Timing Tools - BMW Petrol Engine Setting/Locking Kit For BMW N62/N62tu V8 & N73 V12 – Chain Drive 0XAT1402 - Introduction: Suitable for setting and adjusting the timing on BMW 3.6, 4.0, 4.4, 4.8 N62/N62TU V8 and N73 V12 engines. The kit includes camshaft setting plates, crankshaft locking pin and chain pre - tensioning tool. - Application: BMW: 540i E60/61 (05-10), 545i E60/61 (03-06), 550i E60/61 (05-10), 645i E63/64 (03-06), 650i E63/64 (05-11), 735i E65/66 (02-05), 740i E65/66 (05- 08), 745i E65/66 (02-05), 750iE65-66 (05-08), 760i E65/66 (02-08), X5 4.4 E53 (03-07), X5 4.8 E53/E70 (04-10) - Engine Code: N62/N62TU V8: B36A, B40A, B44A, B48B N73 V12: B60A
Engine Timing Tool Set For Professional Engine Repair For BMW N51/N52 0XAT1403 - Introduction: The setting and locking kit is suitable for a wide range of BMW 2.5 & 3.0 chain drive, six cylinder, twin camshaft petrol engine. The kit covers N51/N52 Valvetronic engine, and includes the Vanos alignment plate for these engines. - Application: Special design locates the camshaft in the TDC position. BMW: N51/N52 engine
Petrol Engine Setting/Locking Kit For BMW 1.6 N40/N45/N45t – Chain Drive 0XAT1413 - Introduction: Suitable for setting and adjusting the timing on 1.6 BMW N40, N45 and N45T chain drive petrol engines, and also for aligning VANOS unit on the inlet and the exhaust camshaft setting plates. - Application: BMW: 116 E81/82/87/88(04-09), 316i/ti Compact E46(01-07), 316i E90/91/92/93(05-10) Engine Code: N40, N45, N45T - (B16), B16AC
Petrol Engine Setting/Locking Kit For BMW, Land Rover, Morgan – Chain Drive 0XAT1301 Application: - Model: BMW: 530i (93-95), 540i (93-95), 535i (96-98), 535i with Vanos (97-03), 540i (96-98), 540i with Vanos (98-03), 730i (92-96), 735i (96-97), 735i with Vanos (98-02), 740i (92-98), 740i with Vanos (99-01), 840i (92-96), 840i with Vanos (96-97), X5 (99-04) Land Rover: Range Rover (02-05) Morgan: Aero 8 (00-04) - Engine Code: 3.0: 308S1 / 3.5: 358S1, 358S2 / 4.0: 408S1 / 4.6: 468S1 4.4: 448S1, 448S2, V8/448S2, Morgan M62
32