DOS Flash Utility

Perform the following steps to use the DOS Flash Utility: 1. Press F2 during boot to enter the Setup Menu. 2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move

USB HDD to position 1.

3. Execute the BIOS.BAT batch file to update BIOS. The flash process begins as shown. InsydeH20 Setup Utility Rev. 3.5 Information Main Boot Security Exit

Boot priority order: ItemSpecificHelp

1. IDE0 : TOSHIBA MK3265GSX 2. IDE1 : TSSTcorp CDDVDW TS-L633C 3. USB FDD : 4. Network Boot : LEGACY PCI DEVICE 5. USB HDD : 6. USB CDROM : Use < > or < > to select a device, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu

F1 ESC Help Exit Select Item Select Menu F5/F6 Enter ChangeValues Select SubMenu F9 F10 SetupDefault SaveandExit

4. In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays.

Plug in the AC power to continue. 5. Flash is complete when the message Flash programming complete displays.