Bobcat 864 & 864 High Flow Loader Operation & Maintenance Manual SN 516911001 & Above - PDF DOWNLOAD

86 4

S/N 516911001 & Above

HIGH FLOW

Dealer Copy -- Not for Resale

86 4

Operation & Maintenance Manual

Doosan purchased Bobcat Company from Ingersoll-Rand Company in 2007. Any reference to Ingersoll-Rand Company or use of trademarks, service marks, logos, or other proprietary identifying marks belonging to Ingersoll-Rand Company in this manual is historical or nominative in nature, and is not meant to suggest a current affiliation between Ingersoll-Rand Company and Bobcat Company or the products of either.

EQUIPPED WITH BOBCAT INTERLOCK CONTROL SYSTEM (BICSTM) 6900626 (9-00) Revised (6-12) 1 of 120

Printed in U.S.A.

© Bobcat Company 2000

2 of 120

Dealer Copy -- Not for Resale

3 of 120

Dealer Copy -- Not for Resale

4 of 120

Dealer Copy -- Not for Resale

CONTENTS

863,863HOperation&MaintenanceManual#6900373–ContentsSection

FOREWORD

FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii .....

SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi. . . .

OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1. . .

PREVENTIVE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 ...

SYSTEM ANALYSIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 ....

MACHINE SIGN TRANSLATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 ...

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 ....

SAFETY

OPERATING INSTRUCTIONS

CALIFORNIA PROPOSITION 65 WARNING

Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects and other reproductive harm.

PREVENTIVE MAINTENANCE

REFERENCE INFORMATION .

SYSTEM ANALYSIS Dealer Copy -- Not for Resale

Write the correct information for YOUR Bobcat loader in the spaces below Always use these numbers when referring to your Bobcat loader.

Loader Serial Number . . . . . . . .

Engine Serial Number . . . . . . . .

MACHINE SIGN TRANSLATIONS

NOTES:

SPECIFICATIONS

YOUR BOBCAT DEALER: ADDRESS: PHONE: Bobcat Company P.O. Box 128 Gwinner, ND 58040–0128 Bobcat Company Europe J. Huysmanslaan 59 B–1651 LOT BELGIUM

5 of 120

i

864, 864H Bobcat Loader Operation & Maintenance Manual

Bobcat Company is ISO 9001 certified ISO 9001 is a set of international standards that control the processes and procedures which we use to design, develop, manufacture, distribute, and service Bobcat products.

British Standards Institute (BSI) is the Certified Registrar Bobcat Company chose to assess the Company’s compliance with the ISO 9001 set of standards. The BSI registration certifies that the two Bobcat Companymanufacturing plants and the Bobcat Company corporate offices (Gwinner, Bismarck & West Fargo) in North Dakota are in compliance with ISO 9001. Only certified assessors, like BSI, can grant registrations. Since registration requires this third–party auditing, it is irrefutable evidence of conformance. Continued certification is subject to periodic audits.

ISO 9001 means that as a company we say what we do and do what we say . In other words, we have established procedures and policies, and we provide evidence that the procedures and policies are followed.

Dealer Copy -- Not for Resale

What does ISO 9001 mean to Bobcat Customers? It means that Bobcat Company produces your Bobcat loader , excavator, and attachments with strict attention to details, using the latest technology and proven techniques.

REGULAR MAINTENANCE ITEMS 6665603

ENGINE OIL FILTER (6 Pack)

6667352

FUEL FILTER

6666375

AIR CLEANER, OUTER

6666376

AIR CLEANER, INNER

6661248

HYDROSTATIC FILTER

6665427

BATTERY

6724094

PROPYLENE GLYCOL ANTI–FREEZE, Premixed – [–34°F (–37°C)]

6724354

PROPYLENE GLYCOL ANTI–FREEZE, Concentrate

6563328

BLACK GOLD Hydraulic/Hydrostatic Fluid – 5 Gallons

6657299

MOTOR OIL 15W40 CD, CF4, CG4 – 1 Quart

6657301

MOTOR OIL 10W30 CD, CF4, CG4 – 1 Quart

6657303

MOTOR OIL 30 CD, CF4, CG4 – 1 Quart

6 of 120

ii

864, 864H Bobcat Loader Operation & Maintenance Manual

FOREWORD

FOREWORD

This Operation & Maintenance Manual was written to give the owner/operator instructions on the safe operation and maintenance of the Bobcat loader. READ AND UNDERSTAND THIS OPERATION & MAINTENANCE MANUAL BEFORE OPERATING YOUR LOADER. If you have any questions, see your Bobcat loader dealer.

SERIAL NUMBER LOCATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v. . .

DELIVERY REPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .v. . .

BOBCAT LOADER IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi. .

Dealer Copy -- Not for Resale

OPTIONS AND ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vii ..

7 of 120

iii

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 8 of 120

iv

864, 864H Bobcat Loader Operation & Maintenance Manual

SERIAL NUMBER LOCATIONS

A

Always use the serial number of the loader when requesting service information or when ordering parts.

Early or later models (identification madeby serial number) may use different parts, or it may be necessary to use a different procedure in doing a specific service operation.

LOADER SERIAL NUMBER The loader serial number plate is located on the outside of the loader frame [A].

Explanation of loader Serial Number: XXXX

XXXXX P–10817

Module 2. – Production Sequence (Series)

B

Module 1. – Model/Engine Combination

2. The five digit Production Sequence Number identifies the order which the loader is produced.

ENGINE SERIAL NUMBER The engine serial number is located on the valve cover at the right side of the engine [B].

P–04602

DELIVERY REPORT

C

The Delivery Report must be filled out by the dealer and signed by the owner or operator when the Bobcat loader is delivered. An explanation of the form must be given to the owner. Make sure it is filled out completely [C].

9 of 120

Dealer Copy -- Not for Resale

1. The four digit Model/Engine Combination Module number identifies the model number and engine combination.

v

864, 864H Bobcat Loader Operation & Maintenance Manual

BOBCAT LOADER IDENTIFICATION ◊ FRONT LIGHTS

OPERATOR SEAT

GRAB HANDLES STEERING LEVER SEAT BELT ◊ REAR AUXILIARY QUICK COUPLERS

TILT CYLINDER

BUCKET

Dealer Copy -- Not for Resale

◊ FRONT AUXILIARY QUICK COUPLERS SAFETY TREAD BUCKET STEPS

OPERATOR CAB (ROPS & FOPS)

◊ REAR WINDOW

SEAT BAR LIFT ARM

REAR GRILL

LIFT ARM SUPPORT DEVICE LIFT CYLINDER ◊ REAR LIGHT ◊ TAIL LIGHT

REAR DOOR * TRACKS

B–15217 B–15218

◊ OPTIONAL OR FIELD ACCESSORY (Not Standard Equipment) BUCKET – Several different buckets and other attachments are available for the Bobcat loader.

ROPS, FOPS – Roll Over Protective Structure, Falling Object Protective Structure, per SAE J1040 and ISO 3471, and Falling Object Protective Structure per SAE J1043 and ISO 3449, Level l. Level ll is available. The Bobcat loader is base–equipped with a standard operator cab as shown. Extra insulated cab is available as an option (Reduced noise level).

10 of 120

vi

864, 864H Bobcat Loader Operation & Maintenance Manual

OPTIONS AND ACCESSORIES Bobcat loader Model 864 is equipped with the following Standard items: Bob–Tach Spark Arrestor Exhaust System (Turbo Charger) Lift Arm Support Device Operator Cab (with ROPS & FOPS Approval) Bobcat Interlock Control System (BICS™) Seat Belt Seat Bar Parking Brake Gauges/Warning Lights Glow Plug Preheat system Operating Lights (Front & Rear) Suspension Seat Front Auxiliary Hydraulics Below is a list of some equipment available as a Factory Installed Option or as a Field Installed Accessory from your Bobcat Loader dealer. See your Bobcat dealer for other available accessories and attachments.

Operator Cab Instrumentation Bobcat Operation Sensing System (BOSS®) . . . . . . . . . . . . . . . . . .

Keyless Start System . . . . . . . . . . . . . . . . .

Opt. Opt. & FA FA Opt. & FA FA FA Opt. & FA FA Opt. FA FA FA FA FA FA FA FA FA

Opt. FA

Hydraulics Rear Auxiliary Hydraulics . . . . . . . . . . . . . .

Hydraulic Bucket Positioning (Includes On/Off Selection) . . . . . . . . . .

Hi Flow Hydraulics . . . . . . . . . . . . . . . . . . . .

Opt. & FA Opt. & FA Opt. & FA

Other

Opt. = Factory Installed Option FA = Field Accessory N/A = Not Available * Includes 1/2 inch Lexan Front Door; 1/4 inch Lexan Top & Rear Windows

Catalytic Exhaust Purifier . . . . . . . . . . . . . .

Engine Heater (Oil Pan) . . . . . . . . . . . . . . .

Single Point Lift or Four Point Lift . . . . . . .

Locking Fuel Cap . . . . . . . . . . . . . . . . . . . . .

Radiator Screen Kit . . . . . . . . . . . . . . . . . . .

Rear Door Bumpers . . . . . . . . . . . . . . . . . .

Tailgate Lock . . . . . . . . . . . . . . . . . . . . . . . .

Tool Box . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Opt. & FA Opt. & FA FA FA FA FA FA FA

Dealer Copy -- Not for Resale

Sound Cab (Reduces Noise at Operator’s Ear) . . . . . . . . . . . . . . . . . . . .

Deluxe Cab . . . . . . . . . . . . . . . . . . . . . . . . . .

Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Back–up Alarm . . . . . . . . . . . . . . . . . . . . . . .

Top Window . . . . . . . . . . . . . . . . . . . . . . . . .

Rear Window . . . . . . . . . . . . . . . . . . . . . . . .

Cab Enclosure and Heater . . . . . . . . . . . . .

Vinyl Cab Enclosure . . . . . . . . . . . . . . . . . .

Hand Control . . . . . . . . . . . . . . . . . . . . . . . .

Cover Kit (Pedals Area) . . . . . . . . . . . . . . .

Cover Kit (Hydraulic Reservoir Area) . . . .

Fire Extinguisher . . . . . . . . . . . . . . . . . . . . .

Flasher Lights . . . . . . . . . . . . . . . . . . . . . . . .

Strobe or Rotating Beacon Light . . . . . . . .

3’’ Seat Belt . . . . . . . . . . . . . . . . . . . . . . . . .

Special Applications Kit* . . . . . . . . . . . . . . .

Rear Window Wiper . . . . . . . . . . . . . . . . . .

Large Operator Seat Bar Kit . . . . . . . . . . .

Specifications subject to change without notice

11 of 120

vii

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 12 of 120

viii

864, 864H Bobcat Loader Operation & Maintenance Manual

SAFETY SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi, . . xii .

FIRE PREVENTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii ....

SAFETY

Dealer Copy -- Not for Resale

MACHINE SIGNS (DECALS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiv, . . . xv

13 of 120

ix

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 14 of 120

x

864, 864H Bobcat Loader Operation & Maintenance Manual

SAFETY INSTRUCTIONS FOR BOBCAT SKID–STEER LOADERS AND ATTACHMENTS SAFETY IS THE OPERATOR’S RESPONSIBILITY All Bobcat loaders and attachments are designed to give maximum safety , but no machine design can prevent operator error or carelessness.

The Bobcat skid–steer loader is highly maneuverable and compact. It is rugged and useful under a wide variety conditions. of This presents an operator with hazards associated with off highway, rough terrain applications, common with Bobcat loader usage.

The Bobcat loader has an internal combustion engine with resultant heat and exhaust. All exhaust gases can kill or cause illness so use the loader with adequate ventilation. The loader has a spark arrestor exhaust system or muf fler which is required for operation in certain areas.

The dealer explains the capabilities and restrictions of the Bobcat loader and attachments for each application. The dealer demonstrates the safe operation according to Bobcat instructional materials, which are also available to operators. The dealer can also identify unsafe modifications or use of unapproved attachments. The attachments and buckets are designed for a Rated Operating Capacity (some have restricted lift heights) and secure fastening to the Bobcat loader . The user must check with the dealer, or Bobcat literature, to determine safe loads of materials of specified densities for the loader–attachment combination.

The following publications and training materials provide information on the safe use and maintenance of the Bobcat loader and attachments:

• The Delivery Report is used to assure that complete instructions have been given to the new owner and that the Bobcat Dealer Copy -- Not for Resale

loader and attachment is in safe operating condition.

• The Operation & Maintenance Manual delivered with the Bobcat loader or attachment gives operating information as well

as routine maintenance and service procedures. It is a part of the machine and can be stored in a container provided inside the cab of the loader. Replacement Operation & Maintenance Manuals can be ordered from your Bobcat dealer.

• Machine signs (decals) instruct on the safe operation and care of your Bobcat loader or attachment. The signs and their locations are shown in the Operation & Maintenance Manual. Replacement signs are available from your Bobcat dealer.

• An Operator’s Handbook is fastened to the operator cab of the loader. Its brief instructions are convenient to the operator.

The Handbook is available from your dealer in an English edition or one of many other languages. See your Bobcat dealer for more information on translated versions.

• The Safety Manual delivered with the Bobcat loader gives general safety information.

• Operator Training Courses are available from your local Bobcat dealer . They provide information for safe and efficient operation of the Bobcat loader and some attachments. The courses are available in English and Spanish versions.

• Service Safety Training Courses are available from your Bobcat dealer . They provide information for safe and correct service procedures.

• See the ADDITIONAL PUBLICATIONS Page in this manual or your Bobcat dealer for Service andParts Manuals, printed materials, videos, or training courses available. Also check the Bobcat web site www.bobcat.com

The dealer and owner/operator review the recommended uses of the product when delivered. If the owner/operator will be using the machine for a different application(s) he must ask the dealer for recommendations on the new use.

Call Before You Dig 1–888–258–0808 When you call, you will be directed to a location in your state/ city for information about buried lines (telephone, cable TV, water, sewer, gas, etc.)

SI01–0400 15 of 120

xi

864, 864H Bobcat Loader Operation & Maintenance Manual

BEFORE OPERATING THE BOBCAT LOADER Safety Alert Symbol This symbol with a warning statement means: “Warning, be alert! Your safety is involved!” Carefully read the message that follows.

Operator must have instructions before running the machine. Untrained operators can cause injury or death.

W–2001–1285

The Bobcat loader and attachment must be in good operating condition before use.

Check all of the items on the Bobcat Service Schedule Decal under the 8–10 hour column or as shown in this Manual.

SAFE OPERATION NEEDS A QUALIFIED OPERATOR *

This notice identifies procedures which must be followed to avoid damage to the machine.

A QUALIFIED OPERATOR MUST DO THE FOLLOWING: • UNDERSTAND THE WRITTEN INSTRUCTIONS, RULES AND REGULATIONS

I–2019–0284

include the Delivery Report, Operation & Maintenance Manual, Operator’s Handbook, Safety Manual and machine signs (decals).

• Check the rules and regulations at your location. The rules may include an employer’s work safety requirements. Regulations may apply to local driving requirements or use of a Slow MovingVehicle (SMV) emblem. Regulations may identify a hazard such as a utility line.

Warnings on the machine and in the manuals are for your safety. Failure to obey warnings can cause injury or death.

W–2044–1285

• HAVE TRAINING WITH ACTUAL OPERATION • Operator training must consist of a demonstration and verbal instruction. This training is given by your Bobcat dealer before the product is delivered.

• The new operator must start in an area without bystanders anduse all the controls until he can operate the machine and attachment safely under all conditions of the work area. Always fasten seat belt before operating.

• Operator Training Courses are available from your Bobcat dealer in English and Spanish. They provide information for safe and efficient equipment operation. Safety videos are also available.

• Service Safety Training Courses are available from your Bobcat dealer. They provide information for safe and correct service procedures.

• KNOW THE WORK CONDITIONS • Know the weight of the materials being handled. Avoid exceeding the Rated Operating Capacity of the machine. Material which is very dense will be heavier than the same volume of less dense material. Reduce the size of load if handling dense material.

• The operator must know any prohibited uses or work areas, for example, he needs to know about excessive slopes.

• Know the location of any underground lines. Call local utilities or the OLL T FREE phone number found in the SAFETY INSTRUCTIONS Section of this manual.

• Wear tight fitting clothing. Always wear safety glasses when doing maintenance or service. Safety glasses, hearing

protection or special applications kit are required for some work.

See your dealer about Bobcat Safety equipment.

* For an operator be qualified, he must not use drugs or alcoholic drinks which impair his alertness or coordination while working. An operator who is taking prescription drugs must get medical advice to determine if he can safely operate a machine.

SI02–0400

16 of 120

xii

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

• The written instructions from Bobcat Company

FIRE PREVENTION The machines and some attachments have components that are at high temperatures under normal operating conditions.

The primary source of high temperatures is the engine and exhaust system. The electrical system, if damaged or incorrectly maintained, can be a source of arcs or sparks.

Flammable debris (leaves, straw, etc.) must be removed regularly. If flammable debris is allowed to accumulate, it can cause a fire hazard. Clean often to avoid this accumulation. Flammable debris in the engine compartment is a potential fire hazard.

The spark arrestor exhaust system (if equipped) is designed to control the emission of hot particles from the engine and exhaust system, but the muffler and the exhaust gases are still hot.

• Do not use the machine where exhaust, arcs, sparks or hot components can contact flammable material, explosive dust or gases.

• The operator cab, engine compartment and engine cooling system must be inspected every day and cleaned if necessary to prevent fire hazards and overheating.

• Check all electrical wiring and connections for damage. Keep the battery terminals clean andtight. Repair or replace any damaged part.

• Check fuel and hydraulic tubes, hoses and fittings for damage and leakage. Never use open flame or bare skin to check for leaks. Tighten or replace any parts that show leakage. Always clean fluid spills. Do not use gasoline or diesel fuel for cleaning parts. Use commercial nonflammable solvents. you or bystanders.

Dealer Copy -- Not for Resale

• Do not use ether or starting fluids on any engine which has glow plugs. These starting aids can cause explosion and injure • Always clean the machine, disconnect the battery, and disconnect the wiring from the electronic controllers before welding.

Cover rubber hoses, battery and all other flammable parts. Keep a fire extinguisher near the machine when welding. Have good ventilation when grinding or welding painted parts. Wear dust mask when grinding painted parts. Toxic dust or gas can be produced.

• Stop the engine and let it cool before adding fuel. No smoking!

• Use the procedure in the Operation & Maintenance Manual for connecting the battery and for jump starting.

• Use the procedure in the Operation & Maintenance Manual for cleaning the spark arrestor muffler (if equipped).

• Know where fire extinguishers and first aid kits are located and howto use them. Fire extinguishers are available from your Bobcat dealer.

SI03–0400

17 of 120

xiii

864, 864H Bobcat Loader Operation & Maintenance Manual

MACHINE SIGNS (DECALS) Follow the instructions on all the machine signs (decals) that are on the loader . Replace any damaged machine signs (decals) and be sure they are in the correct locations. Machine signs (decals) are available from your Bobcat dealer.

6703723 (Foot Pedal) 6703724 (Hand Control) 6727452 (Later Models w/Float button) OPERATION INSTRUCTIONS

6705720

6715940 (Hand Control)

6715944 (Advanced Hand Control only)

OPERATION INSTRUCTIONS FOR LOADERS WITH ADVANCED HAND CONTROLS (AHC)

6708021 (Foot Control) 6708158 (Hand Control)

TO OPERATE LOADER: 1. Fasten seat belt and lower seat bar.

2. Put hand controls in neutral.

3. Start engine.

4. Activate green “PRESS TO OPERATE” button on left instrument panel.

• Both green lights on left hand control must be on.

• If hydraulic functions do not operate, stop engine.

Check that both hand controls are in the neutral position. Re–start engine.

NOTE: Activate “PRESS TO OPERATE” button again if seat bar is raised and lowered or key is turned off.

TO OPERATE LOADER: 1. Fasten seat belt and lower seat bar.

2. Start engine.

3. Activate green “PRESS TO OPERATE” button on left instrument panel.

NOTE: Activate “PRESS TO OPERATE” button again if seat bar is raised and lowered or key is turned off.

See Operation & Maintenance Manual and Handbook for more instructions.

See Operation & Maintenance Manual and Handbook for more instructions.

67176399 (Advanced Hand Control Only)

6717640

6713715

Dealer Copy -- Not for Resale

6577754 (3)

6710449 6703725 (Hand Control) 6557565

6711840

6579510 (Foot Control)

6561383

6717343 (2) Under Cab

6702302

6702301

6579528 * 6710358

* Decal located behind lift arm crossmember.

18 of 120

B–15218

xiv

864, 864H Bobcat Loader Operation & Maintenance Manual

MACHINE SIGNS (DECALS) (Cont’d)

863/864

THIS MODEL LOADER IS FACTORY EQUIPPED WITH A U.S.D.A. FORESTRY SERVICEAPPROVEDSPARKARRESTOREXHAUSTSYSTEM. THE TURBOCHARGER MUST OPERATE TO KEEP THE SPARK ARRESTOR EXHAUSTSYSTEM IN WORKING CONDITION. IF THIS MACHINE IS OPERATED ON FLAMMABLE FOREST, BRUSH OR GRASS COVERED LAND, IT MUST BE EQUIPPED WITH A SPARK ARRESTOR ATTACHED TO THE EXHAUST SYSTEM AND MAINTAINEDIN WORKING ORDER. FAILURE TO DO DO WILL BE IN VIOLATION OF CALIFORNIA STATELAW,SECTION4442.PRC REFER TO LOCAL LAWS AND REGULATIONS FOR SPARK ARRESTOR REQUIREMENTS.

6565990

6578368

SEETHE OPERATION ANDMAINTENANCEMANUALFORMOREINSTRUCTIONS.

SW97 6708937

6708937

6534739 (2)

Dealer Copy -- Not for Resale

6706558

6804114 (2)

6715991 6707867

6718398

* Located inside the engine compartment.

B–15217 19 of 120

xv

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 20 of 120

xvi

864, 864H Bobcat Loader Operation & Maintenance Manual

OPERATING INSTRUCTIONS ATTACHMENTS AND BUCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 ...

Installing The Bucket Or Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 ..

Removing The Bucket Or Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 ..

BOBCAT INTERLOCK CONTROL SYSTEM (BICS™) . . . . . . . . . . . . . . . . . 6.

Auxiliary Hydraulic System (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . 7. .

Lift Arm By–Pass Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7. . .

Traction Lock Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7. . .

BOSS® OPTION PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5. . .

OPERATING INSTRUCTIONS

COMPACT TRACK LOADER OPERATING TIPS . . . . . . . . . . . . . . . . . . . . .29 .

DAILY INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 ....

Daily Inspection And Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 ..

HYDRAULIC CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 ...

Advanced Hand Controls (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ..

Attachment Functions Control (If Equipped) . . . . . . . . . . . . . . . . . . . . . . .17 .

Auxiliary Hydraulics (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 ..

Auxiliary Hydraulics Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ...

Continuous Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 ...

Disengage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 ....

Momentary Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 ...

Bucket Position Valve Operation (If Equipped) . . . . . . . . . . . . . . . . . .12, . 13 Foot Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 ....

Lift Arm Float Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 ...

Lift Arm Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ....

Tilt Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 ....

Hand Controls (Advanced Hand Controls) . . . . . . . . . . . . . . . . . . . . . . . . 13 ..

Lift Arm Float Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ...

Lift Arm Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 ....

Tilt Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ....

Front Auxiliary Hydraulics Continuous Operation . . . . . . . . . . . . . . . . . . .15 .

Front Auxiliary Hydraulics Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 ..

High–Flow Hydraulics Operation (If Equipped) . . . . . . . . . . . . . . . . . . . . .16 .

Rear Auxiliary Hydraulics Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 ..

Relieving Hydraulic Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ...

Secondary Front Auxiliary Hydraulics (If Equipped) . . . . . . . . . . . . . . . . . 16 .

Quick Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ....

Dealer Copy -- Not for Resale

ENGINE SPEED CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8. . .

INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3. . .

With BOSS® (Front Panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. . .

With BOSS® (Side Console) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. . .

Without BOSS® (Front Panel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ...

Without BOSS® (Side Console) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3. .

21 of 120

1

864, 864H Bobcat Loader Operation & Maintenance Manual

OPERATING INSTRUCTIONS (Cont’d) LIFTING THE LOADER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 ...

Four Point Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38 ....

Single Point Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 ....

OPERATING PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 ...

OPERATING PROCEDURE (FOOT PEDALS) . . . . . . . . . . . . . . . . . . . . . . .30 .

Backfilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 ....

Emptying The Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 ...

Digging Into The Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 ...

Filling The Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 ....

Leveling The Ground (Using Lift Arms In Float Position) . . . . . . . . . . . . . .31 OPERATING PROCEDURE (HAND CONTROLS) . . . . . . . . . . . . . . . . . . . .33 .

Backfilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 ....

Emptying The Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 ...

Digging Into The Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 ...

Filling The Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 ....

Leveling The Ground (Using Lift Arms In Float Position) . . . . . . . . . . . . . .34

PARKING THE BOBCAT LOADER . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32, . . 35 PRE–STARTING PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 ...

SEAT BAR RESTRAINT SYSTEM (ADVANCED HAND CONTROLS) . . . . 11 SEAT BAR RESTRAINT SYSTEM (FOOT PEDALS) . . . . . . . . . . . . . . . . . . 10 .

STARTING THE ENGINE (With BOSS®) . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 ..

STARTING THE ENGINE (Without BOSS®) . . . . . . . . . . . . . . . . . . . . . . . . 20 ..

STEERING LEVERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ....

Forward, Reverse, Normal Turn, Fast Turn . . . . . . . . . . . . . . . . . . . . . . . . .9.

STOPPING THE BOBCAT LOADER . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9,. .36 STOPPING THE ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21, . . .23 TOWING THE LOADER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 ...

TRACTION LOCK CONTROL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7. .

TRANSPORTING THE BOBCAT LOADER . . . . . . . . . . . . . . . . . . . . . . . . . 36 ..

22 of 120

2

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

PARKING BRAKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8. . . .

INSTRUMENT PANEL

A

Without BOSS® (Front Panel) [A] 3.

1. TRACTION LOCK OVERRIDE BUTTON (Functions Only When The Seat Bar Is Raised) – Allows you to use the steering levers to move the loader when using the backhoe attachment or for loader service. (See Page 7.)

2. PRESS TO OPERATE BUTTON (Functions Only When The Seat Bar Is Down) – Activates BICS™ System when the Seat Bar is down and operator is seated in the operating position.

3. KEY SWITCH – For starting and stopping the engine.

4. TRANSMISSION WARNING LIGHT – Low transmission charge pressure, hydraulic filter needs replacement or high fluid temperature. Stop the engine if the light comes ON. 5. ENGINE WARNING LIGHT – Low engine oil pressure or high coolant temperature. Stop the engine if the light comes ON. 6. LIGHT SWITCH (Opt./FA) – Controls the available work and travel lights.

7. HIGH–FLOW SWITCH (Opt.) – Controls the ON/OFF function of the high–flow auxiliary hydraulics. (Only on High–Flow loaders.)

8. BUCKET LEVEL SWITCH (Opt./FA) – Controls the ON/OFF function of the available Bucket Position Valve, 9. PREHEAT BUTTON – For preheating the engine (glow plugs) before starting the engine.

10. HOURMETER – Records the total operating hours of the loader.

11. FUEL GAUGE – Shows the amount of fuel in the fuel tank.

12. VOLTMETER – Shows the condition of the battery and the rate of charge.

13. ENGINE TEMPERATURE GAUGE – Shows the engine coolant temperature.

14. AUXILIARY HYDRAULIC SWITCH (Opt./FA) – For engaging the available Auxiliary Hydraulics (front and rear).

Without BOSS

12

9

6 7

10

5

8

11 4 13

3 2

1

14

N–16959

B

P–10466

Side Console 2

3 P–10742

Dealer Copy -- Not for Resale

1

Without BOSS (Side Console*) [B] 1. REAR WIPER/WASHER (FA) – Controls operation of the available rear window wiper and washer.

2. HAZARD SWITCH / HAZARD INDICATORS (Opt./FA) – Controls the available hazard lights.

(Hazard Lights is a separate available accessory .)

Both panel indicators blink for hazard condition when the hazard switch is ON. A red light indicates fuse out for taillights, headlights, worklights, etc.

3. BEACON OR STROBE SWITCH (Opt./FA) – Controls the available flashing beacon or strobe light. *

Available only with Deluxe Cab or with Cab Enclosure Kit. Opt. – Factory Installed Option FA – Field Installed Accessory – See your Bobcat loader dealer about available Field Accessories.

23 of 120

3

864, 864H Bobcat Loader Operation & Maintenance Manual

INSTRUMENT PANEL

A

With BOSS® (Front Panel) [A] 4.

1. TRACTION LOCK OVERRIDE BUTTON (Functions Only When The Seat Bar Is Raised) – Allows you to use the steering levers to move the loader when using the backhoe attachment or for loader service. (See Page 7.)

With BOSS

5 6 7

2. PRESS TO OPERATE BUTTON (Functions Only When The Seat Bar Is Down) – Activates BICS™ System when the Seat Bar is down and operator is seated in the operating position.

4 8

3 1

9

2

3. KEY SWITCH – For starting and stopping the engine.

N–16962

4. BOSS DIAGNOSTIC PORT – Connector for diagnostic tool to make service checks of the system operation unit and other components.

B

Side Console 1

5. LIGHT SWITCH (Opt./FA) – Controls the available work and travel lights.

P–10489

2

7. BUCKET LEVEL SWITCH (Opt./FA) – Controls the ON/OFF function of the available bucket Position Valve.

8. BOSS DISPLAY PANEL – Display panel for BOSS system and functions (See Page 5.)

3 P–10742

9. AUXILIARY HYDRAULIC SWITCH (Opt./FA) – For engaging the available Auxiliary Hydraulics (front and rear).

With BOSS (Side Console*) [B] 1. REAR WIPER/WASHER (FA) – Controls operation of the available rear window wiper and washer.

2. HAZARD SWITCH/HAZARD INDICATORS (Opt./FA) – Controls the available hazard lights.

(Hazard Lights is a separate available accessory .)

Both panel indicators blink for hazard condition when the hazard switch is ON. A red light indicates fuse out for taillights, headlights, worklights, etc.

3. BEACON OR STROBE SWITCH (Opt./FA) – Controls the available flashing beacon or strobe light. *

Available only with Deluxe Cab or with Cab Enclosure Kit. Opt. – Factory Installed Option FA – Field Installed Accessory – See your Bobcat loader dealer about available Field Accessories.

24 of 120

4

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

6. HIGH–FLOW SWITCH (Opt.) – Controls the ON/OFF function of the high–flow auxiliary hydraulics. (Only on High–Flow loaders.)

BOSS® OPTION PANEL 4.

The following items are located on the BOSS Option Display Panel [A] & [(Item 8) [A] Page 4]:

A

25 of 120

1

5

2

4

3

7

6

8

9

12

13

10

11

MC–02320

5

Dealer Copy -- Not for Resale

1. FUEL LEVEL – Shows the amount of fuel in the tank. Flashing pump symbol indicates low fuel level.

H2O symbol is non–functional. (See WARNING SYMBOL) 2. BATTERY VOLTAGE – Shows the condition of the battery and charge rate. It will also indicate a WARNING for high or low voltage (See WARNING SYMBOL).

3. ENGINE OIL PRESSURE – Shows engine oil pressure. Flashing symbol indicates low oil pressure (See WARNING and SHUTDOWN SYMBOL).

4. ENGINE COOLANT TEMPERATURE/LEVEL – Shows engine coolant temperature (See WARNING and SHUTDOWN SYMBOL).

5. SHUTDOWN SYMBOL – This symbol isassociated with any SHUTDOWN condition. When this symbol comes ON the SHUTDOWN will occur in 30 seconds. During SHUTDOWN the buzzer will sound continuously and the symbol will flash until the key switch is turned OFF. NOTE: The engine can be restarted for 30–second periods to move the loader after a SHUTDOWN condition.

6. WARNING SYMBOL – The symbol will be ON when any WARNING or SHUTDOWN is activated. The warning symbol is also used to indicate a W ARNING if there is no related symbol on the display . During a WARNING, the buzzer will beep three times and the symbol will be ON continuously.

7. HOURMETER – Records the total operating hours of the loader. The five character code will display the operating hours to the nearest tenth. When WARNING or SHUTDOWN occurs, an alpha–numeric code will be displayed in the hourmeter area to inform the operator of the problem (See SYSTEM ANALYSIS, Page 79).

During a WARNING or SHUTDOWN the hourmeter symbol is not visible.

8. CHARGE PRESSURE AND FILTER CONDITION – Flashing symbol indicates low fluid charge pressure (See SHUTDOWN SYMBOL). If arrows are ON with gear/drop, it is fluid charge pressure.

This symbol will also indicate a clogged hydraulic fluid filter.

9. AIR FILTER CONDITION – This symbol will indicate a clogged air filter element.

10. GLOW PLUG (Diesel) – The symbol will flash when the glow plugs are energized. The hourmeter will also contain characters GLOXX where XX indicates the remaining time the glow plugs will be ON. Time remaining will count down in 5 second increments.

11. ENGINE SPEED – This symbol will indicate an engine overspeed (See WARNING and SHUTDOWN SYMBOL).

LIGHT 12. PARKING BRAKE INDICATOR (Non–Functional) .

13. HYDRAULIC FLUID TEMPERATURE – This symbol will indicate a high fluid temperature. (See WARNING or SHUTDOWN SYMBOL above).

864, 864H Bobcat Loader Operation & Maintenance Manual

BOBCAT INTERLOCK CONTROL SYSTEM (BICS™)

A

The Bobcat Interlock Control System (BICS™) requires the operator to be seated in the operating position with the Seat Bar fully lowered and the green PRESS TO OPERATE Button (Item 1) [B] activated before the lift, tilt and traction functions can be operated. The Seat Belt must be fastened anytime you operate the loader.

1 2 3 4

NOTE: Press the green PRESS TO OPERATE Button [B] again if Seat Bar is raised and lowered or key is turned off.

5

N–17979

B

AVOID INJURY OR DEATH The Bobcat Interlock Control System (BICS) must deactivate the lift, tilt and traction drive functions. If it does not, contact your dealer for service. DO NOT modify the system.

The lift, tilt and traction drive functions are interlocked with the Seat Bar.

PRESS TO OPERATE

1

The BICS Controller is located inside the cab; behind and to the right of the operator’s seat [A].

N–16884

There are five green lights on the BICS Controller and all must be ON to operate the loader.

The light functions are as follows [A]: 1. SYSTEM ACTIVATED – ON when the green PRESS TO OPERATE Button is activated.

2. SEAT BAR – ON when the seat bar is in position.

down

3. VALVE – ON when lift and tilt hydraulic functions can be used.

4. TRACTION* – ON when engine is running, then loader can be moved forward or backward.

5. POWER – ON when the Controller is correctly.

operating

NOTE: If any of the lights are off or blinking, see SERVICE CODES Page 79, BICS Troubleshooting Chart, Page 81, or see BICS Inspection and Maintenance Instructions Page 49.

*

The TRACTION light will come ON when the engine is running.

26 of 120

6

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

W–2151–0394

BOBCAT INTERLOCK CONTROL SYSTEM (BICS™) (Cont’d)

A

Lift Arm By–Pass Control The lift arm by–pass control knob (Item 1) [A] is used to lower the lift arms if the lift arms can not be loweredduring normal operation.

With the operator in the seat, seat belt fastened and the seat bar fully lowered, turn the lift arm by–pass control knob (Item 1) [A] clockwise 1/4 turn. Then, pull up and hold the lift arm by–pass control until the lift arms slowly lower.

1

Traction Lock Override 6.

(Functions Only When The Seat Bar Is Raised) There is a Traction Lock Override button (Item 1)[B] on the left hand instrument panel which will allow you to use the steering levers to move the loader forward & backward when using the backhoe attachment or for loader service.

P–09707

B

• Press the button once to unlock traction drive (green traction light on BICS Controller will be ON).

NOTE: The Traction Lock Override button will unlock the traction drive when the operator is NOT in the seat and the seat bar is raised.

1

The Traction Lock Override button will function if brake pedal is in the engaged or disengaged position.

N–18290

Auxiliary Hydraulic System (If Equipped)

C

When the operator is seated and raises the seat bar , the Auxiliary Hydraulic System will deactivate. Press the Auxiliary Hydraulics Switch (Item 1) [C] to reselect operating mode. (See Auxiliary Hydraulics Page 14.)

Without BOSS

With BOSS

TRACTION LOCK CONTROL SYSTEM The Traction Lock Control System will lock the traction drive system when the engine stops.

1

Dealer Copy -- Not for Resale

• Press the button a second time to lock the traction drive (green traction light on BICS Controller will be OFF).

1

NOTE: When the Traction Lock Override button is activated, the Traction Lock Control System will NOT engage the Traction Lock if the engine stops.

The Traction Lock Control System is incorporated into the BICS system. See Inspecting The Traction Lock Control System Page 50.

P–10466

P–10489

NOTE: The traction light on the BICS controller will remain OFF until the engine is started and if the parking brake is disengaged.

27 of 120

7

864, 864H Bobcat Loader Operation & Maintenance Manual

ENGINE SPEED CONTROL

A

The speed control lever (Item 1) [A] is at the right side of the operator’s seat.

Change the engine speed by moving the lever forward to increase the engine RPM and backward to decrease the engine RPM.

1

N–17980

PARKING BRAKE

B

Engage the parking brake by pushing on the top of the pedal [B]. The traction drive system will be locked. (See Traction Lock Override, Page 7.)

P–03990

C

To release the parking brake, push on the bottom of the pedal [C].

Parking Brake Solenoid

MC–01914

The parking brake solenoid is located under the steering panel [D]. Under normal conditions there is no need to service the solenoid. If service work is performed, check the solenoid.

P–03989

Be sure the parking brake solenoid valve is engaged before operating the loader.

D

To manually engage the parking brake solenoid valve, push IN on the red Traction Lock By–Pass Knob (Item 1) [D] and turn it 1/4 TURN clockwise to the engaged position.

1

Unexpected loader movement.

Can cause serious injury or death.

Push in and turn red Traction Lock By–Pass Knob clockwise to engaged position before operating loader.

Read Operation instructions.

&

28 of 120

Maintenance

Manual

for more 6803932

N–18674

8

P–09707

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

MC–01914

STEERING LEVERS

A 1

AVOID INJURY OR DEATH When operating the machine: • Keep the seat belt fastened snugly.

• The seat bar must be lowered.

• Keep your feet on the pedal controls or footrests.

W–2261–0397

P–05086

The steering levers (Item 1)[A] are on the right and left side in front of the seat (foot pedal loader shown).

B

Move the levers smoothly . Avoid sudden starting and stopping.

FORWARD

REVERSE

Forward Travel – Push both levers forward.

Reverse Travel – Pull both levers backward.

Normal Turning – Move one lever farther forward than the other.

Fast Turning – Push one lever forward and pull the other lever backward.

For slow travel speed, push the steering levers forward only a small amount.

LEFT TURN

RIGHT TURN

LEFT FAST TURN

RIGHT FAST TURN

To increase travel speed, push both levers farther forward.

For maximum pushing force, push the levers forward only a small amount with the engine at full RPM.

Dealer Copy -- Not for Resale

The steering levers control forward and reverse travel and turning of the loader [B].

STOPPING THE BOBCAT LOADER Move the steering levers to the NEUTRAL POSITION.The hydrostatic transmission will act as a service brake to stop the loader.

PI–01849

29 of 120

9

864, 864H Bobcat Loader Operation & Maintenance Manual

SEAT BAR RESTRAINT SYSTEM (FOOT PEDALS)

A

The seat bar restraint system has a pivoting, spring assist seat bar (Item 1) [A] with arm rests and has spring loaded interlocks for the lift and tilt control pedals.

1

The operator controls the use of the seat bar. The seat bar in the down position helps to keep the operator in the seat.

The interlocks require the operator to lower the seat bar in order to operate the foot pedal controls.

When the seat bar is up, the lift and tilt control pedals are locked when returned to the NEUTRAL POSITION .

AVOID INJURY OR DEATH

P–07638

B

SEAT BAR DOWN

W–2046–0595

2

Before you leave the operator’s seat: • Lower the lift arms, put the attachment flat on the ground.

• Stop the engine.

• Engage the parking brake.

• Raise seat bar, move pedals until both lock.

Seat Bar

1 Interlock

W–2045–1086

Pedal Linkage

The seat bar system must lock the lift and tilt control pedals in neutral when the seat bar is up. Service the system if pedals do not lock correctly.

3

W–2105–1285

Interlock Shield

The spring loaded interlocks (Item 1)[B] control the locking and unlocking functions of the Foot Pedal controls.

MC–01668

The interlocks (Item 1) [B] require the operator to lower the seat bar (Item 2) [B] which allows the operator to move the foot pedals to control the lift and tilt functions.

C

When the seat bar is lowered, it pushes the interlock (Item 1) [B] down on both sides, releasing the pedal linkages (Item 3) [B] from the interlocks.

SEAT BAR RAISED Seat Bar

The pedals will pivot in both directions when the interlock is down.

When the seat bar is raised, spring forces raise the interlocks [C].

Interlock

The foot pedals will not pivot when the interlock is up.

See SEAT BAR RESTRAINT SYSTEM Inspection & Maintenance, Page 47.

Interlock Shield

MC–01668 30 of 120

10

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

When operating the machine: • Keep the seat belt fastened snugly.

• The seat bar must be lowered.

• Keep your feet on the pedal controls.

SEAT BAR RESTRAINT SYSTEM (ADVANCED HAND CONTROLS)

A

The seat bar restraint system has a pivoting seat bar (Item 1) [A] with arm rests.

The operator controls the use of the seat bar. The seat bar in the down position helps to keep the operator in the seat.

1

When the seat bar is down, and the green PRESS TO OPERATE Button is activated, the lift, tilt, and traction drive functions can be operated.

When the seat bar is up, the lift, tilt, and traction drive functions are deactivated.

P–13721

AVOID INJURY OR DEATH

Dealer Copy -- Not for Resale

When operating the machine: • Keep the seat belt fastened snugly.

• The seat bar must be lowered.

• Keep your feet on the foot rests.

W–2179–0694

Before you leave the operator’s seat: • Lower the lift arms, put the attachment flat on the ground.

• Stop the engine.

• Engage the parking brake.

• Raise seat bar.

• Move the hand controls to the NEUTRAL POSITION to make sure that both lift and tilt functions are deactivated.

The seat bar system must deactivate the lift and tilt control functions when the seat bar is up.

Service the system if hand controls do not deactivate.

W–2302–0698

See SEAT BAR RESTRAINT SYSTEM Inspection & Maintenance, Page 48.

31 of 120

11

864, 864H Bobcat Loader Operation & Maintenance Manual

HYDRAULIC CONTROLS

A

Foot Pedals

3

2 P–05085

1 Keep both feet on pedals while operating machine. Failure to do so can cause serious injury.

W–2002–1285 Put your feet on the pedals and KEEP THEM THERE any time you operate the loader.

Two foot pedals (Item 1) [A] control the hydraulic cylinders for the lift and tilt functions.

Lift Arm Operation

Push on the top (toe) (Item 3) [A] of the pedal to lower the lift arms.

4

Lift Arm Float Position

1

5

Push the top (toe) (Item 3) [A] of the pedal all the way forward until it locks into the float position.

P–05085

Use the float position of the lift arms to level loose material while driving backward.

Push the bottom (heel) of the lift pedal to unlock from the float position.

Tilt Operation The right pedal controls the action of the bucket. Push the top (toe) (Item 4) [A] of the pedal to tilt the bucket forward.

Push the bottom of the pedal (heel) (Item 5) [A] to tilt the bucket backward.

B–15262

Bucket Position Valve Operation (If Equipped) The function of the bucket position valve is to keep the bucket in the same approximate position it is placed in, prior to the upward lift cycle.

Bucket positioning functions automatically during the upward lift cycle only.

The bucket positioning function (if equipped) can be turned OFF with the bucket level switch. (See Pages 3 & 4.)

32 of 120

12

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

B–15261

The left pedal controls the lift arms. Push on the bottom (heel) (Item 2) [A] of the pedal to raise the lift arms.

HYDRAULIC CONTROLS (Cont’d)

A

Advanced Hand Controls

1 5

2

Keep both feet on footrests while operating machine. Failure to do so can cause serious injury.

B–15781

W–2152–0594

Put your feet on the footrests and KEEP THEM THERE for comfort and safety any time you operate the loader.

Two hand levers [A] control the hydraulic cylinders for the lift and tilt functions.

Lift Arm Operation The left hand lever controls the lift arms.

Move the left hand lever away (Item 1) [A] from the operator to raisethe lift arms.

Move the left hand lever toward (Item 2) [A] the operator to lower the lift arms.

Lift Arm Float Position Move the left hand lever all the way toward the operator (Item 2) [A] until it locks into the float position.

3 4

Later AHC Models With Float Button – Press anbd hold the Float Button (Item 5) [C] before moving the lever.

– Press again to disengage.

B–15781

Use the float position of the lift arms to level loose material while driving backward.

Dealer Copy -- Not for Resale

B–15261

Move the left hand lever upward to unlock from the float position.

Tilt Operation The right hand lever controls the action of the bucket.

Move the right hand lever away (Item 3) [A] from the operator to tilt the bucket forward.

B–15262

B

Move the right hand lever toward (Item 4) [A] the operator to tilt the bucket backward.

Two lights (Item 1) [B] on the left handle are always ON when the Advanced Hand Control is functioning correctly. If lights are blinking or do not come ON, see Advanced Hand Controls Troubleshooting Chart Page 81.

Bucket Position Valve Operation (If Equipped) The function of the bucket positioning valve is to keep the bucket in the same approximate position it is placed in before beginning the upward lift cycle.

1

Bucket positioning functions automatically during the upward lift cycle only.

The bucket positioning function (if equipped) can be turned OFF with the bucket level switch. (See Page 3 and 4).

33 of 120

Left Steering Lever 13

P–13255

864, 864H Bobcat Loader Operation & Maintenance Manual

HYDRAULIC CONTROLS (Cont’d) 7.

Auxiliary Hydraulics

A

AVOID BURNS Hydraulic fluid, tubes, fittings and quick couplers can get hot when running machine and attachments. Be careful when connecting and disconnecting quick couplers.

N–18001

W–2220–0396

NOTE: The loader has auxiliary proportional control for front auxiliary hydraulics only.

Proportional control allows for slow–to–fast movement of auxiliary functions. EXAMPLE: If you move the auxiliary switch half way, the auxiliary function will move at approximately one–half speed.

B

Locked 1

2

To Connect: Remove any dirt or debris from the surface of both the male and female couplers, and from the outside diameter of the male coupler . Visually check the couplers for corroding, cracking, damage, or excessive wear. If any of these conditions exist, the coupler(s) must be replaced [A].

3

Install the male half coupler into the female coupler .

Full connection is made when the ball release sleeve slides forward on the female coupler and the sleeve is rotated so that the locking pins (Item 1) [B] and the groove (Item 2) [B] do NOT align (Locked Position).

This will prevent accidental disconnection.

N–18002

NOTE: If the locking pins and grooves (Item 3) [B] are aligned, accidental disconnection is possible.

To Disconnect: Rotate the ball release sleeve so that the grooves are aligned with the pins (Item 3) [B] in the female coupler.

Hold the male coupler. Retract the sleeve on the female coupler until the couplers disconnect.

NOTE: Caps and plugs are not used with flush face couplers.

Relieving Hydraulic Pressure 8.

With the engine running, turn the key switch quickly to the left (counterclockwise) past the OFF position. Hold key for at least five seconds after the engine comes to a complete stop. This relieves pressure that can be trapped in the auxiliary circuit which would make it dif ficult to engage quick couplers from an attachment.

34 of 120

14

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Quick Couplers

A

Auxiliary Hydraulics (Cont’d)

With BOSS

Without BOSS

Auxiliary Hydraulics Switch 9.

• Momentary Operation Press the Auxiliary Hydraulics Switch (Item 1) [A] once.

1

1

The light (Item 2) [A] will be ON. • Continuous Operation Press the Auxiliary Hydraulics Switch (Item 1) [A] a second time.

Both lights (Items 2 & 3) [A] will be ON.

2

2

3

3 P–10466

• Disengage

Press the Auxiliary Hydraulics Switch (Item 1) [A] a third time.

B

Both lights (Items 2 & 3) [A] will be OFF. NOTE: When the operator is seated and raises the seat bar, the Auxiliary Hydraulic System (Front and Rear) will deactivate. Press the Auxiliary Hydraulics Switch (Item 1) [A] to reselect operating mode.

P–10489

TWO–SWITCH HANDLES

3

1

FRONT Auxiliary Hydraulics Operation (RIGHT Steering Lever)

2

• Set the Auxiliary Hydraulics Switch for Momentary Operation (See above).

Left Steering Lever

• Push the switch (Item 1) [B] or [C] to the right or left to

Right Steering Lever

P–02154

change the fluid flow direction to the front quick couplers. (EXAMPLE: Open and close grapple teeth.)

C

FRONT Auxiliary Hydraulics Continuous Operation (RIGHT Steering Lever)

3

P–02152

DELUXE HANDLES

1

• Set the Auxiliary Hydraulics Switch for Continuous Operation (See above).

• Push the front switch (Item 2) [B] or [C] to give the front quick couplers a constant flow of (EXAMPLE: Operate a backhoe.)

Dealer Copy -- Not for Resale

HYDRAULIC CONTROLS (Cont’d)

fluid

• To release from continuous operation, press the front switch (Item 2) [B] or [C] a second time.

2

REAR Auxiliary Hydraulics Operation (LEFT Steering Lever)

Left Steering Lever

• Set the Auxiliary Hydraulics Switch for Momentary or

Right Steering Lever

P–13255

P–13254

Continuous Operation (See above).

• Push the switch (Item 3) [B] or [C] to the right or left to

D

change the fluid flow direction to the rear quick couplers [D]. (EXAMPLE: Raise and lower rear stabilizers.) This switch also controls the secondary front auxiliary. (Rear Auxiliary Hydraulics required)

NOTE: See System Analysis Page 80 troubleshooting malfunctions with Auxiliary Hydraulics Operation.

REAR AUXILIARY QUICK COUPLERS

for the

NOTE: The secondary front auxiliary hydraulics and the rear auxiliary hydraulics operate from the same auxiliary section of the control valve. To operate only one of these auxiliary functions, disconnect the other.

N–18000 35 of 120

15

864, 864H Bobcat Loader Operation & Maintenance Manual

HYDRAULIC CONTROLS (Cont’d)

A

Auxiliary Hydraulics (Cont’d.)

HI FLOW

High–Flow Hydraulics Operation (If Equipped)

SECONDARY COUPLERS 1

The High–Flow function provides additional flow to the system to operate an attachment which requires more hydraulic flow (EXAMPLE: Planer).

• Set the Auxiliary Hydraulics Switch for Momentary or Continuous Operation (See Page 15.)

• Be sure Hi–Flow switch is OFF • Connect the attachment to the quick couplers (Item 1)

3 2

[A].

N–18001

• Some attachments may have a case drain which

needs to be the connected to the small quick coupler (Item 2) [A].

B

• When all hydraulic connections have been made, turn

Without BOSS

N–17975

With BOSS

the Hi–Flow switch ON (Item 1) [B] (amber light is ON).

The secondary front auxiliary quick couplers are a part of the Hi–Flow Hydraulics (factory option)[A]. (Also available as a Field Installed Accessory.) These are used when there is a need for additional auxiliary hydraulics (EXAMPLE: Planer side shift).

1

1

• Connect the attachment to the secondary auxiliary hydraulics (Item 3) [A].

• Set the Auxiliary Hydraulic Switch for Momentary or

N–18120

Continuous Operation. (See Page 15.)

• Push switch (Item 1) [C] to the right or left to change fluid flow direction. (EXAMPLE: Side shift on the Planer.)

C

1

N–18121

DELUXE HANDLES

NOTE: The secondary front auxiliary hydraulics and the rear auxiliary hydraulics operate from the same auxiliary section of the control valve. To operate only one of these auxiliary functions, disconnect the other.

If the high–flow switch is in the ON position, High–Flow Hydraulics will flow through the front auxiliary quick couplers. Damage to unapproved attachments can result. Leave the switch OFF for backhoe operation.

Left Steering Lever P–13255

Right Steering Lever P–13254

I–2063–0295

36 of 120

16

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Secondary Front Auxiliary Hydraulics (If Equipped)

HYDRAULIC CONTROLS (Cont’d.)

A

Attachment Functions Control (If Equipped) (Attachment Control Kit Required) (Item 1) [A]

1

This kit, when installed, allows the use of other switches on the right and left control handles (Deluxe Handles) for functions such as water spray , left/right turn signals (Europe only), raise/lower the left/right ends of the moldboard on a Grader, etc.

The following are examples only , consult Attachment Operation & Maintenance Manual.

Switch (Item 2) [B] Left Moldboard Up/Down Switch (Item 1) [B] Left/Right Turn Signals Switch (Item 3) [B] Right Moldboard Up/Down Switch (Item 4) [B] Water Spray

N–18001

1

DELUXE HANDLES 2

Maintenance work must be done at regular intervals.

Failure to do so will result in excessive wear and early failures. The Service Schedule [C] is a guide for correct maintenance of the Bobcat loader. It is located inside the rear door of the loader and also in the MACHINE SIGN TRANSLATION Section Page 83.

4

3

Daily Inspection and Maintenance:

• Engine Oil Level • Hydraulic/Hydrostatic Fluid Level • Engine Air Filter, Air System for Damage or Leaks • Engine Coolant Level, System for Damage or Leaks • Operator Cab, Seat Belt, Seat Bar , Pedal Interlocks,

Left Steering Lever

• Grease Pivot Pins (Lift Arms, Bob–Tach, Cylinders,

C

P–13255

Mounting Hardware

Bob–Tach Wedges • Fuel Filter, Remove Trapped Water • Loose or Broken Parts • Safety Treads and Safety Signs (Decals) • Bobcat Interlock Control System (BICS™) • Lift Arm Support Device • Tracks for Wear or Damage and Correct Tension

NOTE: Fluids such as engine oil, hydraulic fluid, coolant, etc. must be disposed of in an environmentally safe manner.

Some regulations require that certain spills and leaks on the ground must be cleaned in a specific manner. See local, state and federal regulations for correct disposal.

Right Steering Lever P–13254

Dealer Copy -- Not for Resale

B

DAILY INSPECTION

6718398

Diesel fuel or hydraulic fluid under pressure can penetrate skin or eyes, causing serious injury or death. Fluid leaks under pressure may not be visible. Use a piece or cardboard or wood to find leaks. Do not use your bare hand.

Wear safety goggles. If fluid enters skin or eyes, get immediate medical attention from a physician familiar with this injury.

W–2072–0496

37 of 120

17

864, 864H Bobcat Loader Operation & Maintenance Manual

PRE–STARTING PROCEDURE 10.

Read and understand the Operation & Maintenance Manual and the Operator’s Handbook (Item 1) [A] before operating the loader.

A 1

The Operation & Maintenance Manual and other manuals can be kept in a container [A] behind the operator seat.

2

P–10159

Instructions are necessary before operating or servicing machine. Read and understand the Operation & Maintenance Manual, Handbook and signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing.

Check for correct function after adjustments, repairs or service. Failure to follow instructions can cause injury or death.

B

Dealer Copy -- Not for Resale

W–2003–1298

Use the bucket or attachment steps, grab handles and safety treads (on top of the loader lift arms and frame) to get on and off the loader [B]. Do not jump.

Safety treads are installed on the Bobcat loader toprovide a slip resistant surface for getting on and off the loader.

Keep safety treads clean and replace when damaged.

Replacement treads are available from your Bobcatloader dealer.

N–17985

Release the seat lever (Item 1) [C] and adjust the seat position for comfortable operation of the loader controls.

C

1 P–10163 38 of 120

18

864, 864H Bobcat Loader Operation & Maintenance Manual

PRE–STARTING PROCEDURE (Cont’d.)

A

Fasten the seat belt snugly and adjust it so that the buckle is centered between your hips [A].

AVOID INJURY OR DEATH When operating the machine: • Keep the seat belt fastened snugly.

• The seat bar must be lowered.

• Keep your feet on the pedal controls or footrests.

P–07637

W–2261–0397

B

P–07639

C

Engage the parking brake (Item 1) [C].

2

Put the foot pedals (Item 2) [C] or hand controls (Item 3) [C] in neutral position.

1

P–05086

NOTE: Keep your hands on the steering levers and feet on the foot pedals (or foot rests) while operating the loader [D].

3

Dealer Copy -- Not for Resale

Lower the seat bar [B].

P–13721

D

P–07638 39 of 120

19

864, 864H Bobcat Loader Operation & Maintenance Manual

STARTING THE ENGINE (Without BOSS®)

A

WRONG

WRONG

B–03724 B–15502

B–15260

When an engine is running in an enclosed area, fresh air must be added to avoid concentration of exhaust fumes. If the engine is stationary, vent the exhaust outside.

Exhaust fumes contain odorless, invisible gases which can kill without warning [A].

W–2050–1285

AVOID INJURY OR DEATH • Engines can have hot parts and hot exhaust gas. Keep flammable material away.

B

• Do not use machines in atmosphere containing explosive gas [A].

W–2051–1086

Set the engine speed control to the 1/2speed position [B].

Turn the key switch to RUN. The engine and transmission warning lights (Item 1) [C] will be ON. Preheat: If the temperature is below what is indicated on the decal [D] inside operator cab, press and hold the preheat switch (Item 2) [C] the time indicated on the decal.

P–02145

Turn the key switch to START [C]. Release the key when the engine starts. It will return to the RUN position [C].

C

Advanced Hand Controls Only: Make sure both hand controls are in neutral before starting the engine.

Do not move the Advanced Hand Control levers from the neutral position when turning the key ON.

OFF

RUN

If either hand control is moved: START

a. – The neutral position for the hydraulic valve spool and hand control may not be correctly calibrated. This can result in movement of the lift or tilt hydraulic cylinders when the hand control lever is returned to the neutral position after start– up.

2 1

P–18120

OR

D

b. – The hydraulics will not operate (corresponding diagnostic lights on the left handle will blink).

If either condition occurs, turn the key OFF. Put the controls in neutral position and re–start the engine.

IF THE WARNING LIGHTS (Item 1) [C] DO NOT GO OFF TURN THE KEY SWITCH TO THE OFF POSITION. After the engine is running, slowly move the engine speed control forward to increase engine RPM.

6708942 40 of 120

20

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Perform the PRE–STARTING PROCEDURE Page 18.

STARTING THE ENGINE (Without BOSS®) (Cont’d)

A

If the starting temperature is below freezing, perform the following to make starting the engine easier:

• Replace the engine oil with the correct type and

viscosity for the anticipated starting temperature.

(See Engine Lubrication System Page 61.)

• Make sure the battery is fully charged.

• Install an engine heater, available from your Bobcat loader dealer.

OFF

RUN START

In cold conditions, it may take up to 60 seconds of cranking to reach the engine speed required to keep it running by itself. The cranking can continue only if you know that the engine is firing.

2 1

P–18120

Check the exhaust and listen to the sound of the engine.

If the engine is firing, there will be smoke from the exhaust and the cranking speed will continue to increase.

B

STOPPING THE ENGINE Pull the engine speed control [B] fully backward to decrease the engine speed. Turn the key switch OFF [A].

P–02145

When the temperature is below –20°F (–30°C), hydrostatic oil must be warmed before operating. The hydrostatic system will not get enough oil at low temperatures and will be damaged.

Dealer Copy -- Not for Resale

Do not continue to crank if the engine does not fire within the first 15 seconds of cranking. This extended cranking time must only be done if the engine speed is increasing because the engine is firing and aiding the starter.

Let the engine run for 5 to 10 minutes to warm the engine and hydrostatic transmission fluid before operating. If the transmission warning light comes ON when you begin operating the machine (cold), more warm up time is needed.

(This could also mean that the fluid level is low.

Be sure the fluid level is at the full mark on the dipstick.)

Park the machine in an area where the temperature will be above 0°F (–18°C) if possible.

I–2192–0399

41 of 120

21

864, 864H Bobcat Loader Operation & Maintenance Manual

STARTING THE ENGINE (With BOSS™)

A

WRONG

WRONG

B–03724

B–06578

When an engine is running in an enclosed area, fresh air must be added to avoid concentration of exhaust fumes. If the engine is stationary, vent the exhaust outside.

Exhaust fumes contain odorless, invisible gases which can kill without warning [A].

W–2050–1285

AVOID INJURY OR DEATH • Engines can have hot parts and hot exhaust gas. Keep flammable material away.

B

• Do not use machines in atmosphere containing explosive gas [A].

W–2051–1086

Set the engine speed control to 1/2 speed position [B].

P–02145

Turn the key switch to RUN [C], one beep will sound and the display symbols [D] will be ON. If there are SERVICE CODES on the display (Item 2) [D], see SYSTEMS ANALYSIS Section Page 77.

C OFF RUN START

N–18121

Preheat: If the engine is cold, the preheat will automatically begin, the glow plug symbol (Item 1)[D] will be ON and the display (Item 2) [D] will show GLOXX. XX will countdown the remaining time the glow plugs will be energized.

D

Wait for the glow plugs to count down to zero.

1

2

Do not use ether with glow plug (preheat) systems. Explosion can result which can cause injury or death.

W–2071–1285

P–10486 42 of 120

22

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Perform the PRE–STARTING PROCEDURE Page 18.

STARTING THE ENGINE (With BOSS™) (Cont’d)

A

Turn the key switch to START [A]. Release the key when the engine starts. It will return to the RUN position [A].

If the engine does not start, turn the key switch OFF and to RUN again [A]. This will start the glow plug cycle again.

OFF RUN

When the engine is running, slowly move the engine speed control forward to increase the engine speed.

START

Advanced Hand Controls Only: Make sure both hand controls are in neutral before starting the engine.

Do not move the Advanced Hand Control levers from the neutral position when turning the key ON. N–18121

If either hand control is moved:

When the temperature is below –20°F (–30°C), hydrostatic oil must be warmed before operating. The hydrostatic system will not get enough oil at low temperatures and will be damaged.

OR b. – The hydraulics will not operate (corresponding diagnostic lights on the left handle will blink).

Let the engine run for 5 to 10 minutes to warm the engine and hydrostatic transmission fluid before operating. If the transmission warning light comes ON when you begin operating the machine (cold), more warm up time is needed.

(This could also mean that the fluid level is low.

Be sure the fluid level is at the full mark on the dipstick.)

If either condition occurs, turn the key OFF. Put the controls in neutral position and re–start the engine.

If the starting temperature is below freezing, perform the following to make starting the engine easier: • Replace the engine oil with the correct type and viscosity for the anticipated starting temperature.

(See Engine Lubrication System Page 61.)

• Make sure the battery is fully charged.

• Install an engine heater, available from your Bobcat loader dealer.

Park the machine in an area where the temperature will be above 0°F (–18°C) if possible.

I–2192–0399

In cold conditions, it may take up to 60 seconds of cranking to reach the engine speed required to keep it running by itself. The cranking can continue (up to 60 seconds) only if you know that the engine is firing.

Dealer Copy -- Not for Resale

a. – The neutral position for the hydraulic valve spool and hand control may not be correctly calibrated. This can result in movement of the lift or tilt hydraulic cylinders when the hand control lever is returned to the neutral position. after start– up

B

Check the exhaust and listen to the sound of the engine.

If the engine is firing, there will be smoke from the exhaust and the cranking speed will continue to increase.

Do not continue to crank if the engine does not fire within the first 15 seconds of cranking. This extended cranking time must only be done if the engine speed is increasing because the engine is firing and aiding the starter.

Let the engine run for a minimum of 5 minutes to warm the engine and hydrostatic transmission fluid before operating the loader. If the transmission warning light comes ON when you begin operating the loader (cold), more warm up time is needed. (This could also mean that the fluid level is low. Be sure the fluid level is at the full mark on the dipstick.)

P–02145

STOPPING THE ENGINE Pull the engine speed control [B] fully backward to decrease the engine speed. Turn the key switch OFF [A].

43 of 120

23

864, 864H Bobcat Loader Operation & Maintenance Manual

ATTACHMENTS AND BUCKETS

A

NOTE: Warranty is void if non–approved attachments are used on the Bobcat loader.

Never use attachments or buckets which are not approved by Bobcat Company. Buckets and attachments for safe loads of specified densities are approved for each model.

Unapproved attachments can cause injury or death.

W–2052–1285

B–15259

The dealer can identify , for each model loader, the attachments and buckets approved by Bobcat Company .

The buckets and attachments are approved for rated operating capacity and for secure fastening to the Bob–Tach.

The rated operating capacity for this loader is shown on a label in the operator cab. (See SPECIFICATIONS Section Page 93.)

The rated operating capacity is determined by using a standard dirt bucket, and material of normal density, such as dirt or dry gravel. If longer buckets are used, the load center moves forward and reduces the rated operating capacity. If very dense material is loaded, the volume must be reduced.

W–2053–0887

WEIGHT OF LOADS LBS. (KG)

1955(887)

• Steering the loader may be difficult.

• Tracks will wear faster.

• There will be a loss of stability.

• The life of the Bobcat loader will be reduced.

Use the correct size bucket for the type and density of material being handled. For safe handling of materials and avoiding machine damage, the attachment (or bucket) should handle a full load without going over the rated operating capacity for the loader . Partial loads make steering more difficult.

Maximum load to be carried when using a pallet fork are shown in figure [B]. See your Bobcat loader dealer for more information about loader counterweights, pallet forks and other available attachments.

1710(776)

B

Exceeding the rated operating capacity [A] can cause the following problems:

15.75 (400)

24.00 (610)

CENTER OF LOAD LOCATION Inches (mm) 6712931 6712932

44 of 120

24

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

AVOID INJURY OR DEATH Do not exceed rated operating capacity.

Excessive load can cause tipping or loss of control.

ATTACHMENTS AND BUCKETS (Cont’d)

A

Installing The Bucket Or Attachment

1

Warranty is void if non–approved attachments are used on the Bobcat loader.

I–2190–0199 N–17989

The loader is equipped with the Bob–T ach system. The Bob–Tach is used for fast changing of buckets and attachments. See the Attachment Operation & Maintenance Manual to install other attachments.

Pull the Bob–Tach levers all the way up (Item 1) [A].

Enter the loader.

Perform the PRE–STARTING procedure, Page 18. ach

Dealer Copy -- Not for Resale

With the lift arms all the way down, tilt the Bob–T forward.

Drive forward until the top edge of the Bob–T ach is completely under the top flange of the bucket[A] (or other attachments).

Be sure the Bob–Tach levers do not hit the bucket.

45 of 120

25

864, 864H Bobcat Loader Operation & Maintenance Manual

ATTACHMENTS AND BUCKETS (Cont’d)

A

Installing The Bucket Or Attachment (Cont’d) Tilt the Bob–Tach backward until the cutting edge of the bucket (or other attachment) is slightly off the ground [A].

Stop the engine and exit the loader.

Before you leave the operator’s seat: • Lower the lift arms, put the attachment flat on the ground.

• Stop the engine.

• Engage the parking brake.

• Raise seat bar.

• (Foot Pedal Controls) Move pedals until both lock.

• (Advanced Hand Controls) Move the hand controls to the NEUTRAL POSITION to make sure that both lift and tilt functions are deactivated.

The seat bar system must deactivate the lift and tilt control functions when the seat bar is up. Service the system if hand controls do not deactivate.

N–17990

W–2327–0798

1

Push down on the Bob–Tach levers until they are fully engaged in the locked position [C].

The levers will contact the frame as shown (Item 1) when locked.

N–17059 N–17058

[C]

If the levers do not engage in the lockedposition, see your Bobcat loader dealer for maintenance.

Bob–Tach levers have spring tension. Hold lever tightly and release slowly. Failure to obey warning can cause injury.

W–2054–1285

46 of 120

26

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

B

ATTACHMENTS AND BUCKETS (Cont’d)

A

The wedges (Item 1) [A] must extend through the holes (Item 1) [B] in the mounting frame of the bucket (or attachment), securely fastening the bucket to the Bob–Tach. The wedge is shown extending through the hole in the bucket [A].

1

N–17053

Bob–Tach wedges must extend through the holes in attachment. Levers must be fully down and locked. Failure to secure wedges can allow attachment to come off and cause injury or death.

B

1

N–17991

C

Removing The Bucket Or Attachment Lower the lift arms and put the attachment flat on the ground and lower or close the hydraulic equipment (ie: combination bucket, backhoe, etc.).

Stop the engine and relieve hydraulic pressure in the auxiliary circuit (See Relieving Hydraulic Pressure, Page 14.)

Dealer Copy -- Not for Resale

W–2102–0588

Exit the loader.

Pull the Bob–Tach levers [C] all the way up.

Disconnect the hydraulic hoses, if necessary.

N–17057

Enter the loader.

D

Perform the PRE–STARTING procedure , Page 18.

Tilt the Bob–Tach forward.

Move the loader backward, away from the bucket or attachment [D].

N–17989 47 of 120

27

864, 864H Bobcat Loader Operation & Maintenance Manual

OPERATING PROCEDURE

A

When operating on a public road or highway,always follow local regulations. For example: Slow Moving Vehicle Sign or direction signals may be required.

Always warm the engine and hydrostatic system operating the loader.

WITH BUCKET FULL

before

Going Up Slope

Machines warmed up with moderate engine speed and light load have longer life.

I–2015–0284

B

B–15272

WITH BUCKET FULL

New operators must operate the loader in an open area without bystanders. Operate the controls until the loader can be handled at an efficient and safe rate for all conditions of the work area.

With a full bucket, go up or down the slope with the heavy end toward the top of the slope [A] & [B].

Going Down Slope

C

With empty bucket, go down or up the slope with the heavy end toward the top of the slope [C] & [D].

• Keep the lift arms as low as possible.

• Do not travel or turn with the lift arms up.

• Turn on level ground.

• Go up and down slopes, not across them.

• Keep the heavy end of the machine uphill.

• Do not overload the machine.

WITH BUCKET EMPTY

Going Down Slope

D

Failure to obey warnings can cause the machine to tip or roll over and cause injury or death.

B–15256

B–15258

WITH BUCKET EMPTY

W–2018–1187

Raise the bucket only high enough to avoid obstructions on rough ground.

Going Up Slope 48 of 120

28

B–15257

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Operate the loader with the engine at full speed for maximum horsepower. Move the steering levers only a small amount to operate the loader slowly.

COMPACT TRACK LOADER OPERATING TIPS

A

WRONG

Correct track tension is important. If the tracks are too loose, they can easily derail. If they are too tight, they will wear faster and cause increased stress on the complete track carriage system.

Use a gradual turn (one lever farther forward than the other) instead of a fast turn (one steering lever forward, one backward) on asphalt or concrete surfaces to prevent reduced track life or derailing of tracks [A].

B–15298

CORRECT

TS–01871

C

Go directly up or down a slope, not across the slope to prevent tracks from derailing.

WRONG

WRONG

Dealer Copy -- Not for Resale

B

Keep the full length of the tracks in contact with the ground [B] for best traction. Raising the front end of the tracks off the ground [B] will reduce traction and cause increased track wear.

TS–01872

WRONG

Avoid operating the loader with one track on a slope and the other on flat ground [C] or with the edge of the track turned up against a curb or mound [C]. This can cause the tracks to derail, cracks in the edge of the tracks or cracks at the edges of the embedded metal.

B–15296

D

WRONG

WRONG

Avoid operating or turning on sharp objects such as jagged rocks or broken concrete. This can cause cuts on the lug surface of the tracks [C].

B–15297 49 of 120

29

864, 864H Bobcat Loader Operation & Maintenance Manual

OPERATING PROCEDURE (FOOT PEDALS)

A

Filling The Bucket Push down on the top of the lift pedal until the lift arms are all the way down.

B–12830

Push the top of the tilt pedal to put the cutting edge of the bucket on the ground [A].

B–15255

Drive slowly forward into the material. Push the bottom of the tilt pedal to raise the front of the bucket [B].

B–12830

Load, unload and turn on flat level ground. Do not exceed rated operating capacity shown on sign (decal) in cab. Failure to obey warnings can cause the machine to tip or roll over and cause injury or death.

W–2056–1187

Drive backward away from the material.

Emptying The Bucket Push down on the bottom of the lift pedal to raise the lift arms [C]. Push the top of the tilt pedal while raising the lift arms to level the bucket or attachment and help prevent material from falling off the back of the bucket or attachment.

B–15253

C

Drive forward slowly until the bucket is over the top of the truck box or bin. Push the top of the tilt pedal until the bucket is empty [C]. If all the material is near the side of the truck or bin, push it to the other side with the bucket.

B–12830

Never dump over an obstruction, such as a post, that can enter the operator cab. The machine could tip forward and cause injury or death.

W–2057–0694

B–15254 50 of 120

30

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

B

OPERATING PROCEDURES (FOOT PEDALS) (Cont’d)

A

Digging Into The Ground Put the lift arms all the way down. Push the top of the tilt pedal until the cutting edge of the bucket is on the ground.

Drive forward slowly and continue to tilt the bucket down until it enters the ground [A].

B–12830

Push the bottom of the tilt pedal a small amount to increase traction and keep an even digging depth. Continue to drive forward until the bucket is full. When the ground is hard, raise and lower the cutting edge of the bucket with the tilt pedal while driving forward slowly.

B–15249

Push the bottom of the tilt pedal to tilt the bucket backward as far as it will go when the bucket is full [B].

B–12830

Leveling The Ground (Using Lift Arms In Float Position) Push the top (toe) of the lift pedal all the way forward until the pedal is in the locked position to put the lift arms in the float position [C].

Dealer Copy -- Not for Resale

B

B–15252

Push the tilt pedal to change the position of the cutting edge on the bucket. With the bucket tilted farther forward, there is more force on the cutting edge and more loose material can be moved.

C B–12830

Never drive forward when the hydraulic control for lift arms is in float position.

I–2005–1285

Drive backward to level loose material. Push the bottom of the lift pedal to unlock from the float position.

B–15251 51 of 120

31

864, 864H Bobcat Loader Operation & Maintenance Manual

OPERATING PROCEDURES (FOOT PEDALS) (Cont’d)

A

Backfilling Lower the lift arms and put the cutting edge of the bucket on the ground. Drive forward to the edge of the hole to push the material into the hole [A].

B–12830

Tilt the bucket forward as soon as it is past the edge of the hole [A].

If necessary, raise the lift arms to empty the bucket.

PARKING THE BOBCAT LOADER Stop the loader on level ground.

In freezing temperatures, park the loader on planks, concrete, or asphalt to prevent the tracks from freezing to the ground.

Lower the lift arms fully and put the attachment flat on the ground.

B–15250

AVOID INJURY OR DEATH When operating the machine:

• Keep the seat belt fastened snugly.

• The seat bar must be lowered.

• Keep your feet on the footrests.

AVOID INJURY OR DEATH Before you leave the operator’s seat: • Lower the lift arms, put the attachment flat on the ground.

• Stop the engine.

• Engage the parking brake.

• Raise seat bar, move pedals until both lock.

W–2179–0694

W–2045–1086

Engage the parking brake.

Lift the seat bar and make sure the foot pedals are in the locked position.

Unbuckle the seat belt. Remove the key from the switch to prevent operation of the loader by unauthorized personnel.

Clean mud, ice, snow , etc. from the tracks and idlers to prevent freezing and future start–up difficulties.

During freezing temperatures, park the loader on a smooth, hard surface such as asphalt, concrete or wood planks.

52 of 120

32

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Pull the engine speed control lever all the way backward.

Turn the key switch to the OFF POSITION.

OPERATING PROCEDURE (HAND CONTROLS)

A

Filling The Bucket Move the left hand lever toward the operator until the lift arms are all the way down. Move the right hand away from the operator to put the cutting edge of the bucket on the ground [A].

B–15781

B–15255

Drive slowly forward into the material. Move the righthand lever toward the operator to raise the front of the bucket [B].

Load, unload and turn on flat level ground. Do not exceed rated operating capacity shown on sign (decal) in cab. Failure to obey warnings can cause the machine to tip or roll over and cause injury or death.

B–15781

W–2056–1187

Drive backward away from the material.

Emptying The Bucket Move the left hand lever away from the operator to raise the lift arms [C]. Move the right hand lever away from the operator to level the bucket or attachmentand help prevent material from falling off the back of the bucket or attachment.

Dealer Copy -- Not for Resale

B

B–15253

Drive forward slowly until the bucket is over the top of the truck box or bin. Move the right hand lever away from the operator until the bucket is empty [C]. If all the material is near the side of the truck or bin, push it to the other side with the bucket.

C

B–15781

Never dump over an obstruction, such as a post, that can enter the operator cab. The machine could tip forward and cause injury or death.

W–2057–0694

B–15254 53 of 120

33

864, 864H Bobcat Loader Operation & Maintenance Manual

OPERATING PROCEDURE (HAND CONTROLS) (Cont’d)

A

Digging Into The Ground Put the lift arms all the way down.Move the right hand lever away from the operator until the cutting edge of the bucket is on the ground. Drive forward slowly and continue to tilt the bucket down until it enters the ground [A].

Move the right hand lever toward the operator a small amount to increase traction and keep an even digging depth. Continue to drive forward until the bucket is full.

When the ground is hard, raise and lower the cutting edge of the bucket with the hand lever while driving forward slowly.

B–15781

B–15249

Move the right hand lever toward the operator to tilt the bucket backwards as far as it will go when the bucket is full [B].

B–15781

Leveling The Ground (Using Lift Arms In Float Position) Move the left hand lever all the way down and in until the hand lever is in the locked position to put the liftarms in the float position [C].

B–15252

C

Later AHC Models With Float Button – Press anbd hold the Float Button (Item 1) [C] before moving the lever.

– Press again to disengage.

1

Move the right hand lever to change the position of the cutting edge on the bucket. With the bucket tilted farther forward, there is more force on the cutting edge and more loose material can be moved.

B–15781

Never drive forward when the hydraulic control for lift arms is in float position.

I–2005–1285

Drive backward to level loose material. Move the left hand lever upward to unlock from the float position.

54 of 120

B–15251

34

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

B

OPERATING PROCEDURE (HAND CONTROLS) (Cont’d)

A

Backfilling Lower the lift arms and put the cutting edge of the bucket on the ground. Drive forward to the edge of the hole to push the material into the hole [A].

Tilt the bucket forward as soon as it is past the edge of the hole [A]. If necessary, raise the lift arms to empty the bucket.

B–15781

PARKING THE BOBCAT LOADER Stop the Bobcat loader on level ground.

In freezing temperatures, park the loader on planks, concrete, or asphalt to prevent the tracks from freezing to the ground.

Lower the lift arms fully and put the attachment flat on the ground.

B–15250

AVOID INJURY OR DEATH When operating the machine:

Before you leave the operator’s seat: • Lower the lift arms, put the attachment flat on the ground.

• Stop the engine.

• Engage the parking brake.

• Raise seat bar.

• (Advanced Hand Controls) Move the hand controls to the NEUTRAL POSITION to make sure that both lift and tilt functions are deactivated.

The seat bar system must deactivate the lift and tilt control functions when the seat bar is up. Service the system if hand controls do not deactivate.

• Keep the seat belt fastened snugly.

• The seat bar must be lowered.

• Keep your feet on the footrests.

W–2179–0694

Dealer Copy -- Not for Resale

Pull the engine speed control all the way backward. T urn the key switch to the OFF POSITION.

W–2346–0399

Engage the parking brake.

Lift the seat bar . Make sure the hand controls are in the neutral position.

Unbuckle the seat belt. Remove the key from the switch to prevent operation of the loader by unauthorized personnel.

Clean mud, ice, snow , etc. from the tracks and idlers to prevent freezing and future start–up difficulties.

During freezing temperatures, park the loader on a smooth, hard surface such as asphalt, concrete or wood planks.

55 of 120

35

864, 864H Bobcat Loader Operation & Maintenance Manual

TRANSPORTING THE BOBCAT LOADER

A

Adequately designed ramps of sufficient strength are needed to support the weight of the machine when loading onto a transport vehicle. Wood ramps can break and cause personal injury.

Support

W–2058–0494

N–18274

Always drive backward onto the transport vehicle[A] when the loader has an empty bucket or no attachment.

B

The rear of the trailer must be blocked or supported [A] when loading or unloading the loader to prevent the front end of the trailer from raising up.

Fasten the Bobcat loader to the transport vehicle to prevent the loader from moving during sudden stops or when going up or down slopes [B].

P–13807

P–13808

• Lower the bucket or attachment to the floor.

• Stop the engine and engage the parking brake.

• Install chains at the front and rear loader tie down positions (inset) [B].

• Fasten each end of the chain diagonally to the transport vehicle.

• Install load binders to tighten the chains.

STOPPING THE BOBCAT LOADER Put the steering levers in neutral.

The hydrostatic transmission will act as a service brake to stop the loader.

6707867

56 of 120

36

N–18275

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Be sure the transport and towing vehicles are of adequate size and capacity. (See SPECIFICATIONS Page 93, for weight of loader.)

TOWING THE LOADER

Never work on a machine with the lift arms up unless the lift arms are secured by an approved lift arm support device. Failure to use an approved lift arm support device can allow the lift arms or attachment to fall and cause injury or death.

W–2059–0598

Unexpected loader movement.

Can cause serious injury or death.

Push in and turn red Traction Lock By–Pass Knob clockwise to engaged position before operating loader.

Read Operation & Maintenance Manual for more instructions.

6803932

Tow the loader only a short distance at slow speed.

(Example: Moving the loader onto a transport vehicle).

The towing chain (or cable) must be rated at 1 & 1/2 times the weight of the loader. (See SPECIFICATIONS Page 93.)

A

The hydraulic brakes must be disengaged to allow towing of the loader.

• Early Model Loaders (Without Coupler)

– Remove the hose (Item 1) [A] from the lift arm by–pass valve located behind the steering lever panel near the right side of the loader . (The steering lever panel is shown removed, but it is not necessary to do so for this procedure.)

1 N–18673

– Put a cap on the fitting from the lift arm by–pass valve.

– Connect a Port–a–Power to the hose (Item 1) [A].

B

– Operate the Port–a–Power to 400 PSI (2758 kPa) to release the brake.

– Lower the cab and tow the loader.

1

– Disconnect the Port–a–Power.

Dealer Copy -- Not for Resale

• Raise the cab (SeeRaising The Operator Cab page ??.)

• Later Model Loaders (With Coupler)

– Disengage the parking brake solenoid valve by pushing IN on the red Traction Lock By–Pass Knob (Item 1) [B] and turning it 1/4 TURN counterclockwise. The knob will come out to release the solenoid valve.

N–18674

– Connect a Port–a–Power to thequick coupler located near the brake block (Item 1) [C].

C

– Operate the Port–a–Power to 400 PSI (2758 kPa) to release the brake.

1

– Lower the cab and tow the loader.

– Before operating the loader again, disconnect the Port–a–Power and (Early Models Only) remove the cap and connect the hydraulic hose to its original location.

– Engage the parking brake solenoid valve, by pushing IN on the red Traction Lock By–Pass Knob (Item 1) [B] and turning it 1/4 TURN clockwise.

N–18906

57 of 120

37

864, 864H Bobcat Loader Operation & Maintenance Manual

LIFTING THE LOADER

A

864/864H BICSOperation&MaintenanceManual#6900626–OperatingInstructionSection

Four Point Lift

AVOID INJURY OR DEATH • Before lifting, check fasteners on four point lift.

• Never allow riders in the cab or bystanders

TS–01840

within 15 feet (5 meters) while lifting the machine.

W–2160–0694

B

Lift the loader with the four point lift which is available as a kit from your Bobcat loader dealer.

Attach cables or chains to the four lift pointsas shown [A].

TS–01839

AVOID INJURY OR DEATH • Before lifting, check fasteners on single point lift and operator cab.

• Assemble front cab fasteners as shown in manual.

• Never allow riders in the cab or bystanders within 15 feet (5 meters) while lifting the machine.

W–2007–0694

Lift the loader with the single point lift which is available as a kit from your Bobcat loader dealer.

Attach cables or chains to the single point lift as shown [B].

The single point lift, supplied by Bobcat Company is designed to lift and support the Bobcat loader without affecting roll over and falling object protection features of the operator cab.

58 of 120

38

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Single Point Lift

PREVENTIVE MAINTENANCE AIR CLEANER SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 ...

ALTERNATOR BELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 ....

Adjusting The Alternator Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 ...

BOBCAT INTERLOCK CONTROL SYSTEM (BICS™) . . . . . . . . . . . . . . . . 49 .

Additional Inspection For Loaders With Advanced Hand Controls . . . . . . 49 Inspecting Deactivation Of The Auxiliary Hydraulic System . . . . . . . . . . .49 Inspecting The Lift Arm By–Pass Control . . . . . . . . . . . . . . . . . . . . . . . . . 49 ..

Inspecting The BICS™ Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 ..

Inspecting The Seat Bar Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 ..

Inspecting The Traction Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 ...

DRIVE BELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 ....

Adjusting The Drive Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 ...

Replacing The Drive Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66 ...

ELECTRICAL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 ...

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 ....

Fuse Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 ....

Removing And Installing The Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . .69 ..

Servicing The Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67 ..

Using A Booster Battery (Jump Starting) . . . . . . . . . . . . . . . . . . . . . . . . . 68 ..

ENGINE COOLING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 ...

Cleaning The Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 ...

ENGINE LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 ...

Checking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 ....

Oil Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61 ....

Replacing The Oil and Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 ...

PREVENTIVE MAINTENANCE

Dealer Copy -- Not for Resale

BOB–TACH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 ....

Inspection And Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 ...

FAN GEARBOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 ....

Checking And Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70 ...

FUEL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 ....

Filling The Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 ...

Fuel Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 ....

Fuel Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 ....

Removing Air From The Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 ..

Removing Fuel From The Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 ..

HYDRAULIC/HYDROSTATIC SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . .71 ..

Checking And Adding Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 ...

Hydraulic Reservoir Breather Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 ..

Replacing The Hydraulic/Hydrostatic Filter . . . . . . . . . . . . . . . . . . . . . . . .71 .

Replacing The Hydraulic Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 ...

HYDROSTATIC MOTOR CARRIER OIL . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 ..

Removing And Replacing Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 ...

59 of 120

39

864, 864H Bobcat Loader Operation & Maintenance Manual

PREVENTIVE MAINTENANCE (Cont’d) LIFT ARM SUPPORT DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ...

Disengaging The Lift Arm Support Device . . . . . . . . . . . . . . . . . . . . . . . . 53 ..

Engaging The Lift Arm Support Device . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ..

LUBRICATION OF THE BOBCAT LOADER . . . . . . . . . . . . . . . . . . . . . . . . 74 ..

OPERATOR CAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 ....

Emergency Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 ....

Lowering The Operator Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 ...

Raising The Operator Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 ...

PIVOT PINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 ....

REAR DOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 ....

Latch Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 ....

REAR GRILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55 ....

SEAT BAR RESTRAINT SYSTEM (FOOT PEDALS) . . . . . . . . . . . . . . . . . . 47 .

Inspecting The Seat Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 ...

Maintaining The Seat Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 ...

SERVICE SCHEDULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 ...

TIMING BELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 ....

TRACK TENSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 ....

Adjusting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 ....

TRACK ROLLER AND IDLER LUBRICATION . . . . . . . . . . . . . . . . . . . . . . . .74 .

Removing And Replacing Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 ...

TRACTION LOCK CONTROL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 ..

Inspecting The Traction Lock Control System . . . . . . . . . . . . . . . . . . . . . .50 .

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 ....

60 of 120

40

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

SEAT BAR RESTRAINT SYSTEM (ADVANCED HAND CONTROLS) . . . . 48 Inspecting The Seat Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 ...

Maintaining The Seat Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 ...

MAINTENANCE SAFETY Instructions are necessary before operating or servicing machine. Read and understand the Operation & Maintenance Manual, Handbook and signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing. Check for correct function after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death.

W–2003–0199

Safety Alert Symbol: This symbol with a warning statement, means: “Warning, be alert! Your safety is involved!” Carefully read the message that follows.

CORRECT

CORRECT

B–10731

B–15248

B–15247

Never service the Bobcat® Loader without instructions.

Use the correct procedure to lift or lower operator cab.

Cleaning and maintenance are required daily.

WRONG

WRONG

WRONG Dealer Copy -- Not for Resale

CORRECT

B–15246

B–15275

B–15279

Have good ventilation when welding or grinding painted parts.

Wear dust mask when grinding painted parts. Toxic dust and gas can be produced.

Avoid exhaust fume leaks which can kill without warning. Exhaust system must be tightly sealed.

Disconnecting or loosening any hydraulic tubeline, hose, fitting, component or a part failure can cause lift arms to drop. Do not go under lift arms when raised unless supported by an approved lift arm support device. Replace if damaged.

Never work on loader with lift arms up unless lift arms are held by an approved lift arm support device. Replace if damaged.

Never modify equipment or add attachments not approved by Bobcat Company.

WRONG

WRONG

WRONG

B–15245

B–15244

B–6589

Stop, cool and clean engine of flammable materials before checking fluids.

Never service or adjust loader with the engine running unless instructed to do so in the manual.

Avoid contact with leaking hydraulic fluid or diesel fuel under pressure. It can penetrate the skin or eyes.

Never fill fuel tank with engine running, while smoking or when near open flame.

Keep body, jewelry and clothing away from moving parts, electrical contacts, hot parts and exhaust.

Wear eye protection to guard from battery acid, compressed springs, fluids under pressure and flying debris when engines are running or tools are used. Use eye protection approved for type of welding.

Keep rear door closed except for service. Close and latch door before operating the loader.

Lead–acid batteries produce flammable and explosive gases.

Keep arcs, sparks, flames and lighted tobacco away from batteries.

Batteries contain acid which burns eyes or skin on contact.

Wear protective clothing. If acid contacts body, flush well with water. For eye contact flush well and get immediate medical attention.

Maintenance procedures which are given in the Operation & Maintenance Manual can be performed by the owner/operator without any specific technical training. Maintenance procedures which are not in the Operation & Maintenance Manual must be performed ONLY BY QUALIFIED BOBCAT SERVICE PERSONNEL. Always use genuine Bobcat replacement parts. The Service Safety Training Course is available from your Bobcat dealer.

61 of 120

41

MSW06–0100

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 62 of 120

42

864, 864H Bobcat Loader Operation & Maintenance Manual

SERVICE SCHEDULE 11.

Maintenance work must be done at regular intervals. Failure to do so will result in excessive wear and early failures. The service schedule is a guide for correct maintenance of the Bobcat loader.

Instructions are necessary before operating or servicing machine. Read and understand the Operation & Maintenance Manual, Handbook and signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing. Check for correct function after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death.

W–2003–0199

SERVICE SCHEDULE Engine Oil Engine Air Filter and Air System Engine Cooling System Lift Arms, Cyl. Bob–Tach Pivot Pins and Wedges

Seat Belt, Seat Bar and Pedal Interlocks Bobcat Interlock Control System (BICS™) Safety Signs and Safety Treads Operator Cab Fuel Filter Tracks Hyd. Fluid, Hoses & Tubelines Battery Foot Pedals or Hand Controls & Steering Parking Brake Alternator Belt Engine/Hydro. Drive Belt Fuel Filter Steering Shaft Hyd. Reservoir Breather Cap Hyd./Hydro. Filter Engine Oil and Filter

SERVICE REQUIRED

8-10

50

n

n

n

◊

250

500

1000

3000

Check the oil level and add oil as needed.

Check condition indicator or display panel. Service only when required. Check for leaks and damaged components.

Clean debris from oil cooler radiator & grill.

Lubricate with multi–purpose lithium based grease (12 places).

Check the condition of seat belt. Check the seat bar, and foot pedal interlocks for correct operation. Clean dirt and debris from moving parts.

Check BICS functions.

Check for damaged signs (decals) and safety treads. Replace any signs or safety treads that are damaged or worn.

Check the fastening bolts, washers and nuts. Check the condition of cab.

Remove the trapped water. } Check for damaged tracks and correct tension.

Check fluid level and add as needed. Check for damage and leaks.

Repair and replace as needed.

Check cables connections and electrolyte level. Add distilled water as needed.

Check for correct operation. Repair or adjust as needed.

Check operation of the brake.

Check tension and adjust as needed. * Check for wear or damage. Check idler arm stop.

Replace filter element.

Grease three fittings.

Replace the reservoir breather cap.

D Replace the filter element. {Replace oil & filter. Use CD or better grade oil and Bobcat filter.

Hydraulic Reservoir Hydrostatic Motors

Clean or replace the fluid.

Clean or replace the case drain filters.

Hydrostatic Motor Carrier Bobcat Interlock Control System (BICSt) Fan Drive Gearbox Engine Valves Track Rollers and Idlers Engine Timing Belt

Replace oil. Use SAE 10W–40.

Check lift arm by–pass control.

Dealer Copy -- Not for Resale

ITEM

HOURS

Check gear lubrication level. ∞ Adjust the engine valves.

Replace oil. Use SAE 10W–40. (Rollers–70cc, Idlers–100cc) ◊ Replace the timing belt and belt tensioner assy.

D Also replace hydraulic/hydrostatic filter element when the transmission warning light comes ON. J Or every 12 months. * Inspect the new belt after first 50 hours. { Replace break–in filter and engine oil at 50 hours on a new loader; 500 hours thereafter. ∞ After the first 500 hours on new engine, adjust engine valves; 1000 hours thereafter. (See Service Manual for procedure.) ◊ Or every 5 years. } Check every 8–10 hours for the first 50 hours. Then at 50 hour intervals.

63 of 120

43

864, 864H Bobcat Loader Operation & Maintenance Manual

OPERATOR CAB

A

The Bobcat loader has an operator cab (ROPS and FOPS) as standard equipment to protect the operator from rollover and falling objects. Check with your dealer if the operator cab has been damaged.

ROPS/FOPS – Roll Over Protective Structure per SAE J1040 and ISO 3471, and Falling Object Protective Structure per SAE J1043 and ISO 3449, Level l. Level ll is available.

Level l – Protection from falling bricks, small concrete blocks and hand tools encountered in operations such as highway maintenance, landscaping, and other construction site services.

P–10887

Level ll – Protection from falling trees, rocks; for machines involved in site clearing, overhead demolition or forestry.

P–10888

B N–17983

Dealer Copy -- Not for Resale

Never modify operator cab by welding, grinding, drilling holes or adding attachments unless instructed to do so by Bobcat Company.

Changes to the cab can cause loss of operator protection from rollover and falling objects, and result in injury or death.

W–2069–1285

Before the cab or the lift arms are raised for service, jackstands must be put under the rear corners of the frame. Failure to use jackstands can allow the machine to tip backward causing injury or death.

W–2014–0895

Raising The Operator Cab 12.

Stop the loader on a level surface, lower the lift arms and stop the engine.

If the lift arms must be up while raising the cab, install an approved lift arm support device. (See Engaging The Lift Arm Support Device Page 52.)

N–17986

Put Jackstands under the rear of the loader frame (Inset) [B].

Remove the nut and plate at the front corner of the cab (both sides) [A].

Lift on the grab handle and bottom of the cab slowly until the cab latching mechanism engages and the cab is all the way up [B].

64 of 120

44

864, 864H Bobcat Loader Operation & Maintenance Manual

OPERATOR CAB (Cont’d)

A

Lowering the Operator Cab 13.

Always stop the engine before raising or lowering the cab.

NOTE: Make sure the seat bar is fully raised or lowered when lowering the cab. Always use the grab handles to lower the cab.

Pull down on the bottom of the operator cab until it stops at the latching mechanism.

Release the latching mechanism and pull the cab all the way down [A].

N–20120

N–17987

B

Install the plate and nut (both sides) [B].

P–10888

65 of 120

45

P–10887

Dealer Copy -- Not for Resale

Tighten the nuts to 40–50 ft.–lbs. (54–68 Nm) torque.

864, 864H Bobcat Loader Operation & Maintenance Manual

OPERATOR CAB (CONT’D)

A

Emergency Exit The front opening on the cab and rear window provide exits.

Rear Window: (If Equipped) Pull on the tag on the top of the rear window to remove the rubber cord [A].

P–10168

B

Push the rear window out of the rear of the cab.

N–17988

C

Front Door: (If Equipped) NOTE: When an Operator Cab Enclosure Kit is installed, the window of the front door can be used as an emergency exit [C].

Pull the plastic loop at the top of the window in the front door to remove the rubber cord [C].

P–09216

Push the window out with your foot [D].

D

Exit through the front door.

P–09217

66 of 120

46

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Exit through the rear of the cab [B].

SEAT BAR RESTRAINT SYSTEM (FOOT PEDALS) 14.

The seat bar restraint system has a pivoting, spring assist seat bar with arm rests and has spring loaded interlocks for the lift and tilt control functions.

A Clean (Both Sides)

The operator controls the use of the seat bar. The seat bar in the down position helps to keep the operator in the seat.

The interlocks require the operator to lower the seat bar in order to operate the hand controls.

When the seat bar is up, the lift and tilt control functions are locked when returned to the NEUTRAL POSITION.

P–10361

AVOID INJURY OR DEATH

W–2263–0597

AVOID INJURY OR DEATH Never operate loader without interlock shield 6705474 on both interlocks. Shields prevent foot from unlocking interlocks when leaving loader seat.

W–2158–0594

Inspecting The Seat Bar Sit in the seat and fasten the seat belt. Engage the parking brake. Pull the seat bar all the way down. Start the engine.

Press the green PRESS TO OPERATE Button. Operate each foot pedal to check both the lift and tilt functions.

Raise the lift arms until the bucket is about 2feet (600 mm) off the ground.

B

Raise the seat bar. Try to move each foot pedal. Pedals must be firmly locked in neutral position. There must be no motion of the lift arms or tilt (bucket) when the pedals are pushed.

Pull the seat bar down, press the green PRESS TO OPERATE Button, lower the lift arms. Operate the lift pedals. While the lift arms are going up, raise the seat bar and the lift arms must stop.

Lower the seat bar, press the greenPRESS TO OPERATE Button, lower the lift arms and put the bucket flat on the ground. Stop the engine. Raise the seat bar and operate the foot pedals to be sure that the pedals are firmly locked in the neutral position. Unbuckle the seat belt.

Dealer Copy -- Not for Resale

The Seat Bar System must lock the lift and tilt foot pedals or hand controls in neutral when the Seat Bar is up. Service the system if controls do not lock correctly.

Interlock Interlock Shield Shield Clean (Both Sides)

Maintaining The Seat Bar See the SERVICE SCHEDULE Page 43 and on the loader for correct service interval.

Clean any debris or dirt from the moving parts [A] & [B].

Inspect the linkage bolts and nuts for tightness. The correct torque is 25–28 ft.–lbs. (34–38 Nm).

If the seat bar system does not function correctly , check for free movement of each linkage part. Check for excessive wear. Adjust pedal control linkage. Replace parts that are worn or damaged. Use only genuine Bobcat replacement parts.

P–10821

67 of 120

47

864, 864H Bobcat Loader Operation & Maintenance Manual

SEAT BAR RESTRAINT SYSTEM (ADVANCED HAND CONTROLS) 15.

The seat bar restraint system has a pivoting seat bar (Item 1) [A] with arm rests.

A

The operator controls the use of the seat bar. The seat bar in the down position helps to keep the operator in the seat.

1

When the seat bar is down and the green PRESS TO OPERATE Button is activated, the lift, tilt, and traction drive functions can be operated.

When the seat bar is up, the lift, tilt, and traction drive functions are deactivated.

P–13721

Inspecting The Seat Bar Sit in the operator’s seat. Turn the key ON, lower the seat bar and press the green PRESS TO OPERATE Button.

Both lights on the left handle should be ON.

B Clean (Both Sides)

Move each hand control back and forth. You should hear the zip–zip sound of the lift and tilt actuators moving the control valve spools (under the seat).

Move each hand control back and forth. There must be no zip–zip sound of the lift or tilt actuators. If either actuator makes a sound while the seat bar is raised, contact your dealer for service.

Maintaining The Seat Bar

P–10361

See the SERVICE SCHEDULE Page 43 for correct service interval.

Clean any debris or dirt from the moving parts [B].

If the seat bar system does not function correctly replace parts that are worn or damaged. Use only genuine Bobcat replacement parts.

Before you leave the operator’s seat: • Lower the lift arms, put the attachment flat on the ground.

• Stop the engine.

• Engage the parking brake.

• Raise seat bar.

• (Advanced Hand Controls) Move the hand controls to the NEUTRAL POSITION to make sure that both lift and tilt functions are deactivated.

The seat bar system must deactivate the lift and tilt control functions when the seat bar is up. Service the system if hand controls do not deactivate.

W–2321–0698

68 of 120

48

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Raise the seat bar fully. Both lights on the left handle should be OFF.

BOBCAT INTERLOCK CONTROL SYSTEM (BICS™) Inspecting The BICS™ Controller (Engine STOPPED – Key ON) 16.

1. Sit in the operator ’s seat. Turn key ON, lower the seat bar and disengage the parking brake. Press the green PRESS TO OPERATE Button. Four (4) BICS controller lights should be ON (Items 1,2,3, & 5)[A].

2. Engage the parking brake and raise the seat bar fully. System Activated (Item 1) [A], seat bar light (Item 2) [A], valve light (Item 3)[A] and traction light (Item 4) [A] should be OFF. NOTE: If lights on BICS Controller are blinking, see BICS Troubleshooting Chart, Page 81.)

A

1 2 3 4 5

3. Exit the loader and press traction lock override button. Traction light (Item 4) [A] should be ON. Press override button again and traction light (Item 4) [A] should be OFF. Deactivation Of The Auxiliary Hydraulics System (Engine STOPPED – Key ON) 4. Sit in the operator’s seat. Lower the Seat Bar. Press the green PRESS TO OPERATE Button [B]. Press the auxiliary hydraulics switch. The auxiliary switch light will come ON. Raise the Seat Bar . The light should be OFF.

N–17979

The Bobcat Interlock Control System (BICS) must deactivate the lift, tilt and traction drive functions. If it does not, contact your dealer for service. DO NOT modify the system.

6. Start the engine and operate at low idle. While raising the lift arms, raise the seat bar fully. The lift arms should stop. Repeat using the tilt function.

W–2151–0394

Inspecting The Traction Lock (Engine RUNNING) 7. Fasten the seat belt, disengage the parking brake, and raise the seat bar fully. Move the steering levers slowly forward and backward. The traction lock should be engaged. Lower the seat bar.

B

8. Engage the parking brake pedal and move the steering levers slowly forward and backward. The traction lock should be engaged.

Dealer Copy -- Not for Resale

AVOID INJURY OR DEATH

Inspecting The Seat Bar Sensor (Engine RUNNING) 5. Sit in the operator’s seat. Lower the seat bar. Press the green PRESS TO OPERATE button [B].

Engage the parking brake. Fasten the seat belt.

Inspecting The Lift Arm By–Pass Control 9. Raise the lift arms 6 feet (2 m) off the ground. Stop the engine. Turn the Lift Arm By–Pass Control Knob clockwise 1/4 turn. Then pull up and hold the Lift Arm By–Pass Control Knob until the lift arms slowly lower.

N–18290

Additional Inspection For Loaders With Advanced Hand Controls 10. Sit in the operator ’s seat and fasten the Seat Belt.

Lower the Seat Bar, start the engine and press the green PRESS TO OPERATE Button [B].

11. Raise the lift arms about 6 feet (2 meters) of f the ground.

12. Turn the key OFF and wait for the engine to come to a complete stop.

13. Turn the key ON. Press the green PRESS TO OPERATE Button, [B] move the left hand control toward the operator. The lift arms should not lower.

14. Move the right hand control away from the operator.

The bucket (or attachment) should not tilt forward.

69 of 120

49

864, 864H Bobcat Loader Operation & Maintenance Manual

TRACTION LOCK CONTROL SYSTEM

A

Inspecting The Traction Lock Control System 15.

1. Sit in the operator’s seat. Turn the key ON, lower the seat bar. Press the green PRESS TO OPERATE Button, and disengage the parking brake. Four (4) of the BICS Controller lights should be ON (Items 1,2,3, and 5) [A]. The Traction light (Item 4) [A] should be OFF.

1 2 3 4 5

2. Fasten the Seat Belt, engage the parking brake, start the engine and press the PRESS TO OPERATE Button. Disengage the parking brake and operate at low idle. The T raction light (Item 4) [A] should be ON. N–17979

Maintenance Check the wire connections at the engine speed sensor (Item 1) [B].

B

NOTE: When the Traction Lock Override Button is activated, the Traction Lock Override Control System will NOT engage the Traction Lock if the engine stops.

P–09440

PIVOT PINS

C

All lift arm and cylinder pivots have a large pin held in position with a retainer bolt and lock nut (Item 1) [C].

Check that the lock nuts are tightened to 18–20 (24–27 Nm) torque.

ft.–lbs.

1

P–01529

70 of 120

50

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

1

TRACK TENSION

A

Track tension is important for good performance and to prevent the tracks from derailing.

NOTE: The wear of track rollers vary with the working conditions and different types of soil conditions.

P–13810

Park the loader on a level surface.

Raise one side of the loader and put jackstands at the front and rear of the loader frame so that the track is about 3 inches (76 mm) off the ground [A]. Lower the loader to the jackstands. Be sure the jackstands do not touch the tracks.

Measure the track sag at either middle track roller[A]. DO NOT put your fingers into the pinch points between the track and the roller. Use a 1/2 to 5/8 inch bolt, dowel or block to check the gap [A] & [B].

N–18057

B

AVOID INJURY Keep fingers and hands out of pinch points when checking the track tension.

W–2142–0189

Track

Loosen the cover bolts and turn the cover down [C].

P–13810

C

Adjusting

2 1

Dealer Copy -- Not for Resale

Track Roller

1/2–5/8 inch (13–16 mm)

N–18060

Increase Track Tension Add grease to the adjustment fitting (Item 1) [C] until the track adjustment is correct [A] & [B].

NOTE: Do not remove adjustment fitting unless pressure is released. (See Decrease Track Tension, Page 52) NOTE: If replacement is necessary, always replace adjustment fitting (Item 1) [A] with genuine Bobcat Parts. The fitting is a special fitting designed for high pressure.

71 of 120

51

864, 864H Bobcat Loader Operation & Maintenance Manual

TRACK TENSION (CONT’D)

A

Adjusting (Cont’d)

1

Decrease Track Tension Pressure must be released from the spring and adjustment cylinder to decrease track tension.

Install the bleed tool on thebleed fitting (Item 1) [A], adjust and tighten the collar to fit behind the edge of the access hole and the cover.

N–18490

Tighten the cover bolt (Item 1) [B] to secure the tool.

B

Turn the tool 1/4 turn counterclockwise and let the grease flow into a container. Turn the tool one additional turn to continue to release pressure [B].

1

Raise the loader. Remove the jackstands.

Dispose of the grease in an environmentally safe manner.

N–18489

LIFT ARM SUPPORT DEVICE

C 2

Never work on a machine with the lift arms up unless the lift arms are secured by an approved lift arm support device. Failure to use an approved lift arm support device can allow the lift arms or attachment to fall and cause injury or death.

W–2059–0598

1

Engaging The Lift Arm Support Device 3.

Maintenance and service work can be done with the lift arms lowered. If the lift arms are raised, use the following procedure to install the lift arm support device:

N–17992

D

Install jackstands under the rear of the loader frame.

1

Disconnect the spring from the pin (Item 1)[C]. Hold the lift arm support device (Item 2) [C] up and remove the pin.

Lower the lift arm support device on top of the lift cylinder.

Hook the free end of the spring (Item 1) [D] to the lift arm support device so it does not interfere with the support device engagement.

Sit in the seat, fasten the seat belt and lower the seat bar.

Start the engine.

72 of 120

N–17993

52

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Repeat the procedure for the other track.

LIFT ARM SUPPORT DEVICE (Cont’d)

A

Installing The Lift Arm Support Device (Cont’d) Raise the lift arms until the lift arm support device drops onto the lift cylinder rod (inset) [A] Lower the lift arms slowly until the support device is held between the lift arm and the lift cylinder.

Stop the engine.

1

N–17997

Raise the seat bar.

(Foot Pedal Controls) Move both pedals until both lock.

(Advanced Hand Controls) Move the hand controls to the NEUTRAL POSITION to make sure that both lift and tilt functions are deactivated.

N–17994

Exit the cab.

Service lift arm support device if damaged or if parts are missing. Using a damaged lift arm support or with missing parts can cause lift arms to drop causing injury or death.

W–2271–1197

N–17998

Disengaging The Lift Arm Support Device

C

Remove the pin from the lift arm support device.

Connect the spring (Item 1) [C] from the lift arm support device to the bracket below the lift arms.

Enter the cab.

1

Sit in the seat, fasten the seat belt and lower the seat bar.

Dealer Copy -- Not for Resale

B

Install pin (Item 1) [B] into the rear of the lift arm support device below the cylinder rod.

1

Start the engine.

Raise the lift arms a small amount and the spring will lift the support device off the lift cylinder rod [C].

Lower the lift arms.

Stop the engine.

N–17995

N–17996

Raise the seat bar.

D

(Foot Pedal controls) Move both pedals until both lock.

(Advanced Hand Controls) Move the hand controls to the NEUTRAL POSITION to make sure that both lift and tilt functions are deactivated.

Exit the cab.

Disconnect the spring from the bracket.

Raise the support device into storage position and insert pin through lift arm support device and bracket(Item) 1 [D].

2

1

Connect spring to pin (Item 2) [D].

N–17992 73 of 120

53

864, 864H Bobcat Loader Operation & Maintenance Manual

BOB–TACH

A

Inspection And Maintenance Move the Bob–Tach levers to engage the wedges[A]. The levers and wedges must move freely.

The wedges must extend through the holes in the attachment mounting frame (Item 1) [A].

1

N–17027

Bob–Tach wedges must extend through the holes in attachment. Levers must be fully down and locked. Failure to secure wedges can allow attachment to come off and cause injury or death.

B

W–2102–0588

If the wedge does not contact the lower edge of the hole [B] and [C], the attachment will be loose and can come off the Bob–Tach.

1

N–17991

C

Bob–Tach Wedge

Wedge Must Contact Lower Edge Of Hole In The Attachment B–15177

Inspect the mounting frame on the attachment and the Bob–Tach, linkages and wedges for excessive wear or damage [D]. Replace any parts that aredamaged, bent, or missing. Keep all fasteners tight.

D

Look for cracked welds. Contact your Bobcat dealer for repair or replacement parts.

Lubricate the wedges (See SERVICE SCHEDULE, Page 43 and LUBRICATION OF THE BOBCAT LOADER, Page 75).

TS–01062 74 of 120

54

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

The spring loaded wedge (Item 1) [A] must contact the lower edge of the hole in the attachment (Item 1) [B] and [C].

REAR DOOR

A

AVOID INJURY

1

Never service or adjust the machine when the engine is running unless instructed to do so in the manual.

P–10350

W–2012–0290

Put your fingers into the slot in the rear door and pull on the latch handle [A].

Pull the rear door open. The door will latch in the full open position.

Keep the rear door closed when operating the machine. Failure to do so could seriously injure a bystander.

N–17976

P–10350

W–2020–1285

B

Adjusting the Rear Door

2

The door latch catch (Item 1) [B] can be adjusted side to side for alignment with the door latch mechanism.

The door latch mechanism (Item 2) [B] can be adjusted backward or forward for alignment with the door catch.

Dealer Copy -- Not for Resale

Push the door stop (Item 1) [A] up into the hinge before closing the rear door.

1

P–10352

REAR GRILL

P–10339

C

Open the rear door.

Raise the rear grill [C].

1

The rear grill is held open by the cylinder (Item 1) [C] on the right side of the rear grill.

P–10816

P–10824 75 of 120

55

864, 864H Bobcat Loader Operation & Maintenance Manual

AIR CLEANER SERVICE

A

Without BOSS®: Replace the outer filter element only when the red ring shows in the window of the condition indicator (Item 1) [A].

2 1

NOTE: Before replacing the filter element, push the button on the condition indicator (Item 2) [A].

Start the engine, then stop the engine. If the red ring does not show, do not replace the filter element.

P–10799

Replace the inner filter every third time the outer filter is replaced or when the red ring still shows in the indicator window after the outer filter has been replaced.

B

MC–02322

Release the three dust cover fasteners (Item 1) [C].

C

Remove the dust cover.

1

P–10800

76 of 120

56

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

With BOSS®: It is important to change the air filter element only when the service codes (on the BOSS ® option instrument panel) shows the symbols AF.2 [B].

AIR CLEANER SERVICE (Cont’d)

A

Remove the outer filter element [A].

NOTE: Make sure all sealing surfaces are free of dirt and debris.

Install the new outer filter element.

P–10798

Only replace the inner filter element under the following conditions [B]: replaced or when the red ring still shows in the indicator window after the outer filter has been replaced.

• When the service codes on the instrument panel shows symbol AF.2 during full engine speed, replace the inner filter element only after the outer filter element has been replaced. (See Page 79.)

P–10802

Align the tab on the cover with one of the slots on air cleaner housing.

C

The evacuator (Item 1) [C] must be at the bottom.

Push dust cover into place and secure with wire fasteners.

Check all hoses, tubes, clamps and air cleaner housing for damage. Check to make sure all connections are tight.

Dealer Copy -- Not for Resale

B

• Replace the inner filter every third time the outer filter is

1 P–10353

77 of 120

57

864, 864H Bobcat Loader Operation & Maintenance Manual

FUEL SYSTEM

A

Fuel Specifications Use only clean, high quality diesel fuel, Grade No. 2 Grade No. 1.

or

The following is one suggested blending guideline which should prevent fuel gelling problems during cold temperatures: Temp. F° (C°)

No. 2

No.1

+15° (9°) Down to –20° (–29°) Below –20° (–29°)

100% 50% 0%

0% 50% 100%

1

N–18269

See your fuel supplier for local recommendations.

WRONG

Stop and cool the engine before adding fuel.

NO SMOKING! Failure to obey warnings can cause an explosion or fire.

W–2063–0887

Remove the fuel fill cap (Item 1) [A].

B–15243

Use a clean, approved safety container to add fuel of the correct specifications. Add fuel only in an area that has free movement of air and no open flames or sparks.

NO SMOKING! [B].

Install and tighten the fuel fill cap [A].

78 of 120

58

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

B

Filling The Fuel Tank

FUEL SYSTEM (Cont’d)

A

Fuel Filter See the SERVICE SCHEDULE Page 43 for the recommended service interval when to remove the water from the fuel filter.

2

Loosen the drain (Item 1) [A] at the bottom of the filter element to drain water from the filter.

See the SERVICE SCHEDULE Page 43 for the recommended service interval when to replace the fuel filter.

Remove the filter element [A].

Clean the area around the filter housing.

1

Put oil on the seal of the new filter element.

Install the fuel filter, and hand tighten.

Remove the air from the fuel system.

After replacing the fuel filter element or when the fuel tank has run out of fuel, the air must be removed from the fuel system before starting the engine.

3

Loosen the air vent plug (Item 2) [A] at the top of the fuel filter.

Squeeze the priming bulb (Item 3) [A] until fuel with no air bubbles flows from the vent

P–10803

Tighten the air vent plug.

Diesel fuel or hydraulic fluid under pressure can penetrate skin or eyes, causing serious injury or death. Fluid leaks under pressure may not be visible. Use a piece or cardboard or wood to find leaks. Do not use your bare hand.

Wear safety goggles. If fluid enters skin or eyes, get immediate medical attention from a physician familiar with this injury.

Dealer Copy -- Not for Resale

Removing Air From The Fuel System

Always clean up spilled fuel or oil. Keep heat, flames, sparks or lighted tobacco away from fuel and oil. Failure to use care around combustibles can cause explosion or fire which can result in injury or death.

W–2103–1285

W–2072–0496

79 of 120

59

864, 864H Bobcat Loader Operation & Maintenance Manual

FUEL SYSTEM (Cont’d)

A

Removing Fuel From The Fuel Tank The fuel tank is located between the sides of the Frame of the loader.

Main

1

There is an access cover under the Main Frame at the left side of the loader [A].

Loosen the two bolts [A] on the access cover.

2

N–17981

Pivot the access cover [B] to expose the drain plug on the fuel tank.

N–17982

Remove the drain plug (Item 1)[C] (viewed from outside of loader through access hole between tracks and frame) and drain the fuel from the tank.

C 1

Dispose of the fuel in an environmentally safe manner.

Install plug and tighten the bolts on the access cover before filling with fuel.

N–17984

80 of 120

60

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

B

ENGINE LUBRICATION 4.

Checking

A

Check the engine oil level every day before starting the engine for the work shift.

Open the rear door and remove the dipstick (Item 1) [A].

Keep the oil level between the marks on the dipstick.

2

1

Engine oil is also used to provide engine cooling. Check oil level every day for correct engine lubrication and also engine cooling.

Use a good quality motor oil that meets API Service Classification of CD or better (See Oil Chart below).

P–10801

Oil Chart RECOMMENDED SAE VISCOSITY NUMBER (LUBRICATION OILS FOR DIESEL ENGINE CRANKCASE)

C° –40

–34

–29

–23

–18

–13

–7

–1

+4

+10

+15

+21

+27

+32

+38

+43 +49

SAE 40W or 20W–50

Always clean up spilled fuel or oil. Keep heat, flames, sparks or lighted tobacco away from fuel and oil. Failure to use care around combustibles can cause explosion or fire which can result in injury or death.

SAE 15W–40 SAE 30W

W–2103–1285

* SAE 5W–30 SAE 20W–20 SAE 10W SYNTHETIC OIL Use recommendation from Synthetic Oil Mfgr.

–40 –30

–20

–10

0

+10

+20

+30

+40

+50

+60

+70

+80

+90 +100 +110 +120

F°

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE (DIESEL ENGINES MUST USE API CLASSIFICATION CD, CF4, CG4 )

Dealer Copy -- Not for Resale

SAE 10W–30

* Can be used ONLY when available with appropriate diesel rating.

Replacing The Oil And Filter 5.

See the SERVICE SCHEDULE Page 43 for the service interval for replacing the engine oil and filter.

Run the engine until it is at operating temperature. Stop the engine.

Open the rear door.

Remove the drain plug (Item 2) [A]. Drain the oil into container and dispose of used oil in an environmentally safe manner. Reinstall the drain plug.

81 of 120

61

864, 864H Bobcat Loader Operation & Maintenance Manual

ENGINE LUBRICATION (Cont’d)

A

6.

Replacing Oil And Filter (Cont’d) Remove the oil filter (Item 1) [A].

2 1

Clean the filter housing surface.

3

Put clean oil on the new oil filter gasket. Install the filter and hand tighten only.

Use only genuine Bobcat filter.

Remove the fill cap (Item 2) [A].

Put 10 qts. (9,5 L) of oil in the engine.

P–10801

Start the engine and let it run for several minutes. Stop the engine. Check for leaks.

B

Remove the dipstick (Item 3) [A]. Check the oil level.

Add oil as needed if it is not at the top mark on the dipstick (Item 1) [B]. Do not over fill.

Always clean up spilled fuel or oil. Keep heat, flames, sparks or lighted tobacco away from fuel and oil. Failure to use care around combustibles can cause explosion or fire which can result in injury or death.

N–18292

W–2103–1285

82 of 120

62

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

1

ENGINE COOLING SYSTEM Check the cooling system every day to prevent over–heating, loss of performance or engine damage.

Engine oil is used to provide both engine lubrication and cooling. No anti–freeze/water mixture is used for engine cooling.

Wear safety glasses to prevent eye injury when any of the following conditions exist:

It is important to check the engine oil level every day to maintain adequate engine lubrication and also engine cooling.

• When fluids are under pressure.

• Flying debris or loose material is present.

• Engine is running.

• Tools are being used.

When engine oil is changed, only the oil in the engine oil pan and filter is replaced. Approximately 7 quarts (6.6 liters) of oil remains in the cooling system (hoses and radiator).

W–2019–1285

When changing engine oil, follow the procedures carefully for correct quantity.

A

Cleaning The Cooling System Raise the rear grill [A].

Use air pressure or water pressure to clean the top of the hydraulic/hydrostatic oil cooler (Item 1) [A].

P–10822

Remove the hair pin (Item 1) [B] (both sides) so the oil cooler can be raised.

B

Dealer Copy -- Not for Resale

1

1

P–10816

Raise the oil cooler. Use air pressure or water pressure to clean the top of the engine oil cooler (Item 1) [C].

C

1

P–10823 83 of 120

63

864, 864H Bobcat Loader Operation & Maintenance Manual

ALTERNATOR BELT

A

Adjusting The Alternator Belt Stop the engine.

Loosen the alternator mounting and adjustment bolts (Item 1) [A].

1

P–10797

Move the alternator until the belt has 5/16 inch (8,0 mm) movement at the middle of the belt span with 15 lbs. (66N) of force (Item 1) [B].

B

Dealer Copy -- Not for Resale

Tighten the adjustment and mounting bolts.

1

P–10807

84 of 120

64

864, 864H Bobcat Loader Operation & Maintenance Manual

TIMING BELT

A

The timing belt (Item 1) [A] MUST be replaced every 3,000 hours or every 5 years.

See your Bobcat dealer for this service.

1

P–05298

B

DRIVE BELT 7.

Adjusting The Drive Belt

2

The drive belt idler arm stop is located on the left side of the engine below the air cleaner [B].

There is no adjustment for the spring, just make sure the spring bolt (Item 2) [B] is tight.

P–05554

Dealer Copy -- Not for Resale

1

Loosen the two bolts (Item 1)[B] and slide the stop against the idler arm. Tighten the bolts.

P–10805

85 of 120

65

864, 864H Bobcat Loader Operation & Maintenance Manual

DRIVE BELT (Cont’d)

A

Replacing The Drive Belt Stop the engine.

Open the rear door.

2

Remove the three belt shield fasteners (Item 1) [A]. The fasteners can be more easily removed if you remove the end of the fastener from the cast housing first then remove from the cover.

Remove the belt shield (Item 2) housing.

1

[A] from the drive belt P–10814

Loosen the two stop mounting bolts (Item 1) [B].

B

Loosen the spring tension bolt (Item 2) [B].

1

Remove the fan drive belt from the tensioner pulley.

P–10805

Remove the drive belt (Item 1) [C].

C

Install new drive belt and adjust the drive belt idler arm stop (See Adjusting The Drive Belt Page 65.)

1 P–10804

86 of 120

66

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

2

ELECTRICAL SYSTEM

A

Description The loader has a 12 volt, negative ground alternator charging system. The electrical system is protected by fuses located in the engine compartment. The fuses will protect the electrical system when there is an electrical overload. The reason for the overload must be found before starting the engine again.

Servicing The Electrical System The battery cables must be clean and connections tight.

Check the water level in the battery.

Add distilled water as needed.

P–00742

Remove any acid or corrosion from the battery and cables with a sodium bicarbonate and water solution [A].

B

Cover the battery terminals and cable ends with grease.

2

Batteries contain acid which burns eyes and skin on contact. Wear goggles, protective clothing and rubber gloves to keep acid off body.

In case of acid contact, wash immediately with water. In case of eye contact get prompt medical attention and wash eye with clean, cool water for at least 15 minutes.

N–17636

C

If electrolyte is taken internally drink large quantities of water or milk! DO NOT induce vomiting. Get prompt medical attention.

W–2065–1296

Dealer Copy -- Not for Resale

1

Fuse Location The electrical system for this model loader is protected by fuses (Item 1) [B] located at the right side of the engine.

Remove the covers from the fuse holders (Item 1) [C] to access the fuses.

P–13771

The fuse capacity and circuits are shown on the decal (Item 2) [B] and below.

Fuse Capacity

Circuit

10 AMP. 15 AMP. 10 AMP. 15 AMP. or (25 AMP*.)

25 AMP. 25 AMP. 25 AMP. 25 AMP.

BICS™ Engine BOSS® (If Equipped) P.W.M. (or AHC*) (If Equipped) Lights Brake Accessory Accessory

87 of 120

67

864, 864H Bobcat Loader Operation & Maintenance Manual

ELECTRICAL SYSTEM (Cont’d)

A

Using A Booster Battery (Jump Starting) If it is necessary to use a booster battery to start the engine, BE CAREFUL! There must be one person in the operator’s seat and one person to connect and disconnect the battery cables.

2 4

The key switch must be in the OFF position. The booster battery must be 12 volt.

P–10813

Batteries contain acid which burns eyes and skin on contact. Wear goggles, protective clothing and rubber gloves to keep acid off body.

1

In case of acid contact, wash immediately with water. In case of eye contact get prompt medical attention and wash eye with clean, cool water for at least 15 minutes.

If electrolyte is taken internally drink large quantities of water or milk! DO NOT induce vomiting. Get prompt medical attention.

W–2065–1296

N–17977

Keep arcs, sparks, flames and lighted tobacco away from batteries. When jumping from booster battery make final connection (negative) at engine frame.

Damage to the alternator can occur if: Do not jump start or charge a frozen or damaged battery. Warm battery to 60°F. (16°C.) before connecting to a charger. Unplug charger before connecting or disconnecting cables to battery.

Never lean over battery while boosting, testing or charging.

• Engine is operated with battery cables disconnected.

• Battery cables are connected when using a

fast charger or when welding on the loader (Remove both cables from the battery).

• Extra battery cables (booster cables) are connected wrong.

Battery gas can explode and cause serious injury.

I–2023–1285

W–2066–1296

Connect the end of the first cable (Item 1)[A] to the positive (+) terminal of the booster battery. Connect the other end of the same cable (Item 2) [A] to the positive terminal on the starter.

Connect the end of the second cable (Item 3) [A] to the negative (–) terminal of the booster battery . Connect the other end of the same cable (Item 4)[A] to the ground cable connection on the engine mounting bracket.

Keep cables away from moving parts. Start the engine After the engine has started, remove the ground (–) cable (Item 4) [A] first. Remove the cable from the positive terminal on the starter.

88 of 120

68

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

3

ELECTRICAL SYSTEM (Cont’d)

A

Removing And Installing The Battery

1

2 Batteries contain acid which burns eyes and skin on contact. Wear goggles, protective clothing and rubber gloves to keep acid off body.

In case of acid contact, wash immediately with water. In case of eye contact get prompt medical attention and wash eye with clean, cool water for at least 15 minutes.

P–10809

B

If electrolyte is taken internally drink large quantities of water or milk! DO NOT induce vomiting. Get prompt medical attention.

1

W–2065–1296

Disconnect the negative (–) cable (Item 1) battery.

[A] from the

Disconnect the main frame ground bolt and cable clamp (Item 2) [A] P–10809

Remove the battery hold down clamp (Item 1) [B].

Disconnect the positive (+) cable (Item 1) battery.

C

[C] from the

1

Remove the battery from the loader.

Dealer Copy -- Not for Resale

Open the rear door.

P–10806

89 of 120

69

864, 864H Bobcat Loader Operation & Maintenance Manual

ELECTRICAL SYSTEM (Cont’d)

A

Removing And Installing The Battery (Cont’d) Always clean the terminals and cable ends when installing a new battery [A].

When installing the battery in the loader, do not touch any metal parts with the battery terminals.

Connect and tighten the battery cables.

Install cable clamp and ground bolt (Item 1) [B] as shown for correct ground and cable routing.

Connect the negative (–) cable last to prevent sparks.

P–09589

P–09590

B

1

Do not jump start or charge a frozen or damaged battery. Warm battery to 60°F. (16°C.) before connecting to a charger. Unplug charger before connecting or disconnecting cables to battery.

Never lean over battery while boosting, testing or charging.

P–10814

Battery gas can explode and cause serious injury.

W–2066–1296

C FAN GEARBOX

1

Checking And Maintaining See the SERVICE SCHEDULE Page 43 for the correct service interval.

Gear Lube Level

Raise the operator cab. (See Raising the Operator Cab Page 44.)

Remove the plug (Item 1) [C] to check the lubricant level.

When maintaining the gearbox lube level, make sure the level does not go above the center line of the shaft in the gearbox [C]. Use SAE 90W gear lube if the level is low.

90 of 120

P–07616

70

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Keep arcs, sparks, flames and lighted tobacco away from batteries. When jumping from booster battery make final connection (negative) at engine frame.

HYDRAULIC/HYDROSTATIC SYSTEM

A

Checking And Adding Fluid Use only recommended fluid in the hydraulic system. (See SPECIFICATIONS Section Page NO TAG.) Stop the loader on a level surface. Lower the lift arms and tilt the Bob–Tach fully back.

2

Stop the engine.

Remove the dipstick (Item 1) [A].

1

The fluid level must be between the marks on the dipstick [B].

P–07671

If fluid is needed, remove the fill cap (Item 2) [A].

P–07673

Replacing the Hydraulic/Hydrostatic Filter 8.

See the SERVICE SCHEDULE Page 43 for the correct service interval.

C

Raise the operator cab. (See Raising the Operator Cab Page 44.)

Dealer Copy -- Not for Resale

B

Add the fluid as needed to bring the level to the top mark on the dipstick [B]. Do not overfill.

Remove the filter element (Item 1) [C].

Clean the surface of the filter housing where the element seal contacts the housing. Put clean oil on the rubber seal of the filter element.

Install and hand tighten the filter element.

1 N–18289

91 of 120

71

864, 864H Bobcat Loader Operation & Maintenance Manual

HYDRAULIC/HYDROSTATIC SYSTEM (Cont’d)

A

Replacing The Hydraulic Fluid See the SERVICE SCHEDULE Page 43 for the correct service interval.

Replace the fluid if it becomes contaminated or after major repair.

Remove the fill cap. Remove the screen from the reservoir [A]. Wash the screen in clean solvent and air dry.

NOTE: Be sure the rubber gasket is installed on the fill cap.

Also replace the two hydrostatic motor case drain thoroughly after a major repair.

filters

P–07672

Raise the cab. (See Raising the Operator Cab Page 44.)

B

Disconnect the hose (Item 1) [B] from the hydraulic fluid reservoir and drain the fluid into a container.

Install the case drain filters and tighten all the hoses.

1

Replace the two hydraulic/hydrostatic filter elements.(See Page 71.)

Add the correct fluid to the reservoir until the fluid level is between the marks on the dipstick. (See Page 71.) DO NOT fill above the top mark on the dipstick.

N–18100

C

RIGHT CASE DRAIN FILTER

Hydraulic fluid escaping under pressure can have sufficient force to enter a person’s body by penetrating the skin and cause serious injury and possibly death if proper medical treatment by a physician familiar with this injury is not received immediately.

W–2145–0290

Always clean up spilled fuel or oil. Keep heat, flames, sparks or lighted tobacco away from fuel and oil. Failure to use care around combustibles can cause explosion or fire which can result in injury or death.

1 N–18100

D

W–2103–1285

LEFT CASE DRAIN FILTER

Lower the cab. (See Lowering The Operator Cab, Page 45.)

Start the engine and operate the loader hydraulic controls.

Stop the engine and check for leaks.

1

Check the fluid level in the reservoir and add as needed.

N–18099 92 of 120

72

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Replace both hydrostatic motor case drain filters (Item 1) [C] & [D].

HYDRAULIC/HYDROSTATIC SYSTEM (Cont’d)

A

Hydraulic Reservoir Breather Cap See SERVICE SCHEDULE Page 43 forthe correct service interval.

1

Remove the breather cap (Item 1) [A].

P–05080

NOTE: Check to make sure the rubber gasket (Item 1) [B] is installed on the fill cap.

B 1

Clean the filter (Item 2) [B] in the breather cap.

Make sure the baffle washer (Item 3) [B] is installed in the hydraulic reservoir.

Replace the breather cap if it is worn or damaged, or beyond the 500 hour service life.

2 P–01502

93 of 120

73

P–01497

Dealer Copy -- Not for Resale

3

864, 864H Bobcat Loader Operation & Maintenance Manual

HYDROSTATIC MOTOR CARRIER OIL

A

See the SERVICE SCHEDULE, Page 43 for the correct interval.

Removing And Replacing Oil Park the loader so that the plug in the hydrostatic motor carrier is at the bottom.

Remove the plug and let the oil drain from the motor carrier .

Rotate the motor carrier so that the plug is horizontal with the center of the motor carrier (Inset) [A]. Add oil as necessary until it flows from the hole.

Install and tighten plug to 17 ft.lbs. (23 Nm) torque.

N–18059

Repeat for the other hydrostatic motor carrier.

TRACK ROLLER AND IDLER LUBRICATION

B

The four track rollers and eight idlers have an oil reservoir for bearing lubrication.

2 1

See the SERVICE SCHEDULE, Page 43 for the correct interval.

Remove the plug (Item 1 or 2) [B] and rotate the roller (or idler) to drain the oil.

Rollers: Add 0.07oz. (70 cc) of oil (SAE 10W–40) to the rollers (two on each side of loader).

Idlers: Add 0.10oz. (100 cc) (SAE 10W–40) of oil to the idlers (four on each side of loader.

B–15509

B–15508

Install and tighten plug to 17 ft.lbs. (23 Nm) torque.

N–18059

94 of 120

74

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Removing And Replacing Oil

LUBRICATION OF THE BOBCAT LOADER

A

9.

Lubricate the loader as specified in the SERVICE SCHEDULE Page 43 for the best performance of the loader.

Record the operating hours each time you lubricate the Bobcat loader.

1

Always use a good quality lithium based multi–purpose grease when you lubricate the loader. Apply the lubricant until extra grease shows.

Lubricate the following locations on the loader: 1. Rod End Lift Cylinder (Both Sides) [A].

P–07655

2. Base End Lift Cylinder (Both Sides) [B].

2

N–18068

3. Lift Arm Pivot Pin (Both Sides) [C].

C

3

Dealer Copy -- Not for Resale

B

P–10817

D

4. Base End Tilt Cylinder [D].

4

P–07641 95 of 120

75

864, 864H Bobcat Loader Operation & Maintenance Manual

LUBRICATION OF THE BOBCAT LOADER (Cont’d)

A

5. Rod End Tilt Cylinder [A].

6. Bob–Tach Pivot Pin (Both Sides) [A].

7. Bob–Tach Wedge (Both Sides) [A].

5 6 7

N–18266

8. 250 Hours: Steering Lever Shaft (2) [B].

B

864/864H BICSOperation&MaintenanceManual#6900626–PreventiveMaintenanceSection

P–13815

96 of 120

76

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

8

SYSTEMS ANALYSIS 9.

ADVANCED HAND CONTROLS Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 ...

AUXILIARY HYDRAULICS OPERATION Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 ...

BOBCAT INTERLOCK CONTROL SYSTEM (BICS™) Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 ...

SERVICE CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 ....

Dealer Copy -- Not for Resale

SYSTEMS ANALYSIS

97 of 120

77

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 98 of 120

78

864, 864H Bobcat Loader Operation & Maintenance Manual

SERVICE CODES 10.

The following list references the defect codes that are transmitted to the instrument panel display which can occur. Some service procedures for correcting the problems can be found in this manual and other procedures must be performed ONL Y BY QUALIFIED BOBCAT SERVICE PERSONNEL.

Instructions are necessary before operating or servicing machine. Read and understand the Operation & Maintenance Manual, Handbook and signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing.

Check for correct function after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death.

W–2003–0199

SERVICE CODES DISPLAY READS

CONDITION

Engine Coolant Level

ECL 1

SHUTDOWN, No Coolant

Engine Coolant Temp.

EC–1.1

SHUTDOWN, Engine Temperature

EC–2.1

WARNING, Engine Temperature

EC 3

Wiring Not Connected

EC 4

Wiring Shorted

EC 5

High Sensor Voltage

EC 7

Sensor Out Of Range

EP 1

SHUTDOWN, Pressure

EP 2

WARNING, Pressure

EP 3

Wiring Not Connected

EP 4

Wiring Shorted

EP 5

High Sensor Voltage

EP 7

Sensor Out Of Range

ES 1

SHUTDOWN, Engine Speed Too High

ES–2.1

WARNING, Engine Speed Slightly High

ES–6

Sensor No Signal

ES–7

Sensor Out Of Range

AF 2

WARNING, Restriction Too High

AF 6

Sensor No Signal

b–2.1

WARNING, Bad Battery

b–2.2

WARNING, Battery Voltage

FUEL2

WARNING, Low Level

FUEL3

Wiring Not Connected

FUEL4

Wiring Shorted

FUEL5

High Sensor Voltage

FUEL7

Sensor Out Of Range

Engine Oil Pressure

Engine Speed

Air Filter Battery Fuel Level

99 of 120

79

Dealer Copy -- Not for Resale

SUBJECT

864, 864H Bobcat Loader Operation & Maintenance Manual

SERVICE CODES SUBJECT Hydrostatic Charge Filter Conditions

DISPLAY READS

CONDITION WARNING, High Restriction (1st Filter)

HF1–6

Sensor No Signal

Return Filter Condition

HF2–2

WARNING, High Restriction

(853, 863, 864, 873 Only)

HF2–6

Sensor No Signal

Hydrostatic Fluid

HP 1

SHUTDOWN, Pressure

HP 2

WARNING, Pressure

HP 3

Wiring Not Connected

HP 4

Wiring Shorted

HP 5

High Sensor Voltage

HP 7

Sensor Out Of Range

HC 1

SHUTDOWN, Temperature

HC 2

WARNING, Temperature

HC 3

Wiring Not Connected

HC 4

Wiring Shorted

HC 5

High Sensor Voltage

HC 7

Sensor Out Of Range

Hydrostatic Fluid Temperature

Dealer Copy -- Not for Resale

HF1–2

AUXILIARY HYDRAULICS OPERATION Troubleshooting Chart 11.

The Auxiliary Hydraulics Control has a built–in diagnostics function.

1

The two lights will blink in a specific pattern to indicate a problem (See Below).

2 P–3272

INDICATIONS Blinking Momentary Light (Item 1) Detent Light (Item 2) Problem Causes

Check

Off

Blinking

X

Off X

X Base Solenoid

X Rod Solenoid

Blinking

Off

Blinking

X

X

At same time

Alternating

X

X

Diverter Solenoid

Wires Disconnected, Wires Shorted or Wires Cut Solenoid Failed

Check for voltage (1–10 volts) at the solenoid connector.

Off

Right Handle Spring in the thumb switch is broken Check for the thumb switch in centered position. Check for voltage to Dk. Blue & Dk. Blue/White wires.

NOTE: Check all of the above first. Any of the above can also indicate a problem with the Auxiliary Control Module. See your Bobcat dealer for module replacement.

100 of 120

80

864, 864H Bobcat Loader Operation & Maintenance Manual

BOBCAT INTERLOCK CONTROL SYSTEM (BICS™) 12.

Troubleshooting Chart 864/864H BICSOperation&MaintenanceManual#6900626–SystemsAnalysisSection

The following list shows the effects which can happen to the loader, and the probable causes when the BICS Controller lights are off or flashing. Have service procedures performed ONLY BY QUALIFIED BOBCAT SERVICE PERSONNEL.

System Activated

Seat Bar

Light ON PRESS OPERATE button activated

Light OFF TO is

Seat bar down

Effect on Operation of Loader When Light is OFF

PRESS TO OPERATED button is not activated

Lift, tilt and traction functions will not operate.

Seat bar up.

Lift, tilt and traction functions will not operate.

Flashing Indicator Means System Problem (See Your bobcat Dealer for Service) Number of Flashes

6

System Activated circuit shorted to battery voltage.* System Activated circuit shorted to ground.

Seat bar sensor circuitshorted to battery voltage*.

Seat bar sensor circuit shorted to ground.

Valve output circuit shorted to battery voltage*.

Valve output circuit shorted to ground.

Valve output circuit is not grounded.

Traction lock hold coil circuit is open.

Traction lock hold coil circuit shorted to battery voltage*.

Traction lock hold coil circuit shorted to ground.

Traction lock pull coil circuit is open.

Traction lock pull coil circuit is shorted to battery voltage*.

Traction lock pull coil circuit is shorted to ground.

N/A

N/A

2 3 2 3

Valve

Traction

Control valve can be used

Loader can be moved forward and backward

Control valve cannot be used

Loader cannot be moved forward and backward

Lift and tilt functions will not operate.

Loader cannot be moved forward and backward.

2 3 3 1 2 3 4 5

Power

BICS Controller is operating correctly.

BICS Controller is not operating correctly.

Lift, tilt and traction function will not operate.

Cause

Dealer Copy -- Not for Resale

Indicator Light

* Normal BICS operating voltage is less than the electrical system voltage. If voltage is more, the circuit is shorted to system voltage.

NOTES: (1) If the System Activated and/or seat bar sensor circuits are open, the corresponding lights will be OFF. If one of the lights stay OFF, check the circuit for continuity. See Inspection & Maintenance Instructions in Preventive Maintenance section.

(2) If all five lights flash repeatedly, the voltage supply is greater than 16 volts or less than 9 volts.

(3) Flashing patterns will repeat every 3.25 seconds.

101 of 120

81

864, 864H Bobcat Loader Operation & Maintenance Manual

ADVANCED HAND CONTROLS (AHC) Troubleshooting Chart The AHC has a built–in diagnostic function which uses the two lights on the left handle.

Both lights will be ON when the AHC is functioning correctly. The lights will flash in a specific pattern to indicate a problem (See Below). (See your Bobcat dealer for service information.)

Number of Flashes Left Hand Light (Lift Circuit) Right Hand Light (Tilt Circuit)

1 Handle Not Calibrated

FLASHING LIGHT MEANS SYSTEM PROBLEM (See Your Bobcat Dealer for Service) 2 3 4 Actuator Not Calibrated

Wiring Fault (Handle)

Wiring Fault (Actuator)

5 Actuator Fault

Dealer Copy -- Not for Resale

NOTE: Flashing patterns will repeat every six seconds. One blink will occur if Right or Left Hand Control is not in neutral position before key is turned ON or engine is started and green PRESS TO OPERATE button is activated.

102 of 120

82

864, 864H Bobcat Loader Operation & Maintenance Manual

MACHINE SIGN TRANSLATIONS 13.

IMPORTANT (6710456) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 ...

SERVICE SCHEDULE (6715563) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86 ..

WARNING (6579510 – Foot Pedal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 ..

WARNING (6703725 – Hand Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89 ..

WARNING (6579528, 6577754, 6702301, 6702302) . . . . . . . . . . . . . . . . . . 90 .

WARNING (6715944) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 ....

Dealer Copy -- Not for Resale

DANGER (6717343) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 ....

MACHINE SIGN TRANSLATIONS

103 of 120

83

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 104 of 120

84

864, 864H Bobcat Loader Operation & Maintenance Manual

IMPORTANTE (SPANISH) 863/864 ESTE MODELO DE CARGADOR VIENNE EQUIPADO DE FÁBRICA CON UN SISTEMA DE ESCAPE CON DISPOSITIVO PARACHISPAS APROBADO POR EL SERVICIO FORESTAL DEL MINISTERIO DE AGRICULTURA DE LOS ESTADOS UNIDOS.

863/864

EL TURBOALIMENTADOR DEBE ESTAR FUNCIONANDO PARA MANTENER OPERANDO EL SISTEMA DE ESCAPE CON DISPOSITIVO PARACHISPAS. SI SE OPERA ESTA MÁQUINA EN BOSQUES INFLAMABLES, MATORRALES O TERRENOS CUBIERTOS DE PASTOS, ÉSTA DEBE ESTAR EQUIPADA CON UN DISPOSITIVO PARACHISPAS CONECTADO AL SISTEMA DE ESCAPE Y DEBE MANTENERSE EN BUENAS

Dealer Copy -- Not for Resale

CONDICIONES DE FUNCIONAMIENTO. EL NO HAVERLO CONSTITUYE UNA VIOLACIÓN A LA LEY DEL ESTADO DE CALIFORNIA, SECCIÓN 4442. PRC. CONSULTE LAS LEYES Y REGULACIONES LOCALES SOBRE REQUISITOS RELACIONADOS CON LOS DISPOSITIVOS PARACHISPAS. PARA MAS INSTRUCCIONES, CONSULTE EL MANUAL DE OPERACIÓN Y MANTENIMIENTO.

IMPORTANT (FRENCH) 863/864 LE SYSTÈME D’ÉCHAPPEMENT DE CETTE CHARGEUSE EST ÉQUIPÉ D’UN P ARA–ÉTINCELLES INSTALLÉ EN USINE ET APPROUVÉ PAR LE SERVICE DES FORÊTS DU DÉPARTMENT DE L’AGRICULTURE DES ÉTATS–UNIS (U.S.D.A. FORESTRY SERVICE).

LE TURBOCOMPRESSEUR DOIT ÊTRE EN BON ÉTAT DE MARCHE POUR QUE LE SYSTÈME D’ÉCHAPPEMENT ÀP ARE–ÉTINCELLE FONCTIONNE. SI CETTE MACHINE EST UTILISÉE SUR UN TERRAIN COUVERT D’ARBRES, DE BROUSSAILLES, OU D’HERBAGES INFLAMMABLES, SON SYSTÈME D’ÉCHAPPEMENT DOIT ÊTRE ÉQUIPÉD D’UN PARE–ÉTINCELLE ET MAINTENU EN BON ÉTAT DE FONCTIONNEMENT. CETTE EXIGENCE EST IMPOSÉE PAR LA LOI DE L’ÉTAT DE LA CALIFORNIE, SECTION 4442. PRC. CONSULTER LA RÉGLEMENT ATION LOCALE RELATIVE AUX PARE–ÉTINCELLES. CONSULTER LE MANUEL DE L’OPÉRATEUR ET D’ENTRETIEN POUR DE PLUS AMPLES RENSEIGNEMENTS.

105 of 120

85

864, 864H Bobcat Loader Operation & Maintenance Manual

EVITE LESIONES O LA MUERTE

• Mantenga la puerta cerrada excepto durante tareas de mantenimiento

• Mantenga el motor libre de material inflamable • Mantenga el cuerpo, objetos sueltos y la vestimenta alejadosde

• FILTRO DEL COMBUSTIBLE – quite el agua atrapada.

• BRAZO DE ELEVACIÓN DE LA CARGADORA, UNIONES DE •

contactos eléctricos, partes móviles, partes calientes y escapes. •

• No utilice la cargadora en un espacio con polvos o gases explosivos o con material inflamable cerca de un escape.

• Todos los gases de escape puede provocar la muerte. Siempre • ventile.

• Jamás utilice éter o fluidos de arranque en un motor diesel con • • • •

bujías incandescentes. Utilice sólo dispositivos de arranque • aprobados por el fabricante del motor.

Los fluidos que gotean bajo presión pueden penetrar en la piel y provocar lesiones graves. En ese caso, obtenga asistencia médica inmediata. Utilice anteojos de seguridad. Utilice untrozo CADA 50 HORAS de cartón al verificar la existencia de fugas.

Los ácidos de la batería ocasionan quemaduras graves, utilice • FLUIDO HIDRÁULICO, MANGUERAS Y TUBERÍA – revise el nivel del fluido. Verifique que no existan daños o fugas. Repare anteojos de seguridad. Si el ácido entra en contacto con los ojos, o cambie según sea necesario. la piel o la vestimenta, enjuague bien con agua. En caso de contacto con los ojos, enjuague y obtenga asistencia médica.

• TRANSMISIÓN DE DIRECCIÓN FINAL (caja de cadenas) – Las baterías producen gases explosivos e inflamables. Aleje revise el nivel del fluido. arcos, chispas, llamas y tabaco encendido.

• CONTROLES HIDRÁULICOS (PEDALES O CONTROLES Para arranque en puente, conecte el cable negativo al motorde MANUALES) Y PALANCAS DE DIRECCIÓN – revise la la cargadora en último lugar (jamás en la batería). Luego del operación. Ajuste según sea necesario. arranque en puente, quite la conexión negativa del motor • TUERCAS DE LAS RUEDAS – revise que no existan tuercas primero. sueltas y ajuste según lo indicado en el manual de operación y mantenimiento.

PROGRAMA DE MANTENIMIENTO (SPANISH) CADA 10 HORAS (ANTES DE ARRANCAR LA CARGADORA)

• ACEITE DEL MOTOR – revise el nivel y agregue según sea • • •

ELEVACIÓN, CILINDROS, PIVOTES Y CUÑAS DEL ENGANCHE RÁPIDO – lubrique con grasa multiuso a base de litio.

CINTURÓN DE SEGURIDAD, BARRA DE SEGURIDAD Y ENGANCHES DE CONTROL– revise las funciones. Repare o cambie según sea necesario. Limpie las partes móviles.

BICSMR – revise la función. Elimine desperdicios, suciedad u objetos debajo y/o detrás del asiento del operador según sea necesario.

NEUMÁTICOS – verifique la presión de aire. Infle los neumáticos con la presión MÁXIMA que se indica en la pared lateral del neumático.

GENERAL – verifique que no existan partes sueltas o rotas, que la cabina del operador no presente daños, revise la operación de los instrumentos, la existencia de tuercas sueltas, fugas de aceite, rótulos de seguridad dañados o faltantes. Repare o cambie según sea necesario.

necesario. No lo llene en exceso.

FILTRO DE AIRE DEL MOTOR – revise el indicador y/o el visor .

Repare sólo en caso de ser necesario.

SISTEMA DE AIRE DEL MOTOR – verifique que no existan fugas o componentes dañados.

SISTEMA DE REFRIGERACIÓN DEL MOTOR – limpie el refrigerador de aceite y las parrillas.

MODELOS 500 Y 700 – revise el nivel delfluido refrigerante frío, agregue 53% de propilenglicol premezclado con 47% de agua según sea necesario.

106 of 120

CADA 100 HORAS

• SILENCIADOR DEL SISTEMA PARACHISPAS – en los modelos 500 y 700 solamente. Vacíe la cámara de chispas.

• BATERÍA – verifique que la batería no presente daños, revise las abrazaderas, las conexiones de los cables y el nivel de electrolito. Agregue agua destilada según sea necesario.

CADA 250 HORAS (O CADA 12 MESES)

• PIVOTES DE LA PALANCA DE DIRECCIÓN – lubrique con grasa multiuso a base de litio (3 lugares).

• CORREA DE DESPLAZAMIENTO DE TRANSMISIÓN –

modelos 700. Verifique que no se encuentre gastada odañada.

Ajuste o cambie según sea necesario. *Revise las correas de desplazamiento cambiadas después de 50 horas de operación y ajústelas según sea necesario.

86

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

ADVERTENCIA (SPANISH)

• LÍNEA DE DESPLAZAMIENTO – modelos 500 solamente.

• • •

• FILTRE À CARBURANT – Éliminez l’eau retenue.

Lubrique la junta U. • ENGRANAJE DEL VENTILADOR – revise el nivel del fluido.

Revise todas las correas de desplazamiento. Revise el estado y la tensión de la bomba hidrostática y de agua, el alternador y • el desplazamiento del ventilador. Ajuste o cambie según sea necesario.

BICSMR – revise el control de desvío de los brazos de elevación.

CADA 500 HORAS (O CADA 12 MESES)

• SISTEMA HIDRÁULICO/HIDROSTÁTICO – cambie la tapa del respiradero del depósito.

CADA 1000 HORAS (O CADA 12 MESES)

• DEPÓSITO HIDRÁULICO – cambie el fluido.

• TRANSMISIÓN DE DIRECCIÓN FINAL (CAJA DE CADENAS)

• • •

– cambie el fluido.

AVERTISSEMENT (FRENCH) ÉVITEZ DES BLESSURES OU LA MORT

BRAS DE LEVAGE, AXES DE LEVAGE, VÉRINS, PIVOTS BOBTACH ET CLAVETTES – Lubrifiez avec une graisse àbase de lithium de type universel.

CEINTURE DE SÉCURITÉ, ARCEAU DE SÉCURITÉ ET ENCLENCHEMENTS SOLIDAIRES – Vérifiez leur bon fonctionnement. Réparez ou remplacez au besoin.Débarrassez les pièces mobiles de toute saleté et de tous débris.

BICSt – Vérifiez le bon fonctionnement. Débarrassez le dessous /ou l’arrière du siège de l’opérateur de tous débris, saletés et objets divers, le cas échéant.

PNEUS – Vérifiez la pression d’air . Gonflez à la valeur de pression MAXIMALE qui est indiquée sur le flanc du pneu.

GÉNÉRAL – Vérifiez si des pièces sont desserrées ou brisées, si la cabine de l’opérateur est en bon état, si les instruments fonctionnent correctement, si les écrous de roue sont bien serrés, s’il y a fuites d’huile, si des enseignes de sécurité sont endommagées ou ont été arrachées. Réparez ou remplacezau besoin.

TOUTES LES 50 HEURES

• FLUIDE

• Gardez la portière fermée, sauf en cas d’intervention de service. • • Gardez la région du moteur exempte de matières inflammables.

• Gardez toute partie du corps, tout objet lâche et toute pièce de •

HYDRAULIQUE, TUYAUX SOUPLES ET TUBULURES – Vérifiez le niveau du fluide. Vérifiez s’il y a dommages et fuites. Réparez ou remplacez au besoin.

TRANSMISSION FINALE (CARTER GARDE–CHAÎNE) – Vérifiez le niveau de liquide à transmission.

COMMANDES HYDRAULIQUES (À PÉDALE OU MANUELLES) ET DIRECTION – Vérifiez le bon fonctionnement. Réglez au besoin. ÉCROUS DE ROUE – Vérifiez si des écrous de roue sont desserrés et, le cas échéant, resserrez suivant les indications du Manuel de l’opérateur et d’entretien.

Dealer Copy -- Not for Resale

vêtement à l’écart des points de contact électrique, des pièces en mouvement, des parties chaudes et de l’échappement.

• N’utilisez pas la chargeuse dans des espaces contenant des • poussières explosives, des gaz explosifs ou des matières inflammables pouvant se trouver à proximité de l’échappement.

• Tous les gaz d’échappement peuvent être mortels. Prévoyez TOUTES LES 100 HEURES toujours une ventilation.

• SILENCIEUX PARE–ÉTINCELLES – Modèles 500 et 700 • N’utilisez jamais d’éther ni de fluide de démarrage avec un seulement – Videz la chambre d’étincelles. moteur diesel comportant des bougies de préchauf fage.

• BATTERIE – Vérifiez si la batterie est endommagée; vérifiez les N’utilisez que des auxiliaires de démarrage approuvés par le fabricant du moteur. dispositifs de retenue, les câbles, les connexions ainsi que le niveau d’électrolyte. Ajoutez de l’eau distillée au besoin.

• Des fluides qui fuient sous pression peuvent pénétrer la peauet provoquer de graves lésions.

Consultez un médecin TOUTES LES 250 HEURES (OU TOUS LES 12 immédiatement. Portez des lunettes de protection. Utilisez des MOIS) morceaux de carton pour vérifier toute fuite.

• AXES DE LEVIER DE DIRECTION – Lubrifiez (trois points de • L’acide que contiennent les batteries provoque de graves graissage) avec une graisse à base de lithium de type universel. brûlures; portez des lunettes de protection. En cas de contact avec les yeux, la peau ou les vêtements, rincez à grande eau. • COURROIE DE TRANSMISSION – Modèles 700– Vérifiez l’état S’il y a eu contact avec les yeux, rincez à fond et consultez un d’usure et d’endommagement. Réglez ouremplacez au besoin. médecin. *Vérifiez toute nouvelle courroie de transmission au bout de 50 heures de service, et réglez–la au besoin.

• Les batteries produisent des gaz inflammables et explosifs.

Tenez à distance toute source d’arcs électriques, d’étincelles et • ARBRE DE TRANSMISSION – Modèles 500 seulement – de flammes, ainsi que tout produit de tabac allumé.

Lubrifiez le joint universel.

• Pour effectuer des démarrages avec câbles d’appoint, reliez en • CARTER D’ENGRENAGES D’ENTRAÎNEMENT DU dernier le câble négatif au moteur de la chargeuse (jamais à la VENTILATEUR – Vérifiez le niveau d’huile. batterie). Après le démarrage, enlevez d’abord la connexion • Vérifiez tous les entraînements par courroie. Vérifiez l’état et la négative au moteur. tension des entraînements de pompe hydrostatique, de pompe à eau, d’alternateur et de ventilateur. Réglez ou remplacez au besoin.

CALENDRIER D’ENTRETIEN (FRENCH) • BICSt – Vérifiez la commande de dérivation du bras de levage.

TOUTES LES 10 HEURES (AVANT DE DÉMARRER LA CHARGEUSE)

• HUILE MOTEUR – Vérifiez le niveau, et faites l’appoint au • • •

TOUTES LES 500 HEURES (OU TOUS LES 12 MOIS)

• SYSTÈME HYDRAULIQUE/HYDROSTATIQUE – Remplacez besoin. Évitez de remplir à l’excès. le chapeau de reniflard du réservoir.

FILTRE À AIR DU MOTEUR – Vérifiez la jauge /ou l’affichage.

TOUTES LES 1000 HEURES (OU TOUS LES 12 N’effectuez d’entretien que si nécessaire.

CIRCUIT D’AIR DU MOTEUR – Vérifiez s’il y a des fuites et si MOIS) des composants sont endommagés.

• RÉSERVOIR HYDRAULIQUE – Remplacez le fluide CIRCUIT DE REFROIDISSEMENT DU MOTEUR – hydraulique.

Débarrassez le refroidisseur d’huile et les grillages de tous • TRANSMISSION FINALE (CARTER GARDE-CHAÎNE) – débris.

Remplacez le liquide à transmission.

Modèles 500 et 700 – Vérifiez le niveau de liquide de refroidissement, à froid; ajoutez au besoin un mélange préparé constitué de 53 p. 100 de propylène glycol et de 47 p. 100 d’eau.

107 of 120

87

864, 864H Bobcat Loader Operation & Maintenance Manual

Commande au pied seulement

ADVERTENCIA (SPANISH)

ATTENTION (FRENCH)

EVITE HERIDAS O LA MUERTE

EVITER LES BLESSURES OU LA MORT

NO USE NUNCA EL CARGADOR SIN LEER LAS INSTRUCCIONES. LEA EL MANUAL DEL OPERA TIO, EL MANUAL DE SERVICIO Y LA GIA DEL OPERARIO.

NE JAMAIS SE SER VIR DE LA CHARGEUSE SANS INSTRUCTIONS. LIRE LE MANUEL DE L’OPERATEUR EL D’ENTRETIEN AINSI QUE LE GUIDE D’UTILISATION.

NO VIAJE O DE LA VUEL TA CON LOS BRAZOS DE ELEVACION ARRIBA. CARGUE, DESCARGUE Y DE LA VUELTA ESTANDO EN UN SITIO PLANO Y NIVELADO. NO EXCEDA LA CAP ACIDAD NOMINAL DE FUNCIONAMIENTO (VEA EL A VISO EN EL CARGADOR).

NE PAS SE DEPLACER NI VIRER AVEC LE BRAS RELEVES. CHARGER, DECHARGER ET VIRER SUR UN SOL PLA T ET HORIZONTAL. NE PAS DEPASSER LE CAP ACITE NOMINALE (CONSULTER L’AUTOCOLLANT APPOSE SUR LA CARGEUSE).

USE LA BARRA DEL ASIENTO. ASEGURESE BIEN EL CINTURON DE SEGURIDAD.

UTILISER L’ARCEAU DE SECURITE. ATTACHER SOIGNEUSEMENT LA CEINTURE DE SECURITE.

NUNCA MODIFIQUE EL EQUIPO NI USE ADITAMENTOS QUE NO ESTEN APROBADOS POR LA COMPAÑIA BOBCAT.

NE JAMAIS MODIFIER L’EQUIPEMENT NI SE SERVIR D’ACCESSOIRES QUE NE SONT P AS APPROUVES PAR BOBCAT COMPANY.

MANTENGA LOS PIES EN LOS PEDALES.

MAINTENIR LES PIEDS SUR LES PEDALES.

EN LA PENDIENTES, MANTENGA EL EXTREMO PESADO DE CARGADOR EN POSICION ASCENDENTE.

DANS LES PENTES, T OUJOURS MAINTENIR LA PARTIE LA PLUS LOURDE DE LA CHARGEUSE VERS LE HAUT.

ANTES DE BAJARSE DEL CARGADOR POUR QUITTER LA CHARGEUSE:

1. BAJE LOS BRAZOS DE ELEVACION. COLOQUE EL ADITAMENTO BEIN EN EL SUELO. 2. PARE EL MOTOR

1. ABAISSER LES BRAS DE LEVAGE. POSER L’EQUIPEMENT A PLATE SUR LE SOL. 2. ARRETER LE MOTEUR.

3. PONGA EL FRENO.

3. ENCLENCHER LE FREIN DE STATIONNEMENT.

4. LEVANTE LA BARRA DEL ASIENTO. MUEVA LOS PEDALES HAST A QUE AMBOS SE TRABEN.

4. RELEVER L’ARCEAU DE SECURITE. DEPLACER LES PEDALES JUSQU’A CE QU’ELLES SOIENTE T OUTES DEUX VERROILLEES.

108 of 120

88

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Solamente con control de piso

Commande à la main seulement

ADVERTENCIA (SPANISH)

ATTENTION (FRENCH)

EVITE HERIDAS O LA MUERTE

EVITER LES BLESSURES OU LA MORT

NO USE NUNCA EL CARGADOR SIN LEER LAS INSTRUCCIONES. LEA EL MANUAL DEL OPERA TIO, EL MANUAL DE SERVICIO Y LA GIA DEL OPERARIO.

NE JAMAIS SE SER VIR DE LA CHARGEUSE SANS INSTRUCTIONS. LIRE LE MANUEL DE L’OPERATEUR EL D’ENTRETIEN AINSI QUE LE GUIDE D’UTILISATION.

NO VIAJE O DE LA VUEL TA CON LOS BRAZOS DE ELEVACION ARRIBA. CARGUE, DESCARGUE Y DE LA VUELTA ESTANDO EN UN SITIO PLANO Y NIVELADO. NO EXCEDA LA CAP ACIDAD NOMINAL DE FUNCIONAMIENTO (VEA EL A VISO EN EL CARGADOR).

NE PAS SE DEPLACER NI VIRER AVEC LE BRAS RELEVES. CHARGER, DECHARGER ET VIRER SUR UN SOL PLA T ET HORIZONTAL. NE PAS DEPASSER LE CAP ACITE NOMINALE (CONSULTER L’AUTOCOLLANT APPOSE SUR LA CARGEUSE).

USE LA BARRA DEL ASIENTO. ASEGURESE BIEN EL CINTURON DE SEGURIDAD.

UTILISER L’ARCEAU DE SECURITE. ATTACHER SOIGNEUSEMENT LA CEINTURE DE SECURITE.

NUNCA MODIFIQUE EL EQUIPO NI USE ADITAMENTOS QUE NO ESTEN APROBADOS POR LA COMPAÑIA BOBCAT.

Dealer Copy -- Not for Resale

Solamente con control de mano

NE JAMAIS MODIFIER L’EQUIPEMENT NI SE SERVIR D’ACCESSOIRES QUE NE SONT P AS APPROUVES PAR BOBCAT COMPANY.

MANTENGA LOS PIES EN LOS PEDALES.

MAINTENIR LES PIEDS SUR LES PEDALES.

EN LA PENDIENTES, MANTENGA EL EXTREMO PESADO DE CARGADOR EN POSICION ASCENDENTE.

DANS LES PENTES, T OUJOURS MAINTENIR LA PARTIE LA PLUS LOURDE DE LA CHARGEUSE VERS LE HAUT.

ANTES DE BAJARSE DEL CARGADOR POUR QUITTER LA CHARGEUSE:

1. BAJE LOS BRAZOS DE ELEVACION. COLOQUE EL ADITAMENTO BEIN EN EL SUELO. 2. PARE EL MOTOR

1. ABAISSER LES BRAS DE LEVAGE. POSER L’EQUIPEMENT A PLATE SUR LE SOL. 2. ARRETER LE MOTEUR.

3. PONGA EL FRENO.

3. ENCLENCHER LE FREIN DE STATIONNEMENT.

4. LEVANTE LA BARRA DEL ASIENTO. MUEVA LOS PEDALES HAST A QUE AMBOS SE TRABEN.

4. RELEVER L’ARCEAU DE SECURITE. DEPLACER LES PEDALES JUSQU’A CE QU’ELLES SOIENTE T OUTES DEUX VERROILLEES.

109 of 120

89

864, 864H Bobcat Loader Operation & Maintenance Manual

ADVERTENCIA (SPANISH) EVITE HERIDAS O LA MUERTE

PELIGRO (SPANISH)

LLEVE LA CARGA EN POSICION BAJA

EVITE LA MUERTE

EL NO OBEDECER EST A ADVERTENCIA PUEDE CAUSAR LADEAMIENTO O VUELCOS O PERDIDAD DE LA CARGA Y DE LA VISIBILIDAD.

• MANTENGASE RETIRADO DE ESTA AREA CUANDO

EVITER DES BLESSURES OU LA MORT

DANGER (FRENCH)

TENIR LA CHARGE VERS LE BAS. LE NON RESPECT PEUT ENTRAINER UN BASCULEMENT OU UN RENVERSEMENT DE LA MACHINE, UNE PERTE DE LA CHARGE OU DE VISIBILITE.

EVITER LA MORT

• EVITER CETTER ZONE LORSQUE LES BRAS DE

LEVAGE RELEVÉS NE SONT P AS ASSURÉS PAR DES ARRETS DE BRAS DE LEVAGE. • UNE PEDALE ACTIONNÉE OU UNE PICE DEFECTUEUSE. PEUT PROVOQUER L’ABAISSEMENT DES BRAS DE LEVAGE.

ADVERTENCIA (SPANISH) EL CILINDRO CONTIENE GAS BAJO AL TA PRESION. EL ABNRIR EL CILINDRO PUEDE SOLTAR LA VARILLA Y CAUSAR HERIDAS O LA MUERTE.

AVERTISSEMENT (FRENCH) LES VERINS RENFERMENT UN GAZ SOUS PRESSION. NE JAMAIS OUVRIR UN VERIN CAR LA TIGE RISQUE DE S’ECHAPPER BRUTALEMENT ET DE CAUSER DES BLESSURES OU MEME LA MORT.

PELIGRO (SPANISH) EVITE LA MUERTE

• EL FORZAR EL IMPLEMENT O CONTRA EL SUELO

HACE QUE LA RUEDDAS DELANTERAS SE ELEVEN.

• NUNCA SE META DEBAJO NI ALCANCE NADA DEBAJO DE LOS BRAZOS DE ELEV ACION O DEL CILINDRO DE ELEVACION SIN QUE ESTE INSLADO UN TOPE APROBADO EN LOS BRAZOS DE ELEVACION.

DANGER (FRENCH) EVITER LA MORT

• L’ACCESSOIRE PEUT ETRE APPUYE CONTRE LE SOL ET SOULEVER LES ROUES AVANT.

• NE JAMAIS ALLER SOUS NI METTRE LES MAINS

SOUS LES BRAS OU LE VERIN DE LEV AGE SANS QU’UN ARRET DE BRAS DE LEVAGE APPROUVE SOIT INSTALLE.

110 of 120

90

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

AVERTISSEMENT (FRENCH)

LOS BRAZOS DE ELEVACION ESTAN ELEVADOS, A MENOS QUE ESTEN TRABADOS POW EL T OPE. • EL MOVER EL PIE DEL PEDAL O F ALLA DE UNA PIEZA PUEDEN CAUSAR LA CAIDA DE LOSBRAZOS DE ELEVACION.

PELIGRO (SPANISH) EVITE LA MUERTE

• La desconexión o el aflojamiento de cualquier tubería,

manguera, conector, componente hidráulico o la falla de una parte puede ocasionar la caída de los brazos de elevación.

• Manténgase alejado del área cuando los brazos de elevación se encuentren elevados, a menos que estén sostenidos por medio de un dispositivo de soportepara brazos de elevación aprobado. Cámbielo si está dañado.

ADVERTENCIA (SPANISH)

• La déconnexion ou le desserrage de toute canalisation,

ANTES DE LEVANTAR O BAJAR LA CABINA: • Apague el motor

DANGER (FRENCH)

Dealer Copy -- Not for Resale

ÉVITEZ LA MORT!

El movimiento inesperado del cargador , brazo de levantamiento o implementos causado por el contacto de la cabina con las palancas de dirección puede causa r lesiones graves o muerte.

de tout tuyau, de tout raccord et de tout composant de circuit hydraulique, ainsi qu’une défaillance de pièce conAVERTISSEMENT (FRENCH) nexe peuvent provoquer la chute des bras de levage.

• Tenez-vous à l’écart de cette région lorsque les bras de Tout déplacement intempestif de la chargeuse, du bras de levage sont en position levée, à moins qu’ils ne soient levage ou de l’accessoire causé parle contact de la cabine soutenus par un dispositif de support de bras de levage avec les leviers de direction peut causer des blessure s de type approuvé. Remplacez si endommagé. graves, voire mortelles.

AVANT DE SOULEVER OU D’ABAISSER LA CABINE : • Couper le moteur

111 of 120

91

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 112 of 120

92

864, 864H Bobcat Loader Operation & Maintenance Manual

SPECIFICATIONS 5.

864 COMPACT TRACK LOADER SPECIFICATIONS . . . . . . . . . . . . . . . . . 95 .

ADDITIONAL PUBLICATIONS & TRAINING MATERIALS . . . . . . . . . . . . . .98

Dealer Copy -- Not for Resale

BOBCAT CO. APPROVED ATTACHMENTS & ACCESSORIES . . . . . . . . . 96

SPECIFICATIONS

113 of 120

93

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 114 of 120

94

864, 864H Bobcat Loader Operation & Maintenance Manual

864/864H COMPACT TRACK LOADER SPECIFICATIONS • Dimensions are given for loader equipped with standard dirt bucket and may vary with other bucket types. All

dimensions are shown in in ches. Respective metric dimensions are given in millimeters enclosed by parentheses.

Changes of structure or weight distribution of the loader can cause changes in control and steering response and can cause failure of the loader parts.

Dealer Copy -- Not for Resale

• Where applicable, specifications conform to SAE or ISO standards and are subject to change without notice.

Performance Specifications:

Hydraulic System

Rated Operating Capacity (SAE) . . . . . . . . 2000 lbs. (907 kg) . Tipping Load (SAE) . . . . . . . 5715 lbs. (2592 kg) Operating Weight . . . . . . . . .8200 lbs. (3719 kg) Travel Speed . . . . . . . . . . . .6.7 MPH (10,8 km/hr)

Engine driven, gear type – 18.8 GPM (71,2,0 L/m) @ 3000 RPM System relief @ quick couplers – 3000 PSI (20600 kPa)

Engine:

Electrical System: Alternator . . . . . . . . . . . .12–Volt, 50 amp, open, neg. ground Battery . . . . . . . . . . . . . . 12 . Volt – 1000 CCA @ 0°F (–18°C)

Standard System Instrumentation

Make/Model . . . . . . . . . . . . .Deutz/BF4M1011F Turbo Charged Hourmeter, gauges, and warning lights for engine and Fuel/Cooling . . . . . . . . . . . . .Diesel/Oil hydraulic/hydrostatic functions.

Horsepower (SAE Net) . . . . 73.5 HP (55 kW) Optional BOSS System Instrumentation Number of Cylinders . . . . . . Four Electronic display panel with visual warning and audible alarm.

Lubrication . . . . . . . . . . . . . .Pressure System W/Filter Automatic shutdown function and diagnostic capability.

Air Cleaner . . . . . . . . . . . . . .Dry replaceable cartridge w/safety element Capacities: Type: Fuel Tank . . . . . . . . . . . .25 gals. (94 L) . . . Diesel #2 or #1 Loader Controls: Eng. Lubrication & Steering . . . . . . . . . . . . . . . Two . hand levers Cooling System . . . . . 16 qts. (9,5 L) . . . See Chart page 59 Loader Hydraulics . . . . . . . . Separate foot pedals Engine Oil Change (or optional hand controls) w/Filter . . . . . . . . . . . .9 qts (8.5 L) . . . . See Chart page 59 Auxiliary Hydraulics . . . . . . . Electrical switches in the Idler / Roller . . . . . . . . . ..10 qt. (100 cc) / .70 qt. (70 cc) steering levers – Abv. 0°F (–18°C) use Parking Brake . . . . . . . . . . .Foot operated pedal Hyd./Hydros. Res. . . . . . 4 gals. (15,2 L) Bobcat Fluid 6563328 or Hyd./Hydros. System . . . 10 gals. (38 L) SAE 10W–30, 10W–40 SE Drive System: – Bel. 0°F (–18°C) Primary . . . . . . . . . . . . . . . . Hydrostatic . track drive use 5W–30

115 of 120

95

864, 864H Bobcat Loader Operation & Maintenance Manual

BOBCAT COMPANY APPROVED ATTACHMENTS & ACCESSORIES These and other attachments are approved for use on this model Bobcat loader . Do not use unapproved attachments.

Attachments not manufactured by Bobcat Company may not be approved.

The versatile Bobcat loader quickly turns into a multi–job machine with a tight–fit attachment hook–up . . . from bucket to grapple to pallet fork to backhoe and a variety or other attachments.

See your Bobcat dealer for more details on the these and other attachments and field accessories.

Increase the versatility of your Bobcat Loader with a variety of bucket styles and sizes.

BUCKETS AVAILABLE Many bucket styles, widths and different capacities are available for a variety of different applications. They include Construction & Industrial, Utility, Fertilizer and Snow, to name a few. See your Bobcat dealer for the correct bucket for your Bobcat loader and application.

ATTACHMENTS

Pack and level ground.

Surface preparation for concrete, asphalt or other.

Angle Broom

Sweeper

Planer

Use it to sweep driveways, Sweeps and collects debris sidewalks, parking lots, etc. with one attachment.

Pallet Fork

Sod Layer

Scarifier

Stump Grinder

Prepares hard packed ground for digging or landscaping.

Remove stumps and roots.

Ideal for landscapers.

For handling baled or palleted material.

Longwood Grapple

Industrial Bucket Grapple

Industrial Fork Grapple

For handling logs.

SPECIAL APPLICATIONS KIT WHICH INCLUDES A 1/2 INCH LEXAN FRONT DOOR WITH 1/4 INCH TOP AND REAR WINDOWS MUST BE USED WHEN OPERATING THE LONGWOOD GRAPPLE.

Tiller

Ideal for handling scrap, waste, or pipe.

3–Point Hitch

Use for 3–point mounted attachments.

Carry and lay a roll of sod.

Cut to length from the operator’s seat.

Utility Fork (Grapple Available)

For brush clearing, handling Ideal for handling bundled irregular shaped metal and material, loose straw, and other scrap. manure.

Power Rake

Dozer

Separate rocks & debris, grade, level, prepare for landscaping.

Turn your loader into a mini–crawler with 6–way blade.

Level II FOPS Top Kit

Brushcat Rotary Cutter

Water Kit

Great for breaking up clumps, mixing compost, Used with attachments to tilling. control dust.

Removes asphalt surfaces for repair, replacement or utility work.

Snow Blade

Clean sidewalks, driveways, Additional protection from parking lots. falling trees. rocks.

Great for clearing brush, saplings and grass.

Landplane

Remove large clumps and rocks as you level and grade.

116 of 120

96

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Vibratory Roller

BOBCAT COMPANY APPROVED ATTACHMENTS & ACCESSORIES (Cont’d) These and other attachments are approved for use on this model Bobcat loader . Do not use unapproved attachments.

Attachments not manufactured by Bobcat Company may not be approved.

See your Bobcat dealer for more details on the these and other attachments and field accessories.

ATTACHMENTS (Cont’d) Auger

Rear Stabilizer

Snow Blower

Chipper

Clear snow from driveways, sidewalks, etc.

Grind branches & tree limbs; reduce volume 10 to 1.

(Use with backhoe & transplanter)

Dig 6”–36” holes with ease Increase your backhoe and accuracy. performance and versatility.

Break up concrete quickly and easily.

SPECIAL APPLICATIONS KIT WHICH INCLUDES A 1/2 INCH LEXAN FRONT DOOR WITH 1/4 INCH TOP AND REAR WINDOWS MUST BE USED WHEN OPERATING THE BOB–TACH MOUNTED HYDRAULIC BREAKER.

Mix, transport and dump concrete right where you need it.

Tree Transplanter

Dealer Copy -- Not for Resale

Concrete Mixer

Hydraulic Breaker

Backhoe

Trencher

Dig and load trees for transplanting.

Wheel Saw

Designed for high production digging.

Landscape Rake

Versatile trenching ability for utility lines, etc.

Combination Bucket

Get precise cuts through concrete, asphalt, rebar or frozen ground.

Break up lumpy soil, pick up rocks.

Ground preparation,, for seeding, sodding, leveling.

Heavy duty bucket for dozing, grappling, digging, leveling & loading.

117 of 120

97

864, 864H Bobcat Loader Operation & Maintenance Manual

ADDITIONAL PUBLICATIONS and TRAINING MATERIALS

753BICSOperation&MaintenanceManual#6900438S/N515811001&Above–SpecificationsSection

The following publications and training materials are also available for your Bobcat Loader. You can order them from your Bobcat dealer.

For the latest information on Bobcat products and the Bobcat Company , visit our website at www.bobcat.com

OPERATOR’S HANDBOOK 6708021–Foot Pedals 6708158–Hand Controls

PARTS MICROFICHE OPERATION & MAINTENANCE SERVICE MANUAL MANUAL 6900627 6900626 –complete instruction on the correct operation and the routine maintenance of the BOBCAT loader.

–Up–to–date PARTS information is also available. See your BOBCA T dealer.

–complete maintenance and overhaul instructions for your BOBCAT loader.

SKID STEER LOADER SERVICE SAFETY TRAINING COURSE 6900641 SKID STEER LOADER OPERATOR TRAINING COURSE 6722720 –Introduces operator to step–by–step basics of Skid–Steer loader operation.

Also available in Spanish P/N 6724036.

–Introduces Service T echnicians to step–by–step basics of proper and safe skid–steer loader maintenance and servicing procedures.

OPERATION SAFETY VIDEO 6724793

SAFETY MANUAL 6556500

Skid–Steer Loader

EQUIPMENTMANUFACTURERS INSTITUTE 10S.RIVERSIDEPLAZACHICAGO,ILLINOIS60606–37100

–provides basic safety instructions.

–provides basic safety procedures and warnings for your BOBCA T loader. Also available in Spanish P/N 6724451.

118 of 120

98

864, 864H Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

–gives basic operation instruction and safety warnings.

WARRANTY Bobcat Loaders

During the warranty period, the authorized Bobcat dealer shall repair or replace, at its option, without charge for parts and labor, any part of the Bobcat product which fails because of defects in material or workmanship. The owner shall provide the authorized Bobcat dealer with prompt written notice of the defect and allow reasonable time for replacement or repair. Bobcat Company may, at its option, request failed parts to be returned to the factory. Travel time of mechanics and transportation of the Bobcat product to the authorized Bobcat dealer for warranty work are the responsibility of the owner.

The warranty does not apply to tires or other trade accessories not manufactured

by Bobcat Company. The owner shall rely solely on the warranty, if any, of the respective manufacturers thereof. The warranty does not cover replacement of scheduled service items such as oil, filters, tune–up parts, and other high–wear items. The warranty does not cover damages resulting from abuse, accidents, alterations, use of the Bobcat product with any bucket or attachment not approved

by Bobcat Company, air flow obstructions, or failure to maintain or use the Bobcat product according to the instructions applicable to it.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES (EXCEPT THOSE OF TITLE), EXPRESSED OR IMPLIED, AND THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL BOBCAT COMPANY OR THE AUTHORIZED BOBCAT DEALER BE LIABLE FOR DOWNTIME EXPENSES, LOSS OF MACHINE USE OR OTHER INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.

6570162 (5–00)

119 of 120

Printed in U.S.A.

Dealer Copy -- Not for Resale

Bobcat Company warrants to its authorized dealers and authorized dealers of Bobcat Equipment Ltd., who in turn warrant to the original buyer (owner), that each new Bobcat loader will be free from proven defects in material and workmanship for twelve months after delivery to the original buyer (owner).

120 of 120

Dealer Copy -- Not for Resale