purchasing three future flights from an inventory of five remaining Delta 2s.

This latest news buys a fourth of the five, leaving the elements of just one unsold rocket remaining in the stockpile.This latest deal will carry the agency’s second Ice, Cloud and Land Elevation Satellite into orbit from Vandenberg Air Force Base in California. ICESat 2 is slated for liftoff from Space Launch Complex 2-West in July 2016.

NASA’s total cost to launch ICESat 2 is $96.6 million, including the rocket, payload processing, integrated services, telemetry relay fees, reimbursables and other launch support requirements.

NASA has used the Delta 2 rocket on 50 launches to date, most notably to send the Spirit and Opportunity rovers, the Odyssey orbiter and Phoenix lander to Mars, plus the Stardust and Genesis sample-return spacecraft, MESSENGER to orbit Mercury and the Spitzer infrared space telescope.

The deal will begin launching in July 2014 with the replacement Orbiting Carbon Observatory, becoming NASA’s environmental satellite dedicated to mapping atmospheric carbon dioxide and man’s impact on Earth.

Next will be SMAP, the Soil Moisture Active Passive satellite, set to launch in October 2014.

ICESat 2 follows in July 2016 to continue work begun by the program’s original spacecraft, which has since been retired after a sevenyear mission that monitored the melting Arctic polar ice cap.

Part Number: G12146D221M

Learn more at 5axisfixtures.com 1(858)-505-0432 A2Z METALWORKER

•

sales@5axisfixtures.com

44 • March/ Apr 2013

The Delta 2 will put ICESat 2 into a 373-mile polar orbit where the craft’s multi-beam micropulse laser altimeter will provide precise global ice topography measurements of polar ice sheets and glaciers, study ice thickness and examine sea surface and vegetation heights.

Then comes JPSS 1, the first civilian weather observatory in the Joint Polar Satellite System launching in November 2016. The craft will provide the ingredients needed for long-term weather outlooks.

May 1-2, 2013 Colorado Convention Center 700 14th St. Denver , CO 80202 Hall B

Come to the AmCon Denver Show and.....

Thursday, May 2 9:30 am - 3:00 pm

See hundreds of manufacturing processes under one roof Learn about the latest in cutting-edge technologies & processes Compare your current suppliers' pricing, quality and lead time Get expert advice on difficult design & production problems Attend FREE SEMINARS on a variety of manufacturing topics Admission is FREE and it's easy to register at www.amconshows.com

Register today at: www.amconshows.com

FREE ADMISSION • FREE PARKING • FREE SEMINARS Over 30% New Exhibits!

Show Hours: Wednesday, May 1 9:30 am - 3:30 pm

A2Z METALWORKER

• 45 •

March/Apr2013

Small.and.Midsized.Manufacturers.Project.

Strong.Revenues.for.2013 Prime Advantage, the leading buying consortium for midsized manufacturers, announced the findings of its eleventh semi-annual Group Outlook Survey, revealing financial projections and top concerns of its member companies for 2013. The Group Outlook (GO Survey) results find manufacturers optimistic about revenues, and planning to retain or grow their workforce.

Summary of Findings · Sixty-eight percent of respondents expect revenues to increase in 2013 · Eighty-seven percent of companies expect capital expenditures to grow or remain constant in 2013, with 39 percent planning to spend more than 2012 levels · Forty-three percent of companies plan to hire more employees in 2013 and 52 percent plan to maintain current employment levels · The cost of raw materials is a concern and is among top cost pressures for 90 percent of manufacturers Howard Precision Machined Products (JW Howard Inc.) Howard Precision Machine (JWHoward Inc.) 776 West Honda Park Drive,Parts Bluffdale, Utah 84065 776 West Honda park Drive, Bluffdale, Utah 84065 www.HowardPMP.com www.HowardPMP.com • info@howardpmp.com info@howardpmp.com 801-619-9850

“Any owner in today’s climate needs the strength and support of a strong business organization.” Ron Overton, Overton Industries

Your Membership Includes:

 Market Conditions Reports And Purchasing Fairs  Benchmarking Reports  Seminars With Cutting Edge Concepts  Advocacy in Washington, D.C.  Networking Events  Next Generation Workforce Development “Best Little Trade Association in the U.S.!” INC. Magazine

“Membership Doesn’t Cost, It Pays” MA NU FAC TU R ING COLOR A DO ’S F UTURE

Find Out More At An Upcoming Event!

720-248-8777 • maureen@rmtma.org • www.rmtma.org Option 01

Anticipating strong revenue and capital spending - Most small and midsized manufacturers expect to beat strong revenues of 2012, with 68 percent of respondents anticipating an increase in sales in 2013.

New product launches are the main reason for expected revenue increases, cited by 61 percent, followed by an expected increase in overall customer demand, cited by 57 percent.

Capital expenditure planning remains healthy, as in the previous two years, with 39 percent of respondents planning an increase from 2012 levels. The 1H2012 GO Survey saw 88 percent projecting spending increases over the previous year, and the 2H2012 GO Survey saw 48 percent projecting spending increases over the previous 12-month period.

Employment continues to grow - Manufacturers’ hiring plans remain in expansion mode, with 43 percent planning to hire more workers this year. Although this number is slightly down compared with 2012, when 56 percent of respondents planned hiring, it remains significantly above expectations in 2010, when only 24 percent of companies were hiring.

Top Concerns: raw materials, purchasing processes and forecast accuracy The top concern of 2013, the cost of raw materials, is also a leading cost pressure concern. More than 90 percent of respondents included raw materials in their top three cost pressure concerns and 42 percent cited this concern in the leading position. However, it is encouraging that this seems to be declining, relative to recent surveys.The 1H2012 GO Survey saw 55 percent indicate that raw materials was the top cost pressure concern, and it was cited as the top cost pressure concern by 76 percent in the 1H2012 GO Survey.

MA NUF A CT URI NG AM ER IC A’S FU TU R E

www.ntma.org

A2Z METALWORKER

•

www.gonrl.org www.themfgmeeting.com

46 • March/ Apr 2013

Healthcare costs moved back into second place among top cost pres-

sure concerns, with 57 percent of respondents including it in the top three.The 1H2012 GO Survey had healthcare costs as the third-greatest cost concern (49 percent). And in 2011, healthcare costs were cited as the fourth-greatest concern among small and midsized manufacturers.

Top qualiTy cuSTomeR ReviewS foR oveR 3,500 Band SawS

Nearshoring is here - Companies are seeking the benefits of near-shoring.

In the past twelve months, more than one-in-five respondents have brought international sourcing closer to United States.These results are similar to the Grant Thornton Study on Nearshoring, where 25 percent of respondents indicated they brought sourcing closer to the U.S. More than 70 percent of respondents have increased material and service purchases from American suppliers and service providers. Mexico is the second choice for sourcing, with nearly 28 percent of respondents moving sourcing to that region. The most frequently cited benefits that manufacturers hope to see in nearshoring are shorter lead times, as indicated by 67 percent of respondents, and lower inventories (49 percent).

Among other benefits, companies cited better supply chain control (40 percent) and better overall communication (39 percent).

“We are encouraged to see that our Members expect to see growth in 2013, after a very strong 2012 for most,” said Louise O’Sullivan, founder, president and CEO of Prime Advantage. “As they focus on profitability and margins, we look forward to partnering with both Members and Endorsed Suppliers to fuel the bottom line, reflecting Total Cost of Ownership, along with the top line, greater sales and market share.”

Methodology: In January 2013, Prime Advantage surveyed executives and purchasing professionals that represent durable goods manufacturing firms, with annual revenues ranging between $10 million and $4 billion, of which the majority ranges between $20 million and $500 million.The survey received a 16 percent response rate from 490 top professionals representing U.S.-based manufacturers in more than 25 different industries, including commercial foodservice, packaging, truck and trailer, material handling, food processing and construction. Prime Advantage has polled its membership for their impressions of current economic conditions on a semi-annual basis since February 2008.

BandSawReviews.com is all about great reviews that are 100% customer-generated. This way, you always know what bandsaw is right for you and your business!

• Search for a bandsaw • Read the reviews • Write your own review

www.BandSawReviewS.com Watkins Tool And Supply, LLC 303.371.2298 boydw@watkinstooling.com 3851 Revere Street Denver, CO 80239

QUALITY TOOLING SINCE 1976

Specializing In:

To request a copy of the Prime Advantage 2013 1H Group Outlook Survey visit:www.primeadvantage.com/groupoutlook/. *Graphics of survey data available upon request.

Engineering & Design Tool & Die Plastic Injection Molds Die-Cast Dies

In.The.Medical.Device.Business,.You.Need.Every.Advantage..Maybe.This.Is.A.Good.Time.To. Introduce.Utah When you’re in an industry that’s subject to dramatic change, it’s good to know there are safe havens, where operating costs are low and government is business friendly.

Look to Utah - Forbes #1 State for Business three years running - to help with your expansion plans. We bring predictability, quality of life, up-to-date infrastructure, an educated workforce, and other advantages to fuel your company’s long-term growth. Call 801.538.8769 to learn more about opportunities in Utah.

MANUFACTURERS REP WANTED We Are Growing And Looking For A Manufacturers Representative To Sell Our Services. Contact Boyd Williford at 303.371.2298 or boydw@watkinstooling.com A2Z METALWORKER

•

88 • May/June 2012

• 47 •

March/Apr2013

Calibrations,

A2Z METALWORKER

BAE. to. advance. micro-robotics. platforms. development.for.US.Army 2936 South Zuni Street • Englewood, Colorado 80110 303-761-3000 • sales@rmsawblades.com Order Custom Welded Band Saw Blades in Denver • Over 30 years experience • State of the art, Ideal Computerized Welder • Offering a wide range of blade stock from many different manufacturers • Complete line of products for production cutting • Expedited orders are no extra charge.

BAE Systems has received a contract to continue serving as industrial lead for the US Army Research Laboratory’s (ARL) Micro Autonomous Systems and Technology (MAST) Collaborative Technology Alliance for the next five years.

Under the $43m cooperative agreement extension, the company will continue joint research with the MAST Alliance’s team of scientists from the army, academia and industry to help accelerate development of bio-inspired micro-robotics systems for US ground forces.

BAE Systems MAST strategic development manager Bill Devine said: “The technologies being developed under MAST will support products that extend soldiers’ capabilities, while keeping them out of harm’s way.”

Saws Band Saw Blades Files Magnets Power Tool Accessories Hole Saws Port-A-Bands Saw Blades Metal Cutting Fluids

Our goal is to ship out all of our orders “same day”.

We are proud to offer the best “on time delivery” at the best price anywhere.

Work specifically includes research, development and integration of micro-scale aeromechanics and ambulation, propulsion,Saws sensing, auBand Blades tonomy, communications, navigation, and control, as well Saw as microscale Files integration among others facilitating production of several different Magnets mission-capable robotic platforms.

Power Tool Accessories Hole Saws Micro-robots are expected to be used by dismounted troops for remote Port-A-Bands surveillance missions within complex urban environments terrain.

Saw and Blades Metal Cutting Fluids

Primary research labs supporting BAE in the second phase include the University of Maryland, University of Michigan, University of Pennsylvania and the Nasa Jet Propulsion Lab. Initiated in 2008, the MAST programme features two main components, a fundamental research programme, which is focused on microsystems mechanics, processing for autonomous operation, microelectronics and integration; with the second being a technology transition phase.

Other participants include University of California, California Institute of Technology, Georgia Institute of Technology, Harvard University, Massachusetts Institute of Technology, North Carolina A&T and the University of New Mexico.

Economy.Expected.To.Continue.Growing.Despite.Spending.Cuts,.Payroll.Tax.Hike USA Today reported, “After sputtering for several years, the US economic engine finally seems poised to fire on all cylinders,” if “only the federal government can patch up that unsightly pothole it created about a mile up the road.” For the third year in a row, USA Today adds, “solid first-quarter job growth and budding hopes for a stronger recovery are tempered by the specter of a midyear swoon.”

This time, the momentum is threatened by “January’s payroll tax increase and across-the-board federal spending cuts that will likely affect the economy in a couple of months,” but “this time is different, experts say, because the underpinnings of the economy are sturdier.”

52• •March/ July/Aug 2012 48 Apr 2013

A2Z METALWORKER • A2Z METALWORKER •

Buyer’s Guide & Card Gallery Equipment and Services

Troy R. Kattenhorn, CMTSE Sales Manager 6855 West 116th Ave 0 Broomfield, CO 80020 303-466-3777 o Pax 303-466-19790 Cell: 303-437-6357 Email: troy@foothillsmachinery.com 0 www.foothillsmachinery.com

Tornos US 840 Parkview Boulevard Lombard, IL 60148 Phone 630 812 2040 Fax 630 812 2039

ACCESSORIES AIT______________ 800-321-3195 Blackhawk_Industrial_ ___ 303-744-1205 Bytebox____________ 888-Bytebox Desert_EDM_Sales_____ 480-816-6300 Abrasive Products Blackhawk_Industrial_ ___ 303-744-1205 Shop_Tools,_Inc._ ______ 303-375-9190

Ballscrews Fadal_CNC__________ 208-855-9426 Fadal Bandsaw Blades Roentgen_USA________ 847-787-0135 Roentgen Barfeeder Accessories Trusty-Cook_ ________ 877-240-2462 Trusty-Cook Boring Bars AIT______________ 800-321-3195 Marshall_Tool_&_Supply___ 602-269-6295 Micro_100_ _________ 208-888-7310 Seco_Tools_Inc.________ 248-528-5960 Chucks Marshall_Tool_&_Supply___ 602-269-6295 Seco_Tools_Inc.________ 248-528-5960 Cleanroom Bytebox Bytebox____________ 888-Bytebox Shop Shop_Tools,_Inc._ ______ 303-375-9190 CNC Lathe Accessories Trusty-Cook Trusty-Cook_ ________ 877-240-2462 CNC Spindle Liners Trusty-Cook Trusty-Cook_ ________ 877-240-2462

ROBERT SERRANO Regional Sales Manager West California Office Phone 951 695 0342 951 695 0346 Fax Mobile 951 240 0818 E-Mail serrano.r@tornos.com

Coolant Systems AIT______________ 800-321-3195 Blackhawk_Industrial___ 303-744-1205 Blaser____________ 801-722-4095 DCM_Tech___________ 800-533-5339 BHangsterfer’s_ ______ 316-640-2462 Hangsterfer’s_ _______ 760-580-1357 Marshall_Tool_&_Supply___ 602-269-6295 Qualichem,_Inc._ ______ 480-320-0308 Star_Metal_Fluids_ _____ 800-367-9966 Cutting Fluids & Oils AIT______________ 800-321-3195 Blackhawk_Industrial___ 303-744-1205 Blaser____________ 801-722-4095

Castrol____________ 800-894-7773 Christensen_Oil_ ______ 800-654-0438 Hangsterfer’s_ _______ 316-640-2462 Hangsterfer’s_ _______ 760-580-1357 Marshall_Tool_&_Supply___ 602-269-6295 Qualichem,_Inc._ ______ 480-320-0308 Star_Metal_Fluids_ _____ 800-367-9966

A2Z METALWORKER

• 49 •

March/Apr2013 March/Apr 2013

Doug Klein, ASQ CQE 5730 E. Leith Lane Scottsdale, AZ 85254 480-626-8131 Fax 480-626-2101 doug@klontech.com www.klontech.com

Protective Computer Enclosures for the Industrial Environment

www.bytebox.com sales@bytebox.com 888-bytebox

DAVID LADZICK MANAGER DAVID LADZICK NORTHWEST REGION MANAGER

NORTHWEST REGION

SECO TOOLS INC.,

8215 SW TUALATIN-SHERWOOD ROAD, SUITE 200 TUALATIN, OR 97062 503-267-4805 8215CELL: SW TUALATIN-SHERWOOD ROAD, SUITE 200 TUALATIN, OR 97062 OFFICE: 248-528-5990 FAX: 503-404-2440 CELL: 503-267-4805 E-MAIL: dladzick@secotools.com OFFICE: 248-528-5990 FAX: 503-404-2440 www.secotools.com E-MAIL: dladzick@secotools.com

SECO TOOLS INC.,

www.secotools.com

Cutting Tools AIT______________ 800-321-3195 Almar_Tools_ ________ 503-255-2763 Blackhawk_Industrial_ ___ 303-744-1205 Horizon_Carbide_Tool___480-968-0957 Marshall_Tool_&_Supply___ 602-269-6295 Micro_100_ _________ 208-888-7310 Sandvik_ __________ 801-362-3618 Seco_Tools_Inc.________ 248-528-5960 Shop_Tools,_Inc._ ______ 303-375-9190 Dielectric Fluid Hangsterfer’s_ _______ 316-640-2462 Hangsterfer’s_ _______ 760-580-1357 Drills Sandvik_ __________ 801-362-3618 Seco_Tools_Inc.________ 248-528-5960 Dust Collectors, Filtration Equip.

Blaser____________ 801-722-4095 A2Z METALWORKER

•

50 •

March/Apr 2013

Bytebox____________ 888-Bytebox Castrol__ __________ 800-894-7773 Christensen_Oil_ ______ 800-654-0438 DCM_Tech___________ 800-533-5339 Star_Metal_Fluids_ _____ 800-367-9966 EDM Materials & Supplies Blaser____________ 801-722-4095 Castrol____________ 800-894-7773 Christensen_Oil_ ______ 800-654-0438 Desert_EDM_Sales_____ 480-816-6300 EDM_Network_ _______ 480-836-1782 EDM_Perform._Access.____ 800-336-2946 Global_EDM__Supply_____ 480-836-8330 Star_Metal_Fluids_ _____ 800-367-9966 EDM: Dielectric Systems /Filtration Desert_EDM_Sales_____ 480-816-6300

End Mills Almar_Tools_ ________ 503-255-2763 Marshall_Tool_&_Supply___ 602-269-6295 Micro_100_ _________ 208-888-7310 Sandvik_ __________ 801-362-3618 Electronics Fadal_CNC__________ 208-855-9426 Fasteners Self_Clinch_Direct_ ____ 801-746-2689 Filtration Equipment Desert_EDM_Sales_____ 480-816-6300 Fixtures/Fixturing 5th_Axis_Fixtures_______ 858-505-0432 Gaging Blackhawk_Industrial_ ___ 303-744-1205 Shop_Tools,_Inc._ ______ 303-375-9190 Knives: Replacement Superior_Grinding______ 801-487-9700

Laser Accessories Castrol____________ 800-894-7773 Christensen_Oil_ ______ 800-654-0438 Laser Marking Equipment Total_Quality_Systems_Inc.__ 480-377-6422 Liquid Penetrant Team_Industrial_Services___ 801-397-2202 Team_Industrial_Services___ 602-269-7868 Lubricants / Systems Blaser____________ 801-722-4095 Castrol____________ 800-894-7773 Christensen_Oil_ ______ 800-654-0438 Hangsterfer’s_ _______ 316-640-2462 Hangsterfer’s_ _______ 760-580-1357 Marshall_Tool_&_Supply___ 602-269-6295 Qualichem,_Inc._ ______ 480-320-0308 Star_Metal_Fluids_ _____ 800-367-9966

www.kdcapital.com

65 South Cottonwood Street (300 W) 6577 Salt Lake City, Utah 84107 Sa

Gage-Lab Products G

922-1674

Dimensional Gaging Specialists

Tim Zimmerman

tz@gagelabproducts.com

phone (801)716-2972 fax

(8 (801)716-2975

c cell

(8 (801)918-8798

www.gagelabproducts.com

TECHNOLOGY THAT WORKS

Machine Tool Cool. Filtration Blaser____________ 801-722-4095 Castrol____________ 800-894-7773 Christensen_Oil_ ______ 800-654-0438 Hangsterfer’s_ _______ 316-640-2462 Hangsterfer’s_ _______ 760-580-1357 Marshall_Tool_&_Supply___ 602-269-6295 Star_Metal_Fluids_ _____ 800-367-9966 Motors Fadal_CNC__________ 208-855-9426 Parts Washing Equipment Blaser____________ 801-722-4095 Star_Metal_Fluids_ _____ 800-367-9966 Revolvers Fadal_CNC__________ 208-855-9426 Solvents /Degreasing Agents Blaser____________ 801-722-4095 Castrol____________ 800-894-7773 A2Z METALWORKER

•

51 •

Hangsterfer’s_ angsterfer’s _______ 316-640-2462 Hangsterfer’s_ _______ 760-580-1357 Star_Metal_Fluids_ _____ 800-367-9966 Spindles Fadal_CNC__________ 208-855-9426 GMN_USA_ _________ 800-686-1679 Setco_Spindles_&_Slides_ __ 866-362-0699 Thread Mills Micro_100_ _________ 208-888-7310 Sandvik_ __________ 801-362-3618 Tooling Systems AIT______________ 800-321-3195 Almar_Tools_ ________ 503-255-2763 Blackhawk_Industrial_ ___ 303-744-1205 Micro_100_ _________ 208-888-7310 Sandvik_ __________ 801-362-3618 Seco_Tools_Inc.________ 248-528-5960

March/Apr 2013

Vices and Vice Jaws 5th_Axis_Fixtures_______ 858-505-0432 Desert_EDM_Sales_ _____ 480-816-6300 Waycovers Fadal_CNC__________ 208-855-9426 Work Holding 5th_Axis_Fixtures_______ 858-505-0432 AIT______________ 800-321-3195 CALIBRATION SERVICES Advanced_Coord._Tech_____ 303-469-6161 Klontech_Industrial_Sales_ _ 480-948-1871 Total_Qual._Syst._______ 480-377-6422 GRAPHITE FOR EDM Aerospace Toyo_Tanso_USA_ ______ 630-248-3885 Fine Detail Electrodes Toyo_Tanso_USA_ ______ 630-248-3885

Forging Dies Toyo_Tanso_USA_ ______ 630-248-3885 Carbide Burning Toyo_Tanso_USA_ ______ 630-248-3885 Threaded Electrodes Toyo_Tanso_USA_ ______ 630-248-3885 GRINDING Grinding Machines DCM_Tech__________ 800-533-5339 Blackhawk_Industrial___ 303-744-1205 Moncktons_Mach_Tools_ _ 303-571-4933 Triad_Machine_______ 303-424-0268 Aircraft brake rotor DCM_Tech__________ 800-533-5339 Grinders, Rotary Silicon & Quartz DCM_Tech__________ 800-533-5339 A2Z METALWORKER

• 51 •

March/Apr 2013

11042 N. 24th Ave. Suite 101 Phoenix, AZ 85029

5thAXIS FIXTURES

Innovative solutions for all 3, 4, and 5 axis machines.

Mathew Evans Director of Sales and Marketing

7140 Engineer Rd. San Diego, CA 92111 www.5axisfixtures.com sales@5axisfixtures.com

Automatic Barfeeds of all Types

(858)-505-0432

An ISO 9001 Company

VP/General Manager

Jeff Klimowicz Senior Sales Engineer Southwest Region: AZ, UT, NV, CO, ID All Products Proudly Made in the USA

Manual Lathes & Mills AME,_Inc._ ________ 303-922-9266 Pedestals for Grinders Midaco___________847-593-8420 Sawing Machines AIT______________ 800-321-3195 Blackhawk_Industrial___ 303-744-1205 Jorgensen_Machine_Tools_ 800-952-0151 Moncktons_Mach_Tools_ _ 303-571-4933 Rocky_Mountain_Saw_Blades__303-761-3000_ Saw Replacement Parts Rocky_Mountain_Saw_Blades__303-761-3000 _ Tool Grinders Punch & Die DCM_Tech__________ 800-533-5339 _INSPECTION EQUIP Advanced_Coord._Tech_____ 303-469-6161 Gage_Lab_Products______ 801-716-2972 Klontech_Indust._Sales____ 480-948-1871 OGP_ _ ___________ 480-889-9056 Total_Qual._Syst._______ 480-377-6422 CMM Probes Datum_Inspection_ _____ 602-997-1340 Gage_Lab_Products______ 801-716-2972 A2Z METALWORKER

•

52 •

Klontech_Industrial_Sales_ _ 480-948-1871 OGP_ ___________ 480-889-9056 Total_Quality_Systems_Inc.__ 480-377-6422 Coordinate Measuring Mach.

Advanced_Coordinate_Tech__ 623-780-4137 Datum_Inspection_ _____ 602-997-1340 Klontech_Industrial_Sales_ _ 480-948-1871 Moncktons_Mach_Tools_ _ 303-571-4933 OGP_ ___________ 480-889-9056 Total_Quality_Systems_Inc.__ 480-377-6422 Gauging Equipment Advanced_Coord._Tech__ __ 303-469-6161 Gage_Lab_Products______ 801-716-2972 Klontech_Industrial_Sales_ 480-948-1871 OGP_ ___________ 480-889-9056 Total_Quality_Systems_Inc.__ 480-377-6422 Low Temp Instrumentation High_Precision_Devices_ _ 303-447-2558 Metrology Instruments Advanced_Coord._Tech__ __ 303-469-6161 Datum_Inspection_____ 602-997-1340 Gage_Lab_Products______ 801-716-2972 Klontech_Industrial_Sales_ 480-948-1871

March/Apr 2013

Mobile: 480‐320‐0308 jklimowicz@qualichem.com www.qualichem.com

OGP______ __________ 480-889-9056 Total_Quality_Systems_Inc.__ 480-377-6422 Optical Comparators Advanced_Coord._Tech__ __ 303-469-6161 Datum_Inspection_____ 602-997-1340 Gage_Lab_Products______ 801-716-2972 Klontech_Industrial_Sales_ 480-948-1871 OGP_ ___________ 480-889-9056 Total_Quality_Systems_Inc.__ 480-377-6422 Particle Inspection Mach DCM_Tech__________ 800-533-5339 Video Measuring Systems Advanced_Coordinate_Tech_ ___ 623-780-4137 Gage_Lab_Products______ 801-716-2972 Klontech_Industrial_Sales_ 480-948-1871 Total_Quality_Systems_Inc.__ 480-377-6422 HARDWARE Horizon_Carbide_Tool___480-968-0957 Metal_Supermarkets_ __ 801-972-2441 Utah_Metal_Works,_Inc.__ 801-364-5679 METALS & MATERIALS AZ_Tool_Steel_LLC_ _____ 480-784-1600 Coastal_Metals_ ______ 800-811-7466

Erickson_Metals______877-543-6061 Metal_Supermarkets_ __ 801-972-2441 Ryerson__________303-227-6310 Samuel,_Son_&_Co._ __ 303-422-8282 TCI_Precision_Metals_ __ 800-234-5613 United_Performance_Metals_888-282-3292 Western_States_Metals_ _801-978-0562 Alloys: Corrosion Resistant Haynes_Intl__________ 713-937-7597 United_Performance_Metals__888-282-3292 Alloys: High Temperature Haynes_Intl_ ________713-937-7597 United_Performance_Metals__888-282-3292 Alloys: Nichel & Cobalt Haynes_Intl_ ________713-937-7597 United_Performance_Metals__888-282-3292 Aluminum TCI_Precision_Metals_ __ 800-234-5613 Brass Coastal_Metals_ ______ 800-811-7466 Ryerson___________303-227-6310 United_Performance_Metals_ 888-282-3292 Bronze Coastal_Metals_ ______ 800-811-7466 A2Z METALWORKER

• 52 •

March/Apr 2013

Carbon Coastal_Metals_ ______ 800-811-7466 Ryerson___________303-227-6310 Metals: Bar & Plate AZ_Tool_Steel_LLC_ _____480-784-1600 Coastal_Metals_ ______ 800-811-7466 Ryerson___________303-227-6310 Mold Steel AZ_Tool_Steel_LLC_ _____480-784-1600 Nickel Alloys AZ_Tool_Steel_LLC_ _____480-784-1600 Marzee_Inc.________602-269-5801 Ryerson__________303-227-6310 United_Performance_Metals__888-282-3292 _Plate-Precision Saw Cut Erickson_Metals______877-543-6061 Pre-Honed Tube Western_States_Metals_ _801-978-0562 Rubber Marzee_Inc.________602-269-5801 Sheet Metal Self_Clinch_Direct_ ____ 801-746-2689 Stainless Steel AZ_Tool_Steel_LLC_ ____ 480-784-1600 Coastal_Metals_ ______ 800-811-7466 Metal_Supermarkets_ __ 801-972-2441 Ryerson__________303-227-6310 Samuel,_Son_&_CO.____ 303-422-8282 TCI_Precision_Metals_ __ 800-234-5613 United_Performance_Metals__888-282-3292 Steel AZ_Tool_Steel_LLC________480-784-1600 Coastal_Metals_ ______ 800-811-7466 Marzee_ __________ 602-269-5801 Metal_Supermarkets____801-972-2441 Ryerson___________303-227-6310 Samuel,_Son_&_CO.____ 303-422-8282 TCI_Precision_Metals_ __ 800-234-5613 Titanium Tube & Pipe Haynes_Intl_ ________713-937-7597 Supra_Alloys,Inc_______805-388-2138 Titanium, Rod, Bar & Wire Supra_Alloys,Inc_______805-388-2138 Titanium, Sheet & Plate Supra_Alloys,Inc_______805-388-2138 Washers LeeSpring_________480-539-5704 METAL DISTRIBUTORS Erickson_Metals______ 877-543-6061 Coastal_Metals_ ______ 800-811-7466

Haynes Intl 713-937-7597 Haynes_Intl__________713-937-7597 Metal_Supermarkets_ __ 801-972-2441 Ryerson___________303-227-6310 Samuel,_Son_&_CO.____ 303-422-8282 Supra_Alloys,Inc_______805-388-2138 United_Performance_Metals__888-282-3292 Western_States_Metals_ _ 801-978-0562 NEW MACHINERY CHIP CUTTING CNC Drilling/Tapping Methods_West_______ 602-437-2220 CNC Mills Action_Machine_ _____ 303-532-2900 AME,_Inc._ ________ 303-922-9266 Blackhawk_Industrial___ 303-744-1205 Foothills_Machinery____ 303-466-3777 Hartwig_Inc.________ 303-373-9450 J.M._Grisley_ _______ 801-486-7519 King_Machine_______ 208-345-9600 Methods_West_______ 602-437-2220 Moncktons_Mach_Tools_ _ 303-571-4933 Smith_Machinery_Co_ ___801-263-6403 Todd_Machinery_______801-294-6390 Tornos_USA_ ________951-695-0342 Triad_Machine________303-424-0268 CNC Lathes Action_Machine_ _____ 303-532-2900 AME,_Inc._ ________ 303-922-9266 Blackhawk_Industrial____303-744-1205 Foothills_Machinery____ 303-466-3777 J.M._Grisley_ _____ ______801-486-7519 Hartwig_Inc._________303-373-9450 King_Machine_______ 208-345-9600 Methods_West_______ 602-437-2220 Moncktons_Mach_Tools_ __303-571-4933 Muratec__________ 949-466-8255 Smith_Machinery_Co_ ___801-263-6403 Todd_Machinery_______801-294-6390 Triad_Machine________303-424-0268 CNC Swiss Turn Machines AME,_Inc._ ________ 303-922-9266 Methods_West_______ 602-437-2220 Moncktons_Mach_Tools_ _ 303-571-4933 Muratec_________ 949-466-8255 Tornos_USA_ ______ 951-695-0342 Triad_Machine_______ 303-424-0268 EDM Machines Action_Machine_ _____ 303-532-2900 AME,_Inc._ ________ 303-922-9266 Desert_EDM_Sales_____ 480-816-6300

EDM EDM_Network_ ______ 480-836-1782 Methods Methods_West_______ 602-437-2220 Moncktons Moncktons_Mach_Tools_ _ 303-571-4933 Smith Smith_Machinery_Co_ __ 801-263-6403 Todd Todd_Machinery______ 801-294-6390 Triad Triad_Machine_______ 303-424-0268 EDM Tooling Systems Desert_EDM_Sales_____ 480-816-6300 EDM_Network_ ______ 480-836-1782 EDM_Perform._Access.____ 800-336-2946 Global_EDM__Supply____ 480-836-8330 End Mills Helical_Solutions_ ____ 866-543-5422 NEW MACHINERY FABRICATION PrecisionFab_Inc._ ____303-779-9180 Band Saws AIT______________ 800-321-3195 Fabricating_Equip_Sales__ 303-466-7342 King_Machine_______ 208-345-9600 Marshall_Tool_&_Supply___ 602-269-6295 Bar Feeders Edge_Technologies______ 562-597-7824 Trusty-Cook_ ________ 877-240-2462 Cold Saws Fabricating_Equip_Sales___ 303-466-7342 CNC Punching Centers Blackhawk_Industrial___ 303-744-1205 PrecisionFab_Inc._ ____303-779-9180 S&S_Machinery_Sales___ 602-368-8542 Iron Workers AIT______________ 800-321-3195 Fabricating_Equip_Sales__ 303-466-7342 Jorgensen_Machine_Tools_ 800-952-0151 S&S_Machinery_Sales___ 602-368-8542 Laser Cutters Action_Machine_ _____ 303-532-2900 Blackhawk_Industrial___ 303-744-1205 Moncktons_Mach_Tools_ _ 303-571-4933 Muratec_________ 949-466-8255 PrecisionFab_Inc._ ____303-779-9180 S&S_Machinery_Sales___ 602-368-8542 Sidley_Diamond_Tool_ __ 800-544-9070 Triad_Machine_______ 303-424-0268 Pipe &Tube Benders/Notchers Fabricating_Equip_Sales__ 303-466-7342 S&S_Machinery_Sales___ 602-368-8542 Plasma/Gas CuttingSystems Muratec_________ 949-466-8255 Plate Rolls Fabricating_Equip_Sales__ 303-466-7342 Jorgensen_Machine_Tools_ 800-952-0151 Press Brakes Blackhawk_Industrial___ 303-744-1205 Fabricating_Equip_Sales__ 303-466-7342 Jorgensen_Machine_Tools_ 800-952-0151 King_Machine_______ 208-345-9600

PrecisionFab_Inc._ ____303-779-9180 S&S_Machinery_Sales___ 602-368-8542 Shearing Machines Action_Machine_ _____ 303-532-2900 Blackhawk_Industrial___ 303-744-1205_ Fabricating_Equip_Sales__ 303-466-7342 Jorgensen_Machine_Tools_ 800-952-0151 King_Machine_______ 208-345-9600 S&S_Machinery_Sales___ 602-368-8542 Turret Press Muratec_________ 949-466-8255 PrecisionFab_Inc._ ____303-779-9180 Welding Equipment Rocky_Mountain_Saw_Blades_ _303-761-3000 OTHER ACCESSORIES Tooling Systems Desert_EDM_Sales______ 480-816-6300 USA_EDM_Supply_ _____ 480-836-8330 PALLET SYSTEMS Automatic Pallet Systems Midaco___________ 847-593-8420 Automatic Door Opener Systems Midaco___________ 847-593-8420 Manual Rotary Pallet Systems Midaco___________ 847-593-8420 Robotic Part Loading Systems Midaco___________ 847-593-8420 PROG. SYSTEMS Factory Automation/Logistics Muratec_________ 949-466-8255 CAD/CAMSoftware, CAD AME,_Inc._ ________ 303-922-9266 Delcam_ __________ 877-35-2261 Feature_Cam_ ______ 602-502-9654 PROTOTYPE MACHINERY 3D_Parts_To_Go________801-380-7935 RECYCLING Recyclable Metals Iron_&_Metals,_Inc_____ 303-292-5555 Utah_Metal_Works,_Inc.___801-364-5679 Scrap Metal Recycling Iron_&_Metals,_Inc_____ 303-292-5555 Utah_Metal_Works,_Inc.___801-364-5679 REPAIR PARTS Belts All_World_Machinery_Supply_ 815-943-9111 Bearings(Precision) All_World_Machinery_Supply_ 815-943-9111

A2Z METALWORKER

• 53 •

March/Apr 2013

JEFFREY F. NAWROT

VP BUSINESS DEVELOPMENT 10530 E. 59th Street Indianapolis, IN 46236 ph317.823.6821 / 877.240.2462 cell317.946.1235 / home317.823.8615 fax317.823.6822 www.trusty-cook.com email-trustycook@sbcglobal.net

Gladhill_Associates_______719-495-8045 Financing IEC_ __ __________ 303-593-0403 Great_Western_Registrar____623-580-1881 Intech_Funding_ ______480-699-2512 MEP_ _ ____________801-863-7001 First Article Inspection Orion_Registrar__ _______303-645-4017 Advanced_Coord._Tech______303-469-6161 Sustaining_Edge_Solutions__ 888-572-9642 ISO Registrar Datum_Inspection_ _____ 602-997-1340 Western_States_Calibration___ 801-466-1700 American_Global_Standards_ 617-838-4648 Great_Western_Registrar____623-580-1881 Heavyhaul IRH_ __ ___________801-972-5581 Orion_Registrar__ _______303-645-4017 SERVICES Injection Molding Lean Manufacturing AS9100 Certification 3D_Parts_To_Go_ _____ 801-380-7935 MEP_ _ ____________ 801-863-7001 ABS_Quality_Evaluations_ 702-371-7591 ISO900/AS9100 Audits Sustaining_Edge_Solutions__ 888-572-9642 BMSC_ __________ 602-445-9400 American_Global_Standards_ 617-838-4648 Machine Tool Rebuilding MEP_ ___________ 801-863-7001 Great_Western_Registrar_ 623-580-1881 EDM_Network_ ______ 480-836-1782 Sustaining_Edge_Solutions__ 888-572-9642 ISO900/AS9100 Registration Process Improvement Calibration Services American_Global_Standards_ 617-838-4648 BMSC__ _____________ 602-445-9400 Advanced_Coord._Tech__ __ 303-469-6161 Great_Western_Registrar_ 623-580-1881 Sustaining_Edge_Solutions___ 888-572-9642 Klontech_Industrial_ ____480-948-1871 Inspection Services Rapid Prototyping Western_States_Calibration___ 801-466-1700 Advanced_Coord._Tech______303-469-6161 3D_Parts_To_Go_ _____ 801-380-7935 Consultant, ISO Datum_Inspection_ _____ 602-997-1340 ABS_Quality_Evaluations_ 702-371-7591 Team_Industrial_Services___ 801-397-2202 Reverse Engineering BMSC_ __________ 602-445-9400 Team_Industrial_Services___ 602-269-7868 Advanced_Coord._Tech______303-469-6161 MEP_ ___________ 801-863-7001 Diversified_Metal_Services____801-972-6093 Insurance Services Sustaining_Edge_Solutions__ 888-572-9642 Western_States_Calibration_ 801-466-1700 Sentry_Insurance_ ____ 303-619-4476 Klontech_Measure_Sol_____480-626-8131 Lean Consulting Rigging Calibration: Repair & Certify ABS_Quality_Evaluations_ 702-371-7591 IRH_ _____________801-972-5581 Western_States_Calibration___ 801-466-1700 Machine Repair/Servicing Spindle Rebuilding Calibration Services Jorgensen_Machine_Tools__ 800-952-0151 GMN_USA_ _________ 800-686-1679 Advanced_Coord._Tech__ __ 303-469-6161 MAG Particle Klontech_Industrial_ ____480-948-1871 Setco-Pope_Spindles______866-362-0699 Team_Industrial_Services_ __ 801-397-2202 Western_States_Calibration___ 801-466-1700 Staffing Team_Industrial_Services___ 602-269-7868 Calibration Training Resource_Mfg_________801-265-1999 Western_States_Calibration___ 801-466-1700 Process Improvement/ Audit Statistical Process Control ABS_Quality_Evaluations_ 702-371-7591 Contract Inspection Advanced_Coord._Tech__ __ 303-469-6161 BMSC__ _____________ 602-445-9400 Total_Quality_Systems_Inc.__ 480-377-6422 SHOP FLOOR AUTOMAKlontech_Measure_Sol___ 480-626-8131 Sustaining_Edge_Solutions__ 888-572-9642 TION X-Ray Total_Quality_Systems_Inc.__ 480-377-6422 Hardware: USB Contract Programming Certified_Inspection_Service_ _602-267-0661 Total_Quality_Systems_Inc.__ 480-377-6422 Semiray____________602-275-1917 Bytebox____________ 888-Bytebox Team_Industrial_Services___ 801-397-2202 Shop_Floor_Automations____ 877-611-5825 Education Scheduling College_Of_Western_Idaho__ 208-562-2346 Team_Industrial_Services___ 602-269-7868 Ogden-Weber__Tech_College_ 801-395-3795 ISO9000 / AS9100 Cert. Shop_Floor_Automations____ 877-611-5825 Serial Port Engineering Services American_Global_Standards_ 617-838-4648 Advanced_Coord._Tech__ __ 303-469-6161 BMSC__ _____________ 602-445-9400 Bytebox____________ 888-Bytebox Metric O-Rings All_World_Machinery_Supply_ 815-943-9111 Switches (Proximity, Limit) All_World_Machinery_Supply_ 815-943-9111 Valves (Hydraulic, Pneumatic) All_World_Machinery_Supply_ 815-943-9111 ROBOTIC EQUIPMENT Integrated_Systems_Inc__ 928-649-9600

A2Z METALWORKER

•

54 • March/ March/Apr Apr 2013

Shop_Floor_Automations____ 877-611-5825_ Software:CNC Networking Bytebox____________ 888-Bytebox Shop_Floor_Automations____ 877-611-5825 RS232 Cabling Shop_Floor_Automations____ 877-611-5825 Transportation IRH_ _____________801-972-5581 Virtual CNC Shop_Floor_Automations____ 877-611-5825 TOOLING Arc Cutting Tools Helical_Solutions_______866-543-5422 TRAINING CAD/CAM Training College_Of_Western_Idaho__ 208-562-2346 Davis_Applied_Tech_College___801-593-2483 CNC/Conventional Machining College_Of_Western_Idaho__ 208-562-2346 Davis_Applied_Tech_College___801-593-2483 Machining Software College_Of_Western_Idaho__ 208-562-2346 Davis_Applied_Tech_College___801-593-2483 USED MACHINERY EDM_Network_ ________ 480-836-1782 Jorgensen_Machine_Tools___800-952-0151 King_Maching_______ 208-345-9600 K.D._Capital_Equipment____480-922-1674 Methods_West_________602-437-2220 PrecisionFab_Inc._ ____303-779-9180 S&S_Machinery_Sales_____602-368-8542 WATERJET CUTTING MACHINERY Action_Machine________303-532-2900 Fabricating_Equip_Sales___ 303-466-7342 Flow_International_______800-446-3569 Global_EDM__Supply_____480-836-8330 Jorgensen_Machine_Tools___800-952-0151 King_Machine______ 208-345-9600 OMAX_Corp_________800-838-0343 Triad_Machine_______ 303-424-0268

Buyer’s Guide & Card Gallery Processes

www.daytonrogers.com 800-677-8881

● Complex Stampings ● On Time Delivery ● Quality Assurance

● Difficult Assemblies ●Contract Mfg. ●Design Assistance

Mark Erickson ● General Manager merickson@daytonrogers.com 763-717-6303

ASSEMBLIES Bar-S_Machine_________ 928-636-2115 Dayton_Rogers_ _______ 763-717-6303 Prescott’s_Manufacturing___ 719-482-5826 Progway____________435-656-9585 Riegert_Precision_Machine_ _ 208-442-1999 Superior_Metal_Products___ 303-791-7550 Wasatch_Laser_Processing___801-972-3500 Welded Assemblies Weiser/Mile_High_Precision_ 303-280-2778 BAR CODING Western_Sintering______509-375-3096 BENDING JQ_Enterprises__________801-975-0777 Mandrel Bending BK_Machine_Inc.________801-253-1929 BRAZING Precision_Casting_Repair_ __ 801-972-2345

BROACHING Coating:Zinc & Mag.Phos.

Ponderosa_Ind_________303-298-1801 Coating_Technologies____623-581-2648 Precision_Mach’d_Products_ 970-482-7676 Collins_Metal_Finishing_ __ 602-275-3117 Specialty_Steel_Services___ 801-539-8252 Powder_Extreme_Coatings__ 801-450-2819 Coating: Powder Turning: Automatic Powder_Extreme_Coatings_ _ 801-450-2819 Matrix_Machine_______ 480-966-4451 COLD SPRAY COATING Accuwright_Industries____480-892-9595 Ceramic High-Tech COMPOSITES Powder_Extreme_Coatings__ 801-450-2819 S.A._Composites________ 970-776-3877 Coating: Liquid CUTTING Collins_Metal_Finishing_ __ 602-275-3117 Plastic Pilkington_Metal_Finishing_ 801-972-2146 ImageTek_ __________ 303-806-8111 Coating: Nickel/Teflon/ DESIGN/ CAD/CAM Chrome Bar-S_Machine_________ 928-636-2115 Coating_Technologies____623-581-2648 H&_S_Machine_________ 801-755-7627 Collins_Metal_Finishing_ __ 602-275-3117 DIE CASTING LA_Specialties________ 602-269-7612 Watkins_Tool_&_Supply_ __ 303-295-9603

TVT_Die_Casting_ ______ 800-280-2278 Die Casting: Aluminum/Zinc TVT_Die_Casting_ ______ 800-280-2278 DIES Able_Machining_&_Eng.__ 801-268-6766 EDM EDM: Drilling Small Hole BK_Machine_Inc.______801-253-1929 Critical_Cut__________ 480-785-1316 Micropulse_West_______ 480-966-2300 EDM: Ram-Type (Sinking) Innovative_Precision____ 801-334-6317 Maverick_Mold_&_Machine_ 970-535-4604 Micropulse_West_______ 480-966-2300 Prec._Mach’d_Products____ 970-482-7676 EDM: Wire Advanced_Machining_Inc.__303-485-5256 Critical_Cut__________ 480-785-1316 Foremaster_Tool_______801-737--0265 • 55 • March/Apr 2013 55 •July/Aug 2011

A2Z METALWORKER A2Z METALWORKER

•

Kelly Martinez Machine Shop Lifetime Products, Inc. P.O. Box 160010, Freeport Center, Bldg D-11 Clearfield, UT 84016 T: 801.726.5312 F: 801.728.1979 email: kmartinez@lifetime.com

Innovative_Precision______801-334-6317 Micropulse_West_______ 480-966-2300 Paramount_Machine_ ___ 801-282-2755 H&R_Precision_________801-975-7400 Jet_Processing________ 623-869-6749 LA_Specialties________ 602-269-7612 Thompson_Machine_____ 505-823-1453 ELECTROPOLISHING Collins_Metal_Finishing_ __ 602-275-3117 ENGINEERING/DESIGN AzMark_ __________480-926-8969 Hexatron_ _________ 801-363-8010 FABRICATION Aero_Tech_ _______ 801-292-0493 Arrow_Sheet_Metal_Prod_ 303-427-6419 Cygnet____________ 818-240-7574 D&B_Precision_Products___ 719-473-3699 A2Z METALWORKER

•

56 •

March/Apr 2013

Dayton_Rogers_ Dayton Rogers ______ 763-717-6303 EMJD_Corporation_____303-761-5236 Focused_on_Machining_ __ 303-922-3076 GBC_ ____________303-988-6450 Hexatron_ _________ 801-363-8010 Howell_Precision_______ 623-582-4776 Kustom_Koncepts_ _____ 307-472-0818 MicroMetals_________ 719-593-8367 Mountain_View_Machine__ _435-755-0500 Star_Precision_ _______303-926-0559 Custom Auto/Truck/Bike H&_S_Machine_______ 801-755-7627 Fabrication: Filament Winding S.A._Composites_______ 970-776-3877 Fabrication: Composites S.A._Composites_______ 970-776-3877

Kustom_Koncepts_ _____ 307-472-0818_ Star_Precision_ _______303-926-0559 Fabrication: Medium & Large Arrow_Sheet_Metal_ ___303-427-6419 EMJD_Corp_ _______303-761-5236 Falcon_Sheet_Metal___ 801-298-5064 GBC_ ____________303-988-6450 Group_Mfg_Serv_______480-966-3952 Howell_Precision_______ 623-582-4776 MicroMetals_________ 719-593-8367 Kustom_Koncepts_ _____ 307-472-0818 Weiser/Mile_High_Precision_ 303-280-2778 Fabrication: Non-Metal Wesco_Laser_Mchg._ ____ 303-765-5916 Fabrication: Plastic Fabrication: Enclosures Falcon_Sheet_Metal___ 801-298-5064 ImageTek_ __________303-806-8111

Fabrication: SheetMetal Arrow_Sheet_Metal_Prod___ 303-427-6419 AzMark_ __________480-926-8969 Cygnet____________ 818-240-7574 D&B_Precision_Products___ 719-473-3699 Denver_Machine_Shop____303-295-6000 EMJD_Corporation_____303-761-5236 Falcon_Sheet_Metal___ 801-298-5064 GBC_ ____________303-988-6450 Group_Mfg_Serv_______480-966-3952 Hexatron_ _________ 801-363-8010 Howell_Precision_______ 623-582-4776 Kustom_Koncepts_ _____ 307-472-0818 Laser_Concepts_Inc._ ____ 801-280-7723 MicroMetals_________ 719-593-8367 Precision_Tech________801-285-7288 Richards_Fab_ _____ 801-409-0392 Star_Precision_ _______303-926-0559

Image Tek Business Card 2011 (Neil Daley: President) 3.5” Wide by 2” High

De-Rusting Weiser/Mile_High_Precision_303-280-2778 Wrico_ ___________480-892-7800 Glass Bead Clean Coating_Technologies_ ___623-581-2648 Fabrication: Steel EMJD_Corp_ ______ 303-761-5236 Hand Deburring: Precision Falcon_Sheet_Metal___ 801-298-5064 H&R_Precision________ 801-975-7400 Precision Electronic Sheet Metal Liquid Painting D&B_Precision_Products___ 719-473-3699 Industrialex_______ 303-456-6847 FINISHING Passivation Arizona_Finishing______602-438-4443 Certified_Inspection_Service___602-267-0661 Coating_Technologies_ ___623-581-2648 Coating_Technologies_ ___623-581-2648 Collins_Metal_Finishing_ __ 602-275-3117 Jet_Processing_____ 623-869-6749x117 Foresight_Finishing_ ____ 480-921-0000 Powder Coating Phoenix_Heat_Treating_ __ 602-258-7751 Arizona_Finishing______602-438-4443 Precision_Mach’d_Prod____ 970-482-7676 Industrialex_______ 303-456-6847 Star_Precision_ _______303-926-0559 LA_Specialties________ 602-269-7612 Superior_Grinding______801-487-9700 Pilkington_Metal_Finishing_ 801-972-2146 TVT_Die_Casting_ ______800-280-2278 Powder_Extreme_Coatings__ 801-450-2819

Star_Precision_ _______303-926-0559 Sandblasting Powder_Extreme_Coatings__ 801-450-2819 Silk Screening Arizona_Finishing______602-438-4443 Industrialex_______ 303-456-6847 Potting/Encapsulation Industrialex_______ 303-456-6847 Wet Paint/CARC MicroMetals_________ 719-593-8367 Aluminum (Medium & Large) Aero_Tech________ 801-292-0493 FOUNDRY May_Foundry_&_Machine_ 801-531-8931 State_Brass_Foundry_&_Mach._ 801-467-9461 GALVANIZING Jordan_River_Galvanizing__801-282-9375

Galvanizing: Hot Dip Jordan_River_Galvanizing__801-282-9375 Galvanizing: Zinc Jordan_River_Galvanizing__801-282-9375 GAS NITRIDING Blanchard_Metals_Proc._ __801-972-5590 GEAR CUTTING Ponderosa_Ind________ 303-298-1801 Specialty_Steel_Svcs____ 801-539-8252 Gear Hobbing Ponderosa_Ind________ 303-298-1801 GRINDING AzMark_ __________480-926-8969 ChemResearch________ 602-253-4175 Diversified_Metal_Services__ 801-972-6093 Focused_on_Machining_ __ 303-922-3076 GMN_USA_ ________ 800-686-1679 • 57 • March/Apr 2013 57 •July/Aug 2011

A2Z METALWORKER A2Z METALWORKER

•

A Veteran-Owned Small Business

Shawn Carlin scarlin@gmsaz.com

Prec._Mach’d_Products____ 970-482-7676 Precision_Tech________801-285-7288 Ron_Grob_Co._ _______970-667-5320 Steel_Services_Grinding_ __ 800-662-0126 Superior_Grinding______ 801487-9700 Superior_Metal_Products___ 303-791-7550 TCI_Precision_Metals_ __800-234-5613 Grinding, Blanchard Diversified_Metal_Services__ 801-972-6093 Steel_Services_Grinding_ __ 800-662-0126 Superior_Grinding______ 801487-9700 TCI_Precision_Metals_ __800-234-5613 Grinding, Centerless Ron_Grob_Co._ _______970-667-5320 Grinding, Double Disc TCI_Precision_Metals_ __800-234-5613 Grinding: OD AzMark_ __________480-926-8969 Focused_on_Machining_ __ 303-922-3076 Precision_Tech________801-285-7288 Ron_Grob_Co._ _______970-667-5320 Superior_Grinding______ 801487-9700 Superior_Metal_Products___303-791-7550 Grinding: Surface ChemResearch________ 602-253-4175 Superior_Grinding______ 801487-9700 Passivation Gold_Tech_Industries_____ 480-968-1930 Polishing Gold_Tech_Industries_____ 480-968-1930 A2Z METALWORKER

•

58 •

March/Apr 2013

Selective Coatings ImageTek ImageTek_ __________303-806-8111 FORMING D&B D&B_Precision_Products___ 719-473-3699 Star_Precision_ _______303-926-0559 Star Wasatch_Laser_Processing__801-972-3500 Wasatch HEAT TREATING Blanchard_Metals_Proc._ __801-972-5590 Phoenix_Heat_Treating_ __ 602-258-7751 Pilkington_Metal_Finishing__801-972-2146 Temperature_Processing___ 303-772-0250 Custom Temperature_Processing___ 303-772-0250 Cryogenics Temperature_Processing___ 303-772-0250 Aluminum Temperature_Processing___ 303-772-0250 Nitriding Temperature_Processing___ 303-772-0250 Vibrational Stress TestingTemperature_Processing___ 303-772-0250 INSPECTION Inspection, First Article Klontech_Measure_Sol____ 480-626-8131 Inspection Services Klontech_Measure_Sol____ 480-626-8131 Micropulse_West_______480-966-2300 Sustaining_Edge_Solutions__888-572-9642 IRON STITCHING Precision_Casting_Repair__801-972-2345 LASER CUTTING Laser Cutting Arrow_Sheet_Metal_Prod_303-427-6419 EMJD_Corporation_____303-761-5236 GBC_ ____________303-988-6450 Howell_Precision_______ 623-582-4776 Kustom_Koncepts_ _____ 307-472-0818

Laser_Concepts_Inc._ ____ 801-280-7723 Las Progway___________ 435-656-9585 Progway Richards_Fab_ _____ 801-409-0392 Richards Star_Precision_ _______303-926-0559 Star Wasatch_Laser_Processing__801-972-3500 Wasatch Wesco_Laser_Mchg._ ____ 303-765-5916 Wesco Wrico_ ___________480-892-7800 Wrico Laser Cutting: Non-Metal Wesco_Laser_Mchg._ ____ 303-765-5916 Laser Cutting: Pipe&Tube Wasatch_Laser_Processing__801-972-3500 Wesco_Laser_Mchg._ ____ 303-765-5916 EMI/RFI Shielding Industrialex_______ 303-456-6847 Laminating Wesco_Laser_Mchg.___303-765-5916 Laser Engraving 4_Axis_Machining_Inc.____ 303-295-1544 Laser Marking 4_Axis_Machining_Inc.____ 303-295-1544 LINE TOOLING Riegert_Precision_Machine__ 208-442-1999 MACHINING Advanced_Machining_Inc.__303-485-5256 American_Machine_&_Eng._ _ 801-973-0494 Apex_Engineering_____ 435-713-0072 BK_Machine_Inc.______ 801-253-1929 CM_Manufacturing_ ___ 406-543-4450 D&B_Precision_Products___ 719-473-3699 Datum_Machining______ 208-376-6131 Focused_on_Machining_ __ 303-922-3076 GBC_ ____________303-988-6450 H&R_Precision________ 801-975-7400 Mountain_View_Machine_ _435-755-0500 Peterson_Machining_____303-449-5755 R&H_Machine_________801-621-7922 RD_Machine_&_MFg____ 801-977-0447 Radtech__________ 303-789-4247 Riegert_Precision_Machine_ 208-442-1999 Skydandee_Mfg______ 801-774-8031 St._Vrain__________ 303-702-1529 Superior_Metal_Products_ 303-791-7550 TVT_Die_Casting______ 800-280-2278 Machining: 3D Advanced_Machining_Inc.__303-485-5256

Micropulse_West_______480-966-2300 Machining: 5 Axis 4_Axis_Machining_Inc.____303-295-1544 5th_Axis_Fixtures______ 858-505-0432 Accutech_Machine______ 801-975-1117 Advanced_Machining_Inc.__303-485-5256 AzMark_ __________480-926-8969 Cling’s_Manufacturing____ 480-968-1778 Faustson___________303-420-7422 Howard_PMP__ _______ 801-808-4106 Peterson_Machining_____303-449-5755 S.A._Composites_______ 970-776-3877 St._Vrain__________ 303-702-1529 Superior_Metal_Products_ 303-791-7550 Machining: Aerospace Advanced_Machining_Inc.__303-485-5256 AzMark_ __________480-926-8969 H&R_Precision________ 801-975-7400 CM_Manufacturing_ ___ 406-543-4450 Datum_Machining______ 208-376-6131 Howard_PMP__ _______ 801-808-4106 Matrix_Machine_____ 480-966-4451 Micropulse_West_______480-966-2300 Mountain_View_Machine_ _435-755-0500 Paramount_Machine_ ___801-282-2755 Peterson_Machining_____303-449-5755 Pinnacle_Precision_ ___435-563-2722 Ponderosa_Ind________ 303-298-1801 Precision_Mach’d_Products_ 970-482-7676 Precision_Tech________801-285-7288 Prescott’s_Mfg________ 719-482-5826

Quick_Turn_Precision_____801-334-6800 Radtech__________ 303-789-4247 RD_Machine_&_MFg____ 801-977-0447 Skydandee_Mfg______ 801-774-8031 St._Vrain__________ 303-702-1529 Superior_Metal_Products_ 303-791-7550 Machining: CNC 4_Axis_Machining_Inc.____303-295-1544 Able_Machining_&_Eng.__ 801-268-6766 Apex_Engineering_____ 435-713-0072 Advanced_Machining_Inc.__303-485-5256 Accutech_Machine______ 801-975-1117 American_Machine_&_Eng._ _ 801-973-0494 Apex_Engineering_____ 435-713-0072 Bar-S_Machine_______ 928-636-2115 BK_Machine_Inc.______ 801-253-1929 Cling’s_Manufacturing_ _ 480-968-1778 CM_Manufacturing_ ___ 406-543-4450 Datum_Machining______ 208-376-6131 DMSI___________801-972-6093 Faustson__________ 303-420-7422 Focused_on_Machining_ __ 303-922-3076 Foremaster_Tool_____ 801-737--0265 GBC_ ____________303-988-6450 H&R_Precision_______ 801-975-7400 H&_S_Machine_______ 801-755-7627 Hexatron_ _________ 801-363-8010 Howard_PMP__ _______ 801-808-4106 Innovative_Precision_ __ 801-334-6317 L.A.R._Manufacturing___ 801-280-3505 Leading_Edge_Machine__ 435-563-9425 _Maverick_Mold_&_Machine_ 970-535-4604 MicroMetals_________ 719-593-8367 Peterson_Machining_____303-449-5755 Pinnacle_Precision_ ___435-563-2722 R&H_Machine_________801-621-7922 RD_Machine_&_Mfg_ ___ 801-977-0447 Riegert_Precision_Machine_ 208-442-1999 St._Vrain__________ 303-702-1529

FFocused_on_Machining_ ocused Machining __ 303-922-3076 Mountain Mountain_View_Machine__435-755-0500 Peterson Peterson_Machining_____303-449-5755 Ponderosa Ponderosa_Ind________ 303-298-1801 Prec.

Prec._Mach’d_Products__970-482-7676 Precision Precision_Tech________801-285-7288 Ron_Grob_Co._ _______970-667-5320 Ron Tool_Design_______ 801-231-4404 Tool

Able Machining & Eng. 801-268-6766 Able_Machining_&_Eng.__ Accutech_Machine______ 801-975-1117 “Precision Machining Solutions for Industry” Advanced_Machining_Inc.__303-485-5256 Robert Bergstrom American_Machine_&_Eng._ _ 801-973-0494 President Apex_Engineering_____ 435-713-0072 Phone: (303) 702-1529 x 103 819 So. Lincoln Street P. O. Box 1066 Fax: (303) 702-1534 Bar-S_Machine_______ 928-636-2115 Email: bobb@stvrainmfg.com Longmont, CO 80502 Website: stvrainmfg.com RFQ Email: mail@stvrainmfg.com BK_Machine_Inc.______ 801-253-1929 Cling’s_Manufacturing_ _ 480-968-1778 Star_Precision_ _______303-926-0559 Faustson___________303-420-7422 Superior_Metal_Products_ 303-791-7550 Machining: Mold Base Focused_on_Machining_ __ 303-922-3076 Tool_Design_______ 801-231-4404 Maverick_Mold_&_Machine___970-535-4604 Foremaster_Tool______ 801-737--0265 Machining: Contract Machining: Mold Making H&R_Precision________ 801-975-7400 American_Machine_&_Eng._ _ 801-973-0494 R&H_Machine_________801-621-7922 Innovative_Precision_ __ 801-334-6317 Machining: Plastic Howard_PMP__ _______ 801-808-4106 L.A.R._Manufacturing___ 801-280-3505 Paramount_Machine_ ___801-282-2755 ImageTek_ _________ 303-806-8111 Leading_Edge_Machine_ _ 435-563-9425 Radtech__________ 303-789-4247 Machining: Production Skydandee_Mfg______ 801-774-8031 Able_Machining_&_Eng.__ 801-268-6766 Micropulse_West______ 480-966-2300 Mountain_View_Machine_ 435-755-0500 Machining: DoD Apex_Engineering_____ 435-713-0072 Newport_Tool_ _______801-295-7411 CM_Manufacturing_ ___ 406-543-4450 BK_Machine_Inc.______ 801-253-1929 Machining: Laser CM_Manufacturing_ ___ 406-543-4450 Quick_Turn_Precision_ __ 801-334-6800 AzMark_ __________480-926-8969 Datum_Machining______ 208-376-6131 R&H_Machine_________801-621-7922 Faustson__________ 303-420-7422 Faustson__________ 303-420-7422 Radtech_ _________ 303-789-4247 Foremaster_Tool______ 801-737--0265 Focused_on_Machining_ __ 303-922-3076 RD_Machine_&_Mfg_ ___ 801-977-0447 Gerome_Mfg________520-622-8402 H&R_Precision________ 801-975-7400 Riegert_Precision_Machine__ 208-442-1999 Innovative_Precision_ __ 801-334-6317 Howard_PMP__ _______ 801-808-4106 Skydandee_Mfg______ 801-774-8031 L.A.R._Manufacturing___ 801-280-3505 Innovative_Precision_ __ 801-334-6317 S.A._Composites_______ 970-776-3877 Matrix_Machine______ 480-966-4451 L.A.R._Manufacturing___ 801-280-3505 St._Vrain__________ 303-702-1529 MicroMetals_________ 719-593-8367 Newport_Tool_ _______801-295-7411 Superior_Metal_Products_ 303-791-7550 Paramount_Machine_ __ 801-282-2755 Paramount_Machine_ __ 801-282-2755 Tool_Design_______ 801-231-4404 RD_Machine_&_Mfg_ ___ 801-977-0447 Peterson_Machining_____303-449-5755 Machining: Precision Machining:Medical Ponderosa_Ind________ 303-298-1801 4_Axis_Machining_Inc._ __ 303-295-1544 Advanced_Machining_Inc.__303-485-5256 Prescott’s_Mfg_______ 719-482-5826 Able_Machining_&_Eng.__ 801-268-6766 Datum_Machining______ 208-376-6131 R&H_Machine_________801-621-7922 American_Machine_&_Eng._ _ 801-973-0494 Pinnacle_Precision_ ___435-563-2722 Radtech__________ 303-789-4247 Prescott’s_Mfg________ 719-482-5826 RD_Machine_&_Mfg_ ___ 801-977-0447 BK_Machine_Inc.______ 801-253-1929 Riegert_Precision_Machine__ 208-442-1999 CM_Manufacturing_ ___ 406-543-4450 Machining: Milling Advanced_Machining_Inc.__303-485-5256 Star_Precision_ _______303-926-0559 Focused_on_Machining_ __ 303-922-3076 American_Machine_&_Eng._ _ 801-973-0494 Tool_Design_______ 801-231-4404 MicroMetals_________ 719-593-8367 H&R_Precision________ 801-975-7400 Cling’s_Manufacturing____ 480-968-1778 Machining: Prototype Datum_Machining______ 208-376-6131 4_Axis_Machining_Inc.____303-295-1544 Howard_PMP__ _______ 801-808-4106_ St. Vrain Manufacturing, Inc.

A2Z METALWORKER

• 59 •

March/Apr 2013

FOUNDER & CEO NATE WOODS nate@quickturn mach.com

3340 South 1500 W, Ogden, UT 84401

801-334-6800

www.QUICKTURNMACH.com

Newport_Tool_ _______801-295-7411 Peterson_Machining_____303-449-5755 Pinnacle_Precision_ ___435-563-2722 Ponderosa_Ind________ 303-298-1801 Precision_Machined_Prod.__ 970-482-7676 Precision_Tech________801-285-7288 Riegert_Precision_Machine__ 208-442-1999 Superior_Metal_Products___303-791-7550 Tool_Design_______ 801-231-4404 TVT_Die_Casting_ ______ 800-280-2278 Machining: R & D American_Machine_&_Eng._ _ 801-973-0494 Peterson_Machining_____303-449-5755 Prescott’s_Mfg_______ 719-482-5826 Superior_Metal_Products___ 303-791-7550 Wasatch_Laser_Processing__801-972-3500 Machining: Swiss Bar-S_Machine_______ 928-636-2115 HowardPMP________ 801-619-9850 A2Z METALWORKER

•

60 •

March/Apr 2013

Machining: Ultra-Precision Pinnacle_Precision_ ___435-563-2722 Machining: Waterjet Colorado_Waterjet_ ___970-532-5404 Quick_Turn_Precision_ __801-334-6800 MANUFACTURING Group_Mfg_Serv______480-966-3952 Prescott’s_Manufacturing_719-482-5826 RD_Machine_&_Mfg_ ___ 801-977-0447 Composites S.A._Composites_______ 970-776-3877 Contract Apex_Engineering_____ 435-713-0072 Manufacturing: Electrode Wire-Tech_ ________ 480-966-1591 Production Aero_Tech_ ________ 801-292-0493 BK_Machine_Inc.______801-253-1929 EMJD_Corporation_____303-761-5236 L.A.R._Manufacturing___ 801-280-3505 L.A.R. Laser_Concepts_Inc.____ 801-280-7723 Laser Prescott’s_Manufacturing_719-482-5826 Prescott’s White_Rock_Inc________ 435-750-6414 White Rapid Prototyping White_Rock_Inc________ 435-750-6414 White Robotic CNC DMSI____________ 801-972-6093 DMSI Routering CNC DMSI____________ 801-972-6093 DMSI Small Part Pinnacle_Precision_ ___435-563-2722 Pinnacle White_Rock_Inc________ 435-750-6414 White Turnkey Product Services Aero_Tech_ ________ 801-292-0493 Aero L.A.R._Manufacturing___ 801-280-3505 L.A.R. Accuwright_Industries___480-892-9595 Accuwright METAL INJECTION MOLDING (MIM) AFT_ ____________ 303-833-6112 AFT Progway___________435-656-9585 Progway METAL STAMPING Hi-Production Precision Pinnacle_Precision_ ___435-563-2722 Stamping Ron_Grob_Co._ _______970-667-5320 White_Rock_Inc________ 435-750-6414 Precision_Die_&_Stamping__480-967-2038 Thompson_Machine_____ 505-823-1453 Machining: Turning METALIZING American_Machine_&_Eng._ _ 801-973-0494 Apex_Engineering_____ 435-713-0072 Accuwright_Industries___480-892-9595 AzMark_ __________480-926-8969 MOLDING: ARC Bar-S_Machine_______ 928-636-2115 Watkins_Tool_&_Supply__303-295-9603 BK_Machine_Inc.______ 801-253-1929 MOLDS Datum_Machining______ 208-376-6131 Colorado_Tool_Design_Inc_ 720-218-5246 Faustson__________ 303-420-7422 Lifetime_Products_____ 801-728-1260 H&R_Precision________ 801-975-7400 Maverick_Mold_&_Machine_ 970-535-4604 HowardPMP________ 801-619-9850 Prescott’s_Manufacturing_719-482-5826 Leading_Edge_Machine_ __ 435-563-9425 Progway__________435-656-9585 Mountain_View_Machine___ 435-755-0500 Molds: Blow Prec_Mach’d_Products_ ___ 970-482-7676 Lifetime_Products_____ 801-728-1260 Quick_Turn_Precision_ __801-334-6800 Molds: Plastic Injection RD_Machine_&_Mfg_ ___ 801-977-0447 Tool_Design_______ 801-231-4404 Lifetime_Products_ _____801-728-1260 Wesco_Laser_Mchg______ 303-765-5916 Maverick_Mold_&_Machine_ 970-535-4604

Watkins_Tool_&_Supply_ _ 303-295-9603 Molds: DieCast Design Colorado_Tool_Design_Inc_ _ 720-218-5246 Molds: Injection Design Colorado_Tool_Design_Inc_ _ 720-218-5246 Molds: Trim Die Design Colorado_Tool_Design_Inc_ _ 720-218-5246 Molds Steel DMSI____________ 801-972-6093 Aero_Tech_ ________ 801-292-0493 Arizona_Finishing_____602-438-4443 ChemResearch_ _____ 602-253-4175 Jet_Processing____ 623-869-6749x117 Mil Spec Painting Industrialex_______ 303-456-6847 PAINTING Richards_Fab_ _____ 801-409-0392 PARTS: MISC. Lifetime_Products_ _____801-728-1260 PLATING Blanchard_Metals_Proc.__ 801-972-5590 ChemResearch_ _____ 602-253-4175 Collins_Metal_Finishing_ __ 602-275-3117 Foresight_Finishing_ ____ 480-921-0000 Gold_Tech_Industries_ __ 480-968-1930 LA_Specialties_______ 602-269-7612 Anodizing Blanchard_Metals_Proc._ __801-972-5590 ChemResearch________ 602-253-4175 Collins_Metal_Finishing_ __ 602-275-3117 Jet_Processing_____ 623-869-6749x117 Pilkington_Metal_Finishing_ 801-972-2146 Gold/Silver Plate Foresight_Finishing_ ____ 480-921-0000 Gold_Tech_Industries_ __ 480-968-1930 Nickel/Chrome Gold_Tech_Industries_ __ 480-968-1930 Tin Plate Gold_Tech_Industries_ __ 480-968-1930 POLISHING Gold_Tech_Industries_ __ 480-968-1930 LA_Specialties_______ 602-269-7612 PRECISION FORMING Richards_Fab________801-409-0392 Thompson_Machine_____ 505-823-1453 Wrico_ ___________480-892-7800 PRINTING Custom Screen ImageTek__________303-806-8111 PROCESSING: METAL Chemical LA_Specialties________ 602-269-7612 PUNCHING Group_Manufacturing_Serv_ 480-966-3952 Star_Precision_ _______303-926-0559

A2Z METALWORKER

• 60 •

March/Apr2013

,-./012%($012'!034" 5*67+*6(809:0;/-/< 9$==>0;;;?;.-?@A-/

Specializing in laser welding, precision welding and microwelding of dies, molds and other tooling.

!"#$%&'()'"*++(,*+'-./ 0#""#+-#.(,*+'-./(( 1-2"3'-#.(,*+'-./

!!!"#$%#$&'(')"#*+

Stamping:Deep Draw REPAIR Bearing Surface Thompson_Machine_____ 505-823-1453 Denver_Machine_Shop____303-295-6000 Stamping:Design Hydraulic Cylinder Frontier_Metal_Stamping_ _ 303-458-5129 Denver_Machine_Shop____303-295-6000 Pacific_Metal_Stampings___ 661-257-7656 ROLL FORMING Weiser/Mile_High_Prec._303280-2778 Lifetime_Products_ _____801-728-1260 Stamping:Flat Forming Rolling: thread SPRING_WORKS_Utah_ ___ 801-298-0113 Ron_Grob_Co._ _______970-667-5320 Stamping: Light Cygnet____________ 818-240-7574 ROUTERING, CNC Micropulse_West_______480-966-2300 Pacific_Metal_Stampings___ 661-257-7656 SAW CUTTING SPRING_WORKS_Utah_ ___ 801-298-0113 Diversified_Metal_Services__ 801-972-6093 Stamping:Precision SHOT PEENING Cygnet____________ 818-240-7574 Blanchard_Metals_Proc._ __801-972-5590 Frontier_Metal_Stamping_ _ 303-458-5129 SINTERING Western_Sintering______509-375-3096 Pacific_Metal_Stampings___ 661-257-7656 Precision_Die_&_Stamping__480-967-2038 SPINNING: METAL Stamping:Prototype Metal_Spinning_Solutions__ 480-899-0939 SPLINES Frontier_Metal_Stamping_ _ 303-458-5129 Hexatron_ _________ 801-363-8010 Stamping:Short Run Specialty_Steel_Services__ 801-539-8252 Cygnet____________ 818-240-7574 SWISS SCREW MCHG. SPRAY: METAL, PLASMA Howard_PMP__ _______ 801-808-4106 Accuwright_Industries____480-892-9595 White_Rock_Inc________ 435-750-6414 SPRINGS Screwing: Lead Flat & Wire SPRING_WORKS_Utah_ ___ 801-298-0113 Ron_Grob_Co._ _______970-667-5320 STAMPING TAPPING Cygnet____________ 818-240-7574 Laser_Concepts_Inc._ ____ 801-280-7723 Dayton_Rogers_ ______ 763-717-6303 TEST FIXTURES Frontier_Metal_Stamping_ _ 303-458-5129 Riegert_Precision_Machine__ 208-442-1999 Lifetime_Products_ _____801-728-1260 TESTING Pacific_Metal_Stampings___ 661-257-7656 Testing: Corrosive Precision_Die_&_Stamping__480-967-2038 Richards_Fab_ _____ 801-409-0392 CascadeTEK_ ________888-835-9250 Testing: Non-Destructive Thompson_Machine___ 505-823-1453 Weiser/Mile_High_Prec._303280-2778 Blanchard_Metals_Proc._ __801-972-5590 Stamping:Aerospace CascadeTEK_ ________888-835-9250 Frontier_Metal_Stamping_ _ 303-458-5129 Jet_Processing_____ 623-869-6749x117 Pacific_Metal_Stampings___ 661-257-7656 Pilkington_Metal_Finishing___ 801-972-2146 Precision_Die_&_Stamping__480-967-2038 THERMAL SPRAY Stamping:Assembly Accuwright_Industries____480-892-9595 Frontier_Metal_Stamping_ _ 303-458-5129 TOOL & DIE Stamping:Bending Foremaster_Tool______ 801-737--0265 Pacific_Metal_Stampings___ 661-257-7656 Newport_Tool_ _______801-295-7411

Thomp Machine Thompson_Machine_____ 505-823-1453 Wrico_ ___________480-892-7800 TOOLING Frontier_Metal_Stamping_ _ 303-458-5129 Mountain_View_Machine_ _435-755-0500 Precision_Tech________801-285-7288 Western_Sintering______509-375-3096 TUBE FORMING Cling’s_Manufacturing____ 480-968-1778 Howell_Precision_______ 623-582-4776 Formed Tubing Cling’s_Manufacturing____ 480-968-1778 Howell_Precision_______ 623-582-4776 Tube Bending /Fabrication Cling’s_Manufacturing____ 480-968-1778 Howell_Precision_______ 623-582-4776 WATERJET CUTTING Colorado_Waterjet_ __ 970-532-5404 Diversified_Metal_Services__ 801-972-6093 JQ_Enterprises________ 801-975-0777 Leading_Edge_Machine_ __435-563-9425 Marzee_Inc._______ 602-269-5801 MicroMetals_________ 719-593-8367 Mountain_View_Machine_ _435-755-0500 Quick_Turn_Precision_____801-334-6800

WELDING Able_Machining_&_Eng.__ 801-268-6766 Arrow_Sheet_Metal_Prod___ 303-427-6419 D&B_Precision_Products___ 719-473-3699 Dayton_Rogers_ ______ 763-717-6303 Denver_Machine_Shop____303-295-6000 GBC_ ____________303-988-6450 H&_S_Machine_______ 801-755-7627 JQ_Enterprises________ 801-975-0777 Kustom_Koncepts_ _____ 307-472-0818 Laser_Concepts_Inc._ ____ 801-280-7723 MicroMetals_________ 719-593-8367 Mountain_View_Machine_ _435-755-0500 Precision_Casting_Repair_ _801-972-2345 Precision_Tech________801-285-7288 Quick_Turn_Precision_____801-334-6800 Richards_Fab_ _____ 801-409-0392 Star_Precision_ _______303-926-0559 Wasatch_Laser_Processing__801-972-3500

Weiser/Mile_High_Prec._303280-2778 Weldtech,_Inc______303-828-WELD Welding: Aluminum Medium & Large MicroMetals_________ 719-593-8367 Skyline_Products________719-392-9046 Richards_Fab_ _____ 801-409-0392 Welding: Dies/Molds Weldtech,_Inc______303-828-WELD Welding: Micro Weldtech,_Inc______303-828-WELD Welding: Orbital Richards_Fab_ _____ 801-409-0392 Welding: Precision Arrow_Sheet_Metal_Prod___ 303-427-6419 D&B_Precision_Products___ 719-473-3699 MicroMetals_________ 719-593-8367 Richards_Fab_ _____ 801-409-0392 Weiser/Mile_High_Prec._303280-2778 Weldtech,_Inc______303-828-WELD Welding: TIG Arrow_Sheet_Metal_Prod___ 303-427-6419 GBC_ ____________303-988-6450 Mountain_View_Machine___ 435-755-0500_ WIRE FORMING SPRING_WORKS_Utah_ ___ 801-298-0113 LATE BREAKING CARD ADDITION MANUFACTURERS’ REP PrecisionTool Holding Products Hole Making Products Machine Tool Accessories Workholding Solutions Milling and Turning Products Rapid Optical Part Inspection Schenk_Intertech______480-323-6755 61 2013 61• •March/Apr July/Aug 2009

2 AA2Z Z METALWORKER METALWORKER• •

Index of Advertisers 4 Axis Machining, Inc...57 5th Axis Fixtures...44,52 Able Machine & Engineering...60 ABS Quality Evaluations...54 Accutech Machine Inc...57 Accuwright Ind....59 Action Machine....49 Advanced Coordinate Tech...50 Advanced Machining Inc...58 Aero Tech Mfg...56 AFT...60 AgieCharmilles...19,60 AIT...11,51 AllWorld Machinery Supply..14,50 Almar...27,50 AMCON...45 AME, Inc...50 American Global Standards...32,54 APEX Engineering...59 Arizona Finishing...58 AZ Tool Steel...55 Arrow Sheet Metal...57 AZMark Aerospace...55 bandsawreviews.com...47 Bar-S Machine, Inc...56 Bemsco...56 BK Machine Inc...61 Blackhawk Industrial...49,51 Blanchard Metals Proc...56 Blaser Swisslube...50 BMSC..34,54 Bytebox...50 Canyon State Oil ...49,50,64 CascadeTEK...61 Castrol ...49,51,52,64 ChemResearch...32,57 Chevalier...25 Christensen Oil...64 Cling’s Manufacturing...58 CM Manufacturing...59 Coastal Metals...18,52 Coating Technologies...57 College of Western Idaho...54 Collins Metal Finishing...57 Colorado Tool Design, Inc...58 Colorado Waterjet...58 Critical Cut...55 Cygnet Stamping...57 D&B Precision Products...56 Datum Inspection Services...52 Datum Machining...58 Davis Applied Tech College...51 Dayton Rogers...55 DCM Tech...38,49 A2Z METALWORKER

•

62 •

Delcam...49 Denver Machine Shop...56 Desert EDM Sales...52 DMSI...55 Edge Technologies...52 EDM Network...31,51 EDM Performance Accessories...51 EMJD Corp....57 Erickson Metals...49 Fabricating Equipment Sales..34,51 Fadal CNC...8,50 Falcon Sheet Metal...59 Faustson...22,56 Flow International..49 Focused On Machining...58 Foothills Machinery..7,49 Foremaster Tool...59 Foresight Finishing...57 Frontier Metal Stamping...60 Gage Lab Products...51 Ganesh Machinery...21 GBC...56 Gladhill Assoc...23,49 Global EDM Supply...50 GMN USA...50 Gold Tech Industries...55 Great Western Registrar...54 Group Manufacturing...56 H&R Precision...56 HAAS Automation...2,49 Hangsterfers...50 Hartwig...49 Haynes Intl...52 Helical Solutions...51 Hexatron...57 Howell Precision...42,57 Horizon Carbide...51 Howard PMP...46,60 Image Tek...57 Industrialex...55 Industrial Heat Treat Co...57 Innovative Precision...55 IRH...52 Iron & Metals, Inc...12,52 J.M. Grisley...17,49 Jet Processing...58 Jordan River Galvanizing...59 Jorgensen Machine Tools ...49,52 JQ Enterprises...60 K.D. Capital Equipment...51 King Machine...21,49,52 Klontech Industrial..50,51 Kodiak Ind...50 Kustom Koncepts...56

March/Apr 2013

Ron Grob CO....57 L.A. Specialties...56 Ryerson...15,51,52 L.A.R. Manufacturing...55 SA Composites...55 Laser Concepts...58 S&S Machinery...50 Leading Edge Machine...58 Lifetime Products, Inc...56 Samuel Son & CO..13,39,52 Marshall Tool...43,51 Sandvik...49 Marzee...48,57 Schenk Intertech...61 Matrix Machine Inc...56,57 Seco Tools Inc...50 Maverick Mold & Machine...55 Self Clinch Direct...51 May Foundry & Machine...55 Sentry Insurance...36,54 MEP...51 Setco Spindles & Slides...50 Metal Spinning...56 Shop Floor Automations...51 Metal Supermarkets...37,51 Shop Tools, Inc..10,50 Methods ...49 Skydandee Mfg...55 Micro 100...44,50 Smith Machinery..49,63 MicroMetals..57 Specialty Steel Serv....36,56 Micropulse West ...55 SPRING WORKS Utah...60 Midaco..52 St.Vrain Manufacturing...59 Monckton Mach...2,33,49,53 Star Metal Fluids...3,49,50,51 Mountain View...55 Star Precision...56 Muratec...52 State Brass Foundry & Machine...56 Newport Tool...59 Steel Services Grinding...57 Ogden-Weber Tech College...51 Stu Blattner..24-25 OGP...50 Superior Grinding..20,57 Omax...49 Superior Metal Products...60 Orion Registrar...51 Supra Alloys, Inc...52 Pacific Metal Stampings...61 Sustaining Edge Solutions...50 Paramount Machine...56 TCI Precision Metals...40,51 Peterson Machining...59 Team Industrial Services..49,51 Phoenix Heat Treating...58 Temp Processing...56 Pilkington Metal Finishing...57 Todd Machinery...49 Pinnacle Precision..59 Thompson Machine...57 Ponderosa Industries...58 Powder Extreme Coatings...55 Tool Design...56 Total Quality Systems...50 Precision Casting Repair...55 Precision Die & Stamping....61 Tornos...9,49 Toyo Tanso USA...50 PrecisionFab Inc...52 Precision Mach’d Products...60 trajansaw.com...5 Triad Machinery...50 Precision Tech...59 Trusty Cook...41,54 Premier Precision...58 TVT Die Casting...22,55 Prescott’s Mfg...55 Universal Laser Systems...23 Prime Axis Machine...16 United Performance Metals...42,53 Progway...57 Utah Metal Works, Inc...26,52 Qualichem...52 Wasatch Laser Forming...59 QuickTurn Precision...1,28-30,60 Watkins Tool & Supply...47,54 R&H Machine...58 Weiser/Mile High Precision...61 Radtech..59 Weldtech, Inc...61 RD Machine...60 Wesco Laser Machining...57 ResourceMfg...35,56 Western Sintering...61 Richards Fab...56 Riegert Precision Machine...55 Western States Calibration...53 Western States Metals...51 RMTMA...46 Rocky Mountain Saw Blades...48,52 White Rock...61 Roentgen USA...52 Wrico Stamping...57

www. smithmachinetools.com “Providing Technology Solutions for Competitive Manufacturing” “They (Smith Machinery) do what they say they will do, and their support is everything we expect from our machine tool suppliers.”

Now with 2 local factory service technicians.This, combined with our Smith Neotech service group, will provide you with the best service support available in the Mountain States.

“ S m i t h Machinery, our dealer for the Mazak line of machine tool p ro d u c t s, i s o u t s t a n d i n g.

They sell a great product and their service and support is exceptional.”

“We had 3everal different manufacturers perform competitive test cuts for our evaluation, and the Mitsubishi came out on top. It took 1/3 less time to cut the part, and it used 1/3 less wire consumption for a comparable finish and accuracy.”

MITSUBISHI EDM, Laser, Waterjet, VMCs, Milling Machines & Press Brakes

www. smithmachinetools.com “Providing Technology Solutions for Competitive Manufacturing”

Star Swiss CNC

“They (Smith Machinery) do what they say they will do, and their support is everything we expect from our machine tool suppliers.”

Now with 2 local factory service technicians.This, combined with our Smith Neotech service group, will provide you with the best service support available in the Mountain States.

CNC Tool & Cutter Grinders MITSUBISHI

EDM, Laser, Waterjet, VMCs, Milling Machines & Press Brakes

Proud member of

“ S m i t h Machinery, our dealer for the Mazak line of machine tool p ro d u c t s, i s o u t s t a n d i n g.

They sell a great product and their service and support is exceptional.”

Star Swiss CNC

“We had 3everal different manufacturers perform competitive test cuts for our evaluation, and the Mitsubishi came out on top. It took 1/3 less time to cut the part, and it used 1/3 less wire consumption for a comparable finish and accuracy.”

CNC Tool & Cutter Grinders

Combination “Teach” Lathes

Combination “Teach” Lathes

Sheet Hydroforming

SMITH MACHINERY CO., INC. Proud member of

SMITH MACHINERY CO., INC.

Sheet Hydroforming

ISO 9001: 2008 Certified

41 West Guest Avenue Salt Lake City, UT 84115 Phone: 801-263-6403 Fax: 801-263-6404

ISO 9001: 2008 Certified

41 West Guest Avenue Salt Lake City, UT 84115 Phone: 801-263-6403 Fax: 801-263-6404

SUPERIOR PRODUCTS • SUPERIOR SUPPORT • SERVICE • APPLICATIONS • SALES

SUPERIOR PRODUCTS • SUPERIOR SUPPORT • SERVICE • APPLICATIONS • SALES

A2Z Metalworker P. O. Box 93295 Phoenix, AZ 85070

maximize productivity and reduce costs with the power of castroL high performance products It’s what’s on the InsIde that counts …

Inside every Castrol drum is cutting edge technology that is proven to impact process efficiency and operating costs.

Offering a wide range of products to meet your application needs, we provide the maximum performance benefits you seek, accompanied by world-class service and technical expertise. Castrol’s line is broad enough to cross all applications, yet refined enough to fulfill the intricate needs of the specialty markets we serve.

the RIght lIne of PRoducts

the technoLogy inside

• Cutting & Grinding • High Performance Lubricants • Greases • Deformation • Cleaners • Corrosion Preventatives • Chain Oils

discover why only castrol Industrial has the technology InsIde. Castrol Industrial North America Inc. l 150 West Warrenville Rd. 603-1E l Naperville, IL 60563 l techhelp@castrol.com l castrol.com/industrial

A2Z METALWORKER

Christensen Oil Provo, UT christensenoil.com 1 800 654 0438 • 64 • March/ Apr 2013 Serving Utah & Idaho

Maxum Petroleum canyonstateoil.com 1 800 894 7773 Serving Colorado