Checking magnet position

K 6

P K 19

20 Checking magnet position

–Switch on tractor engine. –Raise wrapping table: • Set three-way valve to Position II (refer to decal). • Turn emergency stop switch (A) to release wrapper from its safety position. • Press "Raise/lower wrapping table" key (Y) in Uniwrap control box: that triggers "Raise/lower wrapping table" function. • Press (M) key to raise wrapping table slightly. –Switch off tractor engine. –Remove ignition key. –Check magnet alignment (K) with magnetic sensor (P) attached to wrapping table. –Check distance separating magnet (K) from electronic sensor (P): • If adjustment is correct, the distance between magnet (K) and sensor (P) is between 6 and 8mm. • If necessary, adjust position of the magnetic sensor (P) to obtain the necessary distance. (Fig.19,20)