1 minute read
Drive unit/gear – 2000
27 Screw Motor and gear housing PosDescriptionNote
28
8.2 Leakage from top cover
8.2.1 Dismantling
•Lift up the truck, and block up to ensure that it is stable.
•Unscrew the drive wheel.
•Unscrew the M8 nuts (28), that hold the gear and motor, with a box wrench. Support the gear so that it does not drop.
•Release the M8 bolts (12), that hold the cover (3), with a 6 mm hex socket wrench.
•Change the gasket (6).
8.2.2 Assembling is carried out in the reverse order
•Tighten the four M8 bolts and the four M8 nuts to a torque of 26.6 Nm Lock with Loctite 242.
