ADJUSTMENT OF THE CLUTCH PEDAL

Z152 2,5 mm

R73 60,5 mm 60,5 mm

80, 1° A

27 mm

16,5 mm 30,5°

19,5 mm

169 mm 1 33 mm

60amsm08

Important: First check the mechanical adjustment of the pedal and low position contact.

• Adjust the (A) rod to 60,5mm between the ball joint axes. • Set the "R73" angular detector to ensure the setting ports are at mid-travel. • Using "CLAAS Diagnostic system (CDS)" or a multimeter and harness Nr.6005005734, check that: – The voltage value on the lower end stop is 0,5±0,1 V. – The voltage value on the upper end stop is 4,5±0,1V. • Adjustment of clutch clearance: – Set the pedal to lower stop.

Fig. 15

– Adjust the position of the "BOCZ152" contact: distance between the contact and pedal 2,5 mm. – Press the clutch pedal to check that a 1±0,1 voltage appears on the potentiometer when the "BOC" contact opens.