02 Transmission/clutch Rear axle
Measurements and checks Checking the rear axle lubrication pressure and flow rate Test conditions: – Engine running at 2 200 rpm. – Transmission oil temperature: 60°C. – Transmission engaged (tractor made safe on stands). – No actuator activated (spool valves, steeering, PTO, etc.).
HYDRO TESTER
Fig. 36
a2102000
• Fit the flowmeter and pressure sensors of kit Nr. 00 0178 310 0 and 00 0178 320 0. • Connect tester No.00 0178 310 0 to the pressure and flow sensors. • The values measured must be about 18 l/min and 4 bar. This flow rate is given in l/min for information.
52
Arion 430-410 – 12.2009 – GB
