1 minute read
Modifying wrapping arms
R
R
R
P X
X
X
N
L
O
L Modifying wrapping arms Drilling new holes for fixing protective covers
–Drill 6 new holes (R), 10mm in diameter, above existing holes. X = 30 mm
(Fig.14)
Fitting protective covers
–Refit wrapper roller/chassis assembly (P) on wrapping arm, using new holes (R) and original screws. Tightening torque: 24.5 Nm –Refit support (O) with original screws. Tightening torque: 24.5 Nm –Refit protective plate (N) with original screws. Tightening torque: 24.5 Nm (Fig.15,16)
–Refit connector (L). (Fig.17)
14
15
16
