Up / Down count switch 36 Program / Reset switch

TRAININGMANUAL

INSTRUMENTCLUSTERLAYOUT

37 Rear Fog Lights

- Fitted only on European models 38 Beacon Indicator - This indicator will illuminate when the beacon is turned to the on position. 39 Work LightsIndicator - This indicator illuminates when the work lights on turned on. 40 Pilot Control Actuator - This indicator illuminates when the pilot lockout is actuated. 41 Low Coolant Indicator - This indicator illuminates when the engine coolant is low. The alarm will sound continuously and the stop master indicator lamp will also be red. 42 Brake Pressure Indicator - This indicator illuminates when the brake system pressure is too low. Th alarm will sound continuously and the stop master indicator lamp will be red.

43 Stop Master Indicator - When this indicator illuminates it is informing the operator that a major system malfunction has been detected. Action must be taken to correct the problem immediately. The machine must be stopped and the engine shut down. The stop light will illuminate if one or more of the following circumstances exists: Low engine oil pressure Low brake pressure Low steering pressure Low engine coolant level High engine coolant temperature High hydraulic oil temperature High transmission oil temperature

44 Caution Master Indicator - When this indicator illuminates it is informing the operator that a system malfunction has been detected. Action must be taken to correct the problem. The caution light will illuminate if one or more of the following circumstances exists: Parking brake engaged and forward or reverse selected. High engine coolant temperature High hydraulic oil temperature High transmission oil temperature Low engine oil pressure Air filter restriction switch activated Transmission filter restriction Alternator malfunction Low fuel level Hydraulic oil filter restriction 45 Secondary Steering Indicator (If Equipped) - This indicator illuminates when the primary steering pressure is low. The alarm will sound continuously and the stop master indicator will illuminate.

46 Parking Brake Indicator - This indicator illuminates when the parking brake is applied. When the parking brake is applied and the machine is shifted into forward or reverse the alarm sounds for 3 seconds and the caution master indicator turns yellow.

47 Air Conditioner Indicator - This indicator illuminates when the air conditioner has stopped due to refrigerant pressures that are too high or too low. The alarm sounds for 3 seconds and the caution master indicator turns yellow. This light may also light if the outside air temperature is too cool for the system to operate.

48 Air Filter Indicator - This light illuminates when the air filter is restricted and requires service. The alarm sounds for 3 seconds and the caution master indicator turns yellow.

49 Hydraulic Oil Filter Indicator - This light illuminates when the hydraulic filters are restricted and require changing. The alarm sounds for 3 seconds and the caution master indicator turns yellow.

50 Transmission Oil Filter Indicator - This indicator illuminates when the transmission filters are restricted and require changing. The alarm sounds for 3 seconds and the caution master indicator turns yellow

The Instrument Cluster also contains six individual 12 bar graph liquid crystal diode (LCD) displays. These are located in the following positions on the instrument cluster and serve the following functions.

TRAININGMANUAL

INSTRUMENTCLUSTERLAYOUT

54 Transmission Oil Temperature Gauge

When the transmission oil temperature is in the normal operating zone a green LCD will be illuminated The information center monitors the transmission oil temperature with two sensors, one located at the torque converter output and one located in the sump of the transmission. The information center compares the two readings and monitors both temperatures to determine if the transmission has overheated. As the temperature starts to increase the bars move into the yellow zone and begin to flash, the warning alarm sounds for three seconds and the caution indicator turns yellow. When the transmission oil temperature continues to increase the bars move into the red zone and continue to flash, the warning alarm sounds continuously and the stop indicator turns red. When the temperature decreases the LCDís move back into the yellow zone and the red warning light goes out and the yellow caution light turns on. If the temperature falls to bar 10 in the green zone the yellow caution light goes out. If the temperature rises back into the yellow zone the caution light turns back on, however, the alarm does not sound. The temperature must fall to bar 9 in the green zone and then increase to the yellow zone again to sound the alarm for three seconds again. The following table lists the relative temperatures for each of the 12 LCD display bars.

Bar number Temperature (°F) Temperature (°C) Indicator color

12 257 125 Red 11 248 120 Yellow 10 239 115 Green 9 230 110 Green 8 212 100 Green 7 194 90 Green 6 176 80 Green 5 158 70 Green 4 140 60 Green 3 104 40 Green 2 68 20 Green 1 <68 <20 Yellow

55Hydraulic Oil Temperature Gauge

When the hydraulic oil temperature is in the normal operating zone the green LCD will be illuminated As the temperature starts to increase the bars move into the yellow zone and begin to flash, the warning alarm sounds for three seconds and the caution indicator turns yellow. When the hydraulic oil temperature continues to increase the bars move into the red zone and continue to flash, the warning alarm sounds continuously and the stop indicator turns red. When the temperature decreases the LCDís move back into the yellow zone and the red warning light goes out and the yellow caution light turns on. If the temperature falls to bar 10 in the green zone the yellow caution light goes out. If the temperature rises back into the yellow zone the caution light turns back on, however, the alarm does not sound. The temperature must fall to bar 9 in the green zone and then increase to the yellow zone again to sound the alarm for three seconds again. The following table lists the relative temperatures for each of the 12 LCD display bars.

Bar number Temperature (°F) Temperature (°C) Indicator color

12 230 110 Red 11 221 105 Yellow 10 212 100 Green 9 203 95 Green 8 194 90 Green 7 185 85 Green 6 176 80 Green 5 158 70 Green 4 140 60 Green 3 104 40 Green 2 68 20 Green 1 <68 <20 Yellow