RIDE CONTROL ACCUMULATOR

If the ride control accumulator must be replaced for any reason, always follow the instruction on the decal located on the accumulator mounting plate. Never disconnect the hydraulic line between the accumulator and the solenoid valves without first discharging all hydraulic pressure from the hydraulic system. Always refer to the accumulator decal located at the right, in the safety section of this manual or the decal located on the accumulator mounting plate. Refer to the service manual for complete instructions on testing the accumulator and solenoid.

256318A1

WARNING: The accumulator on this machine contains highly pressurized nitrogen gas. If the accumulator system does not function correctly, replace the accumulator. DO NOT attempt to repair the accumulator, only install a new one. Injury or death can result if you do not follow these instructions.

SA142