For operations planning 3.1 Information
3
For operations planning
3.1
Information The following section gives information on the topics of: – assembly, – identification, – transport dimensions and weights, – slinging points and – transport.
Assembly
The lengths in each case are given as the distance between the centre of the locking pin (on the main boom head) and the front edge of the head sheave. For this reason, the lengths of the individual parts given in Transport dimensions and weights and their totals do not agree with the lengths stated here.
Identification
S Transport dimensions and weights
Risk of accidents if not adjusted correctly The lattice extension is designed for the truck crane with which it was delivered. If a lattice extension is for use on several truck cranes, it must be matched to the truck crane and marked with the serial number. Adjustments to the lattice extension may only be carried out by CraneCARE. This prevents malfunctions and damage.
Take note of the data on the weight and dimensions of the lattice extension in the respective sections. The dimensions listed here, and their totals, do not agree with the data listed in the Assembly section.
21.08.2008
s
Operating instructions lattice extension GMK 5130-2/5110-1
3 112 518 en
3-1
