HS Protect CAR (eng) by HS Protect

H S PRO TECT – CAR is an air-drying peelable coating designed to protect cars from damage during assembly, transportation and storage. It can easily be applied with an airless spray gun, paintbrush or paint roller. It is THE solution to protect cars against stone chippings, bugs, horrible weather conditions and salt. All of these problems can harm the gorgeous lacquer finish of your vehicle and will, consequently, diminish its value. H S PRO TECT – CAR dries up to a thin-fitting protective layer. People working in the automobile industry will acknowledge the value of protecting auto parts and surfaces during the fabrication, assembly and distribution of cars. This rough and laminated coating is truly the best way to prevent scratches and abrasions. It also functions as a screen to protect against overspray paint. The film can be peeled off with one move and will not leave any stains or dirt. Our peelable coatings can be used for long-term external storage of vehicles/parts saving the use of internal storage space. Also, when they are loaded on deck, our coating will protect vehicles from corrosive elements they may come in contact with during long sea voyages. H S PRO TECT – CAR offers THE solution! H S PRO TECT – CAR has an easy application method; simply spray the product on the vehicle (or other surface in need of treatment). Once the coating is completely dry, it becomes resistant to water and solvents and acts as a buffer against sprayed emulsion paints, lacquers, oil, grease and water. The liquid coating can be applied on site or during production. No more time will be wasted on outdated packaging techniques. Seeing as the coating is a water-based product, all spray equipment can be cleaned with clear water. H S PRO TECT – CAR is chemical-free, non-flammable and can be disposed of as regular construction waste.

H S PRO TECT – CAR w ill save you tim e, m oney and a lot of problem s!

Blad 1

Benefits Overview: ü water-based, non-flammable and eco-friendly ü easy to apply and cost-effective ü prevents damage ü benefits your customer relations ü

the light blue color of the film is translucent, protecting both your privacy and safety

ü

no cleaning is required after removal of the film.

ü can be disposed of as regular construction waste

Ready in 2 steps: apply and remove

NO MORE BULLSHIT

APPLY

REMOVE

Blad 2

TECHNICAL DATA SHEET In General:

•

H S PRO TECT – CAR is a revolutionary liquid coating that forms a peelable film when dry. This coating was designed specifically for the coachwork of automobiles. The film is weatherproof and UVresistant for up to 12 months outdoors.

• Field of Application: H S PRO TECT – CAR is designed for the temporary protection of auto bodies. It can be applied to all non-porous surfaces.

•

Specifics:

Appearance

Liquid, blue

Fixed Content

Approximately 40%

Density

1.05

Resistance / Durability

H S PRO TECT – CAR is weatherproof and UV-resistant for a maximum period of 12 months outdoors. It will not detach unless removed by peeling.

Drying time

H S PRO TECT – CAR will be surface-dry in approximately 30 minutes depending on the weather conditions. It takes 24 hours to completely dry the foil.

Health and safety

Nonflammable in both liquid and dry state. Local Suction: It is recommended to minimize the molar concentration during spray application. The use of protective clothing is advised. Avoid skin and eye contact. In case of: CONTACT WITH EYES: Rinse with water for at least 15 minutes. INHALATION: Inhale fresh air. CONTACT WITH SKIN: Rinse with water and soap.

Blad 3

INGESTION: Remove from stomach by induced vomiting or aspiration. Seek medical attention. RELEASED/SPILLED MATERIAL: Absorb with inert material (e.g. sand, soil, etc.). Caution: Liquid emulsion can be very slippery. WATER DISPOSAL: In accordance with state, local, and federal requirements/measures.

•

Application Guidelines:

Application Temperature

Between 5°C and 35°C = Ideal temperature.

Manual Application

Apply by means of a paint roller. A minimal layer thickness of 200 micron in dry condition, 400 in wet, is recommended. Too thin of a layer will be difficult to remove.

Mechanical Application

Apply by means of a spray gun. Avoid spray-mist edges, so that the overall thickness of the layer is not compromised.

Cleaning

Equipment can be cleaned with warm water. Add detergent if necessary.

Repairs

In case of damage to the H S PRO TECT – CAR film, the film can easily be replaced by applying a new layer of H S PRO TECT – CAR above the existing one. The two layers will merge.

Removal

The temporary film H S PRO TECT – CAR can easily be removed with one move. At temperatures below 5 degrees Celsius, the film may become brittle, which, in turn, will hamper the removal process.

Remarks

The freshly applied H S PRO TECT – CAR film should be protected against rain for a 24-hour period. Once dry, the H S PRO TECT – CAR film layer becomes thermoplastic.

Blad 4

•

Transport – Packaging – Storage: Store at room temperature in its closed original packaging. Screen from freezing temperatures. Limit open-air exposure to avoid bacterial growth. Allowed storage: maximum 12 months in non-opened original packaging.

In order to ascertain the suitability of the surfaces to be treated with the

H S PRO TECT products, the application of the

product to a pre-established test area is mandatory. Our company will not be held responsible for damages that may result from erroneous application of the

H S PRO TECT products.

Blad 5