HS protect Floor (ENG) by HS Protect

H S PRO TECT – FLO O R is an air-drying peelable coating designed to protect flooring from damage during construction, transportation and storage. It can easily be applied with an airless spray gun, paintbrush or paint roller.

H S PRO TECT – FLO O R protects everyone's interests! The temporary coating offers your floor tiles protection during the consecutive work of cabinetmakers, plumbers, electricians, painters, etc. The film protects tiles from scratches and stains acquired during construction. There will be no more need for corrosive chemical products to remove cement stains or paint splashes. Simply remove the foil before completion and your flooring will be of showroom quality.

H S PRO TECT – FLO O R will save you time, money and a lot of problems! Start using H S PRO TECT – FLO O R and discover this inexpensive and easy-to-use product and its effective results.

Do you work with natural stone floors such as marble or granite? Are you tired of seeing these beautiful stone tiles become damaged? Do not worry, we have found the perfect solution to your problem! H S PRO TECT – FLO O R + provides long-term protection of exclusive and expensive natural tiles, without affecting the shine or color of these delicate materials. Whether used on floors or faience, in bathrooms or kitchens, H S PRO TECT – FLO O R protects your customer relations!

Page 1

Benefits Overview: ü water-based, non-flammable and eco-friendly ü easy to apply/remove and highly cost-effective ü prevents damage ü benefits your customer relations

ü no cleaning needed after removal of the film ü can be disposed of as regular construction waste

Ready in 2 steps: apply and remove

NO MORE BULLSHIT

APPLY

REMOVE

Page 2

TECHNICAL DATA SHEET •

In General: H S PRO TECT – FLOOR is a revolutionary liquid film that forms a temporary peelable coating when dry. It was developed specifically for tiles (including joint filler) and other nonporous floors (e.g. laminate floors). The film is weatherproof and UV-resistant for up to 12 months outdoors. H S PRO TECT – FLOOR protects substrates against weathering, scratches, filthiness (e.g. paint or mortar splashes) and corrosive chemicals. Both interior and exterior use is possible.

•

Field of Application: H S PRO TECT – FLOOR was developed specifically for the protection of ceramic and laminated floors and polished natural tiles. It can also be applied to all combined nonporous surfaces such as glass or stainless steel. It should not be applied to untreated wood or porous surfaces.

•

Specifics:

Appearance

Liquid, white (see-through in dry condition)

Fixed Content

Approximately 40%

Density

1.05

Resistance / Durability

H S PRO TECT – FLOOR is weatherproof and UV-resistant for a maximum period of 12 months outdoors. It will not detach unless removed by peeling.

Drying time

H S PRO TECT – FLOOR will be surface-dry in approximately 30 minutes depending on the weather conditions. It takes 24 hours to completely dry the foil.

Health and safety

Nonflammable in both liquid and dry state. Local Suction: It is recommended to minimize the molar concentration during spray application.

Page 3

The use of protective clothing is advised. Avoid skin and eye contact. In case of: CONTACT WITH EYES: Rinse with water for at least 15 minutes. INHALATION: Inhale fresh air. CONTACT WITH SKIN: Rinse with water and soap. INGESTION: Remove from stomach by induced vomiting or aspiration. Seek medical attention. RELEASED/SPILLED MATERIAL: Absorb with inert material (e.g. sand, soil, etc.). Caution: Liquid emulsion can be very slippery. WATER DISPOSAL: In accordance with state, local, and federal requirements/measures.

•

Application Guidelines:

Application Temperature

Between 5°C and 35°C = Ideal temperature.

Manual Application

Apply by means of a paint roller. A minimal layer thickness of 200 micron in dry condition, 400 in wet, is recommended. Too thin of a layer will be difficult to remove.

Mechanical Application

Apply by means of a spray gun. Avoid spray-mist edges, so that the overall thickness of the layer is not compromised.

Cleaning

Equipment can be cleaned with warm water. Add detergent if necessary.

Repairs

In case of damage to the H S PRO TECT – FLOOR film, the film can easily be replaced by applying a new layer of H S PRO TECT – FLOOR above the existing one. The two layers will merge.

Removal

The temporary film H S PRO TECT – FLOOR can easily be removed with one move. At temperatures below 5 degrees Celsius, the film may become brittle, which, in turn, will hamper the removal process.

Remarks

The freshly applied H S PRO TECT – FLOOR film should be protected against rain for a 24-hour period. Once dry, the H S PRO TECT – FLOOR film layer becomes thermoplastic.

Page 4

•

Transport – Packaging – Storage: Store at room temperature in its closed original packaging. Screen from freezing temperatures. Limit open-air exposure to avoid bacterial growth. Allowed storage: maximum 12 months in non-opened original packaging.

In order to ascertain the suitability of the surfaces to be treated with the

H S PRO TECT products, the application of the

product to a pre-established test area is mandatory. Our company will not be held responsible for damages that may result from erroneous application of the

H S PRO TECT products.

Page 5