Maintenance manual Every 2000 Hours or Every 2 Years 1
3.6.27. How to change oil in the vibrator •
Position the cylinder so the drain plug on left side of uncoupled axle 3 is in its lowest position, and on the opposite the filler plug 1 in its highest position.
•
Put a proper receptacle underneath the drain point.
•
Unscrew all the plugs and let oil to flow out.
•
When draining is completed reinstall the drain plug.
•
Use filler hole 1 to refill with recommended oil up to the edge of inspection hole 2 - 8 l (2,1 gal US).
•
Reinstall the remaining plugs.
2
3
! CAUTION! Change oil while oil is hot.
Do NOT touch gearbox or its adjacent sections when these are hot. Observe fire precautions!
Avoid oil to leak into the ground. Used oil is environmentally hazardous waste – Hand it over for disposal.
SV 211
113
