Maintenance Mode

2.8.10 VCU check, Di check

Displays the status of VCU Di.

In the VC check selection menu of Fig. 2.8.1, select "Di Check (VCU)", and press the < > key (set) to display the Di check (VCU) screen shown in Fig. 2.8.8.

Pressing the < > key (previous page) or the < > key (next page) changes the pages.

To go back to the VCU check selection menu, press the < > key (cancel).

<Description of display contents>

Port Di 1 to Di 32, Di_IN_KEY : Di port of VCU

Detect

Close : Contact ON (CAN received data "1")

Open : Contact OF (CAN received data "0")

- (hyphen) : No signal received

[NOTICE]

Types for Di 25 to Di 32 can be switched between 24 V suction and 12 V discharge. Therefore, both (+) and (-) are displayed.

(Example) For Di 25, Di 25 (+) and Di 25 (-) are displayed.

Di 25(+) Di 25(-)

Note that only one of the two types changes. Check the detection status of both (+) and (-).