3.6.
Lubrication & Maintenance Operations
Following 20 hours of operation or daily
1
3.6.1. Check the oil amount in motor •
Stop the engine and wait ca 5 minutes until oil flows down to crankcase sump.
•
Pull out the oil dipstick 1, wipe it off, insert it back down to the stop and pull out again to read the oil level.
•
Maintain the level within the range of the graduation lines stamped on the dipstick. The lower line L (Low) indicates the lowest possible oil level, the upper line H (High) the highest one.
•
Refill the oil via oil filler following a removal of oil filler plug 2. Wait ca 1 minut until the level gets stable and then check again.
2
! CAUTION! The amount of oil between the marks on the dipstick makes 0,95 liters (1.0 U.S Quart).
•
Always replenish with oil of identical type. Use oils under Section 3.2.1.
•
Check the motor tightness, repair any cause of leakage.
•
Inspect the motor if no damaged or missing parts exist within the motor, and whether no appearance changes have occurred.
! CAUTION! NEVER use the engine unless there is proper oil level inside the engine.
82
SV 211
