Chapter 4 OPERATING AND SAFETY INSTRUCTIONS A - BEFORE STARTING THE TELESCOPIC HANDLER
C - ENVIRONMENT
 Perform daily maintenance (see chapter: 6 MAINTENANCE: A - DAILY OR EVERY 10 HOURS SERVICE).
 If the telescopic handler must be used in a dark area or at night, make sure it is equipped with working lights.
 Make sure the lights, indicators and windshield wipers are working properly.
 During operation, make sure that no one is in the way of the telescopic handler and its load.
 Make sure the rearview mirrors are in good condition, clean and properly adjusted.
 Do not allow anybody to come near the work area of the telescopic handler or pass under an elevated load.
 Comply with all work site safety rules.
 Make sure the horn works.
 When using the telescopic handler on a side slope, before lifting the boom, follow the instructions given in the paragraph: INSTRUCTIONS FOR HANDLING A LOAD: M - TRANSVERSE ATTITUDE OF THE TELESCOPIC HANDLER.
B - OPERATOR INSTRUCTIONS Â Whatever his/her experience, the operator is advised to familiarize himself/herself with the location and operation of all the controls and instruments before operating the telescopic handler.
 Travelling on a longitudinal slope:
 Wear clothes suited for operating the telescopic handler. Avoid loose clothing.
•
Drive and brake gently.
•
Moving without a load: Forks or attachment facing downhill.
•
Moving with a load: Forks or attachment facing uphill.
 Make sure you have the appropriate personal protective equipment for the job.  Prolonged exposure to high noise levels may cause hearing problems. It is recommended to wear ear muffs to protect against excessive noise.  Always keep alert when using the telescopic handler. Do not listen to the radio or music using headphones or earphones.
 Never move onto a trailer without having first checked: •
That it is suitably positioned and made fast.
 Never operate the telescopic handler when hands or feet are wet or soiled with greasy substances.
•
That the unit to which it is connected (wagon, truck, etc.) will not shift.
 For increased comfort, ensure that the seat is adjusted to your requirements and in the correct position.
•
That the trailer is suitable for the total weight of the telescopic handler.
•
That the trailer is suitable for the size of the telescopic handler.
WARNING
 Never move onto a bridge, floor or elevator, without being certain that it is suitable for the weight and size of the telescopic handler and without having checked that it is in good condition.
DO NOT adjust the seat while the telescopic handler is moving.
 Be careful in the area of loading bays, trenches, scaffolding, soft ground and manholes.
 If a control is equipped with a locking device, it is forbidden to leave the cab without first locking the control in neutral.
PRINTED IN U.S.A.
21
913222/CP0507
