Hsp bouw english by HS Protect

H S PRO TECT – BOUW is an air-drying peelable coating designed to protect windows from damage during construction, transportation and storage. It can easily be applied with an airless spray gun, paintbrush or paint roller. H S PRO TECT – BOUW protects everyone’s interests! M ore im portantly, H S PRO TECT – BO U W protects your custom er relations! Thanks to this product, nothing but impeccable work will be delivered. The temporary peelable coating does not only protect the glass but also the frames of your windows. Unlike the conventional plastic film, which is still being used all over the world, this coating does not peel and is damage-resistant irrespective of the weather conditions. On completion, the coating can be removed in one single motion. H S PRO TECT – BOUW requires only a small investment but will save you a lot of repairs, cleaning and worries. Fast and hardworking construction workers are not always careful or meticulous in their actions. Upon completion, windows are often left damaged and/or stained. As a result, valuable time and money has to be spent on replacements and additional cleanups. H S PRO TECT – BOUW offers THE solution! The liquid coating can be applied during fabrication or on the construction site itself. No more time will be wasted on out-dated packaging techniques. H S PRO TECT – BOUW w ill save you tim e, m oney and a lot of problem s! H S PRO TECT – BOUW can be peeled off with one single movement, simultaneously removing all underlying gravel and dirt. Last but not least, it is important to note that H S PRO TECT – BOUW is chemical-free, nonflammable and can be disposed of as regular construction waste.

Page 1

Benefits Overview: ü water-based, non-flammable and eco-friendly ü easy to apply/remove and highly cost-effective ü prevents damage ü benefits your customer relations ü

no cleaning needed after removal of the film

ü can be disposed of as regular construction waste ü the light blue color of the film is translucent, protecting both your safety and privacy

Ready in 2 steps: apply and remove

NO MORE BULLSHIT

1 APPLY

2 REMOVE

Page 2

TECHNICAL DATA SHEET In General:

•

H S PRO TECT – BOUW is a revolutionary liquid product that forms a temporary peelable coating when dry. It is used to protect a variety of substrates. This foil was developed specifically for the protection of materials during construction, e.g. to protect windows and doors. The film is weatherproof and UV-resistant for up to 12 months outdoors. H S PRO TECT – BOUW protects substrates against weathering, scratches, filthiness (e.g. paint or mortar splashes) and corrosive chemicals that could damage them. Both interior and exterior use is possible.

Field of Application:

•

H S PRO TECT – BOUW was developed specifically for the temporary protection of window frames made out of PVC, aluminum, glass or stainless steel. It should not be applied to untreated wood or porous surfaces.

Specifics:

•

Appearance

Blue, liquid

Fixed Content

Approximately 40%

Density

1.05

Resistance / Durability

H S PRO TECT – BOUW is weatherproof and UV-resistant for a maximum period of 12 months outdoors. It will not detach unless removed by peeling.

Drying time

H S PRO TECT – BOUW will be surface-dry in approximately 30 minutes, depending on the weather conditions. It takes 24 hours to completely dry the foil.

Page 3

Health and Safety

Nonflammable in both liquid and dry state. Local Suction: It is recommended to minimize the molar concentration during spray application. The use of protective clothing is advised. Avoid skin and eye contact. In case of: CONTACT WITH EYES: Rinse with water for at least 15 minutes. INHALATION: Inhale fresh air. CONTACT WITH SKIN: Rinse with water and soap. INGESTION: Remove from stomach by induced vomiting or aspiration. Seek medical attention. RELEASED/SPILLED MATERIAL: Absorb with inert material (e.g. sand, soil, etc.). Caution: Liquid emulsion can be very slippery. WATER DISPOSAL: In accordance with state, local, and federal requirements/measures.

•

Application guidelines:

Application temperature

Between 5°C and 35°C = Ideal temperature.

Manual application

Apply by means of a paint roller. A minimal layer thickness of 200 micron in dry condition, 400 in wet, is recommended. Too thin of a layer will be difficult to remove.

Mechanical application

Apply by means of a spray fun. Avoid spray-mist edges, so that the overall thickness of the layer is not compromised.

Cleaning

Equipment should be cleaned with warm water. Add detergent if necessary.

Repairs

In case of damage to the H S PRO TECT – BOUW film, the film can easily be replaced by applying a new layer of H S PRO TECT – BOUW above the existing one. The two layers will merge.

Removal

The temporary film H S PRO TECT – BOUW can easily be removed with one move. At temperatures below 5 degrees Celsius, the film may become brittle, which, in turn, will hamper the removal process.

Page 4

Remarks

The freshly applied H S PRO TECT – BOUW film should be protected against rain for a 24-hour period. Once dry, the H S PRO TECT – BOUW film layer becomes thermoplastic.

•

Transport – packaging – storage: Store at room temperature in its closed original packaging. Screen from freezing temperatures. Limit open-air exposure to avoid bacterial growth. Allowed storage: maximum 12 months in non-opened original packaging.

In order to ascertain the suitability of the surfaces to be treated with the

H S PRO TECT products, the application of the

product to a pre-established test area is mandatory. Our company will not be held responsible for damages that may result from erroneous application of the

H S PRO TECT products.

Page 5