Case 921B Wheel Loader Operators Manual 9-26564 - PDF DOWNLOAD

Page 20

SAFETY/DECALS/HAND SIGNALS

● A fire can cause injury or death. Always Template Name: OM_1_col Template Date: 1994_04_29

have a fire extinguisher near or on the machine. Make sure the fire extinguisher is serviced according to the manufacturers instructions.

protection when you remove or install a starting fluid container. Use starting fluid according to the instructions in this manual. See Cold Weather Starting in this manual.

● Remove all trash or debris from the

● Keep the starting fluid (ether) container

machine. Make sure that oily rags or other flammable materials are not stored on the machine.

out of the reach of children.

● Before you discard an empty starting fluid (ether) container, use rubber gloves and push in on the valve in the end of the container to remove any pressure. DO NOT make a hole in the container and DO NOT put the container in a fire.

● Check for fuel, oil, brake fluid and hydraulic fluid leaks. Replace worn or damaged hoses or lines. After repairs are made, clean the machine before you operate.

● Do not store starting fluid (ether) TRIM THIS EDGE

● If there has been any fuel, oil, brake fluid

containers in the operators area.

or hydraulic fluid leaks within the chassis, remove and inspect the sound panels which may have any fluid on them. If any fluid has penetrated or soaked into the panel the panel must be replaced.

● If you weld, grind, or use a cutting torch on this machine, always remove any starting fluid (ether) container from the machine. Use compressed air to remove any ether fumes from the area.

Alt= to hide template information Alt+ to display template information

● Starting fluid (ether) can explode and can cause injury or death. Do not breathe starting fluid vapors. Wear face

!

WHEELS AND TIRES SAFETY

!

!

WARNING: DO NOT weld to wheel or rim when a tire is installed. Welding will cause an explosive air/gas mixture that will be ignited with high temperatures. This can happen to tires inflated or deflated. Removing air or breaking bead is not adequate. Tire MUST be completely removed from the rim prior to welding. SB134

!

WARNING: Explosive separation of the tire and/or rim parts can cause injury or death. When tire service is necessary, have a qualified tire mechanic service the tire. 84-113 14

TRIM THIS EDGE

LEFT PAGE


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.
Case 921B Wheel Loader Operators Manual 9-26564 - PDF DOWNLOAD by www.heydownloads.com - Issuu