Basic safety instructions
2.3.2
Safety instructions for other operating modes
These safety instructions refer to special tasks relating to the use of the loader and servicing tasks - as well as emergency maintenance during operation or work concerning disposal of the auxiliary and operating materials. •
• • •
22
Observe the adjustment, maintenance and inspection tasks and deadlines as specified in the operating manual, including the specifications regarding replacing parts / partial equipment. Adjustment, maintenance and inspection tasks such as replacing parts may only be carried out by specialized personnel. Before maintenance work or other work can begin, operating personnel must be informed. Appoint a supervisor. For all work relating to the operation, conversion or adjustment of the loader and its safety devices, make sure that all switching on and off is performed according to the instructions in the operating manual.
•
• •
For all work relating to servicing, maintenance and repairs, observe the instructions in the operating manual for maintenance work and adhere to the time limits specified. Secure the maintenance area, allowing as large a space as required. If the loader is being completely shut off during servicing and maintenance work, please observe the following (see the chapter „Securing the Loader“): --Secure the loader from being accidentally turned back on by taking the key out of the ignition. --Attach a warning note to indicate that the loader is being worked on. --Only carry out servicing and maintenance work if the loader is parked on an even, hard surface and secured from rolling away and buckling. --If maintenance work can only be carried out when the work equipment (= lift frame) is raised, support it with a suitable safety support.
