Specifications 2.13 Lift Capacities Lift Capacity Table (with short dipper arm) 16'3" (5.0 m)
13'0" (4.0 m)
9'9" (3.0 m)
6'6" (2.0 m)
3'3" (1.0 m)
0'0" (0.0 m)
13’0” (4.0 m)
16'3" (5.0 m) 13'0" (4.0 m)
9’9” (3.0 m)
6’6” (2.0 m)
A
9'9" (3.0 m)
B
6'6" (2.0 m) 3'3" (1.0 m)
0'0" (0.0 m) -3'3" (-1.0 m) -6'6" (-2.0 m) -9'9" (-3.0 m) -13'0" (-4.0 m) 16'3" (5.0 m)
13'0" (4.0 m)
9'9" (3.0 m)
6'6" (2.0 m)
3'3" (1.0 m)
0'0" (0.0 m)
13’0” (4.0 m) 9’9” (3.0 m) 6’6” (2.0 m) 3’3” (1.0 m) 0’0” (0.0 m) -3’3” (-1.0 m) -6’6” (-2.0 m)
2,337* (1060*) 2,260* (1025*) 2,304* (1045*) 2,403* (1090*) 2,524* (1145*) 2,668* (1210*) 2,767* (1255*)
1,786 (810) 1,290 (585) 1,080 (490) 1,003 (455) 1,014 (460) 1,135 (515) 1,554 (705)
2,227* (1010*) 2,612* (1185*) 3,120* (1415*) 3,428* (1555*) 3,329* (1510*)
1,720 (780) 1,609 (730) 1,477 (670) 1,378 (625) 1,345 (610)
3,483* (1580*) 4,905 (2225*) 5,368* (2435*) 5,049* (2290*) 3,924* (1780*)
2,535 (1150) 2,183 (990) 2,028 (920) 2,017 (915) 2,094 (950)
8,973* (4070*) 6,614* (3000*)
3,946 (1790) 4,101 (1860)
Maximum permissible load on extended dipper arm A Overhang from the center of the turntable. B Height of load fixing point * Lifting capacity hydraulically limited.
All table values are in lbs. (kg) and for a machine in a horizontal position on firm ground without bucket.
With the dozer blade in driving direction
Without the dozer blade, 90° to driving direction
Calculation basis: According to ISO 10567. The excavator's lift capacity is restricted by the settings of the pressure relief valves and the hydraulic system's stabilizing features. Neither 75% of the static tilt load nor 87% of the hydraulic lift capacity is exceeded.
918175/AP0605
2-11
