Control, operation
Operating manual
Working with the machine
of the machine during travel as well as working. – The machine operator determines the vibration impact to a great part, since he himself selects the speed, the gear ratio, the working manner and the travel route. This results in a wide range of various vibration impacts for the same machine type. The full body vibration impact for the machine operator can be reduced if the following recommendations are observed: – Select the appropriate machine, equipment parts and auxiliary devices for the corresponding tasks. – Keep the seat in good order and adjust it as follows: • The seat adjustment and the suspension should be made according to the weight and the size of the operator. • Check the suspension and the adjustment mechanism regularly and make sure that the characteristics of the seat remain as specified by the seat manufacturer. – Check the maintenance condition of the machine, especially regarding: Tire pressure, brakes, steering, mechanical connections, etc. – Do not steer, brake, accelerate and shift or move and load the attachment of the machine in a jerky manner. – Match the machine speed to the travel route to avoid vibration impacts. • Decrease the speed when driving on pathless terrain; • Drive around obstacles and avoid very impassable terrain. – Keep the quality of the terrain where the machine is working and travelling in good order: • Remove large rocks and obstacles; • Fill furrows and holes; • To establish and retain suitable terrain conditions, keep machines available and allow for sufficient time. – Travel longer distances (i.e. on public roads) with suitable (medium) speed. – For machines, which are frequently used for travel, consider use of auxiliary ride control systems, and also monitor speed to minimize buildup of "pitching" vehicle movement.
3.4.2
Low idle automatic The idle automatic function automatically reduces the engine speed without actuation of the joystick or the travel pedal. This helps save fuel and reduces the noise level. By touching the joystick or the pedals, the engine speed returns to the initial level. This function is activated with the low idle automatic button: Press the button. The idle automatic is activated. The indicator light in the switch flashes. Press the button again. The idle automatic is deactivated. The indicator light in the switch is off.
copyright by
3 - 70
MJFCIFSS
A 312 Litronic / 11140216
