Fuel System

6.Carefully free the instrument panel. Disconnect the oil pressure pipe from the gauge. The machine is fitted with a heat indicator, the transmitter must be removed from the cylinder head. Disconnect the tractor meter drive at the instrument panel.

7.Turn the steering wheel to the full left hand lock and remove the steering wheel retaining nut and washer. Remove the steering wheel from the keyed taper.

8.Remove the two cap screws securing the governor control bracket to the steering column. Disconnect the governor lever to cross shaft control rod and withdraw the governor control lever complete with bracket.

9.Remove / disconnect the wire connection from the Tank unit / Fuel gauge sender.

10.The tank is rubber mounted onto the front and rear scuttle supports. Free the slacken off the securing bolts and locknuts. Lift the tank upwards and away from the steering column housing. Remove the lower mounting pads.