Hydraulic oil filter indicator 50 Transmission oil filter indicator

TRAININGMANUAL

PROGRAMMINGTHEINFORMATIONCENTER

Hydraulic Filter Restriction Switch Check

This will check the wiring from the information center to the hydraulic filter restriction switch in the head of the filter base to make sure that it is functioning properly. The information center monitors the temperature of the hydraulic oil and if the temperature is below 20o C it will not activate the warning indicator. This same check will also show if the hydraulic filter restriction switch indicator light is functioning.

1 Turn the key switch to the on position, do not start the machine. 2 Advance to display field number 021 using the programming entry procedure listed previously. The hydraulic filter restriction light will flash intermittently. 3 Press the Program/Reset switch back to the center position. You should see a 00 in the display. This is indicating that the switch is not being activated. If you see a 01 in the display with the machine off this indicates a short in the wiring. If the test is performed with the machine running the reading on the display will depend on if the filter is bypassing. 4 Press the Program/Reset switch to the Reset position to exit the monitoring mode. 5 Turn the key switch to the off position. Up count Program

Down count Reset

Air Filter Restriction Switch Check

This will check the wiring from the information center to the air filter restriction switch in the air cleaner to make sure that it is functioning properly. This same check will also show if the air filter restriction switch indicator light is functioning.

1 Turn the key switch to the on position, do not start the machine. 2 Advance to display field number 022 using the programming entry procedure listed previously. The air filter restriction light will flash intermittently. 3 Press the Program/Reset switch back to the center position. You should see a 01 in the display. This is indicating that the switch is not being activated. If you see a 00 in the display with the machine off this indicates a short in the wiring. If the test is performed with the machine running the reading on the display will depend on if the filter is plugged. 4 Press the Program/Reset switch to the Reset position to exit the monitoring mode. 5 Turn the key switch to the off position.

TRAININGMANUAL

PROGRAMMINGTHEINFORMATIONCENTER

Work Lights Check

This will check the wiring from the information center to the machine work lights to make sure that it is functioning properly. This same check will also show if the work lights indicator light is functioning. It does not check the wiring from the information center to the work lights switch located in the cab.

1 Turn the key switch to the on position, do not start the machine. 2 Advance to display field number 023 using the programming entry procedure listed previously. The work lights indicator light will flash intermittently. 3 Press the Program/Reset switch back to the center position. You should see a 00 in the display with the work lights off. Turn the work lights switch to the on position. You should see the display reading change to 01 and the work lights should operate normally. 4 Press the Program/Reset switch to the Reset position to exit the monitoring mode. 5 Turn the key switch to the off position. Up count Program

Down count Reset

Fog Lights Check

This option is not available on North American units.

Air Conditioning Switch Check

This will check the wiring from the information center to the air conditioning high/low pressure switch to make sure that it is functioning properly. This same check will also show if the air conditioning pressure indicator light is functioning. It does not test the wiring from the air conditioning switch to the information center in the cab.

1Turn the key switch to the on position, do not start the machine. 2Advance to display field number 025 using the programming entry procedure listed previously. The air conditioning switch light will flash intermittently. 3Press the Program/Reset switch back to the center position. You should see a 00 in the display. This is indicating that the switch is not being activated. If you see a 01 in the display with the machine off this indicates a short in the wiring or the switch is being activated. 4Start the machine and turn the air conditioning on. You should still see 00 in the display indicating everything is functioning normally. If you see 01 that tells you that the switch is being activated and there is a problem with the system. 5Press the Program/Reset switch to the Reset position to exit the monitoring mode. 6Turn the key switch to the off position.

Transmission Filter Restriction Switch Check

This will check the wiring from the information center to the transmission filter restriction switch in the head of the filter base to make sure that it is functioning properly. The information center monitors the temperature of the transmission oil and if the temperature is below 20o C it will not activate the warning indicator. This same check will also show if the transmission filter restriction switch indicator light is functioning.

1 Turn the key switch to the on position, do not start the machine. 2 Advance to display field number 026 using the programming entry procedure listed previously. The transmission hydraulic filter restriction light will flash intermittently. 3 Press the Program/Reset switch back to the center position. You should see a 00 in the display. This is indicating that the switch is not being activated. If you see a 01 in the display with the machine off this indicates a short in the wiring. If the test is performed with the machine running the reading on the display will depend on if the filter is bypassing. 4 Press the Program/Reset switch to the Reset position to exit the monitoring mode. 5 Turn the key switch to the off position.