ENGINE MAINTENANCE - 11 MAINTENANCE SCHEDULE Location and Service
Check Daily
Check coolant level - Fresh-water cooled models only
X
Check oil level - Engine crankcase
X
Check oil level - Transmission
X
Engine Assembly (complete - Check for obvious leaks (water, oil, fuel and exhaust)
X
Remote Control and Steering System Check for proper operation
X
Sea Strainer - Check (if equipped)
X
Cooling System - Check condition and tightness of all hose clamps
After 1st 25 Hrs of Operation
Every 50 Hours of Operation
X
Cooling System - Inspect/Replace raw water pump impeller
Every 100 Hours of Operation
Once Each Year
X1
X
X
X
Drive Belt - Inspect condition and check tension
X
X
X
Exhaust System - Check condition and tightness of all hose clamps
X
X1
X
Ignition System and Spark Plugs - Clean and inspect condition
O
O
O
Engine Assembly (complete) - Check for loose, missing or damaged parts (especially engine mounts, starter and alternator mounting fasteners)
X
X
X
Change engine oil and filter
X
Engine Alignment - Check and adjust if necessary
O
Exhaust System - Check for water leaks at the manifold, riser and elbow gaskets
X
X
X
O
Ignition Timing - Not Adjustable Battery - Check electrolyte level and specific gravity. Inspect case for damage. Check cables and connections.
X
Electrical System (complete) - Check for loose or dirty connections and damaged wiring Flame Arrestor and Crankcase Ventilation System - Clean and inspect
66
X
X
X2
X
X
L510001-09
X
