Setting in transport mode

22

27 26

27

A

Y 2

W 5

6

7 Setting in transport mode

–Switch on tractor engine. –Raise wrapping table • Set three-way valve to position II (refer to decal). • Turn emergency stop switch (A) to release wrapper from its safety position. • Press "Raise/lower wrapping table" key (Y) in Uniwrap control box: that triggers "Raise/lower wrapping table" function. • Press key (W) to raise wrapping table completely (see Fig.8).

Danger!

Risk of fatal injury. If bale twister falls accidentally, it can cause serious injury. ☞Nobody must stand in the bale twister swivel area when it is triggered by control box.

8

• Press emergency stop switch to clamp wrapper and make it safe.

Caution!

At this stage, bale twister is in intermediate transport position and looks as shown in Fig.8: table is jammed hydraulically in this position.

Danger!

Damage to bale twister. ☞Do not transport wrapping baler when bale twister is in intermediate transport position.

–Stop tractor engine and remove ignition key. (Fig.6,7,8)