Page 1


Pressure / Fluid Tester

Diesel Engine Compression Tool Set 0XAT1960 1. For medium-size car, for nozzle holder 2. Application:ISUZU, TOYOTA, MITSUBISHI, MAZDA

Diesel Engine Compression Tool Set 0XAT1961 1. For medium-size car, for nozzle holder 2. Application: ISUZU, HINO, NISSAN, MITSUBISHI

Diesel Engine Compression Tool Set 0XAT1962 1. For large-size car, for nozzle holder 2. Application: ISUZU, HINO, NISSAN, TOYOTA,MAZDA

Diesel Engine Compression Tool Set 0XAT1963 Application: ISUZU, HINO, TOYOTA, NISSAN,MITSUBISHI, Daihatsu, MAZDA, Komatsu

Fuel Injection Pressure Test (For Japanese car) 0XAT1964 This set is for measuring the fuel pressure of computerized fuel injection equipment.

1


Pressure / Fluid Tester Fuel Oil Pressure Tester 0XAT1965 1. This product can measure the fuel oil pressure of engine (automobile) with a fuel injection device, and determine whether the fuel system is in sound condition. 2. This product is specially designed for measuring the fuel oil pressure of the fuel pumps for Toyota and Nissan electronic injection devices

Automatic Transmission Oil 0XAT1966 1. The product is a tester for accurate and rapid measurement of the automatic transmission oil pressure. 2. It can correctly determine whether there is fuel leakage, pressure leakage, poor hydraulic piston, screen blockage or other internal faults.

Fuel Injection Pressure Test (For Japanese car) 0XAT1967 This set is for measuring the fuel pressure of computerized fuel injection equipment.

Exhaust Back Pressure Kit (3-WAY) 0XAT1968 1. Enables technician to test exhaust back pressure through oxygen sensor. 2. Oxygen sensor adapter includes M12 and M18 thread. 3. The special 2-1/4 in.gauge has two multi-colored bands-idle 2500RPM,with pressure shown in PSI and bar. 4. High pressure braided stainless steel casing hose long 1.87m

2


Pressure / Fluid Tester Diesel Compression Tester 0XAT1055 1. 2-1/2" dial, glycerine filled gauge with glass lens in stainless steel housing. 2. 4,500 PSI rated nylon jackted pressure hose assembly. 3. Dual scale 0-1,000 PSI (Metric scale 0-70 Bar). 4. 13 pieces adapter set (Deere & BMW adapters includes).

Diesel Engine Compression Test Kit 0XAT1002 1. Ø60mm Gauge with heavy-duty rubber bumper, 400mm of hose and quick connector 2. Testing cars and light commercial vehicles with direct or indirect injection 3. Allows repeated on-vehicle tests 4. Includes 90° coupling adaptor for limited access applications 5. Contents: Gauge Hose &Quick Connector, Glow Plugs: M10 x 1.25, M12 x 1.25,M14 x 1.25, M10 - Long, M10 - Short Adaptor: M18 x 1.5(M) - M12 x 1.25(F) Dummy Injectors: M24 x 2.0,Stanadyne, M20 x 1.5 Glow Plug Adaptor: M10 x 1.25, M10 x 1.0, 90° Quick Coupling Elbow, Bridge Clamp & Service Kit

Diesel Engine Compression Test Kit 0XAT1009 1. For both direct and indirect diesel injected engines 2. Checks engine compression under cranking condition 3. Small profile, quick coupling adapters for speed and security 4. Built-in pressure relief valve enables repeat tests without dismantling 5. Simply & easy to use

Diesel Engine Compression Test Kit 0XAT1347 1. A 16 -1/2" wire reinforced hydraulic hose has a quick coupler on a swivel for ease of connection Dual reading gauge measures compression to 0-1000 psi and 0-70 bar. 2. Gauge has a push- buttom release valve and quick disconnect fitting on the hose end 3. Tester comes with all the necessary adapters for all GM, Isuze, Lincoln Mark VII and Continental, Ford/ Navistar, Audi, Mercedes, Peugeot, Toyata, VW and Volvo.

3


Pressure / Fluid Tester Diesel CV Compression Test Kit 13pc 0XAT1003 1. Ø60mm Gauge with heavy-duty rubber bumper, 400mm of hose and quick connector 2. Testing commercial, marine and industrial diesel engines with direct or indirect injection 3. Pressure relief valve allows repeat on-vehicle tests 3. Includes 90° coupling adaptor for limited access applications

Diesel Compression Test Kit 0XAT1252 1. Designed for medium-duty engines 2. Equipped with glow plugs 3. Dual reading gauge measures compression to 1000 PSI and 7000 kPa 4. Gauge has a push-button release valve and quick disconnect fittings on the hose end 5. Tester comes with necessary glow plug and nozzle adapters in a handy storage case. 6. Applications: - Cummins B and C - Navistar DT466/DT360 - Ford/Navistar 6.9 & 7.3L - GM 6.2L and 6.5L - Hino diesel and Mitsubishi Fuso truck engines

Diesel Engine Compression Test Kit 0XAT1316 1. Large gauge with rubber bumper, straight and right angled quick connect of Ø70mm, 70bar(1000psi) 2. Fittings a range of glow plug and injector adaptors 3. Enable to cover a range of car and van diesel engines 4. Includes twenty glow plug adaptors and five injector adaptors 5. Glow Plug Adaptors: Wide range of Alfa, BMW, Chrysler, Daewoo, Fiat, Ford, Hyundai, Izusu, Land Rover,LDV, Mazda, Mercedes, Mitsubishi, Nissan, PSA, Renault, Saab, Suzuki, Toyota, VAG, Vauxhall/Opel, Volvo Diesel Engines 6. Injector Adaptors: M20, M22, M24 & Ford Stanadyne Injectors

Diesel Engine Compression Test Kit 0XAT1317 1. As AT1316 but with additional clamp-on injector adaptors 2. Enable to cover the vast majority of car, van, truck, bus, agricultural and marine diesel engines 3. Glow Plug Adaptors: Wide range of Alfa, BMW, Chrysler, Daewoo, Fiat, Ford, Hyundai, Izusu, Land Rover, LDV, Mazda, Mercedes, Mitsubishi, Nissan, PSA, Renault, Saab, Suzuki, Toyota, VAG, Vauxhall/Opel, Volvo Diesel Engines 4. I njector Adaptors:M20, M22, M24 & Ford Stanadyne Injectors plusclamp-on injectors

4


Pressure / Fluid Tester Diesel Engine Compression / Cylinder Leakage Adaptor Kit 0XAT1318 1. Six clamp-on injector adaptors 2. Covering car, van, truck, bus, agricultural and marine injector sizes

Diesel Engine Cylinder Leakage Test Kit 0XAT1322 1. Cover the wide of modern engines 2. Including Hdi, TDCi and Pumpe Duse 3. Large Ă˜70mm, 70bar(1000psi) gauge with rubber bumper 4. Includes twenty ďŹ ve glow plug and injector adaptors 5. Cover a wide range of car and van diesel engines 6. Applications: Alfa, BMW, Chrysler, Daewoo, Fiat, Ford, Hyundai, Izusu, Land Rover, LDV, Mazda, Mercedes, Mitsubishi, Nissan, Opel, PSA, Renault, Saab, Suzuki, Toyota, VAG, Vauxhall, Volvo Diesel Engines

Master Diesel Engine Cylinder Leakage Test Kit 0XAT1323 1. As AT1322 but with addition of AT1318 Clamp-on injection adaptors 2. Cover the vast majority of car, van truck and bus, agricultural and marine diesel engines 3. Applications: Alfa, BMW, Chrysler, Daewoo, Fiat, Ford, Hyundai, Izusu, Land Rover, LDV, Mazda, Mercedes, Mitsubishi, Nissan, Opel, PSA, Renault, Saab, Suzuki, Toyota, VAG, Vauxhall, Volvo Diesel Engines

Diesel Compression Tester, 37pcs 0XAT3601 1. Common checking diesel compression tester with wide range of adapters. 2. Test process must be under vehicle cranking condition. 3. Provided high quality hydraulic gauge with modern design rubber jacket. 4. Full glow plug and injector adapters. 5. Additional clamp-on adaptors in case provide more application to Truck, Van, Bus, Marine Engine and Agricultural vehicles.

5


Pressure / Fluid Tester

Master Fuel Injection Kit 0XAT1049 1. The fuel injection test kit tests fuel injection systems on most vehicles. 2. This kit comes complete with assorted, hose barb fittings, and hose clamp to adapt to earlier vehicle models, as well as current. 3. The adapter set tests fuel injection on most vehicles, models, Accura,Honda, Hyundai,Mazda,Suzuki,Yoyota,BMW,Mercedes, Puegot,Porshe,Saab,VW,Volvo.

Fuel Injection Pressure Test Kit 0XAT1050 1. A large 3-1/2" gauge with dual readings of 0-145 psi and 0-1000 kpa 2. Low pressure 2-1/2" gauge for an accurate reading below 15 psi 3. All adapters, gauges, and hose assemblies feature a quick coupling system 4. For speedy and efficient testing connection 5. Suitable for American, Japanese and European systems of cars 6. Accura, Honda, Hyundai, Mazda, Suzuki, Toyota, Audi, BMW, Mercedes, Puegot, Porshe, Saab, VW, Volvo, Chrysler, GM, CISE Auto Repair tool

Fuel Injection Pressure Test Kit - Test Port 0XAT1054 1. Comprehensive kit of adaptors and fittings for modern Schrader test port fuel injection systems 2. Fitted with quick coupling system and safety valve to prevent inadvertent discharge of fuel under pressure 3. Supplied with large high pressure gauge reading 0-145psi and 0-1000 kPa 4. Gauge has hanging hook and protective bumper 5. Pressure release valve fitted with long drain hose allows safe recovery of fuel

6


Pressure / Fluid Tester

Fuel Injection Pressure Test Kit 0XAT1158 1. Comprehensive adapter and fitting kits for almost American, Japanese and European vehicales. Including MFI, GM TBI, and Bosch CIS system 2. Large, shock protected, easy- readying gauge with dual units reading of 0-120 psi & 0-8 bars 3. Applications: BMW, Bercedes-Benz, VW, Audi, Porsch, Ford, Chrysler, GM, Jeep, Saab, Volvo, Peugeot, Fiat, Toyota, Nissan, Mitsubishi, Honda, Mazada, Suzuki, Hyundai, etc.

Fuel Injection Tester 0XAT1348 1. Fuel Injection pressure testing kit works for most of GM throttle-body fuel injection systems. 2. It is designed for GM cars fro 1982 theu current with l ow-pressure TBI system. 3. Set includes 0-15 psi (0-1.0 bar) gauge, manifold hoses, special adapters.

Diesel Injector Nozzle Tester 0XAT1603 1. Test injection nozzles for opening pressure and leakage spray pattern 2. Complete with transparent plastic tank, filter and two connecting pipes:M12 & M14

Leak Back Test Kit - Piezo 0XAT1207 1. Test return flow fuel pressure from piezo diesel common rail injectors on Bosch,Delphi and Siemens systems 2. With two gauges, -1 to +3 bar and -1 to +15 bar 3. Sight-glass that identifies air in the fuel system and drain valve 4. Allows safe recovery of fuel

7


Pressure / Fluid Tester

Deluxe Vacuum/Fuel Pump Test Kit 0XAT1627 1. With protective rubber bumper and hanging hook 2. Checks for leaks in fuel line, vacuum chokes and heating 3. Suitable for diagnosing valve problems 4. Includes long flexible hose and adaptors 5. 3-1/2"diameter gauge, includes 3 brass fittings and 4' tubing

Diesel Injector Flow Test Kit - Common Rail 0XAT1392A 1. Measure return fuel flow on diesel injectors up to 6 cylinders vehicle. 2. Fitted with common rail injection system 3. Identifies, worn, blocked or inoperative injectors quickly and easily 4. Supplied with measurement tubes for quick test and measurement bottles for more accurate testing.

Diesel Injection Leak Back Master Kit - Bosch/Delphi/Denso 0XAT1428A 1. Measure return fuel flow on diesel injectors up to 6 cylinders vehicle. 2. Fitted with common rail injection system 3. Identifies, worn, blocked or inoperative injectors quickly and easily 4. Supplied with measurement tubes for quick test and measurement bottles for more accurate testing. 5. 24 adapters set for Bosch, SIEMENS, Delphi & Denso injectors for comprehensive coverage of common rail diesel vehicles

Injector Adaptor Set - Delphi & Denso 0XAT1429 1. Conjunction with Ellient AT1392 2. Measure fuel flow on diesel vehicles 3. Use with Delphi & Denso fuel injectors

8


Pressure / Fluid Tester Diesel Injector Flow Test Kit - Common Rail 0XAT1619 1. Measure return fuel flow on diesel vehicles up to 8 cylinders 2. Fitted with common rail injection system 3. Identifies, worn, blocked or inoperative injectors quickly and easily 4. With measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation

Diesel Injection Leak Back Master Kit - Bosch/Delphi/Denso 0XAT1620 1. Measure return fuel flow on diesel vehicles up to 8 cylinders 2. Fitted with common rail injection system 3. Identifies, worn, blocked or inoperative injectors quickly and easily 4. Contains measurement tubes for short term tests and measurement bottles for long term, more accurate evaluation 5. Suit Bosch, Delphi & Denso injectors 6. For comprehensive coverage of common rail diesel vehicles

Diesel Injection Leak Back Master Kit 0XAT1830 1. Test kit checking the return flow volumes from common rail systems for eight injectors. 2. Suitable for BOSCH, DELPHI,DENSO & VDO/SIEMENS injectors. 3. 1 plexiglass measuring container with 8 fuel-resistant. 4. 8 highly flexible hoses, each 1.2M 5. 8 highly flexible hoses, each 130mm(Ø3.3) 6. 8 highly flexible hoses, each 130mm(Ø3.2.5) 7. 8 adapters for BOSCH injectors 8. 8 adapters for DELPHI injectors 9. 8 adapters for DENSO injectors 10. 8 adapters for VDO/SIMENS injectors 11. 1 solid plastic case 12. 1 Hose clamp 13. 1 Spring 14. 1 Hook

Petrol Compression Test Kit 0XAT1001 1. Ø57mm Gauge fitted with heavy rubber bumper, 150mm hose and M14/M18 fitting 2. Scale reads from 0-20bar (0-290psi) 3. For most petrol engined cars and light commercials 4. Includes five adaptors and two thread chasers covering four plug thread sizes 5. Adaptor Sizes: M10, M12, M14, M18 6. Thread Chasers: M10 x M12, M14 x M18

9


Pressure / Fluid Tester Glow Plug Socket Set 3pcs 0XAT1052 1. These sockets have a universal joint for easy replacement and removal of all popular glow plugs. 2. Hardened & tempered chrome vanadium steel. 3. Length:72mm 4. Sizes:8mm,10mm,12mm

Engine Compression Test Kit 0XAT1097 1. For motorcycle and cars with 14mm and 18mm spark plug threads. 2. Fitted with 300mm flexible hose 3. Ø70mm large gauge easy to read scale 4. Scale: 0 - 21 bar;21.5 kg/cm²; 300psi 5. Blow off valve 6. Probe engine valve and piston rings

Petrol Engine Compression Test Kit 3pc 0XAT1174 1. Fitted with Ø65mm gauge having two scales (psi and kPa), reading from 0-300psi and 0-2000kPa 2. Includes coupling 150mm rigid stem with cone-type adaptor and 320mm flexible adaptor with 14 and 18mm screw in adaptors

Petrol Engine Compression Test Kit 0XAT1314 1. Ø60mm large gauge fitted with 250mm hose and quickconnect; Scale reads from 0-21bar(0-300psi) 2. Ø38mm small gauge w/dual readings 0-200 PSI and 0 to 14 bar 3. Includes gauge and 14mm/18mm solid short adapter, 14mm/18mm long flexible adapter, 14mm long reach adapter 4. Application: American motors, Chrysler, Ford, GM, Mitsubishi, Nissan, Peugeot porsche, Subaru, Suzuki Toyota, Jeep, Saturn, Saura, Audi, BMW, Daihatsu, Hoda, Hyundai, Infiniti, Isuzu, Jaguar, Kia, Land rover, Lexus, Mazda, Mercedes

10


Pressure / Fluid Tester

Universal Compression Test Kit 8pce 0XAT1350 1. Complete compression testing kit includes both a staight and bent adapter with rubber cones, a 4” extension, hose adapter for 14mm and 18mm spark plug holes, 10mm adapter, 12mm adapter, and 14mm long adapter 2. Comes complete with carrying case and rubber gauge protector

Petrol Engine Compression Test Kit 0XAT1351 1. Special for almost popular petrol engine from market. 2. Easy reading gauge of ø63mm panel, scale up to 300psi (20kg/cm²). 3. Contents: -130mm straight and angled testing tube with quick coupling -400mm flexible hose -4 Adapters: M10, M12, M14, M18

Petrol Engine Compression Test Kit 0XAT1351C New design of straight metal tube with coupling to connect all adapters enclosed. It will help user tight the connecter from stiff metal tube without flexing, and connect/ release the adapter perfectly. Applied for almost popular Petrol/ Gas engine among market. Easy reading gauge with dual scale up to 300psi (21kg/cm²). Contents: 1. Straight metal tube with quick coupling to fit all adapters enclosed. 2. Bend Tube with rubber head for special threads of spark plug hole out of adapters’ list. 3. 1 flexible hose with quick coupling mechanism to fit all adapters enclosed. 4. Standard adapters sets: Rubber, M10, M12, M14, M18 5. Optional adapters (sale with whole set) M8x1.0 (some marine motor or motorcycles) M16x1.5 (for FORD Triton Engine-F150)

11


Pressure / Fluid Tester Petrol Engine Compression Test Kit 0XAT1389 1. Large, Ø56mm gauge fitted with protective cover and 440mm hose 2. Scale reads from 0-25bar(0-350psi) 3. For petrol engines with 10, 12, 14 or 18mm spark plugs 4. Includes long reach adaptor for 16v and V6 engines 5. Also includes 445mm hose and quick release connector for air input

Petrol Engine Cylinder Leakage Testers - Twin Gauges 0XAT1017 1. Twin gauge manifold shows percentage of cylinder leakage and cylinder pressure. 2. Designed to detect a variety of common engine faults including: Worn piston rings, worn valves, cylinder head cracks and blown head gaskets. 3. Gauge(s) show % of cylinder leakage and cylinder pressure. 4. Supplied with 14mm Adaptor, 14mm Deep Adaptor & M18 Adaptor

Petrol Injection Pressure Test Kit - Test Port Entry 0XAT1046 1. A large, Ø90mm, 7bar(100psi) gauge fitted with protective cover 2. Accurately tests injection pressure of systems fitted with Schrader test port entries 3. Includes two connecting hoses and an Alfa/Fiat test port connector

Petrol Injection Pressure Test Kit - Single Point/Electronic 0XAT1047 1. Conjunction with AT1046 Test Kit 2. Injection pressure of single-point and electronic systems 3. A large, Ø90mm, 7bar(100psi) gauge, for single-point systems, fitted with protective cover 4. Includes five in-line banjo adaptors, tees for coupler connections, M14 and M16 threaded cone seat adaptors and tee, valve and hoses

12


Pressure / Fluid Tester

Petrol Injection Pressure Test Kit - Mechanical Systems 0XAT1048 1. Conjunction with AT1046 and AT1047 Test Kits 2. Accurately tests injection pressure of mechanical/K-jetronic systems 3. Consists of three in-line tees, ten male and female threads adaptors and spare O-rings and valve cores

Petrol & Diesel - Master Compression Test Kit 0XAT1715 1. Testing the compression on both petrol and diesel vehicles 2. Features 600psi gauge eith large rubber bumper, straight and right angled quick connect ďŹ ttings, an extensive range of spark/glow plug and injector adaptors 3. Cover modern car, van, truck, bus, agricultural and marine engines 4. Glow Plug Adaptors: Alfa Romeo, BMW, Chrysler, Citroen, Daewoo, Fiat, Ford, Honda, Hyundai, Isuzu, Jeep, Kia, Lada, Lancia, Land Rover, LDV, Mazda, Mercedes, MG, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Ssangyong, Suzuki, Toyota, VAG, V Spark Plug 5. Sizes: 10, 12, 14, 18mm auxhall/Opel, Volvo 6. Injector Adaptor: M20, M22, M24 & Ford Stanadyne Injectors plus Clamp-On Injectors

Petrol & Diesel Engine Compression and Leakage Test Kit 0XAT3602 1. Additional pressure gauge for references on pressure during the operation (0-7 Bar). 2. Glow Plug Adaptors: Wide range of Alfa, BMW, Chrysler, Daewoo, Fait, Ford, Hyuidi, Izusu, Land Rover, LDV,Mazda, Mercedes, Mitsubishi, Nissan, Opel, PSA, Renault,Saab, Suzuki, Toyota, VAG, Vauxhall, Volvo diesel engines. 3. Spark plug size : 10 , 12 , 14 , 18mm. 4. Injector: M20, M22, M24 & Ford Stanadyne injector plus clamp-on injector.

13


Pressure / Fluid Tester Petrol & Diesel Engine Compression Test Kit 0XAT3603 1. Included clamp-on injector adaptors, 0-60 Bar (800 PSI)gauge with rubber bumper, straight and right angled quick connect fitting and an extensive range of glow plug and injector adaptors enable this kit to cover the vast majority of car, van, truck, and bus, agricultural and marine diesel engines. 2. Glow Plug Adaptors: Wide range of Alfa, BMW, Chrysler,Daewoo, Fait, Ford, Hyuidi, Izusu, Land Rover, LDV, Mazda, Mercedes, Mitsubishi, Nissan, Opel, PSA, Renault,Saab, Suzuki, Toyota, VAG, Vauxhall, Volvo diesel engines. 3. Spark plug size : 10 , 12 , 14 , 18mm. 4. Injector: M20, M22, M24 & Ford Stanadyne injector plus clamp-on injector.

Oil Pressure Gauge Set 0XAT1043 1. Use on diesel and gasoline engines. 2. Includes standard and metric adaptors for most popular domestic and import cars, trucks, tractors and stationary engines. 3. Features bright, easy-to-read gauge with green protective boot. 4. 0-100 PSI (0-700kPa) Gauge assembly. 5. Contents:Hose assembly. 6. Adaptor(1/8-27 to 1/4-18); Adaptor(1/8-27 to 3/8-18); Adaptor(1/8-27 to 1/4-28BSPT); Adaptor(1/8-27 to M10-1.0); Adaptor(1/8-27 to M12-1.5); Adaptor(1/8-27 to M14-1.5) 7. Street Elbow 8. 2" Large Nipple 9. Coupling

Oil Pressure Test Kit 12pc 0XAT1004 1. Ø63mm Gauge fitted with heavy-duty cover 2. Tests oil pump pressure and also low oil warning devices 3. Fitted with quick coupling adaptors and 1200mm of hose 4. Includes 90° coupling adaptor for limited access applications 5. Adaptors: R1/8" DIN 2999, 1/8" x 27NPT, 1/4" x 18NPT, 3/8" x 20UNF, 1/2" x 20UNF, M10 x 1.0, M12 x 1.5, M14 x 1.5, M16 x 1.5, M18 x 1.5mm, 90° Elbow 6. Applications: Alfa, Audi, BMW, Citroen, Daihatsu, Fiat, Ford, Honda, Hyundai, Isuzu, Jaguar, Lada, Lancia, Land Rover, MAN, Matra, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Skoda, Subaru, Suzuki, Toyota, Vauxhall/Opel, VW, Volvo

14


Pressure / Fluid Tester

Engine Oil Pressure Tester 0XAT1044 1. Check engine oil pressure in both cars and trucks 2. Dual scale gauge for easy reading 3. Complete with 24" (600mm) of oil proof hose and 1/8"NPT 4. 1/4" NPT and 3/8" NPT adaptors included 5. Dual units of reading: 0 to 300psi (0 to 21bar) 6. Gauge diameter: 2.5" (63.5mm)

Oil pressure Test kit 0XAT1045 1. Testing engine oil pressure at the oil filter on passenger cars and light trucks 2. Included for both domestic and imported engines 3. Gauge range 0-100PSI

Carburetor Synchronizer Tool Kit (Vacuum & Pressure) 0XAT1058 1. The most comprehensive balancer sets available on the market for synchronous measurement at 2 to 4 carburetors, suitable for cars and motorcycles. 2. Synchronously test allows connection of the watch according to the carburetor, the measurement of the negative pressure in the intake system 3. Enabling to hold vacuum values 4. With set of long and short carburettor adaptors 5. For access amongst the tubes and wires around the carburettor 6. Contents: 4 - 3 1/2" synchronizer gauges with fixed plate; Maximum Vacuum: 76cmHg 4 - Rubber hose 8×5×750mm 4 - Long Adaptors M5×0.8×169mm 4 - Medium Adaptors M5×0.8×100mm 1 - Short Adaptors Ø6×55mm 4 - Short Adaptors M6×0.75×53mm 4 - Short Adaptors M6×1.0×60mm

Cooling System Tester Set 0XAT1581 1. For timing 1.8/2.0 Valvetronic chain drive petrol engines 2. Align the twin vanos units 3. Applications: BMW; 118/120 E81 E82 E87(04-09), Z4 E85 E86(04-09), 318/320 E90 E91 E93 (05-09), X3 E83 (05-09), 316/Compact E46 (01-05), 318/Compact E46 (01-07)

15


Pressure / Fluid Tester Gear Oil Pressure Gauge for Benz 0XAT1910 Special design for gear oil pressure of Mercedes Benz.

Universal Transmission And Engine Pressure Tester Set 0XAT1911 1. Dual gauge design for testing on automatic transmission shifting and engine pressure. Practical 4 meter hose allow to visual the test result when conducting the road test. 2. Application: All vehicles with ZF or GM automatic transmissions. 3. Mercedes Benz 720.1, 722.0, 722.1, 722.2, 722.3, 722.4,722.5, 722.6 4. Dual Gauges: 100PSI and 400PSI 6. Gasoline hose ×4 Adapters × 16 Washer × 4

Carburetor Synchronizer Tool Kit (Mini-Type) 0XAT1100 1. The most comprehensive balancer sets available on the market 2. Features a bank of four mini-gauges with lockable valves enabling to hold vacuum values 3. Contents: 4 - 2" synchronizer gauges with fixed plate; Maximum Vacuum: 76cmHg 4 - Rubber hose 8×5×950mm 4 - Long Adaptors M5×0.8×169mm 4 - Medium Adaptors M5×0.8×100mm 4 - Short Adaptors M5×0.75×53mm 1 - Short Adaptors Ø6×55mm 4 - Short Adaptors M6×0.75×53mm 4 - Short Adaptors M6×1.0×60mm

Multi-Purpose Cooling System Test Kit (21pcs) 0XAT3060 1. Designed for testing leaks in cooling system with including: Pressure test (leaking test), Temperature sensor test, Water pump, Thermostat and Cooling fan condition tests. 2. Digital LCD reader to provide easy reading. 3. Contents: Nylon pressure pump x 1 Digital detector x 1 Coolant flow pipe x 1 Rubber pipe x 4 Step adapters x 2 Female coupling x 1 Hose clamp driver x 1 Hose clamps x 8 Coolant hose x 1 Release hose x 1

16


Pressure / Fluid Tester Universal Radiator Pressure Tester Kit 0XAT1159 1. Contents & Applications:Needle thermometer. 2. Manual pump with quick joint & release valve 3. Universal adapter with 3 rubber rings Japanese R123 adapter, suitable for Mercedes, GM & Jeep 4. Japanese R134 adapter, suitable for Peugeot, Subaru, Chrysler, Acure, GM,Mitsubishi, Nissan, Mazda,Toyota, Infiniti, Geo, Suzuki, Isuze & Ford 5. Japanese R125 adapter,suitable for Honda,Toyota, Suzuki, Mitsubishi, Chrysler & Acura

Cooling System Pressure Test Kit 0XAT1200 1. Suitable for cooling system on most cars, light commercial trucks and even marine applications 2. Fit eliminates the need for multiple adapters 3. Applications: GM 4 cylinder, truck,Mercedes-Benz, Ford, Chrysler, Jeep, Peugeot,Acura, Dodge, Eagle, Honda, Isuzu,Lexus, Mazda, Mitsubishi,Toyota, Infiniti,Nissan

Radiator Cone Set 3pc 0XAT1166 1. Suitable for radiator or expansion tank. 2. Used when filling cooling systems 3. Consisting of three rubber cones with functional diameters: Ø17mm-31mm; Ø24mm-39mm; Ø34mm-50mm

Cooling System Vacuum Purge & Refill Kit 0XAT1246 1. Refilling radiators with coolant mix without introducing air pockets 2. Complete with adaptors for most modern cars 3. Adaptor sizes:35mm / 39mm / 44mm / 48mm diameter 4. Adaptors expand by approximately 4mm

Cooling System Filters 0XAT1260 1. Automatically conducts system leak test. 2. Eliminates the introduction of bubbles and air-locks into the cooling system and dramaticaly reduces system filling time. 3. Low profile design broadens application range especially for use on MPVs where lower windscreen lip might obstruct other tools.

17


Pressure / Fluid Tester Universal Radiator Pressure Tester Kit 0XAT1261 Contents & Applications: 1. Needle thermometer 2. Manual pump with quick joint & release valve 3. Universal adapter with 3 rubber rings 4. Japanese R123 adapter, suitable for: Mercedes, GM & Jeep. 5. Japanese R134 adapter, suitable for: Peugeot, Subaru,Chrysler, Acure, GM,Mitsubishi, Nissan,Mazda, Toyota, Infiniti,Geo, Suzuki, Isuze& Ford 6. Japanese R125 adapter, suitable for: Honda, Toyota,Suzuki, Mitsubishi,Chrysler & Acura

Cooling System Filler 0XAT1260HB Contents & Applications: 1. Needle thermometer 2. Manual pump with quick joint & release valve 3. Universal adapter with 3 rubber rings 4. Japanese R123 adapter, suitable for: Mercedes, GM & Jeep. 5. Japanese R134 adapter, suitable for: Peugeot, Subaru,Chrysler,Acure, GM,Mitsubishi, Nissan,Mazda, Toyota, Infiniti,Geo, Suzuki, Isuze& Ford 6. Japanese R125 adapter, suitable for: Honda, Toyota,Suzuki, Mitsubishi,Chrysler & Acura

Radiator Pressure Tester Kit 0XAT1119 1. A comprehensive kit suitable for testing pressure in radiators and other coolant systems. 2. Includes,stainless pressure gauge assembly, automatic inlet-air pressure tester, color coded adaptors for most modern vehicles Radiator test/coverter caps.

Radiator Pressure Tester Kit 0XAT1170 1. Heavy-duty pressure test kit. 2. Aluminium radiator header tank caps are colour coded 3. Ease of use and have quick release fittings 4. Suitable for wide range of vehicle applications. 5. Locate system leaks from: Head gasket; Header tankRadiator and heater cores; Water pump, plugs,hoses and housings 6. Heavy-duty pump unit features smooth action and large, easy-to-read, scale. 7. Long hose aids easy use of the gauge and quick release is fitted with pressure release valve for safe operation 8. Supplied with thermometer Radiator Pressure Test Kit 9. Applications: Alfa Romeo, Audi, BMW,Citroen, Fiat, Ford, Isuzu, Jaguar, Jeep, Lexus,Mazda, Mercedes,Mitsubishi, Nissan, Peugeot, Renault,Rover, Saab, Subaru,Suzuki, Toyota, Vauxhall/Opel,Volvo, VW

18


Pressure / Fluid Tester Radiator pressure tester & Vacuum-type cooling system kit (25pcs) 0XAT3313C 1. Detecting leakage from radiator system externally/ internally 2. Color-coded radiator testing cap for quick choosing 3. The hand pump creates of vehicle-speciďŹ c adapter on the radiator or expansion tank will pressurize the system and can check tightness by pressure - due to excess pressure in the system can be as a loss of pressure leaks are found by visual inspection 4. Applications: Almost vehicles among market 5. Contents: 1 x Vacuum Pump & Body 1 x Thermometer 1 x Cone Shape Rubber Adapter 1 x Coolant Hose 1 x Nylon Pressure Pump 3 x Test Caps 1 x Black Connecter R123/ R124 14 x Color Code Adapter 1 x Blue Connecter R123/ R125 1 x Radiator Adapter Wrench

Radiator Pressure Tester Set 25pcs 0XAT1386A 1. Comprehensive set with latest adaptors for BMW, Vauxhall Opal & Toyota. Test for cooling system/engine issues via easy read dial indicator, & hand pump. 2. Applications: VAG, Mercedes, BMW,Fiat, Ford, Citroen, Peugeot, Renault, Vauxhall Opal, Suzuki, Toyota, Volvo, Saab, Honda.

Vacuum Pump & Brake Bleeding Kit 0XAT2001 1. For testing automatic transmission, vacuum modulators, vacuum reservoirs, air conditioning & heating heater cores, also brake systems, power brake system. 2. Contents: - 1 PC Vacuum pump (0~ -30 in Hg) - 2 PCS 600mm connection hose - 1 PC 200ml uid reservoir bottle - 2 PCS Fluid transfer and storage lids - 1 Set connection accessories rubber cupped adapters - 2 PCS 75mm accessory hoses - 2 PCS 95mm accessory hoses

19


Pressure / Fluid Tester Vacuum & Pressure Test/Brake Bleeding Kit 0XAT2029 1. Professional vacuum/pressure diagnostic tool helps identify a variety of faults on vehicle systems including fuel, ignition, transmission, emission and air conditioning/heating. 2. Kit also includes reservoirs, hoses and adaptors for bleeding brake and clutch systems. 3. Features lightweight aluminium body with simple twist function for choice of pressure or vacuum testing. 4. Large rubber easy-to-read gauge. 5. Contents: Vacuum Pump, 2 x Fluid Container, Transfer Cap, Vacuum Hoses; 2 x 80mm, 2 x 95mm, 2 x 600mm, 19 x Assorted Connectors & Blanking Caps

Swivelable Gauge Brake Bleeding Kit 0XAT1909 1. One piece diecasting rigid body includes front handle and cylinder to increase better strength than 2 pieces. 2. Swivelable gauge to help user reading scales in any position. 3. Includes fittings and accessories for vacuum testing and brake bleeding, plus a detailed owners manual. 4. The vacuum pump is field repairable. Replace worn o-ring, seals and valves with the Vacuum Pump Repair Kit.

Vacuum Tester & Brake Bleeding Kit 0XAT2063 1. Used to test a variety of essential engine and associated functions including fuel, ignition, transmission and emissions. 2. Includes reservoir, hoses and adaptors for bleeding brake, clutch systems on cars, commercials and motorcycles. 3. Brass-bodied vacuum pump features large, easy-to-read vacuum gauge calibrated in inches and millimetres of mercury 4. Contents: Vacuum Pump, Fluid Container, Transfer Cap, Vacuum Hoses; 2 x 580mm,2 x 80mm, 5 x Assorted Vacuum Hose Fittings, 3 x Bleed Nipple Adaptors

Cylinder Pressure Tester Kit - Brake and Clutch 0XAT2030 Set includes: 45° & 90° adapters

Pressure Gauge 0-3000psi

11pc of Cylinder Adapters:

20

10x1.0/Concave 12x1.0/Bubble 1/2x20/Concave

10x1.0/Bubble 11x1.5/Bubble 9/16x20/Concave

9/16x8/Concave

10x1.25/Bubble

3/8x24/Concave 13x1.5/Bubble 1/16x24/Concave


Pressure / Fluid Tester Exhaust Back Pressure Test Set 0XAT1349 1. This set is to test exhaust back pressure through oxygen s ensor adapter, incldes M12 and M18 thread. 2. The special 2-1/4" gauge has two multi-colored bands for idle and 2500 RPM, with pressures shown in PSI and bar.

Deluxe Brake Pressure Test Kit 0XAT2049 1. Features two 3,000-psi gauge assemblies 2. Dual scale dial - standard scale 0-3,000 psi and metric scale 0-200 kg/cm 3. 4,500 psi rated pressure hose assembly 4. Include 22-piece adapter set

Oil Pressure Test Kit 0XAT1934 1. Provides quick and accurate engine oil pressure for both gasoline and diesel engines, passenger cars and light trucks. 2. Can also be applied to check automatic transmission pressures 3. Inclides a gauge reading from 0 to 150 psi connected with a hose, which can withstand up to 200 psi, a quick test clamp, and 10 adapters.

Brake and Clutch Cylinder Pressure Test Master Kit 0XAT2032 1. Adapters install directly into master cylinder line access holes. 2. Measures pressure at front or back of master cylinder. 3. Comes with complete line of adapters, gauge assembly, a complete instruction manual and vehicle look-up table. 4. Ă˜57mm pressure gauge 0-3000 PSI is accurate to 4% of scale. 5. Quick disconnect for easy connection. 6. Complete adapter line with annual updates oered as needed

Vacuum Cooling System FilIer Kit 0XAT1010 1. Precision straight edge for alignment of cylinder heads when refacing. 2. Suitable for engineers and automotive technicians.

21


Pressure / Fluid Tester Injector Check for Common Rail Injectors Kit 0XAT1211 1. The injector check investigates both the absolute and relative amounts of fuel return, and additionally allows long-term measurements. 2. Common-rail-injectors achieve their effect, the optimal spraying, through high pressure (up to 2100 bar) and finest injection openings. 3. The Injector Check has a scale and floater that enable simple reading of the permanent measurement and greatly facilitate the diagnosis for the user. 4. Dual reading gauge measures compression to -1~15 bar and - 760~40 psi.

Universal Radiator Pressure Test Kit 0XAT1411 1. The adapter's expandable rubber body allows user to connect to most Automotive Cooling. 2. Systems without the need for additional costly adapters. 3. User can perform pressure testing and cooling system diagnostics simultaneously. 4. 0-35psi, color-coded gauge, and pressure release valve, plastic carrying case.

Back Pressure Test Kit 0XAT1935 Contents: Gauge (reading from 0~20 PSI) Steel wire tube (Teflon) Heat-resistant: over 280C Special adaptor (available for some Toyota & Mitsubishi) Oxygen sensorwasher Universal Steel adaptor Hex adjustable nut

Cylinder Head Leakage Tester 0XAT1175 1.Diagnose blown gaskets and cracked blocks and cylinder heads easily and quickly. 2. Checks for CO2 in cooling system and indicates its presence by Test fluid colour change.

22


Timing Tools - ALFA ROMEO Timing Assortment

For Alfa Romeo, Fiat, Ford,Lancia, Suzuki, Opel 1.3 Jtd/Cdti/ Ddis/Tdci 0XAT1390 Application: - Model: Alfa Romeo: Myth (08-12) Fiat: 500 (07-12), Doblo /Charge (04-10), Fiorino (08-11), Large Point (05-11), Idea (04-11), Line (07-11), Panda (03-11), Point (03-11), Point Evo (09-12), Qubo (08-11), Strada Pickup (06-13) Ford: Ka (09-12) Lancia: Musa (04-11), Ypsilon (03-11) Suzuki: Ignis (03-09), Splash (08-11), Swift (06-10), Wagon R + (03-08) Opel: Agila (03-08), Agila-B (08-10), Astra-H (04-11), Astra-J (09-12), Combo-C (03-12), Corsa-C (03-07), Corsa-D(06-12), Meriva-A (04-10), Meriva-B (10-11), Tigra-B (04-10) - Engine Code: Alfa Romeo: 199A3.000, 199B1.000 Fiat: 169A1.000, 169A5.000, 188A8.000, 188A9.000, 199A2.000, 199A3.000, 199A9.000, 199B1.000, 199B2.000, 223A9.000, 263A2.000 Ford: 169A1.000 (FD4) Lancia: 188A9.000, 199A2.000, 199A3.000, 199B1.000, 843A2.000 Suzuki: Dimension, Z13DT, Z13DTJ Opel: A13DTC, A13DTE, A13DTR, Dimension, LDV/A13DTC, Z13DTJ LSF/A13DTE, Y13DTH, Z13DT, Z13DTH, Z13DTI, Z13DTR

Engine Timing Tensioner Kit For Most Petrol And Diesel Engines 0XAT1539 1. Introduction: A comprehensive range of the tension lever and the wrench require for changing the cam belt on most popular petrol and diesel engines. 2. Application: Model: Alfa Romeo, Fiat, Citroen, Peugeot, Renault, Volkswagen

Engine Timing Tensioner Kit For Most Petrol And Diesel Engines 0XAT1846 Application: Model: Alfa Romeo: MiTo (2012-2015) Fiat: 500/500C (2010-2015), Panda (2012-2015), Punto (2012-2015) Lancia: Ypsilon (2011-2015) Engine Code: 0.9 Twin Air Turbo: 312A2.000

23


Timing Tools - ALFA ROMEO Timing Kit For Alfa Romeo Twin Spark 1.4/1.6/1.8 & 2.0 16v Twin Cam 0XAT1550 Introduction: The kit includes setting plates for locking the camshaft in the timed position. Setting plates are positioned in the place of the camshaft bearing cap. The kit also includes tensioning tool and balance shaft tensioner. Application: 1.4/4.6 Engine (Purple Setting Plates): 145/146/155/156 (96-01) 1.8 Engine (Blue Setting Plates): 145/146 (96-01), 155/156 (96-06), Spider/GTV (98-01) 2.0 Engine (Blue Setting Plates): 145/146 (96-01), 147(01-07), 155/156 (95-02), 166 (98-01), Spider/GTV (96-03)

Petrol engine setting / locking master kit for alfa romeo/fiat/lancia – belt drive 0XAT1083 Application: Model & Engine Code: Fiat: Bravo, Brava Lancia: Y10 (85 on) 1.4 12v, 5 cyl. VIS (96 on) 2.0 20v, 4 cyl. VIS 2.0, Delta Fiat: Coupe, Barchetta 1.8 16v 130 bhp, Bravo, Brava, Marea 1.4/1.6 16v, Coupe, Barchetta, Punto, HGT 1.8 16v 132 bhp Alfa Romeo: 145/146/155/156 (96-01) 1.8/2.0 16v & 1.4 16v Step A, 145/146/155 1.6 105 bhp, 147 1.6 105 bhp, 147/156/166/GTV/ Spider GT2.0 16v 165 bhp, 147 1.6 Eco 103 bhp -1.8: 145/146 (96-01) 1.8/2.0 16v, 155/156 (96-06) Spider/GTV (98-01) -2.0: 145/146 (96-01) 147 (01-07), 155/156 (95-02), Spider/GTV (96-03), 166 (98-01)

Engine Timing Tool Set For Alfa Romeo/Fiat/Lancia 0XAT1650 Introduction: Repair to the cylinder head or the engine when replacing a timing belt. The set is needed to determine the top dead center point of cylinder 1 on the working stroke, to hold the camshaft in this position and to permit the adjustment of the tensioning pulley. Application: Suitable for: Alfa Romeo vehicle with 1.4, 1.6, 1.8, 2.0, 3.0L 4 and 6 cylinder engines on Alfa Romeo 145, 146, 147, 155, 156, 164, 166, GTA, GTV, Spider GT Fiat / Lancia vehicle with 1.2, 1.4, 1.6, 1.8, 2.0L 4 and 5 cylinder engines on Fiat Panda, Punto, Palio, Siena, Bravo, Brava, Stilo, Marea, Multipla, Barchetta, Coupe, Lancia Dedra, Delta, Kappa, Lydra

24


Timing Tools - ALFA ROMEO Set Depth For Alfa Romeo, Fiat, Opel 1.9 Jtd 16v Multi – Jet 0XAT1665 - Introduction: To adjust the engine timing when changing of the timing belt or the repair in the cylinder head. - Application: Model: Alfa Romeo: 1.9, 2.4 L Diesel Fiat: 1.9 and 2.4 L Diesel Opel: 1.9 CDTi Alfa Romeo: 323.02, 371.01, 342.02, 325.01 362.02, 182B9.000, 937A2.000, 937A3.000, 192A5.000, 192B1.000, 937A4.000, 937A5.000, 939A2.000, 939A1.000, 939A7.000, 939A8.000, 839A6.000, 841C.000 Fiat: 182B4.000, 182B9.000, 185A6.000, 186A6.000, 186A8.000, 186A9.000, 188A2.000, 188A7.000, 188B2.000, 192A1.000, 192A3.000, 192A5.000, 192A8.000, 192A9.000, 192B4.000, 192B5.000, 198A2.000, 198A3.000, 198A6.000, 199A5.000, 223A7.000, 937A5.000, 939A1.000, 939A2.000, 939A3.000, 939A7.000 Opel: Z19DT, Z19DTH, Z19DTJ

Engine Timing Tool Set For Alfa Romeo/Fiat/Lancia 0XAT1668 - Introduction: Repair to the cylinder head or the engine when replacing a timing belt. The set is needed to determine the top dead center point of cylinder 1 on the working stroke, to hold the camshaft in this position and to permit the adjustment of the tensioning pulley. - Application: Alfa Romeo vehicle with 1.4; 1.6; 1.8; 2.0; 3.0L 4 and 6 cylinder engines Alfa Romeo: 145, 146, 147, 155, 156, 164, 166, GTA, GTV, Spider GT Fiat/Lancia vehicle with 1.2; 1.4; 1.6; 1.8; 2.0L 4 and 5 cylinder engines Fiat: Panda, Punto, Palio, Siena, Bravo, Brava, Stilo, Marea, Multipla, Barchetta, Coupe Lancia: Dedra, Delta, Kappa, Lydra

Alfa Romeo / Fiat Timing Tool Set 0XAT1677 Application: Suitable for Alfa Romeo twin spark petrol engine 1.4, 1.6, 1.8, 2.0 and 2.0 JTS (Engine Code:335.03, 321.02, 321.03, 321.04, 372.03 [105 PS], 676.01, 322.01, 322.05, 671.06, 162.01, 323.01, 323.10,341.03, 363.01, 672.04, 932A2.000, 937A1.000) Alfa Romeo 145, 146, 147, 155, 156, 166, Spider, GTV, GT and Fiat 1.8 16v twin cam petrol engines, 2.0 20v, 2.4 20v. (Engine Code:182A2.000, 183A1.000, 183A6.000, 188A6.000, 192A4.000, 175A3.000, 182.A1.000, 183B3.000, 182B7.000, 192A2.000) e.g. Punto, Brava, Bravo, Marea, Weekend, Barchetta, Coupe, Stilo.

25


Timing Tools - ALFA ROMEO Diesel Engine Setting/Locking Tool Kit For Alfa Romeo/Fiat/Lancia – 1.6d, 1.9d, 2.0d, 2.4d – Jtd/Multi – Jet (Belt) 0XAT1499 - Introduction: Suitable for setting and locking on Alfa Romeo, Fiat and Lancia completed range of 1.6D, 1.9D, 2.0D JTD and Multijet engines as well as 2.4D 10v and 20v JTD. The kit contains flywheel holding tool to remove/install crankshaft locking tools and camshaft tools. - Application: Model: Alfa Romeo: 145 (98-01), 146 (98-01), 147 (01-10), 156 (97-08), 159 (05-10), 166 (98-08), Brera (05-09), Crosswagon (04-08), Guilietta (10-12), GT (04-10), MiTo (08-12), Spider (06-09) Fiat: Brava/Bravo (98-02), Bravo (07-12), Croma (05-11), Doblo/Cargo (02-10), Grande Punto (05-10), Idea (04-12), Linea (07-11), Marea/Weekend (99-03), Multipla (99-11), Palio Weekend (02-06), Punto (09-12), Punto Evo (09-12), Sedici (06-09), Stilo (01-08), Strada Pick-Up (03-06), Sedici (06-09), Stilo (01-08), Strada Pick-Up (03-06) Lancia: Delta (08-12), Kappa (98-02), Lybra (99-07), Musa (04-12), Thesis (02-07) Engine Code: 1.6D JTD/M: 198A2.000, 198A3.000, 198A6.000, 350A2.000, 350A3.000, 940A3.000, 955A3.000, 955A4.000 1.9D JTD/M 8v: 323.02, 371.01, 182B4.000, 182B9.000, 186A6.000, 186A8.000, 186A9.000, 188A2.000,188A7.000, 188B2.000, 192A1.000, 192A3.000, 192A8.000, 192A9.000, 192B4.000, 192B5.000, 199A5.000, 223A7.000, 223B1.000, 937A2.000, 937A3.000, 939A1.000, 939A7.000, D19AA 1.9D JTD/M 16v: 192A5.000, 192B1.000, 844A1.000, 937A4.000, 937A5.000, 937A6.000, 939A2.000, 939A8.000 2.0D JTD/M: 844A2.000, 940A4.000, 940A5.000 2.4D JTD 10v: 325.01, 342.02, 185A6.000, 838A8.000, 839A5.000, 839A6.000, 841C.000 2.4D JTD 20v: 841G.000, 841H.000, 841M.000, 939A3.000, 939A9.000

Lancia/Alfa Romeo 1.75 Tbi - Engine Timing Tool Kit 0XAT0704 - Introduction: It designs for 4 cylinder the twin camshaft turbo charged engine. - Application: Manufacture Model Lancia Delta 159 | Brera Alfa Romeo Giulietta Spider

26

CC

Engine Code

1.75

939B1.000 940A1.000

Year 2009 to 2015 2009 to 2012 2010 to 2015 2009 to 2011


Timing Tools - ALFA ROMEO Petrol Engine Setting/Locking Kit For AlfaRomeo, Fiat, Lancia 1.2 16v, 1.4 16v, 1.4t – Jet – Belt Drive 0XAT1870 - Introduction: This kit contains the timing tool required to cover the belt replacement procedure for the both early and later variant of the engine, it includes piston height gauge, camshaft and crankshaft tools, tensioner adjuster, and camshaft sprocket locking tool. This Fiat range of 1.2 16 valve petrol engine was first introduced as long ago as 1997 in the Punto, and a number of variant releases including 1.4 range of 16 valve/T-Jet engine. The majority of these engines use the same timing tool combination and procedure for the timing belt replacement. However, engine code 192B2.000, 198A1.000, 198A4.000, 199A6.000 and 199A8.000 require an additional tool to ‘lock’ the camshaft sprocket, which engine code 169A3.000 requires a different tool combination and has a slightly different procedure. All the timing tools are included in 0XAT1870. Dependent upon the engine component which requires removal to gain accessed to the timing belt, such as the right hand front wheel, the air filter, the radiator grille, the timing belt covers, the auxiliary belt, the fuel rail/ injectors and the spark plug. - Application: Model: Alfa Romeo: Giulietta (10-12), MiTo (08-12) Fiat: 500 (07-12), Bravo (07-12), Brava/Bravo (98-02),Stilo (01-08), Grande Punto (07-10), Grande Punto Abarth (07-10), Idea (04-12), Linea (07-10), Marea/Weekend (98-00), Palio Weekend (01-06), Panda (07-11), Punto (97-08) Lancia: Delta (08-12), Musa (04-12), Ypsilon (96-11) Engine Code: 1.2 16v: 176B9.000, 182B2.000, 188A5.000 1.4 16v/T-Jet: 169A3.000, 192B2.000 198A1.000, 198A4.000, 199A6.000, 199A8.000, 843A1.000

27


Timing Tools - BMW Diesel Timing Kit For Bmw, Land Rover, Rover & Mg 2.0/3.0 0XAT1515 - Introduction: Camshaft aligning and ywheel timing tools cover BMW, Land Rover, Rover & MG vehicles ďŹ tted with 2.0 and 3.0 chain drive diesel engines, and also include tensioner locking pins. - Application: This set enables the correct timing to be made when servicing BMW M47 2.0 16 engine. Model: BMW: 318d (E46) 20 4D 1 M47 (00-05), 320d (E46) 20 4D 1 M47 (98-02), 330d (E46) 30 6D 1 M57 (99-03), 525d (E39) 25 6D 1 M57 (99-04), 530d (E39) 30 6D 1 M57 (98-03), 730d (E38) 30 6D 1 M57 (98-02), X5 3.0d (E53) 30 6D 1 M57 (00-03) Land Rover: Freelander TD4 204D3 M47R (00-06), Range Rover TD6 3.0 M57 (02-06) Rover/MG: 75 CDT/CDTi M47R (99-05), ZT/T 2.0 M47R (01-05)

Timing Kit For Bmw, Land Rover & Vauxhall, Opel 0XAT1312 - Introduction: A comprehensive kit designs for setting the camshaft and the crankshaft timing position and suitable for 1.8, 2.0 & 2.5 chain drive diesel engines. Timing chain compressor, timing chain tensioner locking pins, injection pump sprocket puller, injection pump lever and crankshaft holding tool are also included. - Application: Model: BMW TD/TDS: 318E36 (94-99), 318E36 Compact (95-00), 325E36 (91-99), 525E34 (91-96), 525E39 (95-03), 725E38 (96-02) Range Rover TD5/P38: 2.5D (94-02) Vauxhall/Opel D: Omega-B 2.5 (94-01) Engine Code: 174T1, 256T1, 256D, 25DT, X25DT

Engine Timing Tool Set For Bmw 0XAT1098 - Introduction: This comprehensive set of tool enables the correct timing position to be achieved on the both camshaft and crankshaft whilst replacing the timing belt or the chain on the both petrol and diesel engines. Include a special wrench for controlled turning of the exhaust camshaft sprocket when removing and installing the VANOS unit, and also include the primary timing chain pre - load tool for tensioning the timing chain on M50, M52, M42 and M60 engines.

- Application: M22 Threaded for M42/M60 engine; M26 Threaded for M50/M52 engine Manufacture BMW

BMW (Diesel) Opel Omega Range Rover

28

Model 316i | 318i | 518i 316iS | 318Ti | 320i 323i | 325i | 328i | 520i 523i | 525i | 528i 325 | 525 325 | 525 325 | 525

Style

Engine Code M40 | M43 M42 | M44 M50 | M52

M51 2.5 TD 2.5 DT/SE

Year 1988-1993 1991-1999

1996-1999 1994-2002 1994-2002


Timing Tools - BMW Engine Timing Tool Set For Bmw 0XAT1551 - Application: 1. M22 Threaded for M42/M60 engine; M26 Threaded for M50/M52 engine 2. This set enables the correct timing to be made when service BMW M47 2.0 16 engine. E46 318D, 320 D, 330D; E39 520D, 525D, 530D; E38 730D Model: BMW: 318d (E46) 20 4D 1 M47(00-05), 320d (E46) 20 4D 1 M47(98-02), 330d (E46) 30 6D 1 M57(99-03), 525d (E39) 25 6D 1 M57 (99-04), 530d (E39) 30 6D 1 M57 (98-03), 730d (E38) 30 6D 1 M57 (98-02), X5 3.0d (E53) 30 6D 1 M57 (00-03) Land Rover: Freelander Td4 204D3 M47R (00-06), Range Rover Td6 3.0 M57 (02-06) Rover/MG: 75 CDT/CDTi M47R(99-05), ZT/T 2.0 M47R(01-05)

Engine Timing Tool Set For Bmw M42 / M44 / M50 / M52 / M54 / M56 0XAT1473 Application: E30: 318iS 16v Bj. 89-91 (M42) E34: 518i Bj. 94-96 (M43), 520i Bj. 89-96, 525i Bj. 89-96, 525i Bj. 89-96 Single Vanos E36: 316i Bj. 93-99, 318iS/Coupe Bj. 92-98, 318i Bj. 93-99 (M43), 318ti compact Bj. 94-98 (M42), 318iS/Coupe Bj. 96-99, 318ti compact Bj. 96-01 (M44), 320i Bj. 98-06 twin Vanos (M52), 323i Compact Bj. 95-01-Single Vanos, 325i bj. 91-97, 325i Bj.91-97 Single Vanos E38: 328i Bj. 95-99 Single Vanos, 728i Bj. 95-98 Single Vanos, 728i Bj. 98-02 Twin Vanos E39: 520i Bj. 95-99 Single Vanos, 520i Bj. 98-03 Twin Vanos, 523i Bj. 95-99 Single Vanos, 523i Bj. 98-01 Twin Vanos, 525i Bj. 00-03 Twin Vanos, 528i Bj. 96-00 Single Vanos, 528i Bj. 96-01 Twin Vanos (M52), 530i Bj. 00-03 Twin Vanos E43: 520i Bj. 89-96 Single Vanos E46: 316i Bj. 99-04, 316i Compact Bj. 94-01 (M43), 318i Bj. 98-04 (M43), 320i Bj. 98-06 Twin Vanos (M52), 323i Compact Bj. 95-01 Single Vanos, 323i Bj. 98-01 Twin Vanos (M52), 325i Compact Bj. 00-06 Twin Vanos, 328i Bj. 98-01 Twin Vanos, 330i Bj. 00-06 Twin Vanos E53: X5-3.0I Bj. 99-05 Twin Vanos (M54), Z3-1.8i Bj. 96-99, 1.9i Bj. 99-03 (M43/M44), 2.0i Bj. 99-03 Twin Vanos (M52), 2.2i Bj. 00-03 Twin Vanos (M52), 2.8i Bj. 97-99 Single Vanos, 2.8i Bj. 00-03 Twin Vanos, 3.0i Bj. 00-03 Twin Vanos (M52) E60/E61: 03-05 Twin Vanos, 525i Bj. 03-05 Twin Vanos, 530i Bj. 03-05 Twin Vanos E65/E66: 730i Bj. 02-05 Twin Vanos E83: X3-2.5I Bj. 03-06 Twin Vanos, X3-3.0I Bj 03-06 Twin Vanos E85: Z4-2.2I Bj. 03-06 Twin Vanos, 2.5I 03-06 Twin Vanos, 3.0I Bj.03-07 Twin Vanos

29


Timing Tools - BMW Petrol Engine Setting/Locking Kit For Bmw N42/N46/N46t 1.8, 2.0 – Chain Drive 0XAT1592 - Introduction: Suitable for setting and adjusting the timing on N42 and N46 engines with Valvetronic system. Include the tool to align the twin Vanos unit. - Application: BMW: 118i E81/82/87/88 (04-12), 120i E81/82/87/88 (04-12), 316ti Compact E46 (01-07), 318i/ti Compact E46 (01-07), 318i E90/91/92/93 (05-12), 320i E90/91/92/93 (05-12), 520i E60/61 (07-10), Z4 2.0 E85/E86 (04-09), X1 sDrive 18i E84 (10-12), X1 xDrive 18i E84 (10-12), X3 2.0 E83 (05-10) Engine Code: N42/N46/N46T: B18, B18A, B20, B20A, B20B, B20BD, B20BZ, B2O2

Engine Timing Tool Set For Professional Engine Repair For Bmw Diesel Engine 0XAT1483 - Introduction: Installation and removal of the camshaft / hydraulic chain tensioner. Checking and adjusting of the camshaft timing. Easily accessible operates the instruction, including the cross reference to the original part number. Spare part is optionally available. Clear the arrangement of tool in high quality plastic case with the soft foam insertion. - Application: Applicable: BMW - M41, M51, M47, M47TU/T2, M57TU/T2 engines and Land Rover - Range Rover, Freelander Locking Tool for Camshaft (M47/M57) 4 Cylinder Diesel Engine (M47), 6 Cylinder Diesel Engine (M57) e.g. in series E46 (318d, 320d, 330d) and E39 (525d, 530d) Retaining Pin for Tensioner - 4 Cylinder Diesel Engine (M41), 6 Cylinder Diesel Engine 2.5 (M51), and also for Opel/Vauxhall Omega 2.5TD Locking Pin (ψ11.8/ψ8) - M21, M40, M41, M42, M43, M43TU, M44, M47, M47TU, M50, M51, M52, M52TU, M54, M60, M62, M70, M73, S50B30, S50B32, S54, S62 Camshaft Alignment Tool - Diesel - 4 Cylinder Diesel Engine M41 in E36 (318TDS), 6 Cylinder Diesel Engine M51 in E36 (325TD/TDS, E34/E39 (525TD/TDS) Opel: Omega 2.5 TD Reaction Wrench - 4 Cylinder Diesel Engine M41 in E36 (318TDS), 6 Cylinder Diesel Engine M51 in E36 (325TD/TDS), E34/E39 (525TD/TDS) Opel: Omega 2.5 TD Timing Pin (ψ8 /ψ8.2 36 mm L) - M47T2 Engine Timing Pin (ψ8 /ψ8.2 30 mm L) - M57T2 Engine Injection Pump Extractor - M47 Engine Puller for Injection Pump - 4 Cylinder Diesel Engine (M41), 6 Cylinder Diesel Engine - 2.5 (M51), and also for Opel/Vauxhall Omega 2.5TD Injection Pump Extractor M47, M47T2, M47TU, M57, M57TU Engine on BMW 318D, 320D (E46) 1988-2005 and 318TD, 320TD, 525D, 530D, 530, 535 (E60-E61) 2000-2006

30


Timing Tools - BMW Petrol Engine Camshaft/Carrier Removal/ Installation Kit – Chain Drive 0XAT1120 - Introduction: Use in conjunction with the model number - petrol engine setting/ locking kit - BMW N42/N46/N46T 1.8, 2.0 - chain drive the kit provides the special tool for removal and installation of the camshaft and dismantling/rebuilding the camshaft carrier bracket/ Valvetronic assembly. The essential tool for safe removal of the torsion spring. - Application: Suitable for the following application the camshaft installation and removal as well as removal and installation of the inlet camshaft and the carrier assembly / Valvetronic system. Easily accessible operates the instruction including the cross reference to the original part number. Spare part is optionally available. Clear the arrangement of tool in high quality plastic case with foam insertion. BMW: 118i E81/82/87/88 (04-12), 120i E81/82/87/88 (04-12), 316/ti Compact E46 (01-07), 318/ti Compact E46 (01-07), 318i E90/91/92/93 (05-12), 320i E90/91/92/93 (05-12), 520i E60/61 (07-10), Z4 2.0 E85/86 (04-09), X1 sDrive 18i E84 (10-12), X1 xDrive 18i E84 (10-12), X3 2.0 E83 (05-10) Engine Code: N42/N46/N46T: B18, B18A, B20, B20A, B20B, B20BD, B20BZ, B202

Petrol Engine Twin Camshaft Setting/ Locking Kit – Incorporating Vanos Alignment For BMW N42 / N46 Engine And Camshaft/Carrier Bracket Remover & Installer Tool Kit 0XAT1605 Application: BMW: 118i E81/82/87/88 (04-12), 120i E81/82/87/88 (04-12), 316/ti Compact E46 (01-07), 318/ti Compact E46 (01-07), 318i E90/91/92/93 (05-12), 320i E90/91/92/93 (05-12), 520i E60/61 (07-10), Z4 2.0 E85/86 (04-09), X1 sDrive 18i E84 (10-12), X1 xDrive 18i E84 (10-12), X3 2.0 E83 (05-10) Engine Code: N42/N46/N46T: B18, B18A, B20, B20A, B20B, B20BD, B20BZ, B202

Petrol Engine Camsaft R + I Crank Pulley Installer Kit For BMW MINI, CHRYSLER 1.6 – Chain Drive 0XAT1395 - Introduction: The engine service kit is for removing/installing the camshaft sprocket and installing the crankshaft pulley on BMW Mini R50/52/53 & Chrysler PT Cruiser 1.6 petrol engines. The kit includes the engine support bracket. - Application: Model & Engine Code: BMW Mini: 1.6 One (01-09) W10B16BA, 1.6 Cooper (01-09) W10B16BA, 1.6 Cooper S (02-09) W11B16AA Chrysler: PT Cruiser (01-09) EJD

31


Timing Tools - BMW Petrol Engine Setting/Locking Kit For BMW N62/N62tu V8 & N73 V12 – Chain Drive 0XAT1402 - Introduction: Suitable for setting and adjusting the timing on BMW 3.6, 4.0, 4.4, 4.8 N62/N62TU V8 and N73 V12 engines. The kit includes camshaft setting plates, crankshaft locking pin and chain pre - tensioning tool. - Application: BMW: 540i E60/61 (05-10), 545i E60/61 (03-06), 550i E60/61 (05-10), 645i E63/64 (03-06), 650i E63/64 (05-11), 735i E65/66 (02-05), 740i E65/66 (05- 08), 745i E65/66 (02-05), 750iE65-66 (05-08), 760i E65/66 (02-08), X5 4.4 E53 (03-07), X5 4.8 E53/E70 (04-10) - Engine Code: N62/N62TU V8: B36A, B40A, B44A, B48B N73 V12: B60A

Engine Timing Tool Set For Professional Engine Repair For BMW N51/N52 0XAT1403 - Introduction: The setting and locking kit is suitable for a wide range of BMW 2.5 & 3.0 chain drive, six cylinder, twin camshaft petrol engine. The kit covers N51/N52 Valvetronic engine, and includes the Vanos alignment plate for these engines. - Application: Special design locates the camshaft in the TDC position. BMW: N51/N52 engine

Petrol Engine Setting/Locking Kit For BMW 1.6 N40/N45/N45t – Chain Drive 0XAT1413 - Introduction: Suitable for setting and adjusting the timing on 1.6 BMW N40, N45 and N45T chain drive petrol engines, and also for aligning VANOS unit on the inlet and the exhaust camshaft setting plates. - Application: BMW: 116 E81/82/87/88(04-09), 316i/ti Compact E46(01-07), 316i E90/91/92/93(05-10) Engine Code: N40, N45, N45T - (B16), B16AC

Petrol Engine Setting/Locking Kit For BMW, Land Rover, Morgan – Chain Drive 0XAT1301 Application: - Model: BMW: 530i (93-95), 540i (93-95), 535i (96-98), 535i with Vanos (97-03), 540i (96-98), 540i with Vanos (98-03), 730i (92-96), 735i (96-97), 735i with Vanos (98-02), 740i (92-98), 740i with Vanos (99-01), 840i (92-96), 840i with Vanos (96-97), X5 (99-04) Land Rover: Range Rover (02-05) Morgan: Aero 8 (00-04) - Engine Code: 3.0: 308S1 / 3.5: 358S1, 358S2 / 4.0: 408S1 / 4.6: 468S1 4.4: 448S1, 448S2, V8/448S2, Morgan M62

32


Timing Tools - BMW Engine Timing Tool Set For Bmw 0XAT1674 - Introduction: This kit designs to replace the timing chain on N14 engine. The engine is 1.6 turbo charged petrol engine. The tool designs to allow the camshaft and the crankshaft to be locked in the position to correctly check and set the camshaft timing. - Application: Manufacture

BMW Peugeot Citroen

Mode

Mini Cooper S 207 | 308 GT | THP | GTi DS3 | C4 Grande Picasso TPH

Type Engine Code

1.6 1.6 1.6 1.6 1.6

N14B16A EP6DT(5FX) EP6DTS(5FY) EP6DT(5FX) EP6DT(5FX)

Year

2007-2010 2006-2010 2006-2010 2006-2010 2006-2010

Engine Timing Tool Kit For BMW MINI One / Cooper(N14) / Cooper S 0XAT1099 - Introduction: This kit designs to replace the timing chain on N14 engine. The engine is 1.6 turbo charged petrol engine. The tool specifically designs to allow the camshaft and the crankshaft to be locked in the position to correctly check and set the camshaft timing. - Application: Engine timing tool kit for BMW Mini One 2001-2006 (W10B16AA), Mini Cooper 2001-2006 (W10B16BA) and Mini Cooper S 2002-2006 (W11B16AA).

Diesel Engine Setting/Locking Kit For BMW/ MINI N47/N57 1.6, 2.0, 3.0 – Chain Drive 0XAT1678 Application: Model: BMW: 116d E81/82/87/88 (08-12), 118d E81/82/87/88 (07-14), 120d E81/82/87/88 (07-14), 123d E81/82/87/88 (07-14), 316d E90/91/92/93 (09-12), 318d E90/91/92/93 (07-12), 320d E90/91/92/93 (07-12), 325d E90/91/92/93 (10-14), 330d/xd E90/91/92/93 (08-14), 520d E60/61 (07-10), 525d F10/11 (10-12), 530d F10/11 (10-13), 530dGT F07 (09-12), 535d F10/11(10-12), 535dGT F07 (10-12), 730d/Ld F01/02/04 (08-12), 740d F01/02/04 (09-12), 740d xDrive F01/02/04 (09-12), X1 sDrive 18d E84 (09-12), X1 sDrive 20d E84 (09-12), X1 xDrive 18d E84 (09-14), X1 xDrive 20d E84 (09-12), X1 xDrive 23d E84 (09-12), X3 2.0d E83 (07-10), X3 xDrive 18d E83 (08-10), X3 xDrive 30d E83 (11-12), X5 3.0d E70 (10-12), X5 xDrive 40d E70 (10-13), X6 xDrive 30d E71/72 (10-14), X6 xDrive 40d E71/72 (10-14) Mini: Clubman (10-14), Clubvan (12-14), Countryman (10-14), Mini (10-14), Paceman (13-14), Roadster (12-14)

33


Timing Tools - BMW Diesel Engine Setting Locking Tool Kit For BMW 2.0d, 3.0d M47/M57– Chain Drive 0XAT1414 - Application: Model: BMW: 118d (E87) (04-07), 120d (E87) (04-07), 318d/td Compact E46 (01-05), 318d/td E90/91 (05-08), 320d/td Compact E46 (98-05), 320d/cd E90/91 (05-08), 325d E90/91/92/93 (02-10), 330d/cd E46/90/91/92/93 (99-07), 335d E90/91/92 (06-11), 520d E39/60/61 (00-09), 525d/xd E39/60/61 (00-10), 530d/xd E46/60/61 (98-10), 535d E60/61(04-10), 635d E63/64(07-11), 730d/ld E38/65/66 (98-08), X3 2.0d E83 (04-07), X3 3.0d/sd E83 (03-10), X5 3.0d E53/E70 (00-10), X6 3.0d E71/72 (08-10), X6 3.5d E71/72 (08-10) Land Rover: Freelander Td4 (00-06), Range Rover Td6 (02-06), Rover MG-ZT/T (01-05), Rover 75 CDT/CDTi (99-05) Vauxhall/Opel: Omega-B (01-03) - Engine Code: BMW: M47, M47T2, M57, M57TU, M57T2 Land Rover: 204D3/Td4, 306D1/Td6 Rover / MG: M47R Vauxhall/Opel: Y25DT

Engine Timing Tool Set For BMW 0XAT1474 Application:

Item

Model

A

M52TU, M54, M56 (3er E46, 5er E39/E60/E61, 7er E38/E65/E66, X3 E83 X5 E53, Z3, Z4 E85)

B C D E F G

M52TU, M54, M56 M50, M52 (3er E36/E46, 5er E34/39, 7er E38, Z3) M50, M52, M52TU, M54, M56 M52, M52TU, M54, M56 M50 (3er E36, 5er E34) M50, M52, M52TU, M54, M56

BMW Diesel 2.5 Tds Timing Kit 0XAT1849 - Introduction: 0XAT1849 timing kit includes camshaft setting plate and TDC location pin required to “set” and “lock” the engine in the correct timing position. The kit also provides the camshaft and the injection pump chain tensioner retaining pins and the essential injection pump remover which is used when removing sprocket and/or chain as well as the injection pump. This tool additionally uses to retain and support the sprocket and the timing chain in position when the pump has removed. - Application: BMW M41/M51 diesel engine fits inModel: BMW: 318tds, 325, 525 and 725 td/tds Land Rover: Range Rover 2.5DT/SE (94-) Vauxhall/Opel: Omega-B 2.5TD (OHC25DT)

34


Timing Tools - BMW Petrol Engine Setting/Locking Tool Kit For BMW 2.5, 3.0 N51/N52/N52K/ N53/N54 – Chain Drive 0XAT1687 - Introduction: Suitable for a wide range of BMW 2.5 & 3.0 chain drive, six cylinder, twin camshaft petrol engine. The kit covers N51/ N52/N52K Valvetronic and N53/N54 direct injection engines, and includes Vanos alignment plates for these engines. - Application: BMW: 125i E88 (07-13), 128i E82/88 (07-08), 130i E81/E87 (05-12), 135i/S E82 (07-11), M Coupe (11-12), 323i E90/91/92/93 (04-11), 325i/xi E90/91/92/93 (05-13), 328i/xi E90/91/92/93 (04-08), 330i/xi E90/91/92/93 (04-14), 335i/xi (05-11), 523/Li E60/61, F10/11 (04-11), 525i/Li/xi E60/61 (04-10), 528i/xi E60/61, F10/11 (06-11), 530i/Li/xi E60/61, F10/11 (04-13), 535i/xi E60/61 (06-08), 630i E63/64 (04-11), 730i E65/66, F01/02/04 (04-11), 740i F01/02/04 (08-12), X1 3.0 xDrive25i E84 (10-11), X1 3.0 xDrive28i E84 (09-11), X3 2.5Si E83 (06-10), X3 3.0i/Si E83 (06-10), X3 3.0 xDrive28i F25 (11-13), X5 3.0 Si/xDrive30i E70 (06-10), X6 3.0 xDrive35i E71/72 (08-10), Z4 2.5i/Si E85/86 (05-09), Z4 3.0i/Si E85/86 (05-09), Z4 2.5 sDrive23i E89 (09-11), Z4 3.0 sDrive30i E89 (09-11), Z4 3.0 sDrive 35i/is E89 (09-13) Engine Code: N51/N52/N52K/N53/N54

Engine Timing Tool For BMW Mini | Citroen | Peugeot 1.4 | 1.6 N12 0XAT1907 - Introduction: This kit designs to allow the replacement of the timing chain on N12 16v 1.4/1.6 engine and to allow the cam and the crankshaft to be locked in the position so that the camshaft timing can be correctly checked. - Application: BMW: Mini One (07-10) / Mini Cooper (06-10) Peugeot: 207 | 308 (07-10) Citroen: C3 | DS3 VTi (08-10), C3 | C3 (08-10), Picasso DS3 | C4 VTi, C4 Picasso

BMW Crankshaft Rear Oil Seal Removal/ Install Ation Kit 0XAT1892 - Introduction: Install and remove the rear oil seal on the crankshaft. - Application: BMW(N40/N42/N45/N45T/N46/N46T/N52/N53/N54)

35


Timing Tools - BMW Petrol Engine Timing Chain Service Kit For BMW, Mini, Citroen, Pegeot – Chain Drive 0XAT1848 - Introduction: The essential tool for the removal/installation of the timing chain assembly on a range of BMW, Mini, PSA petrol engine. The kit includes balance shaft aligners, crankshaft gear holding tools and chain tensioner locking pin. The engine setting/locking kit covers the engine timing are available separately for each engine. - Application: BMW 1.8, 2.0, 2.5, 3.0; BMW/Mini/Citroen/Peugeot 1.4 and 1.6 petrol engines (chain) in: Model: BMW:116i E81/82/87/88 18i E81/82/87/88 120i E81/82/87/88 125i E82 130i E81/87 135iS E82 316i/ti Compact E46 316i E90/91/92/93 318i/ti Compact E46 318i E90/91/92/93 320i E90/91/92/93 323i E90/91/92/93 325i E90/91/92/93 330i E90/91/92/93 335i E90/91/92/93 520i E60/61 523i E60/61 525i E60/61 530i E60/61 630i E63/64 730i E65/66 Z4 2.0 E85/86 Z4 2.5/3.0 E85/86 X1 sDrive 18i E84 X1 xDrive 18i E84 X3 2.0 E83 X3 2.5/3.0 E83 X5 3.0 E70 N40 N42 N45 N45T N46 N46T N51 N52 N52K N53 N54 Mini: Cooper S R55/R56 Cooper R55/R56 Mini One R56 N12 N14 Citroen: C4 Picasso / C4 Peugeot: 207 / 207CC / 308 PSA: EP3(8FS) / 5EP6(5FW) / EP6DT(5FX) / EP6DTS(5FY)

Petrol Engine Twin Vanos Service Tool Kit For BMW M52TU, M54 & M56 0XAT1850 - Introduction: For using with the VANOS variable valve/timing unit on six cylinder BMW engine. Design for dismantling, assembling and the timing of the unit after the engine overhaul/repair work. The kit includes twin VANOS setting tool, camshaft sprocket assembly tool and compressed air connector. - Application: BMW: 320i E46 (98-07), 323i E46 (98-01), 325i E46 (00-07), 328i E46 (98-01), 330i E46 (00-07), 520i E39 (98-03), 520i E60/E61 (03-05), 523i E39 (98-03), 525i E60/E61 (03-05), 528i E39 (98-01), 530i E39 (00-03), 530i E60/E61 (03-05), 728i E38/E65/E66 (98-02), 730i E65/E66 (02-05), X3 2.5 E83 (03-07), X3 3.0 E83 (03-07), X5 3.0 E53 (99-07), Z3 2.0 E36 (99-03), Z3 2.2 E36 (00-03), Z3 2.8 E36 (99-03), Z3 3.0 E36 (00-03), Z4 2.2 E85 (03-06)

36


Timing Tools - BMW BMW Crankshaft Rear Oil Seal Removal/ Install Ation Kit 0XAT1857 - Introduction: This set includes the indispensable tool for installation the exhaust camshaft bearing cover and is suitable for BMW N51 and N52 engines. - Application: For locating the upper and lower bearing strip when installing the exhaust camshaft. Content: 6 pcs thrust tool, 2 pcs M7 screw, 1 pcs press tool

BMW (B40/N42/N45/N45T/N46/N46T /N51/N52/N52K/ N53/N54) Crankshaft Front Oil Seal Removal / Installtion Kit 0XAT1858 - Introduction: To remove and install the front crankshaft seal on BMW. - Application: BMW: N40/N42/N45/N45T/N46/N46T/N51/N52/N52K/N53/N54

BMW (N20/N51/N52/N52K/N52T/N55) Valve Spring Remover / Installer 0XAT1859 - Introduction: A special design tool removes and installs the high tension valve spring that acts on intermediate lever on BMW Valvetronic engine. Ensure the quick, the easy and the safe handling of the high force spring. - Application: For removing and installing the pressure spring on intermediate lever. BMW: N20, N51, N52, N52K, N52T, N55 N51 - Normally aspirated Inline 6 produces from 2004 to 2011 that featurs the dual VANOS and Valvetronic. N52 - A low mission version of N51, the same speciďŹ cation and production date.

BMW N63/S63/N74 Engine Timing Tool 0XAT1860 - Introduction: Special design locates and turns the camshaft in the correct TDC position. The timing tool is designed to hold the camshaft pulley for turning the central bolt. - Application: BMW N63/S63/N74 engine. Use to align the camshaft.

37


Timing Tools - BMW Diesel Engine Setting/Locking Kit For BMW/MINI N47/N57 1.6, 2.0, 3.0 – Chain Drive 0XAT1893 Application: Model: BMW: 114d F20/21 1.6D (12-14), 116d E81/82/87/88 (08-12), 116d F20/21 2.0D (11-13), 118d E81/82/87/88 2.0D (07-14), 118d F20/21 2.0D (11-13), 120d 2.0D E81/82/87/88 (07-14), 120d/xDrive F20/21 2.0D (11-13), 123d E81/82/87/88 2.0D(07-14), 125D F20/21 2.0D (12-13), 316d E90/91/92/93 2.0D (09-12), 316d F30/31 2.0D (12-13), 318d E90/91/92/93 2.0D (07-12), 318d F30/31 2.0D (12-13), 318D F30/31 2.0D (12-13), 320d E90/91/92/93 2.0D (07-12), 320d/Efficient Dynamics E90/91/92/93 2.0D (10-12), 320d/xDrive F30/31 2.0D (12-13), 325d E90/91/92/93 3.0D (10-14), 330d E90/91/92/93 3.0D (08-13), 330d/xd E90/91/92/93 (08-14), 520d E60/61 2.0D (07-10), 520d F10/11 2.0D (10-13), 520d/Efficient Dynamics F10/11 2.0D (11-13), 520d/xDrive F10/11 2.0D (11-13), 525d F10/11 3.0D (10-12), 530d F10/11 3.0D (10-13), 530d/xDrive F10/11 3.0D (11-13), 530dGT F07 (09-12), 530d/xDrive GT F07 3.0D (09-12), 535d F10/11 3.0D (10-12), 535d/xDrive GT F07 3.0D (10-12), 535d/xDrive F10/11 3.0D (11-13), 535dGT F07 (10-12), 640d/xDrive F12/13 3.0D (11-13), 730dF01/02/04V 3.0D (08-12), 730d/Ld F01/02/04 (08-12), 730d/xDrive F01/02/04 3.0D (09-12), 740d F01/02/04 (09-12), 740dxDrive F01/02/04 (09-12), M550d/xDrive F10/11 3.0D (12-13), X1 E84 2.0D (09-13), X1 F84 2.0D (09-13), X1 sDrive 18d E84 (09-12), X1 sDrive 20d E84 (09-12), X1 xDrive 18d E84 (09-14), X1 xDrive 20d E84 (09-12), X1 xDrive 23d E84 (09-12), X3 E832.0D (07-10), X3 F25 2.0D (11-13), X3 F25 3.0D (11-13), X3 xDrive 18d E83 (08-10), X3 xDrive 30d E83 (11-12), X5 E70 3.0D (10-12), X5 xDrive 40d E70 (10-13), X6 E71/72 3.0D (10-13), X6 xDrive 30d E71/72 (10-14), X6 xDrive 40d E71/72 (10-14) Mini: Clubman (10-14), Clubvan (12-14), Countryman (10-14), Mini (10-14), Paceman (13-14), Roadster (12-14)

BMW Mini Cooper(R53/W11) 0XAT1866 - Introduction: 0XAT1866 has specially designed with slotted the mounting holes to fit the both types of W11 pulley. - Application: To extract the crankshaft pulley by D11980 BMW Mini Cooper R53/W11

BMW N63/N74 Timing Chain Pre – Load 0XAT1927 - Introduction: Use to adjust the chain tensioner.

38


Timing Tools - BMW Engine Timing Tool For PSA BMW MINI W16D 0XAT1864 Application: Model: BMW Mini: Mini / Mini Clubman Citroen: C2 / C3 / Xsara Picasso / C4 / C5 MkII / C4 Picasso Grand Picasso / C5 Mk III / Berlingo Mk III C3 Picasso Peugeot: 206 / 206cc / 207 / 1007 / 307 / 207cc / 308 308cc / 3008 / 5008 / Partner MK3

Petrol Engine Setting/Locking Kit For BMW Mini, Citroen, Peugeot – Chain Drive 0XAT1421 - Introduction: The setting and locking kit is suitable for the timing 1.4 & 1.6 16v Valvetronic direct injection and chain drive petrol engines, fit in BMW Mini, Peugeot and Citroen vehicles. - Application: BMW Mini: Mini One R56 (07-10), Cooper R55 (06-10), Clubvan R55 (12-14), Clubman R55 (10-14), Countryman R55 (07-10), Cooper R56 (07-10), Cooper S R55/R56 (06-10), Mini R56/57 (07-15), R58 Coupe (11-15), R59 Roadster (12-15), Countryman R60 (10-16), Clubman R60 (10-14), Clubvan R60 (12-14), Roadster R61 (13-15), Paceman R61 (13-16) Citroen: C4, C4 Picasso Peugeot: 207/CC (07-), 208 (12-), 308/CC (07-), 508 (11-), 3008 (09-), 5008 (09-), Partner (09-), RCZ (10-) Engine Code: 1.4: N12B14, N12B14AB 1.6: EP3 (8FS), EP3C (8FR), EP6 (5FW), EP6C (5FS), EP6CDT (5FV), EP6DT(5FT), EP6DT (5FX), EP6DTS (5FY), N14B16A, N14B16CD, N14B16T0, N14B16CD/T0, N16B16A, N16B16K0, N16B16A/M0, N16B16A/MO, N16B16M0, N16B16U0

BMW Crankshaft Pulley Holder (N47) & Crankshaft Rotating Tool For Bmw M52, M54, M56 0XAT0304 - Introduction: Special design rotates BMW diesel engine crankshaft. For holding the crankshaft pulley while loosening or tightening the middle pulley bolt. Allow safe and damage - free of the removal / installation. - Application: BMW: 325, 330, 335, 525, 530, 535, 730 Engine Code: 2.5D: M57N256D2 3.0D: M57306D3, M57306D4, M57306D5, M57D30A, M57N206D3, M57N2306D3, M57N306D2, M57N306D3, M57N306D5, N57N306D2, N57N306D3

39


Timing Tools - BMW Diesel Timing Kit For L AND ROVER & MG 2.0/3.0 & Diesel Engine Setting/Locking Kit For BMW/Mini N47/N57 1.6, 2.0, 3.0 – Chain Drive 0XAT0309 Application: Camshaft Aligning Tool & Camshaft Aligning Tool Clamp & Tensioner Locking Pins & Flywheel Timing Pin & Flywheel Timing Pin (ψ8 /ψ8.2 30 mm L) This set enables the correct timing to be made when servicing BMW M47 2.0 16 engine. Model: BMW: 118d (E87) (04-07), 120d (E87) (04-07), 318d/td Compact E46 (01-05), 318d/td E90/91 (05-08), 320d/td Compact E46 (98-05), 320d/cd E90/91 (05-08), 325d E90/91/92/93 (02-10),330d/cd E46 /90/91/92/93 (99-07), 335d E90/91/92 (06-11), 520d E39/60/61 (00-09), 525d/xd E39/60/61 (00-10), 530d/xd E46/60/61 (98-10), 535d E60/61 (04-10), 635d E63/64 (07-11), 730d/ld E38/65/66 (98-08), X3 2.0d E83 (04-07), X3 3.0d/sd E83 (03-10), X5 3.0d E53/E70 (00-10), X6 3.0d E71/72 (08-10), X6 3.5d E71/72 (08-10) Land Rover: Freelander TD4 (00-06), Range Rover TD6 (02-06), Rover MG-ZT/T (01-05), Rover 75 CDT/CDTi (99-05) Vauxhall/Opel: Omega - B (01-03) Diesel Engine Setting/Locking Kit - BMW/ MINI N47/N57 1.6, 2.0, 3.0 - Chain Drive Model: BMW: 116d E81/82/87/88 (08-12), 118d E81/82/87/88 (07-14), 120d E81/82/87/88 (07-14), 123d E81/82/87/88 (07-14), 316d E90/91/92/93 (09-12), 318d E90/91/92/93 (07-12), 320d E90/ 91/92/93 (07-12), 325d E90/91/92/93 (10-14), 330d/xd E90/91/92/ 93 (08-14), 520d E60/61 (07-10), 525d F10/11 (10-12), 530d F10/11 (10-13), 530dGT F07 (09-12), 535d F10/11 (10-12). 535dGT F07 (10-12), 730d/Ld F01/02/04 (08-12), 740d F01/02/04 (09-12), 740d xDrive F01/02/04 (09-12), X1 sDrive 18d E84 (09-12), X1 sDrive 20d E84 (09-12), X1 xDrive 18d E84 (09-14), X1 xDrive 20d E84 (09-12), X1 xDrive 23d E84 (09-12), X3 2.0d E83 (07-10), X3 xDrive 18d E83 (08-10), X3 xDrive 30d E83 (11-12), X5 3.0d E70 (10-12), X5 xDrive 40d E70 (10-13), X6 xDrive 30d E71/72 (10-14), X6 xDrive 40d E71/72 (10-14) Mini: Clubman (10-14), Clubvan (12-14), Countryman (10-14), Mini (10-14), Paceman (13-14), Roadster (12-14)

BMW Camshaft Timing Tool – S54 Engine 0XAT1901 - Introduction: For checking and setting the camshaft timing when installing the VANOS adjustment unit on S54 engine. - Application: BMW: E46/M3 (S54) Cabriolet (00~06), M3 (S54) Sports Coupe (99~06), M3 CSL (S54) Sports Coupe (03~04), E85/Z M Roadst (05-07), E86/Z M Coupe (06-07)

40


Timing Tools - BMW Diesel Engine Setting/Locking Kit For BMW/ Mini N47/N57 1.6, 2.0, 3.0 – Chain Drive 0XAT0305 Application: Model: BMW: 114d F20/21 1.6D (12-14), 116d E81/82/87/88 (08-12), 116d F20/21 2.0D (11-13), 118d E81/82/87/88 2.0D (07-14), 118d F20/21 2.0D (11-13), 120d 2.0D E81/82/87/88 (07-14), 120d/xDrive F20/21 2.0D (11-13), 123d E81/82/87/88 2.0D (07-14), 125D F20/21 2.0D (12-13), 316d E90/91/92/93 2.0D (09-12), 316d F30/31 2.0D (12-13), 318d E90/91/92/93 2.0D (07-12), 318d F30/31 2.0D (12-13), 318D F30/31 2.0D (12-13), 320d E90/91/92/93 2.0D (07-12), 320d/Efficient Dynamics E90/91/92/93 2.0D (10-12), 320d/xDrive F30/31 2.0D (12-13), 325d E90/91/92/93 3.0D (10-14), 330d E90/91/92/93 3.0D (08-13), 330d/xd E90/91/92/93 (08-14), 520d E60/61 2.0D (07-10), 520d F10/11 2.0D (10-13), 520d/Efficient Dynamics F10/11 2.0D (11-13), 520d/xDrive F10/11 2.0D (11-13), 525d F10/11 3.0D (10-12), 530d F10/11 3.0D (10-13), 530d/xDrive F10/11 3.0D (11-13), 530dGT F07 (09-12), 530d/xDrive GT F07 3.0D (09-12), 535d F10/11 3.0D (10-12), 535d/xDrive GT F07 3.0D (10-12), 535d/xDrive F10/11 3.0D (11-13), 535dGT F07 (10-12), 640d/xDrive F12/13 3.0D (11-13), 730d F01/02/04 3.0D (08-12), 730d/Ld F01/02/04 (08-12), 730d/xDrive F01/02/04 3.0D (09-12), 740d F01/02/04 (09-12), 740d xDrive F01/02/04 (09-12), M550d/xDrive F10/11 3.0D (12-13) X1 E84 2.0D (09-13), X1 F84 2.0D (09-13), X1 sDrive 18d E84 (09-12), X1 sDrive 20d E84 (09-12), X1 xDrive 18d E84 (09-14), X1 xDrive 20d E84 (09-12), X1 xDrive 23d E84 (09-12), X3 E83 2.0D (07-10), X3 F25 2.0D (11-13), X3 F25 3.0D (11-13), X3 xDrive 18d E83 (08-10), X3 xDrive 30d E83 (11-12), X5 E70 3.0D (10-12), X5 xDrive 40d E70 (10-13), X6 E71/72 3.0D (10-13), X6 xDrive 30d E71/72 (10-14), X6 xDrive 40d E71/72 (10-14) Mini: Clubman (10-14), Clubvan (12-14), Countryman (10-14), Mini (10-14), Paceman (13-14), Roadster (12-14) Engine Code: N47/N47S: C16K1, C16U1, C20K1, C20U1, D16, D20A, D20A/O0, D20A/0U0, D20B, D20C, D20C/K1, D20C/O1, D20C/U1, D20D/T0, D20D/T1, D20O0, D20O1, D20C/O1, D20T0, D20U0, SD20B/D/T0, TD20K1, TD20U1 N57: D30A, D30A/O0, D30B/TO, D30C/S1, D30B/T0, D30O0, D30O1, D30TO, D30T0, D30UO, D30U0

BMW Camshaft Alignment Tool 0XAT1011 Application: - Removes lock the nuts on thermo-Viscous fans found on Ford and BMW many vehicles. - Made from tempered pressed steel with PVC dipped handle Model: BMW: 316i 1.6E36 (93-99), 316i Campact 1.6 E36 (98-01), 316i Campact 1.9 E36 (98-01), 316i 1.6 E46 (99-02), 318i 1.9 E46 (99-02), 318i 1.8 E46 (94-99), 318i 1.9 E46 (98-01), \ 518i 1.8 E34 (94-96), Z3 1.8 E36 (96-99), Z3 1.9 E36 (98-03)

41


Timing Tools - BMW BMW Timing Tool 0XAT0507 - Introduction: Setting for BMW Vanos engine. - Application: BMW: M52, M54, M56 BMW: Model Type 320i | 323i | 328i Coupe E46 520i | 523i | 528i E39 728i E38 Z3 2.0i | 2.8i Z3 2.2i | 3.0i X5 3.0i E53 320i E46 520i E39 520i E60 | 61 325i | Compact E46 330i E46 525i | 530i E39 525i | 530i E60 | 61 730i E65 | 66 X3 3.0 E83 Z4 2.5 | 3.0 E85

Year 1998-2001 1998-2001 1998-2002 1999-2003 2000-2003 1999-2007 2000-2007 2000-2003 2003-2005 2000-2007 2000-2007 2000-2003 2003-2005 2002-2005 2003-2007 2003-2006

Engine Timing Tool – BMW Twin Cam 0XAT1106 - Introduction: For using on the twin cam engine which both camshafts have to be locked in place whilst servicing the camshaft and replacement of the cam belt. A reduced kit offering the twin camshaft engine timing components without the Vanos locking tool. - Application: BMW:316i, 318i, 318i S16v (S30), 318i S | Coupe (E36) 318Ti Compact (E36), 320i 24v (E36), 323i Compact (E36) 325i 24v (E36), 328i (E36), 518i , 520i 24v (E34 | E39) 523i, 525i 24v (E34 | E39), 528i (E39), 728i (E38) Z3 1.9i | 2.8i

BMW (M60/M62) Camshaft Alignment Tool 0XAT1105 - Introduction: Camshaft locking tool for BMW: 3.0, 3.5, 4.0, 4.4, 4.6 ~ 8 cylinder DOHC V32 petrol engines Crankshaft locking tool for BMW: 3.0, 3.5, 4.0, 4.4, 4.6 ~ 8 cylinder DOHC V32 petrol engines. - Application: BMW: 530i LCi (E34), 535i (E39), 535i LCi (E39), 730i (E32), 730iL LCi (E32), 730i (E38), 730iL (E38), 540i LCi (E34), 740i LCi (E32), 740iL LCi (E32), 740i (E38), 740i A (E38), 740iL (E38), 840Ci (E31), 735i (E38), 735iL (E38), 540i (E39), 540i (E39)

42


Timing Tools - BMW BMW Timing Tool Set (N20, N26) 0XAT0303 - Introduction: The setting and locking kit covers a wide range of BMW 2.0 liter petrol engine.Include the necessary tools for setting and locking the camshaft and the crankshaft, a tool for setting the Vanos unit, and a tool for setting the timing chain pre - tension. - Application: Model: BMW: 1 Series: 125i (12-14); 3 Series: 320i X-Drive (12-14), 328i (12-14), 328i X-Drive(12-14); 5 Series: 520i (11-14), 528i X-drive (11-14); X1: X-Drive 20i (11-14), S-Drive 20i (11-14), X-Drive 28i (11-14); X3: 20i (11-14), X-Drive 20i (11-14), Z4: S-drive 20i (11-14), S-drive 28i (11-14) Engine Code: N20B2OA, N20B20, N26B20, N20B20/UO

BMW Timing Tool Set (N13, N18) 0XAT1898 - Introduction: Design for ďŹ xing the camshaft in TDC position. Use the tool to dismantle and assemble the intake and the exhaust of the camshaft. - Application: Model: BMW: N13, N18 engine Mini: Cooper S [R56/57] (10-15), Coupe Cooper S [R58] (12-15), Countryman [R60] (12-14), Paceman [R61] (13-15) Engine Code: N20B2OA, N20B20, N26B20, N20B20/UO

BMW Timing Tool Set (S65) 0XAT0300 - Introduction: To locate the camshaft in TDC position and correct VANOS angle. - Application: Model: BMW: E90/M3, E92/M3 Engine Code: S65

BMW Camshaft Alignment Tool (S63) 0XAT0504 - Introduction: Special design locates the camshaft in TDC position. Checking and adjusting the timing chain tensioner. - Application: BMW S63 engine on F10/M5(10~), F06/M6(11~), F12 13/M6(11~), E70/X5M(08~13), E71/X6M(08~13)

43


Timing Tools - BMW BMW (M60/M62) Camshaft Alignment Tool 0XAT1105 - Introduction: Camshaft locking tool for BMW: 3.0, 3.5, 4.0, 4.4, 4.6 ~ 8 cylinder DOHC V32 petrol engines Crankshaft locking tool for BMW: 3.0, 3.5, 4.0, 4.4, 4.6 ~ 8 cylinder DOHC V32 petrol engines. - Application: BMW: 530i LCi (E34), 535i (E39), 535i LCi (E39), 730i (E32), 730iL LCi (E32), 730i (E38), 730iL (E38), 540i LCi (E34), 740i LCi (E32), 740iL LCi (E32), 740i (E38), 740i A (E38), 740iL (E38), 840Ci (E31), 735i (E38), 735iL (E38), 540i (E39), 540i (E39) Engine Code: M60 B30, M60 B40, M62 B35, M62 B44, M62 B46, M62TU B35, M62TU B44

BMW (M52, M54, M56) Timing Tool Kit 0XAT0306 - Introduction: BMW double Vanos setup the bracket. Suitable for setting and locking the camshafts on chain drive BMW Vanos engine. Remove the stuck vibration damper hub in conjunction. - Application: For gripping the vibration damper when removing the retaining bolts on BMW M52TU, M54, M56 Model 320i | 323i | 328i Coupe 520i | 523i | 528i 728i Z3 2.0i | 2.8i Z3 2.2i | 3.0i X5 3.0i 320i BMW 520i 520i 325i | Compact 330i 525i | 530i 525i | 530i 730i X3 3.0 Z4 2.5 | 3.0

Type E46 E39 E38

E53 E46 E39 E60 | 61 E46 E46 E39 E60 | 61 E65 | 66 E83 E85

Year 1998-2001 1998-2001 1998-2002 1999-2003 2000-2003 1999-2007 2000-2007 2000-2003 2003-2005 2000-2007 2000-2007 2000-2003 2003-2005 2002-2005 2003-2007 2003-2006

BMW Crankshaft Front Oil Seal Removal / Installtion Kit 0XAT0308 - Introduction: To remove and install the front crankshaft seal on BMW. - Application: BMW: N40/N42/N45/N45T/N46/N46T/N51/N52/N52K/N53/N54

44


Timing Tools - BMW BMW Flywheel Holder 0XAT0303A - Introduction: Special design to fix flywheel when replacing timing chain To release & tighten the central bolts on vibration damper - Application: BMW : 47T2/M47TU/M57T2/M57TU/M67/N45/N45T/ N46/N46T/N51/N52/N53/N54/W17

BMW & Mercedes Benz Extractor Set 0XAT1894 - Introduction: Puller for Injection Pump Tool Kit Applicable for BMW 4 cylinder diesel engine (M41), 6 cylinder diesel engine - 2.5 (M51) also for Opel/Vauxhall Omega 2.5 TD. To loosen the injection pump pulley from the shaft when dismounting the injection pump. Injection Pump Extractor Tool Kit To lock the injection pump sprock in position and press out the injection pump shaft. This tool is required when removing the injection pump. Note: Only item 1 is used on M47 engine. Item 1 and 2 are both used on M47TU, M57 and M57TU engines. Mercedes Benz Guide Rail Pin Puller Can remove even the most stubborn pins from the cylinder head, unlike the short slide hammer previously used to attempt this job. This puller incorporates a thrust bearing to ease the pulling action. The overall length is 85 mm which allows it to fit into those tight problem area.

Injection Pump Extractor Tool Kit For BMW 0XAT1441 - Introduction: This tool requires when removing the injection pump. To lock the injection pump sprocket in position and to press out the injection pump shaft. - Application: BMW M47, M47TU, M57, M57TU engines Note: only item 1 is used on M47 engine. Item 1 and 2 are both used on M47TU, M57 and M57TU engines.

Crankshaft Rotating Tool For BMW M52, M54, M56 0XAT1738 Application: BMW: 325, 330, 335, 525, 530, 535, 730 Engine Code: 2.5D: M57N256D2 3.0D: M57306D3, M57306D4, M57306D5, M57D30A, M57N206D3, M57N2306D3, M57N306D2, M57N306D3, M57N306D5, N57N306D2, N57N306D3

45


Timing Tools - BMW BMW Valve Pressure Spring Installer/Remover(N20, N26, N55) 0XAT1929 - Introduction: Special design removes and installs the pressure spring on intermediate lever. - Application: BMW: N20, N26, N55

BMW Valve Pressure Spring Installer/Remover(N20, N26, N55) 0XAT1899 - Introduction: Special design installs and removes the injector in N55 engine In order to remove BMW N55 fuel injector from the cylinder head must be utilized. Failure to use the special tool will result in damage to the injector. - Application: BMW: N55 engine

BMW Valve Pressure Spring Installer/Remover(N20, N26, N55) 0XAT4366 - Introduction: Special design installs and removes the injector in N20 and N55 engines. - Application: BMW: N20, N55 engine

BMW Injector Remover/Installer 0XAT0311 - Introduction: Special design installs and removes the injector in N63 engine. - Application: BMW: N63 engine

BMW Injector Remover (N53, N54 0XAT0506 - Introduction: Special design removes the injector in N53 and N54 engines. - Application: BMW: N53, N54 engine

46


Timing Tools - FIAT Petrol Engine Twin Cam Setting/ Locking Tool Kit For Fiat 1.6 16v 0XAT1264 - Introduction: 0XAT1264 includes camshaft setting plate, which locates at the rear of the camshaft to 'lock' in the timed position and the special tensioner adjuster. Note: TDC position tool on Fiat twin cam engine is established using (A), (A) requires a suitable dial test indicator such as AK9634M. In addition, a flywheel holding tool is required to 'lock' the crankshaft whilst releasing/tightening the crank pulley bolt. The crank pulley must be removed in order to remove the timing belt. The flywheel holding tool is dependent upon - Application: Fiat 1.6 16v twin cam petrol engine (95-) in: Fiat: Brava, Bravo, Marea, Marea Weekend, Multipla, Palio, Stilo Engine Code: 178B3.000, 182A4.00, 182A6.000 & 182B6.000

Engine Timing Tool For Fiat 1.2 16V 0XAT1534 - Introduction: For using the latest 1.2 16v Fiat engine, including Bravo/ Brava/Punto/Stilo with engine code 176 B9 000, 182B2.000 & 188 A5.000. - Application: To determine the specified piston position and to prevent the camshaft from timing or holding in the position when changing the timing belt or during other engine repair.

Fiat

Lancia

Model 500 Brava Bravo Grande Punto Idea Idea Marea Marea Weekend |Marengo Palio Weekend Punto Punto/Punto Classic Stilo Ypsilon

Style 1.2 1.2 1.2 1.2 1.2 1.2 / 16v 1.2 1.2 1.2 / 16v 1.2 1.2 / 16v 1.2 1.2 / 16v

Year 2007 1995-2002

1993-1999 1999 1996-2003

Engine Timing Set For Fiat 1.7d / Td 0XAT1660 - Introduction: This kit designs to lock 1.7 diesel engine used in some pre 2002 Fiat range. - Application: Fiat Punto 1.7D/TD diesel engine with an adjustable camshaft timing belt pulley.

47


Timing Tools - FIAT Diesel Engine Setting/Locking Set For Fiat/Iveco/Citroen/Peugeot 2.2d, 2.3d Belt And Chain Drive 0XAT1547 - Introduction: Use for the timing 2.2D/3.0D belt and the chain drive engine, including later chain in the head version and usually found in the light commercial vehicle. Feature a water sensor installation socket, crankshaft pulley turning tool, timing cover centering plate, oil pump setting plate as well as camshaft and crankshaft locking tools. The engine is found in Ford Transit. - Application: Model: Citroen: Relay/Jumper III (06-12) Fiat: Ducato (02-13) Iveco: Daily (03-10), Daily/Ecodaily (09-11) Peugeot: Boxer III (06-12)

Timing Tool Set For Fiat & Alfa Romeo 0XAT1548 - Introduction: This tool kit contains the essential tool is required when replacing the cylinder head gasket, timing the tooth belt, and checking the engine timing on Fiat and Alfa Romeo engines. - Application: Petrol Engine: Fiat: Brava, Bravo, Barchetta, Cargo, Coupe, Marea, Palio, Weekend, Punto, Multipla, Stilo, Idea Doble twin cam engine 1.2, 1.4, 1.6, 1.8 16v - Diesel Engine: Fiat: Brava, Bravo, Marea/Weekend, Palio, Punto, Multipla, Doblo, Ulysse, Ducato, Stili JTD diesel engine 1.9D/TD, 1.9JTD, 2.4TD/JTD

Timing Tool Set For Fiat & Alfa Romeo 0XAT1654 - Introduction: For using on Fiat 1.9D/TD with Peugeot engine: Punto 1.9D | Brava | Bravo 1.9D Turbo | Marea| Weekend 1.9d Turbo, Punto 1.9 JTD | Brava| Bravo 1.9 JTD | Marea | Weekend 2.4 JTD | Multipla 1.9 JTD 1996 < Marea 2.4D Turbo | Marea Weekend 2.4D Turbo and Alfa Romeo/Fiat 1.9 PSA derived D and TD engines. Manufacture Model Style 1.9D | TD (96-) Brava / Bravo Marea / Marea Weekend Fiat 1.9D | TD (94-) Ulysee Scudo 2.4D Turbo (96-) Marea /Marea Weekend 2.1 | 2.2D | TD XM Xantia / Dispatch Citroen 2.1D Turbo Jumpy / Synergie Evasion 1.9D | TD | 2.1D 406 / 806 Peugeot Turbo (94-) Expert / Boxer

48


Timing Tools - FIAT Engine Timing Set For Fiat 1.9D 0XAT1661 - Introduction: This kit designs to lock the popular non - turbo 1.9 diesel engine used in pre 2000 Fiat range. - Application: Fiat 1.9D/Ducato 1.9D/Tempra 1.9D diesel engine with an adjustable camshaft timing belt pulley.

Engine Timing Set For Fiat 1.9TD 0XAT1662 - Introduction: Engine timing set is for Tipo, Ducato and Tempra (turbo) 1.9 TD with engine code 149B1.000, 160A6.000, 160 A7.000, 160 D1.000, 230 A2.000, 230 A3.000, 230 A4.000 & 280 B1.000. - Application: Fiat 1.9 TD/ Ducato 19 TD/ Tempra 1.9 TD diesel engine with an adjustable camshaft timing belt pulley.

Diesel Engine Setting/Locking Kit 1.7d/ Dt, 1.9d/Dt For Alfa Romeo, Fiat – Chain Drive 0XAT1093 - Introduction: Suitable for the timing belt replacement on 1.7D/DT & 1.9D/TD engines in Alfa Romeo and Fiat vehicles. The kit includes camshaft setting plates and crankshaft locking tool. - Application: Model: Alfa Romeo: 145(94-00), 146(94-00), 155 (93-98) Fiat: Ducato (87-98), Fiorina (97-01), Punto(96-99), Strada Pickup(99-00), Talento(87-94), Tipo(90-95), Bravo (95-97)

Diesel Engine Setting/Locking Set For Fiat/Iveco/Citroen/Peugeot/Renault/ Vauxhall/Opel – 2.5d/Dt, 2.8d/Tdi/Dci/Hdi/ Jtd – Belt Drive 0XAT1690 Introduction: The set includes the locking pin for 2.5D and 2.8D diesel engines and later 2.8 DTi/DCi/JTD/HDi variant of this popular van engine, and also includes tensioner retaining tool which retains the tension plunger in a retracted position during the belt change (C). The locking pin for the injection pump - non common rail (B) and the flywheel (A) is included in this set.

49


Timing Tools - FIAT Diesel Engine Setting/Locking Set For Fiat, Iveco, Citroen, Peugeot – 2.3d, 3.0d Belt/Chain Drive 0XAT1663 - Introduction: 2.3D diesel engine has a timing belt - the crankshaft to the camshaft sprocket, and the twin camshaft connects by a chain located within the cylinder head at the rear of the engine. 3.0D diesel engine basically utilizes the same timing tool but the chain drive is from the crankshaft to the valve train. - Application: Model: Fiat: Ducato (02-11) Iveco: Daily (03-10), Daily/EcoDaily (09-11) Citroen: Relay/Jumper III (06-12) Peugeot: Boxer III (06-12)

Petrol Engine Setting/Locking Kit For Fiat, Ford, Lancia 1.2, 1.4 8v Belt Drive 0XAT1683 - Introduction: The kit consists of crankshaft locking tool, camshaft setting tool and tensioner adjuster for 1.2 engine, and camshaft sprocket locking tool and the alignment fixture for the camshaft on 1.4 VVT engine. - Application: Model: Fiat: 500 (07-12), Doblo/Cargo (05-10)/Grande Punto (07-12)/Idea (04-12), Linea (07-11), Panda EVO2 (05-11), Punto EVO (09-12) Ford: Ka (09-12) Lancia: Ypsilon (06-11), Musa (05-12)

Petrol Engine Setting/Locking Kit For Fiat, Ford, Lancia 1.2 , 1.4 8V – Belt Drive 0XAT1672 - Introduction: The kit consists of camshaft setting tool, crankshaft locking tool and tensioner adjuster for 1.2 engine, camshaft sprocket locking tool and the alignment fixture for the camshaft sensor on 1.4 VVT engine. - Application: Model: Fiat: 500(07-12), Doblo/Cargo (05-10), Grande Punto (07-12), Idea (04-12), Linea (07-11), Panda EVO2 (05-11), Punto EVO (09-12) Ford: Ka (09-12) Lancia: Ypsilon (06-11), Musa (05-12)

Tensioning Pry 0XAT1670 - Introduction: For Fiat Bravo/Brava 1.4 12v (1995 onward) - Application: To relieve the tensioner load.

50


Timing Tools - FIAT Fiat 1.3 Jtd Multijet Diesel Engine Locking Tool Kit 0XAT1838 - Introduction: Fiat 1.3 JTD Multi - jet 16v range of engine is the twin camshaft and the common rail diesel engine. The chain drive connects the crankshaft to the exhaust camshaft, which is in turn connected by the rear gear to the inlet camshaft. The kit depends upon the level of repair work being undertaken on the engine. For straight forward checking and setting of the camshaft / crankshaft timing. - Application: Model: Punto: 1.3 JTD Multi-Jet (2003-2007) Panda: 1.3 JTD Multi-Jet (2003-2009) Idea: 1.3 JTD Multi-Jet (2004-2006) Doblo: 1.3 JTD Multi-Jet (2004-2006) Doblo Cargo : 1.3 JTD (2004-2006)

Fiat 1.3 Jtd Multijet Diesel Engine Locking Tool Kit 0XAT0515 A - Crankshaft Pulley Flange Holding Tool B - Timing Chain Tensioner Tool C - Camshaft Holding Tool (Use with Crankshaft Pulley Flange Holding Tool)

Wheel Internal Thread Kit & Reverse Action Wheel Stud Thread Restorer Kit 0XAT6070 - Introduction: For using on vehicle that using the wheel bolts. The unique design allows for the two halves of the thread restorer to be ďŹ tted on the good thread and wound back over the damaged thread, normally at the end of the stud. The traditional thread restorer relies on luck for the restored and the undamaged threads to align. The kit contains three most common wheel stud thread sizes. Thread size: 12 x 1.25 mm, 12 x 1.5 mm, 14 x 1.5 mm Adaptor Holder: 29 mm Hex Drive - Application: M12 x 1.25 for PSA, M12 x 1.5 for Mercedes Benz and BMW, M12 x 1.75 for Volvo and M14 x 1.5 for VAG model

Tensioning Tool For Fiat/Peugeot 0XAT1671 Application: Tensioning tool for the clockwise/anti - clockwise tensioner For Fiat use on Ducato 2.8D 1997 - 2002 & 2.8D JTD 2000 - 2004 with engine code 8140.63, 8140.43 For Peugeot use on Argenta, Croma, Ducato & Talento 2.5/ 2.8D 1997-2002 & 2.8D JTD 2000-2004

51


Timing Tools - FORD Setting/Locking Tool Set For Ford Tdci, Mazda D 1.4, 1.6, Psa Hdi 0XAT1287 - Introduction: A special 4 piece kit contains the necessary special pin required to lock the camshaft sprocket and the flywheel; to align the crankshaft fuel pump when checking the valve timing on 2.0 and 2.4 liter chain drive engines and/or replacing the timing belt on 1.4 liter engine. - Application: Model: Citroen: C1 (05-08), C2 (03-08), C3 (02-08), C4/C5 (04-08), Xsara (02-06), Xsara Picasso( 04-07), Berlingo (05-08) Ford: Fiesta/Fusion 1.4 (02-08), Focus/Fusion 1.6 (04-08), Focus/C-Max 1.6 (03-07) Mazda: 2 (02-07), 3 (04-08) Peugeot: 107/1007 (05-08), 206 (01-08), 207 (06-08), 307 (01-08), 407 (04-08)

Petrol/Diesel Engine Flywheel Locking Tool Set For Ford – Belt Drive 0XAT1374 - Introduction: The associated tool uses with a number of Ford setting/locking kit is for locking the crankshaft in the timed position by locating into the flywheel. Suitable for counter - holding the crankshaft when releasing or tightening the crankshaft pulley bolts. Use on a wide range of Ford engine, particularly 1.8 TDDi/TDCi and 2.0 TDCi diesel, 1.6 Ti-VCT and later 1.25/1.4 16v duratec petrol engines. - Application: Ford: C-MAX(07-12), Fiesta/Fusion(08-12), Focus(98-12), Focus/C-MAX(03-07), Galaxy(06-12), Grand C-MAX(10-12), Kuga(08-12), Mondeo(07-12), S-MAX(06-12), Tourneo Connect(02-12), Transit Connect(02-12)

Camshaft Sprocket Puller For Ford/ Citroen /Peugeot/Mazda Diesel Engine 0XAT1517 Application: Model: Ford: C-Max (10-14), Courier (00-02), Fiesta (08-11), Fusion (02-11), Focus (11-14), Galaxy (07-14), Mondeo (06-14), S-Max(06-10), Tourneo Connect (02-06), Transit Connect (02-06) Citroen: C3 III (10-14), DS3 (10-14), Xsara II (00-14), Xsara Picasso (99-10), C4 (04-11), C4 II (11-14), C4 Picasso/Grand Picasso (10-14), C4 Aircross (12-14), C5 (00-05), C5 II (04-08), C5 III (10-14), DS4 (11-14), Xantia (98-01), Synergie/Evasion (99-03), C8 (02-14), Nemo (08-10), Berlingo I/II (99-11), Berlingo III (08-14), Dispatch/Jumpy (99-07), Dispatch/Jumpy II (07-14), Relay/Jumper (01-02) Mazda: 2 (DE/DH) (02-10) Peugeot: 107 (05-10), 1007 (05-10), 206 (01-09), 206CC (05-07), 208 (12-14), 306 (99-02), 307 (01-06), 307CC (05-09), 308 (11-14), 308CC (09-14), 407 (08-11), 407 Coupe (07-12), 508 (11-14), RCZ (10-14), 2008 (13-14), 3008 (10-14), 4008 (12-14), 5008 (10-14), Bipper (08-10), Partner/Partner Origin/ Ranch I/II (05-11), Partner III (08-14)

52


Timing Tools - FORD Engine Timing Tool Set For Ford & Mazda 0XAT1282 - Introduction: The comprehensive kit covers the current Ford 1.4, 1.6, 1.8 and the new 2.0 TDCi diesel giving extensive coverage of the modern Ford belt drive duratorq diesel engines. - Application: Model: Ford: 1.4TDCi, 1.6TDCi, 1.8Di/TDDi/TDCi, 2.0TDCi, Fiesta/Courier, Fusion, Focus/C-Max, Mondeo, S-Max Mazda: 2, 3

Diesel Setting/Locking & Injection Pump Tool Kit 2.0/2.2 & 2.4 Duratorq 0XAT1556 - Introduction: The comprehensive kit for the timing 2.0/2.2 and 2.4 Duratorq chain drive diesel engines. Include sprocket retaining plate and access cover removal plate, for the injection pump removal/ installation. Prevent the engine shaft (e.g. camshaft, injection pump shaft, crankshaft) to keep in a specific position when changing a timing belt or during other engine repair, and to remove and to replace the injection pump. - Application: Model: Ford: Mondeo 2.0/2.2 TDDi/TDCi (01-07), Transit 2.0/2.2/2.4 TDDi/TDCi (00-08) Jaguar: X-Type 2.0/2.2 D (03-08) LDV: Convoy 2.4 TD/TDi (02-06)

Petrol Engine Setting/Locking Kit For Ford 1.6 Vct – Ti 0XAT1125 - Introduction: The kit covers the timing belt replacement on Ford 1.6 duratec engine with the variable valve timing. Camshaft, crankshaft and flywheel tools are suitable for many other petrol and diesel Ford engines. - Application: Ford: Focus/C Max 1.6 VCT-Ti (03-09) - Engine Code: HXDA

Engine Timing Tool For Ford 1.8 Tddi/Tdci/ Fiesta/Focus/C – Max/Tourneo/Transit 0XAT1169 - Introduction: The timing tool is for Ford 1.8 TDDi / TDCi from 2000 to 2006, including Fiesta / Focus / C-MAX / Tourneo/ Transit with the chain drive engine. - Application: Ford: C-MAX(07-12), Fiesta/Fusion(08-12), Focus(98-12), Focus/C-MAX(03-07), Galaxy(06-12), Grand C-MAX(10-12), Kuga(08-12), Mondeo(07-12), S-MAX(06-12), Tourneo Connect(02-12), Transit Connect(02-12)

53


Timing Tools - FORD Engine Timing Locking Tool Set For Ford & Mazda 0XAT1648 - Introduction: Design for pulling off the camshaft timing belt wheel and locking or positioning the engine output shafts such as the camshaft and the crankshaft. Require for changing the timing belt or the engine repair. - Application: Model: Ford: 1.8 D/TD/TDCi diesel and 1.25 - 2.0 16v Zetec petrol engines, e.g. Fiesta, Fscore /Oruon, Focus, Puma, Sierra, Mondeo, Cougar, Couier/Kombi, P100 Mazda: 121

Engine Timing Locking Tool Set For Ford & Mazda 0XAT1464 - Introduction: The Kit covers later duratec petrol engine. Include the revised design camshaft setting plate and crank TDC location pin. This kit covers the completed range of Ford Duratec engine 1.25 through to 2.0 16v in the both belt and chain drive variant. - Application: Ford 1.25, 1.4, 1.6, 1.7, 1.8 & 2.0 twin cam 16v duratec petrol engines (belt & chain) in : Fiesta/Courier, Fusion, Puma, Focus/C-Max, Mondeo, Cougar, S-Max, Galaxy, Tourneo Connect, Transit Connect

Engine Timing Tool For Ford 0XAT1376 Introduction: A special 4 piece kit contains the necessary special pin required to lock the camshaft sprocket, flywheel and align the crankshaft and fuel pump when checking the valve timing on 2.0 and 2.4 liter chain drive engines and/or replacing the timing belt on 1.4 liter engine. An essential engine timing tool kit is for the GM model, it uses with a number of Ford setting/locking kit for locking the crankshaft in the timed position by locating into the flywheel; Suitable for counter holding the crankshaft when releasing or tightening the crankshaft pulley bolts. Use on a wide range of Ford engine, particularly 1.8 TDDi/TDCi and 2.0 TDCi diesel, 1.6 Ti-VCT and later 1.25/1.4 16v duratec petrol engines. The comprehensive kit for the timing 2.0/2.2 and 2.4 duratorq chain drive diesel engines, it includes sprocket retaining plate locating pin and accesses cover removal plate tools for the injection pump removal/installation. Prevent the engine shaft (e.g. camshaft, injection pump shaft, crankshaft) to keep in a specific position when changing a timing belt or during other engine repaired, removed, and replaced the injection pump.

54


Timing Tools - FORD Crankshaft Pulley Remover & Installer Set For Ford 0XAT1675 - Introduction: The tool of removal and installation is for the maintenance and the replacement. - Application: Model: Ford: Fiesta/Courier (-02) 1.25/1.4/1.6 16v, Puma 1.4/ 1.6 (-98)/1.7 (-02)16v Mazda: 121/1.25 16v

Diesel/Petrol Engine Setting/Locking Combination Kit For Ford – Belt/Chain Drive 0XAT1333 - Introduction: The combination kit of setting and locking tool is suitable for a wide range of Ford petrol & diesel engines. Suitable for the engine fits in Land Rover, Mazda, PSA, Suzuki and Volvo vehicles. The kit consists of the camshaft, the crankshaft/flywheel and the tensioner locking tools, and plus camshaft sprocket remover. - Application: Ford: C-MAX(07-12), Cougar(98-01), Courier(00-02), Fiesta(95-12), Focus(98-12), Focus C-MAX(03-07), Fusion(02-12), Galaxy(06-12), Grand C-MAX(10-12), Kuga(08-12), Maverick(01-07), Mondeo(93-12), Puma(97-02), SMAX(06-12), Tourneo Connect(02-12), Transit(06-11), Transit Connect(02-12)

Diesel/Petrol Engine Setting/Locking Combination Kit For Ford – Belt/Chain Drive 0XAT1887 - Introduction: Contain the tool required to set and lock the engine along with tensioner locking pin. Include the time saving crankshaft pulley alignment tool. - Application: Model: Ford: Fiesta (08-15), Focus (04-15), Mondeo (07-15), B-Max (12-15), C-Max (03-15), Grand C-Max (10-15), Tourneo Connect (13-15), Grand Tourneo Connect (13-15), S-Max (10-15), Galaxy (10-15), Kuga (13-15), Transit Connect (13-15) Volvo: S60 (11-15), S80 (10-15), V40 (10-15), V60 (11-15), V70 (10-15)

55


Timing Tools - FORD Diesel Engine Setting/Locking Tool Kit For Ford, Mazda, Audi, Seat, Volkswagen & Volvo 0XAT1836 - Introduction: 0XAT1836 kit designs to lock the crankshaft, the camshaft and the injection pump at the datum position on a wide range of Ford, Mazda, VW, Audi, Seat, and Volvo diesel engine. - Application: Model: Ford: Fiesta 1.6D, Escort 1.6D, Orion 1.6D, Fiesta 1.8D, Mondeo 1.8 TD, Escort 1.8D/TD (-96), Sierra 1.8 TD, P100 1.8 TD, Fiesta 1.8D, Escort 1.8D/TD, Mondeo 1.8 TD (96-), Galaxy 1.9 TD, Transit 2.4D (-86),Transit 2.5Dl Turbo (84-) Note: CAV Injection Pump - 6.0 Pin/Bosch in Pump - 9.5 Pin Audi: A4 1.9 TDi, 80 1.9D/Turbo D, 80 1.9 TDi, 100 5D, 100D/CD, 100D Turbo, 100 2.5 TD/TDi, A6 2.5 TDi Mazda: 121 1.8D(95-) Seat: Terra 1.3D/1.4D, Ibiza 1.9D/Turbo, Cordoba 1.9D/Turbo, Toledo 1.9D/TD, Alambra 1.9 TDi Volkswagen: Polo 1.3D/1.4D/1.9SDi (AGD), Polo Classic 1.7 SDi/1.9 SDi (AEY), Golf/Jetta/Caddy 1.5D/1.6D/Turbo, Caddy 1.7 SDi/1.9 SDi (AEY), Golf/Vento 1.9 TD/TDi (-94), 1.9 SDi, Passat/Santana D/Turbo, Passat TD/TDi, Sharan 1.9TDi, Transporter 1.6D/1.7D/1.9D/Turbo(-94), 2.4D(-95) LT 2.4D/Turbo D, Transporter 1.9 TD/LT 2.5 TDi Volvo: 240/Turbo, 740D / Turbo, 760D/Turbo, 940D/Turbo

Engine Service Tool Set For Ford/Fiat/ Suzuki/Gm 0XAT1852 - Introduction: Fiat 1.3 JTD | Vauxhall/Opel 1.3 CDTi | Ford 1.3 TDCi | Suzuki Z13DT engine. This set of tool allows the user to check and adjust the camshaft timing, remove and replace the cam chain, and perform the completed engine rebuild whilst maintaining the correct. - Application: Mark

Model Punto Panda Idea Doblo KA Ford Vauxhall/ Agila Corsa-C Opel Combo-C Corsa-D Astra-H Tigre-B Meriva Ingis Suzuki Wagon Swift Fiat

56

Type 1.3 JTD Multi-Jet 1.3 JTD Multi 1.3 JTD Multi 1.3 JTD Multi 1.3 TDCi 1.3 CDTi 1.3 CDTi 1.3 CDTi 1.3 CDTi 1.3 CDTi 1.3 CDTi 1.3 CDTi 1.3 CDTi 1.3 CDTi 1.3 CDTi

Year 2003-2007 2003-2009 2004-2006 2004-2006 2003-2008 2003-2007 2003-2009 2006-2009 2004-2009 2004-2009 2004-2009 2003-2009 2003-2009 2003-2010


Timing Tools - FORD Crankshaft Holding Tool For Ford 0XAT1900 - Introduction: Hand held crankshaft holding tool with a specially designed head profile which permits access via a deep socket to each of the pulley bolts in turn. - Application: For using on Mondeo and Transit models with 2.0 | 2.2 | 2.4 | 3.2 duratorq Di | TDDi | TDCi diesel engines (01-) 2.3 duratec petrol HE. Prevent the crankshaft moving when releasing and tightening the crankshaft pulley fastener.

Engine Timing Tool For Ford 2.2 TDCi Transit 0XAT0503 - Introduction: This kit had developed specifically for the chain drive 2.2 common rail diesel engine fitted in Ford. Transit from around 2006 with the engine number listed below. The kit consists of the component required to lock the crankshaft and cam sprockets in the timed position to allow the removal and replacement of the cam chain and the associated component. - Application: Ford Transit: 2.2 TDCi CYFA 2011, 2.2 TDCi CYFB 2011, 2.2 TDCi DRFA 2011, 2.2 TDCi DRFB 2011, 2.2 TDCi P8FA 2006, 2.2 TDCi P8FB 2006, 2.2 TDCi PGFA 2008, 2.2 TDCi PGFB 2008, 2.2 TDCi QVFA 2006, 2.2 TDCi QWFA 2006, 2.2 TDCi SRFA 2008, 2.2 TDCi SRFB 2008, 2.2 TDCi SRFC 2008, 2.2 TDCi SRFD 2008, 2.2 TDCi SRFE 2008, 2.2 TDCi UHFA 2011, 2.2 TDCi Econetic CYFC 2011, 2.2 TDCi Econetic DRFC 2011, 2.2 TDCi HDT USRA 2011

Engine Timing Tool For Ford 2.0 Ecoboost 0XAT4372 - Introduction: 0XAT4372 is from 0XAT1556 kit increases the application coverage to include 2.4 TDCi engine from 2006. A change in the diesel pump design on the engine prevents the pump removal using the tool from 0XAT1556 kit. Utilize the existing timing pin, it includes the updated tool for the H.P. pump replacement procedure (H.P. pump sprocket retaining and removal tool), and also includes the additional tool that is required when carrying out the engine timing or the crankshaft seal replacement procedure. The tool is the essential - it helps to ensure that the front crankshaft seal is correctly aligned and will not fail prematurely. - Application: Ford duratorq (puma) 2.0, 2.2, 2.4 & 3.2L diesel engines in: Model: Citroen: Relay (06-11), Jumper III Fiat: Ducato (06-11) Ford: Mondeo (00-07), Transit (00-11) Jaguar: X-Type (01-10) Land Rover: Defender (07-11) LDV: Convoy (02-06) Peugeot: Boxer III (06-11)

57


Timing Tools - FORD Engine Timing Tool For Ford 2.0 Ecoboost 0XAT0500 Introduction: Develop specifically for the chain drive 2.0 lt. direct injection petrol engine fitted with the variable valve timing.

Engine Timing Tool For Ford 2.0 Ecoboost 0XAT0502 - Introduction: Introduced in 2011, Ford 1.0 turbo, 3 cylinder, Ecoboost (SCTi) petrol engine fits in the various car and the light commercial vehicle across Ford range. The engine features a wet timing belt (belt in oil) that runs between the crankshaft and the twin camshaft VVT sprocket. The timing belt is a conventional arrangement, the exception is being that the belt encases in the engine and runs in oil in a similar set up as a chain engine. - Application: 1.0 ‘Ecoboost’ 3 cylinder (belt in oil) petrol engine in: Ford: Fiesta, Ecosport, B-Max, Transit Courier, Focus, Transit Connect, C-Max, Tourneo Connect, Grand C-Max

Engine Timing Tool For Ford 2.0 Ecoboost 0XAT0516 - Introduction: 0XAT0516 is from 0XAT1556 kit increases the application coverage to include 2.4 TDCi engine from 2006. A change in the diesel pump design on the engine prevents the pump removal using the tool from 0XAT1556 kit. Utilize the existing timing pin, it includes the updated tool for the H.P. pump replacement procedure (H.P. pump sprocket retaining and removal tool), and also includes the additional tool that is required when carrying out the engine timing or the crankshaft seal replacement procedure. The tool is the essential - it helps to ensure that the front crankshaft seal is correctly aligned and will not fail prematurely. - Application: Ford duratorq (puma) 2.0, 2.2, 2.4 & 3.2L diesel engines in: Model: Citroen: Relay (06-11), Jumper III Fiat: Ducato(06-11) Ford: Mondeo(00-07), Transit(00-11) Jaguar: X-Type(01-10) Land Rover: Defender(07-11) LDV: Convoy(02-06) Peugeot: Boxer III(06-11)

58


Timing Tools - FORD Ford 1.6 Vvt Engine Timing Kit 0XAT0510 - Introduction: The kit covers the timing belt replacement on Ford 1.6 duratec engine with the variable valve timing. The camshaft, the crankshaft and the flywheel pins are also suitable for many other petrol and diesel Ford engines. Use to lock the camshafts in the timed position when the engine repair or the rebuild requiring the cam pulley to be removed and timed. For locking the camshaft in the position to allow the variable valve timing pulley to be removed. The kit covers later duratec petrol engine, it include revised design camshaft setting plate and tensioner pulley locking pin, and also covers the completed range of Ford duratec engine 1.25 through 2.0 16v in the both belt and chain drive variant. - Application: Tensioner Pulley Locking Pin & Crankshaft Locking Tool & Camshaft Sprocket Locking Tool & Flywheel Timing Pin & Camshaft/Crankshaft Pin Ford: Focus/C Max 1.6 VCT-Ti (03-09)

Ford 1.6 Vvt Engine Timing Kit 0XAT1872 - Introduction: The kit covers the timing belt replacement and the timing adjustment on Ford 1.6 Ti-VCT petrol engine. Include VCT setting plate, flywheel locking tools, crankshaft location pin and tensioner locking pin, and also include the camshaft setting plate for the timing adjustment application. 1.6 Ti-VCT petrol engine was first fitted in Focus 2003 and had been since appeared in Fiesta and Mondeo models including FFV variant. - Application: Ford: C-MAX (07-12), Fiesta (08-12), Focus (04-12), Focus C-MAX (03-07),Grand C-MAX (10-12), Mondeo (07-10)

Crank Pulley Holding Tool For Ford 1.8, 2.0, 2.3 Duratec 0XAT1875 - Introduction: Counter - hold the crankshaft pulley while the pulley retaining bolt is loosened/tightened. - Application: Ford: 1.8, 2.0 duratec petrol engines

59


Timing Tools - FORD Camshaft Holding Tool For Fiat/Ford/ Vauxhall/Opel 1.3d 0XAT0603 - Introduction: Use to hold the camshaft pulley whilst loosening or tightening the camshaft gear fixing. - Application: Manufacture Alfa Romeo Citroen Fiat

Ford Lancia Peugeot Suzuki

Vauxhall/Opel

Model Mit Nemo 500 | 500C Doblo | Doblo Cargo Fiorino Grande Punto Idea Linea Panda | Panda Classic Punto | Punto Classic Punto Evo Qubo Ka Musa Ypsilon Bipper Ignis Splash Swift Wagon R+ Agila | Agila B Astra G | Astra H Combo C | Combo D Corsa C | Corsa D Meriva A | Meriva B Tigra B Zafira B

Year 2008-2013 2007-2013 2004-2010 2008-2011 2007-2011 2004-2011 2007-2011 2003-2011 2003-2011 2009-2012 2008-2013 2009-2013 2004-2011 2003-2013 2003-2009 2008-2011 2004-2013 2003-2008 2003-2010 2004-2013 2005-2013 2003-2013 2004-2013 2004-2010 2006-2010

Engine Timing Tool Set - Ford Focus 1.6TDI 0XAT1303 1. For Ford Focus 1.4 /1.6 TDCI chain engines with codes G8DA / G8DB /HNDA 2004-2006 2. Includes camshaft alignment tool, crankshaft alignment tool and crankshaft locking tool

Timing Tool Kit - Ford TDDi/TDCi in 1.8 Fiesta Turbo/Focus/Transit 0XAT1632 1. For Ford TDDi/TDCi 1.8 engine 2. Engine codes C9DC,F9DA/B, C9DA/B,BHDA/BBHPA, HCPA 3. Includes locking strap,flywheel locking tool, TDC setting screw and camshaft sprocket puller

60


Timing Tools - HONDA Master Engine Timing Tool Kit For Honda/ Mazda/Daewoo/Hyundai/ Subaru Vehicle 0XAT1681 - Introduction: This master timing tool kit speciďŹ cally compiles to give a comprehensive range of the engine timing locking tool for the cam belt, the chain and the gear. - Application: For Honda, Mazda, Daewoo, Hyundai, Subaru Important kit is for working on the motor, e.g. the timing belt, the general motor setting, and the camshaft.

Honda & Acura Crankshaft And Harmonic Balancer Holder 0XAT1688 - Introduction: Allow the crankshaft pulley and/or the harmonic balancer bolt to be broken loosing. Include the tool necessary to properly counter rotation of the crankshaft pulley/harmonic balancer during removal and reinstallation of the crank bolt. Secure the pulley in the place does not rotate during removal and reinstallation of the crank bolt. The special design works on Honda and Acura 1990 and the newer model, and Honda Civic 1980 and the newer model. - Application: Utilizing this ďŹ ne product allows the technician more easily that replaces the timing belt on most Honda & Acura engines from 1982 to current.

61

1.6L 1.7L 1.8L 2.0L

4 Cylinder 4 Cylinder 4 Cylinder 4 Cylinder

2.2L

4 Cylinder

2.3L

4 Cylinder

2.7L 3.0L 3.2L 3.5L

6 Cylinder 6 Cylinder 6 Cylinder 6 Cylinder

Civic Integra Integra CRV S2000 Accord Odyssey Prelude Acura CL Accord Odyssey Prelude Acura CL Accord Accord Acura CL Acura Legend Acura TL Odyssey Acura RL

1982+ 1983 1983+ 1997+ 2000+ 1980-1998 1985-1988 1982+ 1997+ 1988+ 1988 1982+ 1997+ 1986+ 1988+ 1987+ 1981-1985 1986+ 1999+ 1996+


Timing Tools - HONDA Cankshaft Pulley Holding Tool Set (Belt/Chain) 0XAT1873 - Introduction: For the crankshaft pulley with the internal hexagon pulley removal requires for the belt replacement application. - Application: Honda: Civic (91-95) | Accord (93-03) | Prelude (92-01) | Shuttle/Odyssey (95-01) Jazz 1.2 / 1.4 Civic 1.4 / 1.6 / 1.7 Legend 3.5 S2000 2.0 CR-V 2.2 CDTi

FR-V 1.7 FR-V2.2 CDTi Stream 1.7 Shuttle / Odyssey 2.2 / 2.3 Accord 1.8 / 2.0 / 2.3 / 2.4 / 3.0 / 2.2 CDTi

Cankshaft Pulley Holding Tool Set (Belt/Chain) 0XAT1839 - Introduction: This tool kit introduces to offer a smaller alternative to the master kit. It designs to offer the special tool listed by Honda application, and the correct size M6 bolt to locks the spring loaded to the cam belt tensioner. - Application: Honda petrol engine, including the twin camshaft engine in Honda and Rover Models - B, D, F and H Series engines. Civic 1.6 VTi/Vtec (91-95) | Accord 1.8, 2.0, 2.2, 2.3 (93-03) Prelude 2.0, 2.2, 2.3 (92-01) | Shuttle 2.2, 2.3 (95-01) | Odyssey 2.2, 2.3 (98-01) Honda Civic 1.6 Vti/Vtec, Integra Type R Accord 1.8/2.0/2.2 Vtec Accord 1.8/2.0/2.2, Prelude 2.0 Accord Coupe 2.0/2.2 Accord Type R, Prelude 2.2 Vtec Accord Aerodeck 2.0/2.2 Accord 2.0 16v, Prelude 2.0 16v Accord Coupe 2.0, Prelude 2.0 Accord 2.3L, Prelude 2.3L Shuttle 2.2/2.3L Rover 216 GTi, 416 GTi

618, 620, 623

Crankshaft Pulley Holder - Honda 0XAT1689 1. Used to counter-hold the crankshaft pulley when loosening/ tightening the retaining bolt 2. For most Honda vehicles fitted with hydraulic PAS 3. Length: 700mm 4. Head Diameter: 50mm

62


Timing Tools - HYUNDAI Belt Tensioner Tool Set For Hyundai /Mitsubishi /Proton – Petrol 1.6, 1.8, 2.0, 2.4, 3.0, 3.5 0XAT1871 - Introduction: The special tool provides in this set requires for refitting of the automatic tensioner after the timing belt replacement on Hyundai, Mitsubishi and Proton engines. - Application: Model: Hyundai: Lantra/Elantra (91-96), Santa Fe (01-06), Sonata (93-98), Trajet (00-05), Sonica (93-01) Mitsubishi: 3000GT (93-00), Carisma (96-05), Challenger (98-00), Colt (88-95), Galant (93-03), Grandis (04-10), L200 (97-06), 300 Series (96-05), 400 Series (96-05), Sapporo (81-90), Lancer (89-08), Outlander (03-07), Shogun/Pajero/Montero(91-07), Shogun Pinin/PajeroPinin (99-06), Montero iO (99-06), Sigma (91-96), Space Gear (95-00), Space Runner (99-04), Space Star (99-06), Space Wagon (92-05) Proton: Persona/Compact (96-05), Satria (96-05), Wira (96-05)

Hyundai/Kia – High Pressure Pump Sprocket Remover 0XAT0011 - Introduction: Removal of high pressure pump. OEM Number: 093312A010 - Application: Carens (UN), Ceed (ED), Ceed (JD), Optima (TF), Rio (UB), Soul (AM), Sportage (SL), Sportage (SLE), Venga (YN), Soul (PS), Cee’d JD - Engine Code: D 1.1 TCi-U2, D 1.4 TCi-U2, D 1.6 TCi-U2, D 1.7 TCi-U2, 1.6 TCi-U2, 1.4 CRDi U2, 1.6 CRDi U2

High Pressure Fuel Pump Tool For Hyundai And Kia 0XAT0015 - Introduction: The essential maintenance tool is for removing the high pressure fuel pump sprocket on Hyundai / Kia model. - Application: Model: Kia: Sorento BL (2003-2009) Hyundai: iLoad (2007 – Present)

63


Timing Tools - LAND ROVER V6 Petrol Engine Setting/Locking Tool Kit For Mg Rover/Land Rover Kv6 0XAT1673 - Introduction: 0XAT1673 kit includes the engine timing belt replacement tool for 2.0 and 2.5 variants of KV6 quad cam engine in MG Rover 825, 45 and 75 MGZS & MGZT/ZT-T (160/180) and Land Rover Freelander models. KV6 quad cam engine evolves over a number of years, and the original version uses a different timing tool combination to the later engine variant. However, some of the timing tools are common to the application. Rover KV6 engine has a front timing belt and two rear camshaft belts, and replacement of 3 belts is required in the kit. - Application: MG Rover: 825 (96-99), 45, 75 MGZS (180), MGZT/ZT-T (160/180) (99-) Land Rover: Freelander (00-)

Diesel Engine Setting/Locking Set For Land Rover, Volvo, Ford 2.0d, 2.2d/ Tdci/Td4 – Belt Drive 0XAT1574 - Introduction: The set contains flywheel locking tools and camshaft locking pin for the engine timing and the timing belt replacement on Land Rover 2.2D TD4, Volvo 2.0D and Ford 2.0/2.2 TDCi engines. - Application: Model: Land Rover: Freelander 2 TD4 (06-12), Range Rover Evoque (11-12) Volvo: C30 (06-10), C70 (06-10), S40 (03-10), S80 (07-10), V50 (04-10), V70 (07-10) Ford: C-MAX (07-12), Grand C-MAX (10-12), Focus (04-12), Focus C-MAX (03-07), Galaxy (06-12), Kuga (08-12), Mondeo (07-12), S-MAX (06-12)

Petrol Engine V8 Setting/Locking Tool Kit For Jaguar/Land Rover 0XAT1543 - Introduction: This V8 petrol engine was first introduced by Jaguar in 1997, and it is still in using today. Land Rover started to use later version of the engine in 2005. There have many changes that both engine capacity and component over the years, but the basic procedure is for checking and adjusting the engine timing and dis mantling, and assembling of front end gear, the timing chain, the camshaft, etc., applies across the engine range. The timing application on the early and the later engines are included in 0XAT1543. - Application: Land Rover: New Rang Rover(06-09), Range Rover Sport(05-09), Discovery III (05-09) Jaguar: XJ8 (97-09), XJR (97-09), S-Type (99-08), XF (08-09), XK8 (97-09), XKR (98-09)

64


Timing Tools - LAND ROVER Crankshaft Pulley Remover/Installer Tool Kit For Jaguar / Land Rover 0XAT1544 - Introduction: The timing adjustment and the overhaul application involving front end, the gear, the timing chain, etc. Require removal of front timing chain cover, and remove that, the crankshaft pulley must be removed. On most variants of the pulley bolt have a very high torque specification, and removal or installation of this pulley requires the special remover and the holding tool in 0XAT1544. - Application: Crankshaft pulley holding tool must be removed for the engine overhaul application / removal of front timing chain cover.

Diesel Engine Setting/Locking Kit For Land Rover 2.5d/Td5 – Chain Drive 0XAT1375 - Introduction: The set comprises flywheel locking pin (threaded) and camshaft locking pin to cover the engine timing in Land Rover TD5 engine in Defender and Discovery models. - Application: The set includes crankshaft and camshaft locking pins for Land Rover with the chain timing engine. Land Rover 2.5 TD5 Diesel Engine Chain Drive Land Rover 90 / 110 / 130 Defender and Discovery

Diesel Engine Setting/Locking Kit For Land Rover, Jaguar, Citroen, Peugeot 2.7d, 3.0d – Tdv6/Sdv6/Tdvi/Hdi – Belt Drive 0XAT1847 - Introduction: The kit of the engine setting/locking tool is for the timing belt replacement on 2.7 and 3.0 V6 diesel engines fitted in Land Rover(TDV6), Jaguar, Citroen and Peugeot vehicles. The kit contains camshaft timing checking pin, flywheel locking tools, coolant pump locking pin and timing belt retaining clip. - Application: Land Rover, Jaguar & PSA (Citroen/Peugeot) 2.7/V6 (TDV6) quad cam diesel engines in: Model: Citroen: C5 III (07-09), C6 (05-09) Jaguar: S-Type (04-08), XF (08-12), XJ (10-12), XJ6 (05-10) Land Rover: Discovery 3 (04-09), Discovery 4 (09-12), Range Rover Sport (05-09) Peugeot: 407 (04-09), 407 Coupe (06-09), 607 (04-11) - Engine Code: 2.7D/TDV6/TDVi: 276DT 2.7D HDi: DT17BTED4 (UHZ) 3.0D HDi: D20CTED4 (X8Z) 3.0D SDV6/TDV6: 306DT, AJ-V6D

65


Timing Tools - LAND ROVER Jaguar/Land Rover (V8) 5.0l Petrol Timing Tool 0XAT4364 - Introduction: The timing tool of the camshaft alignment locks the ring gear. Tension VVT during the timing procedure A1484-4 to allow the camshaft to be locked. - Application: X150–XK (10MY), X250–XF (10MY), X351–XJ (10MY)

Land Rover Tdv8 V8 3.6 Camshaft Crankshaft Timing Crank Locking Tool Kit 0XAT0710 - Introduction: Design execution engine rebuilding or changing the cam chain, locked position, the timing camshaft and crankshaft - Application: Range Rover 3.6 TDV8(2006-11) Range Rover Sport 3.6 TDV8(2006-11) - Engine Codes: 368DT

Diesel Injection Pump Remover & Sprocket Retainer - Land Rover / Rover 0XAT1388 1. Removes the diesel pump and retains the pump sprocket in-situ 2. Sprockets/timing chain configuration remains undisturbed, minimizing the level of engine disassembly 3. Applications: Land Rover; Freelander (Td4), Rover; 75 2.0D(M47R Engine)

Land Rover Fan Clutch Tool Set 0XAT3401 - Introduction: Length: 650 mm Replace fan clutch assembly in Land Rover vehicle. Long and thin design is for easier working in the narrow space. - Application: Discovery 3, Discovery 4, New Range Rover, Range Rover Sport

Diesel EngineTiming Tool kit - 12 PC - Land Rover 0XAT0702 Description: New edc manual transmission timing pin. 200 tdi 300 tdi & 2.5 diesel engines. combubed crankshaft damper puller and fuel pump gear locking tool.

66


Timing Tools - MERCEDES BENZ Mercedes Benz (M271) Alignment Tool Kit 0XAT1393 - Application: Mercedes Benz (M271) (A) - Use for drawing in the timing chain. Retain the timing chain with the camshaft sprocket in mesh. Make it possible to position the camshaft in the installed position. (B) - Make it possible to slacken and tighten the bolts attaching the camshaft gear. (C) - To install the plug into the timing case covering (access to the chain tensioner). (D) - For unloading the timing chain tensioning device. Release the timing chain (1). To do this, (D) in the timing case and push back the tensioning rail (2). (E) - For removal of the crankshaft front gear wheel. Release the timing chain (1).To do this, insert (B) in the timing case and push back the tensioning rail (2).

Timing Chain Guide Tool For Mercedes Benz 0XAT0401 - Introduction: Spring protection replaces the timing chain on the sprocket northwest while cranking the engine. The wave transports sprocket of the camshaft is connected to the correct valve movement while turning the crankshaft to ensure. The new timing chain can be connected to the old chain and pulled through without the skipping in an unexpected engine. - Application: Mercedes Benz: MC OM 651

Timing Tool Kit - Mercedes Benz AMG 156 0XAT1865 - Introduction: The basic position of the camshaft for a 40 crank angle after top dead center. - Application: Mercedes Benz: AMG 156 ML 63, AMG S 63L, AMG S 63, AMG R63, AMG L 4 MATIC R63, AMG 4 MATIC E63, AMG CLS 63, AMG CLK 63, AMG CLK 63, AMG Black Series CLK 63, AMG Cabriolet CL 63

Mercedes Benz Engine Timing Tool Set (M651) 0XAT1905 - Introduction: The retaining device makes it possible to position the camshaft in the installed position, and it is also for turning, installing, and removing the crankshaft pulley. - Application: Mercedes Benz: M651 engine (07~)

67


Timing Tools - MERCEDES BENZ Timing Tool Set For Mercedes Benz 0XAT1063 - Introduction: To assist in the timing chain work and to hold the camshaft in 40 degree TDC position (left / right side). For using on: C-Class (202) 2.4/2.6/2.8/3.2/4.3 (1998-2000), CLK (208) 3.2/4.3/5.4 (1997-2003), E-Class (210) 2.4/3.0 - Application: Camshaft locking tools and spanner for M112 and M113 chain engines Mercedes Benz: C-Class 240/280 (202) (98-), C-Class 240/320 (203) (00-), CL 500 (215) (99-07), CLK 320/430 (208) (97-03), CLK 240/320/500/55 AMG (209) (97-), CLS 500/55 AMG (219) (05-), EClass 240/280/320/430 (210) (97-), E-Class 240/320/500/E55 AMG (211) (02-), M-Class ML320/350/430/500/55 AMG (163) (98-), MClass ML500 (164) (05-), S-Class 280/320/350/430/500 (220) (‘98- ), SL280/320/500 (129) (98-02), SL350/500/55 AMG (230) (02-), SLK 320K (170)(00-04), SLK 55 AMG (171) (04-), R-Class 500 (05-), Viano 3.0/3.2/3.5 (03-), Vito (639) (03-)

Camshaft Timing Tool For Mercedes Benz 1.8/2.1 Cdi 0XAT0404 - Introduction: Specifically design for Mercedes Benz vehicle fits with the chain drive 1.8/2.1 CDi diesel engine (engine code pre-fix 651). The engine is found across Mercedes Benz range, including A, B, C, E, G, and S Class, and Sprinter, and Vito vans from 2007 to 2015. The engine is also found in Jeep and Dodge ranges. - Application: Model Mercedes Benz

Jeep Dodge

68

Model A-Class B-Class C-Class C-Class, Coupe CLA CLS E-Class E-Class, Coupe Cabriolet GLK M-Class S-Class SLK Sprinter Viano Vito Compass Patriot Caliber

Year 2012 to 2015 2012 to 2015 2009 to 2015 2011 to 2015 2013 to 2015 2011 to 2015 2009 to 2015 2009 to 2015 2008 to 2015 2011 to 2015 2010 to 2013 2012 to 2015 2009 to 2015 2010 to 2015 2010 to 2015 2011 to 2015 2010 to 2012 2009 to 2011


Timing Tools - MERCEDES BENZ Timing Tool Set For Mercedes Benz (M270) 0XAT1904 - Introduction: SpeciďŹ cally design for vehicle ďŹ ts with the chain drive 1.6/2.0 direct injection petrol engine. The engine is found in the latest A, B, CLA, C and E class vehicles. Due to the type of construction uses on the engine that camshaft needs to be clamped in the place to allow dismantling and assembly of the cylinder head. Design to allow removal and assembly of the camshaft. - Application: Mercedes Benz: M133 2.0 AMG engine

Mercedes Benz Alignment Tool Set (M275) 0XAT1902 - Introduction: This retaining device is designed for positioning the camshaft in 30 degree TDC position. - Application: M275, M285: The A only uses for left bank of the cylinder and the B & C use for right bank. M137: Use the B & C to loose and tight the mounting screw for the camshaft sprocket and adjusting the timing.

MERCEDES BENZ TIMING TOOL SET (M276) 0XAT1903 - Introduction: Special design aligns the camshaft timing angle for the correct position. - Application: Mercedes Benz: M157, M276, M278 engine

Diesel Timing Tool Set (M642) For Mercedes Benz 0XAT0405 - Introduction: Special design aligns the camshaft timing angle for the correct position. - OEM Number: 642 589 00 31 00 - Application: M642 CDi engine

69


Timing Tools - OPEL Diesel Engine Setting/Locking Kit For Saab/ Vauxhall/Opel 2.0 Dti, 2.2 Dti, 2.2 Tid – Chain Drive 0XAT1286 - Introduction: The setting/locking kit is for the timing 2.0D and 2.2D Ecotec chain drive diesel engines in Vauxhall/Opel and Saab vehicles. The kit includes camshaft setting tool injection pump locking pin, and timing adjustment fixtures. - Application: Model: Vauxhall/Opel: Astra - G (98-06), Vetra - B (97-02), Vetra - C (02-05), Signum (03-05), Omega - B (98-03), Zafira - A (99-05), Sintra (98-99), Frontera - (98-04) Saab: 9-3 (98-04), 9-5 (02-06)

Diesel Engine Timing Tool Kit For Vauxhall/ Opel 1.6/1.7d And Isuzu 0XAT1289 - Introduction: The HL-8013 kit covers a wide range of GM diesel engine from 1.5TD in Corsa to 3.1TD in Monterey. The kit includes cam setting plate and DTI for Opel 1.6 and 1.7D engines, flywheel TDC setting tool for X17DTL(-96), the superseding locking pin for 97- model, and injection pump locking pin introduced for 98 - engine, and also includes the locking bolts for Isuzu diesel engine. - Application: The engine timing and the timing belt renewal on Vauxhall/Opel 1.6/ 1.7D diesel engines and Isuzu 1.5/1.7/2.0/2.2/2.3/2.4/2.5/3.0/3.1 engine. Model: Opel: Astra, Cavalies, Vectra - A (87-00), Isuzu, Nova, Corsa/Combo, Stra, Cavalier, Vectra, Frontera, Monterey, Midi, Brava (88-04) Isuzu: 4EC1, 4EE1, 4JB1, 4XJ1, 4JA1, 4JG1, 4FC1, 4FD1, 4FG1, Z17DT, Y17DT/DTL

Diesel Timing Kit For Vauxhall/Opel & Suzuki 1.3 Cdti/D/Ddis 0XAT1357 - Introduction: Suitable for setting the camshaft and the crankshaft on Vauxhall/Opel and Suzuki chain drive 1.3 diesel engines. The set includes a tensioner locking pin. Prevent the engine shafts (e.g. camshaft, crankshaft) from turning or keeping in a specific position, and adjust the timing belt tensioner when changing a timing belt or during other engine repair. - Application: Model: Vauxhall/Opel: Agila/Corsa/Combo (03-08), Astra - H (05-08), Meriva/Tigra - B (04-08) Suzuki: Ignis/Wagon R (03-08), Swift (04-08)

70


Timing Tools - OPEL Petrol Setting/Locking Tool Kit For Vauxhall/Opel 2.2 16v Twin Cam 0XAT1283 - Introduction: The kit consists of camshaft setting locking and tensioner locking tools for 2.2 chain drive Vauxhall/Opel engine. The essential tool for the engine timing when carrying out the cylinder head work. - Application: Vauxhall/Opel: Astra-G(00-06), Vectra-B(00-02), Vectra-C/Signum(02-08), VX220/Speedster(00-06), Zafira-A/B(00-08)

Water Pump Holding Tool For Vauxhall/Opel 2.2 16v 0XAT1368 - Introduction: Water Pump Holding Tool specifically designs for removing and refitting the water pump without disturbing the timing chain on 2.2 16v engine fitted to Astra-G, Vectra-B/C, Zafira-A, Signum and VX220. - Application: Model: Vauxhall/Opel: Astra - G (00-06), Astra - H (06-11), Signum (03-08), Vectra - B (00-02), Vectra - C (02-08), VX220/Speedster (00-06), Zafira - A (00-05), Zafira - B (05-12) Fiat: Croma (05-09)

Timing Tool Kit For Renault & Vauxhall/ Opel Engines 0XAT1369 - Introduction: Design to cater for DCi 2.2/2.5 diesel chain, the belt and the gear drive engine found in later Nissan light commercial vehicle. - Application: Model: Renault: Espace 2.2 Dci, Master 2.2 Dci, Master 2.5 Dci Vauxhall / Opel: Astra-G 2.2, Movano 2.2 DTi AB, Vectra-B 2.2, Zafira 2.2

Diesel Engine Setting/Locking Kit For Opel 0XAT1639 - Application: Vauxhall/Opel: Astra - G (97-98) - Engine Code: 17DTL

71


Timing Tools - OPEL Petrol Engine Setting/Locking & Coolant Pump Kit For Vauxhall/Opel/ Fiat 2.2 16v – Chain Drive 0XAT1553 - Introduction: The kit consists of camshaft locking tool, tensioner locking pin and coolant pump sprocket retainer for 2.2 chain drive Vauxhall/Opel engine, the engine also fits in Fiat model. The essential tool is for the engine timing when carrying out the cylinder head work and the coolant pump replacement. - Application: Model: Vauxhall/Opel: Astra - G (00-06), Astra - H (06-11), Signum (03-08), Vectra - B (00-02), Vectra - C (02-08), VX220/Speedster (00-06), Zafira - A (00-05), Zafira - B (05-12) Fiat: Croma (05-09)

Diesel Engine Setting/Locking Kit For Vauxhall/Opel, Saab 1.9d Cdti/Tid/ Ttid, 2.0d Cdti – Belt Drive 0XAT1371 - Introduction: Suitable for the timing belt replacement on Vauxhall/Opel and Saab vehicles fitted with 1.9CDTi/TiD engine. The kit contains the camshaft alignment screw, the crankshaft pulley alignment tool and the tensioner pin. - Application: Model: Vauxhall/Opel: Astra - H (04-11), Astra - J (10-12), Insignia (08-12), Signum (04-08), Vectra - C (04-08), Zafira - B (05-12) Saab: 9 - 3 (04-10), 9 - 5 (05-10)

Engine Timing Tool For Opel/Vauxhall/ Saab 1.3 (Chain) & 1.9 (Belt) Cdti Engines 0XAT1500 - Introduction: This timing tool kit specifically designs for Fiat chain drive engine fitted to Vauxhall/Opel/Saab 1.3 CDTi and 1.9 CDTi belt drive models. - Application: Model: Opel / Vauxhall Chain: Agila (1.3 CDTi / D), Astra-H ( 1.3 CDTi / D & 1.9 CDTi / D), Combo-C (1.3 CDTi / D), Corsa-C (1.3 CDTi / D), Meriva (1.3 CDTi / D), Tigra-B (1.3 CDTi / D), Astra (1.9 CDTi / D), Signum (1.9 CDTi / D), Vetra-C (1.9 CDTi / D), Zafira-B (1.9 CDTi / D) Saab Belt: 9-3 (1.9 TiD & 1.9 TTiD), 9-5 (1.9 TiD)

72


Timing Tools - OPEL Engine Timing Locking Tool Set 0XAT1442 Introduction: A comprehensive 16 piece set of engine timing locking tool is for the camshaft, the crankshaft and the flywheel for Citroen/Fiat/Ford/Opel/Peugeot/Renault/Rover/Vauxhall/ Volkswagen.

26 Pcs Timing Tool Set For OPEL / VAUXHALL (GM) 0XAT1546 - Application: Lock the camshaft and the crankshaft, removal and assembly of the fuel injection pump and the water pump, change the timing belt. Suitable for the identical engine, e.g. Saab, Renault, etc. - Diesel Motor 1.3 CDTi 16v, 1.9 CDTi, 2.0 DTi, 2.2 DTi Pass end for Z.B. Agila, Astra, Combo-C, Corsa, Frontera, Omega, Signum, Sintra, Tigra, Vectra, Zafira

Timing Tool Set For OPEL/VAUXHALL (GM) 0XAT1549 - Introduction: Changing the timing belt and suitable for the identical engine e.g. Saab, Renault, etc. Locking the camshaft and the crankshaft. - Application: Diesel engine 1.3CDTi 16v, 1.9CDTi, 2.0DTi, 2.2DTi For Agila, Combo-C, Corsa, Frontera, Omega, Sintra, Tigra Petrol engine 1.0 12v / 1.2 16v (since 97) 1.4 / 1.6/ 1.8 / 2.0 / 2.2 16v (since 95) For Agila, Astra, Corsa, Frontera, Omega, Sintra, Speedster, Tigra, Vectra, Zatira

Petrol Engine Setting/Locking Kit For SAAB & VAUXHALL/OPEL 2.5, 2.6, 3.0, 3.2 V6 – BELT DRIVE 0XAT1579 - Introduction: The essential setting/locking tool is for the timing belt replacement on V6 2.5 - 3.2 multi - valve engine in Vauxhall/Opel and Saab models. The kit includes belt guide roller adjuster/socket required during the belt tensioning procedure. - Application: Model: Vauxhall/Opel: Calibra (93-98), Cavailier/Vectra - A (93-95), Omega - B(94-03), Signum (03-05), Sintra (96-99), Vectra - B (92-02), Vectra - C(02-05) Saab: 900(93-98), 9000(95-97), 9-5(98-03)

73


Timing Tools - OPEL Petrol Engine Setting/Locking Kit For ALFA ROMEO, CHEVROLET, FIAT, SAAB, VAUXHALL/ OPEL 0XAT1669 - Introduction: The kit comprises camshaft setting tools and tensioner locking pin. Suitable for the engine timing application on 1.4, 1.6 and 1.8 twin port engines - belt drive. - Application: Model: Alfa Romeo: 159 (05-10) Chevrolet: Aveo (08-11), Cruze (09-12), Orlando (11-15), Trax (13-15) Fiat: Croma (06-11), Stilo (05-08) Saab: 9-5 (10-12) Vauxhall/Opel: Astra - G Classic II (03-10), Astra - H Classic (04-11), Astra - J(09-12), Corsa-D (07-14), Insignia (08-12), Meriva - A (06-10), Signum (06-08), Vectra - C (06-08), Zafira - B (05-12), Mokka (12-15)

Flywheel Locking Tool For Vauxhall 1.8 / 2.0 0XAT1153 - Introduction: For locking the flywheel when changing the cam belt. - Application: For Corsa-C/Astra-G/Vectra/Zafira 1.4/1.6 16v engine.

Petrol Engine Setting/Locking & Coolant Pump Kit FOR VAUXHALL/OPEL, FIAT 2.2 16v – CHAIN DRIVE 0XAT1685 - Introduction: The kit consists of camshaft setting plate and tensioner locking pin, coolant pump sprocket retainer, and crankshaft pulley holding tool for 2.2 chain drive Vauxhall/Opel engine, the engine is fitted in Fiat model. The essential tool is for the engine timing when carrying out the cylinder head work and the coolant pump replacement. - Application: Model & Engine Code: Fiat: Croma (05-09) 2.2 16v: 194A1.000 Vauxhall/Opel: Astra - G (00-06), Astra - H (06-11), Signum (03-08), Vectra - B (00-02), Vectra - C (02-08), VX220/Speedster (00-06), Zafira - A (00-05), Zafira - B (05-12) 2.2 16v: Z22SE, Z22YH

OPEL Spx Kent – Moore Special Tool 0XAT0605 - Introduction: Fix the crankshaft and the camshaft in the TDC position.

74


Timing Tools - OPEL Petrol Engine Setting/Locking Kit FOR VAUXHALL/OPEL/SUZUKI 1.0/1.2/1.4 – CHAIN DRIVE 0XAT1265 - Introduction: Include the locking tool is for 1.0, 1.2, 1.4 Ecotec/Ecoflex (code X and Z) chain engines, and also includes the timing disc position gauge for the timing sensor on the inlet camshaft. - Application: Model: Vauxhall/Opel: Agila (00-08), Astra - G (98-06), Astra - G Classic II (03-10), Astra - H (04-11), Combo(04-12), Corsa - B (97-00), Corsa - C (00-07), Corsa - D (06-12), Meriva-A(04-10), Tigra - B(04-10) Suzuki: Wagon R(05-08)

Engine Timing Tool For VAUXHALL/OPEL 0XAT1867 - Introduction: Design to lock the cam and the crankshaft in the position to allow removal and replacement of the timing chain fitted to Vauxhall/Opel twin cam engine. - Application: Manufacture

Vauxhall Opel

75

Model Adam Adam Adam Ampera Astra-J Astra-J Astra-J Astra-J Astra-J Corsa-D* Corsa-D Corsa-D Corsa-D Corsa-D Corsa-D Corsa-D Insignia Meriva-B Meriva-B Meriva-B* Mokka Zafira-C Tourer Zafira-C Tourer* Aveo Aveo Aveo Aveo Aveo*

Size 1.2 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.0 1.2 1.2 1.2 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.2 1.2 1.2 1.4 1.4

Year 2012 2012 2012 2011 2009 2009 2011 2009 2011 2009 2009 2009 2011 2009 2009 2012 2011 2010 2010 2011 2012 2011 2011 2011 2011 2011 2011 2011


Timing Tools - OPEL Petrol Engine Setting/Locking Kit FOR VAUXHALL/OPEL, CHEVROLET, SAAB, ALFA ROMEO, FIAT – 1.4, 1.6, 1.8 TWIN PORT – BELT DRIVE 0XAT1669A - Introduction: The kit comprises camshaft setting plate and timing belt tensioner locking pin. Suitable for the timing application on 1.4, 1.6 and 1.8 twin port petrol engines with the belt drive. - Application: Model: Vauxhall/Opel: Astra - G (03-10), Astra - H (04-13), Astra - J (09-13), Corsa - D (07-13), Insignia (08-13), Meriva - A (06-10), Signum (06-08), Vectra - C (06-08), Zafira - B (05-13), Zafira - C Tourer (11-15) Chevrolet: Aveo (08-13), Cruze (09-12), Orlando (11-15) Saab: 9-5 (10-12) Alfa Romeo: 159 (05-10) Fiat: Croma (06-11), Stilo (05-08)

Petrol Engine Setting/Locking Kit For Vauxhall/Opel/Chevrolet 1.0, 1.2 & 1.4 Chain Drive 0XAT1868 - Introduction: The setting & locking kit covers a wide range of Vauxhall/Opel and Chevrolet petrol engine. Include the necessary tool for setting and locking the camshaft and crankshaft for locking the timing chain tensioner. - Application: Vauxhall/Opel/Chevrolet 1.0, 1.2, 1.4 petrol engines (chain) fit to: Model: Cadillac: ELR (2014) Chevrolet: Aveo (2011-2015), Cruze (2011-2015), Volt (2012-2014), Trax (2013-2015), Orlando (2011-2015) Holden: Volt (2012-2014) Vauxhall/Opel: Agila (2000-2003), Agila-B (2008-2010), Adam (2012-2015), Ampera (2011-2015), Corsa-C (2000-2014), Corsa-D (2006-2014), Insignia (2011-2015), Meriva-B (2010-2015), Mokka (2012-2015), Zafira-C Tourer (2012-2015), Cascada (2013-2015), Astra-J (2009-2015)

Engine Timing Tool Kit – Vauxhall/Opel 1.6 Cdi 0XAT0711 - Introduction: This kit provides the essential tools required to set and time the main engine components when replacing the camshaft drive chain. The new engine design has also meant the need for a new engine timing kit. In 2013 Opel/Vauxhall launched a new 1.6 ecoFLEX diesel engine across their range. - Application: VAUXHALL/OPEL: Astra-J/ Meriva-B/Mokka/Zafira-C Toure 1.6 CDi ecoFLEX CDTi (2013-2016)

76


Timing Tools - OPEL Engine Timing Tool Kit – Vauxhall/Opel, Saab, Chevrolet 0XAT0602 - Introduction: Provides 2.0 liter and 2.4 liter twin cam turbo charged petrol engines found across the GM, Saab and Chevrolet. This tool provides all the components required to set and hold the camshafts, crankshaft and chain tensioner components when performing major engine work or replacing the cam chain and associated components. - Application: Manufacture Model Type 2.0 Liter 2.4 Liter Astra Vauxhall/Opel Insignia OPC OPC/VXR A24XE LHU/A20NFT Antara A24XF Turbo LTG/A20NHT Captiva LE5 E85 LDK/A20NHT HHR Chevrolet LE9 Turbo T-Bi Power Malibu 9-5 Saab

Timing Tool Kit - Vauxhall/Opel/GM 0XAT1037 1. For General Motors/SAAB V6 belt driven engine on 2. 5/2.6/3.0 2. With raised edge on the tensioner pulley 3. Fitted to Vauxhall/Opel Vectra-B, Omega-B, Sintra, Calibra with engine codes X25XE,X30XE, Y26SE, Y32SE 4. Saab 9-5 3.0 V6 with engine code B308E 5. OEM Codes: KM 800-10/800-20/800-1/800-2/800-30 6. Contents: -RH Camshaft Locking Tool / -LH Camshaft Locking Tool -Crankshaft Locking Tool / -Camshaft Timing Gauge -Belt Holding Tool / -Holding Screw

Twin Cam Locking Set - Vauxhall/Opel EcoTec 0XAT1358 1. Fit Vauxhall/Opel EcoTec petrol engines 2. Applications: Vauxhall/Opel; EcoTec Petrol Engines 1.4, 1.6, 1.8, 2.0 &2.2 16v Engines

Diesel Engine Locking Kit - Nissan, Renault dCi,Vauxhall/Opel - Belt Drive 0XAT1266 1. For timing belt replacement on a wide range of Renault,  Nissan & Vauxhall/Opel diesel engines 2. Applications: Renault; Avantime (05-07), Clio II (01-06), Clio III (05-08), Espace (00-08), Kangoo (00-08), Laguna (99-01), Laguna II (04-07), Master (00-06), Megane (99-03), Megane II (02-08), Modus (04-08), Scenic (99-03), Scenic II (03-08), Trafic (01-08), wingo (07-08), Nissan; Almera N16 (02-06), Interstar (02-06), Kubistar (03-08), Micra K12 (03-08), Note (06-08), Primastar (02-07), Primera P12 (03-07), Qashqai (08-09), Vauxhall/Opel; Movano (00-08), Vivaro (01-08)

77


Timing Tools - PORSCHE Porsche Cayenne Camshaft Alignment Tool 0XAT1861 - Introduction: This tool designs to adjust the timing for the camshaft. Use to R&R crankshaft pulley bolt. 2009 Porsche Cayenne Turbo (9 PA) V8 - 4.8L turbo camshaft adjustment. Set the camshaft timing on 4.8 liter DFi engine. - Application: For Cayenne V8 up to 2007 and from 2008 Cayenne and Panamerica

Setting & Locking Kit For Porsche 911 & Boxster Chain Drive Petrol Engines 0XAT1862 - Introduction: Setting and locking kit is for Porsche 911 and Boxster. Fit the range of Porsche 911 & Boxster series 986 and 996 engines. Some Boxster 987 and 997 series engines will be covered in this kit. Contain the essential tool to set and lock the engine for the timing purpose, and to reďŹ t the gauge on pin and cir - clip during reassembly after major engine work. - Application: Porsche: 911 (97-01), Boxster (97-02)

Porsche Cayenne Camshaft Alignment Timing Tool Kit 911 0XAT1863 - Introduction: Comprehensive tool kit allows the proper camshaft timing on Porsche 997 series. This product should be used with 0XAT1862 - Application: Alignment lock camshaft in top dead center so that the cam can be accurately aligned - 996, 997 as of 2005. Camshaft Alignment Gauge for M97/01 TDC Locating Pin Short for 997 Porsche: 997

Engine Timing Tool Set For Porsche 0XAT0708 - Introduction: Use to rotate and align the crankshaft and the camshaft. - Application: 987, 981, 997, 991 ďŹ&#x201A;at engines

78


Timing Tools - PSA Engine Timing Tool Set For Citroen & Peugeot 0XAT1263 Application: This comprehensive set of tool enables the correct engine timing to be made when replacing the timing belt. Suitable for using on the most recent cars with either HPi petrol or HDi diesel engines.

Timing Kit For Citroen & Peugeot 1.8 & 2.0 0XAT1533 - Introduction: The essential tool is for the timing belt replacement on 1.8 and the petrol “EW code” engines. Feature flywheel/drive plate locking tool, tensioner pulley adjusting and locking tool. Many of the timing pins are also suitable for other petrol/ diesel PSA engine. - Application: Manufacture

Citroen

Peugeot

Model Xsara Picasso Xsara Picasso C4 C5 C5 C5 Evasion Synergie C8 Jumpy Dispatch 206 206CC 307 307CC 406 Coupe 407 406 Coupe 607 806 807 Expert

Style 1.8 16v 2.0 16v 2.0 16v 1.8 16v 2.0 16v 2.0 HPi 2.0 16v 2.2 16v 2.0 16v 2.0 16v 2.0 16v 1.8 16v 1.8/2.0 2.0 HPi 2.0 16v 2.0 16v 2.0 16v 2.0 16v

Year 9902-05 04-07 00-02 00-04 00-04 00-02 02-07 00-07 00-07 01-05 00-04 04-06 00-04 00-07 00-02 02-05 00-07

Engine Timing Tool For Citroen/ Peugeot 1.8/2.0 0XAT1655 - Introduction: A selection of the timing pin for using on Citroen and Peugeot vehicles with the petrol and the diesel engines. Include crankshaft timing pins and tensioning tool. - Application: For using on the popular petrol engine to enable the timing pulley to be locked into the place whilst servicing the camshaft and the cam belt replacement. Fiat Ulysee 1.8/2.0 Turbo Ducato 2.0

79


Timing Tools - PSA Master Timing Tool Kit For Peugeot & Citroen 0XAT1541 - Introduction: This comprehensive set of tool enables the correct engine timing to be made when replacing the timing belt. Suitable for using on the most recent cars with either HPi (petrol) or HDi (diesel) engine. - Application: Model: Citroen: Xsara | Berlingo, Dispatch 1.9D, Xsara | Picasso, Xantia C5 Synergie, Berlingo Dispatch Relay, 2.0 HDi, C4 C5, Evasion | Synergie, 2.0 Turbo, C8, Jumpy | Dispatch Peugeot: 206 | 206CC, 307 | 307CC, 406 | Coupe, 406 | Coupe, 406 | 607, 407, 607, 806, 807, Expert, 206 306 Expert, Partner, 1.9D

Valve Spring Compressor For PSA 0XAT1625 - Introduction: Valve Spring Compressor uses to free the camshaft from the tension created by contacting with the valve and enables the correct tension to be applied to the timing belt. - Application: Valve Spring Compressor is for Citroen/Peugeot 1.1/1.4 engine from 1993/1994 For using on Citroen Berlingo | AX | AX GTi | ZX | Xsara, Peugeot 106 | 205 | 306 | 307 | 405, and partner with 1.0 | 1.1 | 1.4 | 1.6 engines

Timing Tool For Citroen/Peugeot Dw 8 – Dw 10 – Dw 12 (Hdi) Engine 0XAT1686 Introduction: This comprehensive tool kit uses for the correct engine timing when replacing the timing belt. Suitable for using on the most popular cars with the either petrol or diesel engine, as detailed below.

Diesel Injector Puller For Citroen/Peugeot 0XAT1756 Introduction: The comprehensive set is for removing Citroen/Peugeot 2.0/2.2 HDi fuel injector. Allow the removal of seized injector without the need to remove the cylinder head. Bridge fits perfectly on the cylinder head to prevent the damage to the area surrounding the injector.

80


Timing Tools - PSA Diesel & Petrol Engine Setting/Locking Tool Kit For Citroen/Peugeot Including Cam & Direct Injection Engines 0XAT1837 Introduction: The huge of PSA petrol and diesel engines require a comprehensive selection of the setting/locking pin and tensioner tool for the timing belt replacement/ renewal, and 0XAT1837 provides these tools in one kit. Both the petrol and the diesel application are covered, including 1.6, 1.8 and 2.0 twin cam engines and directing the injection diesel engine. In additional to the essential “difficult access” flywheel pin, it specifically is dimensions for each application - pair and single - is included as well as a range of tensioner locking and adjusting tool.

Petrol Engine Setting & Locking Kit – Tu3/Et3 1.4 8v/16v For Citroen/ Peugeot – Belt Drive 0XAT1845 - Introduction: Suitable for PSA ET3 code twin camshaft engine. Supply with the timing tool required for the timing belt replacement on TU3 1.4 single camshaft engine. The kit includes camshaft and flywheel locking pins, tensioner locking pin and timing belt retaining clip. - Application: Model: Citroen: Berlingo I/II/First (97-11), C2 (03-10), C3 I/II/First/ Classic (02-10), C3 III (10-13), C3 Pluriel (03-10), C4 (04-11), Saxo (96-03), Xsara I/II (97-04), Nemo (08-15) Peugeot: 1007 (05-10), 206 (98-09), 206+ (09-13), 207 (06-13), 307 (01-08), Bipper (08-15), Partner (05-11)

Setting & Locking Kit For Peugeot/Citroen 1.0 Vti/1.2 Vti – Belt Drive Petrol Engine 0XAT0709 - Introduction: The setting and locking kit is for 1.0 VTi and 1.2 VTi Peugeot/Citroen three cylinder belt drive petrol engines. - Application: Model: Citroen: C3 III (12-15), DS3 (12-15), C-Elysee (12-15), C4 Cactus (14-15) Peugeot: 208 (12-15), 2008 (13-15), 308 (13-15)

81


Timing Tools - RENAULT Engine Timing Tool For Reanult Master Kit 0XAT1268 - Introduction: This kit is originally specified for the engine design before 2003. However, some components are used on engine up to 2010. - Application: Petrol: 1.2L | 1.4L | 1.7L plus twin cam 1.4L | 1.6L | 1.8L | 2.0L 16v & 2.2L 8v plus 2.5 20v Model: Clio 1.2/1.4, Clio 1.4/1.6/1.8 16v, Clio Sport 2.0 16v, Clio Williams 2.0 16v, Espace 2.0, Espace 2.0 16v, Espace 2.2 TD, Express 1.4, Extra 1.4, Kangoo 1.2/1.4, Laguna 1.6 16v, Laguna 1.8/2.0, Laguna 1.8/2.0 16v, Laguna 2.2 D/TD, Laguna 2.5 D/TD, Megane 1.4/1.6/2.0/ 16v, Megane 2.5D/TD, R19 1.4, R19 1.4 Eco, R19 1.8 16v, Rapid 1.4, Safrane 2.0 16v, Safrane 2.2 TD, Safrane 2.5 20v, Scenic 1.4/1.6/2.0 16v, Trafic 2.5D, Twingo 1.2 Diesel: 1.9L D / TD / DTi | 2.1L & 2.2L D / TD | 2.5L D / TD | 2.8L D

Petrol Engine Setting/Locking Kit For Renault/Nissan/Vauxhall/Opel 1.4, 1.6, 1.8, 2.0 16v 0XAT1269 - Introduction: Suitable for the timing belt replacement on 1.4, 1.6, 1.8 and 2.0 engines fits in Renault vehicle. - Application: Model Year Clio II (99-06) Clio III/Sport (05-12) Espace/Grand Espace (98-02) Espace/Grand Espace IV (02-10) Kangoo/Trekka (01-09) Laguna (98-01) Laguna II (01-07) Renault Laguna III (07-10) Megane (99-03) Megane II (02-10) Megane III/Sport (08-12) Megane/Scenic (99-00) Scenic/RX4 (99-03) Scenic/Grand Scenic II (03-09) Trafic II (01-11) Kubistar X76 (03-09) Nissan Primaster X83 (02-11) Vauxhall/Opel Vivaro (01-11)

Petrol Engine Setting/Locking Kit For Renault/ Nissan/Vauxhall/Opel 1.4, 1.6, 1.8, 2.0 16V 0XAT1557 - Introduction: Suitable for the timing belt replacement on 1.4, 1.6, 1.8 and 2.0 engines fits in Renault vehicle. - Application: Camshaft Pulley Setting Tool Fit Clio II/III Kangoo, Laguna, Modus, Megane II, Scenic, Grand Scenic - Engine Code: K4M (2001-2010)

82


Timing Tools - RENAULT Petrol Engine Setting/Locking Kit For Renault/Nissan/Vauxhall/ Opel 1.4, 1.6, 1.8, 2.0 16V 0XAT1270 - Introduction: Suitable for the timing belt replacement on 1.4, 1.6, 1.8 and 2.0 engines fits in Renault vehicle. - Application: Model Renault

Nissan Vauxhall/Opel

Clio II Clio III/Sport Espace/Grand Espace Espace/Grand Espace IV Kangoo/Trekka Laguna Laguna II Laguna III Megane Megane II Megane III/Sport Megane/Scenic Scenic/RX4 Scenic/Grand Scenic II Trafic II Kubistar X76 Primaster X83 Vivaro

Year (99-06) (05-12) (98-02) (02-10) (01-09) (98-01) (01-07) (07-10) (99-03) (02-10) (08-12) (99-00) (99-03) (03-09) (01-11) (03-09) (02-11) (01-11)

Diesel Locking Kit For Renault/Nissan Dci, Vauxhall/Opel Di/Dti/Cdti 0XAT1266 Application: Model: Renault: Avantime (05-07), Clio II (01-06), Clio III (05-08), Espace (00-08), Kangoo (00-08), Laguna (99-01), Laguna II (04-07), Master (00-06), Megane (99-03), Megane II (02-08), Modus (04-08), Scenic (99-03), Scenic II (03-08), Trafic (01-08), Twingo (07-08) Nissan: Almera N16 (02-06), Interstar (02-06), Kubistar (03-08), Micra K12 (03-08), Note (06-08), Primastar (02-07), Primera P12 (03-07), Qashqai (08-09) Vauxhall/Opel: Movano (00-08), Vivaro (01-08)

Petrol Engine Setting/Locking Set For Renault 2.0 16v Ide – Belt Drive 0XAT1394 - Introduction: The set includes the crankshaft locking pin and the camshaft locking plate for the timing belt replacement. Suitable for Renault 2.0 16v IDE twin cam petrol engine found in Laguna II and Megane vehicles. - Application: Renault: Megane (99-03), Laguna II (01-05), Laguna 2.0 IDE (2001-2005) / F5R Engine Include the camshaft setting bar, the TDC crankshaft timing pin

83


Timing Tools - RENAULT Petrol Engine Setting/Locking Kit For Renault/Nissan/Vauxhall/ Opel 1.4, 1.6, 1.8, 2.0 16v 0XAT1653A - Introduction: This kit of four tools enables the correct engine timing to perform on Renault K4J, K4M, F4P and F4R engines when changing the timing belt. - Application: Manufacture Model Year Renault Clio II (99-06) Clio III/Sport (05-12) (98-02) Espace/Grand Espace Espace/Grand Espace IV (02-10) (01-09) Kangoo/Trekka Laguna (98-01) Laguna II (01-07) (07-10) Laguna III Megane (99-03) (02-10) Megane II (08-12) Megane III/Sport Megane/Scenic (99-00) Scenic/RX4 (99-03) (03-09) Scenic/Grand Scenic II Trafic II (01-11) (03-09) Nissan Kubistar X76 Primaster X83 (02-11) Vauxhall/Opel Vivaro (01-11)

Engine Camshaft Sprocket Locking Device For Renault/Nissan/Vauxhall / Opel 1.8, 2.0 16V 0XAT1150 - Introduction: Engine camshaft sprocket locking device updates the timing belt replacement procedure for the engine detailed below. Require the examination of the crankshaft to determine acceptance of the new crank gear with the integral Woodruff key, and release of the camshaft sprocket bolts required that use of the locking device. - Application: Model: Renault: Clio II (99-06), Clio III/Sport (06-09), Espace/Grand Espace (98-02), Espace/Grand Espace IV (02-10), Laguna (98-01), Laguna II (01-07), Laguna III (07-13), Megane (99-03), Megane II (02-10), Megane III/Sport (08-13), Megane/Scenic (99-00), Scenic/RX4 (99-03), Scenic/Grand Scenic II (03-09), Trafic II (01-11) Nissan: Primastar X83 (02-11) Vauxhall/Opel: Vivaro (01-11) 1.8 16v F4P: 720/722/760/770/771/772/773/774/775 2.0 16v F4R: 700/701/712/713/714/715/720/722/730/732/740/741/ 744/746/762/763/764/765/766/767/770/771/774/776/ 780/784/786/787/790/792/791/792/794/795/796/797/ 800/802/810/811/820/830/832/867/870/874/886/887/ 896/897

84


Timing Tools - RENAULT Timing Injection Pump Holder For Renault 0XAT1618 - Introduction: This locking tool enables the diesel pump to be locked in the position whilst servicing the timing belt on Renault 1.9 DTi engine. - Application: Injection pump locking tool for Renault Clio, Megane, Laguna, Kangoo 1.9 DTi engines.

Diesel Engine Locking Tool Set For Renault /Nissan/Vauxhall/Opel Di/ Dti/Cdti 0XAT1896 - Introduction: The essential tool is for the timing belt replacement on a wide range of Renault, Nissan and Vauxhall/Opel diesel engine. - Application: Model: Renault: Avantime (05-07), Clio II (01-06), Clio III (05-08), Espace (00-08), Kangoo (00-08), Laguna (99-01), Laguna II (0407), Master (00-06), Megane (99-03), Megane II (02-08), Modus (04-08), Scenic (99-03), Scenic II (03-08), Trafic (01-08), Twingo (07-08) Nissan: Almera N16 (02-06), Interstar (02-06), Kubistar (03-08), Micra K12 (03-08), Note (06-08), Primastar (02-07), Primera P12 (03-07), Qashqai (08-09) Vauxhall/Opel: Movano (00-08), Vivaro (01-08)

Petrol Engine Setting/Locking Kit For Renault/Nissan/Vauxhall/Opel 1.4, 1.6, 1.8, 2.0 16v 0XAT1912 - Introduction: The updated kit is suitable for the timing belt replacement on 1.4, 1.6, 1.8 and 2.0 engines fits in Renault vehicle. The engine requires use of the associated tool, the petrol engine camshaft sprocket locking device - Renault 1.8, 2.0 belt drive, the petrol engine camshaft sprocket locking device - Renault 1.8, 2.0 belt drive or the petrol engine camshaft sprocket holding tool - Renault 1.4, 1.6 belt drive ~ camshaft sprocket holding tool, to loosen the camshaft sprocket bolts. - Application: Model: Renault: Avantime (00-03), Clio II(99-06), Clio III/Sport(06-09), Espace/Grand Espace (98-02), Espace/Grand Espace IV(02-10), Kangoo/Trekka (01-09), Kangoo II/Be Bop (08-12), Laguna (98-01), Laguna II (01-07), Laguna III (07-13), Logan/MCV (05-11), Megane (99-03), Megane II (02-10), Megane III/Sport (08-13), Megane/Scenic (99-00), Modus (04-08), Modus/Grand Modus II (08-13), Scenic/RX4 (99-03), Scenic/Grand Scenic II (03-09), Scenic/Grand Scenic III (09-13), Twingo II/Sport (08-13), Trafic II (01-11), Vel Satis (00-10) Nissan: Kubistar X76 (03-09), Primaster X83 (02-11) Vauxhall/Opel: Vivaro (01-11)

85


Timing Tools - RENAULT Petrol Engine Setting/Locking Kit For Renault/Nissan/Vauxhall/Opel 1.4/ 1.6/1.8/2.0 16v 0XAT1759 - Introduction: The updated kit is suitable for the timing belt replacement on 1.4, 1.6, 1.8 and 2.0 engines fits in Renault vehicle. The engine requires use of the associated tool, the camshaft sprocket holding tool, to loosen the camshaft sprocket bolts and the timing belt guide roller wrench. The kit features the updated camshaft setting plate which avoids the camshaft position sensor on later 1.4 and 1.6 engines. - Application: Model: Renault: Clio II(99-06), Clio III/Sport(05-12), Espace/Grand Espace (98-02), Espace/Grand Espace IV(02-10), Kangoo/Trekka (01-09), Laguna (98-01), Laguna II (01-07), Laguna III (07-10), Megane (99-03), Megane II (02-10), Megane III/Sport (08-13), Megane/Scenic (99-00), Modus (04-08), Modus/Grand Modus II (08-12), Scenic/RX4 (99-03), Scenic/Grand Scenic II (03-09), Trafic II (01-11), Twingo II/Sport (08-12) Nissan: Kubistar X76 (03-09), Primaster X83 (02-11) Vauxhall/Opel : Vivaro (01-11)

Diesel Engine Locking Tool Set For Opel/ Renault/Nissan 1.5/1.9/2.2/2.5 Dci(Vans) 0XAT1519 - Introduction: This kit is originally specified for the engine design before 2003. However, some components are used on the engine up to 2010. The essential tool is for the timing belt replacement on a wide range of Renault, Nissan & Vauxhall/Opel diesel engine. This locking tool enables the diesel pump to be locked in the position whilst servicing the timing belt on Renault 1.9 DTi engine. - Application: Petrol: 1.2L | 1.4L | 1.7L plus twin cam 1.4L | 1.6L | 1.8L | 2.0L 16v & 2.2L 8v plus 2.5 20v Model: Clio 1.2/1.4, Clio 1.4/1.6/1.8 16v, Clio Sport 2.0 16v, Clio Williams 2.0 16v, Espace 2.0, Espace 2.0 16v, Espace 2.2 TD, Express 1.4, Extra 1.4, Kangoo 1.2/1.4, Laguna 1.6 16v, Laguna 1.8/2.0, Laguna 1.8/2.0 16v, Laguna 2.2 D/TD, Laguna 2.5 D/TD, Megane 1.4/1.6/2.0/ 16v, Megane 2.5D/TD, R19 1.4, R19 1.4 Eco, R19 1.8 16v, Rapid 1.4, Safrane 2.0 16v, Safrane 2.2 TD, Safrane 2.5 20v, Scenic 1.4/1.6/2.0 16v, Trafic 2.5D, Twingo 1.2 Diesel: 1.9L D / TD / DTi | 2.1L & 2.2L D / TD | 2.5L D / TD | 2.8L D Renault: Avantime (05-07), Clio II (01-06), Clio III (05-08), Espace (00-08), Kangoo (00-08), Laguna (99-01), Laguna II (04-07), Master (00-06), Megane (99-03), Megane II (02-08), Modus (04-08), Scenic (99-03), Scenic II (03-08), Trafic (01-08), Twingo (07-08) Nissan: Almera N16 (02-06), Interstar (02-06), Kubistar (03-08), Micra K12 (03-08), Note (06-08), Primastar (02-07), Primera P12 (03-07), Qashqai (08-09) Vauxhall/Opel: Movano (00-08), Vivaro (01-08)

86


Timing Tools - RENAULT Diesel Engine Setting / Locking Tool Kit For Renault, Nissan, Vauxhall/Opel 2.0 & 2.3 Dci/ Cdti – M9r/M9t Chain 0XAT1563 - Introduction: Suitable for setting and locking 2.0 & 2.3 DCi/CDTi chain drive engines fit in Renault, Nissan and Vauxhall/Opel models with M9R/M9T engine code. - Application: Model: Nissan: Primastar X83 (06-10), Qashqai/Qashqai+2 J10 (07-10), X-Trail T31 (07-12) Renault: Espace/Grand Espace IV (06-10), Kaleos (08-11), Laguna II (05-07), Laguna III (07-12), Master III (10-12), Mengane II (06-10), Scenic/Grand Scenic II (06-09), Scenic/Grand Scenic III (09-12), Trafic II (06-12), VelSatis (05-10) Vauxhall/Opel: Movano-B (10-12), Vivaro (06-12)

Engine Timing Tool For Renault/ Volvo 2.0 16v 0XAT1702 - Introduction: The timing tool set is for Renault 16v engine. Include camshaft setting tool, tensioning tool for the auxiliary drive belt and crankshaft timing pin for Laguna | Safrane 2.0 | 2.5 16v 1996 - 2001 engines. - Application: Volvo: 1.6/1.8/1.9/2.0/2.3/2.4/2.5 twin cam (belt) petrol engines

Engine Timing Tool Set For Renault, Vauxhall, Volvo 0XAT0601 - Introduction: A comprehensive kit of setting and locking tool designs for Renault, Vauxhall, Volvo, Mitsubishi and Chrysler petrol and diesel engine vehicles. - Application: Model: Renault: Clio (1990-1998), Clio II/Clio Campus/Clio Storia (1998 - 2013), Clio III (2005 - 2013), Clio Symbol/Thalia (2001 2008), Espace/Grand Espace (1996 - 2002), Extra/Rapid/Express (1991 - 2002), Kangoo (1998 - 2009), Laguna (1994 - 2001), Master II (2000 - 2003), Megane (1995 - 2003), Megane/Scenic (1996 - 1999), Modus (2004 - 2008), Modus/Grand Modus II (2008 - 2013), Safrane (1992 - 2001), Scenic (1999 - 2003), Trafic (1997 - 2000), Twingo (2000 - 2007), Twingo II (2007-2013), Wind (2011 - 2013) Vauxhall: Arena (1997 - 2001), Movano-A (1999 - 2006), Vivaro (2001 - 2007), S40 (1996 - 2004), V40 (1996 - 2004) Mitsubishi: Carisma (2001 - 2005), Space Star (2000 - 2006) Chrysler: Cherokee (1984 - 1995), Wrangler (1988 - 1995)

87


Timing Tools - RENAULT RAM Timing Adjustment Set - Renault 0XAT1160 1. With adjustable sprocket for pump timing “RAM” (Reglage Angulaire Micrometrique) System 2. Applicable to Renault 1.9 diesels F9Q 3. Does Mitsubishi and Volvo Mitsubishi Models Carisma (97-02) Engines:F8QT (Renault) Volvo Models: S40 (99-00) V40 (99-00) 4. Engines: 1.9TD D4192T2 (F8Q)

Timing Tool Kit- Renault 1.5, 1.8, 1.9, 2.0 - Belt Drive 0XAT1298 1. Renault 1.5 and 1.9 DCi engines fitted to Laguna, Kangu and Clio models 2. Also Nissan Almera/Kubistar/Micra 1.5 Dci engines 3. Engine code K9K(2002-2010) 4. OEM Codes MOT1489/1054/1430

Petrol Engine Camshaft Sprocket Holding Tool - Renault 1.4, 1.6 - Belt Drive 0XAT1372 1. Renault 1.4 and 1.6 16v petrol engines require sprockets to be free to turn 2. Hold the camshaft sprocket whilst releasing the centre bolts 3. Applications: Renault; Clio (98-06),Laguna (98-07), Megane (98-08),Scenic (98-08)

Cam Belt Tensioning Tool - Renault 0XAT1038 1. ½" square drive Star T50 (replaceable) 2. Specifically for Renault Espace diesel OEM part number MOT 1368

Mounting Bracket- Renault 0XAT1653B 1. Clio III | Scenic/Grand Senic II 1.6 | Laguna II 1.6. 2. Engine Codes: K4M 716/760/761/766/782/800/801/812/813 3. As a new part, can be installed on 0XAT1653A 4. OEM Tool Code: MOT1750.

88


Timing Tools - VAG Diesel Engine Setting/Locking Kit For Vag 2.5 Tdi V6 â&#x20AC;&#x201C; Belt Drive 0XAT1285 - Introduction: Suitable for VAG 2.5 V6 diesel engine was ďŹ rst introduced in 1997. Include front end support guides, crankshaft locking pin, camshaft setting plates, injection pump locking pin, tensioner socket and tensioner locking pin. - Application: Model: Audi: A4 (97-09), A6 (97-05), A6 Allroad (00-05), A8 (97-02) Skoda: Superb (02-08) VW: Passat (98-05)

Engine Timing Tool For Vag 0XAT1262 Introduction: This new kit of twelve tools requires for petrol and diesel engine service, including the timing belt replacement on the recent model and also older 1.9 D model from 1976.

Camshaft Locking Tool For Vag 0XAT1222 - Introduction: This component part uses for locking the camshaft in the place whilst changing the cam belt. It has OEM number T10016 and T10074 allocated. The essential tool is for VAG petrol engine from 1996 onward. - Application: Volkswagen /Audi 1.4 / 1.6L petrol engine Model: Volkswagen: Lupo, Polo, Golf IV, Bora Audi: A2

Diesel Camshaft Setting Plate For Vag 1.9 Sdi/Tdi 0XAT1370 - Introduction: Design to set the camshaft timing without the need to remove the cam cover. Suitable for VAG 1.9 SDi/TDi diesel engine. - Application: Model: Audi: A3(96-03) Seat: Cordoba(99-02), Ibiza(99-02), Leon(99-05), Toledo(99-05) Skoda: Octavia/Octavia Tour(97-05) Volkswagen: Beetle(98-04), Bora (97-05), Caddy/Pick up(98-03) , Fox(05-07), Golf(97-05), Polo(99-06)

89


Timing Tools - VAG Locking Tool Set For VAG/Ford 0XAT1223 - Introduction: For VAG 1.2D, 1.4D & 1.9D TDi PD (Pumpe Duse) engines with the hydraulic belt tensioner. The kit includes crankshaft sprocket locking tool (round gear), plus injection pump locking pin and tensioner locking tool. Crankshaft sprocket Locking Tool is for the round (T10050) at 12 o'clock position. - Application: Model: Audi: A2 (01-06), A3 (01-03), A4 (99-04), A6 (98-05) Ford: Galaxy (99-06) Seat: Alhambra (99-10), Arosa (99-05), Leon (00-05), Toledo (00-05) Skoda: Fabia (00-01), Octavia (00-06), Superb (02-08) Volkswagen: Beetle (00-11), Bora (98-02), Golf (98-12), Lupo (99-05), Passat (98-02), Polo (99-02), Sharan (99-02)

Petrol Setting/locking Kit For VAG 1.2 3 Cylinder (6v/12v) 0XAT1391 - Introduction: The kit contains camshaft locking clamps, camshaft locking pin, and crankshaft locking pin for the timing 1.2 3 cylinder chain drive engine. The engine is found in Seat, Skoda and Volkswagen vehicles. - Application: Model: Seat: Ibiza/Cordoba (02-08) Skoda: Fabia (02-07) Volkswagen: Eos (06-08), Fox (05-08), Polo (02-07)

Engine Timing Locking Tool Set For VW/ AUDI 2.5 TDi V6, AUDI A8 3.3 TDi V8 0XAT1065 Application: VW - Audi 2.5 TDi V6 and Audi A8 3.3 TDi V8 engines. Audi V6 petrol and V6 / V8 diesel engines.

Engine Timing Tool For VW & AUDI 0XAT1535 - Introduction: This new kit of twenty seven tools requires for the petrol and the diesel engine service, including the timing belt replacement on the recent model and also older 1.9D model from 1976. - Application: Model: Audi: A4, A6, A8, Allroad (97-04) Volkswagen: Passat (98-04)

90


Timing Tools - VAG Engine Timing Tool Set For Bmw 0XAT1537 - Introduction: This new kit of twenty eight tools requires for the petrol and the diesel engine service, including the timing belt replacement on the recent model and also older 1.9D model from 1976. - Application: 2 pcs for groove and alu finish locking tools (take out 4 pcs and add 2 pcs, and add 6 pcs more) Model : Audi – Petrol : A2 1.4, A2 1.2L 6v and 12v, A3 1.6, A3 1.8/Turbo, S3 1.8 Turbo, 80 1.3/1.8, 100 1.8 (No Tool Required), 80 1.6/2.0 (No Tool Required), 80 1.6/2.0, Cabriolet/A6 1.8 (No Tool Required), 80/90 2.0/2.2/2.3, 100 1.9/2.0/2.2/2.3, Volkswagen – Petrol : Lupo 1.0 (No Tool Required), Polo 1.0/1.1/ 100/200 2.2 Turbo, 200 2.2/2.3, 80/Coupe 2.0/2.2/2.3, 80/100 1.3/1.4/1.6 (No Tool Required), Polo Classic/Caddy/Golf/Vento 2.0 16v, 80/100/A6 2.0 16v, 80/Coupe/100 2.3, 80/A4/100/A6 1.4/1.6 (No Tool Required), Polo SN 1.2 L 12v, Lupo/Polo Classic/ 2.6/2.8, A8/Cabrio 2.8, A4 1.6, A4 1.6, A4 1.8/Turbo, A6 1.8 Caddy 1.4 16v, Polo/Golf/Bora 1.4/1.6 16v, Polo 1.1/1.3 Turbo, A4 1.8/Turbo, A6 1.8 Turbo, A4 1.8 Turbo, A4 2.0, (No Tool Required), Polo G40 (No Tool Required), Golf/Jetta 1.1/ A6 1.8 Turbo, A4/A6 2.4, A4/A6/A8 2.8, S4 2.7 Turbo, A4/A6/A8 1.3/1.4/1.6 (No Tool Required), Golf/Venta 1.4/1.6 2.8 30v, A6 1.8, TT 1.8 (No Tool Required), Scirocco/Passat/Santana 1.3 Audi – Diesel : A2 1.2 TDi, A2 1.4 TDi, A3 1.9 TDi, A4/A6 1.9 TDi, (No Tool Required), Polo 1.4 16v, Polo Classic/Caddy 1.6/1.8 A3 1.9 TDi, A3/A4/A6 2.0 TDi PD, A3/A4/A6 2.0 TDi PD, 80 1.9 (No Tool Required), Golf/Jetta/Vento/Caddy 1.6/1.8/2.0 TDi, 80 1.9 Turbo D, 100 2.5 TDi, A4/A6 1.9 TDi, A4/A6 1.9 TDi PD (No Tool Required), Scirocco 1.6/1.8 (No Tool Required), Passat A4/A6 1.9 TDi PD, A4 1.9 TDi, A4/A6/A8/Allroad 2.5 V6 TDi 1.8/2.0 (No Tool Required), Corrado 2.0 (No Tool Required), Polo A6 2.5 TDi Classic/Golf/Vento/Passat/ Sharan, Polo Classic/Golf/Bora/Beetle Seat – Petrol : Arosa 1.0/ 1.4 (No Tool Required), Ibiza 1.0/1.4/ 1.6, Golf/Jetta/Caddy/Scirocco 1.5/1.6/1.8 (No Tool Required), 1.6 (No Tool Required), Cordoba 1.0/1.4/1.6 (No Tool Required), Passat/Santana 1.6/1.8 (No Tool Required), Golf/Jetta/Vento/ Inca 1.4/1.6 (No Tool Required), Arosa/Ibiza/Cordoba/Toledo/ Passat/Corrado 1.8/2.0 16v, Scirocco 1.8 16v, Golf/Bora 1.6 FSi, Leon 1.4 16v, Ibiza Malaga 1.2/1.5, Ibiza/Cordoba/1.0/1.3/1.4/ Golf/Bora 1.8 Turbo, Beetle 1.8 Turbo, Golf/Bora 2.0, Bettle 2.0, 1.6 (No Tool Required), Ibiza/Cordoba 1.4 16v, Ibiza/Cordoba Golf/Vento/Passat/Corrado 2.0 16v, Golf Cabrio 2.0, Passat 1.6, 1.6/1.8/2.0, Toledo 1.8/2.0, Alhambra 2.0, Inca 1.6, Ibiza/ Passat 1.6, Passat 1.8, Passat 1.8 Turbo, Passat 2.8 30v, Sharan 1.8 Cordoba/Toledo 1.6, Ibiza/Cordoba/Leon/Toledo 1.6, Alhambra Turbo, Transporter 2.0, Transporter 2.5, Transporter 2.5, LT 2.4 1.8 Turbo, Ibiza/Cordoba 1.8 16v, Toledo 1.8/2.0 16v, Ibiza/ Volkswagen – Diesel :Lupo 3L 1.2 TDi, Lupo/Polo 1.4 TDi, Golf/ Cordoba 1.8 Turbo, Toledo 1.8, Leon 1.8 Turbo, Ibiza/Cordoba Bora/Beetle/Sharan 1.9 TDi, Passat 1.9 TDi, Passat 1.9 TDi, Lupo 2.0 16v, Toledo 1.6/1.8, Alhambra 1.8 Turbo, Alhambra 2.0 /Polo 1.7 SDi, Polo 1.0 SDi, Polo 1.3/1.4D, Polo Classic/Caddy Seat – Diesel : Terra 1.3D/1.4D, Arosa 1.4 TDi, Ibiza/Cordoba 1.7/1.9 SDi, Polo Classic 1.9 TDi, Golf/Vento 1.9 SDi, Polo/Caddy 1.4 TDi PD/1.9, TDi PD, Arosa 1.7 SDi, Ibiza/Malaga 1.7 D, Pick-up 1.9D, Polo Classic/Caddy 1.9 SD, Polo/Caddy/Beetle 1.9 Ibiza/Cordoba 1.7 SDi, Ibiza/Cordoba/Toledo 1.9 D/TD, Ibiza/ TDi, Polo Classic/Golf/Bora 1.9 SDi/TDi, Golf/Jetta/Caddy 1.5/1.6D Cordoba 1.9 SD/TDi, Toledo/Alhambra 1.9 TDi, Inca 1.9 SDi, Turbo, Golf/Vento 1.9 D/TD/TDi, Passat/Santana D Turbo, Inca 1.9 SDi, Ibiza/Cordoba/Toledo 1.9 D/TD, Ibiza/Cordoba/ Transpoter 1.6D/1.7D/1.9D Turbo, Golf/Vento 1.9 TD/TDi, Golf/ Toledo 1.9 D/TD, Inca 1.9 D, Ibiza/Cordoba/Leon 1.9 SDi/TDi, Cabrio 1.9 TDi, Passat 1.9 TD/TDi, Golf/Vento 1.9 D/TD, Passat 1.9 Toledo 1.9 TDi, Alhambra/Leon/Toledo 1.9 TDi PD TD, Transpoter 1.9 TD, Golf 2.0 TDi PD, Passat/Sharan 1.9 TDi, Skoda – Petrol : Fabia 1.4, Fabia 1.2 L 12v, Felicia/Octavia 1.6 Passat 1.9 TDi, Passat 1.9 TDi PD, Passat 1.9 TDi PD, Passat 2.0 TDi (No Tool Required), Octavia 1.6, Octavia 1.8/Turbo, Octavia 1.8 PD, Golf/Passat 2.0 TDi PD, Passat 2.5 V6 TDi, Transpoter 2.4D, Turbo 20v RS, Octavia 2.0 Transpoter 2.4D, Transpoter 2.5 TDi, LT 2.4D Turbo D, Skoda – Diesel : Felicia/Felicia Pick-up/Cube Van 1.9 D, LT 2.5 SDi/TDi Octavia 1.9 SDi, Fabia/Octavia 1.9 TDi PD, Octavia 1.9 TDi

Petrol Engine Setting/Locking Kit For VAG 1.4, 1.6 Fsi – Chain Drive 0XAT1538 Application: Volkswagen Audi Group (VAG) 1.4 and 1.6 FSi petrol engines with twin camshaft chain drive fit in: Model: Audi: A3 (03-07) Skoda: Octavia (04-09) VW: Polo(02-08), Golf (03-09), Golf Plus (05-09), Jetta (06-09), Passat (05-09), Touran (03-09)

91


Timing Tools - VAG Engine Timing Tool For VAG 2.0L TDi PD DOHC 0XAT1068 - Introduction: The timing tool set is for VAG 2.0 Liter TDi PD DOHC engine fitted to Audi A4/A6, Skoda Octavia II and Volkswagen Golf, Golf Plus, Jetta, Passat and Touran models, and it is also found on Ford Galaxy model with ASZ and ASZ1 VAG engines. The set includes Crankshaft Setting Tool for the round (T10050) sprocket at 12 o’clock position and the oval sprocket (T10100) at 1 o’clock position. - Application: Model: Audi: A4, A6 Skoda: Octavia II Volkswagen: Golf | Golf Plus, Jetta, Passat, Touran

Reaction Wrench (420mm Long, Adjustable) 0XAT1501 - Introduction: A selection of tip-Ø and hole interval are available to make the wrench universal in the range of application, and with inter-changeable tip and several hole interval. - Application: Suitable for the timing pulley with holes in the minimum Ø12mm, e.g. VW/Audi, Ford, Opel, Peugeot, Renault, Citroen, Rover, Volvo, Japanese vehicles, etc. To prevent the pulley on the camshaft and the injection pump, and to form rotating when loosening the central fastening bolt.

Timing Belt Double For Pin Wrench 0XAT1122 - Introduction: Use to adjust the belt tensioner on 1999 and later VW Golf, Jetta, Passat, and VW Beetle 1999 - 2003 with 2.0L petrol engine and 1.9L TDi diesel engine. - Application: The special wrench is for adjusting the belt tensioner on the following: Model: Audi: A6 1.6 (96 and newer) ALZ Volkswagen: Polo Classic, Golf, Bora, New Beetle 1.6 (97- ) AEH / AKL / APF / AUR /AVU / AYD Golf, Bora, New Beetle, 2.0 (98 -) AQY / APK

Timing Locking Tool Set For VAG 0XAT1542 - Introduction: The engine timing tool is for Volkswagen/Audi with the chain drive engine. - Application: The timing tool is for Audi / Volkswagen / Seat / Skoda 1.6/1.8/2.0L with the chain drive engine. Audi: A3 1.6 FSi (03-07)

92


Timing Tools - VAG 3 Pcs Timing Belt Double Pin Wrench Tool Set For VAG 0XAT1090 - Introduction: The belt tensioner roller has two holes which the two pins of the double pin Matra V.159, VAG 3387, T10020 are inserted to turn the belt tensioner roller and tension the timing belt. - Application: Model: Diesel Audi: 80, 100, A3, A4, A6 1.9 Turbo D, 1.9TDi, 2.5TDi, A3, A4, A6 2.0TDi, A2, A3, A4, A6, 1.2TDi, 1.4TDi, 1.9TDi (99 on) Ford: Galaxy 1.9TD Seat: Ibiza/Cordoba, Toledo, Leon, Alhambra, Inca 1.7SDi, 1.9D/TD/SDi/TDi Skoda: Felicia, Octavia 1.9 D/TDi Volkswagen: Polo, Polo Classic, Golf, Jetta, Vento, Bora, Beetle, Passat, Sharan, Caddy and Transporter 1.5D, 1.6D / Turbo, 1.7D/SDi, 1.9SDi/TDi, Golf Passat 2.0TDi Petrol Audi: 80,100, A3, A4, A6 1.6, 1.8 / Turbo, 2.0, 2.0 16v, A3, A4 1.6 (96 on) Seat: Ibiza/Cordoba, Toledo, Alhambra, Inca 1.6, 1.8, 1.8 16v, 2.0, 2.0 16v, Ibiza/Cordoba, Leon, Toledo 1.6 (99 on), Alhambra 2.0 (00 on) Skoda: Octavia 1.6 (97 on), 2.0 (99 on) Volkswagen: Classic Polo, Scirocco, Corrado, Golf, Jetta, Vento, Passat, Sharan, Transporter 1.6, 1.8 / Turbo, 1.8 16v, 2.0, 2.0 16v, Golf, Bora, Polo Classic, Beetle 1.6 (97 on), 2.0 (99 on)

Diesel Timing Kit For Audi/Seat/Volvo/ Skoda/ Volkswagen Engine 0XAT1656 - Introduction: Diesel Timing Kit is a set of the essential tool for setting and locking the camshaft and the crankshaft when changing the timing belt on Audi, Seat, Volvo and Volkswagen diesel engines. The kit forms a part of the engine timing & locking, the comprehensive diesel engine, and the fuel pump timing & locking. - Application: Model: Diesel Audi : 80(1.9 TDi), 100(2.5 TDi), A4 | A6(1.9 TDi) Ford : Galaxy (1.9 TDi) Seat : Ibiza Cordoba(1.7 SDi, 1.9 D | TD), Toledo(1.9 T | TD, 1.9 D | TD, 1.9 TDi), Alhambra(1.9 SDi | TDi), Inca Skoda : Felicia-Pick Up | Cube Van (1.9D) Volkswagen : Lupo | Polo (1.7 SDi |1.7 | 1.9 SDi), Polo (1.3 | 1.4D), Polo Classic Golf | Vento(1.7 | 1.9 SDi), Caddy(1.9TDi), Polo | Caddy Pick Up (1.9D), Polo | Classic Caddy (1.9 SD), Golf | Jetta Caddy(1.5 | 1.6, D | T), Golf Vento (1.9 D | TD, 1.9 TDi), Lupo(1.7 SDi), Passat Santana (D | Turbo), Transporter(1.6 | 1.7D, 1.9D | TD), Golf | Vento Cabrio (1.9 TD | TDi), Passat(1.9 TDi | TD), Golf Vento, Passat(1.9D/TD), Transporter, Passat Sharan(1.9 TDi), Transporter(2.4D, 2.5 TDi), LT(2.4D | TD) Volvo : 240D | 740 |760 | 940 |960 TD| 940 TD

93


Timing Tools - VAG Support Guide Set For VAG 0XAT1657 - Introduction: Access the tight in the engine bay, Volkswagen Audi Group designs the front end of certain vehicle to slide forward giving more room for the cam belt and the engine timing service. The tool uses through the front panel to slide forward and hold in the service position. - Application: Three sizes are available 17mm x 2(OEM:3369). The set is the popular on many engines. 8mm x 2 (OEM:3411). The set is the popular on Passat 1.9 TDi PD and 1.6/2.0, and Sharan 1.9 TDi PD. 10mm x 2 recently introduced on some of the later model. Model: Audi: A4, A5, A6, A8 VW: Passat

Diesel/Petrol Engine Setting/Locking Master Kit For VAG â&#x20AC;&#x201C; Belt And Chain Drive 0XAT1144 - Introduction: The comprehensive setting/locking combination kit is for 1.2, 1.4, 1.6, 1.7, 1.8, 1.9, 2.0, 2.5 diesel and petrol engines ďŹ tted to Audi, Seat, Skoda and VW vehicles. Include service position, support guides, requires for the application on some VAG vehicles. - Application: Model: Audi: 80 (91-96), A2 (00-06), A3 (96-12), A4 (94-09), A6 (94-05), A6 Allroad (00-05), A8 (97-02), S3 (99-03), TT (98-06) Seat: Alhambra (96-10), Altea/Altea XL (04-12), Arosa (98-05), Cordoba (93-09), Exeo (09-10), Ibiza (93-15), Inca (95-04),Leon (99-13), Toledo (94-09) Skoda: Fabia (99-07), Fabia II (07-12), Octavia/Octavia Tour (96-10), Octavia II (04-12), Roomster (06-12), Superb (02-08) Volkswagen: Beetle (98-11), Bora (97-05), Caddy/Pick Up (95-14), Fox (05-12), Golf (93-12), Golf Plus (05-12), Jetta (05-11), Lupo (98-05), Passsat (96-10), Polo (98-12), Sharan (95-10), Touran (03-10), Transpoter (90-13), Vento (94-98) Ford: Galaxy (95-06)

Engine Timing Tool Set For Volkswagen 2.4/2.5 Tdi 0XAT1138 - Introduction: The set of the engine timing locking tool is for using on Volkswagen Transporter 2.4D (95-03) with engine code AAB, AJA (02/95-03). - Application: Volkswagen Diesel, Transporter 2.4D(AAB | AJA), Transporter 2.5 Tdi (ACV | AHY | AJT | AUF | AXG | AXL | AYC)

94


Timing Tools - VAG Petrol Engine For VAG 1.8/1.8T, 2.0 FSi/ TFSi/TSi, 2.0 S/R Belt Replacement Chain In Head Service Kit 0XAT1084 - Introduction: Suitable for the belt tensioning huge range of VAG 1.8/1.8T, 2.0 FSi/TFSi twin camshaft engines. The belt drive engine has a chain in head to connect two camshafts. The kit includes the tool for servicing the chain in head and establishing the correct valve/camshaft timing. - Application: Model: Audi: A3 (96-09), A4 (94-08), A6 (95-11), S3 (99-08), TT (98-12) Seat: Alhambra (97-10), Altea/Altea XL (06-09), Cordoba (99-02), Exeo (09-10), Ibiza (99-02), Leon (99-12), Toledo (99-09) Skoda: Octavia/Octavia Tour (98-10), Octavia II (04-09) Volkswagen: Beetle (99-11), Bora (97-04), Eos (06-10), Golf (9712), Golf Plus (05-09), Jetta (05-09), Passat (96-10), Scirroco (0912), Sharan (97-10), Touran (03-09)

Diesel Engine Setting/ Locking Tool Set 0XAT0403 - Introduction: This timing set is for 2.4D and 2.5 SDi/TDi diesel covered engines with â&#x20AC;&#x2DC;distributor typeâ&#x20AC;&#x2122; fuel injection pump and common rail system, and contain the tool required to lock the engine in the timed position for the application such as the timing belt replacement. 0XAT0403 set contains crankshaft pulley holding tool, tensioner adjuster, crankshaft locking pin (common rail variant), and camshaft setting plate as appropriate to each type/ group of engine. All the tools contain in the set is available as the individual tool. - Application: VAG 2.4D, 2.5 SDi/TDi diesel engines (belt) in Volkswagen: Transporter, LT, Crafter

Timing Tool Kit For AUDI A4/A6/A8 2.4/3.2 Fsi Chain Engine 0XAT1420 - Introduction: The special design set of tool is for alignment camshaft locking and adjusting. - Application: Audi A4/ A6/ A8 3.2 FSi with engine code AUK, A6L/ Quattro 2.4 with engine code BDW

Petrol Engine Camshaft Setting Plate 0XAT1233 Applications on VAG 2.3, 2.8 and 2.9 chain drive engines in VW, Seat & Ford models 0XAT1233A - Metal sheet with nickel plated 0XAT1233B - Plastic

95


Timing Tools - VAG Diesel Engine Setting/Locking Kit For VAG 2.4/2.5D SDi/TDi/TDi CR – Belt Drive 0XAT1138L - Introduction: The special kit is for the timing belt replacement on VAG van with 2.4D/2.5 TDi diesel engine. The kit including the latest common rail engine. The kit includes crankshaft pulley holding tool, camshaft setting plate, injection pump and crankshaft locking pins and tensioner adjuster. - Application: Volkswagen: Crafter (06-12), LT (96-06), Transporter (90-03)

Petrol Engine Setting/Locking Kit For VAG 1.2, 1.4 TFSi & 1.4,1.6 FSi – Chain Drive 0XAT1538A - Introduction: The timing kit is suitable for 1.2/1.4 TFSi and 1.4/1.6 FSi engines. The kit contains the essential tool for TDC position tool, camshaft setting plate and tensioner locking pin. - Application: Model: Audi: A1 (10 - 12), A3 (03 - 12) Seat: Altea/Altea XL (08 - 12), Cordoba/Ibiza (08 - 12), Leon (07 - 12), Toledo (07 - 09) Skoda: Fabia II (07 - 12), Octavia II (04 - 12), Roomster (06 - 12), Superb II (09 - 12), Yeti (09 - 12) VW: Caddy (10 - 12), Caddy Maxi (10 - 12), Eos(06 - 12), Golf (03 - 12), Golf Plus (03 - 12), Jetta (06 - 2), Passat (05 - 11), Polo (02 - 12), Scirocco (08 - 12), Tiguan (07 - 12), Touran (03 - 12)

Diesel Engine Setting / Locking Kit For VAG Pump Duse Engine – Belt Drive 0XAT1123 Application: Model: Audi: A1 (10-12), A2 (01-06), A3 (01-12), A4/Allroad (99-12), A5(08-12), A6/Allroad (98-11), TT (08-10), Q5 (08-12) Dodge: Caliber (06-11) Ford: Galaxy (99-06) Mitsubishi: Grandis (05-10), Lancer (05-10), Outlander (07-10) Seat: Alhambra (99-10), Altea (04-12), Altea XL (04-12), Arosa (99-05), Cordoba (02-09), Ibiza (02-10), Leon (00-12), Toledo (04-11) Skoda: Fabia (00-07), Fabia II (07-12), Octavia (00-10), Octavia II (04-12), Roomster (07-12), Superb (02-08), Superb II (08-12), Yeti (09-12) Volkswagen: Amarok (10-12), Beetle (00-11), Bora (98-08), Caddy/ Maxi (03-12), Eos (06-10), Fox (05-11), Golf (98-12), Golf Plus(05-12), Jetta(05-11), Lupo(99-05), Passat/CC (98-12), Polo(99-12), Scirocco (08-12), Sharan (99-10), Tiguan (07-12), Touran (03-12), Transporter (03-12)

96


Timing Tools - VAG Timing Tool Kit For VAG 1.6 /2.0 TDi CR 0XAT1760 - Introduction: This kit designs to fit the newest common rail diesel engine which is significantly different from the older PD engine. The CR engine combines the belt and the gear drive by using a toothed belt to transfer the drive from the crankshaft to one of the cam shafts, use the gear to transfer the drive from one cam to the other. - Application: Model: Audi : A3 | A4 | A6 | Q5 Seat : Exeo Volkswagen : Golf / Golf Plus, Tiguan, Passat, Eos

Engine Locking Kit For Volkswagen/ Audi 2.7/3.0 0XAT1621 - Introduction: This kit specifically designs to suit the popular 2.7/3.0 TDi and TDi CR (Common Rail) chain drive diesel engines found in VAG range. - Application: This kit includes the special adaptor for turning and aligning the crankshaft with the cylinder head. Specifically design is for servicing V6, 4 valves, the common rail diesel engine, and the chain drive engine. Model: Audi: A4 2.7 TDi with engine code BPP (05-09); A4 Quattro 2.0 TDi with engine code BMZ(05-06) Q7 3.0 TDi with engine code BUG, BUN(06-09) Volkswagen: Touareg 3.0 V6 (08-); Phaeton 3.0 V6 TDi (06-)

Diesel Engine Setting/Locking & Hp Pump Removal/Installation Kit For VAG 2.7/3.0 TDi V6 & 4.0/4.2 TDi V8 0XAT1622 - Introduction: This range of the quad cam engine has 4 chains, 4 tensioners, linking the oil pump, the crankshaft, the camshaft and the balance shaft together. The chain system is located at the rear of the engine (gearbox end). The high pressure diesel pump is driven by using a toothed belt from one of the camshafts. - Application: VAG 2.7/3.0 TDi V6 and 4.0/4.2 TDi V8 chain drive diesel engines. Model: Audi: A4, A5, A6, A6 Allroad, A8, Q5, Q7 Volkswagen: Phaeton,Touareg

Camshaft Locking Tool - VW 1.9 Tdi. 0XAT1238 1. For VW’s 2. Alignment with 2 ground shoulder screws 3. Knob/handle is incorporated in the tool with precision alignment 4. Used on 1.9 TDI engines 5. Use on Seat Cordoba/Ibiza/Inca/Leon/Toledo (1999-2006)

97


Timing Tools - VAG Camshaft Locking Tool For Porsche/ Vw – V6 3.2l/W12 6.0 0XAT1840 - Introduction: To block the camshaft with respected to upper dead point (U.D.P.) of cylinder number 1. Place the distributor point placement adjustment tool in the groove that the camshaft has at the end. - Application: Use to set the camshaft position relative to TDC when reassembling the cylinder head application. Model: VW: Golf, Jetta, GTI, Passat 2002-2005, Golf 1998, Bora 1999, Passat 1997, Sharan 1996, Touareg 2003, Phaeton 2003, Transporter 1991 Audi: A8 1994, TT 1999

Camshaft CMP Setting Tool For AUDI V8 4.2L 0XAT1841 - Introduction: This tool set includes: Two camshaft alignment fixtures secure and maintain the TDC timing alignment that the cam belt is serviced or removed for other front engine or the cylinder head service task. - Application: Audi A4 2001, Audi A6 1998, 8-cyl. engine For locking the camshaft when checking the valve timing 4.2L 40 valves (5 valves per cylinder) V8 engine (engine code: BAS, BBD, BHF, BNK, BFM, BGK) Audi: B6 S4, B7 S4, A6, A8

Camshaft Timing Cmp Setting Tool For AUDI V8 4.2L 0XAT1841A - Introduction: This tool set includes: Two camshaft alignment fixtures secure and maintain the proper alignment of the hall effect sensor rotor which are mounted to the intake camshaft. - Application: Audi A4 2001, Audi A6 1998, 8 cyl. engine For installing the hall sender screen 4.2L 40 valves (5 valves per cylinder) V8 engine (engine code: BAS, BBD, BHF, BNK, BFM, BGK) Audi: B6 S4, B7 S4, A6, A8

Timing Tensioner & ValveTiming Tools - VAG 1.8/T 0XAT1459 1. Covering huge range of VAG 1.8 & 1.8T “Chain in Head" engines 2. Fitted in numerous Audi, Seat,Skoda and VW models 3. Covers timing belt automatic tensioner and valve timing - camshaft rear sprockets/chain. 4. Applications: Audi: A3, S3, A4,A6, TT, Seat: Ibiza, Cordoba,Leon, Toledo, Alhambra, Skoda: Octavia, VW: Beetle, Bora, Golf, Passat

98


Timing Tools - VAG Timing Tool Kit For AUDI A4/A6/A8 2.4/3.2 FSi Chain Engine 0XAT1835 - Introduction: A timing tool kit is for the latest Audi with FSi chain drive engine. - Application: Contain the important tool, e.g. for following work on Audi with 2.4L/3.2L FSi V6, V8, V10 petrol engines. -For locking the cam and the crankshaft -For fixing the chain tensioning unit -For replacing the timing chain -For adjusting the timing during the engine repair Suitable for: -Audi A4, A6 model series B7 and C6

Diesel/Petrol Camshaft Sprocket Remover - VAG 0XAT1297 1. Remove camshaft sprockets with 5 and 6 spokes from Audi, Skoda and VW vehicles 2. Features ball end thrust screw to reduce damage to camshaft bolt 3. Applications: Diesel: Skoda: Octavia 1.9 SDi (97-05), Octavia 1.9TDi (96-06), VW: Beetle 1.9 TDi (97-05), Beetle 1.9 TDi(97-05), Bora 1.9 SDi/TDi (97-05),Caddy 1.9 SDi/TDi (97-05), Golf 1.9 SDi/TDi (97-05), Passat 2.5 V6 TDi (98-05), Polo 1.9 SDi/Tdi (97-05) Petrol: Audi: A4 2.4, 2.8 V697-06), RS4 2.7 V6 Turbo(97-06), S4 2.7 V6 Turbo(97-06), A6 2.4, 2.7, 2.8 V6(97-06), A6 4.2 V8 (99-05),S6 4.2 V8 (99-05), A8 2.8 V6(97-06), Allroad 2.7 V6 Turbo (97-06)

Diesel Engine Setting/Locking Kit For VOLKSWAGEN 2.5 TDi – Pumpe Duse – Gear Drive 0XAT1467 - Introduction: Suitable for the timing gear drive engine which the camshaft, the crankshaft and the auxiliary shaft use by a series of the inter-meshed cogs. - Application: VAG 2.5 TDi Pumpe Duse diesel engine (gear) in: Volkswagen: Transport (03-08), Touareg (03-08), Multivan (04-08) AXD, AXE, BAC, BLJ, BLK, BNZ, BPC, BPD and BPE engines.

Engine Timing Tool Set For AUDI (TFSi) 0XAT1420A - Introduction: The special design set of tool is for alignment camshaft locking and adjusting - Application: Audi: Q5 2.0, A6L 2.8, 3.0T

99


Timing Tools - VAG Engine Adjustment Tool Set 0XAT1913 - Introduction: Contain one camshaft setting tool device and one crankshaft locking pin ďŹ xed the mandrel. For adjusting the timing, e.g. during replacement of the timing chain or during the engine repair. - Application: For 1.2 TFSi engine from 0.8 with the timing chain from VAG engine

VW/AUDI 2.0L Turbo Timing Set 0XAT1915 - Introduction: The kit consists of 6 main components which includes the tool recommended by the manufacturer to set No.1 cylinder at TDC. It is important that the correct process is followed when setting up the engine. - Application: VW/Audi 2.0L Turbo Timing Set is applicable to VW and Audi vehicles with a 2.0L (turbo) engine T10355: Use for counter - holding the vibration damper when loosening or tightening the center bolt of the crankshaft T10368: Use removing and installing the lower timing chain cover T40196: Use for sliding pieces on the camshaft on 2.0L 4v turbo engine T40267: Locking clip for the chain tensioner T40271: Use to lock the camshaft sprocket in TDC position when installing the timing chain T10352: Use for removal and installation of 7/3 way the central valve for the camshaft adjustment. Comparable to factory tool number T10352 and T10352/1.

Engine Timing Tool For VAG 1.8/2.0 4v TFSi Chain Engine 0XAT1924 - Introduction: The kit consists of 8 main components which includes the tool recommended by the manufacturer to set No.1 cylinder at TDC. It is important that the correct process is followed when setting up the engine. - Application: Model: Audi : A4 (1.8), A4 Quattro (1.8, 2.0), A5 Coupe/Cabriolet (1.8, 2.0), A5 Sportback (1.8, 2.0), A6 (2.0), Q3 (2.0), Q5 (2.0), TT (1.8, 2.0) Seat : Alhambra (2.0), Altea/Altea XL (1.8, 2.0), Exeo (1.8, 2.0), Leon (1.8, 2.0), Toledo (1.8, 2.0) Skoda : Octavia II (1.8, 2.0), Superb II (1.8, 2.0), Yeti (1.8) Volkswagen : Eos (2.0), Golf VI (1.8, 2.0), Golf VI Estate(2.0), Passat (1.8, 2.0),Passat CC (1.8), Sharan (2.0), Beetle (2.0), CC (1.8, 2.0), Passat Alltrack (1.8, 2.0), Scirocco (2.0), Tiguan (2.0)

100


Timing Tools - VAG Petrol Engine Setting/Locking Kit For VAG 1.2/1.4 TFSi, 1.4/1.6 FSi – Chain Drive 0XAT1538B - Introduction: The timing kit is suitable for 1.2/1.4 TFSi and 1.4/1.6 FSi engines, it contains the essential tool for TDC positioning tool, camshaft setting plate and tensioner locking pin. - Application: Model: Volkswagen: Polo / Golf / Golf Estate / Golf Plus / Jetta / Passat / Eos / Tiguan and Touran Audi: A3 1.6 Skoda: Fabia II 1.6 / Octavia II and Roomster

Lock Camshaft Sprocket For VW 0XAT0002 - Introduction: Use of the instrument for Volkswangen: Fix the gear inlet/ exhaust camshaft when loosening the central screw. - Application: Lock Camshaft Gear: 1.8 TSFi/2.0 TFSi Modification Engine: CABD, CAEA, CDNB, CDNA, CAWA, CBFA, CCTA, CCZA, CAEB, CDNC, CDHA, CABA, BYT, BZB, CDAA, CABB, CDHB

Engine Timing Tool For VW/AUDI 0XAT1925 - Introduction: Use for location of the sliding pieces on the camshaft. - Application: 4 cylinder petrol direct injection, 2.0 liter turbo 4v engine. For example: Audi A4 2008>, Audi Q5 2009> Repair Group 15

Engine Timing Tool For VW/SKODA/SEAT 0XAT0007 - Introduction: This 1.0 MPi 3 cylinder engine was introduced in Volkswagen up 2011, Seat Mii 2012, and Skoda Citigo. It is a 3 cylinder twin camshaft unit, equips with variable valve timing (VVT) on the tri-lobed inlet camshaft sprocket with a conventional timing belt drive system. Lock the camshaft when checking and adjusting the timing. The special tool for simple insertion of the camshaft fits when checking the valve timing. - Application: For checking and adjusting the motor control period, 1.0 (3 cylinder) petrol engine in: Model: Seat: Mii from Bj. 2011 Skoda: Citigo Volkswagen: Up!

101


Timing Tools - VAG Engine Timing Tool For VAG 1.8/2.0 4v TFSi Chain Engine & 2.0l Turbo Timing Set 0XAT0009 - Introduction: The kit consists of 11 main components which includes the tool recommended by the manufacturer to set No.1 cylinder at TDC. It is important that the correct process is followed when setting up the engine. - Application: 2.0L turbo timing set is applicable to VAG vehicle with a 2.0L (turbo) engine T10355: Use for counter-holding the vibration damper when loosening or tightening the center bolt of the crankshaft T10368: Use removing and installing the lower timing chain cover T40196: Use for the sliding pieces on the camshaft on 2.0L 4v turbo engine Model: Audi : A4 (1.8), A4 Quattro (1.8, 2.0), A5 Coupe/Cabriolet (1.8,2.0), A5 Sportback (1.8,2.0), A6 (2.0), Q3 (2.0), Q5 (2.0), TT (1.8,2.0) Seat : Alhambra (2.0), Altea/Altea XL (1.8,2.0), Exeo (1.8,2.0), Leon (1.8, 2.0), Toledo (1.8, 2.0) Skoda : Octavia II (1.8, 2.0), Superb II (1.8, 2.0), Yeti (1.8) Volkswagen : Eos (2.0), Golf VI (1.8,2.0), Golf VI Estate (2.0), Passat (1.8, 2.0), Passat CC (1.8), Sharan (2.0), Beetle (2.0), CC (1.8, 2.0), Passat Alltrack (1.8, 2.0), Scirocco (2.0), Tiguan (2.0)

Engine Timing Tool For VAG 1.8/2.0 4v TFSi Chain Engine & 2.0l Turbo Timing Set 0XAT4369 - Introduction: VAG TFSi (post 2007) vehicle requires a set of the special tool when renewing or replacing the timing chain. This speciďŹ cally designs the tensioner lever for later generation III 1.8 & 2.0 4v TFSi 4 cylinder engines. This one piece lever uses to push back the timing chain tensioner without removing the front engine cover. - Application: Model: Audi: A3/A3 Cabrio/TT/Q3 Seat: Alhambra/Altea/Exeo/Leon/Toledo Skoda: Octavia II/Superb III/Yeti Volkswagen: Eos/Golf VI/Passat CC & Alltrack/ Sharan/Beetle/CC/ Scirocco/Tiguan

VW/AUDI 7 Speed Dsg Clutch Installer & Remover 0XAT8707 - Introduction: The special design installs and removes the clutch of gearbox. - Application: Model: VW: Golf 2004 > Golf Plus 2005 > Audi: A3 2004 > with 7 speed gearbox (code 0 AM), Touareg 2003> with 6 speed gearbox (code 08 D)

102


Timing Tools - VAG Engine Timing Tool For VAG 0XAT0004 - Introduction: Use for correcting the camshaft and the crankshaft timing position. 4 cylinder EA888 petrol: 1.8 R4 16v TSi/TFSi, 2.0 R4 16v TSi/TFSi - Application: 2006 – 2013 VAG series TSi, TFSi EA888 engines (1.8 L, 2.0 L) Model : Audi : A4 (1.8), A4 Quattro (1.8,2.0), A5 Coupe/Cabriolet (1.8, 2.0), A5 Sportback (1.8, 2.0), A6 (2.0), Q3 (2.0), Q5 (2.0), TT (1.8, 2.0) Seat : Alhambra (2.0), Altea/Altea XL (1.8, 2.0), Exeo (1.8, 2.0), Leon (1.8, 2.0), Toledo (1.8, 2.0) Skoda : Octavia II (1.8, 2.0), Superb II (1.8, 2.0), Yeti (1.8) Volkswagen : Eos (2.0), Golf VI (1.8, 2.0), Golf VI Estate (2.0), Passat (1.8, 2.0), Passat CC (1.8), Sharan (2.0), Beetle (2.0), CC (1.8), Passat Alltrack (1.8, 2.0), Scirocco (2.0), Tiguan (2.0)

Diesel Camshaft/Head Rebuild Kit For VAG/PORSCHE 0XAT0005 - Introduction: The essential cylinder head rebuild kit is for VAG and Porsche CR diesel engines. Equivalent to the OEM tool requires the camshaft correctly fitted into the cylinder head. The cylinder head on the engine designs with a camshaft retaining frame which splits from the cylinder head along the center line of the cam bearing cap. - Application: TSi/TDi CR/BiTDi CR/TDiE CR/Blue Motion/Green Line Model : Skoda : Fabia II(542/545 (07-)), Octavia II(1Z3/1Z5(04-13)), Praktik(5J7,) Rapid(NH3), Rapid Spaceback(NH1), Roomster(5J7), Superb II(3T4/3T5(08-)), Yeti(5L7). Porsche : Cayenne (92A), Panamera (970), Cayenne (9PA/948) Audi : A5 Coupe/Cabriolet (8F7/8T3), A5 Sportback (8TA), A6 (4F2/4F5(05-11)), A6 (4G2/4G5(11-)), Q3 (8UB), Q5 (8RB), TT (8J3/8J9(06-)), A1 (8XA/8X1), A3 (8PA/8P1(03-13)), A3 Cabrio (8P7), A4 (8K2/8K5(07-)), A4 Allroad (8KH), A4 Quattro (8K2/8K5(07-)), A8 (4E2/4E8(03-10)), A8 (4H2/4H8(10-)), Q7 (4LB), A6 (4F2/4F5(05-11)), A6 Allroad (4FH(06-11)), A6 Quattro (4F2/4F5 (05-11)), A8 (4E2/4E8(03-10)), A4 (8Ex (01-08)), A4 Cabrio (8HE/8H7), A4 Quattro (8Ex(01-08)), A4 Quattro (8K2/8K5(07-)), A6 Allroad (4GH(12-)), A6 Quattro (4G2/4G5(11-)), A7 (4GA), A8 (4H2/4H8(10-)), SQ5 (8RB) Volkswagen : Golf Plus (521(09-)), Golf VI (5K1(08-13)), Golf VI Estate (AJ5(09-13)), Jetta (162(11-)), Jetta (1K2(05-11)), Passat (362/365(11-)), Passat (3C2/3C5(05-11)), Polo (6R1(09-)), Touran (1T1/1T2/1T3), Amarok (2Hx), Caddy/Caddy Maxi (2Kx/2Cx(04-)), Crafter (2Ex/2Fx), Transporter T5 (7H/7J/7E/7F (04-)), Beetle/Maggiolino (5C1/5C7(11-)), CC (358), Eos (1F7/1F8), Golf V Estate (1K5(07-09)), Golf VI Cabrio (517(11-)), Jetta (162(11-)), Jetta (1K2(05-11)), Passat Alltrack (365), Passat CC (357), Scirocco (137(08-)), Sharan (7N1(10-)), Tiguan (5N1/5N2), Phaeton (3Dx), Touareg (7LA/7L6(03-10)), Touareg (7P5) Seat : Altea/Altea XL (5P1/5P5/5P8), Exeo (3R2/3R5), Leon (1P1(05-13)), Toledo (5P2(04-09)), Ibiza (6J1/6J5/6J8(08-)), Alhambra (710(10-))

103


Timing Tools - VAG Petrol Engine Setting/Locking Tool Kit 1.8/2.0 TFSi ENGINE FOR AUDI/SEAT/ SKODA/VW 0XAT0014 - Introduction: The set of 3 assembly camshaft tools. For installation and removal 4/3 way the central valve for the camshaft adjustment. This set includes the original tool T10352 and the new version T10352/1 and T10352/2. The set of 3 sockets, 3/8" drive, and outside diameter 34 mm. - Application: 1.8 & 2.0 TFSi petrol engines in: Model: Audi: A3, A4, A5, A6, Q3, Q5, TT Seat: Leon, Toledo, Altea, Altea XL, Exeo, Alhambra Skoda: Yeti, Octavia II, Octavia III, Superb Volkswagen: Golf, Beetle, Jetta, Scirocco, Eos, Passat, Passat CC, Tiguan, Sharan, Amorok

VAG Year 2012 Adaptable To 1.6 â&#x20AC;&#x201C; 2.0 CR TDi Engine Timing Kit 0XAT0029 Introduction: An 8 piece kit consists of the component which requires to lock the crankshaft, the cam pulley and the fuel pump pulley in the timed position to removal and the replacement of the camshaft timing belt. Item A B C D E F G

Description Belt Tensioner Adjustment Tool Auxiliary Drive Belt Tensioner Locking Pin Camshaft Pinion Locking Tool Camshaft Pulley Locking Tool Crankshaft Pulley Timing Tool Belt Tensioner Pulley Locking Tool Camshaft Timing Tool

OEM T10265 T10060A 3359 T10051 T10490 T10264

Ignition Coil Puller Tool For VAG 0XAT0024 - Introduction: A special tool is for pulling the ignition that coils oďŹ&#x20AC; the latest generation VAG petrol engine. Use for removing the pencil type ignition coil on 4 cylinder direct injection generation lll VAG petrol engine OEM Number: T10530 - Application: Volkswagen Golf 2013 >, Audi A3 2013 >, Leon 2013 >, Octavia 2013 > 4-cyl. injection engine (1.2l direct injection engine, turbocharger) 4-cyl. injection engine (1.4l engine direct injection engine, turbocharger) 4-cyl. direct injection (2.0l engine, 4V, turbocharger, chain drive, Generation III) Removing pencil-type ignition coil

104


Timing Tools - VAG Engine Timing Tool For VW/SKODA/SEAT 0XAT0025 - Introduction: This 1.0 MPi 3 cylinder engine was introduced in Volkswagen up 2011, Seat Mii 2012, and Skoda Citigo. It is a 3 cylinder twin camshaft unit, equip with variable valve timing (VVT) on the tri-lobed inlet camshaft sprocket with a conventional timing belt drive system. Lock the camshaft when checking and adjusting the timing. The special tool for simple insertion of the camshaft ďŹ ts when checking the valve timing. - Application: For checking and adjusting the motor control period, 1.0 (3 cylinder) series petrol engine in: Type / Model: Audi A3 2013 >, Golf 2013 >, Octavia 2013 >, Leon 2013 > Assembly Group: 4 cylinder injection engine (1.4 L direct injection engine, turbo charger) 4 cylinder injection engine (1.2 L direct injection engine, turbo charger) For example: Audi: A3 2013 > 4 cylinder 1.4 L TFSi 4v direct injection engine EA 211

VW/AUDI Drive Gear Fixing Tool 0XAT0027 - Introduction: Secure position of the high pressure pump chain drive sprocket using setting tool. Use in vehicle with mechanical vacuum pump. - Application: Passat 2006>, Touareg 2003>, Audi Q7 2007>, and the diesel engine

VW/AUDI Drive Gear Fixing Tool 0XAT0026 - Introduction: Secure position of the high pressure pump chain drive sprocket using setting tool. Use in vehicle without mechanical vacuum pump. - Application: Use for adjusting the valve timing on 3.0, 3.6 liter 6 cylinder 4v engine. Passat 2006>, Touareg 2003>, Audi Q7 2007>, and the diesel engine

VAG Camshaft Rotating Alignment Tool (1.8/2.0 Tsi) 0XAT0003 Application: Magotan 2.0 FSi, Sagitar 1.8T Fsi

105


Timing Tools - VAG Petrol Engine Setting/Locking Kit – 1.2/1.4 Tsi – Belt Drive & Camshaft Alignment Kit 1.4 Tfsi For VAG 0XAT0023 - Introduction: Suitable for the latest VAG 1.2/1.4 TSi belt drive petrol engine, and 1.4 TSi ACT. Contain the essential tool for the camshaft locking, the crankshaft replacement, and the timing belt replacement. Secure the camshaft when checking and adjusting the valve timing. Use for locking the camshaft on the vehicle equipped with 1.4 TFSi engine. From 2012 VAG introduces a new version of 1.4 TFSi petrol engine. This new engine is equips with CoD (Cylinder on Demand) technology that the engine switches between 2 and 4 cylinder running modes to maximize the efficiency. The new engine designs for the new camshaft locking tool. - Application: Model: Audi: A1 (12-15), A1 Sportback (12-15), A3 (13-15), A3 Sportback (12-15) Seat: Ibiza (12-15), Leon (12-15), Toledo (12-15) Skoda: Fabia (10-13), Octavia II (10-13), Octavia III (10-15)

Petrol Engine Setting / Locking Kit For VAG 1.2/1.4 TFSi, 1.4/1.6 FSi – CHAIN DRIVE 0XAT1538A - Introduction: The timing kit is suitable for 1.2/1.4 TFSi and 1.4/1.6 FSi engines. The kit contains the essential tool for TDC positioning tool, camshaft setting plate and tensioner locking pin. - Application: Model: Audi: A1 (10-12), A3 (03-12) Seat: Altea / Altea XL (08-12), Ibiza / Cordoba (08-12), Leon (07-12), Toledo (07-09) Skoda: Fabia II (07-12), Octavia II (04-12), Roomster (06-12), Superb II (09-12), Yeti (09-12) VW: Caddy/Caddy Maxi (10-12), Eos (06-12), Golf (03-12), Golf Plus (03-12), Jetta (06-12), Passat (05-11), Polo (02-12), Scirocco (08-12), Tiguan (07-12), Touran (03-12)

Petrol Engine Setting/Locking Kit – AUDI 3.0 V6 – BELT DRIVE 0XAT1558 - Introduction: Suitable for 3.0 liter V6 petrol engine. Kit contains the camshaft and crankshaft setting, and the locking tool, plus the camshaft sprocket adjusting tool and the tensioner retaining pins. - Application: Holding/Alignment the fixture, use to align and hold the camshaft Model: Volkswagen: Polo Diesel Audi: 100 since 1991, A4 3.0 V6 (01-08), A6 3.0 V6 (01-08) with engine Z15L TDi

106


Timing Tools - VAG Diesel Engine Setting/Locking & Hp Pump Removal Kit For VAG 2.7D, 3.0D TDi V6, 4.0D, 4.2D TDi V8 CHAIN DRIVE 0XAT1621A - Introduction: The comprehensive kit requires for service work on the timing chain, the cylinder head, the HP pump and the engine timing application on VAG 2.7D - 3.0D TDi V6 and 4.2D TDi V8 common rail diesel engines. The kit includes HP pump sprocket remover and requires the locking pin, it also includes the tool to cover later 3.0D TDi V6 and 4.2D TDi V8 common rail second generation engines. - Application: Model: Audi: A4 (05-13), A5 (07-13), A6 (04-13), A6 Allroad (06-11), A7 (10-13), A8 (03-13), Q5 (08-13), Q7( 06-13) Volkswagen: Phaeton (04-13), Touareg (05-13)

Camshaft Adjustment Tool For VAG 0XAT1458A - Introduction: The set of 3 assembly camshaft tools. For installation and removal 4/3 way the central valve for the camshaft adjustment. This set includes the original tool T10352 and the new version T10352/1 and T10352/2. The set of 3 sockets, 3/8" drive, and outside diameter 34 mm. - Application: 4 cylinder injection engine (1.8 liter and 2.0 liter engines, chain drive) Model: Audi: A3 (2004), A3 (2012), A4 (2008), A5 Cabriolet (2009), A5 Coupe (2008), Q5 (2008) Volkswagen: Passat (2006), Passat CC (2009) Audi A3 with 4 cylinder petrol direct injection, 1.8/2.0 liter 4v TSFi engine with the chain

Engine Timing Tool â&#x20AC;&#x201C; VAG 3.0 V6 0XAT1570 Introduction: The engine timing tool kit is for Audi A4/A6 3.0 V6 engine with engine code ASN/BBJ 2001-.

VW/AUDI Tension Pulley Holding Wrench 0XAT1461 - Introduction: Tensioner wrench with ďŹ ve adjustable positions for use on many VAG models where access is restricted. The adjustable key allows to tight the free roller in spaces even limited. - Application: Five adjustable positions for use on many Volkswagen Audi Group models. 4 mm Hex Key to adjust the positioning 18 mm pin centers/3 mm pin

107


Timing Tools - VAG Engine Timing Tool Kit For VAG 1.0 1.2 1.4 0XAT0007A - Introduction: This kit is for the latest generation FSI VAG petrol engines fitted to Audi, Seat, Volkswagen and Skoda models include the new 1.4lt CoD engine. The CoD (Cylinder on Demand) feature is used in the modern turbocharged petrol engine that has a Cylinder Cut Off system which reduces from 4cylinders to 2 cylinders when cruising – giving better miles per gallon • Including: Audi: A1/A Sportback, A3 Sedan, A3 Cabrio, A3 Saloon, A3, A3 Sportback, Q3 Seat Leon, Leon ST, Ibiza, MII, Skoda Fabia S111 and Estate, Octavia 111, Yeti, Outdoor, Citigo • Volkswagen Golf V11, Golf V1 Cabrio, Up!, Jetta, Passat, Polo, Golf SV, Sportsvan, Golf V11, Estate, - Application: Audi: (2012-2016) TFSI/G-TRON/TFSI CoD A1/A1 Sportback A3 Cabrio /A3 Saloon/A3/A3 Sportback Q3 Seat: (2012-2016) TSI/LPG//TGI/TSI ACT Mii Leon /Leon ST Skoda: (2013-2016) CNG CitigoFabia III/Fabia III Estate/Octavia III Volkswagen: (2012-2016) GTE/HYBRID/BLUEMOTION/ TSI/TSI ACT/BLUE GT Golf VII/Up/Jetta/Passat/Golf SV/Sportsvan/Golf VII/Golf VII Estate/ Golf VII Wagon/ Golf SV/Sportsvan/Golf VI Cabrio/Golf VII Estate/ Golf VII Wagon/Polo

Twin Camshaft Locking Strap - Audi 2.6, 2.8 V6 0XAT1430 1. For Audi 100/80/A4/A6/A8/ Cabrio with 2.8/2.6 Turbo engines, V6 2 valve engines 2. OEM No 3243 / Engine code AAH,ABC 3. Used to lock the camshaft 4. Applications: Audi 80 2.6/2.8, A4 2.6/2.8 100 2.6/2.8 A8 2.8 Cabrio 2.6 Coupe 2.6/2.8 1991-2000

Twin Camshaft Holding Bracket - VAG 2.4, 2.7, 2.8, 3.0 V6 0XAT1431 1. Locating the camshafts and crankshaft during timing belt replacement and other service applications 2. Applications: Audi; A4 (94-08),A6 (95-05), A8 (96-02),Allroad (00-05), Skoda;Superb (02-08), VW; Passat (96-05)

Twin Camshaft Holding Bracket - VAG 3.7, 4.2 V8 0XAT1432 1. For 3.7 and 4.2 V8 engines in Audi and VW models 2. Applications: Audi; A6/Quattro(99-05), S6 (00-04), A8 (99-06), S8 (99-03), RS4 (03-05),RS6 (03-04), VW;Touran (03-06),Phaeton (03-04)

108


Timing Tools - VAG Camshaft Adjusting Socket - Audi 0XAT1645 1. Adjust variable valve timing on the exhaust side camshaft to basic position 2. Special groove nut socket to turn the camshaft adjuster into position. 3. Applicable: Audi 3.0L V6 5V

Engine Timing Tool VAG 2.5D 0XAT1467 1. For gear driven engines where the engine utilises the VAG PD fuel injection system 2. Applications: Volkswagen Touareg,Transporter (03-09). 3. Engine codes:AXE/AXD/BAC/BLK/BLJ/BNZ/BPC/BPE/BPD 2. 5 Tdi PD

Engine Timing Tool Kit - VW 2.5 TDI PD 0XAT1468 1. Work on Volkswagen Touareg and Transporter 2.5 TDI models 2. Engine codes: BAC/BLK/BPD/AXD/AXE/BLJ/BNZ/BPC (03- ) 3. 4.9TDI models with engine code AYH (03- ) 4. Contents:1 - Special Wrench, 5. OEM Code: T102251 - Puller, T10221A1 - Adjuster Puller, T10222A 6. Applications: VW; Touareg,Transporter (03-09)

Engine Timing Tool Kit - VAG 2.5 & 4.9 Tdi 0XAT1469 1. For VAG 2.5/4.9D TDi 2. Use on Volkswagen Touareg and Transporter 2.5 TDi models 3. Engine codes: BAC/BLK/BPD/AXD/AXE/BLJ/BNZ/BPC (03-) 4. Fits 4.9TDI models with engine code AYH (03-)

Camshaft Adapter Socket - VAG 0XAT0010 1. Special shape design to engage with camshaft gear pulley. 2. Used to rotate and hold intake camshaft during timing chain service on 4-cylinder 1.8 and 2.0 liter TFSI direct injection engine (generation III). 3. 1/2â&#x20AC;? Drive. 4. Applications: Audi: A4 2008~, Cabriolet 2009~, A5 Coupe 2008~, Q5 2008~, A3 2012~ SEAT: Alhambra 2011~, Exeo 2009~, Altea 2009, Leon 2009~, Altea XL 2009~, Altea Freetrack 2009~ 5. OEM Ref: T40266

109


Timing Tools - VAG Crank Pulley Holding Tool - VAG 0XAT1220 1. For VAG 1.4 & 1.6 16v twin cam petrol engines (97on) 2. Conjunction with AT1221 twin cam locking set or timing belt replacement

Crank Pulley Holding Tool - VAG 0XAT1221 1. For VAG 1.4 & 1.6 16v twin cam petrol engines (97on). 2. Conjunction with AT1220 twin cam locking set or timing belt replacement

Vibrator Damper Locking Tool - VW 0XAT1203 1. Lock the vibrator damper (pulley at the crankshaft) when the central bolt has to be loosened (e.g. changing of the timing belt) 2. Application: VW engines (e.g. VW T4Van with 5-Cyl. Diesel)

Adjustable Reaction Tool - VW/Audi 0XAT1204 1. For counter bearing of V-belt pulley/vibration damper while removing the crankshaft-centre bolt. 2. Applications: VW-Audi 5 cylinder diesel engines up to 1997

Crankshaft Pulley Puller 0XAT1126 1. Crankshaft Pulley Puller for VW-Audi 4 and 5 Cylinder engines 2. Remove the front pulley from the crankshaft

Vibration Damper/Crankshaft Reaction Wrench Set 0XAT1353 1. For VW-Audi 4- and 5-cylinder engines 2. Both with and without vibration damper; e.g. VW T4. 3. Lock the crankshaft pulley when loosening or tightening the crankshaft central retaining bolt

110


Timing Tools - VAG Crankshaft Balance Wrench - VW/Audi 0XAT1354 1. 1200 mm long 2. Extension handle to hold the crankshaft balancer (pulley) and loosen the main bolt,e.g. for timing belt replacement 3. Countering the wrench is inserted into the balancer 4. Suitable in restricted areas 5. Applications: Audi 100, A6 5-cyl. Petrol 6. Diesel engines VW T4 2.4l D and 2.5TDi Volvo 2.5TDi 7. Until `01, on S70, S80, V70, 850

Crankshaft Grinder Wrench - VW/Audi 0XAT1355 1. Use crankshaft grinder on hard-to-access crankshafts 2. Material: Aluminium 3. Overal length: 600mm 4. For VW/Audi vehicles with transverse engine

Water Pump Removal Kit - VW 2.5 TDI PD 0XAT1415 1. Removing the water pump on Pumpe Duse, diesel, gear drive engines. 2. Align the engine in TDC position. 3. Applications : VW; Touareg,Transporter (03-09)

Crank Locking Pin M12 x 1.5 - Audi 0XAT1433 1. Lock the crankshaft at TDC position when replacing the timing belt 2. Size: M12x1.5 3. Applications: Audi 3.0L, V6 5 Valve

Crank Locking Pin M18 x 1.5 - VW/Audi 0XAT1439 1. Lock the crankshaft at the tdc position while replacing the timing belt or removing the crankshaft bolt. 2. Size: M18x1.5 3. Applications: VW/Audi models with 2.7 &2.8 liter V6 engines.

Crank Locking Pin M14 x 1.5 - Audi 0XAT1440 1. Lock the crankshaft at the tdc position while replacing the timing belt 2. Size: M14 x 1.5 3. Applications: Audi A6 2005 6 cylinder engine 2.4 liter and 3. 2 liter FSI.

111


Timing Tools - VAG Crankshaft Locking Tool Kit - Volkswagen 0XAT1466 1. Works on Volkswagen Touareg and Transporter 2.5 TDI models 2. Engine codes: BAC/BLK/BPD/AXD/AXE/BLJ/BNZ/BPC (03- ) 3. 4.9TDI models with engine code AYH(03- ). 4. Contents: 1 - Crankshaft Locking Tool,OEM Ref. T10195 3 - Guide Pins, OEM Ref. T10200

Counter Hold Tool - VAG 0XAT1479-01 1. This tool used for stopping the engines crankshaft pulley / vibration damper when center bolt for crankshaft is installation or disassembly. 2. 840mm (33" inches) long, with 4 pins, size 5mm with 42mm pin spacing. 3. Application: Mainly used for car Audi A3 (2004 -up), engine 1.8 liter TFSI (chain drive), also ďŹ ts Audi A4 / A5 Q5 (2009 -up), engine 2.0 liter TFSI (chain drive).

Crankshaft Seal Installation Tool - VAG 1.4 1.6 16V 0XAT1352A 1. 2. 3. 4.

For Volkswagen and Audi Group models 16V 1.4/1.6 engines OEM Code:T10017 Applications:VAG 1.4/1.6 16v engines Use on Fiat engines

Pulley Wrench 32mm - VW/Audi 0XAT1230 1. Adjusting toothed belt at the automatic tensioning pulley 2. Size: 32mm 3. For Audi,Volkswagen 2.5 TDI engines and some Volvos 4. OEM Code: 3355

Tensioner Locking Pins - VAG 0XAT1205 1. Holding the tension on the cam belt and serpentine (auxiliary) belts 2. For VAG engines OEM Nos T10115, T40011 - Timing Belt Tension pins and T10060/A - Serpentine Tension pin 3. Fitted to 1.4/1.9/2.5 Tdi PD/TFSI Petrol or diesel

112


Timing Tools - VAG Pulley Locking Tool VW / Audi 0XAT1081 1. Suitable for holding the water pump pulley on VAG vehicles 2. For vehicles ďŹ tted with air conditioning 3. Applications: VAG - Vehicles with Air Conditioning

Pulley Locking Tool VW / Audi 0XAT1082 1. For locking the water pump pulley on Audi 80 & A4 and VW Golf, Passat, Polo when air conditioning is not ďŹ tted 2. Applications: VAG - Vehicles with Air Conditioning

Reaction Wrench 0XAT1225 1. For tensioning multi-vee belts 2. Equipped with hardened and milled pins 3. Allow belt tension achieve the alternator 4. Designed not to slip out of the holes in the alternator 5. For VW-engines on which the multi-vee belts can tightened at alternator 6. Drive:1/2" 7. Diameter (pin to pin): 157 mm

Auxiliary Belt Tensioner Tool - VAG 0XAT1739 1. Auxiliary belt tension tool for V-ribbed belts 2. Compatible with variety of VAG engines 3. Use with standard 1/2" drive ratchet or extension bar

Oil Drain Assembly Tool 0XAT0012 - Introduction: Removing and installing oil drain plug of plastic sumps - OEM Number: T10549 - Application: AUDI /SEAT LEON/VOLKSWAGEN GOLF VII 2.0lt 4v turbo direct injection Gen III 2013

Timing Tool Kit - VAG 1.8, 1.8T, 2.0 Petrol 0XAT1460 - Kit includes tension adjuster, locking and setting tools. - Applications: VAG; 1.8/1.8T, 2.0 20v Petrol Engines with adjustable belt tension roller. Audi; A4, Cabriolet, A6. Seat; Ibiza. Skoda; Superb. VW; Polo, Eos, Passat.

113


Timing Tools - OTHER Universal Pulley & Fan Clutch Holder Set 0XAT1080 - Introduction: Design to remove and install fan clutch and rotate or restrain the camshaft pulley. Adjust the jaw spread and the interchangeable pins. - Application: Adjust from 40mm to 220mm plus the set of four pins ranging from 6mm to 16mm in diameter. Pin sizes: 5.5x 34.7mm long (2) 7.5x 34.3mm long (2) 9.7 x 35mm long (2) 15.8 x 35.10mm long (2)

Cam Belt Tension Gauge 0XAT1008 Introduction: This tension gauge can use to adjust tension on the cam belt that movement of the timing belt is measured by load (Nm). Suitable for using on the cam belt with the various belt width. Easy to use with clear incremental marking and knurled knob for the precise measurement. Dual scale allows reading from the top or the bottom of tool.

Auxiliary Stretch Belt Removal/ Installation Tool 0XAT1041 - Introduction: Design for recommended removal and installation of the elasticated or the stretch drive belt fitted to the modern auxiliary drive system such as the alternator or the power steering. Prevent damaged to the pulley and prolonged life of the belt. Two tools are included, one for installation and one for removal. Fit the crankshaft pulley device. - Application: Suitable for engine of the elastic ribbed belt such as Alfa Romeo, BMW, Chrysler, Fiat, Ford, Mercedes Benz, PSA, Seat, Skoda, Smart, Volvo, VW-Audi, etc. The tool set is quick and easy removal and installation of the new elastic ribbed belt required.

Universal Holder For Flywheel 0XAT1319 - Introduction: Necessary for dismantling or re-assembling the flywheel, the clutch pressure plate and the belt pulley. - Application: Require when installing and removing the flywheel, the clutch plate and the pulley. Length: 250mm(L) Weight: 0.5kg

114


Timing Tools - OTHER Mounting Tool Set For Flexible Multiribbed Belt, 11 Pcs 0XAT0707 This set allows a damaged free mounting of the flexible multi-ribbed belt. The types of belt do not require an idler, but these special tools are for a convenient and gentle assembly.

Chery Engine Timing Tool Set (A3, A5) 0XAT4375 - Introduction: Special design holds and aligns the camshaft for adjusting the timing. - Application: Chery: A3, A5, Tiggo Engine Code: SQR481, 484

Engine Locking Kit For

VAUXHALL/OPEL/CHEVROLET 2.0 SOHC 0XAT1315 - Introduction: Develop for the latest Vauxhall/Chevrolet 2.0 common rail diesel engine found in Vauxhall Antara, Chevrolet Captiva, Cruze, Epica, Lacetti and Nubira. This kit holds the correct timing position of the crankshaft and the camshaft whilst changing the timing belt on 16v SOHC belt drive diesel engine. - Application: Model : Vauxhall/ Opel : Antara (Antara 2.0) Chevrolet : Captiva(20 lt. VCDi), Cruze(20 lt. VCDi), Epica (20 lt. VCDi), Lacetti (D), Nubira (2.0 lt. D)

Diesel Engine Setting/Locking Kit For CHRYSLER/JEEP/MERCEDES BENZ – 2.1D, 2.2D, 2.7D/3.2D CDi/CRD – CHAIN DRIVE 0XAT1334 Application: A timing tool set which covers a large of model in Mercedes Benz range, including the petrol and the diesel engines. The set includes flywheel plate locking tools and camshaft locking pins. Suitable for Chrysler PT Cruiser 2.2 CRD and Jeep Grand Cherokee 2.7 CRD Model: Chrysler: PT Crusier (02-09) Jeep: Grand Cherokee (01-05) Mercedes Benz: C-Class (98-10), CLC-Class (08-12), CLK (02-09), E-Class (98-10), G-Wagen (01-09), M-Class (99-05), SClass(99-06), Sprinter (99-10), V-Class (99-03), Viano (03-10), Vito (99-10)

115


Timing Tools - OTHER Diesel Engine Setting/Locking Kit For CHRYSLER/JEEP, LDV – 2.5D, 2.8D CRD 0XAT1680 - Introduction: The kit covers the engine timing and the balancer shaft setting on 2.5 & 2.8 CRD diesel engines in Chrysler, Jeep, and LDV models. Contain the camshaft, the flywheel and the balancer shaft locking pin plus the tensioner adjuster. - Application: Model: Chrysler: Voyager(01-08), Grand Voyager(01-08) Jeep: Cherokee(01-08) LDV: Maxus(05-09)

Timing Tool Set For MERCEDES BENZ AND CHRYSLER CHAIN ENGINES 0XAT1890 - Introduction: Suitable for a wide range of Mercedes Benz, including the petrol and the diesel engines. The set includes flywheel plate locking tools and camshaft locking pins. - Application: Use to fix the flywheel gear to remove & install the crankshaft pulley center bolt. - Model & Engine Code: Mercedes Benz: M112, M113, M137, M155, M156, M272, M273

Petrol Crankshaft Pulley Removeral & Installation Tool Kit For CHRYSLER 1.8/2.0/2.4 ENGINE 0XAT1843 - Introduction: For the timing belt replacement is on certain Chrysler 1.8, 2.0 and 2.4 petrol engines that these are necessary to remove the crankshaft pulley in order to remove the timing belt. In addition to this kit must use in conjunction with other suitable puller. This is a difficult pulley to remove and install, and the special tool is required. - Application: Model: Chrysler: Grand Voyager (94-08), Neon (95-04), PT Cruiser (00-09), Stratus (94-01), Voyager (94-08) Jeep: Cherokee (01-06)

Engine Timing Tool Set For CHRYSLER 2.8D 0XAT4370 - Introduction: A kit consists of the component required to lock the crankshaft and the camshaft in the timed position to allow removal and replacement of the cam belt and the associated component. - Application: Model: Jeep: Cherokee (2008-2011) Chrysler: Grand Voyager (2008-2011) MC: ENS (51C), VM64C

116


Timing Tools - OTHER Diesel Pump Timing Set 0XAT1288 - Introduction: Suitable for the timing distributor type diesel fuel pump on the engine fits with Bosch VE Rotary, Kiki, Nippon Denso, CAV Roto - diesel - top entry port. These systems are mainly found on the car and the light commercial vehicle. - Application: Model: Alfa Romeo, Audi, BMW, Saihatsu, Fiat, Ford, Isuzu, Iveco, Lancia, Land Rover, Mazda, Mitsubishi, Nissan, Renault, Rover and Volkswagen

Glow Plug Removal Set 0XAT1422 Introduction: Design to remove the damaged/broken glow plug from cylinder head. Suitable for glow plug with M8 x 1mm or M10 x 1 mm thread. The set includes all required adaptors for centering, drilling and pulling for the safe removal of the glow plug.

28 PCS Glow Plug Thread Repair Tool For VW/AUDI 0XAT0001 - Introduction: -For quick and professional drilling out damaged or torn-off glow plugs without removing the cylinder head -Allows recutting or repairing of the glow plug thread and cleaning of the electrode bore -Exact depth and drilling angle are reached using guide sleeves - Suitable for: -M10x1 glow plug thread on e.g. WV Passat, Audi V6 TDI with 2.5I / 2.7l / 3.0l engines -with engine codes: AFB, AKE, AKN, ASB, AYM, BAU, BCZ, BDG, BDH, BFC, BKN, BKS, BMK,BNG, BSG, BUN, BUG -includes the following tools: -cover plate for intake ports -compressed air adapter for injector bore -9.1 mm drill for M10x1 -11.1 mm drill for M12x1 -tap with guide sleeve for M10x1 threads -tap with guide sleeve for M12x1 threads -10 threaded inserts for M10x1 with external thread M12x1 -M6x1.25 taps -extraction tool -2 reamers 4.8 mm, long and short type -reamer 5.8 mm long type -3 guide sleeves φ 17.5 mm OD – 38 mm length Inside φ 9 mm and 13 mm – 63 mm length 13 mm inside φ -2.4 – 5.5 mm tapping holder 240 mm long with 1/4” drive -3 extractor electrodes for 2.5 – 3.5 -4 mm

117


Timing Tools - OTHER Master Engine Timing Tool Kit For TOYOTA, MITSUBISHI 0XAT1682 - Introduction: This comprehensive tool kit includes a large number of crankshaft pulley holding tool for using on a wide range of Toyota vehicle. The OEM reference is included possible but the kit includes a variety of different sized struts and adaptors to cover any variation. This master engine timing tool kit specifically compiles to give a comprehensive range of the engine timing locking tool for the cam belt, the chain and the gear. - Application: For Toyota, Mitsubishi Important kit is for working on the motor, e.g. the timing belt, the general motor setting and the camshaft.

Diesel/Petrol Crankshaft Holding Tool For VOLVO – BELT DRIVE 0XAT8710 - Introduction: Enable the crank to be held whilst doing up the center pulley nut which is very tight. Remove for the pulley mounting bolts, then the tool is used the original bolts with the roll pin is slotted liming up with the roll pin, held with 1/2"D bar. - Application: Volvo: C30 (06-10), C70 (98-10), S40 (96-10), S60 (00-09), S70 (97-07), S80 (98-06), V40 (96-10), V50 (04-10), V70 (97-07), XC70 (02-07), XC90 (02-10)

Petrol Engine Setting/Locking Kit For VOLVO 3.0 & 3.2, L AND ROVER FREEL ANDER II 0XAT1851 - Introduction: This setting and locking kit contains the tool required when replacing the timing chain or carrying out the engine work required removal of the cylinder head and/or the camshaft. The kit is suitable for a wide range of Volvo vehicle fitted with 3.0 liter turbo charged and 3.2 liter naturally aspirated chain drive engines, and also Land Rover Freelander 3.2 i6 variant. - Application: Model: Volvo: S80 (07-15), XC60 (08-15), XC70 (06-14), XC90 (10-14) Land Rover: Freelander II (11-14)

Engine Timing Tool Set For VOLVO 1.6/1.9/2.0/2.4 DIESEL 13 PCS 0XAT4373 Introduction: Develop to change the cam belt on the single and the twin cam belt diesel engines found in Volvo range. The kit provides the locking tool required for both the timing belt change, and dismantling of the gear drive cam fitted to the twin cam equipped engine in Volvo range.

118


Timing Tools - OTHER VOLVO B4204 (8 Speed Transmission) Camshaft Alignment Tool Kit 0XAT0513 - Introduction: Special design to align the engine camshaft and the crankshaft position, and to correct into the side cover. - Application: Position Setting Model: S60L, S80 (07-), V40 (13-), V40 Cross Country, V541, V60, V60 Cross Country, V70 (08-), XC60, XC70 (08-), XC90 (16-), S60 (11-) Puller Model: S60 Cross Country, S60L, S80 (07-), V40 (13-), V40 Cross Country, V541, V542, V60, V60 Cross Country, V70 (08-), XC60, XC70 (08-), XC90 (16-), S60 (11-) Counter-hold Model: S60L, S80 (07-), V40 (13-), V40 Cross Country, V541, V542, V60, V60 Cross Country, V70 (08-), XC60, XC70 (08-), XC90 (16-), S60 (11-) Drift Model: S60L, S80 (07-), V40 (13-), V40 Cross Country, V541, V542, V60, V60 Cross Country, V70 (08-), XC60, XC70 (08-), XC90 (16-), S60 (11-) Counter-hold Model: S60L, S80 (07-), V40 (13-), V40 Cross Country, V541, V542, V60, V60 Cross Country, V70 (08-), XC60, XC70 (08-), XC90 (16-), S60 (11-)

Petrol Engine 2.5 Turbo (Euro 4) Timing Belt For VOLVO/FORD 0XAT0514 - Introduction: A set of locking tools and camshaft of the regulatory device for engine: Volvo 2.5 Turbo Petrol / Ford. Enable the crank to be held whilst doing up the center pulley nut which is very tight. Remove for the pulley mounting bolts, then the tool on using the original bolts with the roll pin slots lined up with the roll pin and held with 1/2"D bar. - Application: Model: Volvo: C30 (06-10), C70 (98-10), S40 (96-10), S60 (00-09), S70 (97-07), S80 (98-06), V40 (96-10), V50 (04-10), V70 (97-07), XC70 (02-07), XC90 (02-10) Ford: Focus, Mondeo, S-Max 2.5 ST, Galaxy 2.5 ST (2005- )

VOLVO Timing Tool Set (T4,T5) 0XAT1906 - Introduction: Develop specifically for 1.6 direct injection petrol engine fitted with variable valve timing (VVT) and found in both Ford and Volvo range. To adjust and fix the angle of the camshaft and the crankshaft. - Application: Volvo: V4 1.6L, 2.0L T4, T5 engine

119


Timing Tools - OTHER VOLVO Timing Tool Set 0XAT0604 - Introduction: Comprehensive the setting and locking kit covers the engine which is ďŹ tted to a large range of Ford, Volvo and some Mazda vehicle. Contain the time saving tool to correctly align the timing cover on Ford and Volvo engines and the crankshaft pulley holder for Mazda engine. - Application: Model: Ford: Fiesta (08-15), B-Max (12-15), C-Max (03-07), C-Max (07-10), C-Max (10-15), Focus (04-11), Focus (11-15), Grand CMax (10-15), Touneo Connect (13-15), Grand Touneo Connect (13-15), S-Max (10-15), Galaxy (10-15), Kuga (13-15), Transit Connect (13-15) Volvo: S80 (09-14), V40 (09-14), V40 Cross Country (10-14), XC60 (09-14), S80 (09-14), V60 (10-14), V70 (09-14), S60 (11-11) Mazda: Mazda 5 (CW) (10-15), Mazda 6 (GH) (10-13)

VOLVO Crankshaft Camshaft Cam Engine Alignment Timing Locking Tool Set 0XAT1600 - Introduction: For alignment of the cam and the crankshaft, and also alignment of the cam and the crankshaft with the cam cover. This tool uses for alignment of the camshaft & the crankshaft on in-line 4, 5 & 6 cylinders. Twin cam motor through 2006. Maybe use to align the camshaft w/ the cam cover. - Application: Model: Volvo: 850, 960, S40, S70 and S90

Crankshaft Pulley Holder Tool - Volvo B230 0XAT1695 1. Keep the crankshaft pulley from turning when removing it to change the timing belt and/or the crankshaft seal on your B230 Engine. 2. On Volvos with automatic transmissions or when you don't have air tools 3. Fits over the tensioner stud for secure hold 4. Withstands torque specs speciďŹ ed by Volvo for crank bolt

Water Pump Sprocket Holder - GM Ecotec 0XAT1559 1. Holds the timing chain and gear in place 2. For removing or installing water pump 3. For Ecotec engines

120


Timing Tools - OTHER Camshaft Fixing Tool Set - Buick (GM HFV6) 0XAT1800 Applications : Easy tool for fixing camshaft for High Feature V6 (2.8L / 3.0L / 3.6L) From mid 2007 Engines: GM 2.8 / 3.0 / 3.6L OEM No. EN-48383

Twin Cam Adjustable Timing Locking Tool 0XAT1332 1. Design for twin cam locking tool 2. Adjusting the pin to lock the cam

Universal Camshaft Locking Tool Kit 2pce 0XAT1709 1. For toothed pulleys spaced between 0mm to 60mm apart 2. Universal, Adjustable, TwinCam and Diesel engines 3. Ensured the driver pulleys do not lose the relationship to the crankshaft during repair or changing the timing belt 4. 0XAT1709-01 - Twin Cams 0XAT1709-02 - Single Cams

Camshaft Holding/Rotating Tool 0XAT1423 1. For positioning of camshafts when timing engine or rebuilding cylinder head 2. Adjustable peg 3. Allow for varying pulley and belt thickness 4. Overall length: 320mm

Camshaft & Crankshaft Locking Kit 8pce 0XAT1015 1. Anodised aluminum chocks suitable for locking camshaft pulleys on twin cam engines 2. Includes flywheel locking tools for selected PSA (Citroen /Peugeot) and GM (Vauxhall/Opel)petrol and diesel engines 3. Applications: Citroen, Fiat,Isuzu, MG, Peugeot,Rover, Saab, Vauxhall/Opel, VW

121


Timing Tools - OTHER

Universal Timing Belt Fitting Tool 0XAT1102 1. Help position timing and auxiliary belts 2. On pulleys set deep in the engine bay 3. Overall length: 725mm

Flywheel Locking Tool 0XAT1152 1. The bottom pulley bolt can be loosened or tightened, when replacing the timing belt 2. Removal of the starter motor or gearbox 3. For fitment of the tool 4. Adjustment the tool 5. Allows to fit most vehicles 6. Use the vehicle's original bolts 7. Length: 130mm

Belt Tension Locking Pins 0XAT1232 1. For locking back belt tension devices while installing or removing cam or auxiliary drive belt 2. Wide range of vehicle and engine applications 3. Contents: Ø0.79mm, Ø1.24mm, Ø1.37mm, Ø1.49mm, Ø1.68mm, Ø1.92mm

Engine Timing Tool Kit -GM/SAAB 2L TURBO 0XAT0607 - Applications: Vauxhall/Opel Signum Turbo 2003-2008, Vectra-C Turbo 2002-2008, Saab 9-3 1.8T 2002-2011, 9-3 1.8T BioPower 2002-2011, 9-3 2.0t 2002-2012,?9-3 2.0t Bio Power 2010-2012, 9-3XT 2009-2011 - Engine codes: Z20NET, B207E, B207, B207L

Pulley-Extractor and Reaction Tool 0XAT1181 - Contents: 1 - Puller Plate 3 - Hook Φ20m 3 - Hook Φ26mm 3 - Shoulder Nut M10 1 - Pressure-Unit - Applications: VW-Audi, Seat,Skoda, Opel/Vauxhall, Frod, BMW,Mercedes, Peugeot, Citroen, Renault, Fiat & most of Japanese.

122


Engine Tools Camshaft Positioning Tool 0XAT1031A 1. Adjustable legs allow insertion of pegs into holes in camshaft pulleys 2. Suitable for coarse and ďŹ ne positioning of camshaft 3. For timing on a variety of engines including Ford Zeta and Zetec

Camshaft Sprocket Holding Tool 0XAT1031B 1. Use with AT1179 to hold valves closed whilst spring is compressed 2. Spark plug adaptor with M14 and M18 threaded 3. Fittings for car and light commercial use 4. Maintains cylinder pressure when air supply is cut 5. Requires a 90-125psi supply

Ratchet Action Cam Belt Tension Tool 0XAT1040 1. Use on diesel and gasoline engines. 2. Includes standard and metric adaptors for most popular domestic and import cars, trucks, tractors and stationary engines. 3. Features bright, easy-to-read gauge with green protective boot. 4. 0-100 PSI (0-700kPa) Gauge assembly. 5. Contents:Hose assembly. 6. Adaptor(1/8-27 to 1/4-18); Adaptor(1/8-27 to 3/8-18); Adaptor(1/8-27 to 1/4-28BSPT); Adaptor(1/8-27 to M10-1.0); Adaptor(1/8-27 to M12-1.5); Adaptor(1/8-27 to M14-1.5) 7. Street Elbow 8. 2" Large Nipple 9. Coupling

Auxiliary Stretch Belt Removal/ Installation Tool 0XAT1041 1. For the recommended removal and installation of elasticated or stretch drive belts 2. Fitted to modern auxiliary drive systems such as the alternator or power steering 3. Prevents damage to the pulley and prolongs the life of the belt 4. Two tools included, one for installation and one for removal 5. Fits crankshaft pulleys

Camshaft Pulley Holding Tool 0XAT1094 1. Hold the pulleys on Camshafts, Injection Pumps etc rotating when loosening the centre retaining bolt 2. Fit timing pulleys with a hole diameter of 16mm

123


Engine Tools Crank Seal Remover / Installer Kit 20pc 0XAT1360 1. Allows the crank seal to be replaced without dismantling the crank case saving time and costs 2. Avoids scraping the crank surface 3. Universal use covering a wide range of cars with oil seals with 27-58mm in diameter

Master Crank Seal Remover / Installer Kit 0XAT1361 1. Quick and easy work for both removal and installation work 2. Ideal for both crankshaft and camshaft seal 3. Includes wide size seal installers 4. Provided with 2 seal removers with different length and angle 5. Fits wide applications 6. Angled blade seal remover is ideal 7. For removing seals in limited space

Tensioner Adjuster Set - VAG 0XAT1090 1. Contains three specialised wrenches and pins required 2. Access the timing belt tensioners fitted to VAG petrol and diesel engines

Timing Belt Tensioner Tool Set 6pce 0XAT1101 1. Removing and installing timing belts with spring loaded idler pulleys 2. Long reach design with multi-positional extension 3. Allows access deep into the engine compartment and around obstructions 4. Contents:- 3/8" Drive Sockets 13, 15, 16, 18mm

Reaction Wrench - VW/Audi 0XAT1118 1. For V-ribbed belts 2. When changing the poly-V belt the permanent belt tensioning roller can loosened the reaction wrench 3. Application: VW Polo, Golf, Passat,T4 and Audi

Alternator Belt Tighting Tool 1/2" Drive 0XAT1130 1. Suitable for use on most alternators. 2. Designed for use with 1/2" drive ratchet wrench. 3. Simplifies a normally awkward task.

124


Engine Tools Serpentine Belt Tool Set 8pce 0XAT1325 1. Release tension on serpentine belt self-adjusting idler pulleys and push or pull to release tension 2. Contents: - 3/8" Driver Bar for socket and crowfoot wrenches - 1/2" Extension Bar - 3/8" Drive Sockets: 15, 16, 18mm - 3/8" Drive Crowfoot Wrench 13, 14, 15mm

Adjustable Camshaft Pulley Holding Tool 0XAT1501 1. With inter-changeable tips and several hole intervals 2. Suitable for timing pulleys with holes form minimum Ø12mm. e.g VW-Audi, Ford, Opel, Peugeot, Renault , Citroen, Rover, Volvo, Japanese vehicles, etc.

Belt Tensioner Tool - R50/52 Mini Cooper 0XAT1511 1. For MINI Cooper (non-S) 2. Make the job of replacing your serpentine drive belt much easier and faster 3. Compatible with 2002-2006 R50 MINI Cooper Hatchback and 2005-2008 R52 MINI Cooper Convertibles

Serpentine Belt Tool - Mini Cooper W11 Supercharged Engine 0XAT1512 1. Includes special wrench 2. Required to retract the serpentine belt tensioner when removing/installing the accessory drive belt 3. A tensioner locking-pin is also included. 4. Application: - 2005-08 Convertible Cooper S - R52 chassis - W11 engine - 2002-06 Cooper S Coupe - R53 chassis - W11 engine

Stretch Belt Installation 0XAT1344 1. This tool has been designed specifically for use on the new Stretchy Belt fitted to some of the latest models. 2. This tool fits over the lip of the pulley and a special bolt holds it in place. 3. The belt can then be rotated onto the pulley without twisting the belt. 4. Suitable for modern cars.

125


Engine Tools Stretch Belt Tool Set 2pc 0XAT1346 Fitting stretch belts on a variety of modern vehicles

Ratcheting Serpentine Belt Wrench Set 0XAT8700 1. Service approximately 90% of all vehicles equipped with spring-loaded serpentine belt tensioners. 2. Ratcheting action allows quick an easy positioning of wrench driving end for tensioner access from any angle. 3. For use when servicing serpentine drive belts or any belt-driven accessories. 4. Specifically designed to fit into tight areas. 5. Socket size:8,12,13,14,17,18,19 & 24mm; 3/8”, ½’ & 5/8”

Stretch Belt Service Tool 0XAT1345 1. Small size with dual function for quick installation or removal stretch belt from pulley. 2. Strong magnet seat to help user fix this tool on pulley tightly. 3. Investment casting from alloy steel.

VAG 7-Speed DSG Clutch Chain Tool Kit 0XAT8707 Use for installation and removal work when repairing 7-speed DSG and some 6-speed DSG gearbox components. Applications: VW: Golf 2004 >, Golf Plus 2005 > Audi: A3 2004 >, with 7-speed gearbox (code 0 AM), Touareg 2003>, with 6-speed gearbox (code 08 D)

Diesel Injector Puller 0XAT1237 1. With M8/M12/M14 adaptors 2. Assists removal of stubborn Bosch and Lucas diesel injectors 3. Saves time and money when injectors are difficult to remove

3/8" Drive Special Socket Set 6pc 0XAT1195 1. Allows access to difficult pipe connectors and wired sensor units (NOT Lambda) 2. Ideal for loosening of ABS pipes, master cylinder pipes, diesel injection pipes & wired sensors 3. Applications:Peugeot and Citroen with 2.0 engines 4. Sizes: 25mm/27mm/29mm/30mm

126


Engine Tools Diesel Injector Puller Set 8pc 0XAT1210 1. With sliding hammer 1,70 kg 2. Extra short: only 225 mm 3. Suitable for Mercedes-Benz CDI engines OM 611, 612, 613 4. Overall length 350 mm 5. 2 extract adapters M17X1,0 & M27X1,0

Glow Plug Tool - Mercedes CDI 0XAT1290 1. For unscrewing and disassembly of glow plugs in cylinder head 2. Especially for glow plugs that are stuck because of carbonizationremains 3. Cylinder need not to removed 4. Fits Mercedes 10mm glow plugs 5. Engine codes:611-612-613 etc

BMW Common Rail Injector Remover Kit 0XAT1293 1. Removing BMW Common Rail injectors 2. For M47TU, M57 and M57TU engines 3. Allows the removal of tightly ďŹ t injectors nozzles without having to remove the cylinder head 4. Engines:BMW Common-Rail M47TU, M57 and M57TU

BMW Common Rail injector Removing & Cleaning Kit 0XAT1294 1. Removing BMW Common Rail injectors 2. For M47TU, M57 and M57TU engines 3. Allows the removal of tightly ďŹ t injectors nozzles 4. Without removing the cylinder head and injectors seat cleaning t 5. Engines:BMW Common Rail M47TU,M87 and M87TU

Injector puller BMW M45 / M57 0XAT1295 1. This specially designed tooling enables the successful extraction of seized in injectors from the BMW M47 and M57 engines. 2. The tooling works in situ, with no need to remove the rocker cover or the cylinder head from the vehicle.

127


Engine Tools Bosch Injector Dismantling Tool 1/2"Drive 0XAT1399 1. Removing the internal part of Bosch Injectors 2. Size: 1/2"Drive x 10mm Hex Bit (Tamper-proof)

VAG Diesel Injector Puller 0XAT1400 1. For quick extraction of diesel injectors 2. Fitted to VW/Audi engines, mainly Pumpe Duse 3. Features 0.7kg slide hammer and four adaptors 4. Applications: 1.4SDI/TDI, 1.9D/SDI/TDI/TDI(PD), 2.0TDI (PD), 2.5TDI/TDI(PD), 2.8TDI (PD),Common Rail- 2.7/3.0/4.2TDI

Diesel Injector Puller Set 14pc 0XAT1465 1. For the removal of Bosch, Delphi,Denso and Siemens diesel injectors 2. Allows hammer to use in conďŹ ned areas 3. Contents: Slide Hammer, 1/2"Sq Drive Sockets;25, 27, 29, 30mm, Tamper-Proof Key,5 x Adaptor (Bosch,Delphi, Denso,Siemens), Ball Joint

Injector Puller Set - Mercedes CDI Engines 0XAT1478 1. Removing stubborn injectors on Mercedes-Benz vehicles 2. Fitted with CDi engines 3. Some injectors can be removed without removing the cylinder block 4. Internal and external forks are included for drawing out the injector

Universal Remover For JTD On Diesel Engine 0XAT1479 1. Uiversal injector remover with 4 adjustable feet for JTD diesel engines. 2. Remover for common rail injectors. 3. Applications: FIAT, ALFA, OPEL, SAAB, SUZUKI Engines: JTD

Injector Puller Set- Mercedes CDI Engines 0XAT1487 1. For Mercedes CDI engines OM 611,612,613, etc 2. For loosening injectors from the cylinder head 3. No more disassembling of the cylinder head necessary

128


Engine Tools Injector Puller Set - Mercedes CDI Engines 0XAT1488 1. For Mercedes-Benz CDI engines the series OM611, OM612, OM613 2. Overal length with adaptor 500mm, with claw 570mm 3. Contents: 1 - Sliding Hammer (1,85 kg, 470 mm long) 1 - Adapter with internal thread for direct mounting on the injector 1 - Sliding Hammer 1 - Injector Claw

Diesel Injector Remover For Common Rail- Diesel Engines 0XAT1504 1. Includes: 4.8kg Slide hammer (1pc); M18 x 15 Universal joint (1pc); Special hex bit insert ½" drive 10mm with bore Ø7.5mm (1pc) & 10mm with bore Ø6.5mm (1pc); M14x1.5 / M16x1.0 / M17x1.0 / M20x1.0 / M25x1.0 / M27x1.0 Injector disassembly adapter (6pc) 2. Adapters & Applications: M14 x 1.5 - BMW M47, 211 CDI M16 x 1.0 - Toyota 2.2 M17 x 1.0 - MB Bosch M20 x 1.0 - Denso M25 x 1.0 - Siemens M27 x 1.0 - Siemens

Diesel Injector Removal Set 0XAT1562 1. Removing Delphi/Bosch diesel injectors 2. Using a slide hammer with 5/8” UNF thread 3. Suitable for Bosch/Delphi injectors as well as Mercedes-Benz CDI engine OM 611, 612,613…etc. 4. Hammer weight: 1.8kg

Injector Nozzle Puller - Mercedes CDI 0XAT1611 1. For Mercedes CDI engine OM 668 e.g. A-Class 2. Remove nozzles that are very tight 3. Fit in cylinder head 4. Without the cylinder head have to removed from the engine

129


Engine Tools VAG Injector Puller - TDi - PD 0XAT1700 1. For VAG models with TDi PD systems 2. Slide hammer with special PD puller 3. Supplied with Vice Clamp 4. Suitable for use with traditional injectors

Injector Nozzle Tool Set - Mercedrs CDI Engines (German Utility Model) 0XAT1703 1. For Mercedes CDI engines OM 611, 612, 613, etc. 2. The injector nozzle tool set: comprising nozzle puller,nozzle puller , milling cutter,compressed air adapter, threadtap and plastic case 3. Remove the injector nozzles correctly

VW & Audi Injector Removal Kit 0XAT1730 1. Removal and installation of high pressure petrol injectors 2. Use on direct injection VAG engines 3. Included for installation of the injector seals -important to ensure a good seal 4. Equivalent to OEM ref T10133 5. Includes double jaw puller,U shaped puller, slide hammer, tapered tool and sleeve,2 x seal adaptors and injector installer 6. Prevent damage to the injectors

Injector Remover/Installer & Service Tool Set - 18pcs 0XAT1730A 1. Injector remover/installer and service kit for petrol injectors found in VAG vehicles covering 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6 and 4.2L V8 FSI engines.Finish: PH Black 2. Finish: PH Black

Injector Removal Master Kit - VW & Audi 0XAT1731 1. As 0XAT1730 but with an additional four adaptors 2. AT1400 for quick extraction of diesel injectors 3. ďŹ tted to VW/Audi engines, mainly Pumpe Duse 4. Supplied in storage case 5. Applications: VW/Audi TDI FSI, VW/Audi,Seat, Skoda

130


Engine Tools Injector Pump Puller Kit- TDi PD 0XAT1732A 1. Injector pump puller set for VW/Audi diesel engines. 2. Manufactored from Chrome-Molybdenum Steelfor strength. 3. Contents: Slide Hammer, Direct Overhead Grip, Slide Hammer Hand Grip, Offset Adaptor, 22mm Adaptor, Hook Adaptor, 17mm Adaptor. 4. Applications: 1.4Di/TDi, 1.9D/SDi/TDi (PD), 4-valves 2.5TDi, 2.5TDi (PD), 2.8TDi (PD), 2.7/3.0TDi (PD).

VW/Audi Diesel Injector Remover 0XAT1734 1. Suitable for VAG TDI engines 2. Fix the injector 3. Pull out with hammer

Diesel Injector Removal Kit with Sliding Hammer - Delphi/Bosch 0XAT1736 1. Removing Delphi/Bosch diesel injectors 2. Can also use with an air tool 3. Loosen the injectors by vibration 4. Set of 3 adaptors plus a special tool

Diesel Injector Removal Set 4pc - Delphi/Bosch 0XAT1737 1. Removing Delphi/Bosch diesel injectors 2. Using a Slide Hammer with 5/8" UNF thread 3. Can use with an air tool 4. Loosen the injectors by vibration 5. Set of 3 adaptors plus a special tool

Injector Removal Tool Set - PSA 2.0 HDI 0XAT1756 1. Removing PSA HDI injection nozzles 2. Allows the removal of tightly fit injectors nozzles without removing the cylinder head 3. Set includes: - Pulling bridge that fits perfectly on PSA cylinder head - Special screw system, that allows a fast and easy nozzles removal - Blower to clean injectors seats 4. Engines:PSA 2.0 (110, 135 PS)HDI DW10 and DW12 engines 5. Models: Bosch injectors, Siemens injectors

131


Engine Tools Injector Removal and Dismantling Set 21 PC 0XAT1926 Universal tool kit for disassembling the injector and for preparing the removal of the injector. Contents: - Special bit insert hex 10mm:ø7.6 , ø6.6 - Pull Spindle: OT-M14×1.5, OT-M16×1.5, - IT-M16×1.0, IT-M17×1.0, IT-M20×1.0, - IT-M25×1.0, IT-M27×1.0, OT-M25×0.5, - OT-M25×0.75, OT-M27×1 - Universal joint:M18×1.5 - Special socket insert : 27mm ,28mm,29mm ,30mm hex - Injector gripper: 12mm, 13.5mm, 16mm, 26mm

Diesel Engine Injection Pump Removal & Sprocket Retainer - BMW M47,M57 0XAT1441 1. Removes the diesel pump and retains the pump sprocket in-situ so that the sprockets/timing chain configuration remains undisturbed, minimizing the level of engine disassembly 2. Applications: BMW-318 2.0 E46, 320 2.0 d/td E46, 330 3.0 E46, 525 3.0 E60/61,525 3.0 E39, 530 3.0 E39, 530 3.0 E60/61,535 3.0 E60/61, 730 3.0 E38, X5 3.0 E53

Common Rail Injector Inside Screw Removeal Tool Set 0XAT8703 Size: 1/2”Dr. Feature: To loosen and remove the injectors inside screw . Suitable for Bosch, Denso, Delphi, Siemens Injectors

Diesel Injector Socket Set 6pc 1/2"Drive 0XAT1033 1. Chrome Molybdenum, open-sided 2. 1/2" drive sockets for injector removal and installation 3. Size & Applications: - 110 x 22mm Audi/BMW/Mercedes/Rover/Seat/Vauxhall/ Volvo/VW - 80 x 27mm BMW/Fiat/Ford/Peugeot - 83 x 28mm VM 2.4D/2.5D Engined Alfa Romeo/Chrysler/ Land Rover - 80 x 22mm Nissan/VW - 90 x 21mm Ford Duratorq - 80 x 28mm LGV - Scania/Volvo

132


Engine Tools Diesel Injector Line Wrench Set 1/2"Drive 0XAT1018 1. Diesel injector socket wrench set in 1/2" drive 2. For dismantling injector lines on diesel engines 3. Fitted to BMW/VAG/Mercedes Benz 4. Sizes:12 / 14 / 16 / 17 / 18 / 19mm

Diesel Injector Socket 22mm 1/2" Drive 0XAT1310 1. Use on Nissan and Volkswagen 2. Outside diameter 32mm 3. Size: ½" Drive x 22mm x 78mm long 4. Bi-Hex format

Diesel Injector/ Lambda Socket Set 14pc 0XAT1598 1. A comprehensive range of specialist window sockets 2. For automotive applications including the installation , removal of lambda sensors and diesel injectors 3. Supplied in Single Hex and Bi Hex formats 17/19/21/22/27/28/30mm 4. Bi-Hex in various lengths: 20/22mm Single Hex 22mm x 50mm in axiel drive

33 Teeth Diesel Fuel Injection Socket - Benz 0XAT1755 1. A special ½" drive socket with 33 tooth 2. For removing and mounting the pressure valve holder on the injection pump 3. For Mercedes-Benz diesel passenger cars: 601, 602, 603, 605,606, 615, 616, 617

6 Piece Diesel Injector Seat Cutter Kit 0XAT1359 1. Clean/decarbonise injector seats 2. Centring Pilot: 7mm 3. Cleaner Sizes: 15mm flat cleaner for Universal applications; 17mm flat cleaner for BMW / PSA / Renault; 19mm angled cleaner for Fiat / Iveco 19mm flat cleaner for Mercedes CRD; 21mm angled cleaner for Fiat / Iveco

133


Engine Tools Diesel Injectors Seat Cutter & Face Cleaner Kit 0XAT1531 1. This tool you clean seat as well as injector seat 2. All process is made manually turning by hand 3. Apply little bit of pressure

Diesel Injector Seat Cleaner Set 8pc 0XAT1567 1. Cleaning place under injection washer after replacing injector 2. It is necessary to clean place under and above washer for perfect fit new or replaced diesel injector

9pcs Diesel Injector Seat Cutter Set 0XAT1569 1. Clean and re-cutting of injector seats on modern rail diesel engines 2. Includes 5 seat cutting reamers 3. For BOSCH, DELPHI and universal application 4. Along with a special angled reamer for IVECO / FIAT applications 5. Include 3 sizes of reamer chuck for 17, 19 and 21mm

Diesel Injector Seat Cleaner Set 6pc 0XAT1571 1. Set of four diesel injector seat cleaners, centring pilot and T-Handle 2. Use to clean/decarbonise injector seats 3. Centring Pilot: 7mm 4. Reamer Sizes & Applications: 15mm; Various Vehicles, 17mm; Delphi/Bosch(BMW, PSA, Ford), 17mm; Bosch (MercedesCRD), 17mm; Angled(Fiat, Iveco)

Diesel Injector Seat Cleaner Set 7pc 0XAT1572 1. Clean injector seats when changing or reconditioning diesel injectors 2. With centering pilot and T-Handle 3. Avoid blow-back due to poorly seated injectors 4. Cleaner Sizes: - 15mm flat cleaner for Universal applications - 17mm flat cleaner for BMW /PSA / Renault - 19mm angled cleaner for Fiat / Iveco - 19mm flat cleaner for Mercedes CRD - 21mm angled cleaner for Fiat / Iveco

134


Engine Tools Injector Seat Cleaning Set 0XAT1610 1. For 2.0 TDI engine from VAG group 2. Clean the contact surface between the injector and engine head when making the replacement. 3. Include cutter holder can made cutter straight and correct to attach 3. Insert the extension bar into the cutter for deep hole cleaning

5 Piece Diesel Injector Seat Cutter Kit 0XAT1697 1. Set of four diesel injector seat cleaners and centring pilot 2. Used to clean/decarbonise injector seats when changing injectors 3. Centring Pilot: 7mm 4. Reamer Sizes & Applications: 15mm; Various Vehicles, 17mm; Delphi/Bosch(BMW, PSA, Ford), 17mm; Bosch (MercedesCRD), 17mm; Angled(Fiat, Iveco)

Glow Plug Puller & Ream Kit with 3pc Glow/Spark Sockets 0XAT1257 1. Removal of stubborn glow plugs on Mercedes vehicles with melted electrodes 2. Enables extraction from plug aperture 3. Includes reamers 6mm & 7.5mm for decarbonising the glow plug aperture 4. 3pc of plug socket: 8 / 10 / 12mm

Mounting Bushings & Gauge Pump/ Nozzle 0XAT8705 1. Material: Brass 2. Feature: Professional alignment check and adjustment of P/D unit and installation of O-rings. 1) Damage-free installation of the O-rings 2) Precise positioning of the pump /nozzle unit 3. Applications: VW phaeton and Touareg from ’03, T5 from ‘04(5-cylinder and 10-cylinder diesel engines) Touraeg from ’04 and Audi A3 from ‘04(4cyl/4 valve diesel engines)

BMW Fuel Injector Install/Removal Tool (N20,N55) 0XAT4366 1. Special designed to install and remove injector in N20, and new N55 engine. 2. Applicable: BMW N20,N55. 3. OEM number: 130320.

135


Engine Tools BMW Fuel Injector Install & Remove Tool N55 0XAT1899 Special designed to install and remove injector from N55 engine. Applicable: BMW N55 engine

Injector Copper Sealing Ring Kit 150pc 0XAT1532 1. Have 15 different size combinations 2. Suitable for popular nozzle of injector system 3. Contents: 10pc of each following sizes 13.85x7.3x1.4mm; 14.6x7.5x1.3mm; 14.6x7.5x3mm; 15x7x2mm; 15x7.5x1mm;15x7.5x1.5mm; 15x7.5x2mm; 15x7.5x2.5mm; 15x17.5x3mm;15.5x7.5x2mm; 16x7.5x1.5mm; 16x7.5x1.7mm; 16x7.5x2mm;16.4x7.4x2mm; 20x9.4x0.9mm

7pc VW Extractor Set 0XAT1894 1. Injection Pump Extractor Tools Kit: Applicable for BMW M47, M47TU, M57, M57TU engines. 2. Benz-Guide Rail Pin Puller: Can remove even the most stubborn pins from the cylinder head, unlike the short slide hammer previously used to attempt this job 3. Puller For Injection Pumps Tool Kit: Applicable for BMW 4 cylinder diesel engine(M41), 6 cylinder diesel engine-2, 5(M51) also for Opel/Vauxhall Omega2, 5TD To loosen the injection pump pulley from the shaft when dismounting the Injection Pump

Noid Light Set 6pc 0XAT7028 Quick and easily test electronic fuel injection systems. 1. 6 noid lights for testing GM PFI, FORD TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI

Noid Light and IAC Signal Test Light Kit 11pc 0XAT7031 Quick and easily test electronic fuel injection systems. 1. 8 noid lights for testing GM PFI, FORD TBI, GEO TBI, BOSCH PFI, GM TBI, GM SCPI, GM MULTEC 2, BOSCH 2 2. Tow IAC signal test lights: One for GM1982 or newer GM TBI and PFI fuel injection system, and one for GM Model 1987 or newer GM Model 700 TBI and PFI fuel injection system. 3. One fiber optical Noid Lite extension included.

136


Engine Tools Diesel Injection Pump Remover & Sprocket Retainer - Land Rover / Rover 0XAT1388 1. Removes the diesel pump and retains the pump sprocket in-situ 2. Sprockets/timing chain configuration remains undisturbed, minimizing the level of engine disassembly 3. Applications: Land Rover; Freelander (Td4), Rover; 75 2.0D(M47R Engine)

Injection Pump Puller Kit - VW 2.8 TDI 0XAT1163 Suitable for Injection pump VW 2.8 TDI

Engine Injector Remover Kit - Kia/Hyundai 0XAT1212 1. Remove injector from Korean vehicles 2. Applications: - Hyundai: starex, lavita, matrix, trajet, terracan, santa fe(sm), libero, avante xd,grandeur xg getz, tucson, nf sonata,06’ accent. - Kia: carnival, rio, carens,cerato, optima, picanto,sorento, sportage, grand carniva

Water Pump Tools 0XAT1023 1. Adjusts timing belt tension on GM (Vauxhall/Opel) and Daewoo OHC engines 2. Rotating the water pump on eccentric mounting 3. Use with ½"ratchet 4. 0XAT1023-01 : 41mm 0XAT1023-02 : 46mm

Water Pump Holding Tool Vauxhall 0XAT1735 1. Removing and refitting the water pump 2. Without disturbing the Timing Chain on the 2.2 16v engine 3. Fitted to Astra-G, Vectra-B/C, Zafira-A, Signum and VX220 4. OEM Ref KM-J 43651

137


Engine Tools Volvo Strut Nut Socket Set 0XAT4202 1. Used for removing and installing the top shock retaining nut on S40, S60, S70, S80, S90 models. 2. Includes holding socket and double-D axle center socket.

Impact Bar 550mm 1/2"Sq Drive 0XAT8169 1. Designed for use nuts/bolts are not easily accessible 2. For air impact tools, or air is not available 3. Loosening crankshaft pulley bolts 4. Fit the required socket 5. Keeping the arm at a right angle to the shaft for maximum torque 6. Strike the top of the tool with a hammer to shock the nut or bolt loose 7. Features hand guard for extra safety

Fuel Pump Locking Tool - GM/ Renault/ Nissan 0XAT8706 1. Designed to lock the fuel pump and pulley in its timed position to allow pulley and or pump removal but in order to use it you may need to remove the belt. 2. Applications: Vauxhall/ Opel/ Renault and Nissan 3. Engine codes include: F8Q 600 1,9D, F8Q 606 , 1.9D, F9Q 760 1.9D CR, F9Q 762 1.9D CR, F9Q 770 1.9D, F9Q 772 1.9D CR, F9Q 774, 1.9D CR 4. GM/Vauxhall OEM KM-6239

Fan Clutch Wrench - Mercedes Benz 0XAT1091 1. Removes or installs the fan clutch hub on Mercedes-Benz vehicles 2. 65 mm wrench opening 3. Use with 0XAT1092 clutch holder

Fan Clutch Wrench - Mercedes Benz 0XAT1092 1. Designed 3 holes to hold the stud on fan clutch assembly found on Mercedes Benz vehicles 2. Allow release of lick out 3. Slim handle for tight space operation 4. Use with 0XAT1091 wrench

138


Engine Tools Viscous Fan Hub Spanner 0XAT1022 Sizes & Applications 0XAT1022-01 32mm Fitted to thermo-viscous fan hubs on BMW and Ford 0XAT1022-02 36mm Fitted to thermo-viscous fan hubs on Ford, Opel and GM 0XAT1022-03 41mm Fitted to water pump on OPEL and GM OHC-enginess 0XAT1022-04 46mm Fitted to water pump on OPEL and GM OHC-enginesser

Viscous Fan Holding Tool 0XAT1131 1. Prevents fan from rotating 2. Without risk of damaging fan (or fingers), when removing retaining nut

Ford Fan Clutch Wrench Set 2pcs 0XAT1155 1. Remove and replace the thermostatic fan 2. Assembly on most of Ford engines from 1984 to current 3. Use with 1/2" drive tools and torque wrench 4. Wrench Openings: - Long: 36mm (1.417") - Short: 58mm (2.283")

Viscous Fan Hub Spanner 32mm & 36mm 0XAT1580 1. Suitable for removing thermo-viscous fan hubs 2. Fitted to BMW, Ford and Vauxhall/Opel vehicles

Land Rover Viscous Fan Wrench 0XAT3401 1. Use both tools together to replace the cooling fan on Land Rover Discovery 3, Range Rover 3 and Range Rover Sport models 2. Extra long, thin design for easier working in confined spaces 3. Length: 650mm

Pneumatic Fan Clutch Wrench Set 8pcs 0XAT3400 1. Use both tools together to replace the cooling fan on Land Rover Discovery 3, Range Rover 3 and Range Rover Sport models 2. Extra long, thin design for easier working in confined spaces 3. Length: 650mm

139


Engine Tools Wrinkle Band Compressor 0XAT1020 1. Wrinkled spring steel compression band reduces surface contact ďŹ rction and prevents tool from slipping into the cylinder bore 2. Cam action compression allows one time setting of piston diameter enabling fast insertion of all piston assemblies 3. Depth: 37mm 4. Capacity: Ă&#x2DC;76-127mm

Cylinder Head Stands 0XAT1064 1. A pair of support stands which locate into cylinder head via stud holes 2. Provides the clearance between head and workbench required when reaming valve guides 3. Pin Diameter: 16mm

Professional Cylinder Head Service Kit 20pc 0XAT1005 1. Complete upper engine service kit 2. Enables in situ removal and replacement of valve springs and guides/bushings 3. Suitable for 8, 16 and 24 valve engines. 4. Set Includes: - Valve Stem Seal Replacement Kit (5, 6, 7, 8, 10, 11.5mm) - Rigid and Flexible Air/Cylinder Hoses - Universal Valve Spring Compressor - Valve Collet Replacement Tool - Straight Valve Stem Seal Pliers - Angled Valve Stem Seal Pliers

BMW Engine Cylinder Head Bolt Tool - TORX E12, 1/2" Drive 0XAT1089 1. Special TORX socket for cylinder head screws on late BMW 4-valve models 2. Applications: M42, M43, M44, M50, M52, M60,M62

Engine Cylinder Component Organizer 0XAT1489 1. A useful organizer for use when stripping engines 2. To ensure all component stay in the order 3. Accept camshafts, valves, springs and components related to the engine

140


Engine Tools Professional Cylinder Head Service Kit 0XAT1136 1. Complete upper engine service kit enables in suit removal and replacement of valve springs and guides/bushings. 2. Suitable for 8, 16 and 24 valve engines. 3. Supplied in carry-case.

Cylinder Head Leakage Tester 0XAT1175 1. Diagnose blown gaskets ,cracked blocks and cylinder heads easily and quickly 2. Checks for CO2 in cooling system and indicates its presence by test ďŹ&#x201A;uid colour change

Cylinder Head Socket Set 5pc 3/4"Drive 0XAT1593 1. Removing the cylinder head from engines 2. Impact quality, chrome-molybdenum steel 3. Contents: 0XAT1593-01 Star Socket E18 0XAT1593-02 Star Socket E20 0XAT1593-03 Star Socket E24 0XAT1593-04 12pt Socket 17mm 0XAT1593-05 12pt Socket 19mm

Hose Clamp Removal Tool Set 7pc 0XAT1062 1. Features heavy-duty construction with ratchet locking mechanism on most pliers 2. Contents: Remote Action Hose Clip Tool, Hose Removal Pliers Swivel Jaw Spring Wire Clip Pliers, Swivel Jaw Band Clip Pliers, Angled Band Clip Pliers, Flat Band Clip Pliers, Clic-RR Type Pliers

CLIC-R Collar Hose Clamp Pliers 0XAT1129 1. Releasing and reďŹ tting the new style CLIC & CLIC-R reusable hose clamp clips 2. Pliers are made from drop forged alloy steel with spring actuated joint, insulated handles 3. Length: 7"( 180mm)

141


Engine Tools Flexible Hose Clamp Pliers WW/Audi 2.0 TDI Engine 0XAT1108-01 1. Special Jaw design for VW/Audi 2.0 TDI engine lower water hose clamp 2. Max clamp capacity: 55 3. 630mm ďŹ&#x201A;exible shaft enables user to reach, remove and lock clamp into the open position

Flexible Hose Clamp Pliers - Truck 0XAT1108-02 1. For the removal and replacement of metal or plastic spring-loaded self-tightening hose clamps 2. Flexible long reach mechanism allows the pliers to release and lock hose clamps in the opened position 3. Fitted with 630mm long cable 4. For clamp diameters up to 65mm

CLIC-R Collar Flexible Hose Clamp Pliers 0XAT1108-04 1. Long reach tool designed to get to awkwardly positioned CLIC & CLIC-R tag type hose clips 2. Flexible cable and compact head help operation in conďŹ ned spaces 3. Features ratchet action and vinyl dipped handles

Flexible Hose Clamp Pliers 0XAT1109 1. For the removal and replacement of metal or plastic spring-loaded self-tightening hose clamps 2. Flexible long reach mechanism allows the pliers to release and lock hose clamps in the opened position 3. Fitted with 630mm long cable 4. For clamp diameters from 18mm to 50mm (approx)

Flexible Spring Hose Clip Crimper 3-in-1 0XAT1109A 1. 3-in-1 jaw operation of self-gripping spring band and spring hose clamps. 2. Flexible cable (550 mm) enables application in areas with restricted access where the application of usual hose clamp pliers is not possible. 3. Easy ratchet trigger mechanism on the handle makes it easy to apply right amount of pressure. 4. Capacity: 10~65mm

142


Engine Tools Holding Flexible Hose Clamp Pliers 0XAT2300 1. Ratchet mechanism with long reach holding flexible hose for professional technician or people for removal spring hose clamps. 2. Spinner holding flexible hose to help user on more accurate positioning and operation. 3. Capacity is 18 to 54 mm with 640 mm long hose 4. Applications are for VAG, Opel, GM, Ford, Mercedes, PSA, Renault, Toyota, etc.

Hose Clamp Pliers Angle Type Swivel Jaws 0XAT8143 1. Suitable for accessing reusable Clic/Clic-R type hose clamps in normally inaccessible positions 2. Can be used at any angle and with swivel head for most awkward angles

Clic Hose Clip Pliers 0XAT8144 1. Spring loaded pliers for fitting and removing Clic and Clic-R hose clips 2. Special jaws allow the change from fit to remove simply by turning the pliers over in your hand 3. PVC dipped handles for improved grip and comfort

Hose Clip Pliers - Standard Type 0XAT8146 1. Heavy-duty construction with non-slip handles for added comfort and grip 2. Special ‘V’ slot and cross slot jaws for installation and removal of tag and wire type hose clips 3. Pliers with ratchet locking mechanism for easy use on lower radiator hoses 4. Swivel jaws allow use where access is confined

Hose Clip Pliers - Straight 0XAT8147 1. Heavy-duty construction with non-slip handles for added comfort and grip 2. Special ‘V’ slot and cross slot jaws for installation and removal of tag and wire type hose clips 3. Pliers with ratchet locking mechanism for easy use on lower radiator hoses 4. Swivel jaws allow use where access is confined

143


Engine Tools Hose Clip Pliers - 45° Angled 0XAT8148 1. Heavy-duty construction with non-slip handles for added comfort and grip 2. Special ‘V’ slot and cross slot jaws for installation and removal of tag and wire type hose clips 3. Pliers with ratchet locking mechanism for easy use on lower radiator hoses 4. Swivel jaws allow use where access is confined

Heavy-Duty Large Hose Clamp Pliers 0XAT8149 1. Use on most of vehicles for the removal and installation of flat-type hose clamps 2. Features a fine-tooth locking ratchet to latch pliers in position 3. Large size is perfect for heavy-duty jobs

Hose Clip Pliers 0XAT8150 1. Suitable for removal of tag and wire type hose clips 2. Features ratchet locking mechanism for easy use on lower radiator hoses 3. Swivel jaws allow use where access is confined 4. PVC dipped handles for improved grip and comfort

Universal Hose Clamp Plier Set - Straight 0XAT8239 With interchangeable tips to cover all types of hose clamps

Universal Hose Clamp Plier Set - Angled 0XAT8240 With interchangeable tips to cover all types of hose clamps

Fuel Line Pliers VAG 0XAT1719 1. Specially introduced fuel line pliers use on three ended hose clips 2. Applications: Audi, Seat, Skoda and VW

144


Engine Tools Flexible Hose Clip Nut Driver 0XAT1168 1. 150mm Flexible shaft driver with 7mm socket 2. Comfortable, high-grip, textured handle 3. Overall length: 260mm 4. 0XAT1168-01 Size: 5mm 0XAT1168-02 Size: 6mm 0XAT1168-03 Size: 7mm

Flexible Hose Clip Nut Driver Set 4pc - 5, 6 & 7mm 0XAT1171 1. 150mm Flexible shaft driver with 5/6/7mm socket 2. Comfortable, high-grip, textured handle 3. Overall length: 260mm

Ling Reach Flexible Hose Clip Nut Driver Set 4pc - 5, 6 & 7mm 0XAT1173 1. 500mm Flexible shaft driver with 5/6/7mm socket 2. Comfortable, high-grip, textured handle 3. Overall length: 625mm

Screw Type Hose Clamp 0XAT8190 1. Smooth clamping adjusts minimize chance of damage to the hose 2. 0XAT8190-01 - Capacity: Ø27mm, Length: 65mm For air, coolant and fuel hoses to 27mm max diameter 3. 0XAT8190-02 - Capacity: Ø45mm, Length: 85mm For air, coolant and fuel hoses to 45mm max diameter

3-in-1 Flexible Spring Hose Clip Crimper - Manual Kit 4pcs 0XAT1109B - 1pc, 3-in-1 jaw hose clip crimper with ¼” socket. - 1pc, Flexible cable (240 mm) enables application in areas with restricted access where the application of usual hose clamp pliers is not possible. - 1pc, ¼” Square Driver for connecting with flexible cable or crimper head. - 1pc, Adapter of 1/4” Hex-Square for other hand drivers. - Capacity: 10~65mm - Warning: Not recommend to use power tool to drive it.

145


Engine Tools Extra-Long Hose Clamp 0XAT8139 1. Designed for clamping flexible hoses, features rounded clamp section to prevent damage to internal hose reinforcement. 2. Allows use in deep confined spaces and large adjusting knob enables easy operation. 3. Suitable for brake, coolant, fuel and vacuum hoses. 4. Max. Hose Diameter: 28mm 5. Length: 310mm

Multi-Direction Hose Clamp Plier 0XAT2301 - Wide application plier, available to work on radiator clamp, fuel line clamp and tank ventilation line clamp, and wheel bearing clip. - Special intersected slots design solves limited space problem. - 16mm-wide head more effectively grips hose clamp than general pliers with 9mm head. - Patent pending.

Ratched Hose Pinch-Off Pliers, 3pcs-Swivel Jaws 0XAT1075 1. 3 sizes of 8", 10" & 12" 2. Pinch off flow through vacuum, fuel, coolant lines, etc 3. Automatic ratchet mechanism holds pivoting jaws tightly in place 4. Heavy duty swivel jaws pivot to assure parallel pinching

Locking Hose Pinch-off Plier 0XAT1828 1. Eliminates the draining of cooling system when installing thermostats and water pumps on pressurized cooling systems. 2. Swivel jaws for level clamping. 3. Positive clamping for tight seals on large radiator and other hoses. 4. Length: 9 1/2"

Hose Pinch Tool Kit 2pc 0XAT2037 1. Alloy body with steel clamp arm. 2. Compact design allows use in confined spaces. 3. Rounded jaw edges prevent damage to internal hose reinforcement. 4. Suitable for use on fuel, vacuum and brake hoses.

Automatic Transmission Clutch Compressor (4 Pins) 0XAT4126 1. Capacity: Clutch diameter from 64mm to 175mm. 2. Adjustable legs fit most cars and trucks for replacement of transmission rear clutch piston snap ring.

146


Engine Tools Composite Hose Pinch Tools 0XAT1127 1. Manufactured from heat resistant nylon 2. Rounded jaw edges prevent damage to internal hose reinforcement 3. Features locking mechanism for simple one-handed use 4. Suitable for brake, coolant, fuel & vacuum hoses Item No. Description Size Capacity 1/4~3/4 0XAT1127-01 Small for Brake & Fuel Hoses 160 mm 0XAT1127-02 Medium for Heater Hoses 185 mm 1/4~1 3/4 255 mm 3/4~2 1/4 0XAT1127-03 Large for Radiator Hoses

Angled Composite Hose Pinch Tools 0XAT1127A 1. Manufactured from heat resistant nylon. 2. Rounded jaw edges prevent damage to internal hose reinforcement. 3. Features locking mechanism for simple one-handed use. 4. Suitable for brake, coolant, fuel & vacuum hoses. Item No. Description 0XAT1127A-01 Small for Brake & Fuel Hoses 0XAT1127A-02 Medium for Heater Hoses 0XAT1127A-03 Large for Radiator Hoses

Brake & Fuel Hose Pinch Tool 0XAT2039 1. Completely or partially seals flexible brake, fuel and vacuum lines. 2. Smooth rounded jaw edges prevent damage to internal hose reinforcement. 3. Quick and simple to use. 4. All steel construction with sliding lock collar.

Brake & Fuel Hose Pinch Tool 0XAT2040 1. Suitable for both brake and fuel lines. 2. Simple, yet effective, pinch action with rounded clamp section to prevent damage to hose lining. 3. Metal construction with chromed finish.

Alternator Tool Kit 6pc 0XAT7107 1. Permits easy removal of freewheel pulley from alternator either on or off the vehicle 2. Insert allows alternator shaft to be held while the pulley retainer is removed with the key nut 3. Contents: Spline Adaptors: 22mm x 33T Hex Adaptor: 22 x 28mm Socket Bits: 1/2"Sq Drive; M10 x 140mm, M10 x 100mm, H10 Drive; T50 x 65mm, M10 x 65mm

147


Engine Tools Alternator Tool Kit 13pc 0XAT7108 1. A comprehensive range of tools for removing alternators and free wheel pulleys on most vehicles 2. Set includes M10 Spline x ½"D, T50 Star x ½"D for Bosch Alternators, Hex 10mm/8mm, Spline M8/M10 and Star T40/T50 3. Also included ½"D to Hex Adaptor, 2 x pulley connectors and 2 further adaptors 4. Applications: Audi, BMW, Citroen, Ford, Mercedes, Peugeot, Porsche, Renault, Skoda, Vauxhall/Opel

Alternator Tool ½" Drive - M10 Spline 0XAT7109 1. Use on Bosch Alternators with free wheel pulleys 2. For use Audi, BMW, Ford, Skoda, Mercedes and VW 3. Ideal for dismantling and assembling the free wheel pulley whilst changing the alternator or pulley 4. The pulley shaft is held in place with the M10 spline bit on ½” drive socket whilst the nut is undone using the 33 teeth 5. Union Nut with 19mm spanner

Alternator Tool ½" Drive - T50 Star 0XAT7110 1. Ideal tool for assembling and dismantling the free wheel pulley whilst changing the alternator or pulley on Bosch alternators 2. The pulley shaft is held in place with the M10 spline bit on 1/2"drive socket whilst the nut is undone using the 33 teeth Union Nut with 19mm spanner

Alternator Tool Kit 22pc 0XAT7111 1. A comprehensive range of Combination Sockets required on the Free Wheel Pulley when removing or replacing the alternator 2. Includes tools for Bosch, Marelli and Valeo alternators and complete with new tools required for the latest Renault and Fiat alternators 3. Applications: Alfa Romeo, Audi, BMW, Citroen,Fiat, Mercedes, Mitsubishi, Renault, Seat, Skoda, Vauxhall/Opel, Volvo, VW

Alternator Tool Kit 18pc 0XAT7113 Contents: Combined Socket Bits: 1/2"Drive; Star - T50-33Tx113mm, Spline - M10-33T x113mm, Spline - M10-33Tx113mm Spline Adaptors: 15mmx33T, 22mmx33T Hex Adaptor: 22x28mm Round Adaptor: 35mm-4 pin Bits: 10mm Hex Drive; Star - T40/T50, Spline - M8/M10, Hex - H8/H10 Adaptor: 1/2"/Drivex10mm Hex

148


Engine Tools Piston Ring Pliers 0XAT1026 1. Installs and removes piston rings from 3/64" to 1/4" 2. Vinyl gripped handles with spring return mechanism

Piston Ring Groove Cleaner 0XAT1028 1. Fast and reliable removal of carbon 2. Glaze deposits from piston ring grooves 3. Suitable for pistons between Ă&#x2DC;51mm and Ă&#x2DC;127mm 4. With three 6-bladed cutters 5. Covering most popular piston groove sizes 6. Cutters: #1 - 1//16", 5/64", 3/32",1/8", 5/32", 3/16" #2 - 2.0, 2.5, 3.0, 4.0,4.5mm, 1/4" #3 - 1.2, 1.5, 1.8, 2.8,5.0, 5.5mm

Piston Ring Compressor 0XAT1161 1. With sprung steel wrap and ratchet action tension mechanism 2. Supplied with steel key 3. 0XAT1161-01 Capacity: 53-125mm, Depth:75mm(3") 0XAT1161-02 Capacity: 90-175mm, Depth:75mm(3") 0XAT1161-03 Capacity: 90-175mm, Depth:100mm(4") 0XAT1161-04 Capacity: 90-175mm, Depth:150mm(6")

Piston Ring Pliers 0XAT1197 1. Special steel, Nickel-plated 2. For removing and mounting piston rings 3. 0XAT1197-01 - Capacity: 50mm-100mm 0XAT1197-02 - Capacity: 80mm-120mm 0XAT1197-03 - Capacity: 110mm-160mm

Piston Ring Compressor Set 73mm - 117mm 0XAT1328 1. Enables the installation of piston rings ranging from 73mm to 117mm 2. Allows the user to compress the piston rings in small increments 3. Includes Ratchet Pliers,7 Bands: 73mm-80mm,80mm-86mm,86mm-93mm,93mm-99mm, 99mm-105mm,105mm-111mm,111mm-117mm

149


Engine Tools Piston Ring Service Tool Kit 0XAT1712 Contents: - Piston ring compressor w/ratchet key: Ø53-125mmx3"H / Ø90-175mmx3.5"H / Ø90-175mmx4"H - Piston ring plier capacity: 50-100mm. - Piston ring groove cleaning fits to 2"- 5"(51 to 127mm)includes blade 1/16" to 3/16";2.0mm to 4.5mm & 1/4";1.2mm to 5.5mm - Offset screwdrivers:♁Θ

Cylinder Head Guide Rail Pin Puller - BMW & Mercedes Benz 0XAT1568 1. Remove the most stubborn pins from cylinder head 2. Includes two interchangeable, threaded adapters (M8x1.25 and M6x1.00) 3. Use with the most common pin dimensions. 4. Applications: OEM Code M102, 110, 115,116, 117, 130, OM601,602, 603, 615,

Pulley Holding/Locking Tool 0XAT1029 1. Locking auxiliary drive belt pulleys as found on air conditioning pumps 2. Use in conjunction with spanner or ratchet wrench 3. Use to rotate camshaft pulleys for timing purposes and also for removing oil/fuel filters

Universal Pulley & Fan Clutch Holder Set 0XAT1080 1. Remove and install fan clutch and rotate or restrain the camshaft pulley 2. Adjustable jaw spread and interchangeable pins 3. Specifications: - Jaw Spread Range:40-220mm - Pin Sizes Ø:6, 8,10,16mm(2 of each)

Interchangeable Pulley Wrench Set 9pc 0XAT1454 1. Ideal tool set for tensioners or auxiliary/timing pulleys 2. Set includeds: 12, 13, 14, 15, 16, 17, 18, 19mm 3. Soft grip handles 4. Curved design for extra access.

Universal Belt Tensioner Wrench Set 0XAT1829 1. 13 sizes for v-belt and timing belt. 2. Double ended : 12, 13, 14, 15, 16, 17, 18, 19mm. 3. Single ended : E10, E12, E14, E16, E18.

150


Engine Tools Universal Belt Tensioner Wrench Set 0XAT1829A 1. Long wrench for easy handling 2. 12-pt 12-19 mm & E-Type E10 - E18 3. 12-pt. heads: 12, 13, 14, 15, 16, 17, 18 and 19 mm 4. E-Type heads: E10, E12, E14, E16, E18

Damper Pulley Puller Ring Wrench Set -5pc 0XAT8188 1. Hardened & tempered chrome vanadium steel with heat treatment. 2. Sizes: 13,15,16,17,19mm

Damper Pulley Puller Open Wrench Set -5pc 0XAT8189 1. Hardened & tempered chrome vanadium steel with heat treatment. 2. Sizes: 13,15,16,17,19mm

Ribbed Crankshaft / Auxiliary Pulley Remove 0XAT1462 1. For removal of stubborn or seized ribbed crankshaft and auxiliary pulleys 2. Without the risk of damage 3. For most vehicles 4. Low proďŹ le arms allow use in restricted engine bays 5. Maximum Leg Spread: 165mm

Camshaft Pulley Removal Tool 0XAT1484 1. For removal of camshaft pulleys 2. Legs fasten through holes in camshaft pulley for fast and sure removal 3. Without damage to the pulley 4. Adjustable legs 5. Allow use on various sizes of pulley 6. Minimum/Maximum Spread:22-43mm 7. Leg Diameter: 20mm

151


Engine Tools Timing Pulley Puller 0XAT1485 1. Draws pulleys by the holes without causing damage 2. Moving legs adapt to diďŹ&#x20AC;ering pulley diameters 3. Special compact design for use with engine in situated

Timing Pulley Puller 0XAT1517 Puller for camshaft pulley

V-Belt Pulley Wheel Removal Set 0XAT1067 1. Expert v belt pulley wheel removal set expert quality 2. For the removal of v belt pulley wheels 3. Sculpted grooves on face of puller 4. Allow the legs to lock on to outer circumference of the v belt for easy removal. 5. Contents: - Small straight leg puller: max.reach 20mm; max spread 110mm - Large straight leg puller: max. reach 35mm; max spread 200mm - 2 cranked puller legs(can be used with either yoke)

Pulley Remover & Installer Set 0XAT4003 1. Complete with puller body, jaw and sleeve assembly, jack-screw, button, bearing, thrust washer. 2. Remove and install pressed-on alternator and power steering pump pulleys on GM, Ford,Chrysler, AMC engines 3. Fits Pulley shafts of 1-1/8",1-1/4", 1-3/8", 1-5/8"

Harmonic Balance Puller Set 0XAT4033 1. Multi-purpose puller set for extracting ďŹ&#x201A;ywheels and pulleys. 2. Contents: Yoke, 130mm Thrust Bolt, Centring Adaptors; Small,Large, Flat, Bolts; 1/4" x 28 x 2-12" x 2pc, 5/16" x 18 x 3-1/2 x 2pc, 5/16" x 18 x 5-1/2" x 2pc, 3/8" x 16 x 2" x 3pc, 3/8" x 16 x 3" x 2pc, 3/8" x 16 x 4-1/2" x 5pc, 3/8" x 24 x 1-1/2 x 3pc, M8 x 1.25 x 45mm x 3pc, M8 x 1.25 x 65mm x 2pc, M8 x 1.25 x 90mm x 3pc, M10 x 1.5 x 35mm x 3pc, 3. Washers; 8mmID x 6pc,10mmID x 4pc, 12mmID x 4pc

152


Engine Tools Harmonic Balancer Puller Kit 0XAT4049 1. Eases the removal of the harmonic damper pulleys 2. Found on many Chrysler, Ford, GM, Hyundai, Mazda and Mitsubishi engines 3. Eliminates the need of a technician to go through the time consuming process of first removing the radiator before being able to remove the pulley 4. Low profile puller 5. Entire puller set comes packed in a handy blow molded case for ease of storage

Harmonic Balancer Remover Set 14pc 0XAT4070 Contents: - Screwdriver 3/8"x16NCx4"x2pc - Screwdriver 5/16"x18NCx2"x3pc - Screwdriver 3/8"x24x2"x3pc - Screwdriver 10mmx1.5x3"x2pc - Small pointed tip - Flat tip - Long center bolt - Yoke

Master Bolt Grip Set 0XAT4071 1. Works on harmonic balancers, steering wheels, cranks haft pullers, and gears. 2. Capable of handling two or three- way bolt pull possible on almost every car, pickup,SUV, and small engine. 3. Contents: - Two/Three Way Yoke - 4pc Tips - Metric Bolt Set - SAE Bolt Set - 2pc Center Screw for Puller

Steering Wheel & Harmonic Balancer Puller Set 18pc 0XAT4058 1. Steering whe el yoke manu factured from drop-forged carbon steel. 2. Fits Vauxhall/Ope l, Ford and Chr ysler vehicles. 3. Suitable as two or three-way puller for remov al of pulleys and flywh eels from sma ll engines. 4. The larger ductile steel yoke is suitable for pulling harmoni cbalancers, timing gears and other parts with bolt circle diamet ers 5. Contents: Yoke, Thrust Bolt, Screw 5/16"x 24 x 3" x 2pc, Screw 3/8" x 16NC x 3" x 2pc, Screw 5/16" x 18NC x 3-1/2" x 2pc, Harmonic Balancer 6. Application: Yoke, Thrust Bolt, Adaptor, Screw 3/8" x 3" x 24 x 3pc, Screw 3/8" x 3" x 16 x 3pc

153


Engine Tools Steering Wheel / Pulley / Flywheel Puller 0XAT4082 1. Removes steering wheels on most American and Japanes vehicles. 2. With or without telescoping steering columns. 3. Also works as a regular2/3-way puller to remove pulleys and small engine flywheels.

Power Steering Pump/Alternator Puller Remover 0XAT4138 1. Removes power steering pulleys on most Ford, Chrysler, VW,and GM vehicles with Saginaw, Thompson and Ford C2 and C111 power steering. 2. It works on pulleys with hub diameters of 1-1/8",1-1/4", 1-5/16" & 1-3/8".

Crankshaft Drive Belt Pulley Puller Set 0XAT8049 Special universal puller with 132mm spread for removing crankshaft drive belt pulleys with and without bolt holes on European vehicles. 1 beam-working range 132mm 1 beam-working range 132-195mm 1 pair of pulling legs-length 68mm 1 pair of extensions-length 88mm 1 spindle with exchangeable pressure pad 1 pressure pad 12mm 1 pressure pad 37mm 2 pairs of screws for the attachment of pulling legs and/or belt pulleys with boltholes

Universl Pulley Extractor 0XAT1167 To loosen the injection pump pulley from the shaft.

Pulley-Extractor and Reaction Tool with Sliding Hammer 0XAT1180 1. Applications: VW-Audi, Seat, Skoda, Opel/Vauxhall Ford, BMW, Mercedes, Peugeot, Citroën, Renault, Fiat and Japanese vehicles, etc. 2. Contents: 1 - Puller Plate 3 - Hook Ø 20 mm 3 - Hook Ø 26 mm 3 - Shoulder Nut M10 1 - Pressure-Unit 1- Hammer (L: 495mm)

154


Engine Tools Pulley-Extractor and Reaction Tool 0XAT1181 1. Loosen the retaining bolt and extract the Pulley 2. For Pulleys with holes with a PCD from Ø70mm-Ø100mm 3. Also suitable for hole from minimum Ø20mm 4. Lock the Pulley while loosening or tightening the retaining bolt 5. Preventing the Pulley from rotating during extraction 6. Application: VW-Audi, Seat, Skoda, Opel/Vauxhall,Ford, BMW, Mercedes, Peugeot,Citroën, Renault, Fiat,Japanese vehicles, etc. 7. Contents: 1 - Puller Plate 3 - Hook Ø20m 3 - Hook Ø26mm 3 - Shoulder Nut M10 1 - Pressure-Unit

Pulley-Extractor and Reaction Tool 0XAT1183 1. As AT1181 but with two 26mm hooks and two hexagon nuts 2. Applications: VW-Audi, Seat, Skoda, Opel/Vauxhall Ford, BMW, Mercedes, Peugeot, Citroën, Renault, Fiat and Japanese vehicles, etc. 3. Contents: 1 - puller plate 2 - hook diameter 26 mm 2 - shoulder nut M10 1 - pressure-unit

Camshaft Pulley Removal / Installer Kit 0XAT1470 1. Hold the camshaft pulley stationary while loosening and tightening center shaft bolt 2. Use the centered screw rod to uproot the pulley 3. Locking screw:M8, M10 4. Fixed distance:54~120mm

Power Steering Pump Pulley Set 0XAT4098 1. A complete set of tools required to remove and install power steering pump pulleys of most American vehicles. 2. Fits pulley hubs with diameters of 1-1/8".1-1/4".1-5/16" and 1-3/8". 3. Includes the necssary adapters for servicing GM.Ford engines.

Crankshaft Seal Installation Tool VAG 1.4 1.6 16V 0XAT1352A - For Volkswagen and Audi Group models 16V 1.4/1.6 engines - OEM Code:T10017 - Applications:VAG 1.4/1.6 16v engines - Use on Fiat engines

155


Engine Tools Ford Rear Main Oil Seal Kit 0XAT4200 1. Works on 1994 - 2003 7.3 diesel engine in Ford 3/4- and 1-ton trucks 2. Need to properly remove and install the rear main oil seal and wear ring on the crank shaft 3. Eliminates makeshift methods of seal removal and installation that could damage new seal or crankshaft

Engine Seal Two Ways Puller 0XAT8704 - Finish: Black finish - Size: 200mm L - Feature: for taking out the seal from engine

Puller for Sealing Ring 0XAT1240 1. Use on sealing rings with internal diameter 4 - 16 mm, e.g. injector nozzle sealing rings on Mercedes CDI engines 2. The puller extracts the sealing rings correctly, for example from between the injector nozzle and the cylinder head 3. Pull out the sealing ring, screw the taper point of the tool into it, then remove with the impact-type puller

Oxygen Sensor Wrench with Flexi - Handle 22mm 0XAT1387 1. Has a swivel head action 2. Double ended with both single and bi-hex profile 3. Giving greater flexibilty on Lambda sensors

Offset Oxygen Sensor Wrench with Flexi-Handle 22mm 0XAT1404 1. Flexibly mounted handle with off-set grip for maximum access 2. Suitable for heated and unheated oxygen sensors 3. Cut-out section allows socket to pass over wiring

Sensor Socket Set 7pc 3/8” Drive 0XAT1061 Contents: 29mm Presure / Vacuum Switch Socket 7/8” Vacuum Switch Socket 27 mm Oil Pressure Sending Unit Socket 7/8” Vacuum Switch Socket 1-1/16” & 1” Oil Pressure Sending Unit Socket Long Oxygen Sensor Socket Short OXygen Sensor Socket

156


Engine Tools Diesel Injector Puller - Mercedes Cdi 0XAT1302 1. For removal of stubborn diesel injectors 2. Fitted on Mercedes CDI engines 3. Features injector cap removalsocket, security hex key 4. Including an inner part of injector and a puller to remove the injector without damaging the cam cover 5. Fitted to C-Class,E-Class and Sprinter vehicles

Deep Oxygen Sensor Socket 0XAT1304 1. Hardened & tempered steel socket. 2. Black oxided finish. 3. 1/2" double-square, 7/8"hex.

Oxygen Sensor Socket 0XAT1305 1. Hardened & tempered steel socket. 2. Black oxided finish. 3. 3/8" drive, 7/8"hex.

Oxygen Sensor Socket 22mm, 3/8"Drive 0XAT1306 1. Allows the wires to sensors and bypassed 2. Application: Mitsubishi, Nissan, General Motors & Volkswagen Audi Group 3. Size: 3/8" Drive x22mm x 90mm long 4. For heated and non-heated Lambda Sensors

Extra-Long Oxygen Sensor Socket - 22mm, 1/2" Drive 0XAT1308 1. For deep-seated and longer type oxygen sensors found on modern vehicles 2. Enables socket fitted over wiring harness 3. Size: ½"x 22mm x150mm long

Injector Cap Removal Socket Set 4pc 0XAT1367 - Removes the top cap and connectors on diesel fuel injectors - Prior to injector removal. - Deep socket and wide cut-out configuration are essential for this application. - Fits popular injectors found in modern vehicles - Injector Applications:Bosch, Delphi, Siemens,Denso - Sizes: 25, 27, 29, 30mm

157


Engine Tools Sensor Socket Master Set 11pc 0XAT1383 1. Suitable for Titania and Zirconia oxygen sensors found on most modern vehicles. 2. Windows and slots enable sockets to be fitted over wiring harness.

Reamer Set For ABS Sensors - 5Pcs 0XAT2073 1. T-Bar Handle in 1/4" D and 4 popular sized reamers. 2. Made from Chrome Vanadium and HSS steel. 3. Reamer sizes: 23mm long: 14mm | 15mm | 18mm and 18mm x 34mm long. 4. Applications: Volkswagen / Audi / Fiat / Skoda / BMW E36 & 46 / Mercedes-Benz A class / Mazda / Toyota / Ford.

Oxygen Sensor Port Thread Chaser - M18 x 1.5mm 0XAT1189 1. T-Bar Handle in 1/4" D and 4 popular sized reamers. 2. Made from Chrome Vanadium and HSS steel. 3. Reamer sizes: 23mm long: 14mm | 15mm | 18mm and 18mm x 34mm long. 4. Applications: Volkswagen / Audi / Fiat / Skoda / BMW E36 & 46 / Mercedes-Benz A class / Mazda / Toyota / Ford.

Oxygen Sensor Port Thread Chaser - M12 x 1.25mm 0XAT1190 1. Cleaning and repairing damaged threads on the exhaust oxygen sensor port 2. With a spark plug socket (21mm)

Oxygen Sensor & Thread Chaser Kit 5pc 0XAT1628 1. For oxygen sensors found on modern vehicles 2. Contents: - 1/2"Dr. 22mm x 78mmL Oxygen Sensor Socket - 1/2"Dr. 22mm x 150mmL Oxygen Sensor Socket - 1/2"Dr. 22mm x 50mmH Offset Oxygen Sensor Socket - 3/8”Dr. 22mm x 30mmH Offset Oxygen Sensor Socket - M18x1.5mm Thread Chaser

158


Engine Tools Oxygen Sensor & Thread Chaser Set 5pc 0XAT1629 1. For oxygen sensors found on modern vehicles 2. For cleaning and repairing damaged threads 3. Sockets: Straight 80mm Deep; 3/8"Sq Drive,22mm, Offset 31mm High;3/8"Sq Drive, 22mm, Offset 50mm High;3/8” Sq Drive Octagon Drive, 22mm Thread Chasers:M12 x 1.25mm, M18 x 1.5mm

Thread Repair kit for Lambda Sensors - M12 x 1.5mm 0XAT1723 1. Repair of threads in the cylinder head 2. For new thread inserts 3. New insert will remain in-situ even if Lambda Sensors is subsequently removed 4. Includes five replacement inserts and three cutters

Thread Repair kit for Lambda Sensors - M18 x 1.5mm 0XAT1724 1. Unique and wide assortment for thread damaged or worn off thread repairing 2. Ideal lamda sensor threads 3. Includes threaded tap and assembly tool 4. Fast repair possibility without costly replacement of bearing housings and components

Spark Plug Puller Set 4pc - VAG 0XAT1401 1. Installation/removal of ignition coils on VAG vehicles 2. Long shafts with composite T-style handle for added control and stability 3. Prevents damage to ignition coils whilst 4. Allowing faster removal

Spark Plug Boot Puller 0XAT1693 1. Safely remove spark plug boots with the engine running 2. A flexible shaft makes it easy to reach the spark plug boot 3. Avoid engine burns

Spark Plug Installation/Removal Tool 0XAT1694 1. Fits onto common sizes of spark plugs 2. Reduces possible cross threading on deep-seated engine applications 3. Remove spark plugs once loose 4. Flexible rubber shaft allows access in confined spaces

159


Engine Tools Quick Plug Cap Puller for Ford Triton engines (M 16mm x 1.5mm) 0XAT1077 - Good for Ford-Zero Degree cap style spark plug (16mm x 1.5mm) which is popular for FORD-3 Valve Triton Engine. - Which spark plugs are like HT0, HT15, SP-515, etc. Please notice this tool is only for extracting the cap when it is left in engine, not suitable if the porcelain electrode broken off.

Long Reach Spark Plug Socket - 250mm L 0XAT1193 1. Use with deep-seated spark plugs 2. 0XAT1193-01 Socket size: 3/8" Dr. x 14mm x 12PT x 250mm L, magnet inside 0XAT1193-02 Socket size: 3/8" Dr. x 16mm x 12PT x 250mm L, magnet inside

T-Handle Universal Spark Plug Socket 0XAT1066 1. Universal joint, spark plug sockets with built-in extension bar 2. Chrome Vanadium steel with satin finish 3. With deep-set spark plugs 4. Length: 450mm 5. 0XAT1066-01 Socket Size: 14mm ; Spark Plug Size: 8mm 0XAT1066-02 Socket Size: 16mm ; Spark Plug Size: 10mm 0XAT1066-03 Socket Size: 18mm ; Spark Plug Size: 12mm 0XAT1066-04 Socket Size: 21mm ; Spark Plug Size: 14mm

Magnetic Spark Plug Socket 0XAT1147 1. Forged Chrome Vanadium steel,hardened, tempered and chrome plated 2. 0XAT1147-01 Size: 3/8" Drive x 16mm 0XAT1147-02 Size: 3/8" Drive x 21mm 0XAT1147-03 Size: 1/2" DR. x 16mm 0XAT1147-04 Size: 1/2" DR. X 21mm

T-Handle Speed Universal Spark Plug Socket 0XAT1277 1. High quality Chrome Vanadium steel T-handle spark plug socket 2. Access to deeply recessed spark plugs 3. Outer sleeve rotates freely to enable speed action 4. Combination rigid/flexi head socket aids where access is restricted 5. 0XAT1277-01 Socket Size: 16mm; Spark Plug Size: 10mm 0XAT1277-02 Socket Size: 19mm; Spark Plug Size: 12mm 0XAT1277-03 Socket Size: 21mm; Spark Plug Size: 14mm

160


Engine Tools Torque Spark Plug Socke t Set 8pc 3/8"Drive 0XAT1278 Contents: 3pc - 3/8"DR.Torque Spark Plug Socket: 14mm(19Nm), 16mm(20Nm) and 21mm(25Nm) 2pc - 3/8"DR. Wobble Extension Bar:150mm & 250mm 1pc - Sliding T-Bar 1pc - 3/8"DR. Universal Joint 1pc - 1/2"DR. (F) x 3/8"DR.(M) Adaptor

Torque Limited Adapter Set 3/8" Drive 0XAT1280 1. This tool prevents over-tightening of spark plugs and glow plugs and ensures garages are protected from hefty claims from customers at one end and refused warranty by the plug maker at the other 2. Use in conjunction with your own plug sockets 3. 0XAT1280-01 : 3pcs set Torque Ratings:10, 15, 25Nm 0XAT1280-02 : 4pcs set Torque Ratings:10, 15, 25 & 35Nm

Torque Glow Plug Socke t Set 8pc 3/8"Drive 0XAT1281 1. Chrome Vanadium steel, 12-point sockets, with plug retaining insert 2. Prevent over-tightening of glow plug and resulting cylinder head damage. 3. Transmits full torque in reverse for rapid plug removal 4. Supplied in storage case 5. Torque Limits: 15, 18, 18Nm 6. Socket Sizes: 8, 10, 12mm

Spark Plug Socket 3/8"Drive 8mm Thin Wall 0XAT1623 1. Thin walled Spark Plug socket with a spring clip to hold the plug 2. Used on most Citroen vehicles 3. Fitted with 8mm Bosch spark plugs such as BMW E90335I N54 engine 2006, BMW Mini, Mercedes M156 engine, Peugeot 207 and 307, Renault 1.2 16v

Spark Plug Wire Tester 0XAT1121 1. Identifies damaged spark plus wires easily 2. Tester flashes in sync with spark plug firing unit 3. Runs across a break in the wire

161


Engine Tools Spark Plug Boot Puller Tongs 0XAT1141 1. Designed for removal/installation of spark plug boot 2. Reduces risk of electric shock or burns when checking installation of plug leads whilst running engine

In-Line Ignition Spark Tester 0XAT1142 1. Tests HT supply to spark plug 2. For all spark ignition engines 3. Quick and simple fault diagnosis

Insulated Spark Plug Booth Pliers 0XAT1182-01

- 45° Angled

0XAT1182-02

- Straight

1. Allows safe removal of spark plug boot 2. Without pulling the leads from their clips 3. Prevent electric shock when working on operating ignition system 4. Vinyl dipped handles and jaws 5. Length: 250mm (10")

Spark Plug Pliers - 300mm 0XAT1244 1. Suitable for removal of spark plug boot on deep-seated engine applications 2. Provide insulation from HT shock 3. Give added comfort and control

Spark Plug Lead Tool - VAG 0XAT1292 1. Separates the HT leads from deep-seated spark plugs 2. Fitted to VAG vehicles 3. For spark plug removal 4. Overall length: 290mm

Reverse Action Spark Plug Thread Chaser 0XAT1594 1. For chasing spark plug threads from inside the cylinder head and working outward 2. Uses better threads at the base of the spark plug port 3. Reduces the chance of debris from falling into the cylinder 4. 0XAT1594-01 Size: 12mm x 260mm long 0XAT1594-02 Size: 14mm x 260mm long

162


Engine Tools Spark Plug Thread Chaser 0XAT1191 14 & 18mm 0XAT1192

10 & 12mm

1. Suitable for removal of spark plug boot on deep-seated engine applications 2. Provide insulation from HT shock 3. Give added comfort and control

Internal (Thread Chaser) Spark Plug Re -thread Tool Kit 7pc 0XAT1595 1. Repair damaged, deep-seated spark plug threads on modern engines 2. Allows the tool passed through the plug thread into the combustion chamber 3. Expanded to the correct size starting on the inner, undamaged threads 4. Traditional thread restorers rely on luck for restored and undamaged threads to align 5. Contents: - 12mm Internal Spark Plug Rethread Tool - 14mm Internal Spark Plug Rethread Tool - 18mm Spark Plug Rethread Tool - 8mm Internal Spark Plug Rethread Tool - 10mm Internal Spark Plug Rethread Tool

Spark Plug Thread Repair Kit - M14 x 1.25 0XAT1111 1. Repairing stripped or damaged threads on spark plug seat 2. Includes: Tap M14x1.25;Set-tap M14x1.25/M15.8x1.25; Wrench(ID: 3/8"); T-bar 3/8"D; Insert driver (ID:3/8");Seat cutter; Hex key 2.5mm;Inserts (L: 9.4/15mm)

14mm Spark Plug Rethreader Kit 16pc 0XAT1405 1. Designed for the repair of spark plug threads 2. With the Spark plug tap/reamer and inserts 3. Includes: 1 - Tap and Reamer 5 - Insert M14x1.25x11mm 5 - Insert M14x1.25x16mm 5 - Insert M14x1.25x19mm

163


Engine Tools Spark Plug Rethreader Kit 0XAT1406

8mm

0XAT1407

10mm

0XAT1408

12mm

0XAT1409

14mm

1. Repair damaged 8mm / 10mm / 12mm / 14mm spark plug threads 2. Opening hole with a reamer/tap and screwing insert onto the spark plug 3. Use spark plug socket to install spark plug and insert 4. Remove plug and check insert is properly seated 5. Set includes: 2 - Inserts M8x1.25x19mm(1.2T) 2 - Inserts M8x1.25x19mm(0.7T) 2 - Inserts M8x1.25x12mm(1.2T) 2 - Inserts M8x1.25x12mm(0.7T) 1 - Thread chaser 0XAT1406 : M8x1.25 0XAT1407 : M10x1.25 0XAT1408 : M12x1.25 0XAT1409 : M14x1.25

Spark Plug Thread Repair kit - M14 x 1.25mm 0XAT1727 1. Repair of threads in the cylinder head 2. New insert will remain in-situ even if spark plug is subsequently removed 3. Includes replacement inserts 5pc of each: M14x1.25x12mmL M14x1.25x17.5mmL three cutters and assembly tool

Torque Wrench-Short Handle, 5-50 Nm 0XSW4025 - Wide range of torque satisfying almost spark plug installation from market. - Short handle design for spark plug installation when narrow space - Wide range for variety applications. - Clear Window with scales for easy reading - Specification: 3/8” Drive / Overall Length= 305mm / Capability= 5~50Nm Accuracy= ± 4% (Can be customized ± 2%) - Applications: NGK, DENSO, BOSCH, FORD-Motorcraft, etc. - Warning: To avoid damage of threads, please follow each engine instruction manual for spark plug installation.

Glow Plug Socket Set 3pcs 0XAT1051 1. These sockets have a universal joint for easy replacement and removal of all popular glow plugs. 2. Hardened & tempered chrome vanadium steel. 3. Length:72mm 4. Sizes:8mm,10mm,12mm

164


Engine Tools Glow Plug Ratchet Spanner 0XAT1311 1. Double-end, 12-point, reversible, oďŹ&#x20AC;set, ratchet ring spanner 2. For removal/installation of glow plug bus bar and glow plug units. 3. Overall length: 300mm 4. 0XAT1311-01 8mm x 10mm 0XAT1311-02 8mm x 12mm

Glow Plug Connector Pliers 0XAT1456 Straight 0XAT1457

Angled

1. For removal of hard to reach glow plug connectors 2. Found on latest generation of engines 3. Composite handles provide added comfort and control 4. Overall length: 0XAT1456 : 245mm 0XAT1457 : 235mm

Glow Plug Puller & Ream Kit with 6pc Glow / Spark Sockets 3/8â&#x20AC;? Drive 0XAT1132 1. Suitable for removal of stubborn glow plugs on Mercedes vehicles with melted electrodes 2. Enables successful extraction from plug aperture 3. Set includes reamers 6mm & 7.5mm for decarbonising the glow plug aperture and 6pc of plug socket 8 / 9 / 10 / 12 / 14 /16mm

Extra-Long Glow/Spark Plug Socket Set 6pc 3/8" Drive 0XAT1157 1. Forged Chrome Vanadium steel deep universal glow/spark plug sockets 2. Rubber socket insert grips ceramic insulation and assists in extraction of plug 3. Overall Length: 150mm 4. Sizes: 8, 9, 10, 12, 14, 16mm

Glow/Spark Plug Socket Set 6pc - 3/8" Drive 0XAT1172 1. Forged Chrome Vanadium steel deep universal glow/spark plug sockets 2. Rubber socket insert grips ceramic insulation and assists in extraction of plug 3. Overall Length: 150mm 4. Sizes:8, 9, 10, 12, 14, 16mm

165


Engine Tools Diesel Injection Pump Wrench Bi -Hex 13mm 0XAT1226 1. Use on: Audi / Alfa Romeo / Citroën / Chrysler /Ford / Fiat / Nissan / Peugeot / Rover / Renault / Seat /Vauxhall/ Opel / Volkswagen and Volvo 2. For removal of glow plug 3. 90 degree angle for leverage

Glow Plug Socket Set 3pc 0XAT1480 1. Specially designed for gaining access to the glow plug when the cable restricts access. 2. Lateral slot for access. 3. Hardened & tempered drop-forged CR-V. 4. Sizes: 8mm / 9mm / 10mm 5. Applications: Alfa Romeo: 147 / 156 / 159 / GT / Spider / Brera Fiat: Bravo / Stilo GM: Astra / Signum / Vectra-C Zafira / Saab 93/95

Diesel Glow Plug Socket Set 4pc 3/8"Drive 0XAT1521 1. Popular glow plug sized Chrome Vanadium steel sockets 2. With universal joints for replacement 3. Features rubber inserts for retention of plug in socket 4. Includes 75mm extension bar 5. Contents: - Sockets; 8, 10, 12mm, - Extension Bar 75mm

Glow Plug Puller & Reamer Set 3pc 0XAT1426 1. Removal of stubborn glow plugs on Mercedes vehicles with melted electrodes 2. Enables extraction from plug aperture 3. Includes reamers for decarbonising the glow plug aperture after removal 4. Reamer Dimensions: - 6mm Reamer x 10mm Thread x 103mm from - 7.5mm Reamer x 12mm Thread x 95mm

PSG Glow Plug Socket with 5 PSG Protection Caps 0XAT8701 - The PSG-Glow plugs with pressure sensor should be mounted with protecting cap in order to save the plug-in connection of the PSG-Glow plugs from pollution and electrostatic charging. - Size: 1/4”Dr.x12mm - Suitable for Audi, Volkswagen and Opel (eg. Dür PSG glow plugs with OE no. GM 55564163/55577419, Opel 18 26 354/12 14 061, VW 03L905 061 D)

166


Engine Tools Master Glow Plug Tool Set - Mercedes CDI engines 0XAT1704 1. For Mercedes CDI engines OM 611, 612 and 613 2. Enables removal of burnt and/or stuck due to corrosion or torn off glow plugs as well as the repair of glow plug retaining thread 3. The cylinder head need not to removed

Glow Plug Puller Kit 7pcs 0XAT1728 1. Manufactured from S45C carbon steel and SUS303 for strength. 2. Contents: - External Grip (7.7mm internal), includes size 4 (6.0mm) contraction collect. - External Grip (6.8mm internal), includes size 3 (5.0mm) contraction collect. - 3pc of Contraction Collect, sizes: 3 (5.0mm); 2 (3.6mm); 1 (2.7mm). 3. T-Bar Slide Hammer / Puller 4. Internal (Expansion Collect) Puller

Glow Plug Reamer Set 3pc 0XAT1418 1. Use when fitting new or refitting original glow plugs 2. The Reamer Set has M10 and M12 (two lengths) 3. It is a Chrome Molybdenum Titanium coated 4. Suitable for removing engine carbon deposits

Injector Seal Removal Tool 0XAT1267 1. Remove the copper injector seal when it stuck into the head 2. Allow seals with 7.5-10mm internal diameter to be removed 3. Drop the tool into the hole left by injector, tighten the handle and lift out the seal

Glow Plug Drilling Kit 9pc 0XAT1422 Contents: 1 - Cone Center Tool; Spindle 12mm hex, Nut 30mm hex 1 - Drill installer 2 - Bolt 1/4”-28 UNF; 9mm hex 2 - Ø6×3.5×40mmL 1 - 3mm alley key 1 - 9.7mm square socket 2 - Drill 7×5.5mm & 9×5.5mm 1 - Ratchet Driver, T-handle 2 - Ø3.5mm Drill 3 - Tap M10×P10; M8×1.0;1/4”-28UNF

167


Engine Tools Damaged Glow Plug Removal & Cleaning Set 0XAT1472 1. Remove damaged/broken glow plugs from cylinder heads 2. For glow plugs with M8 x 1.0mm thread 3. Includes required adaptors, centring and cleaning tools 4. Safety remove the glow plug without damage the engine 5. Tap Dimensions:M5.5 x 0.9, M8 x 1.0mm 6. Glow Plug Applications: M8 x 1.0mm

Master Glow Plug Thread Repair Kit 0XAT1714 1. Unique and wide assortment for thread damaged or worn oďŹ&#x20AC; thread repairing 2. For sparks plugs, glow plugs and lamda sensor threads 3. Includes threaded tap and assembly tool 4. Fast repair and without costly replacement of bearing housings and components 5. Contents: - Repair set for glow plug threads M8 x 1,0 - Repair set for glow plug threads M9 x 1,0 - Repair set for glow plug threads M10 x 1,0 - Repair set for glow plug threads M10 x 1.25 - Repair set for glow and spark plug threads M12 x 1.25 - Repair set for lambda sensor threads M12 x 1,5 - Repair set for spark plug threads M14 x 1,25 - Repair set for lambda sensor threads M18 x 1,5 - Glow pin canal cleaning brush, brass - Glow pin canal cleaning brush, nylon - 20 blades feeler gauge,metric

Glow Plug Thread Repair kit - M10 x 1.0mm 0XAT1725 1. Repair of threads in the cylinder head 2. Insertion tool for new thread inserts also included 3. New insert will remain in-situ even if Glow plug is subsequently removed 4. Includes replacement inserts 5pc of each M10x1.0x12mmL & M10x1.0x19mmL,three cutters and assembly tool

31PCS Glow Plug Tool Set 0XAT1831 1. Thread glow plug application: M10 x 1.0mm 2. Suitable for VW-Audi V6TDI engines: 2.5L (AKB,AKE,AKN,AYM;BAU;BCZ,BDG,BDH,BFC); 2.7L(BPP,BSG)and 3.0L(ASB,BKN,BMK,BNG,BUN,BUG) 3. Tap Dimension: 1/4" x 20 UNC thread,M10 x 1.0mm thread M12 x 1.0mm

168


Engine Tools Glow Plug Thread Repair kit 0XAT1720 - M8 x 1.0mm 0XAT1721

- M9 x 1.0mm

0XAT1722

- M10 x 1.25mm

1. Repair of threads in the cylinder head 2. Insertion tool for new thread inserts 3. Also included New insert will remain in-situ even if Glow plug is subsequently removed 4. Includes ďŹ ve replacement inserts and three cutters

Glow / Spark Plug Thread Repair kit - M12 x 1.25mm 0XAT1726 1. Repair of threads in cylinder head 2. New insert will remain in-situ even if Glow/Spark plug is subsequently removed 3. Includes replacement inserts 5pc of each: M12x1.25x12mmL, M12x1.25x19mmL &M12x1.25x26mmL, three cutters and assembly tool

Glow Plug Aperture Cleaner/ Reamer Set 0XAT1396 1. Clean the base aperature of M8, M10 and M12 Glow Plugs 2. Includes 3 reamers and 4 glow plug sizes: M8x1.0; M10x1.0;M10x1.25; M12x1.25 3. Manufactured from Chrome 4. Vanadium for strength

Glow Plug Thread Repair Kit 33pc 0XAT1397 1. Repair taps and coils for repairing the threads on 8 / 10mm glow plugs on alloy cylinder heads 2. Tap sizes: M8 x 1.0 / M10 x 1.0 /M10 x 1.25 / M12 x 1.0 M12 x 1.25 / M14 x 1.25 3. Coil sizes: M8 x 1.0 / M10 x 1.25 / M10 x 1.0 / M12 x 1.0 M12 x 1.25 / M14 x 1.25

Oil Mist Separator Wrench 107mm - HINO 0XAT9060 1. HINO oil mist separator wrench(8 Ribs,107mm), 1/2" Dr. 2. Application: HINO truck year 2003~2006 or after 2010 3. Genuine no: 103251,S23401-11840-A

169


Engine Tools 15pcs Air Valve Spring Compressor Set 0XAT1554 1. 3/8â&#x20AC;&#x153; drive T-type handle or ratchet 2. extensive accessories 3. To avoid the engine valve from falling into the body due to a counterpressure, caused by air delivered via a spark plug-thread 4. Contents: 3-Adaptors 23mm, 25mm, 30mm; 1-Body; 1-Air Support Rod; 3-Cover Pipes

Valve Spring Compressor Kit 0XAT1095 1. Use on SOHC and DOHC engines 2. Allow the removal of valve springs and valve stem oil seals 3. With the cylinder head in place 4. Fast set up time due to the twin rail pivot system 5. Single handed operation 6. Contents: 2 - Support bar 1 - Spark plug air line adaptor 2 - Adjustable upright 1 - Compressor force screw assembly 1 - Valve adaptor 1 - Extension rods

Valve Spring Compressor 0XAT1117 1. For large diesel and petrol engines 2. Give improved visibility and ease of use in conďŹ ned areas 3. Collet release adaptors 25mm and 30mm 4. Jaw opening Min 35mm Max 142mm 5. Throat clearance: 150mm

Valve Spring Compressor - Multi Valve 0XAT1134 1. Use on multi valve petrol and diesel engines 2. With deep-seated valves 3. For general use on OHC, OHV and CVH engines 4. Universal jaw with 55-175mm capacity and 165mm throat depth 5. Reversible jaw and adaptor 6. Twin cam action permits use from above or below valve

Valve Spring Compressor - Dual Size 0XAT1135 1. Suitable for Multi-Valve, Zetec engines 2. Large throat clearance for larger engines 25mm x 30mm collet release adaptors

170


Engine Tools

Water Pump Pulley Wrench Set 10pc 0XAT1116 Applications:Mercedes, BMW, Ford and GM vehicles

Valve Spring Compressor OHV 0XAT1179 1. Replaced without the need to remove the cylinder head 2. Used in conjunction with 0XAT1032 3. Compressed Air Adaptor 4. Reversible jaw adaptor and automatic cam action lock to pre-set spring tension 5. Use on a wide range of OHV, OHC and CVH engines 6. Not suitable for engines with deep-seated valves

Compressed Air Adaptor 0XAT1032 1. Use with 0XAT1179 to hold valves closed whilst spring is compressed 2. Spark plug adaptor with M14 and M18 threaded 3. Fittings for car and light commercial use 4. Maintains cylinder pressure when air supply is cut 5. Requires a 90-125psi supply

Valve Spring Compressor 0XAT1296 1. Easily removes valve springs on most cars and light trucks 2. Works with cylinder head on or oďŹ&#x20AC; the engine 3. Grip the valve spring in parallel compression

Valve Spring Compressor Lever Type OHV/OHC 0XAT1194 1. For the replacement of valve springs and valve stem oil seals 2. Without the need to remove the cylinder head 3. Conjunction with AT1032 compressed air adaptor 4. Adjustable handle, claws and hooks 5. Allow use on OHV engines

171


Engine Tools Valve Spring Compressor 0XAT1239 1. For service to most valve train components 2. Remove and replace valve spring in GM 8 cylinder engines 3. Replaces weak or broken valve springs and guide seals with cylinder head on the engine

Valve Spring Compressor - Ford CVH 0XAT1384 1. Permits valve stem seal and valve spring replacement without the need to remove the cylinder head 2. With radiused fulcrum for smooth spring compression 3. For CVH Ford engines 1.3, 1.4 and 1.6 4. Fitted to Escort (inc. XR3i and RS Turbo), Fiesta (inc. RS Turbo) and Orion

Rocker Arm & Valve Compensator Tool 0XAT1385 1. Use on Vauxhall/Opel OHC engines 2. Permits quick, on vehicle, removal of rocker arm and valve play compensator 3. Mounts on camshaft housing 4. Cast construction with knurled hex head ďŹ xing.

BMW (N20,26, 55) Valve Pressure Spring Installer/Remover 0XAT1929 - Suitable for: BMW N20,N26,N55. - Special designed to remove and install the pressure spring on intermediate lever. - BM number: 117110.

Mercedes Valve Adjustment Wrenches - 17mm 0XAT8702 - Size: 17mmL x1/2â&#x20AC;?Dr. x H21 - Material: Cr-Mo Steel Chrome plated - Can be used with Torque wrench - Application: Mercedes 100,110,114,115,123,130

Valve Collet Installer/Remover 0XAT1027 1. Aid simple and secure installation of valve spring collets 2. Quick and easy retrieval of lost collets using magnetic tip 3. Suitable for 16 and 24 valve engines 4. Use on heads with recessed valves

172


Engine Tools Valve Stem Seal Pliers Long Stem Straight 0XAT1030 1. Aids removal and installation of valve stem seals 2. On 16 and 24 valve OHC engines 3. Steel pliers with insulated handles 4. Serrated tips aid grip 5. Suited to stubborn seals 6. Length: 280mm

Valve Seal Remover and Installer 0XAT1133 1. Works on both valves still seated or removed 2. Precision machined seal driving adapters guide the seal for proper setting 3. Contains: 1 - Valve stem seal plier 1 - Drive handle 150mm long 2 - Deep seal driving sockets for seals O.D. 10.8 - 14.8mm 7 - Seal driving adapters fit seals 5mm, 5.5mm, 6mm, 6.6mm, 7mm, 8mm, & 3/8"

Valve Seal Removal tool Hammer with Sliding 0XAT1291 1. Allows quick and easy removal of the valve-stem-oil-seals 2. Without any risk of damage tp the inner walls of the cylinder-head in the area of the bucket-tappets 3. For valve stem seal ring 4. Capacity: Ø10mm to Ø19mm

Valve Shim Adjustment Remover 0XAT1741 1. Use on European Cars with overhead camshafts 2. For use on overhead camshafts 3. European models including Volvo; Vauxhall/Opel 4. T-bar action

Valve Seat Cutter Kit 10pc 0XAT1616 1. For re-cutting inlet/exhaust valve seats concentric to the valve guides 2. Features tungsten carbide cutting blades, expandable pilots and double end cutters for increased application 3. Pilot Range: 5.5-10mm 4. Cutte r Sizes: Ø28-37mm 75º & 45º, Ø37-44mm 75º, Ø28-37mm 30º, Ø37-46mm 60º & 45º

173


Engine Tools Valve Grinder 0XAT1137 1. Hand grind small and large flat-head unslotted valves 2. Use place grinding compound on valve face and put in seat 3. 0XAT1137-01 : Small Cup Ø5/8" & 13/16" Valve Grinder 0XAT1137-02 : Large Cup Ø1-1/8" & 1-3/8" Valve Grinder

Condenser Fin Comb 0XAT3016 1. Cleans and straightens condenser and evaporator fins. 2. Six side head fit 6,8,10,12,14 and 15 fins per inch operation.

Radiator Cap Wrench 0XAT1124 1. Removes all standard radiator caps. 2. Allows the extra torque required to free tight caps to be applied easily and safely

Engine Cleaning Kit with Syphon Tube 0XAT1165 1. For engine, engine bay and similar applications 2. With standard and long alumininum nozzles and 1.8mtr suction tube 3. Specifications: - Working Pressure:75-120psi - Air Consumption:6.5cfm - Suction Hose Length:1.8mtr - Air Inlet: 1/4"BSP

Flexible Magnetic Pick-Up & Claw Tool 0XAT8500 1. Bowden cable construction enables access to confined areas 2. 0.7kg Magnetic pick-up with energy ring, reduces side pull aiding the retrieval of objects at full reach 3. Handle allows effortless control over expandable/ retractable claw 4. Features anodised aluminium housing 5. Length: 700mm 6. Magnetic Lifting Capacity: 0.7kg

Flexible Magnetic/Claw Pick-Up Tool & LED Light 0XAT8501 1. Bowden cable construction enables access to confined areas 2. 0.7kg Magnetic pick-up with energy ring, reduces side pull aiding the retrieval of objects at full reach 3. Handle allows effortless control over expandable/ retractable claw 4. Fitted with LED to illuminate poorly lit areas 5. Length: 700mm 6. Magnetic Lifting Capacity: 0.7kg

174


Engine Tools Magnetic Pick-Up Tool with Power Ring 1.6kg 0XAT8527 1. Chromed metal body with telescopic six section and flexible shaft pick-up tool 2. Features washer jet tool, pocket clip and knurled cap 3. Energy ring around magnet to reduce side pull aiding retrieval of objects at full reach 4. 1.6kg Pick-up capacity from Ø8mm magnet 5. Min./Max. Extended Length: 155/590mm

Telescopic Magnetic Pick-Up Tool 3.6kg 0XAT8528 1. Magnetic pick-up tool with gold effect head and pocket clip 2. 3.6kg Pick-up capacity from Ø12mm magnet 3. Min./Ma. Extended Length: 140mm - 655mm

Telescopic Magnetic Pick-Up Tool 1.6kg 0XAT8529 1. Heavy-duty seven section magnetic pick-up tool with textured grip and pocket clip 2. 1.6kg Pick-up capacity from Ø10mm magnet 3. Min./Max. Extended Length: 175/880mm

Telescopic Magnetic Pick-Up Tool 1.5kg 0XAT8530 1. Metal bodied pick-up tool with gold cap, pocket-clip and magnetic retainer 2. 1.5kg Pick-up capacity from Ø10mm magnet 3. Min./Max. Extended Length: 130/600mm

Telescopic Articulated Mirror - Ø33mm 0XAT8524 1. Heavy-duty seven section extending mirror with textured grip and pocket clip 2. Ø33mm Inspection mirror is mounted on twin ball joints for maximum articulation 3. Min./Max. Extended Length: 225/935mm

Telescopic Articulated Mirror - Ø30mm 0XAT8525 1. Chromed metal five section body with pocket clip for safe storage 2. Ø30mm Inspection mirror is mounted on twin ball joints for maximum articulation 3. Min./Max. Extended Length: 180/530mm

175


Engine Tools Flexible Shaft Inspection Tool - 70 x 50mm 0XAT8531 1. Versatile inspection tool features combination flexible shaft and remote adjustable 70 x 50mm inspection mirror 2. Simply depress plunger to move the mirror to the desired angle 3. Length: 510mm

Flexible Shaft Inspection Mirror Ø60mm 0XAT8533 1. Heavy rubber grip and strong, spring steel flexible shaft 2. Ø60mm Mirror suitable for use in confined areas 3. Length: 485mm

Flexible Magnetic/Claw/Mirror/LED Pick-Up Tool 0XAT8521 1. Bowden cable construction enables access to confined areas 2. 0.7kg Magnetic pick-up with energy ring, reduces side pull aiding the retrieval of objects at full reach 3. Handle allows effortless control over expandable/ retractable claw 4. Fitted with LED & inspection mirror 5. Length: 700mm 6. Magnetic Lifting Capacity: 0.7kg

Telescopic Magnetic Pick - Up & Mirror Set 2pc 0XAT8523 1. Seven section stainless steel magnetic pick-up tool with textured grip and pocket clip 2. Ø10mm Magnet with 1.6kg capacity 3. Energy ring around magnet reduces side pull aiding retrieval of objects at full reach 4. Five section stainless steel inspection mirror with textured grip and pocket clip 5. Ø40mm Mirror is mounted on twin ball joints for maximum articulation 6. Pick-Up Min./Max. Extended 7. Length: 175/885mm 8. Mirror Min./Max. Extended 9. Length: 225/700mm

Flexible Inspection Mirror with Light 0XAT8532 1. Strong flexible metal element with illuminated tip and fully articulated inspection mirror 2. Twist on/off control 3. Suitable for automotive and industrial applications 4. Length: 520mm Cell Qty x Type: 2 x AA (not included)

176


Engine Tools Telescopic Magnetic Pick -Up Tool Kit 5pc 0XAT8526 1. Heavy-duty six section telescopic extending shaft with textured grip for comfort and control 2. Quick release adaptor for easy fitting of individual accessories 3. Includes Ø35mm inspection mirror, which is mounted on twin ball joints for maximum articulation, 50 x 80mm hinged rectangular mirror, Ø10mm magnet with 1kg capacity 4. Magnet has recessed LED to illuminate pick-up area 5. Supplied with batteries (3 x Lr44) 6. Extended Length: 170/765mm 7. Magnet Capacity:1kg 8. Mirror Sizes: Ø35mm, 50 x 80mm 9. Cell Qty x Type : 3 x LR44 (supplied)

Part Of Spark Plug Tools-3/8” 0XAT8265 1. 180mm long 2. Specifically designed for Ford Ecoboost 1.5 engines 3. Manufactured from Chrome Vanadium 4. Bi-Hex profile

Part Of Spark Plug Tools -3/8” Dr.x16mmx12PT 0XAT8266 1. 16mm x 3/8”D 2. Specifically designed for Ford Ecoboost 1.6 engines 3. Special length 215mm x 12 point with rubber insert 4. Specifically designed for better access 5. Manufacture from Chrome Vanadium

5 in 1 Pistol Grip Pliers 0XPR1046 1. Material: High Carbon Steel #1055 with dipping handle. 2. 10“ Long nose pliers come with additional crimping cutting, wire stripping & fastener extractor functions. 3. 3.5" Long gripping nose pliers to pull, twist, bend & shape 4. Bolt / Screw extractor. 5. 7 Wire strippers with serrated jaw for wires 6. 10-12-14-16-18-20-22 (AWG) 7. Wire cutter 8. Crimpers for wires 10?22 (AWG)

Universal Hub Separator 0XAT4394 1. Universal hub separator set is designed for removing hubs on popular front wheel drive vehicles 2. Durable Acme threaded forcing and adjusting screws ensure long product life 3. Applications include: Daihatsu, Fiat, Ford, GM, Honda, Hyundai, Mazda, Mitsubishi, Nissan, Renault, Saab, Subaru, Suzuki, Toyota, Volkswagen 4. Some spares available upon request as special order

177


AC / Fluid / Oil A/C Clutch Holding Tool 0XAT3001 1. Prevents the clutch plate from turning when moving the shaft nut 2. For GM R-4 compressors, also fit other GM, Pitts,Warner, and Ogura clutches

Deluxe A/C Clutch Hub Puller/Installer Kit 0XAT3004 1. 18 Pc deluxe A/C compressor clutch hub puller/installer set 2. Remove & install clutch hubs for compressors 3. 3 slots puller plate fits clutches 4. Including 5 pieces of A/C compressor orifice tube tools 5. Applications: GM, Ford, Chrysler, European and Japanese vehicles

A/C Clutch Hub Puller and Installer Kit 0XAT3005 1. For damage-free removal and installation of the clutch hubs 2. These air conditioning compressors: GM-Harrison DA-6, HR-5, V-5, A-6 and early R4; Nippondenso Ford/Chrysler A590, C171, FS-6, 6P148A (new style); Sanden & Sankyo;York/Tecumseh HR980; Zexel/Mitsubishi CH series 3. Includes a removing flange, plus forcing screws and adapter assemblies 4. Remove and install virtually clutch hubs

A/C Clutch Hub Tool Kit With Spanner 0XAT3006 1. Contains: - Universal clutch holding tool - Sanden SD 5 & 7 Clutch end plate remover - Bearing - Metric clutch plate remover/installer - Fractional clutch plate remover/ installer 2. For Chrysler C171 /Ford 5 61 Hitachi-MJ / Tecumseh HR -9801

Air Conditioning & ECU Tool Kit 0XAT3007 1. Has a four piece insert nut set for the air conditioning units 2. For Audi/Volkswagen/Opel/Vauxhall and 7pce of star bits (security) for the ECU, Airlow, mass sensors and injection pumps on BMW, Fiat, Mercedes-Benz, Peugeot, Renault, Rover, Toyota as well as Audi, Volkswagen, Opel/Vauxhall 3. Supplied in a blow mould case for storage 4. Contents:- 4pc valve and insert nut set for air conditioning 5. fitted to Audi / Volkswagen and Vauxhall/Opel 6. - 7 x 5 point tamperproof bits TS10 / TS15 / TS20 / TS25 / TS30 / TS40 for use on ECU/Airflow/mass sensors/ injection pumps

178


AC / Fluid / Oil A/C SAE Fitting Thread Chasers Set 6pce 0XAT3009 1. Ths kit is designed to repair and recondition threads on gas and liquid fittings in air conditioning, hydraulic and gas applications 2. Application for internal/external threads Repairs damaged threads on condensers, accumulators, evaporators and hose assemblies 3. Set Includes: 1-1/16”-14UNF, 1”-14UNF, 7/8”-14UNF, 3/4”16UNF, 5/8”-18UNF

A/C Metric Thread Chaser Kit 9pce 0XAT3010 1. Repair and recondition threads on gas and liquid 2. Fittings in air conditioning, hydraulic and gas applications 3. Set Includes: M14 X 1.5; M22 X 1.5;M16 X 1.5; M24 X 1.5; M18 X 1.5; M27 X 2;M20 X 1.5; M28 X 1.5

Universal A/C Adapter Set 0XAT3012 - Adapter set includes hose end shut-off valves, flex adapters, GM and Ford quick - Contents: 1/4" x 1/4" shut-off 1/4" x 3/16" shut-off 1/4" x 3/16" GM flex 1/4" x 1/8" Ford flex GM 1991 & later service adapter Ford quick disconnect GM and Ford quick disconnect GM large bore quick disconnect

GM A6, R4, Late DA6, HR-6, V5, 6 Pole R4 Seal Installation/Removal Tool Set 0XAT3013 1. Includes: - Internal Snap Ring Pliers - 0-Ring Seal Sleeve Remover - Seal Seat Remover - Seal Remover 2. Installer- Clutch Plate Remover(Coarse Thread) - Clutch Plate Installer(Coarse Thread) - 0-Ring Installation Guide - Seal Seat Installer - Seal Protector - Ceramic Seal Installer - Universal Clutch 3. Holding Tool- Clutch Plate Removal Arbor

179


AC / Fluid / Oil Dual R134a/R12 Manifold Gauge Set with Sight Glass 0XAT3030A 1. Aluminum manifold gauge with sight glass for R134a & R12 refrigeration. 2. Hose length: 1530mm 3. Low And High Side Professional Service Couplers

1/4" Adjustable AC R134A Quick Coupler Adapter 0XAT3031 1. 2 Color Coded 90 Degrees Quick Connectors for Red: High Blue: Low 2. Coupler Interface Fits with R134 Service Ports, 1/4" Male Flare 3. Side Fitting for A/C Manifold Gauge Set (R-134A) Type 4. Quick and Easy Connect/Disconnect with High Flow Rate

Universal A/C Valve Tool 0XAT3026 1. 2 Sides Universal Valve Core Installer/Remover Tool 2. Double ended for easy replacement of Standard, SCHRADER GM Large Bore, JRA, 8mm and 10mm core valve.

Air Conditioning Spri ng Lock Coupling Tool 0XAT3020 1. Spring type coupling connectors for air conditioning lines 2. Prevents spray when disconnecting lines 3. For Ford, Vauxhall/Opel and Chrysler vehicles 4. Contents: Coupling Tools; 3/8",1/2", 5/8", 3/4"

Spring Lock Air Conditioning Coupling Tool Set 4pc - Vauxhall/Opel 0XAT3024 1. Spring type coupling connectors for air conditioning lines 2. Prevents spray when disconnecting lines 3. For Vauxhall/Opel vehicles

Air Conditioning & Fuel Disconnection Tool Set 2pce 0XAT3035 1. Set Includes disconnect tools 2. Use on Ford, GM and Mazda vehicles 3. Used on Chrysler and Ford A/C line adapters 4. Tools available individually 5. Sizes: - Fuel Line Tool: 5/16", 3/8" - Air Conditioning Tool: 3/8", 1/2", 5/8", 3/4"

180


AC / Fluid / Oil Disconnect Tool Set 9pc 0XAT3019 1. For A/C lines, fuel lines, and transmission cooler lines 2. Contains 3/8", 1/2", 5/8", and 3/4" spring lock disconnect tool 3. For A/C lines on 1981 thru 2003 Ford cars and trucks, 1994 thru 2003 Chrysler and Jeep vehicles 4. Contains 3/8" and 1/2" fuel line disonnect tool for Ford vehicles 5. Contains the 5/16" and 3/8" fuel line disconnect tools for GM and Chrysler vehicles 6. Contains the transmission oil cooler 7. line disconnect tool used on GM and Ford vehicles

Fuel & Air Conditioning Disconnection Tool Kit 21pc 0XAT3002 1. Separating automotive air conditioning hoses and fuel lines 2. For amongst others Ford and Vauxhall/Opel 3. Contents: - Spring Lock Couplings; 3/8", 1/2", 5/8", 3/4" - Colour Coded Disconnecting Set; 5/16", 3/8", 1/2", 5/8", 3/4", 7/8" - Fuel Line Disconnect Tool - Ford Oil Cooling Line Disconnect Tool - Ford Fuel Line Coupling Tool, Ford/Vauxhall/Opel Quick Disconnect Tool - 7pc Disconnecting Set, Spare Rubber Bands

Fuel & Air Conditioning Disconnection Set 8pc 0XAT3018 1. For de-coupling automotive air conditioning hoses and fuel lines 2. With spring loaded action allows one handed operation 3. For wide variety of vehicles 4. Contents: 1pc - 5/16"x8mm, 3pc - 3/8"x9.5mm, 1pc - 1/2"x13mm 1pc - 5/8"x16mm, 1pc - 3/4"x19mm, 1pc - 7/8"x/22mm

Fuel and Air Conditioning Line Disconnect Tool Set 0XAT3021 1. Fittings on fuel lines and air conditioning lines 2. Colour coded, anodized aluminum for easy identiďŹ cation 3. Fit vehicles: 5/16", 3/8", 1/2", 5/8", 3/4", and 7/8"

181


Engine Tools

7pcs Fuel and Oil Line Disconnect Set 0XAT3022 1. Contents: Four of the most popular size fuel and oil line disconnect tools used on GM, Ford and Chrysler vehicles 2. Tools are colour coded to work on the following lines: Black – 1/4" fuel line; Red – 5/16" fuel line Gold – 3/8" fuel line; Blue – transmission oil line 3. Oil cooler line disconnect tool used on GM and Ford vehicles 4. For newer Tahoe andlight-duty trucks with 5.3L V8 engine 5. Ford fuel line disconnect tool

Fuel and Oil Line Disconnect Tool Kit 4pce 0XAT3023 Contents: - Blue–transmission oil line - Black–1/4" fuel line - Red -5/16" fuel line - Gold–3/8" fuel line

Full-Coverage Disconnect Tool Set 29pc - Master 0XAT3042 1. Required for disconnecting heater hoses, transmission oil cooler pipes, air conditioning pipes and fuel lines 2. Use on newer model vehicles

A/C & Fuel Line Disconnet Tool Set 0XAT3037 1. Disconnects air conditioning lines and connect fuel lines 2. Material: ABS material 3. Size:1/4", 5/16", 3/8",1/2", 5/8", 3/4",7/8"

Ford / GM Qui ck Disconnect Tool 0XAT3033 Separates quick connectors from radiators,transmissions, power steering lines, etc.

182


Engine Tools Master Shaft Seal Service Tool Set 0XAT3014 1. Contains: - Internal Snap Ring Pliers - O-Ring Seal Sleeve Remover - Seal Seat Remover - Seal Remover & Installer - York & Tecumseh Oil Level 2. Dipstick - Chrysler Oil Level Dipstick - 5/8" x 2" x 11 NC Clutch 3. Remover- 5/8" x 2" x 18 SAE Clutch 4. Remover - Clutch Plate Remover - O-Ring Installation Guide. - Clutch Plate Installer - O-Ring Installation Guide - Seal Seat Installer - Seal Remover - Seal Installer & Plate 5. Alignment - Seal Protector - Seal Remover & Installer - Clutch Plate Installer - O-Ring & Snap-Ring Installer - Seal Protector Sleeve - Clutch Plate Installer - Tool Box - Clutch Plate Installer - Seal Seat Remover - Seal Seat Installer - Clutch Plate Remover - A/C Service Manual - Clutch Plate Remover Arbor - O-Ring Installation Guide - Seal Remover & Installer - Shaft Protector - Clutch Plate Remover - Ceramic Seal Seat Remover& Installer - Universal Clutch Holding Tool

Fuel Line Disconnect Set 3pc 0XAT1087 1. For breaking into fuel lines and hoses ďŹ tted with quick release coupling's 2. Applivations: Ford / Vauxhall/ Opel/ Renault/ Fiat / Chrysler/ Chevrolet 3. 3 Sizes in set: - 120 x 8mm twin peg pliers with red handles for use on Chrysler / Ford / and Renault petrol engines - 120 x 8mm diameter pliers with green handles for use on GM (vauxhall / Opel) fuel systems - 120 x 10mm diameter pliers with blue handles for use on Chrysler / Ford and Renault diesel fuel systems

Fuel Disconnecting Tool- Mini Cooper 0XAT3065 1. A fuel line from low pressure fuel supplies the high pressure fuel pump requires the special tools for removal. 2. This tool is special for disconnecting and removal the line form high pressure pump. 3. Work with AT3015 (low pressure fuel line disconnector --Optional) to remove the fuel line. OEM Ref: 130250

183


Engine Tools BMW Line Disconnect Tool 0XAT3015 1. Power steering and transmission line disconnect tool for 1999-2005 BMW 3-series and X5 2. Made of red-anodized aluminum 3. Design of the BMW 5346,also covers transmission cooler line

Fuel Feed Pipe Pliers 0XAT1526 1. For undoing quick release connections on fuel feed pipe lines 2. Applications : Opel/Vauxhall, Fait, GM, VW/Audi, etc.

Fuel Feed Pipe Pliers 0XAT1597 1. Aluminium alloy construction with profiled head 2. For releasing connections on in-line fuel line filters during servicing and maintenance

Hose Removal Pliers 0XAT1079 1. For removal of 4mm (5/32") to 13mm (1/2") vacuum and fuel hoses 2. Quick, easy to use 3. Won’t damage hoses

Fuel Line Pliers 0XAT1612A 1. Quick and easy fuel connector removal and replacement 2. Use on fuel filter connectors during replacement 3. Prevents fuel leakage from damaged fuel connectors 4. Applications: Audi, GM, Mercedes including M- class, Toyota and VW models

Fuel Line Disconect Pliers 0XAT1701 1. For undoing quick release connections on fuel feed pipe lines 2. For Opel/Vauxhall, Fiat, Volkswagen and PSA

184


Engine Tools Fuel Line Pliers VAG 0XAT1719 1. Specially introduced fuel line pliers use on three ended hose clips 2. Applications: Audi, Seat, Skoda and VW

Fuel & Injection Line Clamp & Stopper Kit 0XAT1382 1. Use on all Fuel supply lines to stop the flow of fuel after disconnection 2. Use on flexible and solid fuel/ transmission/ brake lines 3. Pipe separator included 4. Extended clamp for flexible hoses

Fuel Tank Sender Wrench Set 0XAT1217 1. Removing the retaining ring on fuel tank senders 2. Select two or three jaws 3. For size: 75-160mm; 80-122mm; 110-170mm

Master Fuel Tank Sender Wrench Set 0XAT1218 1. Universal application of 24mm Driver. 2. For removing and replacing the Plastic Retaining Ring on the sender Unit on Fuel Tanks. 3. Include: 5 series of extension, that include for PSA and Renault models. 4. Range for: Min 70mm to Max 170mm

Fuel Pump Retainer Wrench 0XAT3003 1. Removes and secures lockdown fuel pump retaining rings 2. Minimizes damage of fuel tanks, fuel pumps or retaining rings 3. Heavy-duty construction with offset cushion handle design

Fuel Tank Cup Wrench 0XAT1248 1. Designed to remove the plastic fuel tank lid 2. Application: Mercedes-Benz W202

185


Engine Tools

Fuel Tank Lid Dissemble Tool 0XAT1258 1. Remove the plastic fuel tank lid easily 2. Application: Benz W211/W203, BMW E36/ E46, VW, Audi

Fuel Gas Tank Lid Remover - Mercedes Benz W210 0XAT1259 1. Designed to remove the plastic fuel tank lid 2. Application: Mercedes-Benz W210

Fuel Tank Sender Wrench - 2 Leg, Ø110mm - 170mm 0XAT1273 1. Removing and refitting fuel tank sender mounting rings 2. Used with 24mm spanner or socket 3. Capacity: Ø110mm-170mm

Fuel Tank Sender Wrench - 3 Leg, Ø75mm - 160mm 0XAT1274 1. Removing and refitting fuel tank sendermounting rings 2. Used with 24mm spanner or socket 3. Capacity: Ø75mm-160mm

Fuel Filter Key 109mm, 8 Flute, 3/8" Drive 0XAT1449 1. Removing and refitting the fuel filter cap when replacing the fuel cartridge 2. Avoid damage to components when working on fuel system 3. Applications: Citroen, Renault and Peugeot engines

186


AC / Fluid / Oil Fuel Filter Key 108mm/46 Flute - 3/8" Drive 0XAT1450 1. Removing and refitting the fuel filter cap when replacing the fuel cartridge 2. Avoid damage to components when working on fuel system 3. Applications: Citroen, Peugeot and Renault HDi Diesel Engines

Fuel Filter Removal Kit - Vauxhall/Opel 0XAT1443 1. Designed to remove the fuel filter on Vauxhall/Opel vehicles fitted with 1.9CDTi engines 2. Fit with some Alfa Romeo, Fiat and Saab 1.9JTD/TD vehicles 3. Filter housing fits into the plastic holder using a vice, so the key can be used to unscrew the housing cap without causing damage

Universal Radiator Pressure Test Kit 0XAT1411 1. The adapter’s expandable rubber body allows user to connect to most Automotive Cooling 2. Systems without the need for additional costly adapters. 3. User can perform pressure testing and cooling system diagnostics simultaneously. 4. 0-35 psi, color-coded gauge, and pressure release valve, plastic carrying case. 5. Comprehensive operating instruction enclosed.

Carbon Cleaning Set For Manifoid And Injector 0XAT2162 - Dimension : 380x100x390 m/m - Weight : 21.1 kgs - Power : Air operated - Capacity : 1000 ml / bottle

Diesel Injection System Priming Device 0XAT1229 1. Diesel Injection System Priming Device. Essential for reintroduction of fuel into fuel pump following maintenance such as fitting og new diesel filter drainage of fuel tank. Must be used whenever fuel system is disturbed. 2. Applications: Vauxhall; 2.0Di & 2.2Di

187


AC / Fluid / Oil Fuel Tank Drainer - 90ltr Stainless Steel 0XAT1744 1. Stainless steel fuel drainer with venturi type suction 2. 90ltr Capacity tank for petrol or diesel 3. With suction tubes and adaptors for breaking into vehicle fuel system 4. CE Certified (971231EC) 5. Tank Capacity: 90ltr 6. Recommended Air Pressure:72-100psi 7. Air Consumption: 6cfm

Air Operated Fuel Tank Drainer - Stainless 40ltr 0XAT1745 1. Stainless steel fuel drainer with venturi type suction 2. 40ltr Capacity tank suitable for petrol or diesel 3. With suction tubes and adaptors 4. For breaking into vehicle fuel system 5. CE Certified (971231EC) 6. Air Operated Fuel Tank Drainer 7. Tank Capacity: 40ltr 8. Recommended Air Pressure: 72-100psi 9. Air Consumption: 6cfm

30L Waste Oil Drainer 0XAT2157 1. Composite lid and drum with 30ltr reservoir and drain pan on telescopic post. 2. Gravity drain using tap on rear of unit. Includes visible “Full Drum”device. 3. Includes large diameter drain pan insert and heavy duty mesh for draining oil filters. 4. Made from high density Polyethylene.

188


AC / Fluid / Oil Syringe for Vehicle Fluid Change 0XAT1797 Weight: 0.294kg / Capacity: 200cc 0XAT1798 Weight: 0.9kg / Capacity: 1.5L 1. Transparent design to see fluid visually. 2. Suitable for fluid suction and supply in vehicle service. 3. Applications such as gear oil and differential fluid. 4. Composite plastic resists to brake fluid and antifreeze.

2pcs Oil Funnel W/new Adaptor 0XAT1881 1. Length: 320mmL 2. Material: PA6 3. Application: VW, Audi, Seat, Skoda, Mercedes Benz, BMW, TOYOTA, Mitsubishi, new VW Golf 7 & new Audi A3 2013

Flexible Funnel 0XAT2152 • Resistant from Petroleum, Diesel, Engine Oil, Coolant, Hydraulic, Brake Fluid and Battery Acid. • Perfect for storage in service cart. • Flexible to be any shape and easy to clean. - 0XAT2152A (Small): 4.75”x9” (12 x 22 cm) - 0XAT2152B (Large): 6.5”x14.5” (16.5 x 36 cm)

Universal Coolant Filling Set 0XAT1410 1. Universal set for easy, efficient and mess free refilling during cooling system bleeding work 2. Includes five rubber seal adaptors (31, 35, 40, 42, 45mm) to suit most vehicles 3. Also includes one rubber tapered cone adaptor for variable applications and multi-purpose use 4. Built in shut off valve and special designed flow pipe system helps prevent air locks

189


AC / Fluid / Oil Universal Oil Funnel 0XAT1920 - Adjustable mouth clamp can fit 28mm-74mm (1.1in-2.9in) oil filter hole. - Clamp mouth can seat on oil filter hole perfectly without need holding by hand. - Funnel bottleneck is threaded to seat on clamp perfectly. - Transparent material in lower chamber for easy checking the oil passing.

Cooling System Filler - Japanese Vehicles 0XAT1363 1. Refill coolant during cooling system bleeding process Quicl, efficient and no mess. 2. Applications:Mitsubishi, Ford, Mazda,Honda, Toyota

Cooling System Filler - Korean Vehicles 0XAT1364 1. Refill coolant during cooling system bleeding process Quicl, efficient and no mess 2. Applications: Hyundai, Kia & Daewoo

Siphon Coolant Refill Kit - Spill Free Funnel 0XAT1921 - Special Siphoned designed to avoid coolant splitting over from radiator. - Special siphoned designed to avoid bubble up from funnel. - 2 elbow adaptor and 1 extension adaptor will help you refill coolant at any positions - Caution: Never opening radiator cap when it is hot.

Oil Gauge/dipstick Audi 0XAT1717 1. Designed for measuring the oil levels on different Audi engines fitted with electronic oil level systems. 2. The tool also checks the oil levels in Audi A4/A5 6 cylinder petrol 3.2 1-4v engines. 3. Used to assist the calibration of the driver’s instrument panel. 4. OEM Code: T40178

190


AC / Fluid / Oil Transmission ATF Fluid Filling Dispenser System 9.5L 0XAT2505 Manual operated pump to fill fluid in transmission, differentials and transfer cases. 1. Viscosity Range: up to SAE 140 2. Output Capacity: 70 cc / cycle 3. Capacity of Tank: 9.5L 4. Adapting nozzle(8 units) for A1: Ford 1/8 NPT A2: Universal Nozzle (BMW, Honda, Nissan and ETC) A3: VW, Audi A4: VW, Audi, Porsche A5: VW, Audi, Mini Cooper 10x1.0 A6: Benz 722.9 12x1.5 A7: VW, Audi DSG 24x1.5 A8: VW, Audi CVT 22x1.5

Transmission ATF Fluid Filling System 12L 0XAT2154 1. Includes 10 adapters to connect to Ford, Toyota, BMW, Honda, Nissan, VW, Audi, Mercedes and Volvo transmissions (also for Direct-Shift Gearbox.) 2. Large 3 gallon (12-liter) reservoir with integrated manual pump, pressure gauge, and pressure relief valve. 3. Fluid is dispensed under pressure for smooth continual flow. 4. Integrated manual pump adds air above the fluid level to prevent aeration. 5. 1500mm ROHS PVC filling hose with a quick coupling that can be connected with ATF refill adapter.

Engine Pre-Lube Pump System, 7.5 L 0XAT1742 1. Ensure oil is present to internal engine components on the first start of new or rebuilt engine, and when major engine work is performed. 2. Including engine adaptors 3. Capacity: 7.5 liter

Transmission & Engine Oil Filling System 0XAT4089 1. Manually operated oil dispensing unit manufactured from composite materials. 2. Large visual measurement will identify amount dispensed. 3. Supplied with a range of five automatic transmission fluid adaptors. 4. Delivers approximately 70ml per stroke. 5. Features a fluid control valve and adaptor stowage to minimise oil leakage when not in use. 6. Capacity: 7 L 7. Hose: 1500mm

191


AC / Fluid / Oil Combo Fluid Extractor 0XAT2158 1. Uses both manual or air for operation 2. Venturi system design to provide excellent performance 3. Capacity : 9.50L 4. Maintenance free.

Dual Manual/Air Vacuum Oil & Fluid Extractor 9 Liter 0XAT2102 1. Uses manual pump or compressed air supply to generate vacuum. 2. Suitable for extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines,stationary engines and industrial machinery. 3. Supplied with Ø6 and Ø10mm suction probes and brake/clutch bleeding hose. 4. Capacity: 9 Liter 5. Suction Probes: Ø6 x 1100mm, Ø10 x 1100mm 6. Hose: Ø8 x 1100mm 7. Air Supply: 90psi(5cfm)

Manual Vacuum Oil & Fluid Extractor 9 Litter 0XAT2103 1. Uses manual pump to generate vacuum. 2. Suitable for extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. 3. Also suitable also for low viscosity fluids such as water. 4. Supplied with Ø6 and Ø10mm suction probes and brake/clutch bleeding hose 5. Capacity: 9ltr 6. Suction Probes: Ø6 x 1100mm, Ø10 x 1100mm 7. Hose: Ø8 x 1100mm

192


AC / Fluid / Oil Vacuum Oil & Fluid Extractor Air Operated 9 ltr 0XAT2104 1. Uses manual pump or compressed air supply to generate vacuum. 2. Suitable for extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. 3. Supplied with Ø6 and Ø10mm suction probes and brake/clutch bleeding hose. 4. Capacity: 9ltr 5. Suction Probes: Ø6 x 1100mm, Ø10 x 1100mm 6. Hose: Ø8 x 1100mm Air Supply: 90psi(5cfm)

Vacuum Oil & Fluid Extractor Air Operated 5.5 ltr 0XAT2105 1. Uses manual pump or compressed air supply to generate vacuum. 2. Suitable for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. 3. Supplied with Ø6 and Ø10mm suction probes and brake/clutch bleeding hose. 4. Capacity: 5.5ltr 5. Suction Probes: Ø6 x 1100mm, Ø10 x 1100mm 6. Hose: Ø8 x 1100mm 7. Air Supply: 90psi(5cfm)

Pneumatic Brake Fluid Extractor & Refilled Kit 0XAT2106 1. The unit creates a powerful vacuum that is used to bleed and flush hydraulic brakes and clutches. 2. Large, stable base so it won't tip, requires no special adaptors. 3. Automatic refilling of the master cylinder reservoir while bleeding. 4. Universal drain valve fits to most standard recycling system. 5. Specifications: - Air Supply: 70-170psi - Air Consumption:5.0 cfm - Refilled Bottle: 1.0 L - Inlet Size: 1/4" BSP - Extracting Tank Capacity: 2.0 L

193


AC / Fluid / Oil Brake Bleeding Kit 0XAT2009 1. Composite collection bottle with magnetic locating pad 2. Supplied with tube and connectors 3. Oversized bottle reduces overfilling

Automatic Brake & Clutch Bleeder 0XAT2023 1. Fast, easy and effective bleeding of brakes and clutch using air from tyre. 2. Innovative design incorporates valve for control of air pressure, extra-long air hose for use with larger vehicles and magnetic reservoir base to prevent accidental spillage. 3. Suitable for use with ABS systems. 4. Supplied with range of common adaptors.

Vacuum Brake Bleeder Kit 0XAT2026 1. Vacuum brake bleeder complete with 2 new fluid supply bottles (1 ltr), one is supplied with Adjustable Nozzle, another one is Fix Nozzle. 2. Removes fluid via nipples to allow bleeding or entire fluid replacement. 3. Air Supply: 90-120psi / Air Consumption: 180 ltr/min 4. Tank Capacity: 1 ltr 5. Vacuum: 60% 6. Inlet Size: 1/4"BSP

Pneumatic Vacuum Brake & Clutch Bleeder 0XAT2027 1. Simple, one man operation using standard workshop air supply (90-120psi) 2. Quick, clean and efficient 3. Does not require specialised brake reservoir caps 4. Draws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system 5. Utilises same vacuum unit as AT2028 6. Includes reservoir top-up kit and guidance notes 7. Air Supply:90-120psi 8. Air Consumption:180 ltr/min 9. Tank Capacity:1 ltr 10. Vacuum:60% 11. Inlet Size:1/4"BSP 12. Tank Capacity: 0.75 ltr.

194


AC / Fluid / Oil Brake & Clutch Vacuum Bleeder 0XAT2028 1. Inlet Size: 1/4"BSP 2. Simple, one man operation using standard workshop air supply (90-120psi). 3. Does not require specialised brake reservoir caps. 4. Draws fluid from the bleed nipple enabling either bleeding or full replacement of fluid in system. 5. Air Supply: 90-120psi / Air Consumption: 180 ltr/min 6. Vacuum: 60% 7. Tank Capacity: 1 ltr 8. Inlet Size: 1/4"BSP 9. Tank capacity: 0.75 letter.

Brake & Clutch Bleeding System 0XAT2050 1. One-man brake and clutch bleeding the professional way. 2. Bleeding requires no external power source-simply fill and pump. 3. Reservoir holds 2.5ltr of hydraulic fluid-flush the entire system with one fill without the risk of running the reservoir dry. 4. Pressure range makes unit suitable for use with ABS systems. 5. Fitted with ø42mm cap and suitable for most European models.

Brake Cleaner & Chemical Sprayer 0XAT2082 1. Reduce the chances of brake dust getting airborne and help protect you and your workforce from the effects of brake dust inhalation. 2. Air operated brake cleaner device can be used remotely from air supply and its recycling function prolongs the life of the brake cleaning fluid. 3. Cranked neck makes this unit suitable for use under lift or next to ramps. 4. Fitted with four large castors for workshop mobility. 5. Simple to fill and empty. 6. Supplied with cleaning brush.

Pressure Brake Fluid Bleeder - 12 Volt 0XAT2069 1. Stainless steel body with European and universal adaptors. 2. Suitable for clutch bleed as well as brake bleed. 3. Portable and self-powered,compatible with ABS systems. 4. 12 volt powering with reverse polarity warning. 5. Peristaltic pump with automatic power off allows no direct contact between liquid, air and mobile parts of the pump.

195


AC / Fluid / Oil Mercedes Transmission Dipstick 4pc 0XAT1445 1. Transmission dipstick for checking the fluid level on Mercedes automatic transmissions, fitted to most Mercedes vehicles from 1996 to 2006. 2. The dipstick is a service tool, therefore must be removed after the fluid has been checked. 3. 0XAT1445-01 For Transmission Code: 722.6. 0XAT1445-02 For Transmission Code: 722.7, 722.8, 716.5. 0XAT1445-03 For Mercedes Motors: 103, 104, 111, 119, 120, 137, 603, 604, 605, 606, 611, 612, 613, 626, 913, 943, 963, 984, 985, 997. 0XAT1445-04 For Mercedes Motors: 112, 113, 646, 647, 648.

Audi 100 / A6 Transmission Dipstick 0XAT1447 For checking the Auto Transmission Fluid levels on Audi 100 vehicles

Oil Filter Pliers 0XAT1149 1. Forged pliers with chemically blackened finish 2. Serrated jaws and long handles for extra grip on oily filters 3. Features angled jaws, for use in confined engine bays 4. Dipped non-slip rubber grip handles for added comfort and control 5. 0XAT1149-01 Capacity: Ø54-108mm 0XAT1149-02 Capacity: Ø85-115mm

Differential Filter Spanner 46mm 0XAT4137 1. For removing and refitting differential filters fitted to Audi TT and Volkswagen Four Motion Golf and Passsat models 2. Complete with 5mm Hex Key

Multi-Purpose Oil Filter Locking Pliers 0XAT1498 1. Capacity: 2-1/8'' to 4-5/8''(53mm-118mm)range 2. Chrome vanadium steel 3. Drop forged jaws , heat-treated, nickel plated 4. Suitable for installing , removing and tightening objects of any shape 5. Locks onto the work with terrific grip

196


AC / Fluid / Oil Swivel Jaw Filter Pliers Ø57-120mm 0XAT1530 1. Jaws swivel up to 90º to give access to awkwardly positioned oil and fuel filters. 2. Chemically blackened finish to prevent corrosion and non-slip grip for added comfort and control.

Truck/Tractor HGV Oil Filter Pliers 0XAT1624 1. These Oil Filter Pliers range from 95mm to 178mm 2. Spring loaded with soft grip handles 3. Manufactured from forged medium carbon steel 4. 0XAT1624-14 - 14" Oil Filter Pliers 0XAT1624-18 - 18" Oil Filter Pliers

BENZ Oil Filter Wrench 74mm 0XAT1832 1. New Style Mercedes Oil Wrench 74MM with points (inside flats-flutes). 2. Mercedes M102,M103 etc 3. Mercedes 102 ,103,104,111,112,113,119,120,611 4. Mercedes 190E2.3 1985-1993 5. Mercedes 190E2.6 1987-1993 6. Mercedes 260E 1987-1989 7. Mercedes 300CE 1988-1989 8. Mercedes 300E 2.6 11990-1992 9. Mercedes 300E 1986-1992 10. Mercedes 300E 4-Matic 1990-1993 11. Mercedes 300SEL 1988-1991 12. Mercedes 300TE Wagon 1988-1992 13. Mercedes 300TE 4-Matic Wagon 1990-1993 14. Other application:Audi, VW Golf,and new body Jetta, TDI(Disel) and the following gas vehicles; Passat,Golf and Jetta with 1.8 turbo and 2.0litre, Rabbit , Dasher Scirocco and New Beetle.

Mercedes Dodge Jeep Oil Filter Wrench 84mm 0XAT1833 1. 84mm x 14 point x 1/2" Drive socket specificalley designed for removing the oil filter housing on various engines when changing the oil and oil filter 2. Applicattion: 2007 Dodge Sprinter; 2007 Mercedes Benz E320; 2007 Jeep Cherokee with 30.L V6 diseal engine

197


AC / Fluid / Oil Oil Filter Key with Handle Ø76 mm 12 Ribs 0XAT1496 1. For Oil Filter Key with Ø 76 mm and 12 Ribs. 2. Allows quick and easy removal of seized oil filters.

Oil Filter Wrench Claw Type 0XAT1145 1. Satin chrome finish steel construction with 3/8" & 1/2"Sq drive. 2. Suitable for use with a 21mm(13/16")spanner. 3. Claws grip filter tighter as more torque is applied to wrench. 4. Capacity: Ø65-110mm

Oil Filter Wrench Claw Type 0XAT1146 1. Satin finished carbon steel construction with 3/8" & 1/2" Sq drive. 2. Suitable also for use with a 21mm spanner. 3. Claws grip filter tighter as more torque is applied. 4. Capacity: Ø63-103mm

Three-Leg Oil Fliter Wrench 0XAT1156 45-110MM

Band Type Oil Filter Wrench Ø112-145mm 0XAT1502 1. Band type filter wrench. 2. Steel strap with heavy-duty cast body and control knob. 3. Removes filters with minimal risk of damage. 4. Ideal for servicing newer vehicles or in case the filter needs to be refitted. 5. Capacity: Ø112-145mm

Two Way Oil Filter Wrench 0XAT1575 1. Designed to install and remove the oil filter easily and quickly. 2. Use with 3/8" Drive or 17mm wrench. 3. Two Way Oil Filter Wrench 0XAT1575-01 Range: 60-80mm 0XAT1575-02 Range: 80-115mm

198


AC / Fluid / Oil Oil Filter Band Wrench - Stainless Steel 0XAT1143 1. Stainless steel band wrench with 180º pivoting handle suitable for filters with limited access. 2. Swivel action tightens band on filter automatically. 3. Features comfort grip handle. 4. 0XAT1143-01- Capacity: Ø60-76mm 0XAT1143-02- Capacity: Ø73-85mm 0XAT1143-03- Capacity: Ø85-99mm 0XAT1143-04- Capacity: Ø95-111mm

Oil Filter Band Wrench 0XAT1342 1. Articulated filter wrench suitable for filters with limited access. 2. Swivel action tightens band on filter automatically. 3. PVC dipped handle. 4. 0XAT1342-01 Capacity: Ø60-73mm 0XAT1342-02 Capacity: Ø73-85mm 0XAT1342-03 Capacity: Ø85-95mm 0XAT1342-04 Capacity: Ø95-111mm 0XAT1342-05 Capacity: Ø110-120mm 0XAT1342-06 Capacity: Ø120-134mm

Heavy-Duty Oil Filter Wrench - Truck 0XAT1343 1. Wrenches are designed for high torque requirements of truck filters and used with ½" square drive tools. 2. They have 1-1/2"(35mm) wide bands for added strength and increased grip area. 3. 0XAT1343-01 Capacity: Ø105-120mm 0XAT1343-02 Capacity: Ø115-135mm 0XAT1343-03 Capacity: Ø125-145mm

3" Heavy-Duty Oil Filter Wrench - Truck 0XAT1452 1. Wrenches are designed for violent torque requirements of truck filters and used with ½'' square drive tools. 2. They vave 3''(75mm) wide bands for added strength and increased grip area. 3. 0XAT1452-01 Capacity: Ø105-125mm 0XAT1452-02 Capacity: Ø110-130mm 0XAT1452-03 Capacity: Ø120-140mm

Oil Filter Strap Wrench 1/2" Drive 0XAT1139 1. Square section satin finish steel body with 1/2" drive. 2. Body may be shortened by sawing, for jobs with tight access. 3. 50mm Nylon webbing strap. 4. Use with ratchet wrench 5. Capacity: Ø150mm

199


AC / Fluid / Oil Oil Filter Strap Wrench 0XAT1140 1. Satin finish cast steel body with 3/8" and 1/2"Sq drives. 2. Designed for use with ratchet wrench, also be used with a 21mm(13/16") spanner. 3. Extra wide nylon webbing strap. 4. Capacity: Ø300mm

Oil Filter Wrench - Strap Type 0XAT1614 1. Heavy duty strap filter wrench for removing oil filters 2. Self adjusting 3. Gives access in awkward areas 4. Ergonomic handle 5. Capacity: Φ60-260mm

Oil Filter Wrench - Strap Type 0XAT1614-01 1. Capacity: Φ60-140mm 2. Length: 9"

Oil Filter Chain Wrench 0XAT1590 1. Drop-forged Chrome Vanadium steel body with satin finish and hanging hole. 2. Capacity: Ø60-140mm

Heavy-Duty Oil Filter Chain Wrench 0XAT1591 1. Extended-pin chain and twin-claw body for positive and reliable chain retention. 2. Drop-forged steel body with satin finish and hanging hole. 3. Capacity: Φ60-140mm

Heavy-Duty Oil Filter Chain Wrench 0XAT1718 1. A heavy-duty chain wrench available for most type of oil filters. 2. Flexible handle for narrow space 3. 0XAT1718A Capacity: Ø60mm-Ø105mm Length of Chain: 350mm 0XAT1718B Capacity: Ø60mm-Ø160mm Length of Chain 500mm

200


AC / Fluid / Oil Oil Filter Chain Wrench 1/2"Drive 0XAT1613 1. Satin finished carbon steel body with 1/2" square drive for use with ratchet wrenches. 2. May also be used with a 20mm spanner. 3. Capacity: <Ø135mm

VAG Fuel Filter Cap Installation Tool 0XAT2802 - Special designed pattern press pad allowing for direct mounting of fuel filter caps on fuel filters on UFI filters and some MANN+HUMMEL with bigger flange for VAG. - Applications: VW-Audi, Seat and Škoda Diesel vehicles with UFI fuel filter unit.

Oil Filter Cap Wrench Set 7pc, 6 Point 0XAT1014 1. Cap type filter wrenches with satin chrome finish. 2. Low profile design for removing paper cartridge style oil filters commonly 3. Fitted to Vauxhall/Opel Vectra,Mercedes and VW. 4. Use with 3/8" or 1/2" drive wrenches. 5. Contents:24mm, 27mm, 30mm,32mm, 36mm, 38mm 6. Adaptor: 3/8" Drive(M)x 1/2" Drive(F)

Oil Filter Cap Wrench Set 15pcs 0XAT1104 Contents & Sizes: 1- 65mm x 14 Flute / 1- 65/67mm x 14 Flute 1- 68mm x 14 Flute / 1- 73mm x 14 Flute 1- 74/76mm x 15 Flute / 1- 75/77mm x 15 Flute 1- 76mm x 14 Flute / 1- 76mm x 30 Flute 1- 80mm x 15 Flute / 1- 80/82mm x 15 Flute 1- 90mm x 15 Flute / 1- 93mm x 15 Flute 1- 93mm x 36 Flute / 1- 100mm x 15 Flute 1- Adaptor 3/8"M x 1/2"F

Oil Filter Wrench Set - Renault 0XAT1199 1. Cup style oil filter set compiled for Renault dCi engines. 2. For Renault 1.5 / 1.9 / 2.2 /2.5 engines. 3. Sizes: 27mm x 6 flutes;76mm x 12 flutes;96mm x 18 flutes. 4. Use on Vauxhall/Opel and Nissan models.

201


AC / Fluid / Oil Oil Filter Cap Wrench Set 13pcs 0XAT1208 1. Size & Applications: 1- 66mm x 6 flute Fiat / Renault 1- 76mm x 8 flute Fait / Lancia 1- 76mm x 12 flute Fait / Renault 1- 86mm x 16 flute Volvo 1- 86mm x 18 flute Audi / Renault / VW 1- 92mm x 10 flute Fait / Lancia / Volvo 1- 93mm x 45 flute Audi / VW 1- 96mm x 18 flute Audi / Renault 1- 106mm x 15 flute Fait 1- 108mm x 18 flute Renault 2. Includes: - 1/2"(F) x 3/8"(M) adap tor - 3 legge d oil filter tool - 11 Filter Cap Wrenc hes

Oil Filter Cap Wrench Set 9pc, 1/2" Drive 0XAT1250 1. For loosening and tightening oil filter, petrol filter and air filter housing whilst changing oil 2. Includes strap wrench and 21mm cup wrench 3. Applications: Fiat; Ducato 2.5D/TD, Iveco,MAN; L2000, F2000, TGA, Mercedes; Actros BR500, Atego 4. Contents: 36mm x 6 flutes, 76mm x 14flutes, 106mm x 15 flutes, 170mm x 15 flutes, 108mm x 15 flutes, 108mm x 18 flutes, 135mm x 18 flutes, 21mm Cup Wrench, 5. Strap Wrench: 160mm

Oil Filter Cap Wrench Set 30pc 0XAT1256 1. Designed to grip like sockets, thereby minimising the possibility of crushed filters 2. Includes adjustable oil filter wrench 3. Adaptor allows use with 3/8" or 1/2" drive wrenches 4. Claw Wrench: O65-120mm 5. Adaptor 3/8"Dr. x 1/2Dr 6. Applications: Alfa Romeo, VW/Audi, BMW,Daihatsu, Fait, Ford, GM, Honda, Lancia, Lexus, Mazda, Mercedes,Benz, Mitsubishi, Nissan, Opel, Renault, Porsche, etc.

202


AC / Fluid / Oil Oil Filter Socket 46mm 0XAT1320-46 1. Suitable for the operation of the filter housing cap when replacing the ad blue filter on Mercedes-Benz commercial vehicles with blue TEC engines 2. Applications: Actros; Atego; Axor; Econic

Oil Filter Wrench Toyota 3/8"Drive 64.5mm 0XAT1341 1. An Oil Filter Wrench suitable for use on Toyota | Lexus 3.5L V6 Engines 2. Designed for use on Toyota (07-08) 3.5L V6 and Lexus GS300 (06-) IS250(2006-) IS350(2006-) ES350(2007-) GS350(2007-) GS450H(2007-) LS460(2007-)RX350(2007-) LS600H(2008-) 3. Removes filters without damage to the filter housing 4. Oil Filter Wrench Size: 64.5mm x 14 flutes

Oil Filter Socket Key ½" Drive - VW/Audi 0XAT1490 1. Oil filter wrench key suitable for VAG diesel engines. 2. 42mm diameter. 3. Ideal for use where space is restricted. 4. For diesel engines fitted with Mann Mahle and Knecht filters.

Oil Filter Remover VAG 3/8" Drive 0XAT1491 1. Specially designed for use on VAG 10 cylinder diesel engines 2. Suitable for the Touareg and Phaeton 3. Size: 97mm x 9 Flutes 4. Can also be used with 32mm spanner

Oil Filter Wrench 74mm x 14 flutes 0XAT1494-03 1. An 74mm x 14 flutes aluminium filter wrench in 1/2" drive 2. Use on Audi/BMW/Citroën/Fiat/Ford/Lancia/Mazda/ Nissan/ Peugeot/Mercedes-Benz/Renault/Suzuki/Toyota/ Vauxhall/Opel and Volkswagen

Oil Filter Wrench 3/8" Drive - Toyota 0XAT1713 1. Manufactured from aluminium 2. 3/8"D or 24mm spanner 3. Fits most new models fitted with 1800cc and 200cc engines including Prius and Corolla 4. 14 flutes x 64.5mm with 6 slots 5. Features 6 slot design specific to Toyota filters

203


AC / Fluid / Oil Low Profile Oil Filter Socket Set 3/8" Drive 0XAT1321 1. Low profile design enables use on cartridge style filters 2. Made from Chrome Vanadium 3. Application: BMW Mini / BMW / Mercedes-Benz A Class / Vauxhall Vectra2.0 / Astra-G / Corsa-B / Zafira / Ford / Volkswagen VR6 / Audi 4. 0XAT1321-01- Includes sizes 27-32-36mm 0XAT1321-02 4pc set- Includes sizes 27-32-36 & 38mm 0XAT1321-03 5pc set- Includes sizes 24-27-32-36 & 38mm 0XAT1321-04 6pc set- Includes sizes 24-27-29-32-38mm 0XAT1321-05 7pc set- Includes sizes 24-27-29-30-32-38mm

Aluminum Oil Filter Cap Wrench 24pc 0XAT1799 1. Light weight for durable of 1/2" Square or H27mm Hex wrench. 2. Size Qty Size Qty Size Qty SW64mm SW75mm SW73mm SM73mm SM91mm SM91mm SM86mm

14P 15P 14P 15P 15P 12P 14P

SW67mm SW74mm SM73mm SM84mm SM92mm SM76mm SM91mm

14P 8P 30P 18P 15P 12P 15P

SW74mm SW74mm SM79mm SM89mm SM95mm SM79mm SM101mm

14P 15P 15P 15P 15P 15P 15P

Transmission Oil Filler Adaptor Kit 0XAT4089-01 1. Conjunction with Sealey Transmission Oil Filling System (Model No. 0XAT4089). 2. Contains automatic transmission oil adaptors 3. Suitable for Audi, Mercedes and VW vehicles. 4. Applications: - Mercedes M12 Thread: 722.9 Gearbox - VW/Audi M22 Thread: CVT (Continuously Variable Transmission) - VW/Audi M24 Thread: DSG (Direct-Shift Gearbox

Drain Plug Key Set 14pc, 3/8" Drive 0XAT1234 1. For draining differentials, sumps, axles and gearboxes on most modern vehicles 2. Includes: - Hex 8/9/10/12/14/17mm - Square 7/8/11/13mm & 3/8" & 5/16" - Female Square 10mm - Triangular

204


AC / Fluid / Oil Drain Plug Key Set 18pc, 3/8" Drive 0XAT1236 1. For draining differentials,sumps, axles and gearboxes on most modern vehicles 2. Includes: - 6pc Hex 8/9/10/12/14/17mm - 9pc Square 7/8/10/11/12/13/14mm/5/16" & 3/8" - Female Square 10mm - Triangular 10mm - Spline M16 with tamper

Drain Plug Key Set 3/8" Drive, 18pc 0XAT1518 1. Quality set of drain plug keys complete in a blow moulded case 2. Contents: - Hex bits: 8mm, 9mm, 10mm,12mm, 14mm, 17mm - Square bits: 7mm, 8mm,10mm, 11mm, 12mm,13mm, 14mm, 5/16" and 3/8" - Triangle: 10mm - Socket: 10mm - 3/8" Drive Sliding T - Bar

Drain Plug Key Master Set-23pcs 0XAT2580 This master drain plug key set is applicable for almost vehicles in market. 6pcs Hex Socket: 13/14/17/18/19/21mm (Magnetic) 7pcs Hex Bits: H 8/9/10/12/13/14/17 (Magnetic) 6pcs Square Bits: S 8/9.5/10/10.5/11/13.1 (Magnetic) 1pc Star: T45 (Magnetic) 1pc Square Socket: 10mm (No Magnet) 1pc Triangle Bit: 10mm (No Magnet) 1pc XZN Temper Proof: M16 (No Magnet)

Drain Plug Thread Repair Set, 12pc 0XAT8001 Kit includes: 1 x Tap M14x1.5 / 1 x thread borer 5 x Threaded Plugs / 5 x Washers

Drain Plug Thread Repair Set 64pc 0XAT8004 1. Superb for repairing sump, gearbox and differential drain plug threads 2. Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer 3. Suitable for the most popular threads used on cars and light commercial vehicles 4. Tap Sizes:M13x1.5P, M15x1.5P,M17x1.5P, M20x1.5P

205


AC / Fluid / Oil Drain Plug Thread Repair Set 114pc 0XAT8004L 1. Superb for repairing sump,gearbox and differential drain plug threads 2. Used to tap the damaged thread slightly oversize, then fit a new drain plug and washer 3. Tap Sizes: M13x1.25P, M13x1.5P,M15x1.5P, M17x1.5P,M20x1.5P, M22x1.5P

Oil Sump Repair Kit 7pc 0XAT8011 Superb for repairing sump, gearbox and differential drain plug threads Item No.

Tap Size

0XAT8011-01 M13x1.25P 0XAT8011-02 M13x1.5P 0XAT8011-03 M15x1.5P

Item No.

Tap Size

0XAT8011-04 M17x1.5P 0XAT8011-05 M20x1.5P 0XAT8011-06 M22x1.5P

8 in 1 Drain Plug Wrench 0XAT1503 1. Drain plug wrench with 8 sizes on one tool 2. Sizes: - Square 8mm / 10mm / 3/8" / ½" - Hex 10mm / 12mm / 14mm / 17mm

Oil Drain Plug Wrench 0XAT1506

- 10mmx10mm

0XAT1507

- 8mmx10mm

0XAT1508

- 12mmx10mm

1. For the oil filler and oid drain plug gearbox, differential, oil pan on various French passenger cars. 2. Length: 0XAT1506-280mm 0XAT1507-220mm 0XAT1508-215mm

Brake & Fuel Line Bending Pliers 0XAT2093 1. Special shaped jaws bend 3/16", 1/4" brake and fuel lines without distortion 2. Forged steel construction with cushion grips

Brake Spring Pliers 0XAT2116 Suitable for MERCEDES A-CLASS (E.G. A140), CITROEN, RENAULT, PEUGEOT with LUCAS DRIM BRAKE on the rear AXLE.

206


AC / Fluid / Oil Tube Bender 3-in-1 Automotive 6, 8 & 10mm 0XAT2108 1. Suitable for most automotive applications. 2. Bends pipe without crushing walls. 3. Will bend Ø6, Ø8 and Ø10mm (Ø1/4", Ø5/16"and Ø3/8") tube up to 90°.

Pipe Bending Tool 0XAT2128 1. For tubes made of copper, brass, aluminum and soft steel. 2. 6mm, 4/4.75mm and 3mm.

Pipe Flaring Tool Kit 0XCT8004 1. Suitable for producing single and double flares on copper tubing 2. Design with integral flare press and locking-grip plier style pipe clamp make it suitable for on-vehicle use 3. Dies:3/16", 1/4", 5/16",3/8", 1/2

Brake Pipe Flaring Tool Kit 0XAT2111 1. For use in-situ on vehicle 2. Suitable for producing SAE(3/16"& 1/4") and DIN 45 degree (3/16" & 1/4") flares. 3. Capable of working on steel brake pipes. 4. Complete with reamer for de-burring.

On-Vehicle Hydraulic Pipe Flaring Tool Set 0XAT2112 1. Produces accurate automotive SAE ,DIN flares on 3/16" and 4.75mm pipes respectively. 2. Ideal for splicing in replacement sections of brake pipe on-vehicle. 3. Features a hydraulic ram which suitable for steel pipes. 4. Dies: 3/16" SAE, 4.75mm DIN

207


AC / Fluid / Oil Brake Flaring Tool Kit - Hand Held 0XAT2113 1. 3/16" SAE & 4.75mm DIN- for vehicle to produce single DIN & double SAE flares on thin walled aluminium copper and cupro nickel brake pipe. 2. 24mm hex drive punch bolt. 3. Handle can be screwed onto either side to best suit the available working space where access is restricted.

Brake Flaring Tool Set – Hydraulic 0XAT2114 1. Design to quicklyproduce high quality SAE and DIN flares on or off of the vehicle. 2. Works on Cupro-Nickel and Steel pipes as well as coated steel piping. 3. Incorporates the tools to flare 4.75mm,5mm and 6mm pipes by using the correctly sized die and punches.

Oil Pan Separator 0XAT1513 1. Breaks seals on engine sumps, transmissions or any difficult to separate gasket 2. Blade material SK5 blade, width 48mm 3. Tool body material S45c 4. Insert the knurled handle into the separator and joint with hammer

Replaceable oil pan separator and Clean Set 0XAT8107 Breaks gasket seals on engine pumps, transmissions or any difficult to separate gasket joints.

Oil Filter Drain Tube for VAG FSI 0XAT1633 1. Designed to attach to the oil filter housing on VAG FSI petrol engines. 2. Allows the filter housing to be drained before removal, preventing spillage. 3. Conjunction with a suitable oil drainer. 4. Tube Length: 500mm

Oil Filter Drain Tube & Bottle - VAG FSI 0XAT1635 1. Designed to attach to the oil filter housing on VAG FSI petrol engines. 2. Allows the filter housing to be drained before removal preventing spillage. 3. Features a control valve fitted to the bottle and hanging chain. 4. Capacity: 1ltr

208


AC / Fluid / Oil 500C.C. Dual Transfer Pump 0XAT8087 1 .Durable inlet and outlet valves. 2. Suitable for the transfer of many different liquid types. 3. Portable and easy to operate. 4. Ideal for use in many home, industrial and farm applications. 5. Capacity: 500cc.

Oil Gun 500cc 0XOT3020 1. Designed for all purpose quickly draining and filling device oil and other fluids for clutches, agricultural, and industrial chemical, additives, transmission on differentials, brake master cylinders, oil filters or other type of sumps or sampling engine oil. 2. Features 12" plastic hose and durable corrosion resistant finish.

3L Axle Oil Drain Pan - For Trucks & Trailers 0XAT9082 1. Comes in black color only. 2. Fits rims with 13-3/4" I. D. and larger. 3. Made of Polypropylene. 4. Capacity: 3L (107oz)

Axle Oil Drain Pan 0XAT9082A 1. Easy seat on wheel frame for draining axle oil when repairing. 2. Special designed balance bolts to adjust it for the best position on wheel frame. 3. Optional extra 2 bolt boxes 4. Optional 2 strong magnets on bottom to help stand on wheel frame 5. Capacity: 2.2L

Measuring Oil Jug With Rigid Spout & Thumb Lid 0XAT2500 1. Material is Polyethylene (PE) and resistant from Oil, Fuel and most Battery Acid. 2. Rigid spout to help user pour liquid precisely. 3. Easy to hold from one hand and using thumb opening lid to control fluid speed on 2/4/5/6 litters model . 4. Screw vent cap and mouth cap to make 11 litter jug as a container, to ensure safer when storage, handling of liquid, preventing spillages. 5. Scales on these jugs are for indication purposes only and are not 100% accuracy. 6. Capacity: 2/ 4/ 5/ 6/ 11L 7. Each size has 2 spouts of Short & Long neck Item No. 0XAT2500-2S 0XAT2500-4S 0XAT2500-5S 0XAT2500-6S 0XAT2500-AS

209

capacity 2L-Short Neck 4L-Short Neck 5L-Short Neck 6L-Short Neck 11L-Short Neck

Item No. 0XAT2500-2L 0XAT2500-4L 0XAT2500-5L 0XAT2500-6L 0XAT2500-AL

capacity 2L-Long Neck 4L-Long Neck 5L-Long Neck 6L-Long Neck 11L-Long Neck


AC / Fluid / Oil Oil/Fluid Drain Pan 7.6 ltr 0XAT2057 1. Made for the recovery of oil and antifreeze, keep workshop floor free from oily residue and aid return of oil to recycling containers with minimum risk of spills or splashes. 2. These pans are suitable for parts cleaning operations with emulsifiable solvents 3. Prevent overflow or spillage. 4. Capacity: 7.6 ltr 5. Dimension:520x390x150mm

Oil/Fluid Drain Pan 17 ltr 0XAT2058 1. Made from high-density polyethylene with UV stabiliser. 2. Heavy-wall construction stays rigid, even with hot oil. 3. Excess capacity helps prevent overflow or spillage. 4. Large handles are positioned to aid carrying and pouring. 5. Capacity: 17 ltr 6. Dimension: 600x450x180mm

Oil/Fluid Drain Pan 24 ltr 0XAT2060 1. For recovery of oil and antifreeze, these pans keep the workshop floor free from oily residue and aid return of oil to recycling containers with minimum risk of spills or splashes. 2. Suitable for parts cleaning operations with emulsifiable solvents 3. Helps prevent overflow or spillage. 4. Capacity: 24 ltr 5. Dimension:820x540x200mm

Oil Drum Drain Pan for 205 ltr Drum 0XAT2072 1. Designed to collect unused oil into a 200L (55 Gallon) drum 2. The drain pan sit on top of drum perfectly 3. Built-in filter grids of draining mouth fits into the bung hole to collect unused oil into the oil drum 4. Capacity: 20L 5. Weight: 1.7kg 6. Diameter: 600mm 7. Heigh: 150mm

5 Liter Beaker 0XAT2127 Size: D19.1 x H27.2 cm Color: Clear Material: Plastic Shipping Weight: 50 gm

210


AC / Fluid / Oil Oil/Fluid Drain & Recycling Container 45 Ltr 0XAT2137 1. Capacity: 45 Ltr 2. Dimension: 885 x 495 x 188mm

Oil Drain Pan & Recycling Container 8 Ltr 0XAT2051 1. Have a boad appeal and are suitable for both DIT user and professional mechanic. 2. Purpose made for the recovery of oil and anti-freeze. 3. Capacity: 8 ltr

Low Profile Fluid Receiver 0XAT2052 1. Designed for waste ďŹ&#x201A;uid receiving during repairing jobs. 2. Very low proďŹ le which can slide under passenger car easily. 3. With covered splash net to prevent spillage and splash. 4. Strong construction for heavy duty use. 5. 4 casters installed provide best maneuverability. 6. Capacity: 30 ltr

Oil Drain Pan & Recycling Container 10 ltr 0XAT2055 1. Have a boad appeal and are suitable for both the DIT user and professional mechanic. 2. Purpose made for the recovery of oil and anti-freeze. 3. Capacity: 10 ltr

Oil Drain Pan & Recycling Container 5 ltr 0XAT2056 1. Suitable for both DIT user and professional mechanic. 2. Purpose made for recovery of oil and anti-freeze. 3. Capacity: 5 ltr

211


SUSPENSION Clutch Alignment Tool Set 17pc 0XAT4057 1. Essential for clutch installation on virtually all cars and light-duty trucks. 2. Aligns clutch plate properly by using tapered cones and pilot adapters. 3. Includes seven fractional pilot adapters, one clutch disc centering adapter and one alignment shaft. 4. Includes five metric pilot adapters, two clutch disc centering adapters and one alignment shaft.

Metric Clutch Alignment Tool 0XAT4246 1. For faster, easier replacement or repair of metric clutches. 2. Consists of the shaft, ten pilot bushings and two plate alignment cones with graduated turned diameters for "automatic" fit of metric clutch plates. 3. A tapered cone to fit all others is provided

Universal Clutch Alignment Tool Kit 9pc 0XAT4247 1. Aligns the clutch disc when replacing the assembly 2. For single plate clutches and for use on flywheels with centre pilot bearing 3. Includes cone adaptor for sizes over 25mm 4. AT4247-01 Metric Size - Adaptor Sizes: 15/16/17/1920/21 & 25mm

Dual Mass Flywheel (DMF) Measuring Tool Set 0XAT8715 - Suitable for testing of freeplay angle and the clearance on dual mass flywheel (DMF) - A checking of the flywheel is recommend because a worn or defective DMF can damage the new clutch - Test can be performed directly on the vehicles if the clutch has been removed - Includes: - 2 different claws for locking the flywheel - angular disc with holder - dial indicator with holder - assembly / measuring bolt - twist lever

SAC Clutch Alignment Tool Kit 0XAT4067 1. For assembling and fitting self adjusting clutches. 2. Used on: Audi, BMW, Fiat,Mercedes-Benz, Renault, Vauxhall/Opel and Volvo. 3. 48 pieces for ensuring the correct tool is available 4. Use with 3 and 4 fixing points and maintains adaptor ring in correct position.

212


SUSPENSION Universal Clutch Alignment Tool 0XAT4150 1. Suitable for easy alignment of single plate clutch. 2. Also suitable for flywheels with no pilot bearing 3. Size of collets: 14mm to 28mm across 3 adaptors.

BMW Self Adjusting Clutch Tool 0XAT4304 1. Install and set all self adjusting clutches (SAC). 2. 0XAT4302 BMW Self Adjusting Clutch Fixture 3. Applications:BMW - E36 / E38 / E39 / E46 / E52 / E53 / E85 4. 0XAT4303 Centering Tool for Self Adjusting

Universal Clutch Alignment Tool Kit 11pc 0XAT4232 1. For fast and exact clutch plate centering on vehicles with clutch guide bearing 2. Suitable for most of vehicles 3. Contents: - Clutch Aligner Ø15- Ø19 mm - Clutch Aligner Φ20 - Φ26.6mm - Clutch Aligner Ø23 - Ø36 mm - Sleeve Ø12,14,15,16,17,18,19,20 mm

Clutch Alignment Tool Kit 7pc 0XAT4233 1. For fast and exact clutch plate centering on vehicles with clutch guide bearing 2. Suitable for Transporter and small lorries with hub Ø23-Ø35mm, especially Renault. 3. Contents: - Clutch Aligner Ø23 - Ø35 mm - Sleeve Ø15, 16, 17, 18, 19, 20 mm

Clutch Centring Mandrels 2pc Set 0XAT4244 1. Two piece set of centring mandrels for clutches. 2. Adjustable from 15-19mm and 20-26mm 3. Knurled screw expands diameter to fit most modern cars

213


SUSPENSION Universal Clutch Alignment Tool Kit 0XAT4245 1. The vehicles equipped with latemodel front wheel drives without pilot bear in flywheel 2. Size: small cone 14.4~21 mm, large cone 20.9~29 mm 3. Includes sleeve Ø12,14,15,16,17, 18,19,20 mm

CV Boot Installation Tool Kit 0XAT4063 1. Designed for fast & efficient installation of uni-fit boots on to the CV joint. 2. The metal tip of the cone is for placing in a vise. 3. Apply lubricant to the cone then stretch the boot, to the end of the cone. 4. Finally place over the CV joint to fit boot into place. 5. Length: 16" (410mm)

CV Boot Band Pliers 0XAT4077 1. CV Boot band pliers with 3/8” torque drive for Volkswagen/Audi/Vauxhall/Opel/Ford and others. 2. Fitting stainless steel bands on drive shafts where a torque setting is specified.

Professional CV Joint Boot Installation Tool Air Powered 0XAT4151 - CE Approved - Professional tool for stretching of flexible rubber CV boots on automatic drive shaft assemblies - When a CV boot or gaiter is split instead of dismantling the front axle and drive shaft assembly, simply use this tool for accurate and time/labor saving. - The diameter of CV joints should be in the range of 20mm - 110mm. - Installs flexible steering and CV boots without removing axle from the vehicle or the CV joint from the axle - Composite body with simple control valve. - Suitable for cars/ small vans and light commercial vehicles. - Works from a 1/4" BSP inlet attached to the rear end of the tool - SPECIFIC SPECIFICATIONS CV joint diameter - 20mm - 110mm Working pressure 5 - 8 bar (72-113 psi / 5-8kg/m2) Maximum air pressure - 9 Bar (125 psi / 9kg/m2) Air inlet 1/4" BSP (standard size)

214


SUSPENSION CV Joint Puller Attachment 0XAT4122 1. Suitable for the removal of most car and light commercial constant velocity joints. 2. Use with slide hammer

CV Boot lnstallation Tool 0XAT4132 1. Composite cone with steel core. 2. Enables installation of CVJ boot without splitting drive train.

CV Joint Boot & Hose Earless Clamp Cutter 0XAT4133 1. Offset cutter designed for easy removal of stainless steel CV Joint Clips and hose clamps without damage to the boot or hose 2. Profiled jaws prevents band slipping whilst being cut 3. Maxium Capacity: 0.7mm Thick x 10mm Wide

CV Joint Boot/Hose Earless Clamp Pliers 0XAT4134 1. Steel jaws with formed handles for extra comfort. 2. Suitable for all earless type CV Joint boot clamps. 3. Length: 235mm

CV Joint Removal Tool - Ø29mm main hole 0XAT4189 1. Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing r etaining circlip. 2. Reduces risk of damage to transmission. 3. Saves on labour time and suitable for vehicles 4. Main hole size for shaft threads: Ø29mm

CV Dust Boot Clamp Installer with Cutter 0XAT4040 1. Essential for fixing CV boots. 2. With a built in cutter and winding mechanism the banding can be tightened and cut quickly and effectively

215


SUSPENSION CV Boot/Hose Clip Pliers - Ear Type 0XAT1128 1. Formed steel arms with insulated vinyl handles 2. Suitable for ear-type hose clips found on fuel, cooling system and vacuum hoses 3. Used for securing CVJ boot clips

CV Joint Boot/ Hose Clamp Pliers Ear Type 0XAT4185 1. Steel jaws with PVC coated handles for added comfort 2. Each handle features a 1/2"Sq drive for use with a torque wrench and breaker bar where vehicle maker demands speciďŹ c band tensions 3. Suitable for all ear-type CVJ boot clamps/ clips

Drive Shaft Circlip Squeezing Pliers 0XAT4601 - Easy tool to help user squeezing circlip on drive shaft in seconds. - To pre-tension the drive-shaft circlip during assembly of the outer constant velocity joint. - By holding the drive-shaft circlip with the special circlip pliers, the outer drive-shaft splines can be easily assembled onto the CV Joint. - Applications : VW-Audi, Ford, Honda, Mazda, Mitsubishi, Nissan, Opel / Vauxhall, Seat, Ĺ koda, Subaru, Suzuki, Toyota, etc.

Front End Service Tool Set 5pc 0XAT4226 1. Allows easy removal of most popular types of pitman arms, tie rods, and ball joints. 2. Press type ball joint separator allows for ball joint removal without damage to boots and other parts. 3. Content: - Pitman Arm/ Tie Rod End Puller - Ball Joint Separator - Pitman Arm Puller - Ball Joint/ Tie Rod End Remover - Tie Rod/ Inner Bearing Race Puller

Universal Knuckle Spreader Master Tool Kit 0XAT4277 1. Suitable for removal and installation of spring and shock strut from steering knuckle. 2. Prevents expensive damage to alumininum or cast iron steering hubs. 3. For spreading the clamp on lower ball joints. 4. Wide range of vehicle applications.

216


SUSPENSION Steering Knuckle Spreader Tool for Audi / VW 0XAT4299 1. Spread the steering knuckle 2. Enable the removal and reďŹ tting of shock absorbers without the risk of damage to the aluminium or cast iron knuckle 3. Suitable for steering knuckles with either a centralised slot or a non centralised slot. 4. Applications: Strut clamping bores on - Audi, VW

Universal Knuckle Spreader Tool Kit 0XAT4301 1. Spread the steering knuckle 2. Enable the removal and reďŹ tting of shock absorbers without the risk of damage to the aluminium or cast iron knuckle. 3. For steering knuckles with either a centralised slot or a non centralised slot. 4. Applications: Strut clamping bores on -Audi, BMW, Citroen, Ford, Peugeot, Renault, Seat, Skoda, VW

Real Bush Removal Tools Ford KA/FIESTA 0XAT4004 For the removal and installation of the rear bushes on Ford Fiesta and Ka from 1996 onwards without removing the suspension trailing link

Rear Bush Tool - Ford Focus 0XAT4051 1. Remove/install rear sub-frame bushes on Ford Focus 2. Can be used in-situ-no need to remove sub-frame from vehicle 3. Applications: Ford: Focus MK 11998~2004

Bush Removal / Installation Tool Kit - GM Vectra 0XAT4059 1. Tool kit for removing/installing upper and lower rear trailing arm bushes on GM Vectra 2. Bushes are easily pressed in or out with tool and a 19mm ratchet wrench

Track Control Arm Bush Tool - VAG 0XAT4044 1. Fine pitch thread with thrust bearing enables the rear bush to be removed from the front track control arm 2. Applications: Skoda Fabia / Seat models/ VW Polo III

217


SUSPENSION Bush Removal Tool - Ford Mondeo 0XAT4052 1. Remove/Install rear sub-frame bushes in Mondeo 2. Can be used in situ - no need to remove sub-frame from vehicle 3. Applications: Ford; Mondeo (2001on)

Bush Removal Tool - Renault Laguna 0XAT4053 1. Remove/Install front mounting bushes in Laguna rear sub-frame 2. Can be used in situ - no need to remove sub-frame from vehicle 3. Applications: Renault; Laguna (2001-2007)

Rear Bush Installation Tool - VW Golf IV Audi A3 0XAT4054 1. Hardened & tempered chrome vanadium steel 2. Suitable for in-situ installation of the rear axle mounting bushes on selected VW and Audi vehicles 3. Use with ratchet wrench or spanner

Rear Trailing Arm Bush Tool - BMW 3 series 0XAT4055 1. Use on rear trailing arm bushes (33321097009) as fitted to BMW 3 series models - E36 E46 & E46 Compact models 2. Suitable for removing original bushes, removing & installing new "SLOTTED" bushes - in situ without removing the rear trailing arm 3. Removed/inserted without removing trailing arm from vehicle

Rear Subframe Bush Tool - BMW E395 series 0XAT4060 1. Use on rear axle carrier bushes (33311091422) as BMW E39 5 series saloons 2. Features a fine pitch thread and thrust bearing enable the rear subframe bushes to be removed/inserted without removing rear subframe assembly from vehicle

Rear Ball Joint Installation/Removal Tool - BMW 5 & 7 series 0XAT4062 1. For in-situ to remove & install rear press fit ball joints as used on BMW 5 series (E39) and 7 series (E38) models - OEM # 33326767748 2. Used with ratchet wrench or spanner

218


SUSPENSION Rear Subframe Bush Tool - BMW 5 Touring 0XAT4065 For rear axle carrier bushes (33311094036) as use on BMW 5 series Touring models (E38 / E39)

Rear Subframe Bush Tool - BMW X5 0XAT4066 For use on rear axle carrier bushes (33311093662) as used on BMW X5 series models

Rear Axle Bush Tool - Ford Fiesta IV 0XAT4086 1. Remove/install Fiesta IV rear axle mounting bushes 2. Can be used in situ - no need to remove trailing link assembly from vehicle 3. Application: Ford Fiesta IV (1996 on), KA

Bush Extractor - BMW 0XAT4136 1. Used for R & R of rear wheel bearing located in wheel carrier 2. Application: BMW E36, E30, E46

Suspension Bush Tool -Volkswagen Polo 2002 0XAT4191 1. Special tool for replacing the front suspension bushes on Volkswagen Polo from 2002 onwards. 2. Replacements are available for the Bolt and Bar which are considered consumable.

Subframe Bush Remover - Ford Mondeo 0XAT4195 A specially designed tool for removing and installing the rear subframe on Ford Mondeo

219


SUSPENSION Universal Press Tool Kit with Hydraulic Spindle and Press Frame 0XAT4230 1. Suitable for most of European & Japanese cars 2. Allows quick, easy and safe extraction and replacement in bushing, bearings & seals, etc. 3. Contents: 1 - Hydraulic Spindle / 1 - Press Frame 4 - Pulling Spindle / 4 - Fixing Spindle 1 - Connect Bush / 2 - Point Bush 28 & 95mm long 22 - 110mm long Press Sleeve 22 - 40mm long Press Sleeve

Bearing, Bush Removal/Insertion Tool Kit 27pc 0XAT4231 1. Comprehensive kit for fast and effective in-situ removal/installation of wheel bearings, suspension bushes and seals 2. Reduces the possibility of damaging the bearing/suspension housings. 3. Supplied with twenty two adaptors from 44 to 90mm and five force screws in carry-case 4. Adaptors can also be used in a standard workshop press when in-situ access isn’t possible 5. Adaptor Wall Thickness: 5mm 6. Adaptor Height: 60mm 7. External Adaptor Diameter: 44, 46, 48, 50, 52, 54, 58, 60, 62, 64, 66, 68, 70, 72, 74, 76, 78, 80, 82, 85, 90mm 8. Force Screw Threads: 10x1.5, 12x1.5, 14x1.5, 16x1.5, 18x1.5mm 9. Force Screw Lenght:350mm 10. NEVER ALLOWED FOR USING IMPACT TOOLS

8pc VW Polo Bush Extractor Kit 0XAT4236 1. The removal and replacement of the silent bloc placed in dir bracket is easily and safely carried out directly on vehicle 2. Applications: VW Polo 9N, Seat Ibiza 4, Seat Cordoba (2002), Seat Altea, Skoda Fabia, Skoda Roomster and Audi A2 front-axle bracket wishbone silent blocs

Front Lower Control Arm Ball Joint Extractor 0XAT4111 1. Use to remove and install lower ball joint support on the wishbone 2. On car maintenance 3. Applications: Mercedes Benz W124, W129, W201

220


SUSPENSION Pitman Arm Puller 0XAT4031 1. Adjustable with special replaceable forged jaws 2. Two clamp bolts lock jaws on Pitman arm 3. Can perform other pulling jobs 4. Services cars and light trucks to 3/4-ton

Heavy-Duty Duty Pitman Arm Puller 0XAT4031A 1. Works on 2005 and newer Ford F-250 and F-350 four-wheel-drive Super Duty trucks 2. Allows Pitman arm to be removed from the steering gear while the steering gear is still in the vehicle 3. Two clamp bolts lock the jaws on the Pitman arm, ensuring a solid grip 4. Maximum jaw spread is 3-1/4"

Pitman Arm Puller 0XAT4038 1. 3/8in.-drive square port in center screw 2. 1-5/16in. (33mm) opening 3. 2-1/2 in. (63mm) pull travel

Pitman Arm/Tie Rod End Puller 0XAT4061 1. Be used as a Pitman arm remover for many rear wheel drive on most of vehicles, or as a tie rod end puller for vehicles 2. The jaws, with a spread of 1", give a positive grip in tight work places

Tie Rod/Pitman Arm Adjusting Set 0XAT4090 1. Consists of one Pitman arm and four tie rod tools. 2. Used with 1/2" drive ratchet or breaker bar. 3. Set includes four tie rod adjusting tools for compact cars with 3/4|dia. 4. The cars with 7/8"dia. light cars with 1-1/8" dia. 5. Adjusting sleeves and Ford 3/4&1 ton trucks with 1-13/16"dia. 6. Adjusting sleeve, one Pitman arm adjusting tool for Ford cars with 1-7/16"dia.

221


SUSPENSION Track-Rod Adjusting Tool 0XAT4295 1. For loosening and adjusting stubborn Track-Rods. 2. The broad serrated jaws prevent damage to the Track-Rod 3. AT4295-01 Adaptor for Track-Rods Ø9-23mm AT4295-02 Adaptor for track-rods Ø40-55 mm.

Wishbone Lever Tool 0XAT4239 1. Push down the wishbon e and other suspension parts, e.g. during disassembly of the drive shaft, and replacing the gaiter or exchange of wheel bearing 2. After loosening the ball joint the wishbone must in most cases be pushed down against the bush or stabilizer tension, in order to pull the joint from the support

4pcs Subframe Locating Pin Set 0XAT4377 1. 4 locating pins for precisely aligned mounting of the subframe 2. M12 compatible withVW Scirocco (09)‚ EOS(06)‚ Golf(09)‚ Golf Plus(05)‚ Jetta(4-06)‚ Polo(02)‚ Fox(06)‚ Passat(06)‚ Passat CL(09)‚ Audi A3(04)‚ TT(07) & A4(01) 3. OEM : T10096

Brake Cylinder Retainer Tool 0XAT2036 1. This tool is design for holding the retainer ring for easy cylinder removal and replacement, making the job easier and quicker. 2. Orginally designed as a tool to remove the tab-type retaining clip on American GM brake cylinder assembly. 3. Suitable for removal and installation of locking rings on drive shafts when removing CVJ. 4. Replaceable tips allow use on other circlip applications.

Brake Drum Wear Gauge 0XAT2034 1. Measures drum wear to ensure within manufacturer’s tolerance 2. Aids quick set-up of shoe/drum clearance prior to re-installation of drum 3. Measures drums from 165 to 292mm (6-1/2" to 11-1/2") 4. Dual Imperial and Metric scale 5. Knurled locking action

Brake Lining Gauge 0XAT2048 1. Gauge measures bonded brake lining from 0 to 1/2" in 1/64" graduations. 2. Place gauge over brake shoe to take reading.

222


SUSPENSION Brake Lining Thickness Gauge 0XAT2117 1. Color coded brake gauge indentify thickness levels for brake lining inspection 2. All gauges fastened together for ease of use 3. All steel construction 4. Sizes: - Metric Gauges - 8mm, 10mm and 12mm (Green), 4mm,5mm and 6mm (Yellow),2 and 3mm (Red) - SAE Gauges - .3150 to .4720"(Green), .1575 to .2382" (Yellow),and .0787 to .1181" (Red)

Handbrake Cable Spring Pliers 0XAT2022 1. For quick and easy removal and installation of the handbrake cable by compressing the retaining spring. 2. For compressing the retaining spring. 3. Use on Audi / BMW / Citroën / Nissan / Peugeot / Renault /Rover / Seat / Volkswagen. 4. Knurled grip handles.

Drum Brake Spring Washer Tool 0XAT2160 1. Special designed offset jaws to enable easy access to the hold-down spring cap located behind wheel hubs. 2. This toll can removal or instal the cap easily whitout need to remove hub. 3. Universal application for nearly all drum brakes 4. Special neck angle provides easy removaland installation of brake spring washer

Brake Shoe Spring Pliers 0XAT2038 1. Purpose for the installation and removal of drum shoe return springs 2. Use for removal & installation of spring from anchor stud. 3. Suitable for most car and light commercial drum brakes.

Brake Shoe Adjuster 0XAT2075M 1. Use on hydraulic braking systems. 2. Adjusts the clearance between the brake drum and shoe. 3. Lever the brake shoe to adjust the mechanical adjuster or through slots in backing plate to turn the star wheel type adjuster. 4. Suitable for cars and light commercial vehicles.

Brake Shoe Spring Pliers 0XAT2098 1. Spring loaded pliers for easy removal of brake shoe arm. 2. Compresses spring, eliminating pinched fingers and frees hand for replacing brake shoe lever.

223


SUSPENSION Truck Brake Spring Plier 0XAT2044 1. Remove and install the brake shoe return springs 2. Use on medium-duty and heavy-duty drum brakes

Brake Shoe Spring Hook Tool 0XAT2047 1. Manufactured from heat treated alloy steel. 2. Designed for installation and removal of drum brake shoe springs.

Parking Brake Tool - Mercedes 0XAT2062 1. T-shape design allows easy installation and removal of Mercedes parking brake spring. 2. Suitable for cylindrical and conical shaped springs 3. Length: 122mm

Brake spring Pliers 0XAT2100 For attaching or detaching the retracting springs of drum brakes with riveted brake - shoes on cars.

Brake Return Spring Tool 0XAT2123 1. Designed for import car drum brake return springs. 2. Removes and installs return springs, also works on the brakes that don't use an anchor pin. 3. Engage brake spring tool head, turn handle to lock on spring, expand spring to install or remove.

Brake Spring Washer Tool Double End 0XAT2129 1. Aid installation and removal of large and small T-slot anti-rattle washers found in drum brake assembly. 2. Features large viewing cut-away to allow correct alignment of washer. 3. Simple push and twist action.

Brake Service Tool Kit 3pc 0XAT2133 1. Includes: Brake Return Spring Pliers, Brake Shoe Adjuster & Universal Brake Spring Washer Tool. 2. This quality purpose made brake tool set is for the professional mechanic to take various parts of the brake apart. Kit includes: 1 x Brake Spring Pliers 1 x Brake Spring Pliers 1 x Universal Brake Shoe

224


SUSPENSION Master Brake Service Tool Set 15pc 0XAT2134 1. Contents: - Brake Spring Pliers / - Brake Spring Tool - GM-Ford Disc Brake Piston Tool / - Drum Brake Adjusting Tool - Heavy-Duty Brake Pad Separator / - Caliper Socket Bits - Brake Spring Tool / - Disc Brake Piston Tool 2. Hex: 1/4", 3/8", 7mm, 8mm & 10mm 3. Torx: T40, T45, T50

Brake Service Tool Kit 8pc 0XAT2135 Includes: Spring Compressor; BrakeSpring Installer; Spring RemovalTool; Brake Retaining SpringTool; Brake SpringPliers; Two Brake Adjustment Spoons; Mini Brake Adjustment Spoon

Disc Brake Pad Puller 0XAT2024 1. Aids quick removal of disc brake pads. 2. Especially useful where brakes have bound and extraction by hand is diďŹ&#x192;cult. 3. Insert pins in pad and use mini slide hammer to ease pad from calliper.

Brake Pad Remover with Slide Hammer 0XAT2042 1. Used to remove stubborn brake pads 2. Includes a slide hammer, jaw with 4.0mm pins and jaw with 5.9mm pins 3. Overall length: 250 mm

Disc Brake Pad Spreader 0XAT2043 1. For standard and 4 piston disc brakes 2. Use on ATE / Bendix / Delco / Girling brake calipers 3. Quick and easy to use

Disc Brake Piston Spreader Tool 0XAT2025 1. Retracting the brake piston to allow insertion of new brake pads. 2. Suitable for ATE, Bendix, Delco and Girling callipers. 3. Fitted with tommy bar but can be used ith 1/2"drive ratchet wrench or spanner 4. Maximum Spread: 80mm 5. Applications: Alfa, Audi, Fiat,Ford, Nissan, Peugeot, Renault, Rover,Vauxhall/Opel,VW (Porsche)

225


SUSPENSION Brake Caliper Wind Back Kit 13pc 0XAT2006 1. This comprehensive set of piston rewind adaptors and force screw is essential when servicing the brakes on a wide range of vehicles. 2. Use with 'Push back' and 'Wind back' pistons the set 3. Includes adaptors for : Mazda,Toyota, General Motors,Audi,Ford, Honda, Jaguar, Nissan, Saab, Subaru, VW, Alfa Romeo,BMW, Mercedes, Mitsubishi,Rover, Volvo and Renault 4. Set includes 12 adaptors andreaction plate. 5. 2 pin ďŹ xed Drive. 6. Right hand threaded screw and T-bar.

Brake Piston W Brake Caliper Wind Back Kit 30pc 0XAT2007 1. Updated master set of adaptors suit a wide range of vehicle applications. 2. Suitable for push-back and wind-back brake pistons. 3. Includes left- and right-handed thrust bolt assemblies. 4. Left-handed thrust bolt required for Ford, Citroen and Renault applications. 5. Precision made adaptor plates with thrust bolt assembly and reaction plate. 6. Prevent damage to pistons and seals. 7. Applications: Alfa Romeo, Audi,BMW, Citroen, Fiat, Ford, Honda, Jaguar, Lancia, Lincoln, Mazda, Mini,Mitsubishi, Nissan, Peugeot, Proton, Renault, Rover, Saab, Seat, Subaru, Toyota, Vauxhall/Opel, VW, Volvo

Brake Caliper Wind Back Kit 40pc 0XAT2013 1. 40pc brake rewind kit for use with left and right hand brake piston-caliper wind back 2. Contents: 24 adaptors and caliper keys left and right threaded rewind tools - 6mm and 7mm hex keys, - 3mm and 5mm pin punches, - 4 special reaction plates 3. Sutible for: Alfa romeo; Audi;Austin; BMW; Citroen; Ford; GM; Honda; Jaguar; Mazda; Mercedes; Mitsubishi; Nissan/Opel/Renault; Rover; Saab; Subaru; Toyota; Volkswagen

226


SUSPENSION Brake Wind Tools 50pcs 0XAT2014 Finish: PH Zinc

Pneumatic Brake Caliper Rewind Tool 0XAT2016 1. Use with pneumatic/air tools 2. For brake caliper wind back tools with either pin type or 3/8" drives

Air Operated Brake Piston Wind -Back Tool Kit 16pc 0XAT2017 1. Air operated wind back tool suitable for left or right hand wind back operations. 2. Fast, lightweight and easy to use. 3. Includes 15pc of adaptors suit a wide range of vehicle applications. 4. Suitable for push-back and wind-back brake pistons. 5. Left-handed thrust required for Ford, Citroen and Renault applications. 6. Interchangeable adaptor plates with thrust bolt assembly and reaction plate.

Brake Piston Wind -Back Tool Kit 18pc 0XAT2021 1. Suitable for push-back and wind-back brake pistons. 2. Includes left-handed and right-handed thrust bolt assemblies. 3. Left-handed thrust bolt required for Ford, Citroen and Renault applications. 4. Adaptor plates with thrust bolt assembly and reaction plate. 5. Helps prevent damage to pistons and seals. 6. Updated adaptor set suitable for a wide variety of UK vehicles. 7. Applications: Alfa Romeo,Audi, BMW, Citroen, Fiat,Ford, Honda, Jaguar, Mazda, Mercedes,Mitsubishi, Nissan, Opel,Peugeot, Renault, Rover, Saab,Seat, Skoda, Subaru, Toyota,Vauxhall/Opel, VW, Volvo

227


SUSPENSION Brake Piston Cube 3/8" Drive 0XAT2035 1. Suitable for vehicles with discs all round. 2. Retracts parking brake piston prior to in installation of new pads. 3. Five possible pin configurations, fit US and European applications. 4. Use with 3/8 drive ratchet wrench and extension bar

Brake Piston Wind-Back Tool with Double Adaptor 0XAT2041 1. Enables retraction of piston as fitted to 2. Collette type brake callipers allowing new brake pads to be installed 3. Double end tool 4. Pin Diameter: 6mm 5. Distance Between Pin Centres: 22, 33mm

Brake Disc Calliper 0-50mm 0XAT2085 1. Stainless steel calliper suitable for accurate measurement of brake disc thickness. 2. Floating jaw assembly enables easy removal of calliper from disc while retaining reading. 3. Metric scale with 0.1mm graduations. 4. Range: 0-50mm

Digital Brake Disc Calliper 100mm (4") 0XAT2086 1. Hardened and tempered stainless steel gauge. 2. 11mm High figures in LCD display for ease of reading. 3. Metric or Imperial read-out with ‘Hold’ function. 4. Zero setting control allows for comparative measurement. 5. Includes serial port connection for computer interface. 6. Range:0-100mm/0-4" 7. Resolution:0.01mm/0.0005" 8. Accuracy:±0.02mm/0.001" 9. Battery:SR44 - 1.5V

Brake Adjusting Socket Set - Pentagon (5 points) 0XAT2077A This set is specifically used for Bendix, Girling and Smart Car brakes. Both bit and socket set for complete service of male and female pentagon bold on machine. Size: 1/2"dr.10mm pentagon bit socket x 55mm L 1/2"dr.10mm pentagon socket x 38mm L 1/2"dr.14mm pentagon socket x 38mm L 1/2"dr.19mm pentagon socket x 38mm L Material: Socket: Cr-V / Bit: S2

228


SUSPENSION Brake Calliper Thread Repair Kit 0XAT2070 1. For New VAG Since 2009 2. Calliper Insert Thread Size: SUS303 M12x1.5

Brake Caliper Guide Thread Repair Kit 0XAT2071 1. Complete with a titanium coated core drill, tap and 10 threaded inserts 2. Suitable for: Volkswagen Audi Group / Opel / Vauxhall / Ford 3. Calliper Insert Thread Size: M9x1.25mm

Special Nut Socket Set ½" Drive 5pc - Mercedes 0XAT4288 1. Use on Mercedes Benz differentials, front axles, wheel bearings, rear axle drive flange 2. Applications: G Class W460/W461/463/W116/W123/W107/W114/ W115/W116

Brake Adjustment Socket -12.5mm x 5 Point 0XAT2094 Hardened & Tempered chrome vanadium steel

Bush Installer/Remover Tool Kit 0XAT4077 1. Intended for rapid removal/installation of Vauxhall/ Opel Vectra (95-02) upper and lower rear trailing arm bushes. 2. Bushes are quickly pressed in or out with tool and a 19mm ratchet wrench 3. Application: Vauxhall/Opel; Vectra (95-02)

Universal Ball Joint Separator 0XAT4011 1. Special designed for removing the ball pivots on steering arms, steering rocks, steering knuckles. etc. 2. Jaw Capacity: 30mm (1-3/16")

229


SUSPENSION Ball Joint Remover 0XAT4013 1. Chrome-plated finish drop-forged steel body with thrust bolt. 2. Suitable for most small cars and light vans. 3. Jaw Capacity: 19mm

Ball Joint Removal Tool 0XAT4014 1. Chrome-plated finish drop-forged steel body with thrust bolt 2. Suitable for small cars and light vans 3. Jaw Capacity: 17mm

Ball Joint Separator - Scissor Type 0XAT4018 1. More adjustable than existing products. 2. Ideal for splitting track rod ends, anti-roll bar mountings 3. Scissor type heavy duty 4. Wider range for track rod ends 5. 0XAT4018-01 - Jaw Capacity: 18mm 0XAT4018-02 - Jaw Capacity: 20mm 0XAT4018-03 - Jaw Capacity: 22mm 0XAT4018-04 - Jaw Capacity: 32mm 0XAT4018-05 - Jaw Capacity: 45mm

Ball Joint Separator -Two Step Adjustable 0XAT4029 1. Use to separate the ball joint from the spindle support arm. 2. Works on most of vehicles 3. Adjustable from 50mm to 80mm for different size 4. Jaw Capacity:18 - 24mm 5. Working Area Pusher:50 - 80mm

Ball Joint Separator - Two Step Adjustable 0XAT4030 1. Separate the ball joint from the spindle support arm. 2. Works on most of vehicles 3. Adjustable from 30mm to 50mm for different size 4. Ball Joint Separator - Two Step Adjustable 5. Jaw Capacity:18 - 24mm 6. Working Area Pusher:30 - 50mm

230


SUSPENSION Ball Joint Tie Rod End Remover 0XAT4017 1. Use on most of autos and light trucks to remove ball joint from connecting links. 2. Constructed of drop-forged steel for long-lasting strength and durability. 3. 0XAT4017-01- Fork size: 19mm (16"),Length: 400mm 0XAT4017-02- Fork size: 24mm (12"),Length: 300mm

Ball Joint Separator Kit 5pc 0XAT4015 1. Interchangeable shafts for use with ball pein hammer or air hammer 2. Three forged steel forks 3. Suitable for most small cars and light commercials 4. Set Includes: - Tie Rod Spreader /18mm - Ball Joint Separator / 24mm - Pitman Arm Wedge / 29mm

Ball Joint Removal Set 3pc 0XAT4081 1. Low profile set suitable for most modern vehicles. 2. Three sizes of jaw allow use on most cars and light commercial vehicles. 3. Features heavy-duty forged steel body and hardened screw with thrust ball. 4. Supplied in carry-case. 5. 0XAT4081-01 Jaw Capacity: 23mm 0XAT4081-02 Jaw Capacity: 28mm 0XAT4081-03 Jaw Capacity: 34mm

Master Ball Joint Separator Set 5pc 0XAT4118 1. Contents & Sizes: 1 - Length: 295mm(11-5/8"); Opening: 28.5mm(1-1/8") 1- Length: 295mm(11-5/8"); Opening: 41.3mm(1-5/8") 1- Length: 295mm(11-5/8"); Opening: 36.6mm(1-7/16") 1- Length: 395mm(15-9/16"); Opening: 18mm(11/16") 1- Length: 395mm(15-9/16"); Opening: 24mm(15/16") 2. Separating most types of pitman arms, tie rods and ball joints found on automotive and light truck appliactions 3. Complete coverage set featuring five different sizes, including separators for late model vehicles pickups

BMW Ball Joint Separator 24mm 0XAT4205 1. For splitting track-rod end, anti-roll bar mountings, ball joints. 2. Fits most models BMW, especially in confined space conditions like on BMW (E39).

231


SUSPENSION Adjustable Fork Ball Joint Seperator 0XAT4238 1. Suitable for cars and light commercial vehicles 2. Allows the tool to be used on a large range of ball joints, tie rods and suspension linkages. 3. The jaws adjust from 18-42mm and are manufactured from Drop Forged Chrome Vanadium.

Quick-change Ball Joint Remover Kit 0XAT4278 1. Innovative quick change and simple action for suitable fork 2. Enable operator to select correct jaw size without taking entire extractor to the vehicle 3. Adjustable opening angle 4. Jaw opening: 20, 22, 24, 27,30 mm 5. Thrust Screw Length: 100 mm 6. Pivot Rod Length: 125 mm

Ball Joint Separator, 4 Position Adjustable 0XAT4285 1. Professional ball joint separator with 4 position, adjustable lever. 2. Hardened & tempered drop-forged steel with chrome plated. 3. Lever adjustment in 24, 30, 40, 45 mm 4. Jaw opening: 20 mm 5. Total length: 165 mm

BMW Rear Ball Joint Tool 0XAT4045 1. Remove and install press-ďŹ t rear suspension ball joints in situ, on BMW 5 and 7 Series 2. Joints are referred to as 'bushes' but are true ball joints 3. Applications: BMW; 5 Series E39, 7 Series E38

Hydraulic Ball Joint Separator, 8 Ton 0XAT4216 1. Hydraulic ball joint separator 2. Size of Jaw: Opening= 56mm, Width= 22mm, Depth= 30mm 3. Forged body from alloy steel 4. Capacity of jaw: 8 ton Max.

Ball Joint Splitter Hydraulic & Manual - HGV 0XAT4258 1. Heavy-duty ball joint splitter suitable for HGV vehicles. 2. Designed to be operated manually or by 12tonne hydraulic ram supplied. 3. Features a step down thread adaptor that allows ďŹ tting of the manual thrust screw or hydraulic ram. 4. Jaw Capacity: 35mm 5. Jaw Opening: 100mm

232


SUSPENSION Hydraulic HGV Ball Joint Separator 0XAT4258-01 1. Jaw Width:36mm 2. Opening Capacity:70mm 3. 12Ton.

Ball Joint Splitter Hydraulic/Manual - HGV 0XAT4273 1. With a hydraulic ram and jaws manufactured from chromemolybdenum forged steel for strength 2. Supplied in a blow moulded case for storage 3. Jaw sizes: 30mm/34mm/40mm

Hydraulic Ball Joint Installer/Remover Kit - BMW 0XAT4276 1. Essential time and money saver, remove and install press-ďŹ t control arm ball joints on BMW 3 Series E36 vehicles 2. Use in situ, there is no requirement to remove the control arm from the vehicle 3. Includes: - Hydraulic ball joint press frame (OEM 31 1 441) - 2pc Removal tools ( OEM 31 1 445/6) - 2pc Installation tools (OEM 31 1 447/8)

Hydraulic Press Tool Kit 0XAT4188 1. Can easily and quickly be pressed into and out of the lower wishbone 2. To remove/install the ball joint directly on vehicle without to dismantle the wishbone 3. Applications: Mercedes W163 (M-Class) front axle/rear axle, W211 (E-Class), W220 (S-Class), W124, W201 (190 series) front axle

Commercial Vehicle Ball Joint Remover 30mm 0XAT4102 1. Commercial vehicle ball joint extractor use on light trucks. 2. Suitable for : BMW (E39), Mercedes-Benz W203 / W211 / W210 / W220 / W221 3. Can also help with the removal of the Track Rod End 4. Arm and light truck ball joints 5. Size: 30mm

233


SUSPENSION Universal Ball Joint Remover - 18mm 0XAT4139 1. The jaw can be aligned by a targeted hammer blow 2. Stud and spindle recess in the pressure arm provide a good hold 3. Capacity: 18mm 4. Working area pusher: 0 - 37mm

Universal Ball Joint Remover - 20mm 0XAT4140 1. Special steel for removing the ball pivots on steering arms, steering tie rocks,steering knuckles,etc. 2. Jaw capacity:20mm.

Ball Joint Extractors 0XAT4224 1. For quickly and easy separation of ball joint connections 2. 0XAT4224-01 - Opening: 18mm 0XAT4224-02 - Opening: 23mm 0XAT4224-03 - Opening: 29mm 0XAT4224-04 - Opening: 40mm 0XAT4224-05 - Opening: 46mm

Mercedes Ball Joint Remover/Installer Kit 0XAT4035 1. Special designed ball joint remover installer for Mercedes Benz. 2. 25 Ton C-frame press for removing and installing the ball joint into the steering knuckle on Mercedes Benz vehicles. 3. Puller Length: 10"(255mm) 4. Application: W220 S Class

Lower Ball Joint Remover / Installer for Mercedes 0XAT4047 1. Designed for Mercedes-Benz W220/W211/W230 2. Removes and installs the lower ball joints whilst in-situ without removing parts 3. For extraction and installation 4. Applications: Mercedes-Benz W220/W211/W230

Ball Joint Removal/Installation Tool Set 0XAT4094 1. Removes and installs press-ďŹ t parts such as ball joints, universal joints, and truck brake anchor pins 2. Contains: 1- Cframe press 1- Installing adaptor 1- Removing adaptor 3- Receiver tubes: 2-3/4"I.D. x 3"O.D.;2-1/4"I.D. x 2-1/2"O.D.; 1-3/4"I.D. x 2"O.D

234


SUSPENSION Master Ball Joint Adapter Set 0XAT4114 1. Includes receiver tubes and removing installing adapters needed to work on most GM, Ford, and Dodge two-and four-wheel drive vehicles,through 1997. 2. Works on press-fit upper and lower ball joints. 3. Set also includes a live centre forcing screw plug.

Lower Ball Joint Socket Peugeot 405/Citroen 0XAT4121 1. 35mm Hex drive with Ø19mm internal clearance for OEM and non OEM fittings. 2. Ø50mm Ring with drive pegs which locate in slots cut in the ball joint flange. 3. Suitable for Peugeot 405 and Citroen lower ball joints.

Lower Ball Joint Socket Set 2pc 0XAT4124 1. Set of two heat treated alloy steel sockets. 2. Suitable for removal of OEM and aftermarket lower ball joints on Peugeot and Citroen vehicles. 3. Applications: Peugeot; 405, 406, 407, 605,607, Citroen; Xantia,C5, C6

Pin Wrench Tool ½" Drive - Mercedes M-Class 0XAT4113 1. To secure the retaining ring during R&R of ball joints 2. Applications: Mercedes Benz W163/W164 M-Class lower ball joint of front & rear axles

VAG Front Wheel Bearing Removal - 72mm 0XAT4203 - Good for damage-free fitting and removal of GEN2 bearings units on all common VAG vehicles from Audi, Seat, Skoda and Volkswagen. - Bearing size: 72 mm - Suitable for: Audi A1 ( from year 2011) , Audi A2 ( built after 2000) , Seat Ibiza ( from 2002 ) - Contents: High strength ball bearing fitted spindles, 1 Pressure plate with 8 holes (122 mm in diameter, 18 mm in width)

Wheel Bearing Extractor Kit 0XAT4005 1. Comprehensive kit of tools for the fast and effective removal and installation of wheel bearings, installing hub on most of vehicles 2. Drift Sizes : 34, 35, 37, 39, 40, 41, 42,45, 60, 62, 64, 66, 68,72,74, 80, 82 & 84mm

235


SUSPENSION Seal Driver Set 18pc Composite 0XAT4034 1. Set of assorted seal drivers suitable for installation of seals without damage 2. Includes three hooded drivers for seals with dust shields 3. Contents: Driver Sizes : Flat; 33, 38, 41, 43, 49, 52, 54, 61.5, 65, 69.5, 76, 82, 85mm, Hooded; 62, 69.5, 88.5mm Driver Plate, Driver

Bearing Race & Seal Driver Set 10pc 0XAT4042 1. Set of nine aluminium bearing and seal drivers 2. Suitable for straight installation of bearing race without damage to the bearing race or axle housing 3. Fits most popular bearing race sizes 4. Driver Sizes : 39.5, 44.5, 50, 59, 63, 65, 72, 76, 81mm

Master Wheel Bearing Tool Set 0XAT4084 1. Suitable for wheel bearing diameter from Ø60mm-Ø85mm 2. For the precision & quick of removal and replacement of wheel bearing 3. Prevent damage to new wheel bearing, as the press pieces enable safe and accurate centering and aligment when changing wheel bearing 4. Suitable: VW/Audi, Seat, Ford, BMW, etc.

Pinion Bearing Race Driver Set - Trucks 0XAT4092 1. Provides a convenience way to steadily,quickly assemble and position the automobile tapered bearing in place 2. Driver sizes: 2-11/16"(68.3mm), 2-27/32"(72.2mm), 2-7/8"(73mm), 3"(76.2mm), 3-1/4"(82.6mm), 3-1/2"(88.9mm), 3-3/4"(95.3mm), 4-1/2"(114.3mm)

Pulling Device Tool Kit for Silentbloc 0XAT4259 1. Universally suitable for silentblocs or pivoting bearings with Ø40-71mm 2. Enables quick, safe, professional removal or replacement of silentblocs and pivoting bearings 3. The mechanical drive included in set enables pulling out of silentblocs and pivoting bearings as from a inner bore diameter of 10 mm

236


SUSPENSION Wheel Bearing Removal Tool Kit 0XAT4097 1. Comprehensive kit of tools for the fast and effective removal and installation of wheel bearings on front-wheel drive vehicles 2. Reduces chances of damage to hub and bearing 3. Suitable for removing and installing large industrial bearings 4. Drive Shaft: 32 & 38mm 5. Drift Sizes Ø: 50, 55, 60, 64, 67, 70, 72, 74, 75, 78, 82, 84, 88mm

Master Tool Set for Wheel Bearing - For Ø62/Ø66/Ø72/Ø85/mm 0XAT4267 1. For cars with: Ø62mm; Ø66mm; Ø72mm & Ø85mm wheel bearing 2. Applications: VW/Audi, Skoda; VW T5 and Touareg

Wheel Bearing Remover/Installer Kit - For Ø78mm Bearing 0XAT4268 1. Special design for cars with Ø78mm wheel bearing 2. Applications: Volvo

Bearing Positioning Tool Kit 37pc 0XAT4210 1. For positioning of be arings without damage to bearing or be aring cage 2. Use on location when servicing vehicles/machinery 3. Comprises dead blow hammer, three drift sleeves and 33 different-sized drifts to match individual bearings 4. Contents: 650g dead blow hammer 3 x bearing drift sleeves 33 x drifts sizes from 10-26mm to 50-110mm

Front Wheel Drive Bearing Kit 0XAT4010 1. Installation and removal of front hub bearings without the need to dismantle the steering knuckle and strut assembly 2. Suitable for most front wheel drive cars 3. Heavy-duty steel drifts with black phosphate finish for corrosion resistance 4. Drift Sizes Ø: 55.5, 59, 62, 65, 66, 71.5, 73, 78, 84, 86, 91mm 5. Hub Screws (3pc each): M12 x 1.5, M14 x 1.5mm

237


SUSPENSION Wheel Bearing Remover/Installer Kit 0XAT4316 1. For removing and installing the wheel hubs or bearing of built-in parts on cars. 2. For 62mm Diameter Bearing 3. Applications: VW/Audi, Skoda

Wheel Bearing Remover/Installer Kit 0XAT4317 1. For removing and installing the wheel hubs or bearing of built-in parts on cars. 2. For 66mm Diameter Bearing 3. Applications: VW/Audi, Skoda

Wheel Bearing Remover/Installer Kit 0XAT4318 1. For removing and installing the wheel hubs or bearing of built-in parts on cars. 2. For 72mm Diameter Bearing 3. Applications: VW/Audi, Skoda, Seat

Wheel Bearing Remover/Installer Kit 0XAT4319 1. For removing and installing the wheel hubs or bearing of built-in parts on cars. 2. For 85mm Diameter Bearing 3. Applications: VW T5 and Touareg

Wheel Bearing Remover/Installer Kit 0XAT4320 1. For removing and installing the wheel hubs or bearing of built-in parts on cars. 2. For 78mm Diameter Bearing 3. Applications: VW/Audi, Skoda

Blind Bearing Puller Set 10pc 0XAT4152 Content: 5pc x Clamps 8-11mm/12-17mm/18-23mm/24-29mm/30-34mm 3pc x Screws: M10x1.5P; M10x1.5P/M8x1.25P;M10x1.5P/M6x1.0P 1pc - Slide Hammer 1pc - Two Jaw Puller

238


SUSPENSION Blind Bearing Puller Set 15pc 0XAT4153 Content: 10pc x Clamps: 8-11mm/12-17mm/18-23mm/24-29mm/30-34mm/34-37mm/ 39-42mm/44-47mm/49-52mm/54-57mm 3pc x Screws: M10x1.5P/M8x1.25P; M10x1.5P/M6x1.0P 1pc - Slide Hammer 1pc - Two Jaw Puller

Blind Bearing Removal Tool Kit - Small 0XAT8027A 1. Suitable for removal of a variety of blind bearings where traditional bearing and gear pullers will not reach 2. Ball-end tips ďŹ t inside bearing races to provide traction for bearing extraction 3. Ideal for a wide variety of bearing sizes 4. Bearing Applications: 6004-6010; 6201-6206; 6300-6302

Blind Bearing Removal Tool Kit - Medium 0XAT8027B 1. This special pullers will remove blind housing bearing without the need to dismantle machinery or move the running shaft 2. Bearing Applications: 6207 - 6211; 6305 - 6308; 6403 - 6405

Blind Bearing Removal Tool Kit- Large 0XAT8027C SpeciďŹ cation: Adjust range:56mm-220mm Beraing range: (1) 6021 to 6032-15/17.4/20mm (2) 6212 to 6230-15/17.4/20/25.2mm (3) 6309 to 6321-17.4/20/25.2/30/36.4mm (4) 6406 to 6417-15/17.4/20/256.2/30/36.4mm

Blind Bearing Puller Set 5pcs 0XAT8033 1. Fully chromed carbon steel medium stroke slide hammer 2. 383mm overall length with 0.9kg hammer 3. Bearing extractor collets made from Chrome - Molybdenum steel 4. Collet Diameter:10-14mm,15-19mm,18-25mm,25-32mm

239


SUSPENSION 5 Pc Internal Bearing / Bush Extractor Set 0XAT4112 1. For tightly-fitting ball bearings, bearing races, bushings and shaft seals 2. To use with impact bearing extractor or support brace 3. Titanium-nitrided surface 4. Contents : 4pc Internal Extractors: Ø5-8.5mm; Ø8-15mm, Ø15-24mm; Ø25-36mm 1pc Sliding Hammer Puller / M10 connecting thread

Adjustable Wheel Bearing Lock Nut Tool 0XAT4282 1. Universal fitting, suitable for removing adjustable wheel bearing lock nuts found on commercial vehicles 2. Use with hexagonal and octagonal lock nuts those with or without locating pins

Universal Twin Leg Pullers 0XAT4155 1. Adjustable and reversible for internal and external pulling applications 2. 0XAT4155-01 - Spread: 90mm / Reach: 100mm 0XAT4155-02 - Spread: 130mm / Reach: 100mm 0XAT4155-03 - Spread: 160mm / Reach: 150mm 0XAT4155-04 - Spread: 200mm / Reach: 150mm 0XAT4155-05 - Spread: 250mm / Reach: 200mm

Quick-Release Universal Twin Leg Pullers 0XAT4156 1. For the safe and quick removal of pulleys, wheels, ball bearings, etc. 2. 0XAT4156-01 - Spread: 90mm / Reach:100mm 0XAT4156-02 - Spread: 130mm / Reach: 100mm 0XAT4156-03 - Spread: 160mm / Reach: 150mm 0XAT4156-04 - Spread: 200mm / Reach: 150mm 0XAT4156-05 - Spread: 250mm / Reach: 200mm

Universal Triple Leg Pullers 0XAT4157 1. Exchangeable legs for several clamping reaches available as accessories 2. Reversible legs for internal or external pulling 3. 0XAT4157-01 - Spread: 90mm / Reach:100mm 0XAT4157-02 - Spread: 130mm / Reach: 100mm 0XAT4157-03 - Spread: 160mm / Reach: 150mm 0XAT4157-04 - Spread: 200mm / Reach: 150mm 0XAT4157-05 - Spread: 250mm / Reach: 200mm

240


SUSPENSION Quick-Release Universal Triple Leg Pullers 0XAT4158 1. For the safe and quick removal of pulleys, wheels, ball bearings, etc. 2. 0XAT4158-01 - Spread: 90mm / Reach:100mm 0XAT4158-02 - Spread: 130mm / Reach: 100mm 0XAT4158-03 - Spread: 160mm / Reach: 150mm 0XAT4158-04 - Spread: 200mm / Reach: 150mm 0XAT4158-05 - Spread: 250mm / Reach: 200mm

Quick Action Gear Puller 2 & 3 Leg 0XAT4159 1. Twin/triple leg yoke with three drop-forged, Chrome Vanadium steel legs 2. Legs may be used for internal or external pulls 3. Spring-loaded mechanism allows fast leg changes 3. Removable thrust plate prevents damage to shaft end 4. 0XAT4159-01 - Spread: 75-100mm / Reach: 90mm 0XAT4159-02 - Spread: 75-175mm / Reach: 140mm

Two-Leg Reversible Pullers 0XAT4160 1. Twin leg puller with reversible, drop-forged, CR-V steel legs 2. Heat treated for added strength and chrome plated to resist corrosion 3. 0XAT4160-01 - Spread: 75mm / Reach: 65mm 0XAT4160-02 - Spread: 100mm / Reach: 112mm 0XAT4160-03 - Spread: 150mm / Reach: 175mm 0XAT4160-04 - Spread: 200mm / Reach: 260mm

Triple-Leg Reversible Pullers 0XAT4161 1. Triple leg puller with reversible, drop-forged, CR-V steel legs 2. Heat treated for added strength and chrome plated to resist corrosion 3. 0XAT4161-01 - Spread: 75mm / Reach: 65mm 0XAT4161-02 - Spread: 100mm / Reach: 112mm 0XAT4161-03 - Spread: 150mm / Reach: 175mm 0XAT4161-04 - Spread: 200mm / Reach: 260mm 0XAT4161-05 - Spread: 250mm / Reach: 280mm

Two / Triple-Leg Reversible Pullers 0XAT4182 1. Multi-purpose pulling set for internal and external pulls 2. Two-way yoke allows two or three-jaw pulls 3. 0XAT4182-01 - Spread: 100mm/ Reach: 100mm 0XAT4182-02 - Spread: 125mm/ Reach: 125mm 0XAT4182-03 - Spread: 150mm/ Reach: 150mm

241


SUSPENSION Universal Twin/Triple Arm Puller Set 0XAT8025 1. Hardened & tempered chrome-vanadium steel 2. With pulling legs for narrow spaces in different lengths 3. Contents: 1pc - Twin Arm Yoke (Reach 25-130mm) 1pc - Triple Arm Yoke (Reach 25-130mm) 3pc - Pulling Legs (200mm) 1pc - Forcing Screw(M14x1.5x140)

Universa l Twin Arm Puller Set - 100/200/250mm 0XAT8026 1. With pulling legs for narrow spaces in different lengths 2. Hardened & tempered chromevanadium steel 3. Contents: 1pc - Twin Arm Yoke (Reach 25-130mm) 2pc - Pulling Legs (100mm) 2pc - Pulling Legs (200mm) 2pc - Pulling Legs (250mm) 1pc - Forcing Screw(M14x1.5x140mm)

Twin/Triple Arm Puller Set - 200mm 0XAT8028 1. For puller off washers, gears or ball bearings. 2. These twin/triple arm universal pullers can be used as internal or external pullers. 3. The extremely narrow hooks feet are necessaty for gearbox repairs if pullers with conventional hooks cannot be interted for space reasons. 4. Contents: 3pc-100mm Pulling Legs, 1pc-Twin Arm Yoke, 1pc-Triple Arm Yoke, 1pc-Forcing Screw.

Micro Bearing Puller 0XAT8032 1. Applications: alternators, generators, domestic appliances, power tools and pumps 2. Self centering 3. Capacity: 1 ton 4. Spread: 19mm~45mm 5. Reach: 73mm

Twin/Triple Arm Puller Set 0XAT8041 Contents: 1pc - Twin Arm Yoke (Reach 25-130mm) 1pc - Triple Arm Yoke (Reach 25-130mm) 2pc - Pulling Legs (100mm) 2pc - Pulling Legs (200mm) 2pc - Pulling Legs (250mm) 1pc - Forcing Scre w(M14x1.5x 140mm) 1pc - Forcing Scre w(M14x1.5x 210mm)

242


SUSPENSION Universal Twin Arm Puller Set 0XAT8059 Contents : 1x Twin Arm Yoke ( Reach 25-130mm) 1x Pulling Legs (100/200/250mm), 1x Forcing Screw (M14x1.5x140mm)

Universal Twin-Leg Pullers 0XAT8072 0XAT8072-01- Spread: 15-80mm / Reach:100mm 0XAT8072-02- Spread: 15-120mm / Reach: 100mm 0XAT8072-03- Spread: 20-160mm / Reach: 150mm 0XAT8072-04- Spread: 20-200mm / Reach: 150mm 0XAT8072-05- Spread: 40-250mm / Reach: 200mm 0XAT8072-06- Spread: 40-350mm / Reach: 200mm

Universal 2-Arm Puller with Clamping Yoke 0XAT8073 1. For the removal of steering arm gears, ball bearing, etc. 2. Clamping device will press legs securely behind parts to be withdrawn 3. Especially for extracting the inner bearing ring at VW-Audi cars 4. Capacity: 90mm 5. Reach: 100mm

Universal Twin-Arm Pullers 0XAT8074 1. Ideal for conďŹ ned spaces 2. Legs are adjustable in the working depth Item Number Cpapcuty Reach Width of Legs 0XAT8074-01 6-100mm 70/85mm 23mm 0XAT8074-02 10-140mm 85/120mm 31mm 0XAT8074-03 15-140mm 125/155mm 31mm

Universal 2-Arm Pullers with Narrow Legs 0XAT8075 1. Ideal for conďŹ ned spaces 2. Legs are adjustable in the working depth Item Number Cpapcuty 0XAT8075-01 6-100mm 0XAT8075-02 10-140mm

243

Reach Width of Legs 70/85mm 23mm 85/120mm 31mm


SUSPENSION Triple Leg Self-Gripping Pullers 0XAT8076 1. Special self-gripping puller with slim legs 2. Can be used with slide hammer Item Number Spread 0XAT8076-01 10-80mm 0XAT8076-02 10-150mm 0XAT8076-03 15-200mm

Reach 90mm 150mm 200mm

Twin Leg Self-Gripping Pullers 0XAT8077 1. Special self-gripping puller with slim legs 2. Can be used with slide hammer Item Number Spread Reach 0XAT8077-01 10-80mm 90mm 0XAT8077-02 10-150mm 150mm 0XAT8077-03 15-200mm 200mm

Three Jaw Outside Pullers 0XAT8078 Item Number Spread 0XAT8078-01 7-140mm 0XAT8078-02 10-180mm 0XAT8078-03 20-250mm

Reach 150mm 200mm 250mm

Three Jaw Inside Pullers 0XAT8079 Item Number Spread 0XAT8079-01 60-135mm 0XAT8079-02 60-170mm

Reach 140mm 190mm

Long Reach Bearing Puller 0XAT8118 1. Long reach for access. 2. Manufactured from drop-forged alloy steel. 3. Self-centering. 4. Spread:10mm - 50mm 5. MAx. Reach: 300mm

244


SUSPENSION Axle Bearing Remover Set 3pc 0XAT4095 Rear axle bearing remover set is used to remove the rear axle bearing.

Universal Bearing Remover/Installer Kit 0XAT4250 1. Fast and effective removal and installation of wheel bearings 2. Reduces chances of damage to hub and bearing 3. Driver Shaft Sizes(270mmL): M10x1.5; M12x1.75; M14x2.0; M16x2.0 4. Drift Sizes: Plate A: Ø20/42/48/54/60/66/72mm Plate B: Ø36/42/48/54/61/66/72/78mm

Inner Bearing Race Puller Set 0XAT4187 1. Allows precise extraction of the inner Bearing Race from Wheel Hub 2. Can quick and easy removal of inner bearing races with diameter from 44mm to 72mm 3. Chuck Sizes/Applications: Ø44 -48mm / Lancia Cappa; Renault Ø48 -52mm / Ford Transit, T330 Ø52 -56mm / VW/ Audi; Seat; Skoda Ø56 -60mm / Mer cedes W168 Ø60 -64mm / Mer cedes W201, W202, W203, W210, W124, BMW; Peugeot Ø64 -68mm / Mer cedes W163, W140, W169, W21 , W220, W24 5, W12 4T Ø68 -72mm / VW Touareg; Porsche Cayenne

Mini Bearing Separator Set 0XAT4006 Contents: 1-Beam / 1-Separator 15-58mm / 2-50mm Jaws 1-Trust Screw / 2-30mm Extension

Bearing Separator 0XAT4162-01 1. Suitable for removing bearings, gears and bushes from shafts 2. Forged steel jaws 3. 0XAT4162-01 Capacity: Ø10-30mm 0XAT4162-02 Capacity: Ø30-50mm 0XAT4162-03 Capacity: Ø50-75mm 0XAT4162-04 Capacity: Ø75-105mm 0XAT4162-05 Capacity: Ø105-150mm

245


SUSPENSION Complete Removal And Installation Tool Set For The Compact Wheel Hub AT4307 new 1. Removal and installation the compact wheel hub/bearing unit on VW T5 Transporter 2. Contents: - 1 x Cross beam with threaded ring - 2 x Half shell set/Removal / - 2 x Tension bar set - 2 x Half shell set/Installation / - 2 x Half shell mount - 1 x Pressure piece/Removal - 1 x Pressure piece/Installation - 1 x Trapezium threaded spindle with 2 x thrust bearing + nut

Bearing Separator 0XAT4308 1. For new VAG models with wheel housings/hub unit 2. High time saving - faster execution at workshop press than at the vehicle ideally suited for Wheel bearing diameters 62mm / 66mm / 72mm (13" 14" 15" -undercarriages) 3. The extension of the wheel housing takes place by means of the available workshop facility 4. Application: VW-Polo new, Audi A2, Skoda Fabia, Seat Ibiza 5. Contents: Half shell coupling/nodized, for bearing Ø62mm Half shell coupling/chrome, for bearing Ø66mm Half shell coupling/black, for bearing Ø72mm Pressure bell universal Thrust bearing Gr. 66/72mm, Length 160mm Thrust bearing gr. 62mm, length 160mm Fixing screw 3pc x M12 x 1.5 Fixing screw 3pc x M14 x 1.5

Mechanical Bearing Separator Set 0XAT8034 1. Mechanical puller set with 30-50mm and 50-75mm separators and single yoke with 180mm thrust-bolt 2. Suitable for engineering, automotive, marine and agricultural applications 3. Contents: 2pc - Separators Ø30-50 mm & Ø50-75 mm 4pc - 130mm Exten sion Bars 4pc - 105mm Exten sion Bars 1pc - Thrust Bolt 180mm 1pc - Yoke 160mm

Universal Hub Puller 0XAT4019 1. Ductile steel electrodeposition finished body with thrust bolt and tommy bar 2. Suitable for four and five stud hubs 3. Use with a 1/2"drive ratchet wrench or with tommy bar supplied

246


SUSPENSION Mechanical Bearing Separator Set Ø75-105mm 0XAT8068 1. Mechanical puller set with 75-105mm separators and single yoke with thrust-bolt 2. Suitable for engineering, automotive, marine and agricultural applications 3. Contents: 1pc - Separators Ø75-105mm 4pc - 200mm Exte nsion Bars 1pc - Thrust Bolt 5/8" 1pc - Cross Bean

Mechanical Bearing Separator Set Ø120-150mm 0XAT8069 1. Suitable for pulling commercial vehicle size bearings from 120-150mm 2. Contents: 1pc - Separators Ø120-15 0mm 4pc - 250mm Exten sion Bars 1pc - Thrust Bolt 5/8" 1pc - Cross Bean

Hydraulic Puller Set 25pc 0XAT8038 Contents: 1pc - 10 ton Hydraulic Ram / 3pc - 100mm Leg 3pc - 150mm Leg / 3pc - 200mm Leg 1pc - Twin Head / 1pc - Triple Head 1pc - Ram Nut / 4pc - Main Rod 200mm 1pc - Beam / 1pc - Separator 75-105mm 1pc - Bolt 5/8" / 1pc - Ram Service Kit 2pc - Extension Rod: 25 x 50mm & 25 x 100mm

Twin/Triple Arm Hydraulic Puller Set 19pc 0XAT8040 1. Forged steel 2-way yoke allows twin or triple leg pulls, with 10ton Hydraulic power unit & tommy bar 2. Suitable for pulling hubs, flanges, gears and bearings 3. Three 3-position puller arms and three sets of extension plates 4. Size: Spread / Reach: 100mm 50-100 / 0-100mm 150mm 75-150 / 0-150mm 200mm 100-200 / 0-200mm 250mm 150-250 / 0-250mm

247


SUSPENSION Adjustable Bearing Race and Seal Driver Set 0XAT4378 1. 3 hardened adjustable jaws for seat races, bearings or seals installation easily. 2. Durable, sturdy aluminum construction, equipped with a steel capped striker shaft handle. - 0XAT4378A: 18~90mm (0.71”~3 35/64”) Step 1 : 18mm~53mm (0.708¡¨~2.086¡¨) Step 2 : 41mm~76mm (1.614¡§~2.992¡¨) Step 3 : 54mm~90mm (2.125¡¨~3.543¡¨) - 0XAT4378B: 9.5~50mm (3/8”~ 1 31/32”) Step 1 : 9.5mm~23.5mm (0.374¡¨~0.925¡¨) Step 2 : 23.5mm~36.5mm (0.925¡§~1.437¡¨) Step 3 : 36.5mm~50.0mm (1.437¡¨~1.968¡¨)

Hand Bearing Packer 0XAT8043 1. Self-contained bearing packer saves time and can be used anywhere. 2. No air line or grease gun required. 3. Packs 50 to 60 bearings without refilling. 4. Transparent, impact resistant cup allows grease level check. 5. Use on all cage-type roller and ball bearing up to 2" bore.

4 Wheel Drive Spindle Nut Socket 0XAT4101 1. This 2-lug wrench removes spindle nuts of 1988-95 Isuzu Trooper, Rodeo, Amigo, and pickups; 1985-89 Honda Passport; Jeep J20 pickups with Dana 60 Axle 2. It features uniquely designed lugs for manual operation not intended for use with an impact tool of any kind. 3. Use with 1/2" hand drive tool.

½ - 1 Ton 4WD Wheel Bearing Locknut Tool 0XAT4107 1. Removes and installs large diameter 4 slot front axle lock nuts 2. Use on 1/2-1 Ton Ford and GM cars and trucks 3. Heavy-duty alloy steel 4. Applications: 1982-1990 GM H.D. 3/4 and 1 Ton trucks 1985-1995 Ford F-series 1/2 Ton truck and full size Br

½ Ton 4WD Bearing Locknut Tool 0XAT4108 1. Removes and installs 4 slot front axle lock nuts 2. Reinforced outer lug sleeve for tough applications 3. Heavy-duty alloy steel 4. Use for ½ ton 4WD vehicles 5. Applications: 1960 to current 1/2 Ton Chevrolet and GMC 1966 to current Bronco and Blazer

248


SUSPENSION 3/4 - 1 Ton 4WD Wheel Bearing Locknut Tool 0XAT4142 1. Removes and installs 6 slot front axle lock nuts 2. Heavy-duty alloy steel 3. Use on 3/4 - 1 Ton Ford and GM cars and trucks 4. Applications: Dana 70 axles 1978 to current Ford 3/4 Ton vehicles 1973 to 1981 GM 3/4 Ton and 1 Ton vehicles

½ - 3/4 Ton 4WD Wheel Bearing Locknut Tool 0XAT4144 1. Removes and installs 4 slot front axle lock nuts 2. Heavy-duty alloy steel 3. Use on 1/2 - 3/4 Ton Ford and GM cars and trucks 4. Applications: 1986 to current Ford light trucks such as Bronco Bronco II and Ranger with Dana 44 axles

Tubular Spanner Wrench 0XAT4145 1. Six-lug spanner-type wrenches remove and install rear wheel bearing locknuts 2. They're built for use with a 3/4 inch square-drive ratchet or breaker bar 3. Socket O.D. is 2-7/8 inch 4. Designed for servicing Chevrolet and GMC 11,000 to 13,500 lb axles

Ratcheting Lock Nut Tool 0XAT4146 1. Double-sided ratcheting style lock nut 2. Small end fits Ford 1986 to 1994 light truck with Dana 44 front axle 3. Large end fits 1985 and newer 4. Ford F150-F350 trucks with Dana 44 rear axle 5. Use with ½" drive wrench

4 Lug Spindle Socket 0XAT4147 1. For use on 1982-1990 3/4 and 1 Ton GM Heavy duty trucks, 1985 to current 1/2 Ton Ford F-Series and full size Broncowith DANA 28 front axle, 1985-1/2 to current Ford F-250 Heavy duty truck, 1985-1/2 to current Ford F-350 4 X 4 , DANA 50 IF. 2. Sand Model 60 monobeam outer adjusting nut.

249


SUSPENSION Wheel Bearing Locknut Tool - Toyota 0XAT4186 1. Removes and installs wheel bearing locknuts 2. Heavy-duty construction for loading high torque 3. Use with ½" Dr. torque wrench 4. Works on: 1995 and newer Tacoma 1996 and newer T100 4 Runner

Drive Shaft Socket Set 6pc 1/2" Drive 0XAT4260 1. Specialist set of tools suitable for removal and adjustment of hubs, steering and suspension on most of vehicles 2. Contents: Hex Driver(43mmL): 14/17/19mm ½" Drive Bi-Hex Socket(85mmL): 30mm/32mm/36mm 3. Applications: VW/Audi, BMW, Mercedes, Ford, Citoren, Opel, Toyota, Nissan, etc.

Drive Shaft Socket Set 8pc 1/2" Drive 0XAT4261 1. Specialist set of tools suitable for removal and adjustment of hubs, steering and suspension on most of vehicles 2. Contents: Hex Driver(43mmL):14/17/19mm ½" Drive Bi-Hex Socket(85mmL): 30mm/32mm/34mm/ 35mm/36mm 3. Applications: VW/Audi, BMW, Mercedes,Ford, Citoren, Opel, Toyota, Nissan, GM, Mazda,etc.

Drive Shaft Puller/Extractor Set 7pc 0XAT4270 1. Designed for pulling drive shafts into hubs on: Audi, BMW,Fiat, Ford, Mercedes-Benz, Peugeot, Porsche, Renault,Subaru, Vauxhall/Opel and Volvo 2. Include: M16x 1.5 for Subaru, M20x1.5 for Volkswagen Beetle, Touareg and Porsche Cayenne, M22x 1.5 for BMW E30, M24x1.5 for BMW E36 and Mercedes-Benz W203, M27x 1.5 for BMW E32/E34/E38/E39/X5 M30x 1.5 for BMW E32/E36/E34

Hub Puller Set - 3 Leg 0XAT4048 1. Designed to fit four and five stud hubs, fitted to cars and light commercial vehicles 2. Unique design allows for the leg angle to change as the hub is being pulled 3. Force screw handle included

250


SUSPENSION Hub Puller Set - 5 Leg 0XAT4048A 1. Free moving legs mounted on a floating plunger, enable quick and easy attachment to vehicle hubs 2. Heavy-duty hammer type handle allows the application of sh ock force for rapid removal of sticking hubs

ydraulic/Mechanical Hub Puller Set - 5 Leg 0XAT4050 A versatile kit containing the 5 leg hydraulic puller set and havey-duty force screw with hammer type handle

Slide Hammer/Puller Set 10pc 0XAT4120 1. Use eight ways: external three- jaw puller, internal three-jaw puller, external two-jaw puller, internal two- jaw puller, grip wrench adaptor, lip puller, hub puller, dent puller 2. 2.5kg Slide hammer with 570mm shaft

Hub Puller Kit 0XAT4123 1. Use on most front wheel drive vehicles 2. Includes hub installer for Ford applications

Hub Puller 0XAT4141 1. Suitable for hubs with four stud fixing and stud centres of between 110 and 115mm 2. Steel body with thrust bolt

Professional Puller Set 0XAT4201 1. For Half-Shafts, Drive Shafts, Brake Discs and Brake Drums, etc. 2. Includes: 4.3kg Sliding Hammer; Ø160mm puler plate(3-4-5 hole); Bolt M12/M14x1.5; M14 Shoulder Nut; Adaptor Spindle M20 x2x230mmL 3. Applications: VW/Audi, Alfa Romeo, BMW, Citroen; Fiat; Ford; Mazda; Mercedes; Opel; Peugeot; Porsche; Renault; Seat, Skoda, etc.

251


SUSPENSION

Hydraulic Hub Puller Set 0XAT4213 1. Diameter of disc: 148mm 2. 8 slots for 3 or 4 or 5 stud hub 3. Application: Renault/ Peugeot/ Citroen/ VW/ Audi/ Seat/ Skoda/ Opel/ Volvo/ Fiat etc.

Slide Hammer Gear/Bearing Puller Set 0XAT8007 1. Includes three sets of 100mm triple leg pullers with locking feature which clamps jaws firmly inside/outside the gear or bearing 2. Includes 1.5kg slide hammer 3. Internal Pullers:- 15-40mm & 29-100mm 4. External Puller: - Ø20-130mm

Rear Hub Puller –Ford Transit 0XAT4355 1. For removing the rear hubs from front wheel drive when the the wheel bearings have seized or are tight to the stub axles 2. Application : Ford transit 2000 onwards 3. Front wheel drive vehicles only 4. OEM 204-595-09

Front Wheel Bearing Puller Ford Transit 2006 Onwards 0XAT4356 1. Allows separation from suspension upright of the bearing housing driver flange assemble for disc removal. 2. Can be used with slide hammer when combined with adaptor ( available separately ). 3. No press required 4. Allows re-use of drive flange.

Heavy-Duty Coil Spring Compressor 3pc 0XAT4009 1. 3 piece clamps set with security clamps for extra safety 2. Works on a working pressure of 1500kgs 3. Not recommended for double diameter, dual rate or progressively wound suspension springs

252


SUSPENSION Ford Transit Front Wheel Bearing Removal Tools 0XAT4363 1. Comprehensive kit from 0XAT4356 with 0XAT4374 2. 0XAT4356 Front Hub Removal: For extracting suspension uprights from the bearing drive flange assembly, when removing or replacing front discs on Ford Transits 2006 onwards. 3. 0XAT4374 Inner Bearing Removal Kit: Provides a safer, faster of bearing removal without grinding.

Hub Nut Socket Set ½" Drive 3pc - Bi-Hex 0XAT4209 1. Three pieces thin walled, Bi-Hex impact sockets in ½" drive 2. Hardened & tempered drop-forged chrome molybdenum 3. Specially designed for front hub nuts 4. Packed in a blow moulded case 5. Sizes:30mm/32mm/36mm

Impact Spline Socket Bit Set 6pc -1/2" Drive 0XAT8104 1. Suitable for removal and adjustment of hubs, steering and suspension on selected VAG vehicles 2. High-quality Chrome Molybdenum components suitable for use with impact tools 3. Supplied in storage case 4. Contents: Length 40mm: M14, M16, M18 Length 75mm: M14, M16, M18

Hub Nut Socket Set ½" Drive 5pc 0XAT8122 1. A comprehensive set of Hub Nut sockets for use on most modern vehicles 2. Single Hex (6pt) 3. Manufactured from Chrome Molybdenum 4. Complete with handy storage case 5. Sizes: 30/32/34/35/36mm

Wheel Bearing Locknut Socket Set - 7pcs 0XAT9069 7pc 1/2 Inch Dr. Wheel Bearing Locknut Socket Set Set includes: 55mm Hex (for Toyota FJ. Ln & RN) 2-3/8" Hex (For Early Ford Rangers & Bronco) 2-1/2“ Hex (For light duty trucks) 2-1/2" Round Hex (For Ford F/150 and Full-Size Broncos) 2-3/4" Round Hex (Ford F/250 and 350 Trucks) 2-9/16" Round Hex (Dodge Trucks) 2-3/8" Rounded Hex (Recent Ford Rangers & Bronco)

253


SUSPENSION Impact Coil Spring Compressor For Wishbone Suspension 0XAT4036A - Suitable for lower wishbone diameter size less than 30mm. - Can perform on car working - Can be operated with an air wrench - Provided with a 100Nm-torque extension bar - Patented on three-point locking design - Applications: BMW, Chrysler, Chevrolet, Ford, VW, Honda, Hyundai, Kia, Mazda, Renault, Peugeot, Citroen, Mitsubishi, Skoda, Suzuki, Toyota, Volvo.

Coil Spring Compressor 0XAT4020 1. Long-reach arms compress higher proportion of new coil spring 2. Heavy-duty chrome vanadium construction 3. Allows even and safe compression of spring prior to installation of regular coil spring compressor 4. Maximum reach: 300mm

MacPherson Damper Spring Extractor With Adjustable Jaws (with lock) 0XAT4023A 1. Kit for compressing MacPherson shock absorber coil springs 2. Jaws width can be adjustable, fitting diferent sizes of coil springs 3. Equipped with safety locks for safer working process 4. Can be operated with an air wrench 5. Provided with Product Liability Insurance 6. Break point 5,800 kgf (ca.56,800 N) 7. Max. load 2,318 kgf (ca. 22,700 N)

Coil Spring Compressor Kit 0XAT4028 1. This spring compressors are multi-application tools, compress conventional spring in all cars up to light commercials 2. Developed for modern "Macpherson" suspensions, using a range of 3 sets of interchangeable forks 3. Capacity: 1000kg 4. Gold Yokes: Ø80-105mm Black Yokes: Ø105-140mm Silver Yokes: Ø145-190mm 5. Maximum Jaw Opening: 265mm

254


SUSPENSION Spring Compressor - Wishbone Suspension 0XAT4036 1. Use on wishbone suspension using access points in the rear suspension arm 2. Features two pairs of carefully shaped yokes that prevent coil spring from bowing 3. Capacity: 1250kg 4. Size/Suitability: Ø80-135mm 5. Jaw Opening: 115-300mm 6. Drive: 19mm Hex 7. Applications: Fiat, Hyundai, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Rover, Saab, Toyota, VW, Volvo

Coil Spring Compressor Set 6pcs 0XAT4076 1. Drop forged chrome vanadium steel with heat treated. 2. Set includes a coil spring compress and three pairs of special jaws for McPherson spring compressor. 3. 2-For spring diameter 67~100mm 4. 2-For spring diameter 100~140mm 5. 2-For spring diameter 140-200mm

Professional Coil Spring Compressor 0XAT4115 1. Suitable for Macpherson strut coil springs 2. Features a yoke extension bracket allows use on conical springs 3. Supplied with three pairs of different sized interchangeable yokes, for wide range of vehicle applications and plastic yoke protectors 4. Protect the spring coating from damage and can invalidate the vehicle manufacturer's warranty 5. Safety yokes carefully shaped to stop the spring bowing while under compression 6. Capacity: 1000kg 7. Gold Yokes: Ø80-105mm Black Yokes: Ø105-140mm Silver Yokes: Ø145-190mm 8. Maximum Jaw Opening: 265mm 9. Drive: 21mm Hex

MacPherson Strut Spring Hook Compressor Kit 0XAT4117 Efficiently compresses most 1. MacPherson strut springs for shock absorber replacement 2. Designed with wide contact surfaces for variable coil sizes 3. Detent latch provides additional spring lock 4. Twin assembly allows rapid servicing by alternating from one set

255


SUSPENSION Coil Spring Compressor 0XAT4149 1. Features adjustable safety bar for additional security and compressors have lower safety jaws for ultimate peace of mind 2. High security coil spring compressor with 1200kg maximum capacity per pair 3. Maximum Jaw Opening: 290mm

Coil Spring Compressor Set 0XAT4348 1. 270mm & 370mm lead screws coil spring compressors plugs 2. One driving ratchet handle 3. Drop-forged steel jaws & lead screws both heat-treated to ensure better durability 4. Designed for use in limited space under wheel arch 5. Jaws are designed to fit and wrap coil claws for safety 6. Use with 1/2" drive ratchet

GM-W-Body Strut Service Tool Kit 0XAT4080 Easily removes and installs gas-charged and oil-filled strut cartridges through the strut tower while it's still installed on the vehicle. 1. Includes strut retaining tool 2. Includes tools necessary for removing and installing gas charged or oil filled strut cartridges. 3. Application: FWD Buick: 1988 – 96 Regal; Chevrolet: 1990 – 00 Lumina Sedan, 1995 – 99 Monte Carlo; Oldsmobile: 1988 – 97 Cutlass Supreme; Pontiac: 1988 – 96 Grand Prix

Shock Absorber Service Tool - Mercedes W220 0XAT4135 1. For changing top seal in air suspension strut 2. Application : Benz W220

Double-Ring Shaped Counterholder 0XAT8176 Specifications: - For counterholding when oprating the bottom strut unit screws on MERCEDES-BENZ type 169(A-class). - Especially adapted to the limited space. - Chrome-Vanadium, chrome-plated. - 2x21mm 12-point profile. - Dimensions (LxW):90x30mm. - Thickness:8mm.

256


SUSPENSION Strut Tower Clamp 0XAT4027 1. Specialist fast action clamp designed to support the strut and spring assembly after removal from the vehicle 2. Bolt to workbench or place in vice 3. Use with spring compressor and strut nut tools

Strut Nut Socket - VW & Audi 0XAT4046 1. Suitable for the removal and installation of strut nuts on McPherson struts fitted to Audi and VW vehicles 2. 0XAT4046-01: 3 pieces set - 10.5mm, 12.5mm, 14.5mm 0XAT4046-02: 5 pieces set - 10.5mm, 12.5mm, 14mm, 14.5mm(VW/Audi), 14.5mm(Mercedes-W203/W209)

Strut Nut Socket - VW & Audi 0XAT4093 1. Suitable for the removal and installation of top shock retaining nut 2. Location pegs fit into slots cut in the retaining ring and allow hex key access through the centre for release/adjustment of the shock. 3. Use with 22mm spanner

Volvo Strut Nut Socket Set 0XAT4202 1. Used for removing and installing the top shock retaining nut on S40, S60, S70, S80, S90 models. 2. Includes holding socket and double-D axle center socket.

Strut Leg Pry Socket Set 2pc 1/2"Drive 0XAT4208 1. Reduces risk of damage to hub casting associated with using hammers and chisels to free the strut leg. 2. Suitable for removal and installation of legs on most Audi, Ford, Peugeot, Renault, Seat, Skoda, VW. 3. Sizes: 7 x 5mm, 8.2 x 5.5mm

Shock Absorber Tool Kit 39pcs 0XAT4099 1. Universal turnbuckle set for shock absorbers top fixing 2. Includes: Turnbuckles, Sockets,Oblong Bits, Hex Bit, Flat Bits,Spline Bits and Star Bits 3. Applications: Audi, BMW, Chrysler, Citroen, Fiat, Ford, Honda, Mercedes, Nissan, Peugeot, Renault

257


SUSPENSION Shock Absorber Tool Set 18 Pcs 0XAT4064 1 .Contents:1PC-Reversible Ratchet 2. 7Pcs- 6 Point Sockets: 16 17 18 19 21 22 & 24 MM 3. 10Pcs-1/2" SQ. Drive Extensions

Mini Grease Gun 0XAT8044 1. For mini bearings, model planes & cars, toys reel, automotive & marine parts etc..., 2. Good for hard to reach areas. 3. This gun is easy to operate, has a smooth ďŹ&#x201A;ow and easy to carry around the work shop.

Drive shaft socket for VW/Audi 0XAT4196 1. Used for loosening and tightening the drive shaft nut on 6 speed gear box (4WD). 2. 6-speed manual gearbox 0A3, 4WD. 3. 3/4"D x 45mm 4. Application: Audi A4 2001, Audi A6 2005 5. Length 124mm 6. Equivalent to OEM T40097

Steering Wheel Puller Set 7pc 0XAT4078 1. Two-leg puller, with two pairs of legs and two thrust caps. 2. Use on Vauxhall/Opel and Ford vehicles. 3. Contents:- Yoke, Thrust Bolt,87mm Leg x 2pc, 135mm Leg x 2pc,Thrust Cap x 2

Steering Wheel Puller 0XAT4088 1. Five sets of cap screws are included for various threed requirements 2. The forcing screw features a swivel end to protect steering shaft 3. Cap screws included (pairs): 3/8"-16x3-1/2";5/16"-18x3-1/2"; 5/16"-24x3-1/2"; M8-1.25x90mm; and 5/16"-18x4"(SIR)

258


SUSPENSION Steering Wheel Puller Set 0XAT4091 1. Suitable for steering wheels, sprockets, pulleys and shafts, etc. 2. Range: Ø32 ~ Ø90 mm 3. Contents: - 1pc Puller Disc; Ø110mm w/ Spindle - 3 x Bolt M8x1 ,25x100mm - 3 x Bolt M10x 1,25x100mm - 3 x Bolt M8x1 ,25x80mm - 3 x Bolt M10x 1,5x50mm - 2pc Hex Bolt; 1/4"UNF x 75mm - 2 x Hex Bolt; 5/16"UNF x 90mm - 3 x Hex Bolt; 5/16"UNC x 50mm - 3 x Hex Bolt; 5/16"UNC x 110mm - 3 x Hex Bolt; 3/8"UNF x 50mm - 3 x Hex Bolt; 3/8"UNC x 100mm - Washers: 2pc 1/4"x19; 3pc 5/16"x18; 3pc 3/8"x20

Inner Tie Rod Removal Set 4pc 0XAT4056 1. Remove and install inner tie rods without removing steering gear. Adapters fit into the tie rod socket. 1/2" drive ratchet fits drive end. 2. For use on most Chrysler, Ford, and GM vehicies. 3. Set includes: 1-3/16" &1-5/16" tie rods, 3-Adaptors work on 1-3/16", 1-5/16", and 1-7/16" tie rods.

Rack End Remover and Installer 0XAT4154 1. Track rod (steering arm) remover and installer. 2. Fit over the steering shaft onto the steering rack. 3. Used with a 1/2"D wrench or a 27mm spanner 4. 0XAT4154-01- Size range 28mm to 35mm length 400 0XAT4154-02- Size range 35mm to 45mm length 400

Outer Tie Rod Remover 0XAT4105 1. Hardened & tempered forged chrome- vanadium steel. 2. Works on FWD and RWD American, European & Japanese vehicles. 3. Up to 5 tons of force can be applied

Tie Rod End Socket 1/2" Drive 0XAT4223 1. Used to replace worn out tie rod ends. 2. After separating the bal joint from steering knuckle, slip tool over end of worn tie rod and remove. 3. U-Opening: 34.0x19mm 4. Inner Diameter: Ø23.8mm 5. Length: 57mm

259


SUSPENSION Multi-Purpose Inner Tie Rod Tool 0XAT4249 1. Used to replace the inner tie rod ends without remove the rack and pinion. 2. Capacity 33 - 42mm

Exhaust Pipe Expander Set 3pc 0XAT4001 1. Ideal for fitting aftermarket components to standard exhausts the pipe is the same diameter and not tapered 3. Ensures a perfect fit with no leaks and also removes dents and clamp marks 4. 0XAT4001-01 Small: 29-44mm 0XAT4001-02 Medium: 38-64mm 0XAT4001-03 Large: 54-89mm

Exhaust Donut Stretcher 0XAT4012 1. Steel construction with dipped vinyl handle 2. Enables fast removal and installation of rubber anti-vibration mountings found on modern exhaust systems

Exhaust Puller Tool Set 2pc 0XAT8127 1. Invaluable when installing exhaust systems 2. Two T-handled tools allow easy fitting of exhaust mounts 3. One straight and one hooked to suit block and ring mounts respectively

Exhaust Manifold Clamp Spreader 0XAT4074 1. Robust steel tool for safe removal and installation of the spring clamps 2. Used to attach exhaust system to manifold on VAG vehicles 3. Use with 17mm wrench

Exhaust Pipe Cutter 0XAT4039 1. Suitable for cutting thin wall tubing up to 3.0mm thick 2. Designed to cut where space is restricted, 120° handle movement produces a 360°cut 3. Ideal for cutting all exhaust pipes from Ø35-64mm

Exhaust Pipe & Tubing Cutter 0XAT4041 1. Designed for cutting thin walled steel and copper tubing 2. Suitable for cutting exhaust pipe with diameters from Ø20-75mm

260


SUSPENSION Exhaust Pipe Stretcher Kit 0XAT4401 - Expands all types of exhaust pipe, including stainless steel, from 1-5/8" to 4-1/4" in size. - Contents: Extender#1 (2-3/8"~2-3/4")/ Extender#2 (2-3/4"~3-1/8")/ Extender#3 (3-1/8"~3-1/2")/ Extender#4 (3-1/2"~3-7/8")/ Extender#5 (3-7/8"~4-1/4") must be used with#3/ Standard extender (1-5/8"~2-7/16")

Exhaust Pipe Chain Cutter 0XAT4296 1. Exhaust pipe/tailpipe chain cutter tool 2. Ideal for cutting both thick and thin walled exhaust-pipes 3. Chain suitable for diameters from 19mm (3/4") up to 83mm (3-1/4") 4. Gets into tight spots for easy cutting 5. A complete cut only takes 1/4" turn of the tool

Exhaust Hanger Removal Pliers 0XAT4008 1. Enables fast, one-handed, removal of exhaust brackets from rubber hangers 2. Suitable for a wide range of cars and light commercial vehicles

Exhaust / Hose Clamp Pliers 0XAT4212 1. Opens exhaust hose clamps quickly and easily 2. Ideal for Citroen, Peugeot and Renault exhaust clamps 3. Also suitable for prizing open any types of clamp or clip secured with nut and bolt 4. Comfort grip handles with self locking mechanism aid working on spring clamps 5. Length: 300mm

Exhaust Fume Extractor 0XAT4075 1. Idea for small or large garages and workshops. 2. Features soft rubber cylindrical cone to suit most exhausts Adjustable height for use on small cars or commercial vehicles. 3. Air inlet valve creates vortex with in extractor to ensure all fumes are dispersed(requires air supply) 1.2mtr Body length with additional 3mtr ďŹ&#x201A;exible ducting. 4. Mounted vertically on trolley with integral duct compartment for easy manoeuvrability and compact storage. 5. Air pressure:90psi. 6. Air Consumption:16cfs. Minimum Height:185mm. 7. Maximum Height:550mm. Duct Length:3.0 metre 8. Overall Length:4.2metre.

261


SUSPENSION Magnetic Camber/Castor Gauge 0XAT6041 1. Robust, magnetic gauge mounts onto hub for quick and accurate measurement of camber and castor angles 2. Large adjuster knob for convenient zeroing of bubble during castor angle measurement 3. Graduated from +6° to -6° 4. Supplied in carry-case

Caster Camber Gauge with Magnetic Adaptor 0XAT6043 1. Reads Camber from +6 to -6 degrees, accurate to 1/4 degress. 2. Caster reads from +12o to -4o in 1/2o increments.

Jaguar ABS Rotor Nut Socket for XJ/XK 0XAT4501 - This tool is assist the mechanic in removing the rotor nut-2002-03 XJ Range and 2002-06 XK Range. - Ref OEM: 206-066A

7 Point Socket 0XAT6039 1. Material: CR-MO 2. 3/8"Dr. H19*H21 Imapct socket 7 points 70L

Axle Stud Cone Pliers 0XAT4106 1. Suitable for medium and heavy-duty truck axles. 2. Grips tapered cones on studs for fast and easy access to bearing assembly.

Locking Wheel Nut Remover ½" Drive 2pc 0XAT8121 1. This 2 piece Emergency Wheel Nut Remover removes locking wheel nuts when no key is available 2. Each wheel nut remover has a deep internal reverse thread 3. The two socket sizes fit locking wheel nuts on most vehicles 4. Supplied in storage case 5. Size: 21MM(13/16"), 25MM(1")

262


SUSPENSION Flexible Alloy Wheel Nut Socket Set 3pc 1/2" Drive 0XAT6001 1. Three flexible socket are sleeved and has an insert to prevent damage to alloy wheels and nuts 2. Suitable for use with impact tools 3. Colour coded sockets assist ease of size selection 4. Sizes: 17mm, 19 mm & 21mm

Impact Wheel Socket Set 7pc 1/2" Drive 0XAT6002 1. Six sockets are sleeved and has an insert to prevent damage on alloy wheels and nuts 2. Suitable for use with impact tools 3. Colour coded sockets assist ease of size selection 4. Size: 15, 17, 19, 21, 22, 24, 27mm - This tool is assist the mechanic in removing the rotor nut-2002-03 XJ Range and 2002-06 XK Range. - Ref OEM: 206-066A

Impact Wheel Deep Socket Set 3pc 1/2" Drive 0XAT6007 1. Designed for cutting thin walled steel and copper tubing 2. Suitable for cutting exhaust pipe with diameters from Ø20-75mm 3. Contents:17MM, 19MM, 21MM

Torque Stick Set ½"Drive 5pc Drive 0XAT6008 1. Alloy steel torque sticks designed for use with air and electric impact wrenches 2. Prevents over-torquing of wheel nuts which causes distortion of wheels, drums and discs 3. Help prevent brake pulsation 4. Torque Rating: Black........75 lb.ft /100Nm, Yellow.......80 lb.ft /110Nm Red..........90 lb.ft /120Nm, Blue........100 lb.ft/135Nm Orange...110 lb.ft/150Nm

Torque Stick/Wheel Nut Socket Set 8pc 1/2" Drive 0XAT6009 1. Both are designed for use with air and electric impactwrenches 2. The torque sticks prevent over-torquing of wheel nuts causes distortion of wheels, drums and discs can produce brake pulsation 3. Torque Sticks: Yellow ---- 80lb.ft (110Nm) Red --------90lb.ft (120Nm) Blue ------100lb.ft (135Nm) Orange -- 110lb.ft (150Nm) 4. Impact Sockets:17mm/19mm/21mm/22mm

263


SUSPENSION Wheel Stud Thread Restorer Kit 0XAT6010 1. For repairing damaged wheel stud threads using a reverse action to ensure the alignment of the thread 2. Adaptor sizes: M12 x 1.25mm / M12 x 1.5mm /M14 x 1.5mm

Torque Control Impact Socket Set ½" Drive 3pc 0XAT6013 1. Chrome-Molybdenum Steel, Impact sockets, ideal for removing/fitting road wheels 2. Torque limiting clutch prevents overtightening and resulting wheel/wheel fixing damage while full tool torque is transmitted in reverse for rapid fixing removal 3. Torque Limit: 60 lb.ft/80Nm 4. Sizes: 17/19/21mm

Torque Control Impact Socket Set ½" Drive 4pc 0XAT6014 1. Chrome-Molybdenum Steel, Impact sockets, ideal for removing/fitting road wheels 2. Torque limiting clutch prevents over-tightening and resulting wheel/wheel fixing damage while full tool torque is transmitted in reverse for rapid fixing removal 3. Torque Limit: 60 lb.ft/80Nm 4. Sizes: 17/19/21/22mm

Impact Wheel Socket Set 3pc 1/2" Drive 0XAT6016 1. 3-Sockets are sleeved and has an insert to prevent damage on alloy wheels and nuts 2. Suitable for use with impact tools 3. Colour coded sockets assist ease of size selection 4. Size: 17, 19 & 21mm

Torque Control Deep Socket Set ½"3pc Drive 0XAT6017 1. Chrome Molybdenum steel, Wall-Drive, impact sockets, ideal for removing/fitting road wheels 2. Torque limiting clutch prevents over-tightening and resulting wheel / wheel fixing damage while full tool torque is transmitted in reverse for rapid fixing removal 3. Torque Limit: 60 lb.ft / 80Nm 4. Sizes: 17, 19 and 21mm 5. Length : 150mm

264


SUSPENSION Torque Control Wheel Nut Socket Set 4pc 1/2" Drive 0XAT6018 1. Chrome Molybdenum sockets, hardened, tempered and anodised for corrosion resistance 2. Each 6-point socket is sleeved to prevent damage on alloy wheels and nuts 3. Colour coded for easy selection 4. Includes a torque controlled socket to prevent over-tightening and possible damage on the wheel 5. Suitable for use with impact tools 6. Torque Limit: 60 lb.ft/80Nm 7. Sizes: 17/19/21mm

Torque Multiplier 5pc 1" Drive 0XAT6021 1. This Torque Multiplier is designed for removing the highly torqued wheel nuts on light commercials and trucks up to a maximum torque of 3200Nm 2. The gear ratio is 1:56 and the tool is driven with 1" drive 3. Two high quality 70mm long 4. Chrome Molybdenum sockets are included with the set in sizes: 30mm and 32mm

Ratchet Type Wheel Brace Kit 0XAT6023 1. Features extendable wheel brace with ratchet function 2. Supplied with 2 pieces of double end sockets 3. Socket size:17mm x 19mm; 21mm x 23mm

Lug Wrench 4-Way 17, 19, 21, 22mm 0XAT6025 1. Forged construction with hot forged sockets and baked ďŹ nish 2. Size:17mm / 19mm / 21mm / 22mm

Telescopic Master Wheel Wrench 0XAT6031 1. Extending handle with comfortable grip for extra leverage to remove wheel nut. 2. Supplied with 2 double end sockets 17 x 19mm; 21 x 23mm to cover almost all normal vehicles

265


SUSPENSION 4-Way Folding Lug Wrench 0XAT6035 1. Hardened & tempered chrome-vanadium steel 2. Space saving wheel brace 3. Folds neatly for storage in boot space 4. Sizes: 17mm/19mm/21mm 5. Drive: ½" Square

Wheel Nut Cap Remover 0XAT6036 1. Removes the plastic wheel nut caps fitted to Audi, Seat, Skoda, VW and Vauxhall/Opel vehicles 2. Eliminates the need to lever off caps with a screwdriver, which may damage the alloy wheel 3. Up to six caps may be stored in the handle, ready for refitting 4. Maximum Jaw Opening: 24mm

16pcs Locking Nut Master Key Set 0XAT6048 Contents: 8-point star lug, 7/16” outer diameter 5-spline small diameter socket, 5/8” inner diameter 6-spinline small diameter socket, 41/64” inner diameter High tech fluted hex lug, 12mm outer diameter High tech hex lug, 12mm outer diameter 7-spline small diameter socket, 5/8” inner diameter 7-spline small diameter socket, 11/16” inner diameter 7-spline small diameter duplex socket, inner diameter 6-spline small diameter socket, 41/64” inner diameter 8-point star lug, 5/8” outer diameter 9-point socket style tuner lug nuts 10-point star lug, outer diameter 12-spline small diameter socket, 11/16” inner diameter 12-spline small diameter socket, 13/16” inner diameter 9-point star lug, outer diameter High tech hex lug, 9/16” outer diameter

1/2”Dr. Benz Socket 17mm(78MML) 0XAT6040 1. Specially designed to loosen and tighten the new special wheel bolts found on M-Benz vehicles. 2. Size : ½”Dr. x 17mm (78mmL) - CR-MO Steel 3. Applications for M-Benz : C Class , GLK Class (W204) E Class (W211, W212, W207) SLK Class (W172) M Class & ML Class (W164 & W166) CL Class (CL-500) W216) S Class (W221 & W222)

266


SUSPENSION BMW wheel lock screw removal kit -10pcs (Ref. 361300) 0XAT6049A - Size: #30- H17 x 13PT #35- H17 x 19PT #31- H17 x 15PT #36- H17 x 20PT #32- H17 x 16PT #37- H17 x 21PT #33- H17 x 17PT #38- H17 x 22PT #34- H17 x 18PT #40- H17 x 23PT - Material JIS SCM440, Forged Quality

VAG wheel lock screw removal kit -10pcs (Ref. T4004) 0XAT6049B - Size: ABC0- H17 x 10PT ABC5- H17 x 16PT ABC1- H17 x 11PT ABC6- H17 x 17PT ABC2- H17 x 13PT ABC7- H17 x 19PT ABC3- H17 x 14PT ABC8- H17 x 20PT ABC4- H17 x 15PT ABC9- H17 x 21PT - Material JIS SCM440, Forged Quality

BMW wheel lock screw removal key -10pcs- Spline type (Ref. 361300) 0XAT6050A - Size: #11- H17 x 15PT #16- H17 x 10PT #12- H17 x 14PT #17- H17 x 7PT #13- H17 x 16PT #18- H17 x 13PT #14- H17 x 12PT #19- H17 x 8PT #15- H17 x 11PT #20- H17 x 9PT - Material JIS SCM440, Forged Quality

VAG wheel lock screw removal key -12pcs- Spline type (Ref. T10101A) 0XAT6050B - Size: #51- H17 x 6PT #57- H17 x 12PT #52- H17 x 7PT #58- H17 x 13PT #53- H17 x 8PT #59- H17 x 14PT #54- H17 x 9PT #60- H17 x 15PT #55- H17 x 10PT #61- H17 x 16PT #56- H17 x 11PT #62- H17 x 17PT - Material JIS SCM440, Forged Quality

20pcs VW Wheel Lock Nut Key â&#x20AC;&#x201C; Pattern Style 0XAT6056 - 20pcs wheel lock adapter: #521,#522,#523,#524,#525,#526,#527,#528, #529,#530, #531,#532,#533,#534,#535,#536,#537,#538,#539,#540 - Ref No. T10313 - Length: 42mm, HEX:17mm / SCM440 with Harden and Chrome Plated

267


SUSPENSION BMW Wheel Locking Screw Removal Key -21pc - Spline Teeth Kit 0XAT6051A - Fine Teeth:#30/13PT, #31/15PT, #32/16PT, #33/17PT, #34/18PT, #35/19PT, #36/20PT, #37/21PT, #38/22PT, #40/23PT - Spline Teeth:#11/15PT, #12/14PT, #13/16PT, #14/12PT, #15/11PT , #16/10PT, #17/7PT, #18/13PT, #19/8PT, #20/9PT

VAG Wheel Locking Screw Removal Key -23pc- Spline Teeth Kit 0XAT6051B -Fine Teeth:#51/6PT, #52/7PT, #53/8PT, #54/9PT, #55/10PT, #56/11PT, #57/12PT, #58/13PT, #59/14PT, #60/15PT, #61/16PT, #62/17PT - Spline Teeth: ABC0/10PT, ABC1/11PT, ABC2/13PT, ABC3/14PT, ABC4/15PT, ABC5/16PT, ABC6/17PT, ABC7/19PT, ABC8/20PT, ABC9/21PT

20pcs BMW Wheel Lock Nut Key – Pattern Style 0XAT6057 - 20pcs wheel lock adapter: #41,#42,#43,#44,#45,#46,#47,#48,#49,#50, #51,#52,#53,#54, #55,#56,#57,#58,#59,#60 - Ref No. 362010 - Length: 42mm, HEX:17mm/ SCM440 with Harden and Chrome Plated

20pcs BMW Wheel Lock Nut Key – Pattern Style 0XAT6058 - Operate with 17mm socket.: #A #B #C #D #E #F #G #H #J #L #M #N #O #P #R #S #T #V #W #X - Ref No. T40073

13PC Master Wheel Stud On -Car Installer Kit 0XAT6063

0XAT6063A

0XAT6063B

- 1pc Variable Pin Spanner to help fix the hub - 7pc Wheel Stud On-Car Installer (0XAT6063A) Self-centering to insure that the stud is installed at the correct angle. Kits include a bearing seat and nut. Will not damage wheel stud threads Automotive kit. - Sizes: 7/16"×20 UNF, 1/2"-20 UNF , M12×1.25, M12×1.50, M12×1.75, M14×1.5 - 4pc Internal Threads Chaser (0XAT6063B) (For Mercedes-Benz and other comparable internal threads) - Sizes: M12×1.25mm, M12x1.5mm, M12x1.75mm, M14x1.5mm - 0XAT6063A & 0XAT6063B have individual pack for optional choice.

268


SUSPENSION Wheel Maintenance Kit 14pc 0XAT2061 1. Suitable for use with power drill or air impact wrench 2. Ideal for preparing wheels, hubs and brake discs or drums for re-assembly 3. Removes surface dirt and corrosion 4. Contents: Ø40mm Fine x 5 / Cleaning Head Attachment Pads x 2 5. Head Holder: 8mm Hex Drive, 1/2"Drive Adaptor 6. Cleaning Heads: Ø40mm Course x 5

TPMS 4 Way Valve Tool 0XAT6037 1. Designed for removing and replacing 11mm/12mm TPMS sensor nuts 2. Also for seating bevel and non-bevelled sensor grommets

Tyre Valve Tool 0XAT6203 1. For the replacement and fitting of Schrader type tyre valves 2. Composite body helps to prevent damage to alloy wheels 3. The handle has a notched profile to fit various rim styles 4. 180 degree pivoting head

Wheel Balancing Weight Pliers 0XAT6205 1. Primarily designed for installation and removal of wheel balance weights 2. Includes tools for prising off wheel trims and preparing wheel balance weights

Wheel Balance Weight Pliers 0XAT6206 1. Use to install, remove, trim and tighten clip on wheel weights 2. Includes plastic hammer head for protection of specially coated wheel weights

ISUZU 3.5 Tone Rear Wheel Nut Axle Socket 0XAT4197 Product Specification / Features: Remove the rear wheel axle nut of ISUZU It can be used with torque wrench for installing and removing Material : S45C

Bearing Race & Seal Driver Set 10pc 0XAT4293 Contents : 10,12,14,15,16,18,20,22,25,26,28,30 mm 3 pc- Driver Handle:115,150 & 160 mm ( L )

269


INTERIOR │BODYWORKS│ACCESSORIES Quick Release Windshield Removal Tool 0XAT5013 1. Features push-button for fast blade changes and cutting depth adjustment 2. Knurled handle with heavy-duty, protected cable 3. Supplied with three shaped scraper blades

Windshield Removal Tool - Standard 0XAT5014 1. Aluminum handle with alloy steel blades 2. Supplied with blade and accepts both regular urethane blades and flat scraper blades

Windshield Removal Tool - Stubby 0XAT5015 1. Use on vehicles where the top line of the bonnet hinders access for regular size urethane knives 2. Aluminum handle with alloy steel blades 3. Supplied with blade and accepts both regular urethane blades and flat scraper blades

T-Handle Wire Starter Tool 0XAT5020 1. Stainless steel shaft with contoured T-handle for added grip and comfort 2. Designed for feeding/starting wire through bonding on windscreen 3. Length: 330mm

Straight Handle Wire Start Tool 0XAT5021 1. Suitable for inserting cutting wire through urethane bond 2. Use on vehicles with deep dash where the urethane is positioned below the line of the dash or where space is otherwise at a premium 3. Large comfortable handle enables firm control of the tip of the tool

Windshield Cut-Out Wire Guide 0XAT5082 1. Hardened and tempered carbon steel shaft 2. Unique head design allows access to bonding when used in conjunction with windshield cutting wire 3. Features textured comfort grip handle

270


INTERIOR │BODYWORKS│ACCESSORIES Side Window Holder - Pair 0XAT5018 1. Two pairs of suction cups linked with sheathed, flexible steel cables 2. Designed to retain side windows in closed position while working around winding mechanism

Urethane Knives - 9", 18", 24" 0XAT5022 1. Suitable for vehicles with deep dash-board or where bonding is out of reach to normal tools 2. Extra long, aluminum construction with vinyl handle 3. Supplied with blade 4. Uses standard knife blades 5. 0XAT5022-01 Overall length: 9" (230mm) 0XAT5022-02 Overall length: 18" (450mm) 0XAT5022-03 Overall length: 24" (600mm)

Windshield Removal Blades 0XAT5067 1. Suitable for use in Ellient's AT5013, AT5014 & AT5015 urethane cutting tools 2. Hardened then honed blade allows fast separation of screen from bond and can be re-sharpened 3. 0XAT5067-01 Length: 18mm 0XAT5067-02 Length: 25mm 0XAT5067-03 Length: 38mm

Windshield Removal Tool Kit 3pc 0XAT5068 1. Aluminum construction with vinyl handle 2. Hardened then honed blade allows fast separation of screen from bond and can be re-sharpened

Windshield Removal Flat Blades 0XAT5069 1. Suitable for use in Ellient's AT5013, AT5014 & AT5015 urethane cutting tools 2. Hardened then honed blade allows fast separation of screen from bond and can be re-sharpened 3. 0XAT5069-01 Width: 13mm 0XAT5069-02 Width: 16mm 0XAT5069-03 Width: 19mm

271


INTERIOR │BODYWORKS│ACCESSORIES Windshield Stand Folding 0XAT5146 1. Lightweight tubular steel design with variable height facility 2. Large rubber suckers prevent screen from moving during preparation 3. Folding frame makes this ideal for both workshop and mobile screen preparation 4. W 1029mm x H 850mm/ Capacity: 500 pounds

Glass Run Channel Cleaner 0XAT5016 1. Designed for the fast removal of glass chips andlumps from the run channels on side windows. 2. Also suitable for unhooking the locking weather strip around screens. 3. Extra long shaft for reaching into the deepest door recess. 4. 0XAT5016-01 Overall length: 12.5" (320mm) 0XAT5016-02 Overall length: 24" (610mm)

Window Winder Clip Pliers 0XAT5087 1. For removing windshield moulding clips and door handle clips 2. Releases clips to remove chrome moulding on windshield and rear glass 3. Offset handle permits easy access to moulding clips 4. Clips under door handle without damage to panel material

Dent Puller/Suction Cup 0XAT5053 1. Rubber Suction Cup (75mm) for small dent removal 2. Use for carrying and positioning tiles, marble and glass 3. Holds up to 10kg horizontally

Suction Pad Clamps Set 6pcs 0XAT5055 1. Essential for holding bodywork trims during gluing operations 2. Diameter:78mm

Suction Gripper Single Head 0XAT5057 1. Ø120mm Rubber suction grip prevents damage to surface 2. Designed for handling glass, tiles, plastic, sheet metal and other non-porous material 3. Holds up to 10kg in horizontal position

272


INTERIOR │BODYWORKS│ACCESSORIES Suction Gripper Double Head 0XAT5058 1. Two Ø120mm rubber suction grips prevent damage to surface 2. Designed for handling material such as glass, tiles, plastic, sheet metal and other non-porous material 3. Holds up to 40kg in horizontal position

Aluminum Suction Gripper - Double Head 0XAT5063 1. All aluminum body with centre handle for easy lifing. 2. Diameter: 117mm (4.6") 3. Loading capacity 50kgs 4. The unit weigth: 780g

Dent Puller / Suction Cup Aluminium 0XAT5072 1. Lifting capacity 30kg 2. Ideal as a small dent puller 3. Can also be used to carry glass or heavy sheet metal 4. Manfactured from Aluminium alloy 5. Diameter:4.84" (123mm)

Dent Puller/Suction Cup/Twin - Aluminium 0XAT5078 1. Ideal as a dent puller or suitable for carrying large awkward items such as glass, doors, windows, sheet metal, etc. 2. Lifting capacity 80kg 3. Use to carry glass or heavy sheet metal 4. Manufactured from aluminium alloy

Windshield Handling Kit 3pcs 0XAT5093 1 .Two glass-reinforced plastic gripper handles with four 115mm lever operated suction pads. 2. Powerful suction will handle 60kg of windscreen. 3. Supplied with ratchet tie down to fix screen in position if required.

Seal Puller 0XAT5004 1. Use to remove oil and grease seals on automobiles and light trucks. 2. Puller has 2 tip size for most applications.

273


INTERIOR │BODYWORKS│ACCESSORIES Door Upholstery Removal Tools 0XAT5005 1. For plastic upholstery fasteners. 2. Place tool under edge of door panel and insert into fastener as simply pry up 3. Blade-carbon steel/ Handle-PP

Door Panel Remover 0XAT5011 1. Chrome-vanadium steel with blackened finish shaft. 2. Chmfortable grip handle.

Trim Remover Tool 0XAT5012 1. For plastic upholstery fasteners. 2. Hardened & tempered chrome-vanadium steel blade with chrome-plated.

Rear View Mirror Release Tool 0XAT5027 1. Enables fast removal of mirrors 2. Slide prongs between mirror and bracket to release 3. Applications: Ford, Vauxhal/Opel

Airbag Removal Tool Set 7pc 0XAT5126 1. Designed for the safe removal of steering wheel airbags 2. Suitable for use on Audi, BMW, Mercedes, Seat, Skoda and VW vehicles 3. Applications: Audi, BMW, Mercedes, Seat, Skoda, VW

Trim & Upholstery Tool Set 4Pcs 0XAT5001 1. This set includes a selection of the most popular door, handle and trim tools covering a wide range of service applications, which allow you to get the job once easier and faster. 2. Set includes three Door Panel Remover and a Door Handle /Window Lift Tool.

274


INTERIOR â&#x201D;&#x201A;BODYWORKSâ&#x201D;&#x201A;ACCESSORIES Universal Air Bag Removal 0XAT5127 1. A seven piece tool kit for removing air bags on VW, Audi, Seat, Skoda, BMW, and Mercedes. 2. Contents: Torx30 - Audi, Opel, Renault, VW. 3. Torx 30 (Security) - Audi, BMW, Opel Mercedes. 4. Torx 25 - BMW; Torx25 (Security) - BMW. 5. Hex 5mm - Audi.

Air Bag Release Tool Kit 0XAT5183 1. Use to remove the air bag module from steering wheel. 2. Work on many GM, Ford, Mercedes Benz vehicles. 3. Applications: Ford 2000-2004 Taurus/Sable, 1999-2003Windstar VanGM, 2005 Chevrolet Impala, Lumina, Montana, Buick LeSabre Century, Regal, Olds Intrigue, Cadillac El Dorado, Deville, STS, SLS Mercedes Benz Models 107, 123, 124, 126, 129,140, 163, 164, 170, 201, 202, 203, 208, 209, 210, 211, 215, 219 , 220,221, and 463.

10-in-1 Trim Removal Tool 0XAT5023 1. 10 tools in one 2. Moulding trim and badge remover 3. Windscreen wiper wrench/moulding clip remover 4. Door rubber/metal clip inserter, door handle clip remover 5. Door weather strip and bezel clip remover, headlamp spring clip tool

Door Handle Remover 0XAT5024 Simple tool for griping and rotating door handles avoid damage to the fascia panel

Moulding Release Tool 0XAT5025 1. Hardened & tempered steel blade. 2. Comfortable handle.

Trim Removal Wedge Set 5pc 0XAT5029 This Trim removal tool has applications for internal and external trim, which is manufactured from composite material to reduce the risk of marking the bodywork

275


INTERIOR │BODYWORKS│ACCESSORIES Trim Removal Wedge Set 3pc 0XAT5030 1. Utility wedge set suitable for removal of wide range of exterior body and interior trims 2. Composite material reduces chances of marking or scratching paintwork body/ trim 3. Includes fork-ended trim stud removal tool 4. Wedge Width: 22mm, 30mm, 60mm

Trim & Upholstery Tool Set 5pc 0XAT5036 1. Designed to simplify trim and trim stud removal, manufactured from resilient plastic to minimise panel damage and marking 2. Includes: - Standard clip remover - Trim wedge,narrow model - Dual clip remover - Clip remover - Bumper trim wedge,wide model

Scraper Set 4pc Composite 0XAT5039 1. Ideal for removing trim, badges and decals from bodywork 2. Suitable for removing residue from alloy wheels 3. Polypropylene edges will not scratch or mark paint or panel work and can be re-sharpened with a file when required 4. Blade Sizes: 19, 22, 26, 38mm

Trim Clip Removal Pliers 0XAT5056 1. Spring-loaded pliers for trim clip removal without trim damage 2. Easy access into confined areas, such as bumper covers 3. Length: 240mm

Mini Panel Removal Set 6pc 0XAT5086 1. With slim profile to simplify removal of small trim items and panels 2. Ideal for removal of dash trim and internal fittings 3. Manufactured from resilient nylon to minimize panel damage and marking

Moulding Release Tool 0XAT5019 1. Used for releasing body moulding clips 2. Double sided design suitable for a variety of clip configurations 3. Hardened and tempered steel head with comfort grip handle

276


INTERIOR │BODYWORKS│ACCESSORIES Dead-Blow Hammer Trim Panel Tool Set 12pc 0XAT5178 1. The 12 piece set can easily and safely remove interior and exterior trim pieces. 2. Helps remove air conditioning vents, door trim clips, dashboard pieces, plastic track guards around carpet openings or any delicate pieces that need to be removed. 3. Instead of breaking these delicate parts, they now can be saved and reused instead of ordering new parts. 4. The eleven hard plastic pieces are double-sided to provide a wider range of options to get the job done. A mini dead-blow hammer is a great tool for delicate jobs. A heavy duty body panel clip remover with grip handle provides more leverage on tough-to-remove clips and completes the set.

Universal Moulding Release Tool 0XAT5026 1. Used for opening clips to release body mouldings 2. Suitable for a variety of clip configurations 3. Manufactured entirely from steel and zinc plated for corrosion resistance

Hog Ring Pliers, Straight & Angled 0XAT5048 1. Suitable for installation of upholstery hog rings, commonly found on vehicles upholstery 2. Cupped and spring loaded jaws hold hog rings in place during installation 3. Features PVC dipped handles for added comfort 4. 0XAT5048A - Straight Hog Ring Pliers 0XAT5048B - Angled Hog Ring Pliers

Rivet Removal Pliers Set 2pc 0XAT5122 For the removal of plastic two piece rivets so that can be re-used e.g.

Window Winder Clip Pliers 0XAT5087 1. For removing windshield moulding clips and door handle clips 2. Releases clips to remove chrome moulding on windshield and rear glass 3. Offset handle permits easy access to moulding clips 4. Clips under door handle without damage to panel material

277


INTERIOR │BODYWORKS│ACCESSORIES

01

0XAT5214

02

03

04

05

06

07

08

09

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

Trim Panel Removal & Scraper Tool Set 27pcs

1. Comprehensive 27pcs set for safe removal of door panels, fascia and trim strips, window moldings, dashboard and interior panels & trim, etc. 2. Following materials are available: Polypropylene -Soft; Nylon + Fibre Glass -Stronger; POM -Strong - 0XAT5214-01 General Purpose Pry Tool For splitting soft plastic parts, also to smooth caulking - 0XAT5214-02 General Purpose Wide Edge Tool For splitting soft plastic parts that are thin and fragile - 0XAT5214-03 Small Grommet Pry Tool For small grommets and clips that require some leverage - 0XAT5214-04 Emblem Remover A 90° wedge specially designed for emblem removal - 0XAT5214-05 Large Grommet Pry Tool For larger grommets and clips that require some leverage - 0XAT5214-06 General Purpose Wedge Tool For wedge panels open to allow clip viewing and removal - 0XAT5214-07 Flat Grommet Remover Narrow flat forked pry for splitting panels - 0XAT5214-08 General Scraper Tool Perfect for removing gaskets on aluminum or steel - 0XAT5214-09 Flat Scraper Tool For delicate scraping jobs that require less of a wedge angle - 0XAT5214-10 Angle Scraper Tool Angled for sharp edges and corners - 0XAT5214-11 Wide Scraper Tool For delicate scraping jobs with larger areas to cover - 0XAT5214-12 Panel Clip Removal Tool Use for tight fits around medium sized panel clips - 0XAT5214-13 Tube Scraper Tool A special designed scraper for tubes and pipes - 0XAT5214-14 Box Corner Scraper Tool For scraping into corners or wi thout changing the hole angle of the tool

- 0XAT5214-15 Curved Scraper Tool Works best for removal of material from inside radiuses surfaces - 0XAT5214-16 Corner Scraper Tool Perfect for scraping into corners and edges - 0XAT5214-17 Concentrated Scraper Tool For concentrating scraping power into small regions - 0XAT5214-18 Corner Scraper Tool For scraping around sharp outside edged corners - 0XAT5214-19 General Purpose Pry Tool For any prying or splitting that requires some leverage - 0XAT5214-20 Thin & Flat Tool For wedging and splitting deep into narrow locations - 0XAT5214-21 Thin With Pry Tip Tool For prying in narrow and deep locations - 0XAT5214-22 Flat Grommet Pry Tool For prying grommets under long flat panels - 0XAT5214-23 Aangled Push/Pull Scraper Allows scraping at an angle in both the pushing and pulling directions - 0XAT5214-24 Flat Push/Pull Scraper Allows scraping in both the pushing and pulling directions - 0XAT5214-25 Wire Insertion Tool Tool is inserted into wire tie wraps to guide additional wires into bundle - 0XAT5214-26 Interior Button Removal Tool For removing delicate interior screw button gaps Also designed for removing interior fittings that contain a driver slot - 0XAT5214-27 Flat Sealant Application Spade Designed for applying sealants and caulking evenly

278


INTERIOR │BODYWORKS│ACCESSORIES Heavy-Duty Wiper Arm Puller 0XAT5034 1. Heavy-duty construction with locking feature allowing the tool to be fastened securely to the wiper arm before commencing pull 2. Combination of swivel mounted thrust bearing and tommy bar on thrust bolt allow even the most stubborn wiper arms to be lifted off their drives 3. Suitable for battery terminal and alternator bearing removal

Wiper Arm Removal Tool 0XAT5040 1. Suitable for spline taper and tapered spigots 2. For the removal of stubborn wiper arm 3. Screw thread and hook feet 4. Sized for difficult access

Windshield wiper arm puller - BMW 0XAT5097 1. Windshield wiper arm puller with adjustable puller with spring used versatile 2. Applications: BMW Series: E12, E21, E23, E24, E28, E30, E30C, E31, E32, E32 / 3, E34,E36,E36 / 2, E36 / 3, E36 / 5, E36 / 7, E36 / C , E38, E38 / 3, E39,E39PL, E46, E46/16, E46 / 2, E46 / 3 E46 / 5, E46 / C, E52, E53, E60, E65, E66,E67, E85, RR1

Universal Wiper Arm Puller 0XAT5098 1. Adjustable, compact and light easy to use, prevents damaging wiper arm 2. Cross-piece special for wiper featuring a nozzle

Wiper Arm Puller 0XAT5099 With adjustable arms makes a tricky task easier without risk of damage to the wiper arm

Wiper Arm Puller Set 8pc 0XAT5123 1. Suitable for a wide range of vehicles 2. Includes a sliding hammer 3. Applications: Audi, Volkswagen, Ford, Mercedes-Benz, Peugeot and Vauxhall/Opel

279


INTERIOR â&#x201D;&#x201A;BODYWORKSâ&#x201D;&#x201A;ACCESSORIES Wiper Arm Puller Set 13pc 0XAT5124 1. With sliding hammer and ejection arbor 2. Universal application 3. Including 2-arm gear puller 4. Applications: Audi, Alfa-Romeo, BMW, Citroen, Chrysler-Jeep, Daihatsu, Chevrolet-Daewoo, Fiat, Ford, Honda, Hyundai, Jaguar, KIA, Land Rover, Mazda, MG-Rover,MB, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Suzuki, Toyota, Volvo and VW

Wiper Arm Puller Set 0XAT5125 1. This Wiper Arm Puller set is supplied with two sets of legs giving greater versatility across numerous makes and models 2. Also suitable for some Commercial Vehicles including Man and Scania 3. Maximum reach 50mm, width 60mm

Wiper Arm Removal & Washer Jet Cleaning Tool Set 0XAT5225 1. Two essential tools for windscreen maintenance. 2. Universal wiper arm puller. 3. Washer jet tool kit for unblocking washer jets. 4. Also use to redirect washer jets. 5. Adjustable arms 6. 2 Arm adjustable Design is adjustable,compact and light easy to use for prevents damaging wiper arm.

Universal Windshield Wiper Arm Puller Set 13pc 0XAT5201 1 .Designed to remover bolted wind-screen wiper-arms, especially for those which have become rusted or corroded onto the drive-shaft. 2. Suitable for:VW-Audi, Ford etc.

Suction Cup Dent Puller Set - Manual 0XAT5202 1. Sliding hammer to ease dent without damaging to the paint surface. 2. Comes with 3 suction pads and one hook. 3. Suction Pads size : 75 mm, 100 mm and 125 mm.

280


INTERIOR │BODYWORKS│ACCESSORIES PDR Dent Bar Set, 8pcs 0XAT5267 1. For removal of dents as a PDR tool set 2. Contents: - Angles ball-heades bar:980mm - Pointed bar:590mm - Angles ball-heades bar:505mm - Half-round pointed bar:980mm - Round bar:460mm - Specail-type hooked bar:665mm - Half-round bar:245mm - Half-round bar:235mm 3. Three plastic heard

Suction Cup Dent Puller Set - Manual 0XAT5202A 1. Sliding hammer to ease dent without damaging to the paint surface. 2. Comes with 3 suction pads and one hook. 3. Suction Pads size : 75 mm, 100 mm and 125 mm.

PDR Dent Bar Set, 33pcs 0XAT5268 - This paintless dent repair kit contains an essential gathering of 33 expertly designed and professionally crafted paintless dent removal tools - Contents: Lever hooks, 45° and 90° flat nose bars, flat bar, 45° flat bar, panel bag, window wedge, plastic punch, interchangeable screw-on plastic rounded tips, door jam, curved rounded nose hook bar - 0XAT5268B is plant handle without grip on dent bars.

Mini Sliding Hammer Dent Puller Set 0XAT5229 - Mini Sliding hammer providing the quick job for PDR (Paintless Dent Repair) of slight dents. - Contents: 0.95lb(0.43kgs) sliding hammer 10 pcs Glue pads included

Manual Dent Puller Set 0XAT5230 1. Idea for repair the vehicle body small damage. 2. Aluminum steel frame with rubber protect leg for high quality & long life. 3. Swivel pads provide stability on non linear surfaces. 4. Bolt drive with spring allows for precise PDR (Paintless Dent Repairing) job of minor dent repairing. 5. 10 pcs glue pads are included.

281


INTERIOR │BODYWORKS│ACCESSORIES Pro PDR Puller Kit 0XAT5279 Great PDR kit for minor dents repairing job , save time and cost . 1. A Glue gun with 4 adhesive glue sticks for best performance. 2. A Manual operation dent puller (0XAT5230) to provide precise pulling job. 3. 10 dent pads in various sizes and shapes. 4. 1 Elegant 0.95lb (0.43kg) sliding hammer puller (0XAT5229) to help pull out hard dents with dent pad. 5. Multi light hammer with plastic and soft metal head, flexible handle and scraper-tang to help light duty job and removal dent pad easily.

PDR Line Board 0XAT5277 - Easy tool to check flatness when doing paintless dent repairing job. Suction seat can easy stick on panel. - All reflective alignment line can help user to see which deformed dent area needs to do more jobs.

Sliding Hammer Locking Plier 0XAT5291 1. Tool set is from PR2006 10” Swivel Hanger Locking Plier with 1.3kg sliding hammer. 2. 10” locking plier provides quick and easy clamping on objects as pin, nail or panel-seam for pulling job. 3. Forged swivel hanger also can afford for chain tool jobs.

Panel Bag/ Air wedge Set 4pc 0XAT5033 1. Air wedge is designed to create working room around the door panel or window frame when using other dent repairing or lockout tools. 2. Multi- purpose durable air cushion devices with rigid edges and fine air control valve 3. Suitable for positioning panels, bonnets and boots, prior to fitment 4. Bag Dimensions: 40 x 182mm, 57 x 188mm, 160 x 160mm

Panel Bag/ Air Wedge 0XAT5035 1. Air wedge is designed to create working room around the door panel or window frame when using other dent repairing or lockout tools. 2. Multi- purpose durable air cushion devices with rigid edges and fine air control valve 3. Suitable for positioning panels, bonnets and boots, prior to fitment 4. Load Capacity: 100kg 5. Capacity: 2~50mm

282


INTERIOR │BODYWORKS│ACCESSORIES Seam Buster Kit 3pc 0XAT5301 1. Separates spot welded or bonded panels easily 2. Sharpened on three edges allowing a side impact blow to separate the panels 3. The 90 degree angled tool allows access in difficult areas 4. Bi-material for comfortable grip 5. Contents: 1 x Straight, 1 x 30° offset & 1 x 90° angle splitters.

Seam Buster Master Set 0XAT5302 Contents: 1 x Razor blade (material SK5 HRC:58+-1 thickness:0.5mm) 1 x 40mm multi-purpose razor scraper 1 x Straight seam splitter 1 x 30 offset seam splitter 1 x 90 angle seam splitter (Spare 10pcs blade boxes are not included)

Door Pin Extractor Tool Set 4pc 0XAT5051 1. Steel pins and anvil 2. Suitable for removing doors fitted with hollow type hinge pins 3. Includes Ø3.2, Ø4.3 and Ø5.5mm pins and hammer anvil 4. Pin Sizes: Ø3.2, 4.3, 5.5mm

Door Hinge-Pin Tool Set Heavy-Duty 0XAT5052 1. Suitable for removing doors fitted with hollow type hinge pins 2. Cranked anvil affords better access and therefore more power for pin removal 3. Includes: Ø3.0, Ø5.0 and Ø5.5mm pins and hammer anvil

Door Hinge Removal & Inst allation Kit 9pc 0XAT5139 1. Designed for the removal and installation of vehicle door hinges 2. Precision angled tool holder allows access to hard to reach hinges 3. Includes mini reversible ratchet for use in confined areas 4. Contents: Bits T30, T40, T45, T50, Spline M8, M10, M12, 305mmL Handle, 135mmL 5. Reversible Ratchet

283


INTERIOR │BODYWORKS│ACCESSORIES Door Hinge & Handle Removal Kit 0XAT5041 1. Start driver tools for the removal of door hinges and handles from Audi, Mercedes Benz, Porsche and VW 2. Consists of two long-reach drivers and an 8mm hex drive reversible ratchet wrench with four star bits

Door Jammer 0XAT5128 1. Holds door ajar while working on or around door-skins or door-struts 2. Prevents inadvertent damage to adjacent panels 3. Ideal for sanding, painting and practically any work around door edge

Corrosion Assessment Hammer 0XAT5083 1. Aluminum shaft with composite head. 2. Suitable for pre-test inspection of bodywork and detection of stuctural corrodion. 3. Length:140mm

Pick & Finishing Hammer 0XAT5103 1. Crowned face + Round pick head. 2. Head material: 1055 Medium carbon steel. 3. Head polished: Red baked paint finished. 4. Normal polished on striking faces + bell + cheeks + pick. 5. Handle: Octagonal shape natural color hickory handle.

Straight Pein & Finishing Hammer 0XAT5104 1. Crowned face + Pick head & Pick. 2. Head mateerial: 1055 Medium carbon steel. 3. Head polished: Red baked paint finished. 4. Normal polished on striking face + bell + cheeks + pick. 5. Handle: Octagonal shape natural color hickory handle.

Curved Pein & Finishing Hammer 0XAT5106 1. Crowned face, head with red painted 2. Head Material: 1055 medium carbon steel 3. Head Polish: normal polished 4. Handle:Octagonal shape natural hickory

284


INTERIOR │BODYWORKS│ACCESSORIES Heavy Shrinking Hammer 0XAT5107 1. Head Material: 1055 medium carbon steel 2. Head Polished: Blue baked paint finishd. 3. Normal polish. 4. Hickory handle. 5. Head type: Flat Face & Shrill 6. Milled Square Face

Standard Bumping Hammer 0XAT5109 1. Crowned face + Square flat face 2. Head material: 1055 medium carbon steel. 3. Head polished: Red Baked paint finished. 4. Normal polished on striking faces + bell + cheeks. 5. Handle: Octagonal shaped netural color hickory handle.

Slide Hammer Kit 0XAT8047 1. Slide hammer kit with 10lb sliding weight. 2. Supplied in tough carry-case with storage for set of attachments. 3. Attachments: Large & Small Flat Hook, Large & Small Round Hook, Screw Holder, Adaptor, Self Tapping Screw, Taper Screw.

Head Changeable Hammer Kit 13pcs 0XAT5260 1. A complete set of changeable hammer kit. 2. Special hammer heads made of different materials to service different surfaces made of different materials. 3. Slim head great to service surface precisely. 4. Light, Compact, Easy to Assemble.

Soft Tip Air Hammer Set 0XAT5261 1. Includes Steel, Brass, Nylon, and Aluminum air-tipped tools. 2. Non sparking (for non-ferro head) and non-marring for sensitive surfaces for aluminum body vehicles 3. Hammer heads are replaceable 4. 0.401" shank tools

7-in-1 Multi Head Mini Hammer Set 0XAT5262 - Very economical bodyworks hammer set with six interchangeable heads for variety material. - Durable nylon hammer body to provide flexibility and precise job with chisel end for more applications. - Contents: Body with chisel tang. Curve Head: Aluminum, Copper, Rubber, Steel. Flat Head: Copper, Plastic.

285


INTERIOR │BODYWORKS│ACCESSORIES Air Tubing Adaptor Clamp 0XAT2306 - Some multi-purpose or preformed hose for air, fuel, oil, lube, and limited hydraulics is very hard to assemble fittings when environment dirty and greasy. - This clamp is working from locking plier mechanism to provide quick and easy job for assembly fittings widely applications among Truck Air Brake Systems, Fuel Lines, Transmission Fluid Lines, Auxiliary Compressor Engines, Construction Equipment Lubrication, Trailer Air Lines, Marine Engines, Bus Engines, Auxiliary Air Lines. - 0XAT2306A : 5 Sizes for 6, 8, 10, 12, 16mm O.D. of hose 0XAT2306B : 5 Sizes for 7, 9, 10, 12, 14mm O.D. of hose 0XAT2306C : 5 Sizes for 8, 9, 10, 11, 12mm O.D. of hose 0XAT2306D : 3 Sizes for 15, 16, 18mm O.D. of hose

Shrinking Dolly 0XAT5111 1. Sand-Blasted + Red Painted Finish 2. Head Material:1055 Medium Carbon Steel 3. Head Polish:Mirror Polished

Toe Dolly 0XAT5112 1. Sand-Blasted Finish 2. Head Material:1055 Medium Carbon Steel 3. Head Polishe:Mirror Polished

Hell Dolly 0XAT5113 1. Head Material: 1055 medium carbon steel. 2. Head polished: Sand-blastede finis, normal polished. 3. L:78mm, W:60mm, D:30mm

Angle Dolly 0XAT5114 1. Sand-Blasted Finish 2. Head Material: 1055 Medium Carbon Steel 3. Head Polishe: Normal Polished

Curved Dolly 0XAT5115 1. 1055 Medium carbon steel. 2. Head Polish: Red baked paint finished; normal polished. 3. L:132mm, W:72mm, D:74mm

Utility Dolly 0XAT5116 1. Head Material: 1055 medium carbon steel. 2. Head polished: Sand-blastede finis, normal polished. 3. L:75mm, W:61mm, D:74mm

286


INTERIOR │BODYWORKS│ACCESSORIES Double End Hand Dolly 0XAT5117 1. Head Material: 1055 medium carbon steel. 2. Head polish: Red baked paint finished; normal polished. 3. Length:66mm. 4. Width:61mm. 5. Depth:74mm.

Grid Toe Dolly 0XAT5118 1. Head Material: 1055 Medium Carbon Steel. 2. Head Polished: Red Baked Paint Finished; Normal Polished. 3. Length: 122mm 4. Width: 59mm 5. Depth: 29mm

Thin Toe Dolly 0XAT5119 1. Head Material: 1055 Medium Carbon Steel. 2. Head Polish: Sand-Blasted Finish; Normal Polished.

Drip Moulding Spoon 0XAT5120 1. Head Material: 1055 Medium Carbon Steel. 2. Head Polished: Blue Baked Paint Finish; Normal Polished. 3. Length:236mm. 4. Width:49mm.

Nylon Chisel & Rubber Dolly Set 0XAT5151 - Double End Dolly, Round Head Chisel Dolly, - Bolster Head Dolly, Crease Alignment Tool, - Profile Arranging Block I + II, Hand Fist Flat + Curved, Large Rubber Dolly, Rubber Dolly, GeneralPurpose Dolly, Block Dolly, Curved Dolly, Wedge Dol

7Pcs Auto Body Repair Tool Set 0XAT5100 1. Polish:Mirror 2. Handle:Genuine Hickory

287


INTERIOR │BODYWORKS│ACCESSORIES Rubber Heel Dolly 0XAT5160 1. Weighted dolly with rubber coating to provide cushioning. 2. Curved edge enables use in recessed corners. 3. Ldeal for use on thinner material. 4. SIZE:2-1/2"×3"×1-1/2".

Small Pull Clamp 0XAT5161 1. Suitable for use with body repair kits and chassis straighteners 2. 5 ton pull capacity

Pulling Clamp with Right Angle Pull 0XAT5170 1. Suitable for use with body repair kits and chassis straighteners 2. Features dual self-tightening serrated jaws for a positive grip 3. 5 ton pull capacity in line and 2 ton in right angle pull 4. Size: 180mm(7") overall length x 120mm(4-3/4") width

Small Pull Clamp with Right Angle Pull 0XAT5162 1. Suitable for use with body repair kits and chassis straighteners 2. 2-directional pull operation 5 ton pull capacity in line 2 ton in right angle pull

Big Pull Clamp 0XAT5163 1. Suitable for use with body repair kits and chassis straighteners 2. 3 ton pull capacity

Big Pull Clamp 0XAT5164 1. Suitable for use with body repair kits and chassis straighteners 2. Both sides jaws are different in order to fit the confined room 3. 3 ton pull capacity in line

Box Pull Clamp with Right Angle Pull 0XAT5165 1. Suitable for use with body repair kits and chassis straighteners 2. 2-directional pull operation 3. Both sides jaws are different in order to fit the confined room 4. 3 ton pull capacity in line and 2 ton in right angle pull

288


INTERIOR │BODYWORKS│ACCESSORIES Heavy Duty Pull Clamp 0XAT5166 1. Suitable for use with body repair kits and chassis straighteners 2. 5 ton pull capacity

Mini Pull Clamp with Right Angle Pull 0XAT5167 1. Suitable for use with body repair kits and chassis straighteners 2. 2-directional pull operation 3. 3 ton pull capacity in line and 2 ton in right angle pull

Long Nose Pull Clamp 0XAT5168 1. Suitable for use with body repair kits and chassis straighteners 2. Get into the difficult to reach areas and tight spots 3. 2 ton pull capacity, 32mm jaw width

Pulling Clamp 0XAT5169 1. Suitable for use with body repair kits and chassis straighteners 2. Features dual self-tightening serrated jaws for a positive grip 3. 5 ton pull capacity 4. Sizes: 180mm(7") overall length x 120mm(4-3/4") width

Multi-Directional Pulling Clamp 0XAT5171 1. Special design will pull in up to three directions at once 2. Features dual self-tightening serrated jaws for a positive grip 3. 5 ton pull capacity in line and 2 ton in other directions pull 4. Size: 180mm(7") overall length x 120mm(4-3/4") width

Utility Claw Hook 0XAT5172 1. For use as chain shorten or chain connector, use with 5/16", 3/8" chains 2. Capacity: 6 ton

Chain Shortener 0XAT5173 1. Enables to use two clamps side by side for more pull, with 5/16" or 3/8" chains 2. Capacity: 6 ton

289


INTERIOR │BODYWORKS│ACCESSORIES Twin Pull Hook 0XAT5174 1. Enables to use two clamps side by side for more pull, with 5/16" or 3/8" chains 2. Capacity: 6 ton

Eye Bolt & Pull Plate 0XAT5175 1. Suitable for use with body repair kits and chassis straighteners 2. Suitable for chain 5/16" & 3/8"

Multi-Directional C-Clamp 0XAT5176 0XAT5176-01 Jaw Opening: 3" (75mm) Pull Capacity: 5 ton 0XAT5176-02 Jaw Opening: 6" (150mm) Pull Capacity: 4 ton

Handy Hook 0XAT5177 - Quick tie-down for track systems or back anchoring on frame racks - Lip can be used for pulling damaged areas for body works of vehicle. - Design for use with 5/16 or 3/8 inches chain - Width: 80mm - Overall length: 130mm

90-Degrees Corner Clamp 0XAT5247 1. Drop forged Cr-Mo alloy steel for maximum strength. 2. User does not need to use two separate clamps and will be able to get into confined areas. 3. To be used with slide hammer.

Universal Flaring Tool Set 0XAT2315 Good for steel, aluminum and copper pipes with Ø 3/16" (4.75 mm) and 1/4" (6.00 mm)

HD Scissor Pulling Clamp 0XAT5248 1. Drop forged Cr-Mo alloy steel for maximum strength. 2. User does not need to use two separate clamps and will be able to get into confined areas. 3. To be used with slide hammer.

290


INTERIOR │BODYWORKS│ACCESSORIES Ford Spring Lock Replacement O-Ring & Garter Spring Assortment 0XAT5806 - Compatible with R12 and R134a systems. - 10 x #6 O-Ring / 10 x #8 O-Ring / 10 x #10 O-Ring 5 x #12 O-Ring / 5 x #6 Garter Spring 5 x #8 Garter Spring / 5 x #10 Garter Spring 5 x #12 Garter Spring

225 pcs O-Ring Assortment – SAE 0XAT5807 1. 18 different imperial sizes of 225 pieces. Use for personal and professional workshops, garages, and plumbing services. 2. Sizes: ID ø 3/32 ~ 3/4 inch

225 pcs O-Ring Assortment – Matric 0XAT5808 1. 18 different metric sizes of 225 pieces. Use for personal and professional workshops, garages, and plumbing services. 2. Sizes: ID ø 3 ~ 22 mm

382 pcs O-Ring Assortment – SAE 0XAT5809 1. These SAE O rings are used to create a tight seal when used in plumbing, hydraulics, air and other industrial applications. 2. 30 of the most common sizes from 1/8" to 1-3/4" ID

419 pcs Universal O -Ring Assortment Metric 0XAT5812 1. Special Metric kit for various industrial and automotive applications. A most useful standby kit for that unexpected mechanical problem. 2. Sizes: ID ø 3 ~ 50 mm

291


INTERIOR │BODYWORKS│ACCESSORIES 205 pcs HNBR O-Ring Assortment - SAE 0XAT5810 1. HNBR (Hydrogenated Nitrile Butadiene Rubber) 2. High tensile strength 3. Ideal for most automotive and refrigerant applications 4. Includes 18 of the most common sizes

300pc Snap Ring Assortment 0XAT5843 Internal 7/16" 15pc 5/8" 15pc 1/2" 15pc 3/4" 15pc 9/16" 15pc 13/16" 15pc

External 1/4" 20pc 5/16" 20pc 3/8" 20pc 7/16" 20pc 3/4" 20pc 5/8" 20pc

External cont 9/16" 20pc 1/2" 20pc 13/16" 15pc 7/8" 15pc 1" 15pc 1-1/4" 5pc

419 pcs Universal O-Ring Assortment -SAE 0XAT5811 1. Special SAE kit for various industrial and automotive applications. A most useful standby kit for that unexpected mechanical problem. 2. Sizes: ID ø 1/8 ~ 2 inch

555pc Cotter Pin Assortment 0XAT5844 Contents: 1/16"x1" 150pc 3/32x1-1/2" 100pc 1/8"x2" 50pc

/ / /

3/32"x1" 150pc 1/8"x1-1/4" 75pc 5/32"x2-2-1/2" 30pc

150pc HiBTh Pin Assortment 0XAT5845 Contents: 3/32"x 1-3/ 16" 42pc / 5/64"x 1-5/ 16" 30pc 5/64"x 1-9/ 16" 25pc / 7/64"x 1-5/8" 25pc 9/64"x 1-3/4" 20pc / 5/32"x 2-15/ 16" 8pc

292


INTERIOR │BODYWORKS│ACCESSORIES 720pc Lock, Spring & Star Washer Assortment 0XAT5846 Contents: #6 50pc (Each Style) / #8 50pc (Each Style) #10 50pc (Each Style) / 1/4" 40pc (Each Style) 5/16" 30pc (Each Style) / 3/8" 20pc (Each Style)

120pc Roll Pin Assortment 0XAT5847 Contents: - 1/16" x 3/16" , 1/16" x 5/16", 1/16" x 3/4" 4pc - 5/64" x 1/4" , 5/64" x 1/2" , 5/64" x 1" . 4pc - 3/32" x 5/8" , 3/32" x 1" , 3/32" x 1-1/4" 4pc - 1/8" x 5/8". 1/8" x 1" . 1/8" x 1-1/4", 5pc - 5/32" x 5/8" , 5/32" x 1" , 5/32" x 1-1/2" 4pc - 3/16" x 5/8" . 3/16" x 1" . 3/16" x 1-1/4" 5pc - 7/32" x 5/8" , 7/32" x 1-1/4" , 7/32" x 1-3/4" 4pc - 1/4" x 5/8" , 1/4" x 1-1/4", 1/4" x 1-3/4" 4pc - 5/16" x 3/4" , 5/16" x 1-1/2" , 5/16" x 2" 4pc - 3/8" x 3/4", 3/8" x 1-1/2" , 3/8" x 2" 2pc

200pc Spring Assortment 0XAT5848 - Compression Springs 7/32" x 11/16" 10pc / 7/32" x 1-1/2" 10pc 9/32" x 1/2" 10pc / 9/32" x 3/4" 10pc 1/4" x 13/32" 10pc / 23/64" x 1-3/8" 8pc 3/8" x 5/8" 6pc / 3/8" x 3/4" 12pc - Extension Springs 3/16" x 1-3/4" 8pc / 5/32" x 3-1/8" 12pc 13/64" x 13/16" 10pc / 7/32" x 1" 10pc 9/32" x 1-1/2" 10pc / 9/32" x 2-1/16" 12pc 11/32" x 1-27/32" 12pc / 11/32" x 1-7/16" 10pc 1/4" x 7/8" 10pc / 5/16" x 1-1/8" 8pc 5/16" x 1-1/4" 10pc / 5/16" x 1-3/4" 12pc

Door Jammer 0XAT5128 1. Holds door ajar while working on or around door-skins or door-struts 2. Prevents inadvertent damage to adjacent panels 3. Ideal for sanding, painting and practically any work around door edge

Plastic Rivet Insertion Tool 0XAT5054 - Easy works on plastic revit for one hand operation. - Universal nose piece suitable for all sizes of plastic rivets. - Supplied with 4 packs of plastic rivets. - Rivet Sizes: 10pc x Ø6.6 x 17.2mm, 10pc x Ø6.3 x 25.2mm, 10pc x Ø5 x 15.8mm, 10pc x Ø5 x 17.2mm

293


INTERIOR │BODYWORKS│ACCESSORIES Windshield Removal Kit 0XAT5046 1. 72 feet Triangle Wire 2. 2 pc Wire Gripping Handles 3. Windshield Removal Tool 4. Wire Feeder Tool 5. Trim Pad Remover 6. Windshield Molding Release Tool for GM

2 PCS Wire Gripping Handles 0XAT5050A 1. Holds windshield wire quickly and easy. 2. Use with braided, round or square wire.

Suction Lifter With Tress Vacuum Cups 0XAT5059 1. The kit combines vacuum cup and ratcheting tie-down to provide a safe and comfortable removal way of any piece of glass for user. 2. Each vacuum cup is designed to swivel up and down 30°, and so the cups will fit any glass with a radical curve. Kit contains one 1" x 12' ratcheting tie-down and two suction lifters with two vacuum cups.

Heavy Lift Suction Cup With Vacuum Grip Indicator 0XAT5061 1. Includes protective carry case and protect cover. 2. 8” Vacuum Cup-Plastic Handle. 3. All-metal handle/pump assembly with flat pad for flat surfaces. 4. Vaccum leakage indicator with suction quick release button.

7" Pump Vacuum Suction Cups 0XAT5064 1. Diameter: 178mm, 7” 2. Loading Capacity: 35KGS 3. 7" Vacuum Cup-Plastic Handle 4. Steel and plastic handle/pump assembly with flat pad for flat surfaces 5. Vacuum leakage indicator with Suction quick release button.

7" Pump Vacuum Suction Cups 0XAT5064A 1. Diameter: 178mm, 7” 2. Loading Capacity: 35KGS 3. 7" Vacuum Cup-Metal Handle 4. All-metal handle/pump assembly with flat pad for flat surfaces 5. Vacuum leakage indicator with Suction quick release button.

294


INTERIOR │BODYWORKS│ACCESSORIES Nylon Cable Tie

Item No. 0XAT5819T 0XAT5819B 0XAT5820T

1. Technical Data - Material -- Nylon 6.6 - Flammability -- UL 94V-2 - Working Temp.-- -40℃ to 85℃ 2. Characteristics and Benefits - Smooth round edge does not cut the insulation or hands; comfortable to work with - Easy pick-up, low insertion and pull-up - Closely spaced position-locking teeth allows fine accurate adjustment to tie bundle - Special four-teeth design reinforces the fixation of the head and average tensile strength higher than UL standard - Absolutely secure lock ; Long service life - Outstandingly tough in cold and dry weather, does not Dia. Tensile Strength become brittle or porous at low temperature Length (mm) Width (mm) Bundle (mm/ inch) kg(lbs) - Resistant to oils, grease, fuels and many other organic materials 56 / 2.12 199 (±1.99)

0XAT5820B 0XAT5821T 0XAT5821B 0XAT5822T 0XAT5822B

68 / 2.68

250 (±2.5) 4.5 (±0.25)

22 (50)

288 (±2.88)

81 / 3.18

371 (±3.71)

106 / 4.17

3. Application - Automotive - Automotive workshops - Electrical - Construction sites - Panel building - Installation - HVAC 4. COLOR OPTIONS: Stock in natural & black (other colors & size are also available)

Cable Tie Mount (Screw Fixing) 1. Technical Data - Material -- Nylon 6.6 - Flammability -- UL 94V-2 - Features -- Screw or rivet installed 2. Characteristics and Benefits - Easy to install with a screw or bolt, gives excellent security, - especially in conditions of high vibration when applied in conjunction with cable ties. - Offer maximum stability and rigidity to the wire bundle. 3. Application - Designed specially for holding heavier cable bundles. - Can be used in many industries from agriculture to truck manufacture. - Offer a very secure fixing and can be used with a wide variety of heavy duty cable ties. 4. COLOR OPTIONS: Nature & Black

Item No.

Length mm (inch)

Width mm (inch)

Height mm (inch)

Bmm (Ø)

Mounting

Used with Cable Tie Series

0XAT5823A

19.1 (0.75”)

12.7 (0.50”)

3

4.40

#8

I.S

0XAT5823B

15.0 (0.59”)

10.0 (0.39”)

7

3.70

#6

M.I.S

0XAT5823C

22.8 (0.90”)

16.0 (0.63”)

10

6.40

#14

M~HD

0XAT5823D

19.0 (0.75”)

9.5 (0.37”)

5

3.70

#6

M.I.S

295


INTERIOR │BODYWORKS│ACCESSORIES Wrench Holder Forward Type 0XATA118A

8PC

0XATA119A

12PC

0XATA121A

15PC

Material: TPR Color: Red

Wrench Holder Forward Type 0XATA118B 8PC 0XATA119B

12PC

0XATA121B

15PC

Material: TPR Color: Red

Stubby Wrench Holde 0XATA122A 5PC 0XATA122D 8PC 0XATA122B

6PC

0XATA122E

11PC

0XATA122C

7PC

0XATA122F

12PC

Material: TPR Color: Red

26PC 1/4"Dr. SAE Magnetic Socket Holder 0XATA124A 1. Material: P.P. with ferrogum 2. Color: Red 3. For 13pc regular socket and 13pc deep socket size 4. Dimension: 235 x 55 x 35mm 5. Slot for 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8"

26PC 1/4"Dr. Metric Magnetic Socket Holder 0XATA124B 1. Material: P.P. with ferrogum 2. Color: Blue 3. For 13pc regular socket and 13pc deep socket size 4. Dimension: 235 x 55 x 35mm 5. Slot for 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm

296


INTERIOR │BODYWORKS│ACCESSORIES 26PC 3/8"Dr. SAE Magnetic Socket Holder 0XATA124C 1. Material: P.P. with ferrogum 2. Color: Red 3. For 13pc regular socket and 13pc deep socket size 4. Dimension: 360 x 85 x 34mm 5. Slot for 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1“

30 PC 3/8 "Dr. Metric Magnetic Socket Holder 0XATA124D 1. Material: P.P. with ferrogum 2. Color: Blue 3. For 15pc regular socket and 15pc deep socket size 4. Dimension: 360 x 85 x 34mm 5. Slot for 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20mm

16 PC 1/2"Dr. SAE Magnetic Socket Holder 0XATA124E 1. Material: P.P. with ferrogum 2. Color:Red 3. 15 pcs 1/2" dr. sockets & 1 pc Adaptor 4. Dimension: 360 x 85 x 34mm 5. Slot for 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1, 1-1/16, 1-1/8, 1-3/16, 1-1/4“

19 PC 1/2 "Dr. Metric Magnetic Socket Holder 0XATA124F 1. Material: P.P. with ferrogum 2. Color: Blue 3. 18 pcs 1/2" dr. sockets & 1 pc Adaptor 4. Size: 360 x 85 x 34mm 5. 18 pcs 1/2" dr. sockets & 1 pc Adaptor 6. Slot for 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27mm

19 PC 1/2 "Dr. Metric Magnetic Socket Holder 0XATA124G 1. Material: P.P. with ferrogum 2. Color: Red 3. 18 pcs 1/2" dr. sockets & 1 pc Adaptor 4. Size: 360 x 85 x 34mm 5. Slot for 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27mm

297


INTERIOR │BODYWORKS│ACCESSORIES Quick Lock Socket Rail 0XATA112A 1/4"Dr.Quick lock Aluminum Socket Rail 1/4" x 300m/m x 10pc Color: Color: Red or Blue rail/Black clip Material : Aluminum/Nylon/Magnetic

0XATA112B 3/8"Dr.Quick lock Aluminum Socket Rail 3/8" x 300m/m x 10pc Color: Red or Blue rail/Black clip Material : Aluminum/Nylon/Magnetic

0XATA112C 1/2"Dr.Quick lock Aluminum Socket Rail 1/2" x 300m/m x 10pc Color: Red or Blue rail/Black clip Material : Aluminum/Nylon/Magnetic

Easy-Pick Magnetic Socket/ Bits Tray 0XATA115A 1/4"Dr. MAGNETIC SOCKET TRAY ABS HIGH-IMPACT PLASTIC For 1/4" drive chrome and impact sockets. sockets compartments hold socket up to 5/8" or 14mm

0XATA115B 3/8"Dr. MAGNETIC SOCKET TRAY ABS HIGH-IMPACT PLASTIC For 3/8" drive chrome and impact sockets. sockets compartments hold socket up to 1" or 24mm * No magnetic strip at back DEEP & REGULAR SOCKETS

0XATA115C 1/2"Dr. MAGNETIC SOCKET TRAY ABS HIGH-IMPACT PLASTIC For 1/4" drive chrome and impact sockets. sockets compartments hold socket up to 1-1/2" or 32mm

Socket Retaining Rail Set 3pc - 1/4", 3/8" & 1/2"Sq Drive 0XATA108 1. 410mm Rails each fitted with sixteen adjustable socket clips. 2. Drilled rails allow wall mounting or cabinet fixing.

298


ELECTRICAL Spark Plug HT Tester 0XAT7054 1. Probe type tester checks HT supply to spark plug 2. Suitable for all spark ignition engines 3. Quick and simple fault diagnosis

Multi Voltage Glow Plug Tester 0XAT7140 1. Voltage supply by 9V batter 2. Tester probe / clip are easy to replace 3. Initialization for different testing probe / clip 4. Auto switch off

Power Probe Lead Set 6 - 24 Volt 0XAT7001 Set includes: 4-10 gauge flexible leads; 30cm (2), 90cm, 180cm 1- High current 4mm shrouded plug & jacks 2- Adapters stacking plugs,Male/Male & Female/Female 1- Auto Probe

Auto Circuit Tester Kit 0XAT7002 1. This is an equipment used to test the automotive electrical system within 6 to 24V 2. Determine the polarity and circuit circumstance (short/open) 3. Activating the components with positive or negative current without jumper wire 4. Testing the voltage and continuity of the circuit illumination 5. Include a cigarette lighter adapter, a hook-up clip, an extension probe (85mm), and extension 20 feet lead

Auto Circuit Tester with LCD Display 0XAT7003 1. Checks from 6 to 24V system with LCD display and LED flashlight 2. Test the automotive electrical system within 6 to 24V 3. Determine the polarity and circuit circumstance (short/open) 4. Activating the components with positive or negative current without jumper wire 5. Set includes cigarette lighter adapter, a hook-up clip, an extension probe (85mm), and extension 20ft lead

299


ELECTRICAL Circuit Tester - Extra Long Probe 0XAT7008 1. Suitable for testing 6, 12 and 24Volt DC electric circuits 2. 195mm Insulated probe with pointed tip, tests through wire insulation 3. Supplied with 3mtr coiled cable and insulated crocodile earth clamp

Heavy Duty Circuit Tester 0XAT7009 1. Suitable for testing 6, 12 and 24Volt DC circuits 2. Insulated, pointed probe tests through wire insulation 3. Supplied with 1.5mtr cable and crocodile earth clamp

LED Circuit Tester 0XAT7010 1. Probe tool allows continuity and polarity tests to be carried out quickly and eďŹ&#x192;ciently on 6, 12 and 24 Volt systems 2. Positive/negative polarity indicated by red/green LEDs respectively 3. Supplied with 1.5mtr cable and shrouded earth clip

Test Lead Kit 90pc 0XAT7012 - Contents: Potentiometer; LED Array; 2-Colour 2-Way, SRS Connector x 2, Alligator Clip x 2, Probe x 2, Back Probe x 4, Connectors;1:2 Connector x 2; 1:1 Connector/Cables (Piggy-Back) x 4, Connector Lead Sets, Round Terminals with Banana Socket; Male/Female 3 each; 1.5, 2.0, 3.5, 4.0mm, Flat Terminals with Banana Socket; Male/Female - 0.8 (x3), 1.2 (x4), 2.0 (x4), 2.5 (x3), 3.0 (x4), 5.0 (x3), 6.0mm (x3) Potentiometer; LED Array; 2-Colour 2-Way

Auto Electronic Protection Device- 12 Volt 0XAT7013 1. Designed to prevent damaging voltage spikes and surges reaching delicate vehicle electronics 2. Fitting recommended before any routine workshop maintenance 3. Fitted with heavy-duty, fully insulated battery clips 4. For 12V system Connects easily to battery terminals

300


ELECTRICAL Cordless Circuit Tester 0XAT7016 1. Suitable for testing DC circuits with voltages from 3 and 28 Volts 2. Tester illuminates LED, buzzes and vibrates on contacting live wire 3. Computer-safe for use around delicate engine management systems

Cordless Circuit Tester LCD Polarity 6-28V 0XAT7017 Suitable for testing DC circuits with voltages between 6 and 28Volts 1. No earth clips to get tangled - simply contact the wire to test and touch your finger on bare metal ground to get a reading 2. Liquid crystal display shows ‘CIRCUIT OK’and indicates polarity of circuit contacted i.e. ‘+’ or ‘-’ 3. Computer-safe for use around sensitive engine management systems

Test Lead Set 15pc 0XAT7018 1. Professional set of test leads and components suitable for testing and evaluating automotive electronic circuits on modern vehicles 2. Features 0.7mm back probes ideal for testing vehicle sensors and dual colour LEDs for directional polarity testing 3. Set includes standard Ø4mm banana style plugs and sockets suitable for use with most diagnostic multimeters and test equipment 4. Contents: LED Leads x 2 Back Probes x 4 Alligator Clips x 2 Standard Probes x 2 Connector/Cables(Piggy-Back) x 4 Spring Loaded Piercing Clip

6-24V Circuit Tester - Brass 0XAT7019 1. Solid brass body with a test light 2. Prod tip is covered a brass protective screw cap 3. 850mm cable with a alligator clip on the end

Battery/Alternator Tester 12V LED 0XAT7023 1. LED Indicators verify condition of battery and alternator 2. Suitable for 12Volt DC systems 3. Magnetic backing sticks to metal surfaces for hands-free operation 4. Fitted with 900mm cable, probe and crocodile clips

301


ELECTRICAL Circuit Tester 3-48V 0XAT7024 1. Suitable for testing electrical circuits from 3 to 48Volt DC 2. Integral, spring loaded, pointed probe for testing through insulation 3. Twin LEDs indicate live circuit and polarity 4. Supplied with 0.9mtr cable and insulated crocodile earth clamp

Circuit Tester 6/12/24/48V LED 0XAT7053 1. Suitable for 6, 12, 24 and 48Volt AC and DC circuits 2. LED array indicates polarity and voltage range 3. Supplied with 850mm cable and crocodile earth clamp

Auto Probe Excel Kit 6-24V 0XAT7055 1. Includes ďŹ&#x201A;exi extension cable, crocodile clip, wire probe and back-probe 2. Find bad earths, breaks in continuity and short circuits quickly and easily 3. Comprehensive 6-24V DC test kit 4. Can even power up components on and oďŹ&#x20AC; the vehicle

Circuit Tester with Light & Cigarette Lighter Connector 6-24V 0XAT7056 1. Tests polarity and is suitable for 6-24V DC circuits 2. Positive/negative polarity indicated by red/green LEDs respectively 3. Features integral work light to aid use in dark areas, such as under dashboards 4. Allows the tester to be plugged straight into the vehicles cigarette lighter or connected to the battery 5. Supplied in storage case

Auto Probe Plus 6-24V 0XAT7060 1. All features of the Auto Probe but with an integral work light to use in dark engine bays plus an audible circuit tester when the LED on probe cannot be seen 2. Fitted with 4.5mtr cable allowing access to rear of the vehicle

302


ELECTRICAL Auto Probe 6-24V 0XAT7061 1. A brilliant tool for the auto electrician and mechanic 2. Carry out the following tests on systems from 6Volt up to 24 Volt quickly and efficiently 3. Fitted with a sensitive short circuit protection device 4. Safe to use around vehicle’s electronic management systems 5. Fitted with 4.5mtr cable allowing access to the rear of the vehicle

Non-Contact Voltage Detector 100-600V 0XAT7062 1. Voltage detector with on/off switch and three sensitivity settings 2. Multi-directional flashing red LED and buzzer indicate AC voltages between 100-600Volts 3. Quick, accurate detection of cable breaks in open-ended cables, e.g. cable drums 4. Ideal for microwave applications and checking socket connections 5. Fitted with pocket clip and supplied with 2 x LR44 cells 6. Operating Temperature: -10°C to +55°C at RH <80% 7. Overvoltage Category: CATIII/600V 8. Frequency Range: 50-400Hz 9. Display: Red LED 10. Voltage Range: 100-600V 11. Dimensions: 18 x 150mm

Data Saver PRO 6-24V 0XAT7064 1. Prevent data loss in onboard electronic systems when changing thebattery. 2. Dual inputs and outputs - use with cigar lighter or battery clamps. 3. Surge protection on output. 4. Ready indication-checks cigar lighter fuse on both vehicles Audible spike indication.

Integrated Test Light/Voltmeter 3-48V 0XAT7065 1. Test light and voltmeter in one tool 2. LCD meter draws minute currents making this tool safe to use around delicate electronic components 3. With a range of 3-48V DC, this tool is suitable for motorcycle, car and HGV applications 4. Includes interchangeable probes, leads and clips with Ø4mm banana-type quick couplings 5. Contents: Large Clamp, Crocodile Clip, 65mm Probe, 175mm Probe, Ø4mm Banana-Type Straight Connecto

303


ELECTRICAL Voltage Tester 140mm / 190mm 0XAT7066 1. Mains voltage tester with screwdriver blade and pocket clip 2. Fully insulated with moulded transparent plastic handle and blade sheath 3. 0XAT7066-01 Testing Range : 100-250V Length: 140mm 0XAT7066-02 Testing Range : 100-250V Length: 190mm

Auto Current/Voltage Tester 0XAT7069 1. Fast, accurate and safety current measurement at the fuse box 2. Ideal for fault-finding on car and commercial vehicle electrical circuits 3. Features large LCD display 4. Current test: Maximum load: 20A/48V DC for 10 seconds Accuracy: ±2%, or 0.2 reading with a decimal point 5. Voltage test: Test range: 1 to 48V Accuracy: ±1% or 0.1 reading with a decimal point

Auto Circuit Tester 0XAT7071 1. Determine the polarity and circuit circumstance (short/open) 2. Activating the components with positive or negative current without jumper wire 3. Testing the continuity of the circuit 4. Measuring freguency of high-tension ignition pluses and could calculate the rotational speed of engine according to measure frequency

Terminal Tester Kit 14Pcs 0XAT7073 1. 1-6ft circuit tester 2. 14-Terminal adapter kit 3. 1-Banana socket 4. 1-Testing needle 5. 2-Alligator

Circuit Tracer Detector 0XAT7125 1. Designed to identify and trace wires or cables without damaging the insulation, just simply attach the sender unit to the circuit and follow the wires using the detector 2. There are a sender and a receiver included in the instrument 3. Checking for short-circuit 4. Suitable for all DC circuits up to 42V 5. Locating open-circuit 6. Battery voltage indication 7. Two 9V batteries required

304


ELECTRICAL Insulator Pierce Through Clip 0XAT7145 - 2PCS, 1 red and 1 black - By clipping the wire this clip, the needle with the clip will pierce through the wire, and so user can test the system without unplug the wire or clear all the insulator

Vehicle Actuator Tester 0XAT7146 1. This device is design to test electronic components actuate by magnetic field or electronic magnetic field 2. Devices like actuator, ignition coil, AC generator, indoor air blower, valve controller EGR (exhaust gas control), injector, spark plug, relay, and hall effect sensor are such which can be tested 3. Description: - Positive and Negative sensor - Two Sensitive Level Indicator: Red LED- Strong Yellow LED-Weak - Power Indicator: Green LED - Power supply: AA 1.5V x 2pc

Auto Circuit Tracer 0XAT7147 Auto circuit tracer is an easy carry and operation equipment for car maintenance. The main function for the equipment is to searching and diagnosing the short / open circuit of vehicle’s circuit connection, another function is to identify the wire connection from whole vehicle’s circuit connection. - Suitable for all DC circuits up to 42V - Checking for short circuit - Locating open circuit - With illumination mode - 9V battery x2 required

Switching Power Charger 12V 0XAT7015 1. Your best choice by price decision 2. ABS housing 3. Electronic tact switch control/LED indicators 4. Over Tomperate Protection(OTP)/Over Current Protection(OCP) 5. Battery type selection:Regular/Deep Cycle(12V only)

Switching Power Charger Flashlight 0XAT7043 1. American style drop tester 2. Load applied by internal switchgear - no sparking! 3. Suitable for 6 and 12Volt batteries 4. Applies load across cells and measures output on meter 5. Accurate indication of battery voltage, faulty cell and short circuited

305


ELECTRICAL Battery Carrier 0XAT7045 1. Tubular steel handle with comfort grip 2. Enables fast, safe handling of batteries 3. Fully adjustable for battery size 4. Min./Max. Battery Size: 100mm - 180mm

Battery Post & Terminal Cleaner 4-Way 0XAT7048 1. Removes heavy corrosion build-up on battery posts and terminals for improved electrical contact 2. Features clamp reamer and terminal scrapers

Battery Post & Terminal Cleaner 0XAT7051 Wire brushes remove corrosion build-up on battery posts and terminals for improved electrical contact

Pocket Brake Fluid Tester 0XAT2031 1. Electrolytic tester. 2. Integrated circuitry checks moisture content of fluid by measuring the electrical resistance and comparing it with acceptable limits. 3. Easy calibration check using water. 4. Three LED read-out. 5. Switch on and insert probe for immediate result 6. Red LED warns when battery is low and needs replacing 7. Uses 1.5Volt AAA cell - included

Brake Fluid Tester 0XAT2081 1. Pen sized fluid tester is a very handy tool for master and service technicians. 2. With brake fluid tester W0040 to check quickly and precisely water percentage 3. In glycol based brake fluid: Five LED’s indicate exactly water percentage in brake fluid as following : 0 %, < 1 %,approx. 2 %, approx. 3 % and > 4 %. 4. You can recognize exactly when the brake fluid must be changed 5. The tester has a self check mode.

306


ELECTRICAL Infra-Red Thermometer 0XAT7040 1. Ultra low power consumption in shutdown mode. 2. Extended long time measuring reliability. 3. Laser sighting On/Off is switchable. 4. High DS ratio. 5. Backlit LCD display.

Folding Radio Release Key Set 0XAT8080 1. 18 tools in one 2. Updated set of tools for safe, fast, authorised release of fitted radios 3. Composite handle allows firm and comfortable grip

36 pcs Folding Type Radio Removal Tool Set 0XAT8208 36-Piece universal tool set for installing and removing car radio's and multimedia systems

Radio Release Tool Set 46pc 0XAT8081 1. Comprehensive set of high quality tools suitable for authorised release and removal of in-car entertainment units 2. Professional, heavy-gauge materials with chrome finish ensure these tools will not distort in general use 3. Application: Becker, Clarion,Kenwood, Sony Grundig and Blaupunkt.

Radio Removal Tool Kit 10pc 0XAT8082 1. Designed to help authorised audio specialists remove in-car sound systems 2. Complete with a storage wallet 3. Applications: Audi / BMW / Ford / Mercedes-Benz / Volkswagen

307


ELECTRICAL Radio Release Tool Set 18pc 0XAT8086 1. Updated set of specialist tools for the safe, fast, authorised removal of ďŹ tted radios 2. Supplied in wallet 3. Applications: Alfa, Alpine, Audi, Becker, BMW, Citroen, Clarion, Fiat, Ford, Grundig,JVC,Mercedes, New Blaupunkt, Peugeot, Pioneer, Porsche, Renault, Vauxhall/Opel, VDO, VW

Dashboard Service Kit- BMW / Mercedes 0XAT8099 1. Designed to help authorised audio specialists remove in-car sound systems 2. Complete with a storage wallet 3. Applications: Audi / BMW / Ford / Mercedes-Benz / Volkswagen

Radio Release Master Tool Kit 53pc 0XAT8108 1. Completed 52pc set suitable for most of vehicles 2. Applications: Audi, Ford, VW (Old), Audi, Mercedes, Porsche, VW (Becker), BMW (Screw), BMW, Vauxhall/Opel (Hex Key), Fiat -Bravo Brava, Skoda (New), Becker (New), JVC, Vauxhall/Opel (Grundig Blaupunkt), PK-Clarion,RK-Kenwood, RK-Kenwood 01, Sony, Panasonic (Pre 2006), Panasonic (2006on) Pioneer, and Sony II (2002 on)

Stereo/ Sat Nav Removal Set 32pc 0XAT8113 1. Comprehensive set of tools for Becker, Clarion, Kenwood, Sony Grundig and Blaupunkt 2. For the removal of most popular car stereo and navigation systems

Radio Release Tool Kit 46pc 0XAT8114 Updated comprehensive set of tools for release and removal of in-car entertainment units on popular vehicles

308


ELECTRICAL 0XAT7005

Relay Pliers Straigh Tip

0XAT7006

Relay Pliers Angled Tip

1. Heavy-duty pattern pliers with positive vinyl grip handles 2. Designed for installation and removal of most types of relays 3. Applications: 0XAT7005- VW/Audi, Opel, Ford, Mazda, Nissan,Man, Iveco, Mercedes-Benz, etc. 0XAT7006- Suitable for Opel, Renault & Nissan

Wire Piercing Guide Clip 0XAT7032 1. Designed to guide the point of a test probe to the centre of a wire when testing vehicle wiring 2. Saves your ďŹ ngers and eliminates the risk of damaging the wiring loom when carrying out electrical diagnostics 3. Three wire gauge size guides

Remote Starter Switch Terminal Tool 0XAT7081 1. One-man operation, suitable for turning the engine over for various diagnostic tasks such as compression testing 2. Connects to the starter system with push button activation 3. Features a connectivity LED and 1.5mtr cable

Terminal Tool Set 6pc 0XAT7025 1. Compiled for the terminal connectors on most French car 2. Use on BMW, Chrysler, Fiat, Ford, General Motors, Man, Porsche, Saab, & VAG 3. Tools are spring loaded to assist with the removal of terminals 4. Simply pull the tool and bend, releasing the side locking slot

Terminal Tool Set 15pc 0XAT7026 1. Reduce time spent on, and damage to, vehicle electrical systems with these connector tools 2. Set consists of cable extraction, contact ejection and contact dismantling tools covering a wide range of connectors, including Kabelex, Micro-Timer II and III, Maxi-Power Timer and Pit-Pod 3. Vehicle coverage includes BMW, Daimler/Chrysler, Fiat, Ford, MAN, Mazda, Porsche, PSA, Renault, Saab, Seat, Skoda, VAG,Vauxhall/Opel

Terminal Tool Set 12pc 0XAT7027 1. Specialist set for Audi / Seat / Skoda / Volkswagen vehicles 2. Use on : BMW / CitroĂŤn / Chrysler / Daimler /Fiat / Ford / General Motors / Man /Mazda / Porsche / Renault / Saab 2. Simply pull the tool and bend, releasing the side locking slot 3. Spring loaded to assist the removal of terminals

309


ELECTRICAL Terminal Tool Set 17pc 0XAT7035 1. Special set for Opel / Vauxhall 2. Suitable for some connectors in the BMW, Daimler, Chrysler, Fiat, Ford, Honda, Jaguar, Opel, Mazda, Mercedes Benz, Mitsubishi, Porsche PSA, Renault, Saab, Toyota, Volvo, VAG 3. For round contacts with diameter 1.5, 2.3 and 3.5 mm 4. Contacts with one locking lugs 0.63/1.6, 2.8/5.8, 0.8, 1.5 and 6.3 mm 5. Also for contacts with two symmetrically locking lugs in 1.6, 2.8/5.8, 1.5/2.8, 4.8/6.3, 2.8/5.8 and 9.5 mm

Terminal Extraction Tool Kit 2pc 0XAT7067 1. Pack of 2 handy tools for disassembling terminal connectors 2. Essential companion for the automotive engineer and mechanic 3. Handy toolbox size

Terminal Tool Kit 12pc 0XAT7046 1. Suitable for the removal of vehicle computer connectors and terminals 2. Designed for GM C3 systemsk 3. Application for safe and fast removal of terminals on vehicles 4. Colour coded aluminium handles make for easy identiďŹ cation

Terminal Tool Kit 19pc 0XAT7047 1. A comprehensive Terminal Tool set incorporates up to minute products for use on standard WeatherPack and Pack Con terminals 2. The latest tool use on VW/Audi vehicles plus special tools for coolant sensors, wiring harnesses and terminal blocks on Chrysler, Hyundai, Kia and Mitsubishi vehicles 3. Remove the wires from terminal blocks without damage

Terminal Tool Kit 6pc 0XAT7072 1. Use on modern vehicles and a variety of applications 2. Transmission harness tools for Chrysler, Hyundai and Mitsubishi 3. Under bonnet tool for coolant sensors, etc. for Chrysler, Mitsubishi, Kia and Hyundai 4. Sheathing cutting tool for cutting wire harnesses 5. Tools to release tabs on modern terminal blocks plus tools for ABS ECU (35/55pin)

310


ELECTRICAL Terminal Tool Set 23pcs 0XAT8178 1. A comprehensive terminal tool set that incorporates up to the minute products for standard WeatherPack and Pack Con terminals 2. Use on new VW and Audi vehicles plus special tools for coolant sensors, wiring harnesses and terminal blocks on Chrysler, Hyundai, Kia and Mitsubishi vehicles, etc.

Electrical Clip Removal Tool Set 2pc 0XAT7070 1. Ideal for separating electrical connections 2. Vinyl coated handles 3. Suitable for Weather-Pack type connections 4. Supplied as set of two removal tools

LED / Ultra-Violet Inspection Light Master Kit 0XAT8508 Contents/ Applications: Pick-up tool 1. Super bright 400mm long flexible LED adaptor with magnetic pick-up tool 2. Fiberoptic adaptor that works with LED and UV nozzle 3. Super bright Ultra-Violet(UV) nozzle head & 400mm long flexible adaptor 4. LED Pen Light 5. Magnetic base to hold the LED/UV light in position 6. Supplied with 3xAAA batteries 7. Supply in plastic carry case

LED Inspection Light Kit 0XAT8509 1. Super bright 400mm long fexible LED Pen Light 2. Fiberoptic adaptor that works with LED and UV nozzle 3. Super bright Ultra-Violet (UV) nozzle head 4. Supplied with 3xAAA batteries 5. Supply in plastic carry case

LED Magnet Work Light 0XAT7142 1. Front Magnet (Stored in Tail Cap room when not in use) 2. Produce Auxiliary Side Illumination when Front Magnet in Use. 3. Flexible Shaft provides working areas at any angles and any orientations. 4. Durable Metal Connector 5. 3-Position (High/Low/Off) Switch Button 6. Battery Power Indicator - Turning from GREEN to RED when power is 15% less. 7. 1-Piece Strong Magnet Installed on Tail Cap Base.

311


ELECTRICAL Deluxe Noid Lite and GM Signal Test Light Kit 8pc 0XAT7029 - Economic way to check electronic fuel injection (EFI) signals. - Quickly and easily checks for systems of GM PFI, Bosch PFI Ford TBI, GM PFI, Geo TBI and GM SCPI. - To test just disconnect the fuel injectors, plug the Noid Lite into injector wiring harness then crank the engine. - Normal voltage is indicated by flashing light which is visible from passenger compartment.

Power Inverter 0XAT7116 1. DC input: 12V 2. Continue output power: 300W 3. Surge output power: 600W

Power Inverter 0XAT7117 1. DC input: 12V 2. Continue output power: 600W 3. Surge output power: 1200W

Power Inverter 0XAT7118 1. DC input: 12V 2. Continue output power: 1200W 3. Surge output power: 2800W

Power Inverter 0XAT7119 1. DC input: 12V 2. Continue output power: 2000W 3. Surge output power: 4000W

Power Inverter 0XAT7120 1. DC input: 12V 2. Continue output power: 3000W 3. Surge output power: 6000W

Techanic's Stethoscope 0XAT1060 1. Probe attachment quickly locates source of engine noise such as piston slap, worn gears and bearings, damaged valves, water pump failure, blown gaskets. 2. Rubber trumpet used when checking vacuum and pressure flow-ideal for balancing carburettors.

312


ELECTRICAL Brake disc measuring tool 0XCM1002 The Caliper (outer diameter gauge) for brake discs is universally suitable and designed to measure the diameter of brake discs without the need for removing the wheels from the vehicle. Advantages: • Allows for quick identification of the brake system. • Helps to eliminate the risk of ordering wrong brake pads or brake discs. • Reduces number of returns. • Allows professional and cost-effective brake-servicing work to be carried out. • Saves a lot of time.

Bolt Circle Gauge 0XAT6038 -Bolt Circle Gauge, Wheel Check Gauge, Wheel diameter guage. - Side rule style - Popular 3.4.5.6 lug bolt patterns

Wheel Alignment w/ Digital Protractor 0XAT6044 1. Perform portable , no heavy turntable ! One person operation. 2. Displays camber ; caster ; KPI ; toe 3. Includes gauge and wheel mount ( from 10” to 20” ) 4. Accurate, rugged and easy to use 5. Saves time and money !

Refractometer 0XAT7004 - Accurately measures the strength of battery fluid, screenwash and antifreeze by measuring the refractive index of light passing through the mixture. - Suitable for synthetic antifreeze mixtures. - Temperature corrected prism ensures accuracy. - Eyepiece with adjustable focus.

Auto Probe ( Battery Test) 0XAT7050 1. A simple tester for checking whether the battery will start the engine. 2. Just connect the crocodile clips and start. 3. The engine an instant guide to the performance of the battery and alternator

313


MOTORCYCLE 34mm Motorcycle Clutch Wrench 0XMT1008-01 1. Special 34mm 6 point socket wrench fitted with two pins for servicing clutches on motorcycle engines 2. Pin PCD: 59mm 3. Opening Size: 34mm 4. Pin Size: 11mm Round x 2 5. Length: 280mm

39mm Motorcycle Clutch Wrench 0XMT1008-02 1. Special 39mm 6 point socket wrench fitted with two pins for servicing clutches on mtorcycle engines 2. Pin PCD: 59mm 3. Opening Size: 39mm 4. Pin Size: 12mm Round x 2 5. Length: 280mm

41mm Motorcycle Clutch Wrench 0XMT1008-03 1. Special 41mm 6 point socket wrench fitted with two pins for servicing clutches on motorcycle engines 2. Pin PCD: 59mm 3. Opening Size: 41mm 4. Pin Size: 11mm round x 2 5. Length: 280mm

39mm Motorcycle Clutch Wrench 0XMT1008-04 1. Special 39mm 6 point socket wrench fitted with two pins for servicing clutches on motorcycle engines 2. Pin PCD: 72mm 3. Opening Size: 39mm 4. Pin Size: 12mm Round x 2 5. Length: 280mm

46mm Motorcycle Clutch Wrench 0XMT1008-05 1. Special 46mm 6 point socket wrench fitted with two pins for servicing clutches on motorcycle engines 2. Pin PCD: 72mm 3. Opening Size: 46mm 4. Pin Size: 12mm Round x 2 5. Length: 280mm

46mm Motorcycle Clutch Wrench 3 pin 0XMT1008-06 1. Special 46mm 6 point socket wrench fitted with three pins for servicing clutches on motorcycle engines 2. Pin PCD: 85mm Opening 3. Size: 46mm 4. Pin Size: 11.3mm Round x 3 5. Length: 280mm

314


MOTORCYCLE Clutch Locking Nut Removal Tool 20 / 24mm 0XMT1064 1. Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch 2. Manufactured from heavy-duty heat treated steel 3. Use on Honda motorcycles with 20 or 24mm lock nuts

Chain Cleaning Brush 0XMT1004 1. Brush for cleaning motorcycle chains with removable heads for cleaning and replacement 2. Because of the nature of the product it is classed as a consumable 3. Easy to remove heads for cleaning and replacing

Motorcycle Chain Breaker & Riveter 0XMT1014 1. Breaks and rejoins most types of chain quickly and easily 2. Suitable for most sizes of drive or cam chain from #35 to #630 3. Supplied with a range of pins and dies 4. Contents: Pins; 2.2/2.9/3.8mm,Pin Guide; 2.2 Upper, 2.2mm Lower, Riveter Pin, Anvil; 3, 6mm, Spring, Press Plate, Lever, Handle, Chain Press

Motorcycle Chain Cleaning Kit 0XMT1019 1. Designed to remove dirt from motorcycle chains 2. All four sides of the chain are cleaned at once by six stiďŹ&#x20AC; brush pads located in the tool 3. Use with proprietary degreaser 4. Maximum Chain Width: 14mm

Chain Splitter & Riveting Tool Set 0XMT1026 1. Comprehensive set designed to shorten and lengthen motorcycle chains by removing or replacing links 2. Use on horticultural and agricultural machinery 3. Includes tools designed for riveting and plate holder for connecting links accurately 4. Contents: Pin Holder, 27mm Fixed Shaft, 19mm Pin Head,U-Holder, Plate Holder, Pins-3, 4, 5mm;Anvils-3, 4, 5mm

Chain Link Pliers 0XMT1039 Slim jaws speciďŹ cally designed for the quick and easy removal and installation of chain pins (links)

315


MOTORCYCLE Chain Puller Tensioner 0XMT1061 1. A Motorcycle Chain Puller / Tensioner for removing and replacing chain links 2. The special jaws on Chain tensioner is designed to fit between the chain links allowing the link to be replaced or removed 3. Use on chain sizes: 428/520/525/528/530

Motorcycle Flywheel Puller Set 10pc 0XMT1007 1. Used to separate flywheel from the crankshaft taper 2. Contents: Includes 5 double ended pullersM28 x M26(1.0mm thread); M25(1.25) x M22(1.0); M27 x M24(1.0mm); M26 x M22(1.5mm); M27(1.25mm) x M20(1.0mm) 2 x single ended puller M28 x 1.5mm & M19 x 1.0mm Threaded bolts- M14 x 1.5mm; M16 x 1.5mm; M18 x 1.5mm

Motorcycle Flywheel Puller 0XMT1021 1. Designed with 6 different sized threaded adaptors for flywheel rings on motorcycles 2. Models with tapered lock type rings cannot be removed without use this specialized tool 3. Suitable for most types of motorcycle 4. Sizes: M10 x 1.25R, M14 x 1.5R, M16 x 1.5R, M18 x 1.5R, M24 x 1.0R, M27 x 1.0L

Flywheel Puller M24 x P1.5R 0XMT1072 1. Designed to remove lock nuts from motorcycle flywheels quickly and safely 2. Suitable for a variety of motorcycles 3. Applications: Honda; CRF150R (07-09), CRF250R (04-11), CRF250X (04-09), CRF450R (02-08), Kawasaki; KX250F (04-11), KX450F (06-08), Suzuki; RMZ250 (04-09), RMZ450 (05-07), Yamaha; YZ450F (06-09)

Motorcycle "T" Lock Wrench 0XMT1011 1. Double sided T lock wrench for use on locking the pulley nuts on motorcycle engine pulleys 2. Sizes: 14mm & 17mm Double Hex Openings

316


MOTORCYCLE Motorcycle Pulley Lock Nut Wrench 36mm 0XMT1012 1. Special designed Bi-Hex (12 point) lock wrench to suit pulleys fitted to motorcycle engines 2. Sizes: 33mm x 230mm long 3. Application: Suzuki scooter

Motorcycle Pulley Lock Nut Wrench 36mm 0XMT1013 1. Special 6 point socket wrench to suite castellated nuts fitted to pulleys on motorcycle engines 2. Sizes: 36mm x 230mm long 3. Application: Yamaha motorcycle

Universal Motorcycle Pulley Holder 0XMT1015 1. Suitable for holding flywheels and pulleys during removal and installation 2. Two sizes of pins 5mm one side and 9mm the other, with centre to centre distance ranging from 23mm to 227mm 3. Features a locking adjustment screw to keep tool at required set size 4. Overall Length: 328mm 5. Pin Sizes: 5, 9mm 6. Capacity: 23mm - 227mm

Universal Motorcycle Pulley Holder 0XMT1022 1. Suitable for flywheel and clutch pulleys on a large range of motorcycles 2. Adjusting screw allows tool to be locked at the required size 3. Diameter: Ø70-130mm 4. Length: 310mm

Motorcycle Pulley Holder 0XMT1023 1. Suitable for flywheel and clutch pulleys on a large range of motorcycles 2. Adjustable strap for use on different pulley sizes 3. Rotate handle so foot contacts against pulley to secure, and release rotate in the opposite direction 4. Capacity: 45-120mm

Valve Spring Compressor Set - Motorcycle 0XMT1045 1. Complete with 5 adaptors : 16mm/19mm/23mm/25mm/30mm 2. Suitable for a wide range of vehicles 3. Two sizes of threaded bar for wider applications 4. 100mm throat depth 5. Ideal for small engines motorcycles and quads, etc. 6. With carrying case

317


MOTORCYCLE Motorcycle Carburetor's Gauge 0XMT1010 1. Depth gauge is used to set and obtain the exact measurements for float level & pump rod travel on carburetors fitted to motorcycle engines 2. Graduations: 0-40mm 3. Length: 4 1/2" 115mm

Pilot Screw Adjusting Tool 0XMT1025 1. 460mm Tool gives deep access particularly suited to adjustment of motorcycle carburettors 2. 110° Angled head gives improved access to hard reach areas 3. One turn of handle equals one turn of slotted blade 4. Blade tip height is adjustable allowing it to be set in place during operation

Hose Remover Pliers (Motorcycle) 0XMT1063 1. For easy removal of 4-10mm Fuel & Vacnum Hose 2. The pliers have two different color of jaw; black & silver color, black color jaw for tube end & silver jaw for hose end 3. On the black jaw have a "DIGS" can into small tube & hose

Crankcase Separator 0XMT1020 1. A Motorcycle Crank Case Separator suitable for a variety of engines 2. Complete with 6 and 8mm mounting bolts 3. Spare parts available for the 6 & 8mm bolts and threaded bars

Motorcycle Clutch Spring Compressor 0XMT1065 1. Compresses the clutch spring enable clutch nut to be removed and replaced 2. 0XMT1065-01 Spread: 140mm Depth: 105mm 0XMT1065-02 Spread: 170mm Depth: 90mm

Clutch Spring Check Tool/Clutch Compression Tool 0XMT1066 1. Compresses the clutch spring enable the clutch nut to be removed and replaced 2. Spread: 165mm Depth: 95mm

318


MOTORCYCLE Motorcycle Coil Spring Compressor 0XMT1069 1. Motorcycle coil spring compressor manufactured from aluminum for strength and lightness 2. Supplied with 4 adaptors: 60mm/66mm/72mm/75mm for different size springs 3. Complete with eyelet and clevis adaptor

Motorcycle Oil Drain Pan 2.5ltr 0XAT2053 1. Heavy-duty polypropylene construction, ideal for draining oils and antifreeze 2. Sloped design to easily tip contents out of pan 3. Thin contoured design to prevent accidental movement while in use 4. Capacity: 2.5ltr

Motorcycle Oil Filter Wrenches - 3/8" Drive 0XMT1031 1. With flexible steel band to securely clamp filter 2. Design allows easy access to restricted area 3. Driven by 3/8" square drive recess 4. 0XMT1031-01 Capacity: Ø71-79mm 0XMT1031-02 Capacity: Ø87-95mm

Motorcycle Portable Fuel Tank 1ltr 0XMT1075 1. Useful when needing to remove fuel tank to perform maintenance on your motorcycle 2. Eliminates need to balance fuel tank in an awkward position 3. Simply remove your tank, connect the auxiliary fuel tank which is gravity fed and hang it up using the hanging hook provided 4. Features 1000ml tank, 1200mm hose, two hose clamps and on/off tap 5. Tank Size: 1000ml 6. Hose Length: 1200mm

Steering Tube Bearing Installer 0XMT1033 1. Safe and easy way to install lower steering bearing 2. Includes three aluminum dies and driver bar, to be used in conjunction with a soft head hammer

Motorcycle Steering Bearing Press 0XMT1034 1. Designed foe the correct installation of bearings on motorcycle 2. Seven adaptors for various bearing sizes 3. Size Range: 32-46mm 4. Soft grip handle 5. Includes bearing seating tool

319


MOTORCYCLE Motorcycle Coil Spring Compressor 0XMT1029 1. Designed speciďŹ cally for use on motorcycles 2. Manufactured in box section steel 3. Supplied with replacement claws 4. Comes complete with instructions 5. Presented in a metal tin

Motorcycle Coil Spring Compressor 0XMT1049 Professional motorcycle, hydraulic coil spring compressor for use mounted in workshop

Fork Seal Driver 0XMT1052 1. Designed for easy installation of fork seals 2. Limits potential damage done by other methods to the forks 3. Capacity: 35-50mm

Steering Stem Spanner 30/32mm 0XMT1053 1. Steering stem spanner suitable for use on Honda, Kawasaki, Suzuki and Yamaha motorcycles 2. Sizes: 30mm x 32mm 3. Applications: Honda, Kawasaki, Suzuki and Yamaha

Fork Cap Spanner 46 / 50mm 0XMT1054 1. Combination fork cap spanner suitable for use on Showa and twin camber forks 2. Sizes: 46mm x 50mm 3. Applications: Showa & Twin Camber Forks

Fork Cap Spanner 49 / 50mm 0XMT1055 1. Combination fork cap spanner suitable for use with on Kayaba, Showa and twin camber forks 2. Sizes: 49mm x 50mm 3. Applications: Kayaba, Showa & Twin Camber Forks

320


MOTORCYCLE Racer Axle Wrench 22 / 32mm 0XMT1056 1. Part of the motorcycle range this racer axle wrench fits Honda / Kawasaki / Suzuki and Yamaha motorcycles 2. Sizes: 22mm x 32mm 3. Applications: Honda, Kawasaki, Suzuki and Yamaha motorcycles

Racer Axle Wrench 22 / 27mm 0XMT1057 1. Part of the motorcycle range this racer axle wrench fits Honda, Kawasaki and Yamaha motorcycles 2. Sizes: 22mm x 27mm 3. Applications: Honda / Kawasaki and Yamaha motorcycles

Racer Axle Wrench 17mm / 24mm 0XMT1058 1. Part of the motorcycle range this Axle wrench fits Yamaha and Suzuki motorcycles 2. Sizes: 17mm x 24mm 3. Applications: Yamaha / Suzuki motorcycles

Racer Axle Wrench 17mm / 27mm 0XMT1059 1. Part of the motorcycle range this racer axle wrench fits Yamaha / Honda / KTM and Kawasaki motorcycles 2. Sizes: 17mm x 27mm 3. Applications: Yamaha / Honda / KTM / Kawaski

Motorcycle Spindle Tool 0XMT1002 1. Motorcycle front spindle removal tools 24mm/22mm/19mm 2. Use as a socket on the free end to remove the spindle 3. Sizes / Applications: 24mm - Susuki/Honda 22mm - Kawasaki 19mm - Yamaha

Motorcycle Spindle Tool Set 5pc 0XMT1038 1. Prevents spindle from spinning when tightening or loosening wheel nut 2. Features 1/2"drive adaptor and four hex bits for different sizes of spindle 3. Spindle Sizes: 17, 19, 22, 24mm

Motorcycle Spindle Tool - Steel 0XMT1040 1. Made from aluminium 2. This lightweight motorcycle spindle tool has 4 stepped sizes for modern motorcycles including BMW, Buell, Honda, Kawasaki, Suzuki, Yamaha 3. Use with 3/8"D tools or standard socket 4. Sizes: 17/19/22/24mm 5. Applications: Honda, Kawasaki, Suzuki, Yamaha

321


MOTORCYCLE Motorcycle Spindle Tool- Light Version 0XMT1041 1. Designed speciďŹ cally for use on motorcycles 2. Manufactured in box section steel 3. Supplied with replacement claws 4. Comes complete with instructions 5. Presented in a metal tin

Spoke Wrench Set 11pc 0XMT1050 1. Specially designed spoke wrench with nine interchangeable sized heads 2. Suitable for adjusting spoke tension and correcting buckled wheels 3. Heads included 5mm-6.8mm in 0.2 increments 4. Fits most bikes 5. Sizes: 5.0, 5.2, 5.4, 5.6, 5.8, 6.0,6.2, 6.4, 6.6, 6.8mm

Spoke Wrench Set 10pc 0XMT1051 1. Specially designed spoke wrench with nine interchangeable sized heads 2. Suitable for adjusting spoke tension and correcting buckled wheels 3. Sizes: 5.2, 5.4, 5.6, 5.8, 6.0, 6.2, 6.4, 6.6, 6.8mm

Motorcycle Wheel Spinner 0XMT1067 1. For the manual spinning of motorcycle wheels while servicing 2. Ideal for wheel cleaning 3. Roller bearings on a composite base 4. Adjustable

Motorcycle Rim Protector 0XMT1070 1. Designed to reduce the risk of damaging the motorcycle wheel rims when ďŹ tting or removing tyres 2. Soft material will not damage the rims 3. String line attachment for easy removal

Wheel Bearing Removal Tool Kit 9pc - Metric 0XMT1073 1. Dependable split collet design, includes 8pc metric drivers 2. Metric sizes allow use with metric applications 3. Available as individual components 4. Sizes: 10 / 12 / 15 / 17 / 19 / 20 /25mm

322


MOTORCYCLE Tyre Lever 300mm 0XMT1037 1. 300mm long 2. Suitable for tyres on motorcycles 3. Also suitable for tyres on other leisure vehicles 4. Manufactured from dropped forged steel 5. Moulded handle for easy comfortable use

Motorcycle Tyre Lever 355mm 0XMT1078 1. Drop-forged, sprayed and tempered steel finish for anti-corrosion resistance 2. Curved rounded tip for ease of use when rolling round the rim 3. Machine finished alloy handle enables extra grip and control when in use 4. Suitable for use on motorcycle, small agricultural or leisure tyres 5. Length: 355mm 6. Tip Width: 22mm 7. Handle Width: 30mm

Motorcycle Brake Piston Removal Pliers 0XMT1001 1. Drop-forged, sprayed and tempered steel finish for anti-corrosion resistance 2. Curved rounded tip for ease of use when rolling round the rim 3. Machine finished alloy handle enables extra grip and control when in use 4. Suitable for use on motorcycle, small agricultural or leisure tyres 5. Length: 355mm 6. Tip Width: 22mm 7. Handle Width: 30mm

Motorcycle Brake Piston Removal Tool 0XMT1003 1. Designed to drastically reduce the time taken when dismantling motorcycle brakes with sliding calipers 2. Removes frozen pistons with ease 3. Includes 12 universal adaptors 4. Sizes: 19-30mm 5. Will not mark or damage the working part of the piston

Ratchet Motorcycle Brake Piston Pliers 0XMT1062 1. For removal of siezed pistons without damaging outer piston surface 2. Knurled clamp blocks allow secure grip of inner piston face 3. Self-locking mechanism ensures tight grip on piston during removal

323


MOTORCYCLE Motorcycle Brake Piston Removal Locking Pliers 0XMT1076 1. Features locking funtion for non-slip operation 2. Clamp screw allows pliers to be fixed into cup of piston for added pulling power

Disc Brake Opening Tool 0XMT1028 1. Wedge shaped tool ideal for expanding the gap between brake pads to speed up pad replacement 2. Features moulded rubber handle enabling extra grip

Motorcycle Twin-Clamp Cable Oiler 0XMT1036 Twin clamp cable oiler for use with spray type silicone or oil on motorcycle cables

Adjustable Hook & Pin Wrench Set 0XMT1068 1. Specially designed for use with slotted retaining rings found on motorcycle suspension and other machinery. wrenches covering sizes 19-120mm 3. Pin sizes Ø4-8mm 4. Contents/Specifications: 5. Small Wrench: 19- 50mm Medium Wrench: 30- 75mm Large Wrench: 50- 120 mm Small/Medium Wrench Pin Ø: 4, 5, 6mm Large Wrench Pin Ø: 6, 8mm

Motorcycle Brake Piston Tool 0XMT1047 A brake piston rewind tool for the controlled retraction when changing the brake pads on many makes of Motorcycle 1. Plated working faces to reduce corrosion 2. Suitable for front and rear brakes 3. Dual size plates for ease of access 4. It is recommended the caliper bleed nipple is opened to prevent fluid being pushed back into master cylinder

324


TRUCK Injector Socket Set 4pc - HGV 0XAT1412 1. For removal and installation of truck and bus diesel injectors 2. Fits injectors on MAN, Mercedes, Neoplan and Setra 3. Contents: 1/2"DR. x 72mm x 4-Tooth, Hex 32mm x 70mm x 4-Tooth(M14 x 1.5 Receiver Thread), Hex 32mm x 122mm x 4-Tooth for MAN, Mercedes, Neoplan and Setra

MAN &BENZ Truck Diesel Injection Valve Socket 0XAT9040 1. Remove and install diesel injection valve 2. 1/2" Drive 3. Application: MAN(422/ 403), BENZ truck, SCANIA 4. Sizes(AxB): 28 x 22mm

Truck Injection Nozzle Socket 0XAT9058 1. Removes and installs diesel injected nozzle on most of trucks 2. Application: Man (422.403), Benz Truck, Scania

Automatic Transmission Clutch Compressor (4 Pins) 0XAT4126 1. Capacity: Clutch diameter from 64mm to 175mm. 2. Adjustable legs ďŹ t most cars and trucks for replacement of transmission rear clutch piston snap ring.

Oil Mist Separator Wrench 107mm - HINO 0XAT9060 1. HINO oil mist separator wrench(8 Ribs,107mm), 1/2" Dr. 2. Application: HINO truck year 2003~2006 or after 2010 3. Genuine no: 103251,S23401-11840-A 4. Using the oil-water separator wrench 5. Looped handle 6. Japanese truck repair tool

Oil Mist Separator Wrench 109mm - FUSO 0XAT9061 1. Fuso oil mist separator wrench (8 ribs, 109mm), 1/2" Dr. 2. Application: FUSO 380 over 17 tons (Engine no 6M70) and bus 3. Mitsubishi all NEW CANTER eco-4 3.5 / 6.7 / 6.9tons

325


TRUCK Radiator Quick Coupler For Scania 0XAT9071 1. Designed for removing the cooling system coupler on Scania Trucks and Buses Knurled connector for ease of use 2. Quick coupler for filling radiators on HGVs 3. Application: Scania 4/5 series

Volvo Truck Fan Bearing Base Socket 0XAT9204 1. 3/4" square drive, inner diameter= 53.5mm 2. Special profile with 4 internal studs 3. Applicable for Volvo trucks.

Truck Diesel Injection Socket 0XAT1398 1. Installing and removing diesel injection nozzle on Mercedes-Benz, Man and Scania commercial vehicles 2. Complete with M14 puller 3. Makes the task easy

VOLVO Rear Wheel Shock Absorber Spring Washer Removal 0XAT9006 1. To removing the absorber spring washer on Volvo vehicle rear-wheel 2. Drive: 27mm Hexagon

MAN&BENZ Differential Rear Nut Socket - 3/4" Drive 0XAT9041 1. Remove differential rear nut 2. Application: MAN, Benz truck 3. Size(AxBxCxD): 101 x 126 x 113 x 8.7mm

Rear Wheel Shock Absorber Spring 28.5mm Washer Removal Socket

Front Wheel Shock Absorber Spring Washer Removal Socket 3/4" Drive - SCANIA 0XAT9033 1. Size(A x B): 29mm x 37mm 2. Application: Scania Trucks

326

60 mm

0XAT9201 1. Volvo rear axle e.g. FH, for removal and installation of leaf spring bolts on the springs. 2. Size: 3/4” Dr. SW=28.5mm, H= 60mm, Depth T= 22mm


TRUCK Wheel Shaft Cover Socket 115mm - Volvo 0XAT9005 1. For Volvo front /rear wheel axle cover 2. Hardened & tempered drop-forged Chrome-Molybdenum Steel 3. Use with air tool, 3/4" drive, 8-Sided 4. Applications: Volvo

Transmission Clutch Front Main Shaft Socket 3/4" Drive - SCANIA 0XAT9032 1. Size(A x B x C): Ø80.8mm x 72.5mm x 6.75mm 2. Application: Scania Trucks

Volvo FM12 King Pin Upper Cover Socket 0XAT9202 - To remove king pin upper cover. Size: 3/4 Dr, 6 Points, 80mm - Applicable: VOLVO FM12

Volvo FH Rear Axle Nut Socket 0XAT9203 - Fix bearing while removing or installing the truck nut. - Size: 1” Dr x 95mm x 6PT

SAF Axle Nut Socket, 140mm 0XAT9001 - Positive drive of the axle nut - Can be used with an impact wrench or torque wrench 1. ldeal suited for brake restoration working 2. Hardened & tempered drop-forged alloy steel 3. Used with 32/46mm socket 4. Application: SAF Euro axle

Roller Bearing Axle Nut Socket 12 Ton - BPW Axles-80mm 0XAT9004 1. This tool is designed to remove the nut, replace the new bearing with adjustmentable torque wrench Roller Bearing axle nut socket to suit BPW axles 2. Inner Diameter: 73mm Cutout: 80 x 49.5mm 3/4" drive 3. Applications: BPW axles, 12 ton

327


TRUCK MAN- Steering Mechanism Oil Seal Socket 0XAT9007 1. To loosetighten the nut, before/ after replaces steering mechanism oil seal 2. Size : PCD 58mm x 3/4"DR x 4 Points 3. Applications: MAN Tractor Trailer FE410A

IVECO Axle Nut Socket - 110mm 0XAT9008 1. Suited to male nut in the axle 2. Use with impact wrench or torque wrench 3. Size: 110mm Bi-Hex, 36mm hex drive 4. Application: Iveco Eurotech Cursor HA, etc.

IVECO Axle Nut Socket - 98mm 0XAT9009 1. Suited to male nut in the axle 2. Use with impact wrench or torque wrench 3. Size: 98mm Hex, 36mm hex drive 4. Application: Iveco Eurotech Cursor HA, etc.

Axle Nut Socket 95mm - Mercedes 0XAT9010 1. Suited to male nut in axle 2. Use with impact wrench or torque wrench 3. Size: 95mm Hex, 36mm hex drive 4. Application: Mercedes Benz Axle Trailers

Rear Axle Nut Socket 105/125mm - Mercedes 0XAT9011 1. Rigid Locating tube 2. High accuracy of fit 3. Extremely robust execution 4. Suitable for high tightening and loosening torque 5. Application: Mercedes Benz Actros Rear axle, HL/HL 8 (Hypoid), etc.

Front Axle Nut Socket 133/145mm - MAN TAG 0XAT9012 1. Six sided drive 60mm 2. Optional with sleeve Locating tube 3. High accuracy of fit, extremely robust execution 4. Suitable for high tightening and loosening torque 5. Application: MAN TGA Front axle, V9-82L-01 (Disk brake/ABS)

328


TRUCK Axle Nut Socket 133/145mm - MAN TGA 0XAT9013 1. Six sided drive 60mm 2. Optional with sleeve Locating tube 3. High accuracy of fit, extremely robust execution 4. Suitable for high tightening and loosening torque 5. Application: MAN TGA 460 drive axle, V9-82L-01(Disk brake/ABS)

Front Axle Nut Socket 101/110mm - MAN TGA 0XAT9014 1. Six sided drive 60mm 2. Optional with sleeve Locating tube 3. High accuracy of fit, extremely robust execution 4. Suitable for high tightening and loosening torque 5. Application: MAN TGA Front axle, V9-82L-01 (Disk brake/ABS)

Roller Bearing Axle Nut Socket, 6.5 - 9 Ton- BPW 65mm 0XAT9027 1. For dismantling and assembly of BPW axle nuts 2. Extremely versatile 3. Flat oval form 4. Suitable for exact torque with 3/4" square drive Inner Diameter: 61mm Cutout: 65 x 40mm 5. For machinery usage 6. Application: BPW 6.5 tons~9 tons trucks

Rear Axle Damper Rod Socket - 3/4" Drive - SCANIA 0XAT9034 1. Size(A x B): 34mm x 46mm 2. Application: Scania Trucks

Axle Nut Socket 3/4" Drive 56mm - BENZ/MAN Trucks 0XAT9035 1. Application: DAF, MAN trucks (with clamping nut 81.92901-0066); BENZ trucks 363,385,387,389,391,393,395, 617,620, 621,622,623,625 and 649; BENZ buses 0303,0305G and 0307; KASSBOHRER/SETRA S210, 215, SG 219-221, (non-driven rear axle types S216 HDS and S228 DT) 2. Size: 3/4" Drive x 56mm x 71mm

329


TRUCK Axle Nut Socket 3/4" Drive 60mm - BENZ/MAN Trucks 0XAT9036 1. Application: DAF, KASSBOHERE/SETRA BENZ and MAN 9 tons strengthen front axle Vl5 BENZ SK front axle VL5/1 D-9, VL5/2 D-9, series 2629/6x4, 2635 k/6x4, 3535 K8/x4/4, such as BENZ Actros with disc brake and FAUST 9 tons front axle 2. Size: 3/4" Drive x 60mm x 76mm

BENZ Groove Nut Socket For Rear Axle Nut 0XAT9003C • With hexagon drive SW 32. • For the dismantling and assembly of the rear axle nut. • High accuracy of fit. • Robust execution. • Suitable for high tightening and loosening torque. • Drive tube Ø 35 mm. • Application range: Mercedes Benz Citaro.

Groove Nut Socket For Differential Nuts 0XAT9003D • With hexagon drive SW 32. • Removal and installation of differential nuts. • High accuracy of fit. • Robust execution. • Suitable for high tightening and loosening torque. •Application range: Mercedes Benz Citaro,Evo Bus ( ZF axle 132 )

BPW Brake Linkage Adjuster Extractor 0XAT9009G • Substantial construction for drawing off firmly sitting BPW brake linkage adjusters. • Suitable for older and automatic linkage adjusters. • Special steel.

BPW Axle Extractor,136mm 0XAT9029-02 •Use this axle with spanner spin the screw. •Extremely robust execution. •Flat oval form. •European truck repair tool. •Special steel. •Application range : BPW ECO Plus 8~12 tons , BPW ECO 10 tons new model.

330


TRUCK Rear Axle Nut Socket 80/95mm - BENZ/MAN 0XAT9037 1. Application: Mercedes Benz Atego Rear axle, Vitaro 814, MAN, etc 2. Size(AxBxCxDxE): 80 x 95 x 49 x 87 x 10mm

MAN&BENZ Drive Axle Nut Socket 0XAT9039 1. Remove the drive axle nut 2. 3/4" Drive 3. Application: MAN, Benz truck 4. Size(AxBxC): 110 x 101.5 x 11.5mm

HALDEX Brake Linkage Adjuster Extractor 0XAT9042 1. Substantial construction for drawing off firmly sitting BPW brake linkage adjusters 2. Certain stop through ring shaped bearing area 3. Size(AxBxCxD): 65 x 160 x 78 x 127mm

Wheel Capsule And Axle Nut Socket 1. Clean ,easy loosening and tightening of flat oval wheel capsules and axle nuts, e.g. on BPW axles 2. Dismantling and assembly of grease capsule on BPW axles 3. 3/4" Drive Item No.

0XAT9043 0XAT9044 0XAT9045 0XAT9046 0XAT9047 0XAT9048

Size (AxBxC) 65 x 40 x 60mm 80 x 50 x 72mm 85 x 50 x 80mm 95 x 40 x 90mm 111 x 45 x 107mm 120 x 48.5 x 115mm

Axle Bearing Extractor - MAN Truck 0XAT9018 1. Replace MAN truck hub bearing and remove the old bearings essential tool 2. Turn the screw to remove bearing 3. Use with 30mm socket or spanner 4. Applications: MAN Truck

331


TRUCK MAN Tractor Axle Bearing Extrator 0XAT9019 1. Replace MAN truck tractor hub bearings and remove the old bearings 2. Remove the bearing by turning screw 3. Use with 30mm socket or spanner 4. Application: MAN truck tractor 33460 with front disc brake bearing

BPW Axle Extractor 8 - 12 Ton 0XAT9029 1. 0XAT9029-01 Specifiction: M135 x P2.0 Screw specification: Ø30 x 6W Application: BPW ECO 10-12 ton old model 2. 0XAT9029-02 Specifiction: M136 x P2.5 Screw specification: Ø30 x 6W 3. Application: BPW ECO 8-12 ton new model

BPW Axle Extractor 16 Ton 0XAT9030 1. Use with spanner spin the screw 2. Extremely robust execution 3. Application: 16 ton truck 4. Specifiction: M155 x P3.0 5. Screw specification: Ø30 x 6W

BPW Axle Extractor 12 Ton 0XAT9031 1. Use with spanner spin the screw 2. Extremely robust execution 3. Application: former 12 tons trailer 4. Specifiction: M125 x P2.0 5. Screw specification: Ø30 x 6W

Rear Axle Nut Soc ket 95/115mm - BENZ/MAN 0XAT9038 1. Application: Mercedes Benz und MAN 10+13t Reduction axle, Hypoid-and Trailer axle NR7/4, Omnibus 0305 G + 0405G 2. Size(AxBxCxD): 95 x 115 x 49 x 101 x 11.5mm

Truck Universal Extractor 0XAT9057 Easy for dismantling Japanese trucks front and rear axle with spanner spin the screw for removal. 1. Specification : Ø259 X 32MM 2. Screw Specification : Ø30 x 6w 3. Application: Japan truck only, ex: HINO, UD truck 180 pulley

332


TRUCK Transmission Socket 53.5mm - MAN Truck 0XAT9017 1. Use to removal/install the transmission nut on MAN truck 2. Sizes: 3/4"Dr. Inner Ø53.5mm x H 5mm; Outer Ø72mm 3. Applications: MAN Truck

3L Axle Oil Drain Pan - For Trucks & Trailers 0XAT9082 1. Comes in black color only. 2. Fits rims with 13-3/4" I. D. and larger. 3. Made of Polypropylene. 4. Capacity: 3L (107oz)

Axle Oil Drain Pan 0XAT9082A 1. Easy seat on wheel frame for draining axle oil when repairing. 2. Special designed balance bolts to adjust it for the best position on wheel frame. 3. Optional extra 2 bolt boxes 4. Optional 2 strong magnets on bottom to help stand on wheel frame 5. Capacity: 2.2L

Front Hub Nut Socket - 3/4" Drive 80mm - Scania 0XAT9002 1. This eight sided 80mm socket is specifically for front wheel nut sockets on Scania trucks 2. Use with 41mm Hex socket or spanner 3. Includes: Eight sided Specifically for front wheel nut sockets Robust quality 4. Application: SCANIA

Rear Hub Nut Socket - 3/4" Drive 100mm - Scania 0XAT9003A 1. A robust quality 100mm socket in 3/4" drive, eight sided 2. Specifically for removing the rear hub nuts 3. Suitable for Scania HGV's 4. Application: SCANIA

Front Wheel Hub Extactor - MAN Truck 0XAT9015 1. Remove the front wheel hub 2. Use with spanner spin the screw 3. Extremely robust execution 4. Specification: M115 x P1.5 5. Application: MAN Truck

333


TRUCK Front Wheel Hub Extactor - MAN Truck 0XAT9016 1. Install the front wheel hub 2. Use with spanner spin the screw 3. Extremely robust execution 4. Application: MAN Truck

MAN Front Wheel Hub Remover 166mm 0XAT9020 1. When MAN axle bearing got stuck due to over heat, use this tool with air wrench for labor saver and easier removal 2. Use with 55mm socket or spanner 3. P.C.D. - Ø166 mm 4. Application: MAN truck

BPW Rear Hubcap Nut Socket 1. Special heavy duty eight point socket to suit BPW rear axle hub retaining cap nuts fount on later model Japanese commercial trucks 2. Use with 41mm Socket or spanner 3. Application: BPW former 16 tons Item No

Applicable

0XAT9024 16 Ton 0XAT9025 12 Ton 0XAT9026 12 Ton

Size 120mm, 8 point 4-3/8" (111mm) Across the flats 4-5/16" (109mm), 8 point

Commercial Vehicle Ball Joint Remover 39mm 0XAT4103 1. Commercial Ball Joint Remover is useful on most trucks including Mercedes-Benz, Man etc. 2. Maximum capacity of 39mm. 3. Screw depth of 120mm. 4. Nut width: 26mm 5. Invaluable for removing the ball joints on track rod ends, steering knuckles etc.

Truck Ball-Joint Separator Designed to remove the truck ball joint

334


TRUCK Universal Truck Ball-Joint Extractor 0XAT9073 1. With three interchangeable forcing forks for universal application to eccentric rods and tie rods on nearly all makes of vehicles 2. Opening C : 25 - 32 - 47 mm 3. Applications: DAF, Iveco, MAN, Mercedes, Skania, Volvo, etc.

Truck Brake Spring Plier 0XAT2044 1. Remove and install the brake shoe return springs 2. Use on medium-duty and heavy-duty drum brakes

BPW Brake Linkage Adjuster Extractor 0XAT9028 1. BPW Brake Linkage Adjuster Extractor 2. Substantial construction for drawing off firmly sitting BPW brake linkage adjusters 3. Suitable for older and automatic linkage adjusters 4. Application: BPW truck 5. Sizes (A/B/C/D): 65/160/78/127mm

Knorr-Bremse Disc Brake Calliper Adjustment Socket 0XAT9059 - For use with the service kit for the Knorr-Bremse disc brake units for correct caliper adjustment. - For SN6, SN7, SK7, ADDB22X series of brakes found on the majority of european truck: Scania, Volvo, etc. - Five tooth spline. Hex Drive: 24mm. Length:1.13/16"(46mm)

Quick Tire Demounting Tool 0XAT6213 - Quick demount 20 - 22.5 - 24.5 inch rims - ube-type or tubeless style, and up to a 13-inches wide wheel

HD Tire Mounting Bar 0XAT6217 - Rigid alloy truck tire mounting bar made from SAE6140 - Provides excellent wheel/rim surface contact area for less side to side movement. Supporting tip to help griping rim easily as leverage center. - Sizes: 0XAT6217A = ø 3/4” (19mm) x 37” (940mm) L 0XAT6217B = ø 7/8” (22mm) x 40” (1020mm) L

335


TRUCK Extended Bar HGV Wheel Nut Wrench - ø25.4mm Dr. Hole 0XAT9100 1. Special design for HGV Wheel Nut removal 2. Extended bar with 2 sizes socket on 2 side 3. Material are SAE 6140 for the extended bar sockets 4. Drive handle: ø25.4 x 600 mm L, SAE 1045 Sizes: 0XAT9100A – 25.4mmø with 21mm X 41mm X 400mm L 0XAT9100B – 25.4mmø with 21mm X 38mm X 400mm L 0XAT9100C – 25.4mmø with 26mm X 33mm X 400mm L 0XAT9100D – Handle 25.4mmø X 600mm L 0XAT9100E – 25.4mmø with 17mm X 32mm X 400mm L 0XAT9100F – 25.4mmø with 17mm X 35mm X 400mm L 0XAT9100G – 25.4mmø with 17mm X 33mm X 400mm L 0XAT9100H – 25.4mmø with 19mm X 41mm X 400mm L 0XAT9100I – 25.4mmø with 20mm X 38mm X 400mm L

HGV Wheel Nut Extended Bar Wrench - ø19mm Dr. Hole 0XAT9101 1. Special design for HGV Wheel Nut removal 2. Extended bar with 2 sizes socket on 2 side 3. Material are SAE 6140 for the extended bar sockets 4. Drive handle: ø19 x 630 mm L, SAE 1045 Sizes: 0XAT9101A – 7/8"ø with 24mm X 27mm X 400mm L 0XAT9101B – 25.4mmø with 30mm X 32mm X 400mm L 0XAT9101C – 25.4mmø with 32mm X 33mm X 400mm L 0XAT9101D – Handle -19mmøX 630mm L 0XAT9101E – 25.4mmø with 27mm X 30mm X 400mm L 0XAT9101F – 25.4mmø with 27mm X 32mm X 400mm L 0XAT9101G – 25.4mmø with 30mm X 33mm X 400mm L 0XAT9101H – 25.4mmø with 28mm X 33mm X 400mm L 0XAT9101I – 25.4mmø with 27mm X 33mm X 400mm L 0XAT9101J – 25.4mmø with 24mm X 38mm X 400mm L 0XAT9101K – 25.4mmø with 3/4" X 32mm X 400mm L

Truck Injectors Solution 0XAT9086 •Injector puller solution SSANGYONG & MERCEDES 【Special for trucks】 •Special injector puller solution for new generation trucks •Application range: SSANGYONG, MERCEDES, Trucks with Injector-Pump systems or with traditional truck injectors (VOLVO, SCANIA, MERCEDES, MAN, RENAULT, IVECO, etc.)

Truck Valve Remover / Installe 0XAT9087 - To remove and install the valve of truck. - Japan Truck Repair Tool. - Special Steel. - Application range: FUSO 3.5 tons, FUSO over 15 tons, HINO 750, ISUZU 180, ISUZU 200

336


TRUCK 1”Sq. Dr. Hexagon Torque Impact Socket - extra deep 0XAT6061

A

D1 mm 49

B

46.5

54

28

16

305

1-1/4”

340

C

54

54

28

22

305

33mm

600 650

Item

D2 mm 54

L2 mm 28

d mm 23

L mm 305

size 13/16”

TORQUE N.m 650

D

54

54

28

23

305

1-5/16”

E

48

54

28

19

305

30mm

450

F

58

54

28

23

305

1-1/2”

650

1”Sq. Dr. Hexagon Torque Impact Socket - extra deep 0XAT6061

A

D1 mm 49.2

B

46.7

42

30

18

305

1-1/4”

340

C

54

42

30

23

305

1-5/16”

650

D

58

42

30

22

305

1-1/2”

650

Item

D2 mm 42

L2 mm 30

d mm 23

L mm 305

size 13/16”

TORQUE N.m 650

Sleeve Locating Tube, 60-67mm 0XAT9088A •Practical connector system with fixing screw. •Usably for different groove socket nuts(module systems). •Enables stable work position. •prevents slippage of the socket. •Extremely robust execution. •Change through loosening of the grub screw on the hexagon. •Special steel.

Sleeve Locating Tube, 54-60mm 0XAT9088B •Practical connector system with fixing screw. •Usably for different groove socket nuts(module systems). •Enables stable work position. •prevents slippage of the socket. •Extremely robust execution. •Change through loosening of the grub screw on the hexagon. •Special steel.

Rear Hub Nut Socket 3/4" Drive 100mm - Scania 0XAT9003 •Control the nut with slide rod to adjust bearing. •This eight sided 100mm socket is specifically for rear wheel nut sockets on Scania trucks.

337


TRUCK VOLVO Wheel Shaft Cover Socket (8 Points,115mm,Dr.1") 0XAT9005A - For Dismantling The Front / real Wheel Axle Cover Of VOLVO . - Size: Dr.1”,(115mm) 8 Point opening - Oval Shaped - Application range: VOLVO TRUCK

Volvo Front Wheel Shock Absorb Spring Washer Removal 0XAT9006A - With 6 point drive SW 27 - Suitable for exact torque - With 2 external studs Ø 8.7 mm - Extremely versatile - For machinery usage - Special steel - Application range: VOLVO e.g. FL6 / F10 / F12

Extension Tube for MAN TGA Rear Axle 0XAT9094 - For the removal and installation of wheel hubs. - Extension tube for the protection of the wheel bearing and threaded bolts. - With knurling and bore for toggle lever. - Application range: MAN TGA rear axle e.g. HY 1350 - Product specifications are as follows: ITEM SF-9005L

Thread M100x1.5

inner Ø 96 mm

outer Ø 104.6 mm

L 360 mm

Oil Filter Wrench for MAN (135mm, 18POINTS , Dr.1/2”) 0XAT9095 Application range: MAN 18~48 tons truck. Series F2000 , FE and TGA engine (406 , 410 , 414 , 440 , 460)

Universal Wheel HUB Extractor 0XAT9070 - Universal wheel HUB extractor. - Variable for bolt diameter up to 300mm. - Universal for bolts up to max ∮22mm - Application range: General Truck Repair Tool Thread Adaptor Specification ITEM NO. M18 X P1.5 X 65mm/ L X 2PCS 0XAT9070-1 M20 X P1.5 X 65mm/ L X 2PCS 0XAT9070-2 M22 X P1.5 X 65mm/ L X 2PCS 0XAT9070-3 M24 X P1.5 X 65mm/ L X 2PCS 0XAT9070-4 M30 X P1.5 X 65mm/ L X 2PCS 0XAT9070-5 Pressure Plate ITEM NO. 0XAT9070-6 ∮95mm / 65mm X 30mm/H – Small X 1PC 0XAT9070-7 ∮110mm / 85mm X 30mm/H – Large X 1PC

338


GENERAL TOOLS Mini Hook & Pick Set 0XAT5002 Contents:Straight, Right Angle, Half-round, Swan Neck; Suitable for removal of bushings, cotter pins.

Radiator Hose Remover Tool 0XAT5003 1. Chrome-vanadium steel shaft with chrome-plated. 2. Suit for pin/clip picking, hose removal. 3. 0XAT5003-1 Overall length:220mm 0XAT5003-2 Overall length:280mm

Mini Hook & Pick Set 4pc 0XAT5006 1. Chrome ďŹ nish shafts with knurling for ďŹ ngertip precision 2. Ergonomically styled handles for comfort, grip and accuracy 3. Suitable for removal of bushings, cotter pins, O-rings and seals 4. Contents (165mmL): Straight, Right Angle, Half-round, Swan Neck

Mini Hook & Pick Set 4pcs 0XAT5006A 1. Contents (165mmL): Straight, Right Angle, Half-round, Swan Neck. 2. Suitable for removal of bushings, cotter pins. 3. O-rings and seals.

Pick & Hook Set 4pc Extra-Long 0XAT5017 1. Chrome Vanadium steel extra-long shafts with comfort grip handle 2. Applications: Removal of hose clips, hoses, O-rings and seals 3. Overall length: 380mm

Curved Rubber Hook Tool 0XAT5028 1. Hardened and tempered Chrome Vanadium steel shaft 2. Features textured comfort grip handle 3. Curved head for smooth operation in both directions 4. Suitable for windscreen replacement applications 5. 0XAT5028-01 Length: 190mm 0XAT5028-02 Length: 260mm

339


GENERAL TOOLS Heavy-Duty Picks, Hooks & Scrapers Set 9pc 0XAT8045 1. Suitable for pin/clip picking, hose removal and gasket scraping. 2. Ergonomically styled handles for comfort, grip and accuracy. 3. Contents: - Picks 165 & 260mm - Straight, Right Angle, Half Round, Swan Neck, - Scraper 260 x 25mm

5 Pieces Picks & Hooks Set 0XAT8046 1. Angle Prybar Heavy Duty 4pcs (Made in Taiwan) 2. Material: chrome-vanadium steel 3. Five-piece set includes an aluminum handle knurled for a sure grip. 4. It also includes four pieces hardened & tempered. 5. high carbon steel picks: O-ring, 90 degree straight and hook. 6. Used picks to pull "O"-rings, seals, cotter pins and brushes more quickly and easily.

Twist Socket Set 10pc 0XAT8048 - Release and unscrew tight nuts and bolts with damaged threads or rounded heads. - Special left handed thread, 6 conical reducing cutting edges. - Extra ďŹ&#x201A;at and compact design. - Drive with either socket, ring or open-ended spanners. - Sizes:M8,M10,M11,M12,M13,M14,M15,M16,M17&M19.

Hex Twist Socket Set 13pcs 0XAT8050 1. 3/8"DR. 8, 10, 11, 12, 13, 14 2. 1/2"DR. 16, 17, 18, 19, 21 3. 74mmL Steel Bar and 80mmL Steel Bar

Twist Socket Set 1/2"Dr. 14PCS Set 0XAT8058 1. For removing rusty, stripped or worn nuts. 2. Not for installing new nuts. 3. Designed to be used with a ratchet wrench. Not for use with an air or impact wrench. 4. Punch bar used with a hammer for removing the nuts stuck in the twist sockets. 5. Application: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm, 24mm, 27mm

340


GENERAL TOOLS 7pcs Picks/Hooks & Screwdriver Set 0XAT8088 1. Comfortable handle with quick chuck for sure grip and quick to change the blade. 2. It includes 2pcs of double-end screwdriver 4pcs high carbon steel picks:O-ring,90° straight and hook. 3. Used picks to pull "O"-rings,seals,cotter pins and brushes more quickly and easily.

Locking Wheel Nut Remover Set ½”Drive 5pc 0XAT8060 1. Forged Chrome Molybdenum steel, for removal of wheel locking nuts when the key is not available 2. Be used on fixings to damaged or corroded for standard sockets 3. Suitable for use with impact wrenches 4. Sockets: 17/19/21/22mm 5. DriftZ: Ø12 x 80mm

Twist Extr actor Deep Socket Set 5pc 1/2"Drive 0XAT8062 1. Drop-forged Chrome Molybdenum steel extractor sockets 2. Reverse spiral flutes are designed to bite down to provide maximum gripping power 3. Set supplied with 12mm straight drift to knock bolt out after use 4. Contents: Sockets/150mm: 17/19/21/22mm 5. Drift: 12 x 150mm

Locking Lug Nut Socket Set 9pcs 0XAT8067 1. Hardened & tempered Chrome-Molybdenum sockets with balck finish. 2. Tapered swirl design to easily remove damaged lug nut sockets 3/8" Sq. Drive, Metric size. 3. Contents: 8mm,10mm,11mm,12mm,13mm,14mm, 16mm,17mm and 19mm

Twist Extractor Socket Set 4pc 1/2"Drive 0XAT8070 1. Drop-forged Chrome Molybdenum steel extractor sockets 2. Reverse spiral flutes are designed to bite down to provide maximum gripping power 3. Suitable for use with impact tools 4. Sockets-17/19/21mm 5. Extension Bar-75mm

341


GENERAL TOOLS Hydraulic Nut Splitter Set 5pcs 0XAT8071 1 .Hardened & tempered forged chrome vanadium body. 2. Powered by a 10ton hydraulic ram. 3. Set includes five nut splitters. 4. Ring diameter:14,19,32,39 & 48mm

17PC, Puller Wrench & Extractor Set 0XAT8258 1. 8x 3/8"Dr. x 9-10-11-12-13-14-16-19mm Zigzag sockets, CR-MO steel, Satin chrome plated: 2. 4x 1/2"Dr. x 6-8-10-12mm ( Stud puller wrenches, CR-MO steel inside & CR-V steel outside, chrome plated) 3. 5x Screw extracto M3~M6, M6~M8, M8~M11, M11~M14, M14~M18

Screw Extractor Drill & Guide Set 0XAT8006 1. For Extracting Broken Screws, Studs & Bolts: 5mm to 16mm 2. Threads Designed to remove broken fasteners without breaking or jamming

Bolt Extractor Set 5pc 1/2" Drive, Metric 0XAT8052 1. Drop-forged Chrome Molybdenum steel sockets 2. Reverse spiral flutes are designed to bite down to provide maximum gripping power 3. Supplied with 8mm drift to knock bolt out after use 4. Sizes: 21mm/22mm/24mm/25mm

Bolt Extractor Set 10pc 3/8"Drive 0XAT8066 1. Drop-forged Chrome Molybdenum steel sockets 2. Reverse spiral flutes are designed to bite down to provide maximum gripping power 3. Supplied with 8mm drift to knock bolt out after use 4. Bolt Extractor Set 10pc 3/8"Drive 5. Contents: Sockets; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 19mm, 74mm; Straight Rod

Stud Remover Set 5pc 0XAT8093 1. 4 x stud extractors and a Go-thru' ratchet spanner 2. Short, for tight restricted areas 3. Sizes: 6, 8, 10, 12 Sockets plus 14mm & 17mm Go-thru' Ratchet

342


GENERAL TOOLS Stud Extractors 1/2" Drive 0XAT8112 1. Impact stud extractor, fully adjustable and can be used with air tools or standard hand tools on studs 2. Will effectively work on threaded, broken, rusted, stripped or smooth studs 3. 0XAT8112-01 : 1/2"DR. Capacity: 6-12mm 0XAT8112-02 : 1/2"DR. Capacity: 12-19mm 0XAT8112-03 : 1/2"DR. Capacity: 19-24mm

Stud Removal & Insert Set 8pc 0XAT8133 1. Uniquely designed tool for the removal and installation of studs without damaging the threads 2. Each thread size uses one tool for removal and one for installation 3. Contents: M6 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5mm

Stud Extractor 1/2" Drive 0XAT8142 1. Provides powerful grip by use of an eccentric knurled wheel 2. Ideal for removing stubborn or rusted studs 3. Robust tool 4. Capacity: 10-19mm (3/8"-3/4")

Stud Extractor Set Short Series 4pc 0XAT8194 1. Short size allows access to awarkward areas 2. Concentric roller action 3. Left handed thread - Reverse off action 4. Contents: 3/8" Drive - 6, 8mm and 1/2" Drive - 10, 12mm

Stud Extractor ½" Drive Set 4pc 0XAT8195 1. Socket type extractors manufactured from Chrome 2. Vanadium steel heat treated and chrome plated for corrosion resistance 3. Use with 1/2" drive ratchet or spanner 4. Contents: 6, 8, 10, 12mm

Bolt Extractor Kit 3/8" Drive 6pc 0XAT8237 1. This precision kit allows the user to extract bolts which are corroded, augmented and need to be removed without damaging the casing or thread from which the bolt was placed into 2. Manufactured from CR-MO hardened steel for maximum durability 3. Sizes: 2, 3, 4, 6, 8, 10mm

343


GENERAL TOOLS Bolt Extractor Kit 3/8" Drive 5pc 0XAT8238 1. This precision kit allows the user to extract bolts which are corroded, augmented and need to be removed without damaging the casing or thread from which the bolt was placed into 2. Manufactured from CR-MO hardened steel for maximum durability 3. Bolt Extractor Kit 3/8" Drive 5pc 4. Sizes: 8, 10, 12, 14, 16mm

Screw Extractor Set 15pc 0XAT8246 1. Provides an efficient method for extracting broken machine screws, studs, cap screws and other types of threaded fasteners that have been partially destroyed preventing their normal removal 2. Extracts damaged threads from 6mm-14mm 3. Contents: 12mm Hex - 3/4/5/5.5/6/8/10mm & 3/8", 1/8", 3/16", 1/4" 16mm Hex - 11/12/14mm & 1/2"

Nut/Bolt Removal Kit 7pc 0XAT8247 1. For quick & simple removal of damaged nuts and bolts 2. The robust high carbon steel shank will withstand twisting and torsion shear. 3. The reverse spiral flutes hold onto the most damaged and difficult fastener heads 4. Can be used with power drills and impact wrenches 5. Sizes (1/4" Shank): 6/8/10/11/12/13/ 14mm x 65mm long

Hydraulic Nut Splitter - 22mm 0XAT8031 1. Splits rusted hex nuts up to 7/8" (22mm) across the flats 2. Does not damage the bolt threads 3. Blade is replaceable 4. 4" (100mm) long

Nut Splitter Set 4pc 0XAT8035 1. Chrome Molybdenum steel blades with forged high carbon steel grips 2. Hardened, tempered and chrome plated for rust resistance 3. Chrome Molybdenum steel blades, forged high carbon steel body 4. Capacity: 9-12mm, 12-16mm, 16-22mm, 22-27mm

Hydraulic Nut Splitter – 33mm 0XAT8037 1. Splits rusted hex nuts up to 33mm across the flats 2. Does not damage the bolt threads 3. Blade is replaceable 4. Capacity: 33mm

344


GENERAL TOOLS Heavy-Duty Nut Splitter 19mm 0XAT8039 1. Splits frozen nuts from 7/16" (11mm) to 3/4" (19mm) 2. Wobble tip inside cutting enclosure automatically keeps the nut centered 3. Constructed of drop-forged steel and plated to resist corrosion 4. Chisel is heat treated 5. Capacity: 11-19mm (7/16"-3/4")

Hydraulic Nut Splitter Kit 2pc - 22 / 33mm 0XAT8215 1. Includes 2 grease ram hydraulic nut splitters that will split sized hex nuts from the smallest size up to 1.1/2" (36mm) across the flats without damage to bolt or stud thread 2. Hydraulic Nut Splitter – 33mm 3. Capacity: 22 & 33mm

1/2"Drive Impact Socket -1-1/2" Deep 0XAT4163 1. Forged and heat treated chrome vanadium steel impact grade sockets. 2. Chemically blackened for corrosion resistance. 3. Suitable for use with either hand ratchet wrenches or air impact wrenches. 4. Applications:Ball Joints & Flywheel Nuts-Rover Group, Austin Mini, 1100/1300, Allegro, Maxi.

1/2"Drive Impact Socket -1-13/16" Deep 0XAT4164 1. Forged and heat treated chrome vanadium steel impact grade sockets. 2. Chemically blackened for corrosion resistance. 3. Suitable for use with either hand ratchet wrenches or air impact wrenches. 4. Applications:Ball Joints-Austin Metro.

½" Drive Deep Impact Socket 30mm 0XAT4165 1. Fits Hub Nuts on most popular vehicles 2. Impact Quality 3. Applications: Hub Nuts - Audi, Citroen, Fiat, Ford Fiesta/Escort, Lada Samara, Opel,Peugeot, Renault, Vauxhall, VW

½" Drive Deep Impact Socket 32mm 0XAT4166 1. Fits Hub Nuts on most popular vehicles 2. Impact Quality 3. Applications: Hub Nuts - Audi, Citroen, Fiat, Ford, Lancia, Maestro/Montego, Mazda, Peugeot, Renault, Talbot CV Wheel Nuts; Mercedes 7.5T up Drive Shaft; Rover 200 & 400

345


GENERAL TOOLS ½" Drive Deep Impact Socket 35mm 0XAT4167 1. Fits Hub Nuts on most popular vehicles 2. Impact Quality 3. Applications: Hub Nuts - Citroen BX, Peugeot J7 & J9, Rover

½" Drive Deep Impact Socket 36mm Bi-Hex 0XAT4168 1. Fits Hub Nuts on most popular vehicles 2. Impact Quality 3. Applications: Hub Nuts - Alfa,Citroen, Fiat, Lancia, Peugeot, Volvo, VW 4. Clutch: Vauxhal/Opel; ABS Brakes; Saab Gearbox; Assorted

½" Drive Deep Impact Socket 41mm 0XAT4169 1. Fits Hub Nuts on most popular vehicles 2. Impact Quality 3. Applications:Hub Nuts - Alfa, Citroen, Fiat, Ford Sierra / Sapphire

½" Drive Impact Socket 1-5/16" 0XAT4170 1. Fits Hub Nuts on most popular vehicles 2. Impact Quality 3. Applications: Hub Nuts - Rover Mini, Austin Allegro, 1100/1300,  Maxi Steering Column Nuts; Rover Mini

½" Drive Impact Socket 40mm 0XAT4171 1. Fits Hub Nuts on most popular vehicles 2. Impact Quality 3. Applications: Hub Nuts - Peugeot, Maestro, Montego

½" Drive Impact Socket 52mm 0XAT4172 1. Fits Hub Nuts on most popular vehicles 2. Impact Quality 3. Applications: Hub Nuts - Range Rover and Land Rover

3/4" Drive Impact Socket 45mm 0XAT4173 1. Fits Hub Nuts on most popular vehicles 2. Impact Quality 3. Applications: Hub Nuts - BMW 5 Series

346


GENERAL TOOLS 3/4" Drive Impact Socket 46mm 0XAT4174 1. Fits Hub Nuts on most popular vehicles 2. Impact Quality 3. Applications: Hub Nuts; BMW 3 Series

3/4" Drive Socket 50mm Bi-Hex 0XAT4175 1. Fits Hub Nuts on most popular vehicles 2. Introduced specifically for the hub nuts on Transit vans 3. Applications: Hub Nuts - Ford Transit 80, 100, 115, 120, Dec 1988 on

3/4" Drive Socket 65mm 0XAT4176 1. Fits Hub Nuts on most popular vehicles 2. Introduced specifically for the hub nuts on Transit vans 3. Applications: Hub Nuts - Ford Transit 130, 150, 190 up to 1993

3/4" Drive Deep Impact Socket 27mm 0XAT4177 1. Fits CV Wheel Nut on most popular vehicles 2. Impact Quality 3. Applications: CV Wheel Nuts; DAF, Fiat, Iveco, Renault, Volvo, VW

3/4" Drive Deep Impact Socket 28mm 0XAT4178 1. Fits CV Wheel Nut on most popular vehicles 2. Impact Quality 3. Applications: CV Wheel Nuts - ERF, Leyland

3/4" Drive Deep Impact Socket 30mm 0XAT4179 1. Fits CV Wheel Nut on most popular vehicles 2. Impact Quality 3. Applications: CV Wheel Nuts - Bedford, Scammell

3/4" Drive Deep Impact Socket 33mm 0XAT4180 1. Fits CV Wheel Nut on most popular vehicles 2. Impact Quality 3. Applications: CV Wheel Nuts - Bedford 3T, Leyland, Scammell, Volvo

3/4" Drive Socket 56mm Bi-Hex 0XAT4181 1. Fits Hub Nuts on most popular vehicles 2. Introduced specifically for the hub nuts on Transit vans 3. Applications: Hub Nuts - Ford Transit 130, 150, 190, 1993 on

347


GENERAL TOOLS Torque Multiplier 0XAT6005 1. The specification of the multiplier. 2. Torque Multiplier: Female 1/2"D x Male 3/4"D 3. Gear Ratio 3.3:1 4. Max. rated Input: 225ft/lb(330Nm) 5. Max. output: 750ft/lb(1000Nm) 6. Gear system: Planetary train type. 7. Length: 420mm 8. Head depth: 78mm 9. Head width: 70mm

Tire Pressure Monitoring System Torque Tool Kit 0XAT6006 Contents: 1 - 3/8" Drive Torque Wrench: 20 in-lb to 90 in-lb; 1 - Valve Core Tool; 2 - 3/8" Drive, 63mm long Socket: 11mm & 12mm

Dual Head Duriable Ratched Adaptor 0XSW3106 1. Converts standard handles to ratcheting handles 2. Combined driver input from square driver or spanner wrenches. 3. Applicable for breaker bars, T-bars, extension bars or spanner wrenches. 4. Three-position on control ring provides anticlockwise ratchet, clockwise ratchet and locking. Item No.

Size

A C Male Female

D

L

Gear

Torque DIN3122

0XSW3106A

1/4”

1/4”

1/4” 13mm 42mm 20T

62Nm

0XSW3106B

3/8”

3/8”

1/2” 22mm 55mm 24T

202Nm

0XSW3106C

1/2”

1/2”

1/2” 22mm 60mm 24T

512Nm

Durable Ratched Adaptor 3/4” – 3/4” 0XSW3109 1. Converts standard handles to ratcheting handles 2. 3/4” – 3/4” size with according DIN 3122 - Torque capability: 1412 Nm Min. - 24 Teeth 3. Applicable for breaker bars, T-bars, extension bars or wrenches. 4. Three-position on control ring provides anticlockwise ratchet, clockwise ratchet and locking.

Star E-Socket & Bit Set 42pc 0XAT8095 1. Contents : 10-Star E-Sockets; E4,E5,E6,E7,E8,E10,E11,E12, E14 & E16. 2. 40-25mmL Insert Bit. 1-Drive Handle. 3. 1-Extension Bar with quick-realease 130mmL

348


GENERAL TOOLS Torque Limited Tyre Valve Tool - 4lb.in/0.45Nm 0XAT6200 1. Specialist tool specifically designed to prevent over tightening of valves cores fitted to wheels/tyres with TPMS 2. Over-torquing can easily damage delicate pressure sensor packs, causing expensive repairs 3. Preset torque value 4. 0XAT6200-02: 160mm long 0XAT6200-01: 125mm long

18"Screwdriver Set 3pcs 0XAT8013 1. Hardened and tempered Chrome vanadium steel shafts with stain chrome finish. 2. Overall length:450mm/18" 3. Size:Slotted 8mm & 6mm Phillips#3

Screw Extractor Set 5pc 0XAT8137 1. Manufactured from heat treated Chrome Molybdenum steel 2. Rapid acting helix aids screw removal 3. Supplied in storage case 4. Contents: 1/8"-1/4", 1/4"-5/16", 5/16"-7/16", 7/16"-9/16", 9/16"-3/4"

Screw Extractor Set 5pc Square Type 0XAT8138 1. Manufactured from heat treated Chrome Molybdenum steel 2. Square section aids removal of extractor from screws 3. Contents: 1/8", 3/16", 15/64", 5/16", 3/8"

90 Degrees Deep Internal Circlip Pliers 0XAT2020 1. This design is ideal for removing and installing the snap rings when they are situated in a deep recess application. 2. Allows easy removal/installation of internal snap ring in hydraulic brake and clutch master cylinder, transmission gear locating, bearing retention and oil seal retention 3. Depth of Nose: 50mm 4. Tip Dia.: 1.5mm

Special Light Bulb Pliers 0XAT7011 1. Special pliers for installing/removing wedge base bulbs 2. Blades made of special steel with plastic protective caps, pliers with solid plastic body 3. Applications: VW Passat since 1996; Seat Leon bulb in ambient air switch on Opel Astra F,Mercedes-Benz and Renault passenger cars

349


GERNERAL TOOLS Welding Locking Grip Pliers - Angled Jaws 0XAT5185 1. Grips feature linear jaw action which applies pressure perpendicular to the workpiece for secure clamping 2. Compact size with push-button jaw release is ideal for working in confined spaces 3. Jaw Capacity: 0 ~ 18mm

Welding Locking Grip Pliers - Wide Curved Jaws 0XAT5186 1. Grips feature linear jaw action which applies pressure perpendicular to the workpiece for secure clamping 2. Compact size with push-button jaw release is ideal for working in confined spaces 3. Jaw Capacity: 0 ~ 15mm

Welding Locking Grip Pliers - Double Curved Jaws 0XAT5187 1. Grips feature linear jaw action which applies pressure perpendicular to the workpiece for secure clamping 2. Compact size with push-button jaw release is ideal for working in confined spaces 3. Jaw Capacity: 0 ~ 15mm

Welding Locking Grip Pliers - Wide Flat Jaws 0XAT5188 1. Grips feature linear jaw action which applies pressure perpendicular to the workpiece for secure clamping 2. Compact size with push-button jaw release is ideal for working in confined spaces 3. Jaw Capacity: 0 ~ 12mm

Welding Locking Grip Pliers - Straight Jaws 0XAT5189 1. Grips feature linear jaw action which applies pressure perpendicular to the workpiece for secure clamping 2. Compact size with push-button jaw release is ideal for working in confined spaces 3. Jaw Capacity: 0 ~ 16mm

Metal Sheet Locking Grip Pliers 0XAT5190 1. Wide jaw self gripping pliers, with flat jaws 2. Jaw Capacity: 0 ~ 30mm

350


GENERAL TOOLS Welding Vice Grip Pliers 0XAT5191 1. For clamp bands and profile section when welding 2. Jaw Capacity: 0 ~ 45mm

Locking C - Clamp with Swivel Pads 0XAT5192 1. Features swivel pads, knurled adjusting screw with level type release 2. 0XAT5192-01 Length: 170mm (6-1/2") 0XAT5192-02 Length: 175mm (10-1/2")

E-Ring Tool Kit 4pc 0XAT8175 1. Composite handle with interchangeable heads 2. Suitable for fast removal and installation of E-Rings without damage 3. Reversible blades hold E-Ring in place for easy installation 4. Sizes: 6mm, 7mm, 8mm, 9mm

Deep Reach Pliers 350mm 0XPR1001

Flat Nose

0XPR1002

Long Nose

0XPR1003

45º Bent Nose

1. Manufactured from drop-forged, hardened, tempered steel 2. Features double joints allowing work in narrow and deep  areas, while keeping handle spread to a minimum 3. Double dipped insulation gives additional comfort in use and foam finish provides a sure grip - even with greasy hands

Long Reach Pliers 280mm 0XPR1004

Straight Nose

0XPR1005

45º Bent Nose

0XPR1006

90º Bent Nose

1. Manufactured from drop-forged, hardened, tempered steel 2. Double dipped handle insulation gives additional comfort in use and foam finish provides a sure grip - even with greasy hands 3. Ideally suited to applications with limited access 4. Full length handle insulation

Pistol Grip Ring Nose Pliers 275mm 0XPR1010 1. Manufactured from drop-forged, hardened, tempered steel 2. Features 45° handle, ideal for applications where access is limited 3. Double dipped insulation gives additional comfort in use and foam finish provides a sure grip - even with greasy hands

351


GENERAL TOOLS Extra Long Pliers 400mm 0XPR1007

Flat Nose

0XPR1008

45º Bent Nose 90º Bent Nose

0XPR1009

1. Manufactured from drop-forged, hardened, tempered steel 2. Double dipped handle insulation gives additional comfort in use and foam finish provides a sure grip - even with greasy hands 3. Ideally suited to applications with limited access

Professional Pliers Set 3pc 0XPR1020 1. Manufactured from drop-forged, hardened, tempered steel 2. Double dipped handle insulation gives additional comfort in use and foam finish provides a sure grip - even with greasy hands 3. Secondary jaw faces give a wider variety of gripping options 4. Contents: Long Nose Pliers 165mm Side Cutters 165mm Combination Pliers 185mm

Mini Pliers Set 5pc 0XPR1040 1. Manufactured from drop-forged, hardened, tempered steel 2. Fitted with spring-loaded handles 3. Suitable for engineering or modelling applications 4. Contents: Side Cutter 110mm Needle Nose 150mm End Cutter 105mm Snipe Nose 125mm Long Nose 125mm

Locking Pliers Set 3pc 0XPR2001 1. Hardened and tempered, drop-forged Chrome Vanadium steel jaws with combination profile for sheet or pipe. 2. Deep-cut jaw faces assist grip. 3. Knurled jaw adjustment screw and flip release mechanism. 4. Black phosphate finish for long term corrosion resistance. 5. Contents: 0XPR2001-01 : Length: 125mm; Capacity: 30mm 0XPR2001-02 : Length: 175mm; Capacity: 40mm 0XPR2002-03 : Length: 250mm; Capacity: 45mm

Curved Jaw Locking Pliers 0XPR2002 1. Particularly suitable for plumbing and heating pipework 2. 0XPR2002-01 Length: 165mm; Capacity: 0-42mm 0XPR2002-02 Length: 235mm; Capacity: 0-63mm 0XPR2002-03 Length: 300mm; Capacity: 0-70mm

352


GENERAL TOOLS Straight Jaw Locking Pliers 0XPR2003 1. General purpose pliers with reinforced teeth for a range of applications 2. 0XPR2003-01 Length: 190mm; Capacity: 0-42mm 0XPR2003-02 Length: 235mm; Capacity: 0-58mm

Long Nose Locking Pliers 0XPR2004 1. Particularly suitable for plumbing and heating pipework 2. 0XPR2002-01 Length: 165mm; Capacity: 0-42mm 0XPR2002-02 Length: 235mm; Capacity: 0-63mm 0XPR2002-03 Length: 300mm; Capacity: 0-70mm

Circlip Pliers Set Internal/External 0XPR3001 1. Hardened and tempered interchangeable steel jaws 2. Quick release mechanism allows six different internal/external applications 3. Contents: 180° x 2, 90°, 45° Interchangeable Jaws

Circlip Pliers Set 10pc Internal/External 0XPR3002 All circlip pliers feature reversible joints enabling use for either external or internal circlips 2. Includes two 125mm picks for hard to reach or dropped clips 3. Contents: 1.0x140mm Bent, 1.0x150mm Straight, 1.2x140mm Bent, 1.2x150mm Straight, 1.8x190mm Bent, 1.8x200mm Straight, 2.3x215mm Bent, 2.3x230mm Straight, 125mm Hook Tool & Pick Tool

Circlip Pliers Set Internal/External 265mm 0XPR3004 1. Internal and external circlip pliers with spring ratchet locking mechanism to securely hold against circlip tension 2. Includes eight sets of tips in two sizes at various angles 3. Maximum spread 50mm 4. Contents: 2pc Each - 2.75mm Tips x 0°, 15°, 45°, 90° 2pc Each - 3mm Tips x 0°, 15°, 45°, 90° Internal & External Circlip Pliers

Circlip Pliers Set Internal/External 400mm 0XPR3005 1. Internal and external pliers with spring rachet locking mechanism to securely hold against circlip tension 2. Includes eight sets of tips in two sizes at various angles 3. Maxium spread 50mm 4. Contents: 2pc Each-2.75mm Tips x 0°, 15°, 45°, 90° 2pc Each-3mm Tips x 0°, 15°, 45°, 90° Internal & External Circlip Pliers

353


GENERAL TOOLS Mini Circlip Pliers Set 4pc 0XPR3006 1. Internal and external pliers in straight and bent profiles 2. Manufactured from Chrome Molybdenum steel with spring loaded action and non-slip PVC grips 3. Tip diameter 1mm. Suitable for 10-20mm circlips 4. Contents: 70mm Bent/External ; 75mm Straight/ External 70mm Bent/ Internal ; 75mm Straight/ Internal

Body Complete Wuth Peg Set 0XPR3007 1. Contents: 1PC x Circlip Plier Body / 2PCS x 2.29mm Peges 2PCS x 3.00mm Peges / 2PCS x 3.81mm Peges 2PCS x 4.32mm Peges 2. O.D.: 5 mm

Circlip Pliers - Internal/External 0XPR3008 1. Manufactured from Chrome Molybdenum Steel 2. Precise screw action control 3. Interanl tip capacity: 15-49mm 4. External tip capacity; 9-45mm 5. Contoured soft grip handle for comfort and control 6. Supplied with three sets of interchangeable tips 7. Minium/Maximum Tip Capacity: Internal: 15-49mm ; External: 9-45mm Contents: Ø2.65mm Tips, 15°, 45°, Ø3mm Tips;45°, Circlip Pliers

Punch Tool 0XAT8083 1. All steel construction with spring loaded handles 2. Ø5mm Holes are suitable for preparing panels for MIG/spot welding 3. Fitted with non-slip PVC grips

External Circlip Pliers 0XPR3010 0XPR3012

Straight 45º Bent

1. Spring loaded jaw sets manufactured from hardened and tempered steel 2. Pliers are fully polished and fitted with non-slip polyfoam grips 3. Specifications: Ø1.5mm Tip - 10-40mm Capacity

Internal Circlip Pliers 0XPR3011 0XPR3013

Straight 45º Bent

1. Spring loaded jaw sets manufactured from hardened and tempered steel 2. Pliers are fully polished and fitted with non-slip polyfoam grips 3. Specifications: Ø1.5mm Tip - 12-65mm Capacity

354


GENERAL TOOLS Joggler & Punch Tool 0XAT8084 1. All steel construction with swivel head 2. Joggler tool produces a 10mm lip on 18-20 gauge mild steel or aluminium sheet 3. Push and turn head to produce 6mm holes 4. Ideal for spot/MIG welding car panels 5. Fitted with non-slip PVC grips

Joggler / Flanging Too 0XAT8085 1. All steel construction with spring loaded handles 2. Precision jaws make 10mm flange on 18-20 gauge mild steel or aluminium sheet and provide smooth flush joint between panels 3. Fitted with non-slip PVC grips 4. Length: 290mm

Hydraulic Puller Set 25pc 0XAT8038 Contents: 1pc - 10 ton Hydraulic Ram / 3pc - 100mm Leg 3pc - 150mm Leg / 3pc - 200mm Leg 1pc - Twin Head / 1pc - Triple Head 1pc - Ram Nut / 1pc - Beam 2pc - Extension Rod: 25 x 50mm & 25 x 100mm 4pc - Main Rod 200mm / 1pc - Separator 75-105mm 1pc - Bolt 5/8" / 1pc - Ram Service Kit

Flex-Head Angled Pry Bar Set 3pc 0XAT8009 1. The curved pry bar head is excellent for access into awkward areas for removing belts, mouldings, seals,bearing, manifolds, oil pans, axle drives, fuel injectors, etc. 2. Indexable to 180° for greater leverage with multiple locking positions 3. Contents/Length: 0XAT8009-01 250mm (10") 0XAT8009-02 300mm (12") 0XAT8009-03 380mm (15")

Heavy-Duty Pry Bar Set 4pcs 0XAT8020 1. Hardened & tempered chrome-vanadium steel blades with chrome satin finish 2. Supplied with comfortable handle with hammer cap 3. Sizes: 7/16" x 24"L, 7/16" x 18"L, 3/8" x 12"L, 1/4" x 8"L

355


GENERAL TOOLS Heavy-Duty Pry Bar Set 4pcs 0XAT8021 1. Chrome Molybdenum 16mm steel shafts with satin chrome finish and textured handles 2. Contents: 900mm (straight), 900mm (45 degrees), 600mm (75 degrees), 600mm (90 degrees)

Pry/Wrecking Bar 460mm 0XAT8036 1. Drop-forged Chrome Vanadium, 5/8" hex steel stock with chrome-plated finish 2. Hardened and tempered 3. Cranked chisel and pointed tips suitable for lining up components prior to assembly 4. Length: 460mm

Professional Pry Bar Set 4pc 0XAT8042 1. Hardened & tempered chrome-vanadium steel blades with chrome satin finish 2. Supplied with comfortable handle with hammer cap 3. Sizes: 7/16" x 24"(600mm)L; 7/16" x 18"(450mm)L; 3/8" x 12"(300mm)L;1/4" x 8"(200mm)L

Extendable/Adjustable Head Prybar 0XAT8233 1. Heavy-duty hardened and tempered Chrome Vanadium steel extendable prybar with blackened finish 2. Quick release locking mechanism retains extension at set increments giving twenty seven different shaft lengths from 600-915mm 3. Features 180° adjustable head, simply push button to adjust then release to lock into position 4. Ideal for commercial and agricultural use 5. Length: 600-915mm 6. Increments: 8mm

Interchangeable Heads Prybar Kit 8pc 0XAT8234 1. Extra strong tubular steel shaft handle with blackened finish and comfort styled grip 2. Includes seven heavy-duty one-piece heads, two wrecking bars, two woodworking bars, standard straight bar, punch bar and jimmy bar 3. All heads lock into place with a push-button quick release 4. Contents: Curved Wrecking Bar, Small Curved Wrecking Bar, Straight Woodworking Bar, 90° Angle Woodworking Bar, Standard Straight Bar, Punch Bar, Jimmy Bar, 650mm Handle

356


GENERAL TOOLS Extendable Prybar 0XAT8235 1. Heavy-duty hardened and tempered Chrome Vanadium steel with blackened finish 2. Quick release locking mechanism retains extension at set increments giving twenty different shaft lengths from 580-810mm 3. Ideal for general force and alignment work 4. Length: 580-810mm 5. Increments: 8mm

Heavy-Duty Pry Bar 0XAT8124

1200mm

0XAT8125

1400mm

1. Chrome molybdenum steel 22mm(7/8") steel shaft with black oxide finish and textured handle 2. Size: 45°

Parallel Pin Punch Set 6pc 0XAT8151 1. Hardened, tempered and fully polished Chrome Vanadium steel punches and chisels 2. Chrome-plated and mirror polish 3. Set supplied with composite chisel retainer 4. Contents: Ø2 x 9.5 x 115mm, Ø3 x 9.5 x 125mm, Ø4 x 9.5 x 150mm, Ø5 x 9.5 x 165mm, Ø6 x 12 x 180mm, Ø8 x 12 x 180mm

Taper Punch Set 5pc 0XAT8152 1. Hardened, tempered and fully polished Chrome Vanadium steel punches and chisels 2. Chrome-plated and mirror polish 3. Set supplied with composite chisel retainer 4. Contents: Ø2 x 9.5 x 120mm, Ø3 x 9.5 x 120mm, Ø4 x 9.5 x 120mm, Ø5 x 9.5 x 120mm, Ø6 x 9.5 x 120mm

Punch And Chisel Set 5pc 0XAT8153 1. Hardened, tempered and fully polished Chrome Vanadium steel punches and chisels 2. Chrome-plated and mirror polish 3. Set supplied with composite chisel retainer 4. Contents: Centre Punch #2 x 9.5 x 120mm, Taper Pin Punch Ø3 x 9.5 x 120mm, Parallel Pin Punch Ø4 x 9.5 x 150mm, Cold Chisel 12 x 9.5 x 130mm, Utility Chisel 5 x 9.5 x 130mm

357


GENERAL TOOLS Long Type Parallel Pin Punch Set 6pc 0XAT8154 1. Hardened, tempered and fully polished Chrome Vanadium steel punches and chisels 2. Chrome-plated and mirror polish 3. Supplied with composite chisel retainer 4. Contents: Ø3 x 9.5 x 200mm, Ø4 x 9.5 x 200mm, Ø5 x 9.5 x 200mm, Ø6 x 9.5 x 200mm, Ø8 x 12 x 200mm, Ø10 x 12 x 200mm

6pcs Heavy Duty Pin Punch Set 0XAT8230 Size: 1.7, 2.7, 3.7, 4.7, 5.7, 7.7 mm

Sheathed Parallel Pin Punch Set 7pc 0XAT8210 1. Hardened, tempered, steel punches with mirror polished chrome finish 2. Contoured foam grips for improved comfort and control 3. Supplied in storage tray 4. Contents: Ø 2, 3, 4, 5, 6, 7, 8mm

Thread Restoring File Set 3pcs 0XAT4021 1. Suitable for the restoration of external threads. 2. 220mm double-ended files each supplied with reversible vinyl grip. 3. Contents: File #1-11,12,13,14,16,18,20 & 24tpi ; File #2-9,10,12,16,20,27,28 & 32tpi

Zip-Acting Telescopic tube cutter 0XCT6034 1. Zip-acting Telescopic Cutter have a quick-acting mechanism for faster size adjustments. 2. Exclusive exact telescopic guide and durable zip-acting gear 3. Applications: Copper, brass and aluminum tubing and thin-wall conduit. 4. Capactity:6-67mm

2-in-1 Ratcheting Cutter 6-28mm 0XCT6051 1. Professional ratchet pipe wrench fitted with ergonomic contoured handle for added grip, ideal for use in confined spaces. 2. 2-in-1 Feature allows ratchet head to be removed for use as a standard hand pipe cutter. 3. Robust ratchet head features fully adjustable blade positioning providing a cutting capacity of Ø6-28mm. 4. Applications: Copper, aluminium and brass piping.

358


GENERAL TOOLS Mini Pipe Cutter 0XCT6026 1. Die-cast cutter body with heavy-duty HSS hardened cutting wheel. 2. Smooth screw action for clean cutting performance. 3. Capacity: 3-22mm

Scraper Set 4pc 0XAT5007 1. Chrome-vanadium steel shafts with blacked finish 2. Multi-purpose scrapers with comfort grip 3. Ideal for automotive applications

Gasket Scraper 0XAT5010-02B 1. Manufactured from carbon steel hardened, tempered and satin chrome finished with shot blast scraper end. 2. For cleaning cylinder heads, etc and removing old sealants and carbon, etc

Razor Blade Scraper 0XAT5071 1. Idealy for stripping paint, caulk, glue, etc. Rubber-coated grip to ensure a secure, comfortable cutting and scrapping job. 2. Angled scraping head and short handle get into confined areas 3. Insert the blade backwards for safe storage or carrying

Extended Razor Scraper 0XAT5205 1. Long handled razor scraper 2. Suitable for scraping gaskets 3. Also for removing labels, stickers and over spray from car windows 4. Safe storage of spare blades in handle 5. Supplied with three spare blades

Extended Razor Scraper 0XAT8019 1. Long handled razor scraper. Suitable for scraping gaskets and also for removing lables, stickers and over spray from car windows. 2. Safe storage of spare blades in handle. 3. Supplied with three spare blades.

External/Internal Restoring File 0XAT8014 1. Re-threading tool for renewing damaged thread on any diameter bolt, stud, axle or shaft file both right and left hand threads 2. Designed for use in hide & narrow area 3. 0XAT8014A Metric/Pitch: - 0.80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00 mm 0XAT8014B Imperial: - 24, 20, 18, 16, 14, 12, 11, 10tpi

359


GENERAL TOOLS Re-Threader Kit 42pc Metric 0XAT8015 1. Taps and dies are suitable for chasing out damaged threads and the removal of nicks and burrs without undercutting good threads 2. Thread file restores damaged external threads on any diameter, right or left hand

Thread Restoring File Set 3pc 0XAT8016 1. Suitable for the restoration of external threads 2. 220mm Double end files each supplied with reversible vinyl grip 3. Sizes: Imperial: File #1; 11, 12, 13, 14, 16, 18, 20, 24tpi File #2; 9, 10, 12, 16, 20, 27, 28, 32tpi Metric: File #1; 0.75, 1.0, 1.25, 1.5, 1.75, 2.0, 3.0mm Pitch

Thread Restoring Master Kit 51pc 0XAT8018 1. Suitable for restoring a wide variety of metric and SAE threads 2. Not suitable for use on hardened threads or for cutting new threads 3. Includes three thread files

Heavy Duty Punch and Chisel Set 6pc 0XAT8200 1. Made from chrome vanadium steel 2. Impact resistant safety molded tang-thru handles with shaft exposed give comfort and positive grip 3. Contains: Long taper punch 3/16" tip x 16" Diamond point Chisel 3/32" tip x 16" Long Cold Chisel 3/8" tip x 16" Long Cold chisel 1 3/16" tip x 16" Long Cold Chisel 2" tip x 16" Long Cold Chisel 3 1/16" tip x 16"

Chisel & Punch Set 13 Piece 0XAT8231 1. Hardened & tempered drop-forged chrome vanadium steel 2. Black finish and polish 3. Contents: Flat Chisel - 13x90mm, 16x90mm, 19x110mm, 22x130mm, 25x110mm Cap Punch - 6x110mm Taper Punch - 3x110mm & 6x110mm Pin Punch - 5x86mm & 6x86mm Centre Punch - 3x110mm & 5x86mm Chisel Holder

360


GENERAL TOOLS Interchangeable Punch & Chisel Set - 27pc 0XAT8236 Contents: 12 - Pin Punch: 2x80mm, 3x80mm, 4x90mm, 5x90mm, 6 x90mm, 8x90mm, 3x115mm, 4x130mm, 5x130mm, 6x130mm, 8x130mm, 10x130mm 6 - Taper punch: 1x80mm, 2x 80mm, 3x80mm, 4x80mm, 5x80mm, 6x80mm 1- Center Punch: 4x80mm 1- Cape Chisel: 5x80mm 1- Point Chisel: 10 x 80mm 6- Flat Chisel: 10x80mm, 12x80mm, 15x80mm, 19x130mm, 22x130mm, 25x130mm

Air Hammer System Suspension 6Pc Set 0XAT5142 1. Material: Cr-Mo Steel PH Black finish 2. Contents: 1-Air impact gun CFM 10 BPM 2100 Air Inlet 1/4" Air Hose 3/8" Piston 97mm Length 225mm 1-Adaptor for chisel 1-Ø25x110L 1- Ø25xR9x110L 1-1/2”Dr.Impact chiselx125L 1-3/8”Dr.Flexible chisel 1-Ø68x105L 3. Feature: Designed to impact the dust or difficult to removal nut or ball joint nut. 4. Suitable for under car using.

Special Vibro Chisel Set 8 pcs 0XAT5142A •Using the special vibro chisel set turns every commercially available compressed air chipping hammer to an ideal problem solver for opening rusted screw connections and for loosening components. •The screw loosener chisel attachment loosens screws with different profile effectively and carefully. •The strong vibrations of the compressed air chipping hammer are transferred direct to the screw connection whereas a rotating motion is applied using a commercially available wrench at the same time. •The hammer mandrel attachment is an amazing support with each extractor procedure (e.g. ball joint pivots). •Furthermore, the set includes a pressure plate adapter for driving out bearings/sleeves/bushes,etc.

Air Hammer System Suspension 5Pc Set 0XAT5143 1. A unique concept to aid the removal of seized suspension parts 2. Supplied with 4 impact hammers for variable applications.

361


GENERAL TOOLS Impact Hammer Bits Kit 4Pcs For Suspension 0XAT5144 1. For use with air hammer for the removal of seized suspension parts. 2. Hardened & tempered chrome-molybdenum steel.

Impact Glow Plug Removal Kit 1/4"Sq Dr. 0XAT1740 1. For safe and effective removal of 8, 10, 12mm glow plugs. 2. Supplied with deep 8, 10, 12mm Glowplug sockets and universal joint for ease of access. 3. Contents: Impact power Tool; Universal joint 1/4" sq dr. Impact deep socket - 8, 10, 12mm. 4. Specification: Air pressure: 90 psi Air inlet: 1/4” BSP

2 in 1 Mini Orbital Sander & Polisher 0XAT5226 1. Feature : Adjustable speed , 2 in 1 for car body. 2. Application:Orbital sander:15000RPM , weight: 0.5kg ; Orbital dameter: 3mm , Length: 118mm 3. Polisher: 6000RPM , weight: 0.6kg 4. Length: 130mm , 2"&3" velcro pad 5. white foam / yellow foam / wool bonnet 6. 3" sanding disc #80*20pcs, #150*20pcs, #240*20pcs 7. 2" sanding disc #80*20pcs, #150*20pcs, #240*20pcs

1000V Insulated Wire Strip

Item No.

L

Dmm H1mm H2mm 0XAT7501-06 6”/152mm Ø5=10 1.8 7.5

Weight g 215

1000V Insulated Long Nose

Item No.

L

Dmm H1mm H2mm

Weight g

0XAT7502-06 6”/152mm 2.8

1.8

7.5

185

0XAT7502-08 8”/203mm 3.0

2.0

7.5

250

1000V Insulated Diagonal

Item No.

L

Dmm H1mm H2mm

0XAT7503-06 6”/152mm 2.8

362

1.8

7.5

Weight g 220


GENERAL TOOLS 1000V Insulated Combination

Item No.

L

Dmm H1mm H2mm

Weight g

0XAT7504-06 6”/152mm

2.8

1.8

7.5

250

0XAT7504-07 7”/178mm

3.0

2.0

7.5

300

0XAT7504-08 8”/203mm

3.0

2.0

7.5

420

1000V Insulated H/D Diagonal

Item No.

L

Dmm H1mm H2mm

Weight g

0XAT7506-07 7”/178mm

3.0

2.0

7.5

295

0XAT7506-08 8”/203mm

3.0

2.0

7.5

302

1000V Insulated Ratchet

Item No.

Size

L

H

Weight g

D

0XAT7553A 3/8” Dr. 201.0mm 56mm 23.0mm

400

0XAT7553B 1/2” Dr. 233.2mm 61mm 27.5mm

640

1000V Insulated Extension

Item No.

Size

D1mm D2mm L1mm L2mm Weight g

0XAT7554A 3/8”Dr. 22.6

17.0

100

87

109

0XAT7554B 1/2”Dr. 29.7

21.2

125

105

222

1000V Insulated T-Handel

Item No.

363

Size D1mm D2mm L1mm L2mm Weight g

0XAT7555A 3/8”Dr. 17.5

17.5

197

206.5

400

0XAT7555B 1/2”Dr. 21.5

21.5

197

206.5

700


GENERAL TOOLS 3/8 DR. 1000V Insulated Socket

Item No. 0XAT7550-07 0XAT7550-08 0XAT7550-10 0XAT7550-12 0XAT7550-14 0XAT7550-S1 0XAT7550-S2 0XAT7550-S3 0XAT7550-S4 0XAT7550-S5

Size D1mm D2mm L1mm L2mm Weight g 7mm 8mm 10mm 12mm 14mm 1/4” 5/16” 3/8” 1/2” 9/16”

22.8 22.8 22.8 22.8 22.8 22.8 22.8 22.8 22.8 22.8

15.3 16.8 18.5 21.1 22.7 15.3 16.8 18.5 21.1 22.7

71.8 71.8 71.8 71.8 71.8 71.8 71.8 71.8 71.8 71.8

36.7 36.7 36.7 36.7 36.7 36.7 36.7 36.7 36.7 36.7

39 42 48 53 70 40 42 52 59 71

1/2 DR. 1000V Insulated Socket

Item No. 0XAT7551-10 0XAT7551-12 0XAT7551-13 0XAT7551-14 0XAT7551-17 0XAT7551-19 0XAT7551-22 0XAT7551-24

Size 10mm 12mm 13mm 14mm 17mm 19mm 22mm 24mm

D1mm D2mm L1mm L2mm Weight g 26.7 26.7 26.7 26.7 26.7 26.7 26.7 26.7

19.2 21.8 23.0 24.2 27.7 30.3 34.4 36.8

94.0 94.0 94.0 94.0 94.0 94.0 94.0 94.0

50.0 50.0 50.0 50.0 50.0 50.0 50.0 50.0

113 124 127 134 152 172 184 210

9pcs 1000V INSUL ATED 3/8"Dr. 0XAT7556 1. 1- 3/8"Dr. Reversible Ratchet 2. 1- 3/8"Dr. T-Handle 3. 1- 3/8"Dr. Extension Bar 100mmL 4. 5- 3/8"Dr. Sockets:7,8,10,12,14mm 5. 1- Pouch Storage

8Pcs 1000V Insulated 3/8" Dr. Reversible Ratchet Set 0XAT7557 1. Manufactured according to E60900: 2004. 2. For work in the area of live part up to 1000V AC. 3. VDE approved. 4. Contents: 1-3/8" Dr. Reversible Ratchet; 1-3/8" Dr. Extension: 100mmL; 5-3/8" Dr. Sockeet: 7, 8, 10, 12, 14mm

364


GENERAL TOOLS 12pcs 1000V INSUL ATED 1/2"Dr. 0XAT7559 1. 1- 1/2"Dr. Reversible Ratchet 2. 1- 1/2"Dr. T-handle 3. 1- 1/2"Dr. Extensions Bar 125mmL 4. 8- 1/2"Dr. Sockets:10,12,13,14,17,19,22,24mm

8pcs 1000V INSUL ATED 1/2"Dr 0XAT7560 1. 1- 1/2"Dr. Reversible Ratchet 2. 1- 1/2"Dr. Extensions Bar 125mmL 3. 5- 1/2"Dr. Sockets:14,17,19,22,24mm

8pcs 1000V INSUL ATED 3/8"Dr 0XAT7561 1. 1- 3/8"Dr. Reversible Ratchet 2. 1- 3/8"Dr. Extension Bar 100mmL 4. 5- 3/8"Dr. Sockets:7,8,10,12,14mm

1000V Insulated Screwdriver

Item No. 0XAT7600-01 0XAT7600-02 0XAT7600-03 0XAT7600-04 0XAT7600-05

365

axd 1.2 x 8.0 1.2 x 6.5 1.0 x 5.5 0.8 x 4.0 0.5 x 3.0

dxL

HxD

Weight g

8.0 x 170 6.5 x 150 5.5 x 125 4.0 x 100 3.0 x 75

120 x 36.0 110 x 33.0 110 x 33.0 100 x 29.5 87 x 25.5

169.5 114.0 95.0 59.0 37.0

Item No.

size

dxL

HxD

Weight g

0XAT7601-01 0XAT7601-02 0XAT7601-03 0XAT7601-04

PH3 PH2 PH1 PH0

8.0 x 150 6.0 x 100 4.5 x 100 3.0 x 75

120 x 36.0 110 x 33.0 100 x 29.5 87 x 25.5

158.0 93.0 63.0 37.5


GENERAL TOOLS 1000V Insulated Screwdriver

Item No.

axd

dxL

HxD

Weight g

0XAT7605-01 0XAT7605-02 0XAT7605-03 0XAT7605-04

1.2 x 6.5 1.0 x 5.5 0.8 x 4.0 0.4 x 2.5

6.5 x 150 5.5 x 125 4.0 x 100 2.5 x 85

97.5 x 22.3 97.5 x 22.3 83.5 x 19.5 78.3 x 15.8

81.0 62.5 34.5 19.5

Item No.

size

0XAT7606-01 PH2 0XAT7606-02 PH1 0XAT7606-03 PH0

dxL

HxD

Weight g

6.0 x 100 4.5 x 100 3.5 x 100

97.5 x 22.3 83.5 x 19.5 78.3 x 15.8

61.0 38.0 21.0

1000V Insulated Open End Wrench

Item No. 0XAT7700-07 0XAT7700-08 0XAT7700-10 0XAT7700-12 0XAT7700-14

Dmm Lmm H1mm H2mm Weight g

Size 7mm 8mm 10mm 12mm 14mm

17.7 89.0 10.0 20.5 98.5 11.6 25.0 113.7 13.5 29.0 133.9 15.3 33.8 155.0 18.1

5.5 5.8 6.7 6.8 8.5

20 26 40 61 96

1000V Insulated 75° Offset Box End Wrench

Item No. 0XAT7702-07 0XAT7702-08 0XAT7702-10 0XAT7702-12 0XAT7702-14

Size 7mm 8mm 10mm 12mm 14mm

Dmm Lmm H1mm H2mm Weight g 18.6 19.8 21.1 22.5 26.5

146.5 155.8 166.5 187.5 198.5

9.6 10.3 10.4 10.4 14.2

6.8 7.6 7.8 8.3 9.7

52 62 73 90 135

Long Reach Ribe Profit Bits 0XAT8089 1. 0XAT8089-01 M7x200mm Long, 3/8"Sq. Drive ; 0XAT8089-02 M8x240mm Long, 3/8"Sq. Drive 2. For use on headlight alignment on Alfa Romeo and Lancia

366


GENERAL TOOLS 1000V Insulated Cable Knife Item No.

Type

Dmm

Lmm

Hmm

Wmm

Weight g

0XAT7750

17.7

150.0

18.0

38.0

140

0XAT7751

20.0

150.0

18.0

38.0

148

0XAT7752

18.6

150.0

18.0

38.0

142

0XAT7753

20.0

150.0

18.0

38.0

133

0XAT7754

20.0

150.0

18.0

38.0

137

0XAT7755

20.0

150.0

18.0

38.0

145

27Pcs 1000V Insulated Tool Set 0XAT7808 1. 2-Pliers: 8"Combination Plier Polish ; 6"Diagonal Plier Polish 2. 5-Open End Wrench: 7, 8, 10, 12, 14MM 3. 4-Screwdrivers:PH1*100MM ,PH2*100MM 4. SL1.0*5.5*125MM,SL0.8*4.0*100MM 5. 2-Cable Knife( Item No. AT7755 & AT7751)

24Pcs 1000V Insulated Tool Set 0XAT7809 1. 2-Pliers: 8"Combination Plier Polish ; 6"Diagonal Plier Polish 2. 5-Open End Wrench: 7, 8, 10, 12, 14MM 3. 4-Screwdrivers:PH1*100MM ,PH2*100MM 4. SL1.0*5.5*125MM,SL0.8*4.0*100MM 5. 2-Cable Knife( Item No. AT7755 )

3/8" Drive Star Bit Set 10pc 0XAT8094 1. Overall Lenght:200mm 2. Contents:T10,T15,T20,T25,T27,T30,T40,T45,T50,T55

Angular Torque Gauge 1/2"Drive 0XAT1198 1. Designed to be used with any 1/2"drive torque wrench. 2. Tough composite dial and rotating index line allow operator to accurately tighten fixing to manufacturer's exact specification. 3. Supplied with fully adjustable reaction arm.

367


GENERAL TOOLS Torque Wrench Vde 3/8'' Sq Drive 20-100 Nm 0XAT1655A 1. Chrome Vanadium steel ratchet head with smooth action mechanism. 2. Calibration tolerance in accordance with BS EN ISO 6789:2003. 3. Accuracy of ±4% and issued with an individually numbered test certificate. 4. Fully insulated to VDE and EN 60900 to protect from electric shocks up to 1500V DC and 1000V AC. 5. Ideal for technicians working on modern hybrid and electrical vehicles (1500V DC safe live working). 6. Supplied in storage case.

20 PC Double Drive Extendable Ratchet Set 0XAT4068 1. Bit holder with 12 screwdriver bits and 6 universal dual spline sockets 5/16 '' 8 mm , 3/8'' 10 mm , 7/16'' 11 mm 1/2'' 13 mm , 9/16 '' 14 mm , 5/8'' 16 mm . 2. Bits PH1 , PH2 , PH3 ,T8 ,T10 ,T15 ,T20 ,S1 ,S2 3. Flat -1/8 , -3/16 , -1/4 4. Extendable and rotatable handle

TPMS installation torque tool 0XAT6202 1. 1/4” 11mm and 12mm sockets 2. 1/4” bits adapter 3. 3/8” to 1/4” socket adapter 4. 3/8” head universal T-handle torque wrench with rogue handle 5. Torque range from 20 to 90 in/lbs 6. 4 in-lb Slotting core head torque driver

TIRE LEVER 0XAT6208-03

12'', Size: 300mm long

0XAT6208-04

16'', Size: 400mm long

0XAT6208-05

20'', Size: 500mm long

0XAT6208-06

24'', Size: 600mm long

Forged Chrome Vanadium steel tyre lever, with hook and tapered ends.

Tire Changer Tools 0XAT6218 1. Size:120x5cm 2. Make tire demounting much easier 3. Material:45# steel

368


GENERAL TOOLS 3PC Tire Changer Tools 0XAT6224 1. Will not damage beads, saving valuable casings for successful retreading . 2. Eliminates the need to lift & rim to remove the bottom bead. 3. Make tire demounting much easier. 4. Seconds & remounted in less then twenty seconds. 5. Demount tires: 17.5 to 24.5 inches 6. Material:45# steel

Electrical Terminal Removal Kit 6pcs 0XAT8022 1. Set of six long and short picks/hooks suitable for removing round/ďŹ&#x201A;at electrical terminals plus O-rings, seals, bushings and cotter-pins. 2. Fitted with contoured handles for positive grip and ease of use.

Twin/Triple Arm Hydraulic Puller Set 19Pcs 0XAT8040 1. Forged steel 2-way yoke allows twin or triple leg pulls. With 10ton Hydraulic power unit with tommy bar. 2. Suitable for pulling hubs, ďŹ&#x201A;anges, gears and bearings. 3. Three 3-position puller arms and three sets of extension plates, supplied in carry-case. 4. Size: 100mm / 150mm / 200mm / 250mm 5. Spread/Reach: 50-100/0-100mm / 75-150/0-150mm / 100-200/0-200mm / 150-250/0-250mm

Decarbonizing & Cleaning Brush Set 36 pc 0XAT8115 1. The diameter of the brushes 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm 2. The material they are made of: nylon 0.3mm, 0.15mm steel, brass 0.15mm 3. Length of brush: 100mm, 4. Brush Handle: carbon steel, nickel-plated 5. Extension: 150mm 6. Handle: Plastic two-color

Balancer Shaft Puller -VAG 1.8 /2.0 Chain Drive 0XAT8708 - Used for removal of balancer shaft on 4 cylinder injection engine. (1.8 / 2.0 L - chain drive) - OEM Ref. T10394 - For VAG group VW - Golf 2004 >, Passat 2006 >, Passat CC 2009 >, Tiguan 2008 > EOS 2006 > ... Audi - A3 2004 >, A4 2008 >, A5 2008 >, TT 2007 > ... Seat - Alhambra 2011 >, Exeo 2009 >, Leon 2006 >, Toledo 2005 >, Altea 2005 >, Altea XL 2007 >,. Altea Freetrack 2007 >....

369


GENERAL TOOLS PVC Pipe Cutter 0XCT6035 1. Capacity: 1/8" ~ 1 3/8" (3~35mm) O.D. 2. Tube for plastic.

Pipe Flaring Tool Kit 0XCT8004 1. Suitable for producing single and double flares on copper tubing 2. Compact design with integral flare press and locking-grip-plier style pipe clamp make this tool particularly suitable for on-vehicle use. 3. Material:Carbon steel 4. Finished:Black oxied 5. Dies: 3/16", 1/4", 5/16", 3/8", 1/2"

Circlip Plier 90 Degreed 0XPR3016 Specifications "Drop forged, heat treated high-carbon steel." Specially designed to reach into deep work areas. Ideal for removing and installing the snap rings on hydraulic master cylinders on motorcycles. Spring loaded action for ease of use.

Power Bit Set Colour Coded with 2 in 1 Bit Driver 43 pc 0XSB3009 • Chrome Vanadium S2 steel. • Color coded for guaranteed fast indentification and includes 2 way bit driver. • Locking silider for 1/4" and 4mm Hex bit. • Flexible bit driver. • Extension bit driver. Bit size: - 4mm Hex dr. Phillps: PH1, PH0, PH00, PH000 Poze: PZ0 x 2 TX-Star: T4, T5, T6, T7, T8, T9, T10, T15, T20 Flat: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0 mm Hex: 0.7, 0.9, 1.3, 1.5, 2.0, 2.5, 3.0, 4.0 mm - 1/4" Hex dr. Phillps: PH1, PH2 Poze: PZ1, PZ2 TX-Star: T15, T25 Flat: 4, 6 mm Hex: 4, 6 mm

370


GENERAL TOOLS 10pcs 1/2" Dr. Special Automotive Socket Set 0XSW1015 Material : CR-V with phosphate coating

Door Handle Removal Tool 0XAT5239 1. Used for removal and installation of the lock cylinder housing on doors with no lock cylinder. 2. This removal tool for car door handle allows trouble - free loosening of the hard-to-reach locking hook 3. Suitable for : VW Golf (VI), Fox, Tiguan, Passat B6 (3C) / Audi Q7, etc.

Bolt Extractor Kit 3/8" Drive 6pc 0XAT8237 1. Manufactured from CR-MO hardened steel for maximum durability. 2. Sizes: 2, 3, 4, 6, 8, 10mm

Telescopic Magnetic Pick - Up & Mirror Set 2pc 0XAT8523 1. Φ10mm Magnet with 1.6kg capacity. 2. Φ40mm Mirror is mounted on twin ball joints for maximum articulation. 3. Pick-Up Min./Max. Extended Length: 175/885mm 4. Mirror Min./Max. Extended Length: 225/700mm

Telescopic Articulated Mirror Φ33mm 0XAT8524 1. Φ33mm Inspection mirror is mounted on twin ball joints for maximum articulation. 2. Min./Max. Extended Length: 225/935mm

Telescopic Articulated Mirror Φ30mm 0XAT8525 1. Chromed metal five section body with pocket clip for safes storage. 2. Φ30mm Inspection mirror is mounted on twin ball joints for maximum articulation 3. Round Mirror Dia.32mm & Length:180-525mm

Telescopic Magnetic Pick-Up Tool 1.5kg 0XAT8530 1. Metal bodied pick-up tool with gold cap, pocket-clip and magnetic retainer. 2. 1.5kg Pick-up capacity from Φ 10mm magnet. 3. Min./Max. Extended Length: 130/600mm

371


NOTE

340


Profile for InterCars SA

Profitool 2017 Catalogue  

Profitool 2017 Catalogue

Profitool 2017 Catalogue  

Profitool 2017 Catalogue

Profile for intercars

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded

Recommendations could not be loaded