OPERATING INSTRUCTIONS ____________________________________________
3. Do not use the starter motor for more than 10 seconds without stopping. Wait one minute between starts so the starter motor can cool. 4. If the engine stops when operating with a load, immediately start the engine again to prevent overheating caused by stopping the flow of oil for cooling and lubrication. 5. If the charge indicator comes on during operation, determine and correct the cause to avoid complete discharge of the battery and possible damage to other components of the electrical system. See your Dealer. 6. If the coolant temperature indicator comes on, remove the load and allow the engine to run at 1500 rpm until the indicator goes out. If the indicator does not go out within one minute, stop the engine and determine the cause.
47
16 Series, Model - 2816 4WD
