DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1.
Press F2 during boot to enter the Setup Menu.
2.
Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
Information
Main
Security
InsydeH20 Setup Utility Boot Exit
Rev. 3.5 Item Specific Help
Boot priority order: 1. 2. 3. 4. 5. 6.
F1 Help ESC Exit 3.
Use < > or < > to select a device, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu
IDE0 : TOSHIBA MK3265GSX IDE1 : TSSTcorp CDDVDW TS-L633C USB FDD : Network Boot : LEGACY PCI DEVICE USB HDD : USB CDROM :
Select Item Select Menu
F5/F6 Enter
C h a n g e Va l u e s Select SubMenu
F9 F10
Setup Default Save and Exit
Execute the BIOS.BAT batch file to update BIOS.
The flash process begins as shown.
30
Chapter 2
