REACTIVATING THE BOAT AFTER STORAGE After removing your boat from storage, complete the following operations prior to hitting the water: • • • • • • • • • • •
Check the expiration dates on safety gear such as flares and fire extinguishers. Check all lights on the boat and trailer. Make sure your boat insurance policy is up-to-date. Check the gear lube in the engine lower unit and make sure no water is present. If it is, contact or dealer before starting the motor. Grease all zerk fittings in accordance with the engine owner’s manual. Check the fuel system including tank, fittings, fuel lines and hoses for leaks. Connect the batteries and check all electrical connections. Inspect the steering system linkage and make sure the steering wheel turns freely. Inspect all livewell, baitwell, bilge pump and thru hull fittings and hoses. Backflush all hoses to remove any accumulated debris. If you notice any problems, see Section 9 - Troubleshooting or contact your Alumacraft dealer before using your boat.
64