PWP SYSTEM OPERATIONAL TROUBLESHOOTING Problem
Possible Cause
Remedy
PWP System is not activated.
With PWP System switch “ON,” apply service brakes for three seconds until PWP switch lamp is lit continuously.
Machine is not level.
Level the machine.
PWP System remote shutdown switch is disengaged.
Engage the PWP System remote shutdown switch.
40’ and 44’ models: PWP System remote shutdown switch is not plugged into the connector at the end of the boom.
Plug in and engage the PWP System remote shutdown switch.
55’ model: Low or dead batteries in PWP System remote shutdown switch.
Replace batteries and engage the PWP System remote shutdown switch.
PWP System level unplugged or faulty.
sensor
Contact your Gehl dealer for assistance.
PWP System is not de-activated.
With engine running, apply service brakes for three seconds until PWP switch lamp goes off.
PWP System switch lamp flashes when switch is pressed to “ON.” Parking brake did not engage when PWP System switch was pressed to “ON.” Carriage tilt and auxiliary functions continue operating when the PWP System switch is pressed to “ON.” Transmission does not remain de-clutched when shifted into “Forward” or “Reverse” when the PWP switch is “ON.”
Boom control functions do not operate.
PWP System switch lamp flashes when switch is turned “OFF.” Parking brake switch lamp stays “ON” when PWP System switch is “OFF.”
50960102/BP0717
90
PRINTED IN U.S.A.
