Bobcat 753L Loader Operation & Maintenance Manual 6722925 - PDF DOWNLOAD

Operation & Maintenance Manual

Dealer Copy -- Not for Resale

753L

Doosan purchased Bobcat Company from Ingersoll-Rand Company in 2007. Any reference to Ingersoll-Rand Company or use of trademarks, service marks, logos, or other proprietary identifying marks belonging to Ingersoll-Rand Company in this manual is historical or nominative in nature, and is not meant to suggest a current affiliation between Ingersoll-Rand Company and Bobcat Company or the products of either.

6722925 (7-00) Revised (6-12) 1 of 100

Printed in U.S.A.

© Bobcat Company 2000

OPERATOR SAFETY WARNINGS CORRECT Operator must have instructions before running the machine.

Untrained operators can cause injury or death.

W–2001–1285

Safety Alert Symbol: This symbol with a warning statement, means: “Warning, be alert! Your safety is involved!” Carefully read the message that follows.

B–10731

Never use the loader without instructions. See machine signs (decals), Operations & Maintenance

Manual and Handbook.

WRONG

B–7403

B–6582

B–13418

Always use the seat bar and fasten seat belt snugly.

Always keep feet on the pedals when operating loader.

Never use loader without operator cab with ROPS and FOPS approval. Fasten your seat belt.

Never use loader as man lift or elevating device for personnel.

WRONG

WRONG

WRONG

B–6578

B–6585

B–6595

Keep bystanders away from work area.

Always carry bucket or attachments as low as possible.

Do not travel or turn with lift arms up.

Load, unload and turn on flat level ground.

WRONG

WRONG

Do not use loader in atmosphere with explosive dust or gas or where exhaust can contact flammable material.

WRONG

Never carry riders.

B–6587

B–6594

Never exceed rated operating capacity.

Never leave loader with engine running or with lift arms up.

To park, engage parking brake and put attachment flat on the ground.

B–6591

Never modify equipment.

Use only attachments approved

by Bobcat Company for this model loader.

SAFETY EQUIPMENT The Bobcat loader must be equipped with safety items necessary for each job. Ask your dealer about attachments and accessories.

1. SEAT BELT: Check belt fasteners and check for damaged webbing or buckle.

2. SEAT BAR: When up, it must lock the pedals.

3. OPERATOR CAB (ROPS and FOPS): It must be on the loader with all fasteners tight.

4. HANDBOOK: Must be in the cab.

5. SAFETY SIGNS (DECALS): Replace if damaged.

6. SAFETY TREADS: Replace if damaged.

7. GRAB HANDLES: Replace if damaged.

8. LIFT ARM SUPPORT DEVICE 2 of 100 OSW02–0600 9. PARKING BRAKE

Dealer Copy -- Not for Resale

CORRECT

CORRECT

CONTENTS FOREWORD FOREWORD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii .....

SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xi. . . .

OPERATING INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1. . .

PREVENTIVE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 ...

SYSTEMS ANALYSIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 ....

MACHINE SIGNS TRANSLATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 ...

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73 ....

SAFETY

OPERATING INSTRUCTIONS

REFERENCE INFORMATION Write the correct information for Your Bobcat loader in the spaces below . Always use these numbers when referring to you Bobcat loader.

PREVENTIVE MAINTENANCE

Loader Serial Number . . . . . . . .

Engine Serial Number . . . . . . . .

Dealer Copy -- Not for Resale

SYSTEMS ANALYSIS NOTES:

MACHINE SIGN TRANSLATIONS

SPECIFICATIONS

YOUR LOADER DEALER: ADDRESS: PHONE:

Bobcat Company P.O. Box 128 Gwinner, ND 58040–0128 Bobcat Company Europe J. Huysmanslaan 59 B–1651 LOT BELGIUM

3 of 100

i

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 4 of 100

ii

753L Bobcat Loader Operation & Maintenance Manual

FOREWORD

FOREWORD

This Operation & Maintenance Manual was written to give the owner/operator instructions on the safe operation and maintenance of the Bobcat loader . READ AND UNDERSTAND THIS OPERA TION & MAINTENANCE MANUAL BEFORE OPERATIING YOUR LOADER. If you have any questions, see your Bobcat loader dealer.

SERIAL NUMBER LOCATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v. . .

DELIVERY REPORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v. . . .

BOBCAT LOADER IDENTIFICATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi ..

Dealer Copy -- Not for Resale

753L SERIES EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi ...

5 of 100

iii

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 6 of 100

iv

753L Bobcat Loader Operation & Maintenance Manual

SERIAL NUMBER LOCATIONS

A

Always use the serial number of the loader when requesting service information or when ordering parts.

Early or later models (identification made by serial number) may use different parts, or it may be necessary to use a dif ferent procedure in doing a specific service operation.

LOADER SERIAL NUMBER The loader serial number plate is located on the inside of the left upright, above the grill [A].

Explanation of loader Serial Number: XXXX

P–3395

XXXXX Module 2. – Production Sequence (Series)

B

Module 1: The four digit Model/Engine Combination number identifies the model number and engine combination. This number (in parenthesis beside the model number) is used in the Operation & Maintenance Manual to more easily identify the standard, optionalfield accessory equipment included or available for each specific model.

Module 2: The five digit Production Sequence Number identifies the order which the laader is produced.

P–1572

ENGINE SERIAL NUMBER

C

The serial number is near the fuel injection pump on the engine block [B].

Dealer Copy -- Not for Resale

Module 1. – Model/Engine Combination

DELIVERY REPORT The Delivery Report must be filled out by the dealer and signed by the owner or operator when the Bobcat loader is delivered. An explanation of the form must be given to the owner. Make sure it is filled out completely [C].

7 of 100

v

753L Bobcat Loader Operation & Maintenance Manual

BOBCAT LOADER IDENTIFICATION FRONT LIGHTS (Optional)

OPERATOR SEAT

GRAB HANDLES

REAR AUXILIARY QUICK COUPLERS (OPTIONAL)

STEERING LEVER SEAT BELT TILT CYLINDER

SAFETY TREAD

FRONT AUXILIARY QUICK COUPLERS (OPTIONAL)

BUCKET STEPS •OPERATOR CAB (ROPS & FOPS)

SEAT BAR REAR WINDOW

LIFT ARM LIFT ARM SUPPORT DEVICE

REAR GRILL

LIFT CYLINDER

REAR LIGHT (OPTIONAL)

REAR DOOR

TAIL LIGHT (OPTIONAL)

TIRES* PI–13236 PI–13237

* TIRES – Flotation tires (optional) are shown. The Bobcat loader is factory equipped with standard tires. { BUCKET – Several different buckets and other attachments are available for the Bobcat loader.

• ROPS, FOPS – Roll–Over Protective Structure per SAE J1040 and ISO 3471, and Falling Object Protective Structure per SAE J1043 and ISO 3449, Level I. Level II is available. The Bobcat loader is base–equipped with a standard operator cab as shown

8 of 100

vi

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

{BUCKET

OPTIONS AND ACCESSORIES All 753L bobcat Loaders are standard equipped with the following items: Operator Cab Seat Belt Seat Bar Lift Arm Support Device

Bob–Tach Spark Arrestor Muffler Parking Brake

Below is a listing of the equipment which may vary.

753L Tires 10:00 – 16.5, 6 PR Flotation . . . . . . . . . . . . . . . .Opt. 10:00 – 16.5, 8 PR Flotation . . . . . . . . . . . . . . . .Std. 6.50–16 Solid . . . . . . . . . . . . . . . . . . . . . . . . . . . .Opt .

31:00–15.5, 6 PR Flotation . . . . . . . . . . . . . . . . .Opt

Suspension Seat . . . . . . . . . . . . . . . . . . . . . . . . .Opt. . & FA Lights, Front and Rear . . . . . . . . . . . . . . . . . . . . Opt. . & FA 85 dBa Sound Package . . . . . . . . . . . . . . . . . . . Opt. . & FA 90 dBa Sound Package . . . . . . . . . . . . . . . . . . . Opt. . & FA Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Opt. . . & FA Backup Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . .Opt. . & FA Heated Enclosed Cab . . . . . . . . . . . . . . . . . . . . . Opt. . & FA Counterweight Kit . . . . . . . . . . . . . . . . . . . . . . . .Opt. . & FA Top Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . FA ..

Rear Window . . . . . . . . . . . . . . . . . . . . . . . . . . . .FA .

Hydraulics Front Auxiliary Hydraulics . . . . . . . . . . . . . . . . . .Opt. & FA Hydraulic Bucket Positioning . . . . . . . . . . . . . . . .Opt. & FA Rear Auxiliary Hydraulics . . . . . . . . . . . . . . . . . . Opt. . & FA Instrumentation Bobcat Operation Sensing System . . . . . . . . . . . Opt. Std. = Standard Equipment Opt. = Factory Installed Option FA = Field Accessory NA = Not Available

Dealer Copy -- Not for Resale

Operator Cab

Specifications subject to change without notice

9 of 100

vii

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 10 of 100

viii

753L Bobcat Loader Operation & Maintenance Manual

SAFETY SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ,. xi ..

FIRE PREVENTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiii ....

SAFETY

Dealer Copy -- Not for Resale

MACHINE SIGNS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiv, . . . xv .

11 of 100

ix

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 12 of 100

x

753L Bobcat Loader Operation & Maintenance Manual

SAFETY INSTRUCTIONS FOR BOBCAT SKID–STEER LOADERS AND ATTACHMENTS SAFETY IS THE OPERATOR’S RESPONSIBILITY All Bobcat loaders and attachments are designed to give maximum safety , but no machine design can prevent operator error or carelessness.

The Bobcat skid–steer loader is highly maneuverable and compact. It is rugged and useful under a wide variety conditions. of This presents an operator with hazards associated with off highway, rough terrain applications, common with Bobcat loader usage.

The Bobcat loader has an internal combustion engine with resultant heat and exhaust. All exhaust gases can kill or cause illness so use the loader with adequate ventilation. The loader has a spark arrestor exhaust system or muf fler which is required for operation in certain areas.

The dealer explains the capabilities and restrictions of the Bobcat loader and attachments for each application. The dealer demonstrates the safe operation according to Bobcat instructional materials, which are also available to operators. The dealer can also identify unsafe modifications or use of unapproved attachments. The attachments and buckets are designed for a Rated Operating Capacity (some have restricted lift heights) and secure fastening to the Bobcat loader . The user must check with the dealer, or Bobcat literature, to determine safe loads of materials of specified densities for the loader–attachment combination.

The following publications and training materials provide information on the safe use and maintenance of the Bobcat loader and attachments:

• The Delivery Report is used to assure that complete instructions have been given to the new owner and that the Bobcat loader and attachment is in safe operating condition.

• The Operation & Maintenance Manual delivered with the Bobcat loader or attachment gives operating information as well Dealer Copy -- Not for Resale

as routine maintenance and service procedures. It is a part of the machine and can be stored in a container provided inside the cab of the loader. Replacement Operation & Maintenance Manuals can be ordered from your Bobcat dealer.

• Machine signs (decals) instruct on the safe operation and care of your Bobcat loader or attachment. The signs and their locations are shown in the Operation & Maintenance Manual. Replacement signs are available from your Bobcat dealer.

• An Operator’s Handbook is fastened to the operator cab of the loader. Its brief instructions are convenient to the operator.

The Handbook is available from your dealer in an English edition or one of many other languages. See your Bobcat dealer for more information on translated versions.

• The Safety Manual delivered with the Bobcat loader gives general safety information.

• Operator Training Courses are available from your local Bobcat dealer . They provide information for safe and efficient operation of the Bobcat loader and some attachments. The courses are available in English and Spanish versions.

• Service Safety Training Courses are available from your Bobcat dealer . They provide information for safe and correct service procedures.

• See the ADDITIONAL PUBLICATIONS Page in this manual or your Bobcat dealer for Service andParts Manuals, printed materials, videos, or training courses available. Also check the Bobcat web site www.bobcat.com

The dealer and owner/operator review the recommended uses of the product when delivered. If the owner/operator will be using the machine for a different application(s) he must ask the dealer for recommendations on the new use.

Call Before You Dig 1–888–258–0808 When you call, you will be directed to a location in your state/ city for information about buried lines (telephone, cable TV, water, sewer, gas, etc.)

SI01–0400

13 of 100

xi

753L Bobcat Loader Operation & Maintenance Manual

BEFORE OPERATING THE BOBCAT LOADER Safety Alert Symbol This symbol with a warning statement means: “Warning, be alert! Your safety is involved!” Carefully read the message that follows.

Operator must have instructions before running the machine. Untrained operators can cause injury or death.

W–2001–1285

The Bobcat loader and attachment must be in good operating condition before use.

Check all of the items on the Bobcat Service Schedule Decal under the 8–10 hour column or as shown in this Manual.

SAFE OPERATION NEEDS A QUALIFIED OPERATOR * A QUALIFIED OPERATOR MUST DO THE FOLLOWING: • UNDERSTAND THE WRITTEN INSTRUCTIONS, RULES AND REGULATIONS

This notice identifies procedures which must be followed to avoid damage to the machine.

I–2019–0284

include the Delivery Report, Operation & Maintenance Manual, Operator’s Handbook, Safety Manual and machine signs (decals).

• Check the rules and regulations at your location. The rules may include an employer’s work safety requirements. Regulations may apply to local driving requirements or use of a Slow MovingVehicle (SMV) emblem. Regulations may identify a hazard such as a utility line.

Warnings on the machine and in the manuals are for your safety. Failure to obey warnings can cause injury or death.

W–2044–1285

• HAVE TRAINING WITH ACTUAL OPERATION • Operator training must consist of a demonstration and verbal instruction. This training is given by your Bobcat dealer before the product is delivered.

• The new operator must start in an area without bystanders anduse all the controls until he can operate the machine and attachment safely under all conditions of the work area. Always fasten seat belt before operating.

• Operator Training Courses are available from your Bobcat dealer in English and Spanish. They provide information for safe and efficient equipment operation. Safety videos are also available.

• Service Safety Training Courses are available from your Bobcat dealer. They provide information for safe and correct service procedures.

• KNOW THE WORK CONDITIONS • Know the weight of the materials being handled. Avoid exceeding the Rated Operating Capacity of the machine. Material which is very dense will be heavier than the same volume of less dense material. Reduce the size of load if handling dense material.

• The operator must know any prohibited uses or work areas, for example, he needs to know about excessive slopes.

• Know the location of any underground lines. Call local utilities or the OLL T FREE phone number found in the SAFETY INSTRUCTIONS Section of this manual.

• Wear tight fitting clothing. Always wear safety glasses when doing maintenance or service. Safety glasses, hearing

protection or special applications kit are required for some work.

See your dealer about Bobcat Safety equipment.

* For an operator be qualified, he must not use drugs or alcoholic drinks which impair his alertness or coordination while working. An operator who is taking prescription drugs must get medical advice to determine if he can safely operate a machine.

SI02–0400

14 of 100

xii

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

• The written instructions from Bobcat Company

FIRE PREVENTION

The machines and some attachments have components that are at high temperatures under normal operating conditions.

The primary source of high temperatures is the engine and exhaust system. The electrical system, if damaged or incorrectly maintained, can be a source of arcs or sparks.

Flammable debris (leaves, straw, etc.) must be removed regularly. If flammable debris is allowed to accumulate, it can cause a fire hazard. Clean often to avoid this accumulation. Flammable debris in the engine compartment is a potential fire hazard.

The spark arrestor exhaust system (if equipped) is designed to control the emission of hot particles from the engine and exhaust system, but the muffler and the exhaust gases are still hot.

• Do not use the machine where exhaust, arcs, sparks or hot components can contact flammable material, explosive dust or gases.

• The operator cab, engine compartment and engine cooling system must be inspected every day and cleaned if necessary to prevent fire hazards and overheating.

• Check all electrical wiring and connections for damage. Keep the battery terminals clean andtight. Repair or replace any damaged part.

• Check fuel and hydraulic tubes, hoses and fittings for damage and leakage. Never use open flame or bare skin to check for leaks. Tighten or replace any parts that show leakage. Always clean fluid spills. Do not use gasoline or diesel fuel for cleaning parts. Use commercial nonflammable solvents.

• Do not use ether or starting fluids on any engine which has glow plugs. These starting aids can cause explosion and injure Dealer Copy -- Not for Resale

you or bystanders.

• Always clean the machine, disconnect the battery, and disconnect the wiring from the electronic controllers before welding.

Cover rubber hoses, battery and all other flammable parts. Keep a fire extinguisher near the machine when welding. Have good ventilation when grinding or welding painted parts. Wear dust mask when grinding painted parts. Toxic dust or gas can be produced.

• Stop the engine and let it cool before adding fuel. No smoking!

• Use the procedure in the Operation & Maintenance Manual for connecting the battery and for jump starting.

• Use the procedure in the Operation & Maintenance Manual for cleaning the spark arrestor muffler (if equipped).

• Know where fire extinguishers and first aid kits are located and howto use them. Fire extinguishers are available from your Bobcat dealer.

SI03–0400

15 of 100

xiii

753L Bobcat Loader Operation & Maintenance Manual

MACHINE SIGNS (DECALS)

Follow the instructions on all the Machine Signs (Decals) that are on the loader . Replace any damaged machine signs and be sure they are in the correct locations. Machine signs are available from your Bobcat dealer.

6705712 Std. Only) 6703728

6705720

Dealer Copy -- Not for Resale

6577754 (2)

6561377

6557565

6561383 6703723

6579639

6579509

6579528

6579510

16 of 100

xiv

P–1521

753L Bobcat Loader Operation & Maintenance Manual

MACHINE SIGNS (DECALS) (Cont’d)

6565990

6578368

6706558

Dealer Copy -- Not for Resale

6560573

*6578218

*6579511

*6700237

* Located inside the engine compartment.

P–1520 17 of 100

xv

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

753LOperation&MaintenanceManual#6722925–ContentsSection

18 of 100

xvi

753L Bobcat Loader Operation & Maintenance Manual

OPERATING INSTRUCTIONS ATTACHMENTS & BUCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 ...

Installation And Removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 ...

DAILY INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ....

ENGINE SPEED CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5. . .

GETTING READY FOR OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 ..

HYDRAULIC CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7. . .

Auxiliary Hydraulics Operation (Optional BOSS®) . . . . . . . . . . . . . . . . . . . .9.

Auxiliary Hydraulics Operation (Standard) . . . . . . . . . . . . . . . . . . . . . . . . . . 8. .

Bucket Position Valve Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7. . .

Foot Pedals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 .....

Lift Arm Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7. . . .

Seat Sensor Override (If Equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ...

Tilt Operation (Bucket) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7. . . .

OPERATING INSTRUCTIONS

LIFTING THE LOADER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 ....

Four Point Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 ....

Single Point Lift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 ....

OPERATING PROCEDURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 ...

Backfilling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 .....

Emptying The Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 ....

Digging Into The Ground . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 ...

Filling The Bucket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 ....

Leveling The Ground (Using Lift Arms In Float Position) . . . . . . . . . . . . . . 24 .

PARKING BRAKE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5. . . .

Dealer Copy -- Not for Resale

INSTRUMENT PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3. . . .

Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3. . . . .

Optional (BOSS®) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4. . . .

PARKING THE BOBCAT LOADER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 ...

SEAT BAR RESTRAINT SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 ...

STARTING THE ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 ...

Normal Starting Condition (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 ..

Normal Starting Condition (Standard) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 ..

Cold Temperature Starting Condition (Optional) . . . . . . . . . . . . . . . . . . . . .17 .

Cold Temperature Starting Condition (Standard) . . . . . . . . . . . . . . . . . . . .15 .

Warming The Hydraulic/Hydrostatic System . . . . . . . . . . . . . . . . . . . . . . . 15 ..

STEERING LEVERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6. . . .

STOPPING THE ENGINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 ...

TOWING THE LOADER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 ....

TRANSPORTING THE BOBCAT LOADER . . . . . . . . . . . . . . . . . . . . . . . . . 26 ..

19 of 100

–1–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 20 of 100

–2–

753L Bobcat Loader Operation & Maintenance Manual

INSTRUMENT PANEL

A

(Standard)

3

The following items are located on the standard instrument panel [A]:

5

1

4

1. LIGHT SWITCH (OPT.) – Controls the work and travel lights.

10

6

2. KEY SWITCH – For starting, stopping the engine.

7

3. FUSE (ACCESSORIES) – To protect the electrical system from overload.

11 2

4. FUSE (IGNITION) – To protect the electrical system from overload.

12

8 9

5. HOURMETER – Records the total operating hours of the loader.

B–14108

6. FUEL GAUGE – Shows the amount of fuel in the fuel tank.

Dealer Copy -- Not for Resale

7. ENGINE TEMPERATURE GAUGE – Shows the engine coolant temperature.

8. ENGINE WARNING LIGHT – Lights when engine oil pressure is low or coolant temperature is high.

Stop the engine if the light comes ”ON”.

9. TRANSMISSION WARNING LIGHT – Low transmission charge pressure, hydraulic filter needs replacement or high fluid temperature. Stop the engine if the light comes ON. 10. VOLTMETER – Shows the condition of the battery and the rate of charge.

11. PREHEAT BUTTON – For preheating the glow plugs before starting the engine.

12. OPTIONAL AUXILIARY HYDRAULICS MODE SWITCH – For engaging the auxiliary hydraulics (front & rear).

21 of 100

–3–

753L Bobcat Loader Operation & Maintenance Manual

INSTRUMENT PANEL (Optional BOSS®)

A

The following items are located on the (optional) instrument panel [A] & [B]:

OPTIONAL 2

1. KEY SWITCH – Controls the starting and stopping of the engine. If engine doesn’t start turn the key to the OFF position for 3 seconds to reset the fuel timer module.

3

2. LIGHT SWITCH (OPTIONAL) – Controls the work and travel lights.

4 1

3. DIAGNOSTIC COUPLER – Connector for diagnostic tool to make service checks of the system operation unit and other components.

4. DISPLAY PANEL – The display has the following symbols and functions (Ref. 6 thru 19).

B–13348

5. OPTIONAL HYDRAULICS MODE SWITCH – For engaging the auxiliary hydraulics (front and rear).

B

6. FUEL – Shows the amount of fuel in the tank.

7. BATTERY VOLTAGE – Shows the condition of the battery and charge rate. Also will indicate a WARNING for high and low voltage. oil

9. ENGINE COOLANT SYMBOL – Shows engine coolant temperature and/or low coolant level (SHUTDOWN & Warning).

6

10. FUEL FILTER – If fuel pump and bar flashes it is a low fuel WARNING H2O symbol indicates water in the fuel filter (NOT FUNCTIONAL AT THIS TIME).

7

8 9

10 12

11. SHUTDOWN SYMBOL – The symbol is associated with any shutdown condition. When this symbol comes ON the shutdown will occur in 30 seconds.

During shutdown the buzzer will sound continuously and the symbol will flash until the key is turned OFF .

13

11 15

14

16

17

NOTE: The engine can be restarted for 30–second periods to move the loader after a shutdown condition.

12. WARNING SYMBOL – The symbol will be ON when any warning or shutdown is activated. The warning symbol is also used to indicatea warning if there is no related symbol on the display. During a warning the buzzer will beep three times and symbol will be ON continuously.

18

B–12914

13. HOURMETER – Records the total operating hours of the loader. The five character code will display the operating hours to the nearest tenth. When SHUTDOWNS or W ARNINGS occur an alpha–numeric code will be displayed in the hourmeter area to inform the operator of the problem (See SYSTEM ANALYSIS Page 61 for code listing). During a SHUTDOWN or WARNING the hourmeter symbol is not visible.

16. GLOW PLUG – The symbol will flashwhen the glow plugs are energized. The hourmeter will also contain characters GLOXX where XX indicates the remaining time the glow plugs will be ‘ ‘ON’’. Glow plug will count down in 5 second increments.

17. ENGINE SPEED – This symbol will indicate an engine overspeed WARNING and SHUTDOWN.

14. CHARGE PRESSURE AND FILTER CONDITION – Flashing symbol indicates low fluid charge pressure and SHUTDOWN. If arrows are ON with gear/drop it is fluid charge pressure.This symbol will also indicate a clogged hydraulic fluid filter.

18. PARKING BRAKE – This symbol will indicate when the brake is engaged (NOT FUNCTIONAL A T THIS TIME. 19. HYDRAULIC FLUID TEMPERATURE – This symbol will indicate a high fluid temperature and SHUTDOWN or WARNING.

15. AIR FILTER CONDITION – This symbol will indicate a clogged air filter element.

22 of 100

19

–4–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

8. ENGINE OIL SYMBOL – Shows engine pressure. Flashing symbol indicated low oil pressure. (Warning & Shutdown)

ENGINE SPEED CONTROL

A

The engine speed control (Item 1) [A] is at the right side of the operator’s seat. Engine speed is controlled by moving the control forward to increase the enginespeed and backward to decrease the engine speed.

1

P–2145

B

PARKING BRAKE

Dealer Copy -- Not for Resale

Lock the parking brake by pushing down on the top (toe) of the pedal [B].

MC–1914

P–1495

To release the parking brake, push down on the bottom (heel) of the pedal [C].

C MC–1914

P–1490 23 of 100

–5–

753L Bobcat Loader Operation & Maintenance Manual

STEERING LEVERS

A 1

AVOID INJURY OR DEATH When operating the machine: • Keep the seat belt fastened snugly.

• The seat bar must be lowered.

• Keep your feet on the pedal controls.

W–2046–0595 P–2150

B

The steering levers (Item 1) [A] are on the right and left side in front of the seat.

FORWARD

REVERSE

The steering levers control forward and reverse travel of the loader [B].

FORWARD TRAVEL – Push both levers forward.

REVERSE TRAVEL – Pull both levers backward.

NORMAL TURNING – Move one lever farther forward than the other.

FAST TURNING – Push one lever forward and pull the other lever backward.

LEFT TURN

RIGHT TURN

LEFT FAST TURN

RIGHT FAST TURN

For slow travel speed, push the steering levers forward only a small amount.

To increase travel speed, push both levers farther forward.

For maximum pushing force, push the levers forward only a small amount with the engine at full RPM.

PI–1849

24 of 100

–6–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

For safe control of the loader always move the levers slowly and smoothly. Only a small movement is necessary to move the loader.

HYDRAULIC CONTROLS

A

Foot Pedals

3 1 2

P–2149

Keep both feet on pedals while operating machine. Failure to do so can cause serious injury.

W–2002–1285

Put your feet on the pedals and KEEP THEM THERE any time you operate the loader.

Two foot pedals (Item 1) control the hydraulic cylinders for the lift and tilt function [A].

Lift Arm Operation

Push on the top (toe) (Item 3) [A] of the lift pedal all the way forward until it locks into detent (float).

Use the float position of the lift arms to level material while driving backward.

4

loose

1 5

Tilt Operation

P–2149

The right pedal controls the action of the bucket. Push the top (toe) (Item 4)[A] of the pedal to tiltthe bucket forward.

Push the bottom of the pedal (heel) (Item 5)[A] to tilt the bucket backward.

Bucket Position Valve Operation The function of the bucket positioning valve isto keep the bucket in the same approximate position it is placed in, prior to the upward lift cycle.

Dealer Copy -- Not for Resale

B–7440

The left pedal controls the lift arms. Push on the bottom (heel) (Item 2) [A] of the pedal to raise the lift arms.

Bucket positioning functions automatically during the upward lift cycle only.

B–7441

25 of 100

–7–

753L Bobcat Loader Operation & Maintenance Manual

HYDRAULIC CONTROLS (Cont’d)

A

Auxiliary Hydraulics Operation (Standard) Described below is the operation of the optional auxiliary hydtraulics used with the standard instrument panel.

NOTE: Both steering lever controls are blank (no switches) as standard.

2

Press the mode switch (Item 1) [A] (on the instrument panel) to allow for the front and optional rear auxiliary hydraulics, the light (Item 2) [A] will come ON.

3 1

The switch (Item 1)[B] on the rightsteering lever controls the front auxiliary hydraulics and the switch (Item 2) [B] on the left steering lever controls the rear auxiliary hydraulics.

P–0563

Switch (Item 4) [B] controls the optional horn.

B 2

Push switch (Item 1) [B] in the right or left direction (with mode switch engaged & top light ON) to change fluid flow direction to the front quick couplers [C] (Example: Open and close grapple teeth).

1 4

Right Steering Lever Control (Optional)

Left Steering Lever Control (Optional)

REAR AUXILIARY CONTROL (OPTIONAL): Push the switch (Item 2) [B] in the right or left direction (with mode switch engaged & top light ON) to change the fluid flow direction to the rear quick couplers [C] (Example: Raise or lower rear stabilizers).

P–2154

DETENT CONTROL:

3

P–2152

Push the mode switch (Item 1) [A] the second time to engage the detent function and both lights (Item 2 & 3) [A] will come ON. Push the front button (Item 3) [B] to give the front auxiliary hydraulics a constant flow of fluid(Example: Operate a backhoe).

To release the detent position, push the button (Item 3) [B] again.

RELIEVE PRESSURE AT FRONT QUICK COUPLERS: Turn the key switch to the aux. pressure relief position (all the way to the left and hold the key in this position until the engine stops) to release the hydraulicpressure at the front quick couplers.

RELIEVE PRESSURE AT REAR QUICK COUPLERS:

P–2150

With the engine running, press the mode switch (Item 1) [A] to engage the auxiliary hydraulics, the light (Item 2) [A] will come ON.

AUXILIARY C FRONT QUICK COUPLERS (OPTIONAL)

Push the heel of the tilt pedal so the hydraulic fluid goes over the main relief pressure and at the same time push switch (Item 2) [B] back and forth several times to relieve the pressure at the rear quick couplers. Release the tilt pedal. Stop the engine.

PI–12251 26 of 100

–8–

REAR AUXILIARY QUICK COUPLERS (OPTIONAL)

P–3052

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

FRONT AUXILIARY CONTROL (OPTIONAL):

HYDRAULIC CONTROLS (Cont’d)

A

Auxiliary Hydraulics Operation (Optional BOSS) Described below is the operation of the optional auxiliary hydraulics used with the optional BOSS instrument panel.

NOTE: The right and left steering lever controls are blank (no switches) as standard.

2

Press the mode switch (Item 1) [A] (on the instrument panel) to allow for the front and optional rear auxiliary hydraulics, the light (Item 2) [A] will come ON.

1

The switch (Item 1) [B] on the right steering lever controls the front auxiliary hydraulics and the switch (Item 2) [B] on the left steering lever controls the rear auxiliary hydraulics.

3

Switch (Item 4) [B] controls the optional horn.

P–0998

B 2

Push switch (Item 1) [B] in the right or left direction (with mode switch engaged & top lightON) to change fluid flow direction to the front quick couplers [C] (Example: Open and close grapple teeth).

1 4

Right Steering Lever Control (Optional)

Left Steering Lever Control (Optional)

REAR AUXILIARY CONTROL (OPTIONAL): Push the switch (Item 2) [B] in the right or left direction (with mode switch engaged & top light ON) to change the fluid flow direction to the rear quick couplers [C] (Example: Raise or lower rear stabilizers).

3

P–2154

P–2152

DETENT CONTROL: Push the mode switch (Item 1) [A] the second time to engage the detent function and both lights (Items 2 & 3) [A] will come ON. Push the front button (Item 3) [A] to give the front auxiliary hydraulics a constant flow of fluid [B] (Example: Operate a backhoe).

To release the detent position, push the button (Item 3) [B] again.

Dealer Copy -- Not for Resale

FRONT AUXILIARY CONTROL (OPTIONAL):

RELIEVE PRESSURE AT FRONT QUICK COUPLERS: Turn the key switch to the aux. pressure relief position (all the way to the left and hold the key in this position until the engine stops) to release the hydraulic pressure at the front quick couplers.

P–2150

RELIEVE PRESSURE AT REAR QUICK COUPLERS: With the engine running, press the mode switch (Item 1) [A] to engage the auxiliary hydraulics, the light (Item 2) [A] will come ON.

AUXILIARY C FRONT QUICK COUPLERS (OPTIONAL)

REAR AUXILIARY QUICK COUPLERS (OPTIONAL)

Push the heel of the tilt pedal so the hydraulic fluid goes over the main relief pressure and at the same time push switch (Item 2) [B] back and forth several times to relieve the pressure at the rear quick couplers. Release the tilt pedal. Stop the engine.

P–01523 27 of 100

–9–

P–3052

753L Bobcat Loader Operation & Maintenance Manual

DAILY INSPECTION

A

The loader must be in good operating condition [A].

Check the following items: • • • • • • • • •

Engine Oil Hydraulic/Hydrostatic Fluid Engine Cooling System Operator Cab, Seat Belt, Seat Bar & Pedal Interlocks Lift Arm & Cylinder Pivot Pins Tires & Tire Pressure Any Loose or Broken Parts Safety Tread & Safety Signs Check the instrument panel display readout for faulty codes (Page 61).

B–6583

Instructions are necessary before operating or servicing machine. Read Operation & Maintenance Manual, Handbook and signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing. Check for correct function after adjustments, repairs or service. Failure to follow instructions can cause injury or death.

W–2003–0797

B

6578218

28 of 100

–10–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

NOTE: Fluids such as engine oil, hydraulic fluid, coolant, etc. must be disposed of in an environmentally safe manner.

Some regulations require that certain spills and leaks on the ground must be cleaned in a specific manner. See local, state and federal regulations for correct disposal.

SEAT BAR RESTRAINT SYSTEM

A

The seat bar restraint system has a pivoting seat bar (Item 1) [A] with arm rests and has spring loaded interlocks for the lift and tilt control pedals. The operator controls the use of the seat bar. The seat bar in the down position helps to keep the operator in the seat. The interlocks require the operator to lower the seat bar in order to operate the foot pedal controls. When the seat bar is up, the lift and tilt control pedals are locked when returned to the NEUTRAL POSITION.

1

P–2148

AVOID INJURY OR DEATH When operating the machine: • Keep the seat belt fastened snugly.

• The seat bar must be lowered.

• Keep your feet on the pedal controls.

B

SEAT BAR DOWN

The spring loaded interlocks (Item 1) [B] control the locking and unlocking functions of the control pedals.

2

The interlocks (Item 1) [B] require the operator to lower the seat bar (Item 2) [B] which allows the operator to move the foot pedals to control the lift and tilt functions.

When the seat bar is lowered, it pushes the interlock (Item 1) [B] down on both sides, releasing the pedal linkages (Item 3) [B] from the interlocks.

The pedals will pivot in both directions when the interlock is down.

Pedal Linkage 3

Seat Bar

1 Interlock

Pedal Lock Shield

Dealer Copy -- Not for Resale

W–2046–0595

MC–1668

AVOID INJURY OR DEATH Before you leave the operator’s seat: • Lower the lift arms, put the attachment flat on the ground.

• Stop the engine.

• Engage the parking brake.

• Raise seat bar, move pedals until both lock.

C

SEAT BAR RAISED Seat Bar

W–2045–1086

AVOID INJURY OR DEATH The seat bar system must lock the lift and tilt control pedals in neutral when the seat bar is up. Service the system if pedals do not lock correctly.

Interlock

W–2105–1285

When the seat bar is raised, spring forces raise the interlocks [C].

Pedal Lock Shield

The foot pedals will not pivot when the interlock is up.

Refer to the Seat Bar Restraint System Inspection & Maintenance (Page 35).

29 of 100

MC–1668

–11–

753L Bobcat Loader Operation & Maintenance Manual

GETTING READY FOR OPERATION

A

Read the Operation & Maintenance Manual and the Operator’s Handbook before operating the loader [A].

Operator must have instructions before running the machine. Untrained operators can cause injury or death.

W–2001–0596 P–2143

Use the bucket or attachment steps, grab handles and safety treads (on top of the loader lift arm crossmember and main frame) to get on and off the loader [B].

B

B–12885

Pull the seat lever (Item 1) and adjust the seat position for comfortable operation of the loader controls [C].

C

1 Fasten the seat belt snugly and adjust it so that the buckle is centered between the hips [D].

P–1531

D AVOID INJURY OR DEATH When operating the machine: • Keep the seat belt fastened snugly.

• The seat bar must be lowered.

• Keep your feet on the pedal controls.

W–2046–0595

P–2146 30 of 100

–12–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Safety treads are installed on the Bobcatloader to provide a slip resistant surface for getting on and of f the loader.

Keep safety treads clean and replace when damaged.

Replacement treads are available from your dealer.

GETTING READY FOR OPERATION (Cont’d)

A

Lower the seat bar [A].

Be sure the parking brake is engaged.

All controls must be in the neutral position before you start the engine (See Starting The Engine, Page 13).

P–2147

Keep feet on the pedals while seated in the loader [B].

P–2148

STARTING THE ENGINE

C

WRONG

Dealer Copy -- Not for Resale

B

When an engine is running in an enclosed area, fresh air must be added to avoid concentration of exhaust fumes. If the engine is stationary, vent the exhaust outside.

Exhaust fumes contain odorless, invisible gases which can kill without warning.

W–2050–1285 B–3724

AVOID INJURY OR DEATH • Engines can have hot parts and hot exhaust

D

gas. Keep flammable material away.

• Do not use machines in atmosphere

WRONG

containing explosive gas.

W–2051–1086

B–6578 31 of 100

–13–

753L Bobcat Loader Operation & Maintenance Manual

STARTING THE ENGINE (Cont’d)

A

Normal Starting Condition (Standard) Adjust the seat position for comfortable operation of the foot pedals and steering levers.

Fasten the seat belt snugly and adjust it so the buckle is centered between the hips.

Lower the seat bar [A].

P–2147

B

Put the foot pedals and steering levers in neutral (center) position (Item 1) [B].

NEUTRAL POSITION

Set the engine speed control to half speed position (Item 2) [B].

Turn the key to the ON position. The engine and transmission warning light will be ON when the key is on the the engine is stopped (Item 3) [B].

Dealer Copy -- Not for Resale

1 1/2 THROTTLE

Turn the key to start position (Item 4) and release it when the engine starts [B].

2 Do not engage the starter for longer than 15 seconds at a time. Longer use can damage the starter by overheating. Cool the starter for one minute between uses.

ON POSITION

I–2034–0284

When the engine starts, release the key and it will return to the run position (Item 5) [B].

STOP THE ENGINE IF THE NOT GO OFF.

3

WARNING LIGHTS DO

START POSITION

Without turning the key to the ST ART position, turn the key to the RUN position (Item 5)[B] for starting the loader in cold weather (See Cold Temperature Starting Condition, Page 15).

NOTE: Upon failed start, if the key is turned OFF, wait for at least three seconds before turning the key ON to reset the fuel timer module.

4 RUN POSITION

5 32 of 100

–14–

PI–2188

753L Bobcat Loader Operation & Maintenance Manual

STARTING THE ENGINE (Cont’d)

A

Do not use ether with glow plug (preheat) systems. Explosion can result which can cause injury or death.

1

W–2071–1285

Cold Temperature Starting Condition (Standard) See Normal Starting Condition, Page 14. T urn the key switch to the RUN position.

B–14108

Push the PREHEAT button (Item 1) [A] on the left side of the instrument panel to preheat the glow plugs.

B

Refer to the decal on the left side of the operator cab for operation of the preheat system [B].

If the temperature is below 32°F (0°C), use the following procedure to make starting the engine easier: Replace the engine oil with the correct type and viscosity for the anticipated starting temperature (See Oil Specifications, Page 41).

6705712

Make sure the battery is at full charge.

Install block or tank heater on the engine.

Warming The Hydraulic/Hydrostatic System

Dealer Copy -- Not for Resale

Follow the steps under Normal Starting Condition and repeat the Preheating procedure until the engine starts.

When the temperature is below –20°F (–30°C), hydrostatic oil must be warmed before starting.

The hydrostatic system will not get enough oil at low temperatures and will be damaged. Park the machine in an area where the temperature will be above 0°F (–18°C) if possible.

I–2007–1285

Let the engine run for a minimum of 5 minutes to warm the engine and hydrostatic fluid before operating the loader.

If the warning light comes ON when operating the loader (cold), more warm up time is needed.

33 of 100

–15–

753L Bobcat Loader Operation & Maintenance Manual

STARTING THE ENGINE (Cont’d)

A

Normal Starting Condition (Optional) Adjust the seat position for comfortable operation of the foot pedals and steering levers.

Fasten the seat belt snugly and adjust it so the buckle is centered between the hips.

Lower the seat bar [A].

P–2147

Put the foot pedals and steering levers in neutral(center) position (Item 1) [B].

B

Be sure the parking brake is engaged.

Set the engine speed control to the 1/2 speed position (Item 2) [B].

2

Turn the key to ON position, one beep will sound and the display symbols will be ON [C]. Turn the key to START (See Cold Temperature Starting Condition). Release the key when the engine starts.

PI–2188

C

Do not engage the starter for longer than 15 seconds at a time. Longer use can damage the starter by overheating. Cool the starter for one minute between uses.

I–2034–0284

When the key is turned ON, watch the alpha numeric display for readout codes. These readouts codes are from the previous work shift when a W ARNING may have occured (See SYSTEM ANALYSIS, SERVICE CODES Page 61).

The readout codes may be viewed again by turning the key switch OFF and then ON again without starting the engine.

Once the engine is started, the microprocessor will clear all readout codes from memory . The codes will not reappear in subsequent key ON conditions unless the problem recurs.

NOTE: Upon failed start, if the key is turned OFF, wait for at least three seconds before turning the key ON to reset the fuel timer module.

34 of 100

B–12914

–16–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

1

STARTING THE ENGINE (Cont’d)

A

Do not use ether with glow plug (preheat) systems. Explosion can result which can cause injury or death.

W–2071–1285

Cold Temperature Starting Condition (Optional) See Normal Starting Condition, Page 16. T urn the key switch to the ON position (readout codes will show first) and the glow plug symbol will be ON [A].

The alpha numeric display will indicate the characters GLOXX where XX will show remaining time the glow plugs will be energized. The following chart shows the time glow plugs will be energized dependent on engine coolant temperature.

COOLANT TEMPERATURE 0oF. (–18oC.) & Below 05–505F. (–185–105C.) 505–705F. (105–215C.) 705F (215C) & Above

35 of 100

GLOW PLUG ‘‘ON’’ TIME 25 Seconds 15 Seconds 5 Seconds NO TIME

B–12914

–17–

Dealer Copy -- Not for Resale

NOTE: If display is showing readout codes the timing of the glow plug activation may be obscured on the display. However, the glow plugs will actually be energized.

753L Bobcat Loader Operation & Maintenance Manual

STARTING THE ENGINE (Cont’d)

A

Turn the key to the START position and release when the engine starts. If the engine does not start, turn the key switch to the OFF position and ONagain to cycle the flow plugs again. When the engine is running, slowly move the engine speed control forward to increase engine RPM.

‘‘OFF’’ POSITION

If the starting temperature is below 32°F. (0°C.), use the following procedure to make starting easier: Replace the engine oil with the correct type and viscosity for the anticipated starting temperature (See Oil Specifications Chart Page 41).

Make sure the battery is at full charge.

PI–2188

Install an engine block heater or tank heater.

STOPPING THE ENGINE

Dealer Copy -- Not for Resale

Pull the engine speed control fully backward to decrease the engine speed. Turn the key switch to the OFF position [A].

36 of 100

–18–

753L Bobcat Loader Operation & Maintenance Manual

ATTACHMENT AND BUCKETS

A

Never use attachments or buckets which are not approved by Bobcat Company. Buckets and attachments for safe loads of specified densities are approved for each model.

Unapproved attachments can cause injury or death.

W–2052–1285 B–6587

WEIGHT OF LOADS LBS. (KG) (Without counterweights)

1115 (505)

The rated Operating Capacity for this loader is shown on a label in the operator cab (See SPECIFICATIONS Pages 73).

It is determined by using a standard dirt bucket, and material of normal density, such as dirt or dry gravel. If longer buckets are used and load center moves forward and reduces the Rated Operating Capacity. If very dense material is loaded, the volume must be reduced.

Dealer Copy -- Not for Resale

B

960 (435)

The dealer can identify , for each model loader, the attachments and buckets approved by BobcatCompany.

The buckets and attachments are approved for Rated Operating Capacity and for secure fastening to the Bob–Tach.

Exceeding the Rated Operating Capacity can cause the following problems: 1. Steering the loader may be difficult.

15.75 (400)

2. Tires may wear faster.

3. There will be a loss of stability.

4. The life of the Bobcat loader will be reduced.

24.00 (610)

Use the correct size bucket for the type and density of material being handled. For safe handling of materials and avoiding machine damage, the attachment (or bucket) should handle a full load without going over the Rated Operating Capacity for the loader . Partial loads make steering more difficult.

CENTER OF LOAD LOCATION Inches (mm)

NOTE: When a pallet fork is used, different Bob–Tach levers must be installed for clearance at the pallet fork frame. See your dealer for the correct Bob–Tach levers.

6712931 6712932

Maximum loads to be carried when using a pallet fork are shown in figure [B].

AVOID INJURY OR DEATH Do not exceed rated operating capacity.

Excessive load can cause tipping or loss of control.

W–2053–0887

37 of 100

–19–

753L Bobcat Loader Operation & Maintenance Manual

ATTACHMENTS AND BUCKETS (Cont’d) Installing The Bucket Or Attachment The loader is equipped with the Bob–Tach system. The Bob–Tach is used for fast changing of buckets and attachments. See the Attachment Operation & Maintenance Manual to install other attachments.

Bob–Tach levers have spring tension. Hold lever tightly and release slowly. Failure to obey warning can cause injury.

Pull the Bob–Tach levers all the way up (Item 1) [A].

Enter the loader.

W–2054–1285

Fasten the seat belt, lower the seat bar and start engine.

the

Release the parking brake.

Lower the lift arms and tilt the Bob–Tach forward.

A

Drive the loader forward until the top edge of the Bob–Tach is completely under the top flange of the bucket [A] (or other attachments).

1

Tilt the Bob–Tach backward until the cutting edge of the bucket (or other attachment) is slightly off the ground [B].

Stop the engine and exit the loader.

N–17024

B Before you leave the operator’s seat: * Lower the lift arms, put the attachment flat on the ground. * Stop the engine. * Engage the parking brake. * Raise seat bar. * (Foot Pedal Controls) Move pedals until both lock. * (Mechanical Hand Controls) Move the hand controls until both lock.

The seat bar system must lock the lift and tilt controls in neutral when the seat bar is up.

Service the system if hand controls do not lock correctly.

N–17025

W–2329–0798

C

Push down on the Bob–T ach levers until they are fully engaged in the locked position [C].

1

The levers will contact the frame as shown (Item 1) [C] when locked.

N–17028

If the levers do not engage in the locked position, see your Bobcat loader dealer for maintenance.

N–17027 38 of 100

–20–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Be sure the Bob–Tach levers do not hit the bucket.

ATTACHMENTS AND BUCKETS (Cont’d)

A

The wedges (Item 1) [A] must extend through the holes (Item 1) [B] in the mounting frame of the bucket (or attachment), securely fastening the bucket to the Bob–Tach. The wedge is shown extending through the hole in the bucket [A].

1 N–17022

B

Bob–Tach wedges must extend through the holes in attachment. Lever(s) must be fully down and locked. Failure to secure wedges can allow attachment to come off and cause injury or death.

1 N–17023

Removing The Bucket Or Attachment

C

Put the attachment flat on the ground and lower or close the hydraulic equipment. If the attachment is hydraulically controlled (ie: combination bucket, backhoe, etc.), stop the engine and relieve hydraulic pressure in the auxiliary circuit (See Relieving Hydraulic Pressure, Page 9).

Dealer Copy -- Not for Resale

W–2102–0497

Raise the seat bar, unfasten the seat belt, set theparking brake and exit the loader.

Pull the Bob–Tach levers [C] all the way up.

Disconnect the hydraulic hoses, if necessary.

Enter the loader.

Fasten the seat belt, lower the seat bar and start engine

N–17026

the

D

Release the parking brake.

Lower the lift arms and tilt the Bob–Tach forward.

Move the loader backward, away from the bucket or attachment [D].

N–17024 39 of 100

–21–

753L Bobcat Loader Operation & Maintenance Manual

OPERATING PROCEDURE

A

Always warm up the engine and hydrostatic system before operating the loader.

WITH BUCKET FULL

Machines warmed up with moderate engine speed and light load have longer life.

I–2015–0284

Going Up Slope Operate the loader with the engine at full speed for maximum horsepower. Move the steering levers only a small amount to operate the loader slowly.

B

New operators must operate the loader in an open area without bystanders. Operate the controls until the loader can be handled at an ef ficient and safe rate for all conditions of the work area.

B–12878

WITH BUCKET FULL

With empty bucket, go down or up the slope with the heavy end toward the top of the slope [C] & [D].

Going Down Slope

C

B–12878

WITH BUCKET EMPTY

AVOID INJURY OR DEATH • Keep the lift arms as low as possible.

• Do not travel or turn with the lift arms up.

• Turn on level ground.

• Go up and down slopes, not across them.

• Keep the heavy end of the machine uphill.

• Do not overload the machine.

Failure to obey warnings can cause the machine to tip or roll over and cause injury or death.

W–2018–1187

Going Down Slope Raise the bucket only high enough to avoid obstructions on rough ground.

D

WITH BUCKET EMPTY

Going Up Slope 40 of 100

–22–

B–12873

B–13297

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

With a full bucket, go up to down the slope with theheavy end toward the top of the slope [A] & [B].

OPERATING PROCEDURES (Cont’d)

A

Filling the Bucket Push down on the top of the lift pedal until the lift arms are all the way down. Push the top of the tilt pedal to put the cutting edge of the bucket on the ground [A].

B–12830

Drive slowly forward into the material. Push the bottom of the tilt pedal to raise the front of the bucket [B].

B–12872

B–12830

Load, unload and turn on flat level ground. Do not exceed rated operating capacity shown on sign (decal) in cab. Failure to obey warnings can cause the machine to tip or roll over and cause injury or death.

W–2056–1187

Drive backward away from the material.

Dealer Copy -- Not for Resale

B

Emptying the Bucket Push down on the bottom of the lift pedal to raise the bucket over the truck box or bin [C].

B–12871

Drive forward slowly until the bucket is over the top of the truck box or bin. Push the top of the tilt pedals until the bucket is empty [C]. If all the material is near the side of the truck or bin, push it to the other side with the bucket.

C B–12830

Never dump over an obstruction, such as a post, that can enter the operator cab. The machine could tip forward and cause injury or death.

W–2057–0694

B–12869 41 of 100

–23–

753L Bobcat Loader Operation & Maintenance Manual

OPERATING PROCEDURES (Cont’d)

A

Digging Into the Ground Put the lift arms all the way down. Push the top of the tilt pedal until the cutting edge of the bucket is on the ground.

Drive forward slowly and continue to tilt the bucket down until it enters the ground [A].

B–12830

Push the bottom of the tilt pedal a small amount to increase traction and keep an even digging depth.

Continue to drive forward until the bucket is full. When the ground is hard, raise and lower the cutting edge of the bucket with the tilt pedal while driving forward slowly.

B–12874

Push the bottom of the tilt pedal to the tilt the bucket backward as far as it will go when the bucket is full [B].

B–12830

Leveling the Ground (Using Lift Arms in Float Position) Push the top (toe) of the lift pedal all the way forwarduntil the pedal is in the locked position (detent) to put the lift arms in a float position [C].

B–12876

Push the tilt pedal to change the position of the cutting edge on the bucket. With the bucket tilted farther forward, there is more force on the cutting edge and more loose material can be moved.

C B–12830

Never drive forward when the hydraulic control for lift arms is in float position.

I–2005–1285

Drive backward to level loose material. Push the bottom of the lift pedal to unlock from the detent position.

B–12875 42 of 100

–24–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

B

OPERATING PROCEDURES (Cont’d)

A

Backfilling Lower the lift arms and put the cutting edge of the bucket on the ground. Drive forward to the edge of the hole to push the material into the hole [A].

B–12830

Tilt the bucket forward as soon as it is past the edge of the hole [A]. If necessary, raise the lift arms to empty the bucket.

PARKING THE BOBCAT LOADER Stop the Bobcat loader on level ground.

Lower the lift arms fully and put the edge of the bucket on the ground.

Pull the engine speed control all the way backward. Turn the key switch to the OFF position.

Dealer Copy -- Not for Resale

B–12877

AVOID INJURY OR DEATH Before you leave the operator’s seat: • Lower the lift arms, put the attachment flat on the ground.

• Stop the engine.

• Engage the parking brake.

• Raise seat bar, move pedals until both lock.

W–2045–1086

Engage the parking brake.

Lift the seat bar and make sure the foot pedals are in the locked position.

Un–buckle the seat belt. Remove the key from theswitch to prevent operation of the loader by unauthorized personnel.

43 of 100

–25–

753L Bobcat Loader Operation & Maintenance Manual

TRANSPORTING THE BOBCAT LOADER

A

Adequately designed ramps of sufficient strength are needed to support the weight of the machine when loading onto a transport vehicle. Wood ramps can break and cause personal injury.

W–2058–0494 MC–1241

A loader with an empty bucket or no attachment must be loaded backward onto the transport vehicle [A].

Be sure the transport and towing vehicles are of adequate size and capacity.

Use the following procedure to fasten the Bobcat loader to the transport vehicle to prevent the loader from moving during sudden stops or when going up or down slopes [B].

Lower the bucket or attachment to the floor . Stop the engine. Engage the parking brake. Install chains at the front and rear loader tie down positions. Fasten eachend of the chain to the transport vehicle.

P–3401

P–1548

MC–1242

44 of 100

–26–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

B

LIFTING THE LOADER

A

Four Point Lift

AVOID INJURY OR DEATH When operating the machine: • Keep the seat belt fastened snugly.

• The seat bar must be lowered.

• Keep your feet on the pedal controls.

MC–1434

W–2046–0595

B

The loader can be lifted with the four point lift which is available as a kit from your Bobcat loader dealer.

Single Point Lift

MC–1664

AVOID INJURY OR DEATH • Before lifting, check fasteners on single point lift and operator cab.

• Assemble front cab fasteners as shown in this manual.

• Never allow riders in the cab or bystanders

Dealer Copy -- Not for Resale

Attach cables or chains to lift eyes as shown [A].

within 15 feet (5 meters) while lifting the machine.

W–2007–0497

The loader can also be lifted with the singlepoint lift which is available as a kit from your Bobcat loader dealer.

Attach cables or chains to the single point lift as shown [B].

The single point lift, supplied by Bobcat Company is designed to lift and support the Bobcat loader without affecting roll over and falling object protection features of the operator cab.

TOWING THE LOADER To prevent damage to the loaders hydrostatic system, the loader must be towed only ashort distance at slow speed (EXAMPLE: Moving the loader onto a transport vehicle.

The towing chain (or cable) must be rated at 1–1/2 times the weight of the loader (See SPECIFICATIONS Page 73).

45 of 100

–27–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

753LOperation&MaintenanceManual#6722925–OperatingInstructionsSection

46 of 100

–28–

753L Bobcat Loader Operation & Maintenance Manual

PREVENTIVE MAINTENANCE

47 of 100

–29–

PREVENTIVE MAINTENANCE

Dealer Copy -- Not for Resale

AIR CLEANER SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 ...

ALTERNATOR BELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 ....

Adjusting The Alternator Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45 ...

BOB–TACH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 .....

COOLING SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 ....

Cleaning The Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 ...

Checking The Coolant Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43 ...

Removing Coolant From The Cooling System . . . . . . . . . . . . . . . . . . . . . . 44 ..

DRIVE BELT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 .....

Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 .....

Drive Belt Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 ....

ELECTRICAL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 ....

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 .....

Battery Removal And Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 ...

Servicing The Electrical System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 ...

Using A Booster Battery (Jump Starting) . . . . . . . . . . . . . . . . . . . . . . . . . .47 ..

ENGINE LUBRICATION SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 ...

Checking Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 ....

Replacement Of Oil and Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 ...

FAN GEARBOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 ....

FINAL DRIVE TRANSMISSION (CHAINCASE) . . . . . . . . . . . . . . . . . . . . . 54 ..

Checking And Adding Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 ...

Removing Oil From The Chaincase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 ...

FUEL SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 ....

Filling The Fuel Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 ....

Fuel Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 .....

Fuel Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 ....

Removing Air From The Fuel System . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40 ..

HYDRAULIC/HYDROSTATIC SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 ..

Checking And Adding Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 ...

Hydraulic/Hydrostatic Filter Replacement . . . . . . . . . . . . . . . . . . . . . . . . . .49 ..

Hydraulic Fluid Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 ...

Hydraulic Reservoir Breather Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 ...

LIFT ARM SUPPORT DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 ...

Engaging The Lift Arm Support Device . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 ..

Disengaging The Lift Arm Support Device . . . . . . . . . . . . . . . . . . . . . . . . . 32 ..

LUBRICATION OF THE BOBCAT LOADER . . . . . . . . . . . . . . . . . . . . . . . . 57 ..

OPERATOR CAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 ....

Emergency Exit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 ....

Lowering The Operator Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 ...

Raising The Operator Cab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33 ...

PIVOT PINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 .....

REAR DOOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 .....

Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 .....

REAR GRILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 .....

SEAT BAR RESTRAINT SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 ...

Seat Bar Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 ....

Seat Bar Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 ....

SERVICE SCHEDULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 ....

SPARK ARRESTOR MUFFLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 ...

TIRE MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 ....

Tire Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 ....

Tire Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 .....

Wheel Nuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 .....

753L Bobcat Loader Operation & Maintenance Manual

MAINTENANCE SAFETY Instructions are necessary before operating or servicing machine. Read and understand the Operation & Maintenance Manual, Handbook and signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing. Check for correct function after adjustments, repairs or service. Untrained operators and failure to follow instructions can cause injury or death.

W–2003–0199

Safety Alert Symbol: This symbol with a warning statement, means: “Warning, be alert! Your safety is involved!” Carefully read the message that follows.

B–10731

B–12365

B–7469

Never service the Bobcat® Skid Steer Loader without instructions.

Use the correct procedure to lift or lower operator cab.

Cleaning and maintenance are required daily.

WRONG

WRONG

WRONG

B–11799

B–15231

B–15280

Have good ventilation when welding or grinding painted parts.

Wear dust mask when grinding painted parts. Toxic dust and gas can be produced.

Avoid exhaust fume leaks which can kill without warning. Exhaust system must be tightly sealed.

Disconnecting or loosening any hydraulic tubeline, hose, fitting, component or a part failure can cause lift arms to drop. Do not go under lift arms when raised unless supported by an approved lift arm support device. Replace if damaged.

Never work on loader with lift arms up unless lift arms are held by an approved lift arm support device. Replace if damaged.

Never modify equipment or add attachments not approved by Bobcat Company.

WRONG

WRONG

WRONG

B–6590

B–6580

B–6589

Stop, cool and clean engine of flammable materials before checking fluids.

Never service or adjust loader with the engine running unless instructed to do so in the manual.

Avoid contact with leaking hydraulic fluid or diesel fuel under pressure. It can penetrate the skin or eyes.

Never fill fuel tank with engine running, while smoking or when near open flame.

Keep body, jewelry and clothing away from moving parts, electrical contacts, hot parts and exhaust.

Wear eye protection to guard from battery acid, compressed springs, fluids under pressure and flying debris when engines are running or tools are used. Use eye protection approved for type of welding.

Keep rear door closed except for service. Close and latch door before operating the loader.

Lead–acid batteries produce flammable and explosive gases.

Keep arcs, sparks, flames and lighted tobacco away from batteries.

Batteries contain acid which burns eyes or skin on contact.

Wear protective clothing. If acid contacts body, flush well with water. For eye contact flush well and get immediate medical attention.

Maintenance procedures which are given in the Operation & Maintenance Manual can be performed by the owner/operator without any specific technical training. Maintenance procedures which are not in the Operation & Maintenance Manual must be performed ONLY BY QUALIFIED BOBCAT SERVICE PERSONNEL. Always use genuine Bobcat replacement parts. The Service Safety Training Course is available from your Bobcat dealer.

48 of 100

–30–

MSW01–0600

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

CORRECT

CORRECT

CORRECT

SERVICE SCHEDULE Maintenance work must be done at regular intervals. Failure to do so will result in excessive wear and early failures. The service schedule is a guide for correct maintenance of the Bobcat loader.

Instructions are necessary before operating or servicing machine.

Read Operation & Maintenance Manual, Handbook and signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing. Check for correct function after adjustments, repairs or service. Failure to follow instructions can cause injury or death.

W–2003–0797

Engine Oil Air Cleaner required.

Engine Cooling System

SERVICE REQUIRED

8–10

50

100

250 1000

Check the oil level and add oil as needed.

Check condition indicator or display panel. Service only when Clean debris from oil cooler, radiator & grill. Check coolant level cold in recovery tank. Add 50/50 ethylene glycol & water as needed.

Lubricate with multi–purpose lithium based grease (12 places).

Lift Arms, Cyl., Bob–Tach Pivot Pins and Wedges Engine Air System Check for leaks & damaged components.

Tires Check for damaged tires and correct air pressure.

Seat Belt, Seat Bar & Pedal Check the condition of seat belt. Check the seat bar & pedal inter– Interlocks locks for correct operation. Clean dirt and debris from moving parts.

Safety Signs and Safety Check for damaged signs (decals) and safety tread. Replace any Tread signs or safety treads that are damaged or worn.

Operator Cab Check the fastening bolts, washers & nuts. Check the condition of cab.

Fuel Filter Remove the trapped water.

Hyd. Fluid, Hoses & Check fluid level & add asneeded. Check for damaged & leaks Tubelines Repair & replace as needed.

Final Drive Trans.

Check oil level.

(Chaincase) Battery Check cables & electrolyte level.

Control Pedals & Steering Check for correct operation. Repair or adjust as needed.

Wheel Nuts L Check for loose wheel nuts & tighten to 105–115 ft.–lbs. (142–156 Nm) torque.

Parking Brake Check operations & adjust as needed.

Alternator Belt Check tension & adjust as needed.

Engine Oil & Filter Replace oil & filter.

Spark Arrestor Muffler Clean the spark chamber.

Engine/Hydro. Drive Belt * Check for wear or damage. Make adjustment as needed.

Fuel Filter Replace filter element.

Steering Shaft Grease two fittings.

Hyd./Hydro. Filter • Replace the filter element.

Hyd. Reservoir Breather Replace the reservoir breather cap.

Cap Fan Drive Gearbox Check gear lube level.

Final Drive Trans.

Replace the oil in the chaincase.

Hyd. Reservoir Replace the fluid.

Hydraulic Motors Replace the case drain filter (2).

Dealer Copy -- Not for Resale

ITEM

L Check wheel nut torque every 8 hours for the first 24 hours.

• Also replace hydraulic/hydrostatic filter element when the transmission warning light comes ‘‘ON”.

Or every 12 months. * Inspect the new belt after first 50 hours.

49 of 100

–31–

753L Bobcat Loader Operation & Maintenance Manual

LIFT ARM SUPPORT DEVICE

A

Never work on a machine with the lift arms up unless the lift arms are secured by an approved lift arm support device. Failure to use an approved lift arm support device can allow the lift arms or attachment to fall and cause injury or death.

W–2059–0598 Service lift arm support device if damaged or if parts are missing. Using a damaged lift arm support or with missing parts can cause lift arms to drop causing injury or death.

P–3405

W–2271–1197

B

Engaging The Lift Arm Support Device Maintenance and service work can be done with the lift arms lowered. If the lift arms are raised, use the following procedure:

Disconnect the spring from the lift arm support device retaining pin, hold onto the support device and remove the retaining pin [A].

Lower the lift arm support device on top of the lift cylinder .

Hook the free end of the spring to the lift arm support device so there will be no interference with the support device engagement [B].

P–3403

Sit in the operator seat, fasten the seat belt and lower the seat bar. Start the engine.

C

Raise the lift arms, until the lift arm support device drops onto the lift cylinder rod [C].

Lower the lift arms slowly until the support device is held between the lift arm and the lift cylinder. Stop the engine.

Raise the seat bar and move pedals until both pedals lock.

Install pin (Item 1) [C] into the rear of the lift arm support device below the cylinder rod.

1

Disengaging The Lift Arm Support Device Remove the pin from the lift arm support device.

P–3402

Connect the spring from the lift arm support device to the bracket below the lift arms [D].

D

Sit in the operator seat, fasten the seat belt and lower the seat bar. Start the engine.

Raise the lift arms a small amount and the spring will lift the support device off the lift cylinder rod. Lower the lift arms. Stop the engine.

Raise the seat bar and move pedals until both pedals lock.

Disconnect the spring from the bracket.

Raise the support device into storage position and insert pin through lift arm support device and bracket [A].

P–3404

Connect spring to pin [A].

50 of 100

–32–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Put jackstands under the rear corners of the loader.

OPERATOR CAB

A

The Bobcat loader has an operator cab (ROPS and FOPS) as standard equipment to protect the operator from rollover and falling objects. Check with your dealer if the operator cab has been damaged.

ROPS/FOPS – Roll–Over Protective Structure per SAE J1040 and ISO 3471, and Falling Object Protective Structure per SAE J1043 and ISO 3449, Level I. Level II is available.

Level I – Protection from falling bricks, small concrete blocks, and hand tools encountered in operations such as highway maintenance, landscaping, and other contruction site services.

P–1518

Level II – Protection from falling trees, rocks; for machines involved in site clearing, overhead demolition or forestry.

P–1528

Never modify operator cab by welding, grinding, drilling holes or adding attachments unless instructed to do so by Bobcat Company.

Changes to the cab can cause loss of operator protection from rollover and falling objects, and result in injury or death.

W–2069–1285

P–3409

Raising The Operator Cab Stop the loader on a level surface. Lower the lift arms. If the lift arms must be up while raising the operator cab, install the lift arm support device (Page 32).

Dealer Copy -- Not for Resale

B

Before the cab or the lift arms are raised for service, jackstands must be put under the rear corners of the frame. Failure to use jackstands can allow the machine to tip backward causing injury or death.

W–2014–0895

Loosen the nut (both sides) at the front corner of the operator cab [A].

Remove the nut and plate (both sides) [A].

Lift on the grab handle and bottom of the operator cab slowly until the cab latching mechanism engages and the cab is all the way up [B].

51 of 100

–33–

753L Bobcat Loader Operation & Maintenance Manual

OPERATOR CAB (Cont’d)

A

Lowering The Operator Cab NOTE: Make sure the seat bar is fully raised or lowered when lowering the cab. Use the grab handles to lower the cab.

Pull down on the bottom of the operator cab until it stops at the latching mechanism.

Release the latching mechanism and pull the cab all the way down [A].

P–03411

Install the plate and nut (both sides) [B].

P–01518

Emergency Exit

P–01528

C

The front opening on the operator cab and rear window provide exists.

To exit through the rear window procedure:

, use the following

Pull on the tag at the rear window to remove the rubber cord [C].

Push the rear window out of the operator cab.

P–0660

Exit through the rear of the operator cab [D].

D

P–3398 52 of 100

–34–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

B

Tighten the nuts to 40–50 ft.–lbs. (54–68 Nm) torque.

SEAT BAR RESTRAINT SYSTEM

A

The seat bar restraint system hasa pivoting seat bar with arm rests and has spring loaded interlocks forthe lift and tilt control pedals. The operator controls the use of the seat bar. The seat bar in the down position helps to keep the operator in the seat. The interlocks require the operator to lower the seat bar in order to operate thefoot pedal controls. When the seat bar is up, the lift and tilt pedals are locked when returned to the neutral position.

P–3397

P–3270

AVOID INJURY OR DEATH The seat bar system must lock the lift and tilt control pedals in neutral when the seat bar is up. Service the system if pedals do not lock correctly.

B

Pedal Lock Shield

W–2105–1285

Sit in the seat and fasten the seat belt. Engage the parking brake. Pull the seat bar all the way down. Start the engine.

Operate each foot pedal to check both the lift and tilt functions.

Raise the lift arms until the bucket is about 2 feet (600 mm) off the ground. Raise the seat bar, try to movethe tilt pedal. The pedal must be firmly locked in neutralposition.

There must be no motion of the tilt (bucket) when the pedal is pushed.

P–1640

Lower the seat bar , lower the lift arms and place the bucket flat on the ground. Stop the engine. Raise the seat bar and operate the foot pedals to be sure that the pedals are firmly locked in the neutral position. UN–buckle the seat belt.

AVOID INJURY OR DEATH Before you leave the operator’s seat: • Lower the lift arms, put the attachment flat on the ground.

• Stop the engine.

• Engage the parking brake.

• Raise seat bar, move pedals until both lock.

Seat Bar Maintenance Clean any debris or dirt from the moving parts [A] & [B].

Inspect the linkage bolts and nuts for tightness. The correct torque is 25–28 ft.–lbs. (34–38 Nm).

W–2045–1086

If the seat bar system does not function correctly, check for free movement of each linkage part. Check for excessive wear. Adjust pedal control linkage. Replace parts that are worn or damaged. Use only genuine Bobcat replacement parts.

53 of 100

Dealer Copy -- Not for Resale

Clean

Seat Bar Inspection

–35–

753L Bobcat Loader Operation & Maintenance Manual

REAR DOOR

A

AVOID INJURY OR DEATH Never service or adjust the machine when the engine is running unless instructed to do so in the manual.

W–2012–0497

Put your fingers into the slot in the rear door and pull on the latch handle [A].

P–1591

P–1594

Pull the rear door open.

1

Keep the rear door closed when operating the machine. Failure to do so could seriously injure a bystander.

W–2020–1285

2

Adjustment The door latch catch (Item 1) [B] can be adjusted side to side for alignment with the door latch mechanism.

P–1598

The door latch mechanism (Item 2) [B] can be adjusted backward or forward for alignment with the door catch.

P–1595

C

REAR GRILL To open the rear grill, use the following procedure: Open the rear door.

Raise the rear grill [C].

P–1597

The rear grill is held open by the cylinder (Item 1)[D], on the right side of the rear grill.

D

NOTE: To prevent damage to the rear grill, always lower the rear grill before raising the operator cab.

1

P–1657 54 of 100

–36–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

B

AIR CLEANER SERVICE

A

WITH CONDITION INDICATOR: Replace the large (outer) filter element only when the red ring shows in the window of the condition indicator (Item 1) [A].

1

NOTE: Before replacing the filter element, push the button on the condition indicator (Item 2) [A].

Start the engine. If the red ring does not show, do not replace the filter element.

2

Replace the inner filter every third time the outer filter is replaced or when the red ring still shows in the indicator window after the outer filter has been replaced.

P–0371

WITH BOSS OPTION: It is important to change the air filter element only when the service codes (on the optional instrument panel) shows the symbols [AF.2] [B].

B–12914

Service the air cleaner as follows:

C

Remove the dust cover wing nut [C].

Dealer Copy -- Not for Resale

B

P–1604

Remove the dust cover [D].

D

P–1603 55 of 100

–37–

753L Bobcat Loader Operation & Maintenance Manual

AIR CLEANER SERVICE (Cont’d)

A

Remove the wing nut at the large air filter element [A].

P–1600

Remove the large filter element [B].

B

NOTE: Make sure all sealing surfaces are free of dirt and debris.

P–1601

NOTE: Be sure sealing washer is in place [C].

C

Install the dust cover and tighten the wing nut.

Check the air intake hose for damage. Check the air cleaner housing for damage. Check to make sure all connections are tight.

Only replace the inner filter element under the following conditions: • Replace the inner filter element every third time the outer filter is replaced.

• Replace the inner filter element when the service codes show symbols (Page 37, [B]), only after the outer filter element has been changed and the engine speed is at full RPM.

P–1607

Remove the inner filter wing nut [C].

D

Remove the inner filter [D].

Install a new filter and tighten the wing nut.

P–1610 56 of 100

–38–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Install the new filter element and washer and tighten the wing nut.

FUEL SYSTEM

A

Fuel Specifications Use only clean, high quality diesel fuel, Grade No. 2 or Grade No. 1.

The following is one suggested blending guideline which should prevent fuel gelling problems.

No. 2

No. 1

+15°/–9° and above Down to –20°/–29° Below –20°/–29°

100% 50% 0%

0% 50% 100%

1

We recommend an operator contact their fuel supplier for local recommendations.

P–3399

Filling The Fuel Tank

B

WRONG

Stop and cool the engine before adding fuel.

NO SMOKING! Failure to obey warnings can cause an explosion or fire.

W–2063–0887

Remove the fuel fill cap (Item 1) [A].

Use a clean, approved safety container to add fuel of the correct specifications. Add fuel only in an area that has free movement of air and no open flames or sparks. NO SMOKING! [B].

B–13456

C

Install and tighten the fuel fill cap [A].

Fuel Filter

Dealer Copy -- Not for Resale

Temp. F°/C°

2 Always clean up spilled fuel or oil. Keep heat, flames, sparks or lighted tobacco away from fuel and oil. Failure to use care around combustibles can cause explosion or fire which can result in injury or death.

1 P–1569

W–2103–1285

See the SERVICE SCHEDULE Page 31 for the service interval when to remove the water from the fuel filter.

Loosen the drain (Item 1) [C] at the bottom of the filter element to drain any water from the filter.

See the SERVICE SCHEDULE Page 31 for the service interval when to replace the fuel filter.

To replace the fuel filter element, use a filter wrench to remove the filter element (Item 2) [C].

Clean the area around the filter housing. Put oil on the seal of the new filter element. Install the fuel filter, and hand tightened.

Remove the air from the fuel system.

57 of 100

–39–

753L Bobcat Loader Operation & Maintenance Manual

FUEL SYSTEM (Cont’d)

A

Removing Air From The Fuel System

1

After replacing the fuel filter element or when the fuel tank has run out of fuel, the air mustbe removed from the fuel system prior to starting the engine.

Diesel fuel or hydraulic fluid under pressure can penetrate skin or eyes, causing serious injury or death. Fluid leaks under pressure may not be visible. Use a piece of cardboard or wood to find leaks. Do not use your bare hand. Wear safety goggles. If fluid enters skin or eyes, get immediate medical attention from a physician familiar with this injury.

P–1569

B

W–2072–0496

Operate the hand pump (priming bulb) until fuel from the vent with no air bubbles [B].

flows

Close the vent (Item 1) [A] on the fuel filter housing.

P–1576

C

Open the vent (Item 1) [C on the fuel injection pump].

Operate the hand pump (priming bulb) until the feels solid [B].

pump

1

Tighten the vent plug [C].

Start the engine. It may be necessary to open the vent, at the fuel injection pump, briefly until the engine runs smoothly.

P–1573

58 of 100

–40–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Open the vent (Item 1) [A] on the fuel filter housing.

ENGINE LUBRICATION SYSTEM

A

Checking Engine Oil Check the engine oil level every day.

Before starting the engine for the work shift.Open the rear door. Remove the dipstick [A].

Keep the oil level between the marks on the dipstick.

Use a good quality motor oil that meets API Service Classification of CC, CD or CE (See Oil Chart below).

Oil Chart

P–1589 RECOMMENDED SAE VISCOSITY NUMBER (LUBRICATION OILS FOR DIESEL ENGINE CRANKCASE)

C° –40

–34

–29

–23

–18

–13

–7

–1

+4

+10

+15

+21

+27

+32

+38

+43 +49

B

SAE 40W or 20W–50 SAE 10W–30 SAE 15W–40

* SAE 5W–30 SAE 20W–20 SAE 10W P–1590

SYNTHETIC OIL Use recommendation from Synthetic Oil Mfgr.

–40 –30

F°

–20

–10

0

+10

+20

+30

+40

+50

+60

+70

+80

+90

C

+100 +110 +120

TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE (DIESEL ENGINES MUST USE API CLASSIFICATION CD, CF4, CG4 )

* Can be used ONLY when available with appropriate diesel rating.

Dealer Copy -- Not for Resale

SAE 30W

Replacement Of Oil And Filter

1

See the SERVICE SCHEDULE Page 31 for the service interval for replacing the engine oil and filter.

Run the engine until it is at operating themperature.Stop the engine.

P–1588

Open the rear door. Remove the drain plug[B]. Drain the oil into a container.

Remove the oil filter (Item 1) [C].

Clean the filter housing surface. Put clean oil on the new oil filter gasket. Install and hand tighten.

Install and tighten the drain plug.

59 of 100

–41–

753L Bobcat Loader Operation & Maintenance Manual

ENGINE LUBRICATION SYSTEM (Cont’d)

A

Remove the filler cap (Item 1) [A] from the oil fill tube.

1

Put 7.5 qts. (7,1 L) of oil in the engine (See Oil Chart, Page 41) [B] ).

P–1586

Start the engine and let it run for several minutes. Stop the engine. Check for leaks at the oil filter and check the oil level. Add oiil as needed if it is not at the top mark (Item 1) [B] on the dipstick.

B

Always clean up spilled fuel or oil. Keep heat, flames, sparks or lighted tobacco away from fuel and oil. Failure to use care around combustibles can cause explosion or fire which can result in injury or death.

P–1575

W–2103–1285

60 of 100

–42–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

1

COOLING SYSTEM

A

Check the cooling system every day to prevent over–heating, loss of performance or engine damage.

Wear safety glasses to prevent eye injury when any of the following conditions exist: • When fluids are under pressure.

• Flying debris or loose material is present.

• Engine is running.

• Tools are being used.

P–1596

W–2019–1285

B

Cleaning The Cooling System

Use air pressure or water pressure to clean the top of the oil cooler [A].

Raise the oil cooler and clean the top of the radiator [B].

Check cooling system for leaks.

P–1599

C

Checking The Coolant Level Open the rear door. Check the coolant level in the coolant recovery tank (Item 1) [C] on the right side of the engine.

The coolant recovery tank must be 1/3 full.

Dealer Copy -- Not for Resale

Raise the rear grill.

Add premixed coolant, 50% water and 50% ethylene glycol to the recovery tank if the coolant level is low.

1

P–1586

61 of 100

–43–

753L Bobcat Loader Operation & Maintenance Manual

COOLING SYSTEM (Cont’d)

A

Removing Coolant From The Cooling System

1

Do not remove radiator cap when the engine is hot. You can be seriously burned.

W–2070–1285

P–1654

Open the rear door. Open the rear grill.

Remove the radiator cap (Item 1) [A].

B

Connect a hose to the engine block drain valve (Item 1) [B]. Open the drain valve and drain the coolant into a container.

NOTE: Protect the cooling system by adding premixed 50% ethylene glycol and 50% water to the system. This mixture will protect the cooling system to –34°F. (–36°C.)

1

Mix the coolant in a separate container. (See SPECIFICATIONS for correct capacity, Page 73).

P–1587

Fill the radiator with the premixed coolant. Install the radiator cap.

Fill the coolant recovery tank 1/3 full.

Run the engine until it is at operating temperature. Stop the engine.

Check the coolant level in the recovery tank when cool.

Add coolant to the recovery tank as needed.

62 of 100

–44–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

After all the coolant is removed, close the drain valve.

ALTERNATOR BELT

A

Adjusting The Alternator Belt

2

Stop the engine.

Raise the operator cab (Page 33).

Loosen the alternator mounting bolt (Item 1) [A].

Loosen the adjustment bolt (Item 2) [A].

Move the alternator until the belt has 5/16’ ’ (8,0 mm) movement at the middle of the belt span with 15 lbs. (66 N) of force.

1 P–1646

Tighten the adjustment bolt and mounting bolt.

Dealer Copy -- Not for Resale

Lower the operator cab.

63 of 100

–45–

753L Bobcat Loader Operation & Maintenance Manual

ELECTRICAL SYSTEM

A

Description The loader has a 12 volt, negative ground alternator charging system. The electrical system is protected by fuses (Item 1) [B] & [C] located in the instrument panel or the engine compartment. The fuses will protect the electrical system when there is anelectrical overload. The reason for the overload must be found before starting the engine again.

Servicing The Electrical System The battery cables must be clean and tight. Check the water level in the battery. Remove any acid or corrosion from the battery and cables with a sodium bicarbonate and water solution [A].

P–0742

B

OPTIONAL 753L

Batteries contain acid which burns eyes and skin on contact. Wear goggles, protective clothing and rubber gloves to keep acid off body.

1

In case of acid contact, wash immediately with water. In case of eye contact get prompt medical attention and wash eye with clean, cool water for at least 15 minutes.

P–1605

C

If electrolyte is taken internally drink large quantities of water or milk! DO NOT induce vomiting. Get prompt medical attention.

STANDARD 753L 1

W–2065–1296

Fuse Location – 753L (Option) The electrical system for loaders is protectedby two fuses (Item 1) [B] installed in the wiring harness. Fuses protect the electrical system from an overload. The fuses are located in the engine compartment under the air cleaner.

B–14108

Fuse Location – 753L (Standard) The electrical system for this model loader is protected by two fuses (Item 1) [C] located in the instrument panel.

64 of 100

–46–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Cover the battery terminals and cable ends with grease.

ELECTRICAL SYSTEM (Cont’d)

A

Using A Booster Battery (Jump Starting) (Cont’d)

1

Keep arcs, sparks, flames and lighted tobacco away from batteries. When jumping from booster battery make final connection (negative) at engine frame.

2

Do not jump start or charge a frozen or damaged battery. Warm battery to 60°F. (16°C.) before connecting to a charger. Unplug charger before connecting or disconnecting cables to battery.

Never lean over battery while boosting, testing or charging.

P–1606

B

1

Battery gas can explode and cause serious injury.

Connect the end of the first cable (Item 1) [A] to the positive (+) terminal of the booster battery . Connect the other end of the same cable (Item 1) [B] to the positive terminal on the loader battery.

2

Connect the end of the second cable (Item 2) [A] to the negative (–) terminal of the booster battery. Connect the other end of the same cable (Item 2) [B] to the starter mounting bolt that is grounded to the loader.

P–1612

Keep cables away from moving parts. Start the engine (See Cold Temperature Starting Condition, Page 15 or 17).

C

After the engine has started, remove the ground (–) cable (Item 2) [B] first. Remove the cable from the positive terminal on the loader battery.

Dealer Copy -- Not for Resale

W–2066–1296

Damage to the alternator can occur if:

• Engine is operated with battery cables

P–1611

disconnected.

• Battery cables are connected when using a fast charger or when welding on the loader.

(Remove both cables from the battery.)

• Extra battery cables (booster cables) are connected wrong.

D

I–2023–1285

Battery Removal And Installation Open the rear door.

Disconnect the negative (–) battery cable [C].

Disconnect the positive (+) battery cable [D].

65 of 100

P–1609

–47–

753L Bobcat Loader Operation & Maintenance Manual

ELECTRICAL SYSTEM (Cont’d)

A

Battery Removal And Installation (Cont’d) Remove the battery holddown clamp [A].

P–1614

P–1613

Always clean the terminals and cable ends when installing a new battery [C].

C

When installing the battery in the loader,do not touch any metal parts with the battery terminal posts.

Connect and tighten the battery cables. Connect the negative (–) cable last to prevent sparks.

P–09589

66 of 100

–48–

P–09590

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

B

Remove the battery from the loader [B].

HYDRAULIC/HYDROSTATIC SYSTEM

A

Checking And Adding Fluid Use only recommended fluid in the hydraulic system (See SPECIFICATIONS for the correct fluid, Page 73).

2

To check the reservoir, use the following procedure: Put the Bobcat loader on a level surface. Lower the lift arms and tilt the Bob–Tach fully back.

1

Stop the engine.

Remove the dipstick (Item 1) [A].

P–3406

The fluid level must be between the marks on the dipstick [B].

B

P–3407

C

Clean the reservoir fill screen [C].

Add the fluid as needed to bring the level to the top mark on the dipstick [C].

Dealer Copy -- Not for Resale

If fluid is needed, remove the fill cap (Item 2) [A].

P–3408

Hydraulic/Hydrostatic Filter Replacement

D

See the SERVICE SCHEDULE Page 31 for the correct service interval.

Open the rear door.

Use a filter wrench and remove the filter element (Item 1) [D].

1

Clean the surface of the filter housing where the element seal contacts the housing. Put clean oil onthe rubber seal of the filter element.

Install and hand tighten the filter element.

P–1584 67 of 100

–49–

753L Bobcat Loader Operation & Maintenance Manual

HYDRAULIC/HYDROSTATIC SYSTEM (Cont’d)

A

Hydraulic Fluid Replacement See the SERVICE SCHEDULE Page 31 for the service interval.

1

The fluid must also be replaced if it becomes contaminated or after major repairs.

Remove the reservoir fill cap (Item 1) [A].

NOTE: Be sure the rubber gasket is installed on the fill cap [A].

Raise the operator cab (Page 33).

P–3406

Disconnect the hose (Item 1)[B] from the case drain filter and plug the filter and case drain hose.

B

Remove the case drain filter (Item 2) [B] and drain the fluid into a container.

Replace both hydrostatic motor case drain filters (Item 2) [B]; (Item 1) [C].

When all the fluid is removed from the reservoir , reconnect the hose to case drain filter on the reservoir.

1

Add the correct fluid to the reservoir until the fluid level is between the marks on the dipstick. DO NOT fill above the top mark on the dipstick.

P–3267

C Diesel fuel or hydraulic fluid under pressure can penetrate skin or eyes, causing serious injury or death. Fluid leaks under pressure may not be visible. Use a piece of cardboard or wood to find leaks. Do not use your bare hand. Wear safety goggles. If fluid enters skin or eyes, get immediate medical attention from a physician familiar with this injury.

1

W–2072–0496

Always clean up spilled fuel or oil. Keep heat, flames, sparks or lighted tobacco away from fuel and oil. Failure to use care around combustibles can cause explosion or fire which can result in injury or death.

P–1645

W–2103–1285

68 of 100

–50–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

2

Replace the hydraulic/hydrostatic filter element.

HYDRAULIC/HYDROSTATIC SYSTEM (Cont’d)

A

Hydraulic Fluid Replacement (Cont’d) Start the engine and operate the loader hydraulic controls. Stop the enigne. Check for leaks. Check the fluid level in the reservoir and add as needed.

Hydraulic Reservoir Breather Cap See SERVICE SCHEDULE Page 31 for the correct service interval.

Remove the breather cap [A].

P–1635

NOTE: Check to make sure the rubber gasket (Item 1) [B] is installed on the fill cap.

B

Remove the filter (Item 2) [B] from the breather cap and clean it.

1

3

2 P–1502

69 of 100

–51–

P–1643

Dealer Copy -- Not for Resale

Make sure the baffle washer (Item 3) [B] is installed in the hydraulic reservoir.

753L Bobcat Loader Operation & Maintenance Manual

SPARK ARRESTOR MUFFLER

A

See the SERVICE SCHEDULE Page 31 for service interval for cleaning the spark arrestor muffler.

Do not operate the loader with a defective exhaust system.

1 This loader is factory equipped with a U.S.D.A. Forestry Service approved spark arrestor muffler. It is necessary to do maintenance on this spark arrestor muffler to keep it in working condition. The spark arrestor muffler must be serviced by dumping the spark chamber every 100 hours of operation.

If this machine is operated on flammable forest, brush or grass covered land, it must be equipped with a spark arrestor attached to the exhaust system and maintained in working order. Failure to do so will be in violation of California State Law, Section 4442 PRC.

When an engine is running in an enclosed area, fresh air must be added to avoid concentration of exhaust fumes. If the engine is stationary, vent the exhaust outside.

Exhaust fumes contain odorless, invisible gases which can kill without warning.

Make reference to local laws and regulations for spark arrestor requirements.

I–2022–0595

W–2050–1285

Stop engine and allow the muffler to cool before cleaning the spark chamber. Wear safety goggles. Failure to obey can cause serious injury.

Stop the engine. Open the rear door and rear grill.

Remove the plug (Item 1) [A] from the bottom of the muffler.

W–2011–1285

Never use machine in atmosphere with explosive dust or gases or where exhaust can contact flammable material. Failure to obey warnings can cause injury or death.

W–2068–1285

When the engine is running during service, the steering levers must be in neutral and the parking brake engaged. Failure to do so can cause injury or death.

W–2006–0284

Start the engine and run for about 10 seconds while a second person, wearing safety glasses, holds a piece of wood over the outlet of the muffler.

Stop the engine.

Put anti–seize coating on plug.

Install and tighten the plug. Close the rear door.

70 of 100

–52–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

P–1593

TIRE MAINTENANCE

A

Wheel Nuts See the SERVICE SCHEDULE Page 31 for the service interval to check the wheel nuts. The correct torque is 105–115 ft.–lbs. (142–156 Nm) torque [A].

P–1535

Tire Rotation

B

Check the tires regularly for wear, damage and pressure (See SPECIFICATIONS for the correct tire pressure, Page 73).

It is important to keep the same size tires on each side of the loader to avoid excessive wear. If different sizes are used, each tire will be turning at a different speed and cause excessive wear. The tread bars of all the tires must face the same direction.

Recommended tire pressure must be maintained to avoid excessive tire wear and loss of stability and handling capability. Check for the correct pressure before operating the loader.

B–9976

Tire Mounting Tires are to be repaired only by an authorized person using the proper procedures and safety equipment. Tires and rims must always be checked for correct size before mounting. Check rim and tire bead for damage.

Dealer Copy -- Not for Resale

Rear tires usually wear faster then front tires. T o keep tire wear even, move the front tires to the rear and rear tires to the front [B].

The rim flange must be cleaned and free of rust. The tire bead and rim flange must be lubricated with a rubber lubricant before mounting the tire, avoid excessive pressure which can rupture the tire and cause serious injury or death. During inflation of the tire, check the tire pressure frequently to avoid over–inflation.

Do not inflate tires above specified pressure.

Failure to use correct tire mounting procedure can cause an explosion which can result in injury or death.

W–2078–1285

71 of 100

–53–

753L Bobcat Loader Operation & Maintenance Manual

FINAL DRIVE TRANSMISSION (CHAINCASE)

A

753LOperation&MaintenanceManual#6722925–PreventiveMaintenanceSectionPart1of2

Checking And Adding Oil

1

The chaincase contains the final drive sprockets and chains and uses the same type of oil as the hydraulic/hydrostatic system (See SPECIFICATIONS Page 73).

Park the loader on a level surface. Stop the engine.

Remove the plug (Item 1) chaincase housing.

[A] from the front of the

If oil can be reached with the tipof the your finger through the hole the oil level is correct.

If the level is low, add oil through the check plug hole until the oil flows from the hole. Install and tighten the plug.

P–1551

B

Removing Oil From The Chaincase

1

P–1616

C

Remove the drain plug (Item 1) [C] at the rear of the chaincase and drain the oil into a container.

NOTE: When installing the drain plug into the chaincase, always use a NEW drain plug.

1

P–1619

FAN GEARBOX

D

See the SERVICE SCHEDULE Page 31 for the correct service interval.

1

Raise the operator cab (Page 33).

Remove the plug (Item 1) [D] to check the lubricant level.

If the level is low, add SAE 90W gear lube through the check plug hole until the lubricant flows from the hole.

Install and tighten the plug.

P–1498 72 of 100

–54–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Remove the cover which is installed over the drain plug [B].

DRIVE BELT

A

Adjustment The tools listed will be needed to do the following procedure:

1

MEL–1405 – Bar MEL–1406 – Spring Scale See the SERVICE SCHEDULE Page 31 for the service interval.

To adjust the drive belt between the engine flywheel and the hydrostatic pump pulley, use the following procedure:

1

Stop the engine. Open the rear door.

Disconnect the negative (–) battery cable.Remove the belt shield holddown clips (Item 1) [A].

P–1617

B

P–3394

Use the correct tools to adjust the idler tensioner and the drive belt.

C

The idler tensioner is located between the flywheel and pump pulley. Loosen the bolt (Item 1) [C] at the pulley tensioner.

Use the end of the belt tensioning tool (MEL–1405) to move the tension pulley down (See Inset) [C].

Dealer Copy -- Not for Resale

Remove the belt shield [B].

1 P–1662

Tighten the bolt at the pulley tension bracket [C].

P–1618

Install the Belt Tension Bar (MEL–1405) on the drive belt [D].

D

The pin (Item 1) [D] must be pulled tight against the engine drive pulley.

Make a mark (Item 2)[D] on the cast flangejust below the tool handle.

2

1 73 of 100

–55–

P–0593

753L Bobcat Loader Operation & Maintenance Manual

DRIVE BELT (Cont’d)

A

Adjustment (Cont’d) Use a spring scale and install on the tool handle. The line of pull on the spring scale must be at a right angle or perpendicular to the tool handle as shown [A].

NEW BELT: A new belt is one with a 1/2 hour or less of operating time. With 15 lbs. (67 N) of force the tool should move 1.25’’ (32 mm) (the width of the tool handle).

NOTE: When a NEW belt is installed, run the engine for approximately 5 minutes. Then the belt tension must be checked and adjusted to 15 lbs. (67 N) spring scale force.

P–3396

USED BELT: With 12 lbs. (53 N) of force, the tool should move 1.25’’ (32 mm) (the width of the tool handle), if not, readjust pulley tensioner.

B

Drive Belt Replacement Stop the engine. Open the rear door.

Remove the fan drive belt.

Remove the negative (–) cable from the battery.

Remove the battery if necessary (Page 47).

Remove the belt shield holddown clips.

P–3394

Remove the belt shield [B].

C

The pulley tensioner is located between the flywheeland pump pulley. Loosen and remove the bolt (Item 1) [C] from the pulley tensioner.

1

Remove the pulley tensioner assembly.

P–1618

Remove the drive belt from the pump pulley and flywheel.

Remove the drive belt from the loader [D].

D

Install the new drive belt. Install the pulley tensioner assembly.

Adjust the drive belt as shown in adjustment procedure (Page 55).

P–1615 74 of 100

–56–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

Raise the operator cab (Page 33).

LUBRICATION OF THE BOBCAT LOADER

A

Lubricate the loader as specified in the SERVICE SCHEDULE Page 31 for the best performance of the loader.

Record the operating hours each time you lubricate the Bobcat loader.

1

Always use a good quality lithium based multi–purpose grease. Apply lubricant until extra grease shows.

Lubricate the following locations on the loader: 1. Rod End Lift Cylinder (Both Sides) [A].

P–1532

2. Base End Lift Cylinder (Both Sides) [B].

2

P–3400

C

3. Lift Arm Pivot Pin (Both Sides) [C].

Dealer Copy -- Not for Resale

B

3

P–3395

D

4. Base End Tilt Cylinder [D].

4

P–1540 75 of 100

–57–

753L Bobcat Loader Operation & Maintenance Manual

LUBRICATION OF THE BOBCAT LOADER (Cont’d)

A

5. Rod End Tilt Cylinder [A].

5 P–0861

B

6. Bob–Tach Pivot Pin (Both Sides) [B].

7. Bob–Tach Wedge (Both Sides) [B].

7 P–1564

C

8. 250 Hours: Steering Lever Shaft (2) [C].

8

P–1533

PIVOT PINS

D

All lift arm and cylinder pivots have a large pin held in position with a retainer bolt and nut (Item 1) [D].

Check that the lock nuts are tightened to 18–20 ft.–lbs.

(24–27 Nm) torque.

P–1529 76 of 100

–58–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

6

BOB–TACH

A

Inspection and Maintenance Move the Bob–Tach levers to engage the wedges [A].

The levers and wedges must move freely.

1

The wedges must extend through the holes in the attachment mounting frame (Item 1) [A].

N–17022

N–17027

Bob–Tach wedges must extend through the holes in attachment. Lever(s) must be fully down and locked. Failure to secure wedges can allow attachment to come off and cause injury or death.

B

W–2102–0497

If the wedge does not contact the lower edge of the hole [B] and [C], the attachment will be loose and can come off the Bob–Tach.

1 N–17023

C

Bob–Tach Wedge

Dealer Copy -- Not for Resale

The spring loaded wedge (Item 1) [A] must contact the lower edge of the hole in the attachment(Item 1) [B] and [C].

Wedge Must Contact Lower Edge Of Hole In The Attachment

Inspect the mounting frame on the attachment and the Bob–Tach, linkages and wedges for excessive wear or damage [D]. Replace any parts that are damaged, bent, or missing. Keep all fasteners tight.

D

Look for cracked welds. Contact your Bobcat dealer for repair or replacement parts.

Lubricate the wedges (SeeSERVICE SCHEDULE, Page 31 and LUBRICATION OF THE BOBCAT LOADER, Page 57).

TS–01062 77 of 100

–59–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

753LOperation&MaintenanceManual#6722925–PreventiveMaintenanceSectionPart2of2

78 of 100

–60–

753L Bobcat Loader Operation & Maintenance Manual

SYSTEMS ANALYSIS

SYSTEMS ANALYSIS

79 of 100

–61–

Dealer Copy -- Not for Resale

SERVICE CODES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63 ....

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 80 of 100

–62–

753L Bobcat Loader Operation & Maintenance Manual

SERVICE CODES The following list references the defect codes that are transmitted to the instrument panel display which can occur. Some service procedures for correcting the problems can be found in this manual and other procedures must be performed ONL Y BY QUALIFIED BOBCAT SERVICE PERSONNEL.

Instructions are necessary before operating or servicing machine. Read Operation & Maintenance Manual, Handbook and signs (decals) on machine. Follow warnings and instructions in the manuals when making repairs, adjustments or servicing. Check for correct function after adjustments, repairs or service. Failure to follow instructions can cause injury or death.

SUBJECT

DISPLAY READS

CONDITION

Engine Coolant Level

ECL 1

SHUTDOWN, No Coolant

Engine Coolant Temp.

EC–1.1 EC–2.1

SHUTDOWN, Engine Temperature WARNING, Engine Temperature

EC 3 EC 4 EC 5 EC 7

Wiring Not Connected Wiring Shorted High Sensor Voltage Sensor Out Of Range

EP 1 EP 2 EP 3

SHUTDOWN, Pressure WARNING, Pressure Wiring Not Connected

Engine Speed

EP 4 EP 5 EP 7 ES 1

Wiring Shorted High Sensor Voltage Sensor Out Of Range SHUTDOWN, Engine Speed Too High

Air Filter

ES–2.1 ES–6 ES–7 AF 2

WARNING, Engine Speed Slightly High Sensor No Signal Sensor Out Of Range WARNING, Restriction Too High

AF 6 b–2.1 b–2.2 FUEL2

Sensor No Signal WARNING, Bad Battery WARNING, Battery Voltage WARNING, Low Level

FUEL3 FUEL4 FUEL5

Wiring Not Connected Wiring Shorted High Sensor Voltage

FUEL7

Sensor Out Of Range

Engine Oil Pressure

Battery Fuel Level

81 of 100

–63–

Dealer Copy -- Not for Resale

W–2003–0797

753L Bobcat Loader Operation & Maintenance Manual

753LOperation&MaintenanceManual#6722925–SystemAnalysisSection

DISPLAY READS

CONDITION

Hydrostatic Charge Filter Condition

HF1–2 HF1–6

WARNING, High Restriction Sensor No Signal

Hydrostatic Fluid

HP 1 HP 2 HP 3 HP 4

SHUTDOWN, Pressure WARNING, Pressure Wiring Not Connected Wiring Shorted

HP 5 HP 7 HC 1

High Sensor Voltage Sensor Out Of Range SHUTDOWN, Temperature

HC 2 HC 3 HC 4 HC 5

WARNING, Temperature Wiring Not Connected Wiring Shorted High Sensor Voltage

HC 6 HC 7

Sensor No Signal Sensor Out Of Range

Hydrostatic Fluid Temperature

82 of 100

–64–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

SUBJECT

MACHINE SIGN TRANSLATIONS IMPORTANT (6560573) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 ....

WARNING (6579511) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 ....

SERVICE SCHEUDLE (6578218) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 ...

WARNING (6579510) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 ....

Dealer Copy -- Not for Resale

WARNING (6579528, 6577754, 6579639, 6579509) . . . . . . . . . . . . . . . . . .72 .

MACHINE SIGN TRANSLATIONS

83 of 100

–65–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 84 of 100

–66–

753L Bobcat Loader Operation & Maintenance Manual

IMPORTANTE (SPANISH) ESTA MAQUINA EST A EQUIPADA POR LA FABRICA CON UN AMOR TIGUADOR DE CHISPAS DEL SILENCIADOR, APROBADO POR EL SER VICIO DE SILVICULTURA DEL U.S.D.A. (DEPARTMENTO DE AGRICULTURA DE LOS ESTADOS UNIDOS).

ES NECESARIO LIMPIAR ESTE AMORTIGUADOR DE CHISP AS DEL SILENCIADOR PARA MANTENERLO EN BUEN ESTADO. HAY QUE DARLE SERVICIO AL AMORTIGUADOR, VACIANDO LA CAMARA DE CHISPAS CADA 100 HORAS DE FUNCIONAMIENTO.

REFIERASE A LAS LEYES Y REGULACIONES LOCALES EN CUANTO A LOS REQUISITOS DEL AMORTIGUADOR DE CHISPAS.

IMPORTANT (FRENCH) CETTE CHARGEUSE EST EQUIPPEE A LA SOR TIE DE L’USINE D’UN SILENCIEUX P ARA–ETINCELLES APPROUVE PAR LE SER VICE DES EAUX ET FORETS DES ETATS–UNIS. IL EST INDISPENSABLE D’EFFECTUER UN ENTRETIEN REGULIER DE CE P ARE–ETINCELLES AFIN DE LE GARDER EN BON ET AT DE MARCHE. L’ENTRETIEN CONSISTE A VIDER LA CHAMBRE A ETINCELLES TOUTES LES 100 HEURES DE MARCHE.

Dealer Copy -- Not for Resale

SI ESTA MAQUINA ESTA DESTINADA PARA TRABAJAR EN BOSQUES, MA TORRALES O EN PASTOS QUE PUEDAN INCENDIARSE, ENTONCES TIENE QUE ESTAR EQUIPADA CON UN AMORTIGUADOR DE CHISPAS EN EL SISTEMA DEL ESCAPE Y TIENE QUE MANTENERSE EN PERFECTAS CONDICIONES DE TRABAJO. ES NO HACER ESTO CONSTITUYE UNA INFRACCION DE LA LEY ESTATAL DE CALIFORNIA, SECCION 4442, PRC.

SI CET ENGIN EST UTILISE SUR UN TERRAIN COUVER T D’ARBRES, DE BROUSSAILLES, OU D’HERBAGES INFLAMMABLES, IL F AUT INSTALLER LE PARE–ETINCELLES ET LE GARDER EN BON ET AT DE MARCHE. CONSULTER LES REGLEMENT ATIONS APPLICABLES.

85 of 100

LOCALES

–67–

753L Bobcat Loader Operation & Maintenance Manual

ADVERTENCIA (SPANISH) EVITE HERIDAS O LA MUERTA

• Mantenga le puerta cerrada excepto para dar servicio.

• Mantenga el motor limpio y que no tenga material inflamable.

• Mantenga el cuerpo. objetos sueltos y la ropa lejos de los conductores eléctricos, piezas móviles, piezas calientes y del escape.

• No use el cargador en lugares donde

hay polvo o gases explosivos o materiales inflamables cerca al escape.

• Todos los gases del escape pueden

matar. Ventile siempre el lugar de trabajo.

• No use nunca éter o líquido del arranque en los motores • Les liquides sous pression peuvent pénétrer au travers ed

• Escapes de líquido bajo presión pueden penetrat en la

piel y causar heridas graves. Se requiere atención médica inmediata. Use gafas. Use cartón para revisar si hay fugas.

er de

• L’acide des batteries provoque de graves brûlures, porter des lunettes de sécurité. S’il entre en contact avec le s yeux, la peau ou les vêtements, rincer généreusement à l’eau. Pour les yeux, appeler un médecin.

• El ácido de la batería puede causar quemaduras severas, • Les batteries dégagent des use gafas. Si el ácido hace contacto con los ojos, la piel o la ropa, lávelos bién con agua. Si el contactor fuel en los ojos, lávelo bién y vaya al médico.

• Las baterias producen gas inflammable y

explosivo.

Mantenga lejos, arcos, chispas, llamas y tabaco encendido.

• Para arranque con batería auxiliar, conecte de último el

cable negativo al motor del cargador (nunca la batería).

Despues de hacer el arranque con cables, quite peimero la conección negativa del motor.

gaz inflammables et explosifs. Tenir les arcs électriques les étincelles, les flammes et las cigarettes allumées à l’écart.

• En cas de démarrage par pontage, effectuer le dernier branchement (Câble négatif) au moteur (jamais à la batterie). Pour débrancher, déconnecter d’abord le câble négatif du moteur.

• Ne jamais utiliser d’éther ou de liquide de démarrage sur un moteur diesel avec des bougies de préchauf fage.

N’employer que les aides au démarrage approuvées par le fabricant.

AVERTISSEMENT (FRENCH) EVITER LES BLESSURES, VOIRE LA MORT

• Maintenir la porte arrière fermée, sauf pour les entretiens.

• Débarasser le moteur de toute matière inflammable.

• Maintenir le corps, les objets non

attachés et les vêtements à l’écart des contacts électriques, des pièces mobiles et brûlantes et de l’échappement.

• Ne pas utiliser la machine dans un

endroit chargé de poussières ou de gaz explosifs, et où l’échappement risque de toucher des matériaux inflammables.

• Les gaz d’échappement peuvent être mortels. T oujours aérer.

86 of 100

–68–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

la peau et causer de graves blessures. Consult immédiatement un médecin Porter des lunettes sécurité. Utiliser du carton pour repérer les fuites.

de diesel que tienen tapones encendedores. Use solamente las ayudas para el arranque que sean aprobados por el fabricante del motor.

Dealer Copy -- Not for Resale 87 of 100

–69–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 88 of 100

–70–

753L Bobcat Loader Operation & Maintenance Manual

ATTENTION (FRENCH)

EVITE HERIDAS O LA MUERTE

EVITER LES BLESSURES OU LA MORT

NO USE NUNCA EL CARGADOR SIN LEER LAS INSTRUCCIONES. LEA EL MANUAL DEL OPERA TIO, EL MANUAL DE SERVICIO Y LA GIA DEL OPERARIO.

NE JAMAIS SE SER VIR DE LA CHARGEUSE SANS INSTRUCTIONS. LIRE LE MANUEL DE L’OPERATEUR EL D’ENTRETIEN AINSI QUE LE GUIDE D’UTILISATION.

NO VIAJE O DE LA VUEL TA CON LOS BRAZOS DE ELEVACION ARRIBA. CARGUE, DESCARGUE Y DE LA VUELTA ESTANDO EN UN SITIO PLANO Y NIVELADO. NO EXCEDA LA CAP ACIDAD NOMINAL DE FUNCIONAMIENTO (VEA EL A VISO EN EL CARGADOR).

NE PAS SE DEPLACER NI VIRER AVEC LE BRAS RELEVES. CHARGER, DECHARGER ET VIRER SUR UN SOL PLA T ET HORIZONTAL. NE PAS DEPASSER LE CAP ACITE NOMINALE (CONSULTER L’AUTOCOLLANT APPOSE SUR LA CARGEUSE).

USE LA BARRA DEL ASIENTO. ASEGURESE BIEN EL CINTURON DE SEGURIDAD.

UTILISER L’ARCEAU DE SECURITE. ATTACHER SOIGNEUSEMENT LA CEINTURE DE SECURITE.

NUNCA MODIFIQUE EL EQUIPO NI USE ADITAMENTOS QUE NO ESTEN APROBADOS POR LA COMPAÑIA MELROE. MANTENGA LOS PIES EN LOS PEDALES.

NE JAMAIS MODIFIER L’EQUIPEMENT NI SE SERVIR D’ACCESSOIRES QUE NE SONT P AS APPROUVES PAR MELROE COMPANY. MAINTENIR LES PIEDS SUR LES PEDALES.

EN LA PENDIENTES, MANTENGA EL EXTREMO PESADO DE CARGADOR EN POSICION ASCENDENTE.

DANS LES PENTES, T OUJOURS MAINTENIR LA PARTIE LA PLUS LOURDE DE LA CHARGEUSE VERS LE HAUT.

ANTES DE BAJARSE DEL CARGADOR 1. BAJE LOS BRAZOS DE ELEVACION. COLOQUE EL ADITAMENTO BEIN EN EL SUELO. 2. PARE EL MOTOR

POUR QUITTER LA CHARGEUSE: 1. ABAISSER LES BRAS DE LEVAGE. POSER L’EQUIPEMENT A PLATE SUR LE SOL. 2. ARRETER LE MOTEUR.

3. PONGA EL FRENO.

3. ENCLENCHER LE FREIN DE STATIONNEMENT.

4. LEVANTE LA BARRA DEL ASIENTO. MUEVA LOS PEDALES HAST A QUE AMBOS SE TRABEN.

89 of 100

Dealer Copy -- Not for Resale

ADVERTENCIA (SPANISH)

–71–

4. RELEVER L’ARCEAU DE SECURITE. DEPLACER LES PEDALES JUSQU’A CE QU’ELLES SOIENTE T OUTES DEUX VERROILLEES. 753L Bobcat Loader Operation & Maintenance Manual

753LOperation&MaintenanceManual#6722925–MachineSignTranslationsSection

ADVERTENCIA (SPANISH) EVITE HERIDAS O LA MUERTE LLEVE LA CARGA EN POSICION BAJA

PELIGRO (SPANISH)

EL NO OBEDECER EST A ADVERTENCIA PUEDE CAUSAR LADEAMIENTO O VUELCOS O PERDIDAD DE LA CARGA Y DE LA VISIBILIDAD.

EVITE LA MUERTE

• MANTENGASE RETIRADO DE ESTA AREA CUANDO

AVERTISSEMENT (FRENCH)

LOS BRAZOS DE ELEVACION ESTAN ELEVADOS, A MENOS QUE ESTEN TRABADOS POW EL T OPE. • EL MOVER EL PIE DEL PEDAL O F ALLA DE UNA PIEZA PUEDEN CAUSAR LA CAIDA DE LOSBRAZOS DE ELEVACION.

EVITER DES BLESSURES OU LA MORT TENIR LA CHARGE VERS LE BAS. LE NON RESPECT PEUT ENTRAINER UN BASCULEMENT OU UN RENVERSEMENT DE LA MACHINE, UNE PERTE DE LA CHARGE OU DE VISIBILITE.

EVITER LA MORT

• EVITER CETTER ZONE LORSQUE LES BRAS D

E LEVAGE RELEVÉS NE SONT P AS ASSURÉS PAR DES ARRETS DE BRAS DE LEVAGE. • UNE PEDALE ACTIONNÉE OU UNE PICE DEFECTUEUSE. PEUT PROVOQUER L’ABAISSEMENT DES BRAS DE LEVAGE.

ADVERTENCIA (SPANISH) EL CILINDRO CONTIENE GAS BAJO AL TA PRESION. EL ABNRIR EL CILINDRO PUEDE SOLTAR LA VARILLA Y CAUSAR HERIDAS O LA MUERTE.

AVERTISSEMENT (FRENCH)

PELIGRO (SPANISH)

LES VERINS RENFERMENT UN GAZ SOUS PRESSION. NE JAMAIS OUVRIR UN VERIN CAR LA TIGE RISQUE DE S’ECHAPPER BRUTALEMENT ET DE CAUSER DES BLESSURES OU MEME LA MORT.

EVITE LA MUERTE • EL FORZAR EL IMPLEMENT O CONTRA EL SUELO HACE QUE LA RUEDDAS DELANTERAS SE ELEVEN. • NUNCA SE MET A DEBAJO NI ALCANCE NADA DEBAJO DE LOS BRAZOS DE ELEV ACION O DEL CILINDRO DE ELEVACION SIN QUE ESTE INSLADO UN TOPE APROBADO EN LOS BRAZOS D E ELEVACION.

DANGER (FRENCH) EVITER LA MORT

• L’ACCESSOIRE PEUT ETRE APPUYE CONTRE LE SOL ET SOULEVER LES ROUES AVANT.

• NE JAMAIS ALLER SOUS NI METTRE LES MAINS SOUS LES BRAS OU LE VERIN DE LEV AGE SANS QU’UN ARRET DE BRAS DE LEVAGE APPROUVE SOIT INSTALLE.

90 of 100

–72–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

DANGER (FRENCH)

SPECIFICATIONS ADDITIONAL PUBLICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 ...

CAPACITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 .....

DRIVE SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 ....

ELECTRICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 .....

ENGINE SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 ...

HYDRAULIC SYSTEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 ....

LOADER DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 ....

OPERATION & PERFORMANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 ...

Dealer Copy -- Not for Resale

TIRES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 .....

SPECIFICATIONS

91 of 100

–73–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 92 of 100

–74–

753L Bobcat Loader Operation & Maintenance Manual

• Dimensions are given for loader equipped with standard tires and dirt bucket.

LOADER SPECIFICATIONS

Dimensions may vary with other types. All dimensions are shown in inches. Respective metric dimensions are given in millimeters enclosed by parentheses.

• Where applicable, specifications conform to SAE standards and are subject to change without notice.

LOADER DIMENSIONS

68.14 (1731) 92°

78.49 (1994)

148.21 (3765)

44°

46.81 (1189) 114.51 (2909) 16.53 (420)

76.31 (1938)

86.36 (2194)

62.23 (1581)

25°

7.5 (191)

54.5 (1384) 66.0 (1676)

40.56 (1030) 101.65 (2582) 130.09 (3304)

MC–1992

Dealer Copy -- Not for Resale

26°

This loader was designed without counterweights or ballasts. Changes of structure or weight distribution of the loader can cause changes in control and steering response and can cause failure of the loader parts.

OPERATIONS & PERFORMANCE Weights Operating Weight . . . . . . . . . . . . . . . . . . .

Rated Operating Capcity . . . . . . . . . . . . .

Tipping Load . . . . . . . . . . . . . . . . . . . . . . .

5368 lbs. (2435 kg) 1500 lbs. (680 kg) 3000 lbs. (1361 kg)

Travel Speed . . . . . . . . . . . . . . . . . . . . . . . .

Infinitely variable 0–7.0 MPH (11,3 km/hr.)

Controls Vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Loader Function . . . . . . . . . . . . . . . . . . . .

Engine Main Drive . . . . . . . . . . . . . . . . . . . . . . . . .

Parking Brake . . . . . . . . . . . . . . . . . . . . . .

Direction & speed controlled by two hand levers.

Lift, tilt functions controlled by separate foot pedals. Auxiliary functions controlled by electrical push buttons on right steering lever .

Hand lever throttle; key–type starter switch; Hydrostatic Mechanical disc, foot operated pedal

ENGINE Make . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Horsepower . . . . . . . . . . . . . . . . . . . . . . . .

Maximum Governed RPM . . . . . . . . . . . .

Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Number of Cylinders . . . . . . . . . . . . . . . . .

Bore/Stroke . . . . . . . . . . . . . . . . . . . . . . . .

Displacement . . . . . . . . . . . . . . . . . . . . . . .

Cooling System . . . . . . . . . . . . . . . . . . . . .

Lubrication . . . . . . . . . . . . . . . . . . . . . . . . .

Crankcase Ventilation . . . . . . . . . . . . . . . .

Air Cleaner . . . . . . . . . . . . . . . . . . . . . . . . .

Ignition . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Low Idle . . . . . . . . . . . . . . . . . . . . . . . . . . .

High Idle . . . . . . . . . . . . . . . . . . . . . . . . . . .

Kubota V2203–TV–B–MELROE–1 Diesel 46 HP (34,3 kW) 2800 RPM 102.5 ft.–lbs. (139 Nm) @ 1600 RPM Four 3.43/3.64(87,0/92.5) 134.0 cu.in. (2197 cu. cm.)

Liquid Pressure System W/Filter External Dry replaceable cartridge, dual safety element Diesel–Compression 1150 RPM 2950–3050 RPM

93 of 100

–75–

753L Bobcat Loader Operation & Maintenance Manual

LOADER SPECIFICATIONS (Cont’d) HYDRAULIC SYSTEM Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pump Capacity . . . . . . . . . . . . . . . . . . . . .

System Main Relief . . . . . . . . . . . . . . . . . .

Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Engine driven gear type 15.0 GPM (56,8 L/min.) @ 2850 RPM @ 1150 PSI (7929 kPa) 3000 PSI (20685 kPa) @ Quick Couplers Full flow replaceable #4 micron synthetic medial element

Hydraulic Cylinders . . . . . . . . . . . . . . . . . . .

Doubleacting

Bore Diameter: Lift Cylinder (2) . . . . . . . . . . . . . . . . . . . .

Tilt Cylinder (1) . . . . . . . . . . . . . . . . . . . .

Rod Diameter: Lift Cylinder (2) . . . . . . . . . . . . . . . . . . . .

Tilt Cylinder (1) . . . . . . . . . . . . . . . . . . . .

Stroke: Lift Cylinder (2) . . . . . . . . . . . . . . . . . . . .

Tilt Cylinder (1) . . . . . . . . . . . . . . . . . . . .

26.00 (660) 14.50 (368)

Control Valve . . . . . . . . . . . . . . . . . . . . . . .

Fluid Lines . . . . . . . . . . . . . . . . . . . . . . . . .

3–spool, open center, series type W/float detent on lift & electrical controlled auxiliary SAE standard tubes, hoses & fittings

2.25 (57,2) 3.5 (88,9)

Hydraulic Function Time: Raise Lift Arms to Maximum Height . . . .

Lower Lift Arms from Maximum Height .

Move Empty Bucket to Dump Position .

Move Bucket to Retracted Position . . . .

Fluid Type . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.8 Seconds 3.2 Seconds 2.1 Seconds 1.7 Seconds Bobcat Fluid (P/N 6563328) If fluid is not available, use 10W–30/10W–40 Class SE Motor Oil for temperatures above 0 °F. (–18°C) & 5W–30 Motor Oil for temperatures below 0°F (–18°C).

ELECTRICAL Alternator . . . . . . . . . . . . . . . . . . . . . . . . . .

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Starter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Belt drive, 55 amps. Open 12 volt, 625 cold crank amps. @ 0°F (–18°C) 160 min. reserve capacity 12 volt

DRIVE SYSTEM Transmission . . . . . . . . . . . . . . . . . . . . . . .

Final Drive . . . . . . . . . . . . . . . . . . . . . . . . .

Total Engine to Wheel Reduction . . . . . .

Tandem hydro. pumps infinitely variable, driving 2 fully reversing hydrostatic motors #80 HS roller chain & sprockets in sealed chaincase with oil lubrication 42:09:1

CAPACITIES Cooling System . . . . . . . . . . . . . . . . . . . . .

Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Engine Oil W/Filter . . . . . . . . . . . . . . . . . .

Hydraulic Reservoir . . . . . . . . . . . . . . . . . .

Hydraulic/Hydrostatic System . . . . . . . . .

Chaincase Reservoir . . . . . . . . . . . . . . . .

13 qts. (12,3 L) 14 gals. (53 L) 7.5 qts. (7,1 L) 24.0 qts. (22,7 L) 8.5 gals. (32,2 L) 9 gals. (34,1 L)

TIRES Standard . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pressure . . . . . . . . . . . . . . . . . . . . . . . . . .

Flotation . . . . . . . . . . . . . . . . . . . . . . . . . . .

Pressure . . . . . . . . . . . . . . . . . . . . . . . . . .

10:00–16.5, 8 Ply Rating, Nylon 55 PSI (379 kPa) 31–15.5–15, 8 Ply Rating, Nylon SCL 50 PSI (345 kPa)

94 of 100

–76–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

1.50 (38,1) 1.50 (38,1)

Dealer Copy -- Not for Resale 95 of 100

–77–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale 96 of 100

–78–

753L Bobcat Loader Operation & Maintenance Manual

ADDITIONAL PUBLICATIONS The following publications are also available for your Bobcat Loader. You can order them from your Bobcat dealer.

For the latest information on Bobcat products and the Bobcat Company, visit our website at www.bobcat.com

OPERATOR’S HANDBOOK 6703728

–Introduces operator to step–by–step basics of Skid–Steer loader operation. Also available in Spanish P/N 6724036.

–gives basic operation instruction and safety warnings.

OPERATION & MAINTENANCE MANUAL 6722925 –complete instruction on the correct operation and the routine maintenance of the BOBCAT loader.

SAFETY VIDEO 6724793

–provides basic safety instructions.

Skid–Steer Loader

Dealer Copy -- Not for Resale

SKID STEER LOADER OPERATOR TRAINING COURSE 6722720

SAFETY MANUAL 6556500

EQUIPMENTMANUFACTURERS INSTITUTE 10S.RIVERSIDEPLAZACHICAGO,ILLINOIS60606–37100

SERVICE MANUAL 6720326 –complete maintenance and overhaul instructions for your BOBCAT loader.

–provides basic safety procedures and warnings for your BOBCAT loader. Also available in Spanish P/N 6724451.

PARTS MICROFICHE

–Up–to–date PARTS information is also available. See your BOBCAT dealer.

97 of 100

–79–

753L Bobcat Loader Operation & Maintenance Manual

Dealer Copy -- Not for Resale

753LOperation&MaintenanceManual#6722925–SpecificationsSection

98 of 100

–80–

753L Bobcat Loader Operation & Maintenance Manual

WARRANTY Bobcat Loaders

During the warranty period, the authorized Bobcat dealer shall repair or replace, at its option, without charge for parts and labor, any part of the Bobcat product which fails because of defects in material or workmanship. The owner shall provide the authorized Bobcat dealer with prompt written notice of the defect and allow reasonable time for replacement or repair. Bobcat Company may, at its option, request failed parts to be returned to the factory. Travel time of mechanics and transportation of the Bobcat product to the authorized Bobcat dealer for warranty work are the responsibility of the owner.

The warranty does not apply to tires or other trade accessories not manufactured

by Bobcat Company. The owner shall rely solely on the warranty, if any, of the respective manufacturers thereof. The warranty does not cover replacement of scheduled service items such as oil, filters, tune–up parts, and other high–wear items. The warranty does not cover damages resulting from abuse, accidents, alterations, use of the Bobcat product with any bucket or attachment not approved

by Bobcat Company, air flow obstructions, or failure to maintain or use the Bobcat product according to the instructions applicable to it.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES (EXCEPT THOSE OF TITLE), EXPRESSED OR IMPLIED, AND THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL BOBCAT COMPANY OR THE AUTHORIZED BOBCAT DEALER BE LIABLE FOR DOWNTIME EXPENSES, LOSS OF MACHINE USE OR OTHER INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES.

6570162 (5–00)

99 of 100

Printed in U.S.A.

Dealer Copy -- Not for Resale

Bobcat Company warrants to its authorized dealers and authorized dealers of Bobcat Equipment Ltd., who in turn warrant to the original buyer (owner), that each new Bobcat loader will be free from proven defects in material and workmanship for twelve months after delivery to the original buyer (owner).

100 of 100

Dealer Copy -- Not for Resale