Functions of and How to Use User Mode (TT-300XL-1) Display Panel 1
9. Load radius limit symbol
1. Jib angle display When jib lift is selected, the jib offset angle is
This symbol indicates that the load radius display
displayed.
[11] is showing the registered load radius limit
When the number of parts of line select key or the
value.
display alteration key is pressed, the number of
The load radius symbol [10] is also displayed at
parts of line is displayed. Also, when an upper
the same time.
boom angle limit has been registered, the
10. Load radius symbol
registered upper boom angle limit value is
This symbol indicates that the load radius display
displayed while the register key is pressed.
[11] is showing the load radius.
2. Number of parts of line symbol
11. Load radius display
This symbol indicates that the jib angle display [1]
Normally displays the crane's load radius.
is showing the number of parts of line.
Displays the boom swing angle while the display
3. Boom length symbol
alteration key is pressed.
This symbol indicates that the boom length
When a load radius limit has been registered, the
display [13] is showing the boom length.
registered load radius limit value is displayed while the register key is pressed.
5. Jib angle symbol
13. Boom length display
This symbol indicates that the jib angle display [1]
Normally displays the boom length.
is showing the jib offset angle.
Displays the lifting height while the display
6. Jib lift symbol
alteration key is pressed.
This symbol indicates that the jib lift is selected.
When a lifting height limit has been registered, the
Its also indicates the condition of the jib.
registered lifting height limit value is displayed while the register key is pressed.
7. Actual load display Displays the actual load.
14. Lifting height symbol This symbol indicates the boom length display
8. Rated lifting capacity display
[13] is showing the lifting height.
Displays the rated lifting capacity.
19
W301-0311E
