1 minute read
STORING THE MACHINE
CONNECTING A BOOSTER BATTERY
WARNING: Connecting auxiliary cables wrongly or short-circuiting battery terminals can cause an accident. Connect auxiliary starting cables as per the following instructions.
WARNING: Whenever carrying out a welding operation on the machine, as authorized by the manufacturer and in accordance with his instructions, or making repairs to the electrical system, disconnect the alternator B+ and D+ wires. Be sure to identify the wires correctly when reconnecting.
Tools required
-Auxiliary starting cables Make sure that the booster battery has the same voltage as that of the machine (12 volts). 1. Connect the positive (+) auxiliary cable to the positive (+) terminal to the machine system. 2. Connect the negative (-) auxiliary cable to the negative (-) terminal of the machine system. 3. Start the engine. 4. Disconnect the negative (-) auxiliary cable, then the positive (+) auxiliary cable from the booster battery.
ALTERNATOR Service specification
Check.........................................................................................Every 1,000 hours
IMPORTANT: Do not use a steam cleaning apparatus or cleaning solvent to clean the alternator. Have the alternator checked by your CASE Dealer. NOTE: Make sure the tag covers are correctly in place.
STARTER MOTOR Service specifications
Check.........................................................................................Every 1,000 hours Have the starter motor checked by your CASE Dealer. NOTE: Make sure the tag covers are correctly in place.
141
TRIM THIS EDGE
RIGHT PAGE TRIM THIS EDGE
