SECTION II - MACHINE FAMILIARIZATION
2.3 NOISE LEVELS (2000/14/EC) Sound power level Lwa = 101 dB (A) Sound power level guaranteed, determined in compliance with European standard 2000/14/EC. Sound pressure level in the operator’s seat
LWA
101
Lpa = 76 dB (A) Sound pressure level: continuous, equivalent and average (A) measured on an identical machine in compliance with ISO 6396:1992.
VIBRATION TO THE OPERATOR The vibration level to the operator depends mainly on the conditions of the ground where the machine is being operated and on the use conditions of the machine and its equipment. The exposition to vibrations can be remarkably reduced if the recommendations herebelow are followed: - use equipment suitable for the machine and the type of work to be carried out; - adjust and lock the seat in the correct position; regularly check for the seat suspensions and carry out adjustments or maintenance as required; - operate the equipment evenly, avoiding sudden motion or extreme shocks, if possible; - adjust speed and transfer route. Avoid very irregular routes or the impact with possible obstacles, in order to minimize the vibration level. • The weighted average quadratic acceleration value to which the operator’s arms are subjected does not exceed 2.5 m/s2. • The weighted average quadratic acceleration value to which the operator’s body is subjected does not exceed 0.5 m/s2. NOTE: this machine is equipped with an operator’s seat in compliance with standard ISO 7096:2000. This guarantees that the operator’s body exposures to vibrations respect the requirements for protection against vibrations when the machine is used according to its destination as explained in this manual.
32
F20455
