Adjustment mode

13.3.2 Description

Read the hourmeter value and odometer value.

"Reading Meter Value" is displayed on the screen during the reading operation.

If the reading of the meter value is failed, "Read Failure" is displayed on the screen. Press the < > key (cancel) to go back to the maintenance main menu.

When the reading of the hourmeter value and odometer value is completed, the hourmeter value and odometer value are displayed, and the rewrite item (hourmeter or odometer) can be selected.

Move the cursor by < > key (scroll up) and < > key (scroll down) to the item requested to be rewritten, and press the < > key (set). "Rewrite OK?" is displayed.

When the < > key (set) is pressed again, "Now Rewriting" is displayed on AML

Then, according to the result, "Rewrite Finish!" or "Rewrite Failure" is displayed on the screen

On the item selection screen, rewriting screen "Now Rewriting", or meter value read failure screen "Read Failure", press the < > key (cancel) to go back to the maintenance main menu.

On the rewrite complete screen "Rewrite Finish", rewrite failure screen "Rewrite Failure", or rewrite confirmation screen "Rewrite OK?", press the < > key (cancel) to go back to the item selection screen.