Hs epox english by HS Protect

H S PRO TECT – EPO X is an air-drying peelable coating designed to protect industrial flooring from damage during construction, transportation and storage. It can easily be applied with an airless spray gun, paintbrush or paint roller. H S PRO TECT – EPO X protects everyone’s interests! M ore im portantly, H S PRO TECT – EPO X protects your custom er relations! H S PRO TECT – EPO X simplifies the maintenance of industrial flooring. The temporary protective coating protects flooring against all types of stains (ink, glue, paint, dirt, etc.) and is easy to remove in one move. After using our product, your floors will be as good as new. H S PRO TECT – EPO X w ill save you tim e, m oney and a lot of problem s! H S PRO TECT – EPO X is an extremely tough and durable product. Neither the large number of people walking around on construction sites nor the heavy weight of lifting trucks will damage it. Our product does not contain any solvents, is non-brittle and will not be affected by paint, glue or oil. A variety of materials that you carefully placed and/or fabricated often requires multiple cleanups after construction. With H S PRO TECT – EPOX this can be avoided! H S PRO TECT – EPOX can be peeled off with one single movement, simultaneously removing all underlying gravel and dirt. Last but not least, it is important to note that H S PRO TECT – EPOX is chemical-free, nonflammable and can be disposed of as regular construction waste. H S PRO TECT – EPO X is a nonskid, safe and cost-effective product!

Benefits Overview: ü water-based, non-flammable and eco-friendly ü multifunctional product ü prevents damage ü can be applied to painted concrete floors and epoxy floors

ü can be applied to stone floors with sealed joints ü easy to apply/remove ü eliminates the use of chemical/corrosive cleaning products

Ready in 2 steps: apply and remove

NO MORE BULLSHIT

APPLY

REMOVE

TECHNICAL DATA SHEET •

In General:

H S PRO TECT – EPO X is a nonskid water-, alkali- and heatproof product designed specifically for industrial flooring that is excessively walked on.

•

Field of Application:

H S PRO TECT – EPO X is a revolutionary liquid coating that forms a temporary peelable layer. It is the perfect product for floors surrounded by presses and/or spraying systems or floors on lifting truck routes.

•

Specifics:

Appearance

Liquid, white (see-through in dry condition)

Fixed Content

Approximately 40%

Density

1.05

Resistance / Durability

H S PRO TECT – EPOX is weatherproof and UV-resistant for a maximum period of 12 months outdoors. It will not detach unless removed by peeling.

Drying time

H S PRO TECT – EPOX will be surface-dry in approximately 30 minutes depending on the weather conditions. It takes 24 hours to completely dry the foil.

Health and safety

Nonflammable in both liquid and dry condition. Local Suction: It is recommended to minimize the molar concentration during spray application. The use of protective clothing is advised. Avoid skin and eye contact. In case of: CONTACT WITH EYES: Rinse with water for at least 15 minutes. INHALATION: Inhale fresh air.

CONTACT WITH SKIN: Rinse with water and soap. INGESTION: Remove from stomach by induced vomiting or aspiration. Seek medical attention. RELEASED/SPILLED MATERIAL: Absorb with inert material (e.g. sand, soil, etc.). Caution: Liquid emulsion can be very slippery. WATER DISPOSAL: In accordance with state, local, and federal requirements/measures.

•

Application Guidelines:

Application Temperature

Between 5°C and 35°C = Ideal temperature.

Manual Application

Apply by means of a paint roller. A minimal layer thickness of 200 micron in dry condition, 400 in wet, is recommended. Too thin of a layer will be difficult to remove.

Mechanical Application

Apply by means of a spray gun. Avoid spray-mist edges, so that the overall thickness of the layer is not compromised.

Cleaning

Equipment can be cleaned with warm water. Add detergent if necessary.

Repairs

In case of damage to the H S PRO TECT – EPOX film, the film can easily be replaced by applying a new layer of H S PRO TECT – EPOX above the existing one. The two layers will merge.

Removal

The temporary film H S PRO TECT – EPOX can easily be removed with one move. At temperatures below 5 degrees Celsius, the film may become brittle, which, in turn, will hamper the removal process.

Remarks

The freshly applied H S PRO TECT – EPOX film should be protected against rain for a 24-hour period. Once dry, the H S PRO TECT – EPOX film layer becomes thermoplastic.

•

Transport – Packaging – Storage: Store at room temperature in its closed original packaging. Screen from freezing temperatures. Limit open-air exposure to avoid bacterial growth. Allowed storage: maximum 12 months in non-opened original packaging.

In order to ascertain the suitability of the surfaces to be treated with the

H S PRO TECT products, the application of the

product to a pre-established test area is mandatory. Our company will not be held responsible for damages that may result from erroneous application of the

H S PRO TECT products.